diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt b/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt
new file mode 100644
index 0000000..7adeb62
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml
new file mode 100644
index 0000000..df5f76a
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/configmap.yaml
@@ -0,0 +1,28 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# #       http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-log-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml
new file mode 100644
index 0000000..b48e8dc
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/deployment.yaml
@@ -0,0 +1,114 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  selector:
+    matchLabels:
+      app: {{ include "common.name" . }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ include "common.release" . }}
+      name: {{ include "common.name" . }}
+      annotations:
+        sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
+    spec:
+     containers:
+     - env:
+       - name: MSB_PROTO
+         value: {{ .Values.config.msbprotocol }}
+       - name: MSB_ADDR
+         value: "{{ .Values.config.msbgateway }}.{{ include "common.namespace" . }}"
+       - name: MSB_PORT
+         value: "{{ .Values.config.msbPort }}"
+       - name: AAI_ADDR
+         value: aai.{{ include "common.namespace" . }}
+       - name: AAI_PORT
+         value: "{{ .Values.config.aai.port }}"
+       - name: AAI_SCHEMA_VERSION
+         value: "{{ .Values.config.aai.schemaVersion }}"
+       - name: AAI_USERNAME
+         value: "{{ .Values.config.aai.username }}"
+       - name: AAI_PASSWORD
+         value: "{{ .Values.config.aai.password }}"
+       - name: SSL_ENABLED
+         value: "{{ .Values.config.ssl_enabled }}"
+       name: {{ include "common.name" . }}
+       volumeMounts:
+       - mountPath: /var/log/onap
+         name: pike-log
+       - mountPath: /opt/pike/pike/pub/config/log.yml
+         name: pike-logconfig
+         subPath: log.yml
+       resources:
+{{ include "common.resources" . | indent 12 }}
+       image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
+       imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+       ports:
+       - containerPort: {{ .Values.service.internalPort }}
+       # disable liveness probe when breakpoints set in debugger
+       # so K8s doesn't restart unresponsive container
+       {{ if .Values.liveness.enabled }}
+       livenessProbe:
+         httpGet:
+           path: /api/multicloud-pike/v0/swagger.json
+           port: {{ .Values.service.internalPort }}
+           scheme: HTTP
+         initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+         periodSeconds: {{ .Values.liveness.periodSeconds }}
+         timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
+         successThreshold: {{ .Values.liveness.successThreshold }}
+         failureThreshold: {{ .Values.liveness.failureThreshold }}
+       {{ end }}
+     # side car containers
+     - image: {{ include "repositoryGenerator.image.logging" . }}
+       imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+       name: filebeat-onap
+       volumeMounts:
+       - mountPath: /usr/share/filebeat/filebeat.yml
+         name: filebeat-conf
+         subPath: filebeat.yml
+       - mountPath: /var/log/onap
+         name: pike-log
+       - mountPath: /usr/share/filebeat/data
+         name: pike-data-filebeat
+
+     volumes:
+     - name: pike-log
+       emptyDir: {}
+     - name: pike-data-filebeat
+       emptyDir: {}
+     - name: filebeat-conf
+       configMap:
+         name: multicloud-filebeat-configmap
+     - name: pike-logconfig
+       configMap:
+         name: {{ include "common.fullname" . }}-log-configmap
+     imagePullSecrets:
+     - name: "{{ include "common.namespace" . }}-docker-registry-key"
+     restartPolicy: Always
diff --git a/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml b/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml
new file mode 100644
index 0000000..503fae3
--- /dev/null
+++ b/kubernetes/multicloud/components/multicloud-pike/templates/service.yaml
@@ -0,0 +1,61 @@
+{{/*
+# Copyright (c) 2018 Intel Corporation.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# #       http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+    msb.onap.org/service-info: '[
+    {
+      "serviceName": "multicloud-pike",
+      "version": "v0",
+      "url": "/api/multicloud-pike/v0",
+      "protocol": "REST",
+      "port": "{{ .Values.service.externalPort }}",
+      "visualRange": "1"
+    },
+    {
+      "serviceName": "multicloud-pike",
+      "version": "v1",
+      "url": "/api/multicloud-pike/v1",
+      "protocol": "REST",
+      "port": "{{ .Values.service.externalPort }}",
+      "visualRange": "1"
+    }
+    ]'
+
+spec:
+  ports:
+  {{if eq .Values.service.type "NodePort" -}}
+  - port: {{ .Values.service.externalPort }}
+    nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+    name: {{ .Values.service.portName }}
+  {{- else -}}
+  - port: {{ .Values.service.externalPort }}
+    targetPort: {{ .Values.service.internalPort }}
+    name: {{ .Values.service.portName }}
+  {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
+  type: {{ .Values.service.type }}