diff --git a/kubernetes/clamp/.helmignore b/kubernetes/clamp/.helmignore
deleted file mode 100644
index 68ffb32..0000000
--- a/kubernetes/clamp/.helmignore
+++ /dev/null
@@ -1 +0,0 @@
-components/
diff --git a/kubernetes/clamp/Chart.yaml b/kubernetes/clamp/Chart.yaml
deleted file mode 100644
index e9f2197..0000000
--- a/kubernetes/clamp/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Clamp
-name: clamp
-version: 7.0.0
diff --git a/kubernetes/clamp/Makefile b/kubernetes/clamp/Makefile
deleted file mode 100644
index 89b2f46..0000000
--- a/kubernetes/clamp/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-OUTPUT_DIR := $(ROOT_DIR)/../dist
-PACKAGE_DIR := $(OUTPUT_DIR)/packages
-SECRET_DIR := $(OUTPUT_DIR)/secrets
-
-EXCLUDES := dist resources templates charts docker
-HELM_BIN := helm
-HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
-HELM_VER := $(shell $(HELM_BIN) version --template "{{.Version}}")
-
-.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-
-all: $(HELM_CHARTS)
-
-$(HELM_CHARTS):
-	@echo "\n[$@]"
-	@make package-$@
-
-make-%:
-	@if [ -f $*/Makefile ]; then make -C $*; fi
-
-dep-%: make-%
-	@if [ -f $*/requirements.yaml ]; then $(HELM_BIN) dep up $*; fi
-
-lint-%: dep-%
-	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) lint $*; fi
-
-package-%: lint-%
-	@mkdir -p $(PACKAGE_DIR)
-ifeq "$(findstring v3,$(HELM_VER))" "v3"
-	@if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$($(HELM_BIN) package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && $(HELM_BIN) push -f $$PACKAGE_NAME local; fi
-else
-	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) package -d $(PACKAGE_DIR) $*; fi
-endif
-	@$(HELM_BIN) repo index $(PACKAGE_DIR)
-
-clean:
-	@rm -f */requirements.lock
-	@rm -f *tgz */charts/*tgz
-	@rm -rf $(PACKAGE_DIR)
-%:
-	@:
diff --git a/kubernetes/clamp/components/Makefile b/kubernetes/clamp/components/Makefile
deleted file mode 100644
index bf267b7..0000000
--- a/kubernetes/clamp/components/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-OUTPUT_DIR := $(ROOT_DIR)/../../dist
-PACKAGE_DIR := $(OUTPUT_DIR)/packages
-SECRET_DIR := $(OUTPUT_DIR)/secrets
-
-EXCLUDES :=
-HELM_BIN := helm
-HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
-
-.PHONY: $(EXCLUDES) $(HELM_CHARTS)
-
-all: $(HELM_CHARTS)
-
-$(HELM_CHARTS):
-	@echo "\n[$@]"
-	@make package-$@
-
-make-%:
-	@if [ -f $*/Makefile ]; then make -C $*; fi
-
-dep-%: make-%
-	@if [ -f $*/requirements.yaml ]; then $(HELM_BIN) dep up $*; fi
-
-lint-%: dep-%
-	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) lint $*; fi
-
-package-%: lint-%
-	@mkdir -p $(PACKAGE_DIR)
-	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) package -d $(PACKAGE_DIR) $*; fi
-	@$(HELM_BIN) repo index $(PACKAGE_DIR)
-
-clean:
-	@rm -f */requirements.lock
-	@rm -f *tgz */charts/*tgz
-	@rm -rf $(PACKAGE_DIR)
-%:
-	@:
diff --git a/kubernetes/clamp/components/clamp-backend/Chart.yaml b/kubernetes/clamp/components/clamp-backend/Chart.yaml
deleted file mode 100644
index c9aa635..0000000
--- a/kubernetes/clamp/components/clamp-backend/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Clamp
-name: clamp-backend
-version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-dash-es/Chart.yaml b/kubernetes/clamp/components/clamp-dash-es/Chart.yaml
deleted file mode 100644
index c2b8ccb..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Clamp Dashboard Elasticsearch
-name: clamp-dash-es
-version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-dash-es/requirements.yaml b/kubernetes/clamp/components/clamp-dash-es/requirements.yaml
deleted file mode 100644
index 22b92c4..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/requirements.yaml
+++ /dev/null
@@ -1,25 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: common
-    version: ~7.x-0
-    repository: '@local'
-  - name: certInitializer
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml b/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml
deleted file mode 100644
index 9e04d5a..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/resources/config/elasticsearch.yml
+++ /dev/null
@@ -1,138 +0,0 @@
----
-# Copyright © 2020  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ======================== Elasticsearch Configuration =========================
-#
-# NOTE: Elasticsearch comes with reasonable defaults for most settings.
-#       Before you set out to tweak and tune the configuration, make sure you
-#       understand what are you trying to accomplish and the consequences.
-#
-# The primary way of configuring a node is via this file. This template lists
-# the most important settings you may want to configure for a production cluster.
-#
-# Please consult the documentation for further information on configuration options:
-# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
-#
-# ---------------------------------- Cluster -----------------------------------
-#
-# Name of the Elasticsearch cluster.
-# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
-# The default name is elasticsearch, but you should change it to an appropriate name which describes the
-# purpose of the cluster.
-#
-## Default Elasticsearch configuration from elasticsearch-docker.
