diff --git a/kubernetes/common/common/templates/_repository.tpl b/kubernetes/common/common/templates/_repository.tpl
index 364ba7d..272db42 100644
--- a/kubernetes/common/common/templates/_repository.tpl
+++ b/kubernetes/common/common/templates/_repository.tpl
@@ -41,6 +41,7 @@
 */}}
 {{- define "common.repository.secret" -}}
   {{- $repo := include "common.repository" . }}
+  {{- $repo := default "nexus3.onap.org:10001" $repo }}
   {{- $cred := .Values.global.repositoryCred }}
   {{- $mail := default "@" $cred.mail }}
   {{- $auth := printf "%s:%s" $cred.user $cred.password | b64enc }}
diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties
index 4015e94..9d1febe 100755
--- a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties
+++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/MsgRtrApi.properties
@@ -1,17 +1,24 @@
-# Copyright © 2017 Amdocs, Bell Canada, AT&T
+###############################################################################
+#  ============LICENSE_START=======================================================
+#  org.onap.dmaap
+#  ================================================================================
+#  Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+#  ================================================================================
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#        http://www.apache.org/licenses/LICENSE-2.0
+#  
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#  ============LICENSE_END=========================================================
 #
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
+#  ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#  
+###############################################################################
 ###############################################################################
 ##
 ## Cambria API Server config
@@ -19,7 +26,7 @@
 ##	- Default values are shown as commented settings.
 ##
 
-##############################################################################
+###############################################################################
 ##
 ## HTTP service
 ##
@@ -29,7 +36,9 @@
 ##
 ##	Both Cambria and Kafka make use of Zookeeper.
 ##
+#config.zk.servers=172.18.1.1
 config.zk.servers={{.Values.zookeeper.name}}:{{.Values.zookeeper.port}}
+#config.zk.root=/fe3c/cambria/config
 
 
 ###############################################################################
@@ -39,17 +48,22 @@
 ##	Items below are passed through to Kafka's producer and consumer
 ##	configurations (after removing "kafka.")
 ##	if you want to change request.required.acks it can take this one value
+#kafka.metadata.broker.list=localhost:9092,localhost:9093
 kafka.metadata.broker.list={{.Values.kafka.name}}:{{.Values.kafka.port}}
 ##kafka.request.required.acks=-1
 #kafka.client.zookeeper=${config.zk.servers}
 consumer.timeout.ms=100
 zookeeper.connection.timeout.ms=6000
-zookeeper.session.timeout.ms=6000
+zookeeper.session.timeout.ms=20000
 zookeeper.sync.time.ms=2000
 auto.commit.interval.ms=1000
 fetch.message.max.bytes =1000000
 auto.commit.enable=false
 
+#(backoff*retries > zksessiontimeout)
+kafka.rebalance.backoff.ms=10000
+kafka.rebalance.max.retries=6
+
 
 ###############################################################################
 ##
@@ -86,7 +100,7 @@
 ##	which would substantially impact a high volume consumer's performance.
 ##
 ##	This complicates Cambria server failover, because we often need server
-##	A to close its connection before server B brings up the replacement.
+##	A to close its connection before server B brings up the replacement.    
 ##
 
 ## The consumer cache is normally enabled.
@@ -96,8 +110,8 @@
 ## consumers every sweepFreqSeconds and will clean up any connections that are
 ## dormant for touchFreqMs.
 #cambria.consumer.cache.sweepFreqSeconds=15
-#cambria.consumer.cache.touchFreqMs=120000
-
+cambria.consumer.cache.touchFreqMs=120000
+##stickforallconsumerrequests=false
 ## The cache is managed through ZK. The default value for the ZK connection
 ## string is the same as config.zk.servers.
 #cambria.consumer.cache.zkConnect=${config.zk.servers}
@@ -110,6 +124,9 @@
 ##
 #cambria.api.node.identifier=<use-something-unique-to-this-instance>
 
