Add SDC DCAE helm charts
Add SDC DCAE helm charts
Change-Id: I2b665a2a957274719a3eefad347951a1361d5064
Issue-ID: OOM-1113
Signed-off-by: Areli, Fuss (af732p) <af732p@att.com>
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore
new file mode 100644
index 0000000..f0c1319
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml
new file mode 100644
index 0000000..28e2500
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Tosca model for component monitoring and descriptors deployment
+name: sdc-dcae-tosca-lab
+version: 3.0.0
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
new file mode 100644
index 0000000..41f9706
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
new file mode 100644
index 0000000..c6cc67e
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/deployment.yaml
@@ -0,0 +1,124 @@
+# Copyright © 2017 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - "sdc-dcae-be"
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ - containerPort: {{ .Values.service.internalPort2 }}
+ {{ if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end }}
+ readinessProbe:
+ httpGet:
+ path: /healthcheck
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ENVNAME
+ value: {{ .Values.global.env.name }}
+ - name: JAVA_OPTIONS
+ value: {{ .Values.config.javaOptions }}
+ - name: HOST_IP
+ valueFrom:
+ fieldRef:
+ fieldPath: status.podIP
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-environments
+ mountPath: /var/opt/dcae-be/chef-solo/environments/
+ - name: {{ include "common.fullname" . }}-localtime
+ mountPath: /etc/localtime
+ readOnly: true
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ # side car containers
+ - name: {{ include "common.name" . }}-filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
+ subPath: filebeat.yml
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ volumes:
+ - name: {{ include "common.fullname" . }}-localtime
+ hostPath:
+ path: /etc/localtime
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-sdc-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-environments
+ configMap:
+ name: {{ .Release.Name }}-sdc-environments-configmap
+ defaultMode: 0755
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
new file mode 100644
index 0000000..6595a04
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/templates/service.yaml
@@ -0,0 +1,56 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "dcae-be",
+ "version": "v1",
+ "url": "/dcae",
+ "protocol": "REST",
+ "port": "{{ .Values.service.internalPort2 }}",
+ "visualRange": "1"
+ }
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.internalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ - port: {{ .Values.service.externalPort2 }}
+ targetPort: {{ .Values.service.internalPort2 }}
+ name: {{ .Values.service.portName2 }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml
new file mode 100644
index 0000000..a22479e
--- /dev/null
+++ b/kubernetes/sdc/charts/sdc-dcae-tosca-lab/values.yaml
@@ -0,0 +1,90 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dcae-tosca-app:1.3-STAGING-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+config:
+ javaOptions: -XX:MaxPermSize=256m -Xmx1024m
+ cassandraSslEnabled: "false"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: sdc-dcae-tosca-lab
+ portName: sdc-dcae-tosca-lab-8085
+ externalPort: 8085
+ internalPort: 8085
+ portName2: sdc-dcae-tosca-lab-8445
+ externalPort2: 8445
+ internalPort2: 8445
+
+ingress:
+ enabled: false
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 4Gi
+ requests:
+ cpu: 10m
+ memory: 1Gi
+ large:
+ limits:
+ cpu: 2
+ memory: 8Gi
+ requests:
+ cpu: 20m
+ memory: 2Gi
+ unlimited: {}
\ No newline at end of file