Merge "Bump chart version"
diff --git a/kubernetes/aai b/kubernetes/aai
index 39e940f..ab137ca 160000
--- a/kubernetes/aai
+++ b/kubernetes/aai
@@ -1 +1 @@
-Subproject commit 39e940f450e0345d5328a1809bdc42779e9c3cb4
+Subproject commit ab137ca81f5d4f9eb3d442f37f8e7ea52d7757f0
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
deleted file mode 100644
index 551ed34..0000000
--- a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
+++ /dev/null
@@ -1,316 +0,0 @@
-<?xml version = "1.0" encoding = "UTF-8" ?>
-<!--
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
--->
-<included>
- <jmxConfigurator />
- <!-- Example evaluator filter applied against console appender -->
- <property
- name="p_tim"
- value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}" />
- <property
- name="p_lvl"
- value="%level" />
- <property
- name="p_log"
- value="%logger" />
- <property
- name="p_mdc"
- value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
- <property
- name="p_msg"
- value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_exc"
- value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_mak"
- value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
- <property
- name="p_thr"
- value="%thread" />
- <property
- name="defaultPattern"
- value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
- <property
- name="debugPattern"
- value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
-
- <!-- Example evaluator filter applied against console appender -->
- <appender
- name="STDOUT"
- class="ch.qos.logback.core.ConsoleAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <encoder>
- <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
- </pattern>
- </encoder>
- </appender>
-
- <appender
- name="ERROR"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- <file>${logDirectory}/error.log</file>
- <append>true</append>
- <encoder>
- <pattern>${defaultPattern}</pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
- <fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
- </fileNamePattern>
- <maxFileSize>50MB</maxFileSize>
- <maxHistory>30</maxHistory>
- <totalSizeCap>10GB</totalSizeCap>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
-
- <appender
- name="DEBUG"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/debug.log</file>
- <append>true</append>
- <encoder>
- <pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
- <fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
- </fileNamePattern>
- <maxFileSize>50MB</maxFileSize>
- <maxHistory>30</maxHistory>
- <totalSizeCap>10GB</totalSizeCap>
- </rollingPolicy>
- </appender>
-
-
- <appender
- name="AUDIT"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/audit.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/audit.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFAudit"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="AUDIT" />
- </appender>
-
- <appender
- name="METRIC"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/metric.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
- %msg%n</pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/metric.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFMetrics"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="METRIC" />
- </appender>
-
- <!-- SECURITY related loggers -->
- <appender
- name="SECURITY"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/security.log</file>
- <append>true</append>
- <encoder>
- <pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
- </pattern>
- </encoder>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <maxIndex>10</maxIndex>
- <FileNamePattern>${logDirectory}/security.%i.log.zip
- </FileNamePattern>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>10MB</maxFileSize>
- </triggeringPolicy>
- </appender>
- <appender
- name="asyncEELFSecurity"
- class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>256</queueSize>
- <appender-ref ref="SECURITY" />
- </appender>
- <!-- logback jms appenders & loggers definition starts here -->
- <appender
- name="auditLogs"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- </filter>
- <file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
- </encoder>
- </appender>
- <appender
- name="perfLogs"
- class="ch.qos.logback.core.rolling.RollingFileAppender">
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- </filter>
- <file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