+#cambria.rateLimit.maxEmptyPollsPerMinute=30
+#cambria.rateLimitActual.delay.ms=10
+
 ###############################################################################
 ##
 ## Metrics Reporting
@@ -117,7 +134,7 @@
 ##	This server can report its metrics periodically on a topic.
 ##
 #metrics.send.cambria.enabled=true
-#metrics.send.cambria.topic=cambria.apinode.metrics                                  #msgrtr.apinode.metrics.dmaap
+#metrics.send.cambria.topic=cambria.apinode.metrics                                  #msgrtr.apinode.metrics.dmaap 
 #metrics.send.cambria.sendEverySeconds=60
 
 cambria.consumer.cache.zkBasePath=/fe3c/cambria/consumerCache
@@ -129,18 +146,23 @@
 
 ##############################################################################
 #AAF Properties
-msgRtr.namespace.aaf=org.openecomp.dcae.dmaap.mtnje2.mr.topic
-msgRtr.topicfactory.aaf=org.openecomp.dcae.dmaap.topicFactory|:org.openecomp.dcae.dmaap.mtnje2.mr.topic:
-enforced.topic.name.AAF=org.openecomp
+msgRtr.namespace.aaf=org.onap.dmaap.mr.topic
+msgRtr.topicfactory.aaf=org.onap.dmaap.mr.topicFactory|:org.onap.dmaap.mr.topic:
+enforced.topic.name.AAF=org.onap
 forceAAF=false
 transidUEBtopicreqd=false
-defaultNSforUEB=org.openecomp.dmaap.mr.ueb
+defaultNSforUEB=org.onap.dmaap.mr
 ##############################################################################
 #Mirror Maker Agent
-msgRtr.mirrormakeradmin.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|admin
-msgRtr.mirrormakeruser.aaf=org.openecomp.dmaap.mr.dev.mirrormaker|*|user
-msgRtr.mirrormakeruser.aaf.create=org.openecomp.dmaap.mr.dev.topicFactory|:org.openecomp.dmaap.mr.dev.topic:
+msgRtr.mirrormakeradmin.aaf=com.onap.dmaap.mr.dev.mirrormaker|*|admin
+msgRtr.mirrormakeruser.aaf=com.onap.dmaap.mr.dev.mirrormaker|*|user
+msgRtr.mirrormakeruser.aaf.create=com.onap.dmaap.mr.dev.topicFactory|:com.onap.dmaap.mr.dev.topic:
 msgRtr.mirrormaker.timeout=15000
-msgRtr.mirrormaker.topic=org.openecomp.dmaap.mr.prod.mm.agent
+msgRtr.mirrormaker.topic=com.onap.dmaap.mr.prod.mm.agent
 msgRtr.mirrormaker.consumergroup=mmagentserver
 msgRtr.mirrormaker.consumerid=1
+
+kafka.max.poll.interval.ms=300000
+kafka.heartbeat.interval.ms=60000
+kafka.session.timeout.ms=240000
+kafka.max.poll.records=1000
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties
index 9079794..a79bb8d 100755
--- a/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties
+++ b/kubernetes/dmaap/charts/message-router/resources/config/dmaap/cadi.properties
@@ -1,35 +1,20 @@
-# Copyright © 2017 Amdocs, Bell Canada, AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+aaf_locate_url=https://aaf-onap-test.osaaf.org:8095
+aaf_url=https://AAF_LOCATE_URL/AAF_NS.service:2.1
+aaf_env=DEV
+aaf_lur=org.onap.aaf.cadi.aaf.v2_0.AAFLurPerm
 
-basic_realm=openecomp.org
-basic_warn=TRUE
+cadi_truststore=/appl/dmaapMR1/etc/truststoreONAPall.jks
+cadi_truststore_password=changeit
 
-cadi_loglevel=DEBUG
-#cadi_keyfile=target/swm/package/nix/dist_files/appl/${artifactId}/etc/keyfile2
-cadi_keyfile=/appl/dmaapMR1/etc/keyfile
-# Configure AAF
-aaf_url=https://DME2RESOLVE/service=org.openecomp.authz.AuthorizationService/version=2.0/envContext=DEV/routeOffer=BAU_SE
+cadi_keyfile=/appl/dmaapMR1/etc/keyfilenew
 
