[DMAAP] Remove AAF dependency

Remove DMaaP NodePorts
Update dmaap-bc postgres setup and dbc-client image used by DCAE
Use the http port of the dbcClient in the dmaapProvisioning job
Signed-off-by: efiacor <fiachra.corcoran@est.tech>
Change-Id: Ie4888b58b6f7e1405ed67625900da89e58b5cb79
Issue-ID: DMAAP-1573
diff --git a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/log/filebeat/filebeat.yml b/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index c8a173c..0000000
--- a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,63 +0,0 @@
-{{/*
-# ============LICENSE_START=======================================================
-#  Copyright (C) 2019 The Nordix Foundation. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# SPDX-License-Identifier: Apache-2.0
-# ============LICENSE_END=========================================================
-*/}}
-
-# dmaap-dr-prov filebeat.yml
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
-  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
-  paths:
-    - /var/log/onap/*/*/*/*.log
-    - /var/log/onap/*/*/*.log
-    - /var/log/onap/*/*.log
-    - /opt/app/datartr/logs/*.log
-  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
-  ignore_older: 48h
-  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
-  clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
-  #List of logstash server ip addresses with port number.
-  #But, in our case, this will be the loadbalancer IP address.
-  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
-  hosts: ["{{.Values.global.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.global.logstashPort}}"]
-  #If enable will do load balancing among available Logstash, automatically.
-  loadbalance: true
-
-  #The list of root certificates for server verifications.
-  #If certificate_authorities is empty or not set, the trusted
-  #certificate authorities of the host system are used.
-  #ssl.certificate_authorities: $ssl.certificate_authorities
-
-  #The path to the certificate for SSL client authentication. If the certificate is not specified,
-  #client authentication is not available.
-  #ssl.certificate: $ssl.certificate
-
-  #The client certificate key used for client authentication.
-  #ssl.key: $ssl.key
-
-  #The passphrase used to decrypt an encrypted key stored in the configured key file
-  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/logback.xml b/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/logback.xml
index 73446ee..9a3c383 100644
--- a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/logback.xml
+++ b/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/logback.xml
@@ -369,15 +369,17 @@
         <appender-ref ref="asyncEELFDebug" />
     </logger>
 
+    <logger name="com.att.eelf.server" level="info" additivity="false">
+      <appender-ref ref="asyncEELFServer" />
+    </logger>
+
     <!-- logger name="com.att.eelf.security" level="info" additivity="false">
       <appender-ref ref="asyncEELFSecurity" />
     </logger>
     <logger name="com.att.eelf.perf" level="info" additivity="false">
       <appender-ref ref="asyncEELFPerformance" />
     </logger>
-    <logger name="com.att.eelf.server" level="info" additivity="false">
-      <appender-ref ref="asyncEELFServer" />
-    </logger>
+
     <logger name="com.att.eelf.policy" level="info" additivity="false">
       <appender-ref ref="asyncEELFPolicy" />
     </logger>
@@ -394,15 +396,11 @@
           <appender-ref ref="asyncEELFDebug" />
     </logger-->
 
-
-
-
-    <root level="{{.Values.config.dmaapDrProv.logLevel}}">
+    <root level="{{.Values.logLevel}}">
         <appender-ref ref="asyncEELF" />
         <appender-ref ref="asyncEELFError" />
         <appender-ref ref="asyncEELFjettylog" />
         <appender-ref ref="asyncEELFDebug" />
         <appender-ref ref="STDOUT" />
     </root>
-
 </configuration>
\ No newline at end of file
diff --git a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/provserver.properties b/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/provserver.properties
index 18ab419..a56de3c 100644
--- a/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/provserver.properties
+++ b/kubernetes/dmaap/components/dmaap-dr-prov/resources/config/provserver.properties
@@ -25,35 +25,20 @@
 
 
 #Jetty Server properties
-org.onap.dmaap.datarouter.provserver.http.port           = {{.Values.config.dmaapDrProv.internalPort}}
-org.onap.dmaap.datarouter.provserver.https.port          = {{.Values.config.dmaapDrProv.internalPort2}}
+org.onap.dmaap.datarouter.provserver.http.port           = {{ .Values.containerPort }}
 org.onap.dmaap.datarouter.provserver.https.relaxation    = true
 
-org.onap.dmaap.datarouter.provserver.aafprops.path       = /opt/app/osaaf/local/org.onap.dmaap-dr.props
+org.onap.dmaap.datarouter.provserver.tlsenabled          = false
+org.onap.dmaap.datarouter.nodeserver.http.port           = 8080
 
 org.onap.dmaap.datarouter.provserver.accesslog.dir       = /opt/app/datartr/logs
 org.onap.dmaap.datarouter.provserver.spooldir            = /opt/app/datartr/spool
 org.onap.dmaap.datarouter.provserver.dbscripts           = /opt/app/datartr/etc/misc
 org.onap.dmaap.datarouter.provserver.logretention        = 30
 
-#DMAAP-597 (Tech Dept) REST request source IP auth
-# relaxation to accommodate OOM kubernetes deploy
-org.onap.dmaap.datarouter.provserver.isaddressauthenabled = false
-
 # Database access
 org.onap.dmaap.datarouter.db.driver   = org.mariadb.jdbc.Driver
 org.onap.dmaap.datarouter.db.url      = jdbc:mariadb://{{ include "common.mariadbService" . }}:{{ include "common.mariadbPort" . }}/{{index .Values "mariadb-galera" "db" "name"}}
 org.onap.dmaap.datarouter.db.login    = ${DB_USERNAME}
 org.onap.dmaap.datarouter.db.password = ${DB_PASSWORD}
 
-# PROV - DEFAULT ENABLED TLS PROTOCOLS
-org.onap.dmaap.datarouter.provserver.https.include.protocols = TLSv1.1|TLSv1.2
-
-# AAF config
-org.onap.dmaap.datarouter.provserver.cadi.enabled = false
-
-org.onap.dmaap.datarouter.provserver.aaf.feed.type        = org.onap.dmaap-dr.feed
-org.onap.dmaap.datarouter.provserver.aaf.sub.type         = org.onap.dmaap-dr.sub
-org.onap.dmaap.datarouter.provserver.aaf.instance         = legacy
-org.onap.dmaap.datarouter.provserver.aaf.action.publish   = publish
-org.onap.dmaap.datarouter.provserver.aaf.action.subscribe = subscribe