- <rollingPolicy
- class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
- </fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>5MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
- </encoder>
- </appender>
-
- <logger
- name="org.onap.aaf"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
- <logger
- name="org.apache"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
- <!-- Spring related loggers -->
- <logger
- name="org.springframework"
- level="DEBUG">
- <appender-ref ref="DEBUG" />
- </logger>
-
- <!-- CLDS related loggers -->
- <logger
- name="org.onap.clamp"
- level="DEBUG">
- <appender-ref ref="ERROR" />
- <appender-ref ref="DEBUG" />
- </logger>
-
- <!-- CLDS related loggers -->
- <logger
- name="com.att.eelf.error"
- level="OFF">
- <appender-ref ref="ERROR" />
- </logger>
- <!-- EELF related loggers -->
- <logger
- name="com.att.eelf.audit"
- level="INFO"
- additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger
- name="com.att.eelf.metrics"
- level="DEBUG"
- additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger
- name="com.att.eelf.security"
- level="DEBUG"
- additivity="false">
- <appender-ref ref="asyncEELFSecurity" />
- </logger>
-
- <!-- logback internals logging -->
- <logger
- name="ch.qos.logback.classic"
- level="INFO" />
- <logger
- name="ch.qos.logback.core"
- level="INFO" />
- <logger
- name="AuditRecord"
- level="INFO"
- additivity="false">
- <appender-ref ref="auditLogs" />
- </logger>
- <logger
- name="AuditRecord_DirectCall"
- level="INFO"
- additivity="false">
- <appender-ref ref="auditLogs" />
- </logger>
- <logger
- name="PerfTrackerRecord"
- level="INFO"
- additivity="false">
- <appender-ref ref="perfLogs" />
- </logger>
- <!-- logback jms appenders & loggers definition ends here -->
-
- <root level="DEBUG">
- <appender-ref ref="DEBUG" />
- <appender-ref ref="STDOUT" />
- </root>
-</included>
diff --git a/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml
index 31175b1..bdae07a 100644
--- a/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml
+++ b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml
@@ -63,7 +63,6 @@
image: "{{ include "common.repository" . }}/{{ .Values.image }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
args:
- - "-Dcom.att.eelf.logging.file=file:/opt/clamp/logback.xml"
- ""
ports:
- containerPort: {{ .Values.service.internalPort }}
@@ -87,9 +86,6 @@
- mountPath: /opt/clamp/sdc-controllers-config.json
name: {{ include "common.fullname" . }}-config
subPath: sdc-controllers-config.json
- - mountPath: /opt/clamp/logback.xml
- name: {{ include "common.fullname" . }}-config
- subPath: logback.xml
env:
- name: SPRING_APPLICATION_JSON
valueFrom:
@@ -113,8 +109,6 @@
items:
- key: sdc-controllers-config.json
path: sdc-controllers-config.json
- - key: logback.xml
- path: logback.xml
- name: {{ include "common.fullname" . }}-filebeat-conf
configMap:
name: {{ include "common.release" . }}-clamp-filebeat-configmap
diff --git a/kubernetes/clamp/charts/clamp-backend/values.yaml b/kubernetes/clamp/charts/clamp-backend/values.yaml
index 153f1e7..ce86ec2 100644
--- a/kubernetes/clamp/charts/clamp-backend/values.yaml
+++ b/kubernetes/clamp/charts/clamp-backend/values.yaml
@@ -27,7 +27,7 @@
# application image
repository: nexus3.onap.org:10001
-image: onap/clamp-backend:5.0.1
+image: onap/clamp-backend:5.0.2
pullPolicy: Always
# flag to enable debugging - application support required
@@ -58,9 +58,7 @@
"clamp.config.policy.pap.url": "https4://policy-pap.{{ include "common.namespace" . }}:6969",
"clamp.config.policy.pap.userName": "healthcheck",
"clamp.config.policy.pap.password": "zb!XztG34",
- "clamp.config.cadi.aafLocateUrl": "https://aaf-locate.{{ include "common.namespace" . }}:8095",
- "com.att.eelf.logging.path": "/opt/clamp",
- "com.att.eelf.logging.file": "logback.xml"
+ "clamp.config.cadi.aafLocateUrl": "https://aaf-locate.{{ include "common.namespace" . }}:8095"
}
# default number of instances
diff --git a/kubernetes/clamp/values.yaml b/kubernetes/clamp/values.yaml
index 1839633..cf6c572 100644
--- a/kubernetes/clamp/values.yaml
+++ b/kubernetes/clamp/values.yaml
@@ -30,7 +30,7 @@
# application image
repository: nexus3.onap.org:10001
-image: onap/clamp-frontend:5.0.1
+image: onap/clamp-frontend:5.0.2
pullPolicy: Always
# flag to enable debugging - application support required