-aaf_id=dgl@openecomp.org
-aaf_password=enc:f2u5br1mh29M02-
-aaf_timeout=5000
-aaf_clean_interval=1200000
-aaf_user_expires=60000
-aaf_high_count=1000000
+cadi_alias=dmaapmr@mr.dmaap.onap.org
+cadi_keystore=/appl/dmaapMR1/etc/org.onap.dmaap.mr.p12
+cadi_keystore_password=Messaging for All
+cadi_x509_issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US
 
 
-# The following properties are being set by the AJSC Container and should NOT need to be set here.
-AFT_LATITUDE=33.823589
-AFT_LONGITUDE=-84.366982
-AFT_ENVIRONMENT=AFTUAT
+cadi_loglevel=INFO
+cadi_protocols=TLSv1.1,TLSv1.2
+cadi_latitude=37.78187
+cadi_longitude=-122.26147
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/message-router/templates/deployment.yaml b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml
index 1798092..4e12ded 100644
--- a/kubernetes/dmaap/charts/message-router/templates/deployment.yaml
+++ b/kubernetes/dmaap/charts/message-router/templates/deployment.yaml
@@ -66,6 +66,9 @@
               port: {{ .Values.service.externalPort }}
             initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
             periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          - name: enableCadi
+            value: "false"
           volumeMounts:
           - mountPath: /etc/localtime
             name: localtime
diff --git a/kubernetes/dmaap/charts/message-router/values.yaml b/kubernetes/dmaap/charts/message-router/values.yaml
index aef8862..9ba3488 100644
--- a/kubernetes/dmaap/charts/message-router/values.yaml
+++ b/kubernetes/dmaap/charts/message-router/values.yaml
@@ -53,14 +53,14 @@
 
 # probe configuration parameters
 liveness:
-  initialDelaySeconds: 10
+  initialDelaySeconds: 120
   periodSeconds: 10
   # necessary to disable liveness probe when setting breakpoints
   # in debugger so K8s doesn't restart unresponsive container
   enabled: true
 
 readiness:
-  initialDelaySeconds: 10
+  initialDelaySeconds: 120
   periodSeconds: 10
 
 service:
diff --git a/kubernetes/helm/plugins/deploy/deploy.sh b/kubernetes/helm/plugins/deploy/deploy.sh
index 07455d7..9d9d1d2 100755
--- a/kubernetes/helm/plugins/deploy/deploy.sh
+++ b/kubernetes/helm/plugins/deploy/deploy.sh
@@ -38,6 +38,7 @@
       --set stringArray          set values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2)
       --set-string stringArray   set STRING values on the command line (can specify multiple or separate values with commas: key1=val1,key2=val2)
   -f, --values valueFiles        specify values in a YAML file or a URL(can specify multiple) (default [])
+      --verbose                  enables full helm install/upgrade output during deploy
 EOF
 }
 
@@ -66,18 +67,45 @@
     if [[ $START == "global:" ]]; then
       echo "global:" > $GLOBAL_OVERRIDES
       cat $COMPUTED_OVERRIDES | sed '/common:/,/consul:/d' \
-        | sed -n '/'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES  
+        | sed -n '/'"$START"'/,/'log:'/p' | sed '1d;$d' >> $GLOBAL_OVERRIDES
     else
       SUBCHART_DIR="$CACHE_SUBCHART_DIR/$(cut -d':' -f1 <<<"$START")"
       if [[ -d "$SUBCHART_DIR" ]]; then
-        cat $COMPUTED_OVERRIDES | sed -n '/'"$START"'/,/'"$END"'/p' \
+        cat $COMPUTED_OVERRIDES | sed -n '/^'"$START"'/,/^'"$END"'/p' \
           | sed '1d;$d' | cut -c3- > $SUBCHART_DIR/subchart-overrides.yaml
       fi
     fi
   done
 }
 
+resolve_deploy_flags() {
+  DEPLOY_FLAGS=$1
+  for flag in -f --values --set --set-string
+  do
+    while true ; do
+      # extract value of flag
+      length=${#flag}
+      length=$((length+1))
+      FLAG_VALUE="$(echo $DEPLOY_FLAGS | sed -n 's/.*\('$flag'\).\s*/\1/p' | cut -c$length- | cut -d' ' -f1)"
+
+      # purge flag and value from
+      DEPLOY_FLAGS="${DEPLOY_FLAGS//$flag $FLAG_VALUE/}"
+      DEPLOY_FLAGS=$(echo $DEPLOY_FLAGS | awk '{$1=$1};1')
+      if [ -z "$FLAG_VALUE" ] ; then
+        break
+      fi
+    done
+  done
+  echo "$DEPLOY_FLAGS"
+}
+
 deploy() {
+  # validate params
+  if [[ -z "$1" || -z "$2" ]]; then
+    usage
+    exit 0
+  fi
+
   RELEASE=$1
   CHART_URL=$2
   FLAGS=${@:3}
@@ -86,23 +114,54 @@
   CACHE_DIR=~/.helm/plugins/deploy/cache
   CHART_DIR=$CACHE_DIR/$CHART_NAME
   CACHE_SUBCHART_DIR=$CHART_DIR-subcharts
+  LOG_DIR=$CHART_DIR/logs
+
+  # determine if verbose output is enabled
+  VERBOSE="false"
+  if [[ $FLAGS = *"--verbose"* ]]; then
+    FLAGS="$(echo $FLAGS| sed -n 's/--verbose//p')"
+    VERBOSE="true"
+  fi
+  if [[ $FLAGS = *"--dry-run"* ]]; then
+    VERBOSE="true"
+    FLAGS="$FLAGS --debug"
+  fi
+
   # should pass all flags instead
-  NAMESPACE="$(echo $FLAGS | sed -n 's/.*\(namespace\).\s*/\1/p' | cut -c10-)"
- 
+  NAMESPACE="$(echo $FLAGS | sed -n 's/.*\(namespace\).\s*/\1/p' | cut -c10- | cut -d' ' -f1)"
+
+  # Remove all override values passed in as arguments. These will be used during dry run
+  # to resolve computed override values. Remaining flags will be passed on during
+  # actual upgrade/install of parent and subcharts.
+  DEPLOY_FLAGS=$(resolve_deploy_flags "$FLAGS")
+
+  # determine if upgrading individual subchart or entire parent + subcharts
+  SUBCHART_RELEASE="$(cut -d'-' -f2 <<<"$RELEASE")"
+  if [[ ! -d "$CACHE_SUBCHART_DIR/$SUBCHART_RELEASE" ]]; then
+    SUBCHART_RELEASE=
+  else
+    # update specified subchart without parent
+    RELEASE="$(cut -d'-' -f1 <<<"$RELEASE")"
+  fi
+
   # clear previously cached charts
   rm -rf $CACHE_DIR
 
+  # create log driectory
+  mkdir -p $LOG_DIR
+
   # fetch umbrella chart (parent chart containing subcharts)
   if [[ -d "$CHART_URL" ]]; then
     mkdir -p $CHART_DIR
     cp -R $CHART_URL/* $CHART_DIR/
 
-    cd $CHART_DIR/charts/
-    for subchart in * ; do
-      tar xzf ${subchart}
+    charts=$CHART_DIR/charts/*
+    for subchart in $charts ; do
+      tar xzf ${subchart} -C $CHART_DIR/charts/
     done
-    rm -rf *.tgz
+    rm -rf $CHART_DIR/charts/*.tgz
   else
+    echo "fetching $CHART_URL"
     helm fetch $CHART_URL --untar --untardir $CACHE_DIR
   fi
 
@@ -126,29 +185,57 @@
   generate_overrides $COMPUTED_OVERRIDES $GLOBAL_OVERRIDES
 
   # upgrade/install parent chart first
-  helm upgrade -i $RELEASE $CHART_DIR --namespace $NAMESPACE -f $COMPUTED_OVERRIDES
+  if [[ -z "$SUBCHART_RELEASE" ]]; then
+    LOG_FILE=$LOG_DIR/${RELEASE}.log
+    :> $LOG_FILE
+
+    helm upgrade -i $RELEASE $CHART_DIR $DEPLOY_FLAGS -f $COMPUTED_OVERRIDES \
+     > $LOG_FILE.log 2>&1
+
+    if [[ $VERBOSE == "true" ]]; then
+      cat $LOG_FILE
+    else
+      echo "release $RELEASE deployed"
+    fi
+  fi
 
   # parse computed overrides - will use to determine if a subchart is "enabled"
   eval $(parse_yaml $COMPUTED_OVERRIDES "computed_")
 
   # upgrade/install each "enabled" subchart
-  cd $CACHE_SUBCHART_DIR
+  cd $CACHE_SUBCHART_DIR/
   for subchart in * ; do
     VAR="computed_${subchart}_enabled"
     COMMAND="$"$VAR
     eval "SUBCHART_ENABLED=$COMMAND"
     if [[ $SUBCHART_ENABLED == "true" ]]; then
-      SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml
-      helm upgrade -i "${RELEASE}-${subchart}" $CACHE_SUBCHART_DIR/$subchart \
-       --namespace $NAMESPACE -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES
+      if [[ -z "$SUBCHART_RELEASE" || $SUBCHART_RELEASE == "$subchart" ]]; then
+        LOG_FILE=$LOG_DIR/"${RELEASE}-${subchart}".log
+        :> $LOG_FILE
+
+        SUBCHART_OVERRIDES=$CACHE_SUBCHART_DIR/$subchart/subchart-overrides.yaml
+        helm upgrade -i "${RELEASE}-${subchart}" $CACHE_SUBCHART_DIR/$subchart \
+         $DEPLOY_FLAGS -f $GLOBAL_OVERRIDES -f $SUBCHART_OVERRIDES \
+         > $LOG_FILE 2>&1
+
+        if [[ $VERBOSE == "true" ]]; then
+          cat $LOG_FILE
+        else
+          echo "release ${RELEASE}-${subchart} deployed"
+        fi
+      fi
+    else
+      array=($(helm ls -q | grep "${RELEASE}-${subchart}"))
+      n=${#array[*]}
+      for (( i = n-1; i >= 0; i-- )); do
+        helm del "${array[i]}" --purge
+      done
     fi
   done
-}
 
-if [[ $# < 2 ]]; then
-  usage
-  exit 0
-fi
+  # report on success/failures of installs/upgrades
+  helm ls | grep FAILED | grep $RELEASE
+}
 
 case "${1:-"help"}" in
   "help")
diff --git a/kubernetes/helm/plugins/undeploy/undeploy.sh b/kubernetes/helm/plugins/undeploy/undeploy.sh
index 02b5d34..8191174 100755
--- a/kubernetes/helm/plugins/undeploy/undeploy.sh
+++ b/kubernetes/helm/plugins/undeploy/undeploy.sh
@@ -21,7 +21,7 @@
   RELEASE=$1
   FLAGS=$2
 
-  array=($(helm ls -q | grep $RELEASE))
+  array=($(helm ls -q --all | grep $RELEASE))
   n=${#array[*]}
   for (( i = n-1; i >= 0; i-- ))
   do
diff --git a/kubernetes/onap/values.yaml b/kubernetes/onap/values.yaml
index 545a7bd..190a9ec 100644
--- a/kubernetes/onap/values.yaml
+++ b/kubernetes/onap/values.yaml
@@ -47,15 +47,11 @@
   persistence:
     mountPath: /dockerdata-nfs
 
-  # flag to enable debugging - application support required
-  debugEnabled: false
-
   # override default resource limit flavor for all charts
   flavor: unlimited
 
-# Repository for creation of nexus3.onap.org secret
-repository: nexus3.onap.org:10001
-
+  # flag to enable debugging - application support required
+  debugEnabled: false
 
 #################################################################
 # Enable/disable and configure helm charts (ie. applications)