-## from https://opendistro.github.io/for-elasticsearch-docs/docs/elasticsearch/configuration/
-#
-
-cluster.name: "clamp-dashboard"
-node.name: "cldash-es-node1"
-# ---------------------------------- Network -----------------------------------
-#
-# Set the bind address to a specific IP (IPv4 or IPv6):
-# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
-# non-loopback address.
-network.host: 0.0.0.0
-#
-# Set a custom port for HTTP: If required, default is 9200-9300
-#
-#http.port: $http.port
-#
-# For more information, consult the network module documentation.
-# ----------------------------------- Paths ------------------------------------
-#
-# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
-# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
-# may change & can deal to data loss.
-path.data: /usr/share/elasticsearch/data
-#
-# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
-# as on upgrading Elasticsearch, directory structure may change.
-path.logs: /usr/share/elasticsearch/logs
-#
-# ----------------------------------- Memory -----------------------------------
-#
-# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
-# Lock the memory on startup.
-#
-bootstrap.memory_lock: false
-#
-# Make sure that the heap size is set to about half the memory available
-# on the system and that the owner of the process is allowed to use this
-# limit.
-#
-# Elasticsearch performs poorly when the system is swapping the memory.
-#
-# --------------------------------- Discovery ----------------------------------
-#
-# Pass an initial list of hosts to perform discovery when new node is started
-# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
-# that are likely to be live and contactable.
-# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
-# to connect to other nodes running on the same server.
-# # minimum_master_nodes need to be explicitly set when bound on a public IP
-# # set to 1 to allow single node clusters
-# # Details: https://github.com/elastic/elasticsearch/pull/17288
-discovery.zen.minimum_master_nodes: 1
-discovery.seed_hosts: []
-# # Breaking change in 7.0
-# # https://www.elastic.co/guide/en/elasticsearch/reference/7.0/breaking-changes-7.0.html#breaking_70_discovery_changes
-cluster.initial_master_nodes:
-    - cldash-es-node1
-#    - docker-test-node-1
-# ---------------------------------- Various -----------------------------------
-#
-# Require explicit names when deleting indices:
-#
-#action.destructive_requires_name: true
-# Set a custom port for HTTP: If required, default is 9200-9300
-# This is used for REST APIs
-http.port: {{.Values.service.externalPort}}
-# Port to bind for communication between nodes. Accepts a single value or a range.
-# If a range is specified, the node will bind to the first available port in the range.
-# Defaults to 9300-9400.
-# More info:
-transport.tcp.port: {{.Values.service.externalPort2}}
-
-######## Start OpenDistro for Elasticsearch Security Demo Configuration ########
-# WARNING: revise all the lines below before you go into production
-{{- if .Values.global.aafEnabled }}
-opendistro_security.ssl.transport.pemcert_filepath: {{ .Values.certInitializer.clamp_pem }}
-opendistro_security.ssl.transport.pemkey_filepath: {{ .Values.certInitializer.clamp_key }}
-opendistro_security.ssl.transport.pemtrustedcas_filepath: {{ .Values.certInitializer.clamp_ca_certs_pem }}
-opendistro_security.ssl.http.pemcert_filepath: {{ .Values.certInitializer.clamp_pem }}
-opendistro_security.ssl.http.pemkey_filepath: {{ .Values.certInitializer.clamp_key }}
-opendistro_security.ssl.http.pemtrustedcas_filepath: {{ .Values.certInitializer.clamp_ca_certs_pem }}
-{{- else }}
-opendistro_security.ssl.transport.pemcert_filepath: esnode.pem
-opendistro_security.ssl.transport.pemkey_filepath: esnode-key.pem
-opendistro_security.ssl.transport.pemtrustedcas_filepath: root-ca.pem
-opendistro_security.ssl.http.pemcert_filepath: esnode.pem
-opendistro_security.ssl.http.pemkey_filepath: esnode-key.pem
-opendistro_security.ssl.http.pemtrustedcas_filepath: root-ca.pem
-{{- end }}
-opendistro_security.ssl.transport.enforce_hostname_verification: false
-opendistro_security.ssl.http.enabled: {{.Values.security.ssl.enabled}}
-
-opendistro_security.allow_unsafe_democertificates: true
-opendistro_security.allow_default_init_securityindex: true
-opendistro_security.authcz.admin_dn:
-  - CN=kirk,OU=client,O=client,L=test, C=de
-
-opendistro_security.audit.type: internal_elasticsearch
-opendistro_security.enable_snapshot_restore_privilege: true
-opendistro_security.check_snapshot_restore_write_privileges: true
-opendistro_security.restapi.roles_enabled: ["all_access", "security_rest_api_access"]
-cluster.routing.allocation.disk.threshold_enabled: false
-node.max_local_storage_nodes: 3
-######## End OpenDistro for Elasticsearch Security Demo Configuration ########
diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml
deleted file mode 100644
index d7aa77c..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/templates/deployment.yaml
+++ /dev/null
@@ -1,138 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - command:
-        - /bin/sh
-        - -c
-        - |
-          sysctl -w vm.max_map_count=262144
-          mkdir -p /usr/share/elasticsearch/logs
-          mkdir -p /usr/share/elasticsearch/data
-          chmod -R 777 /usr/share/elasticsearch
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        securityContext:
-          privileged: true
-        image: {{ include "repositoryGenerator.image.busybox" . }}
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: init-sysctl
-        volumeMounts:
-        - name: {{ include "common.fullname" . }}-logs
-          mountPath: /usr/share/elasticsearch/logs/
-        - name: {{ include "common.fullname" . }}-data
-          mountPath: /usr/share/elasticsearch/data/
-{{ include "common.certInitializer.initContainer" . | indent 6 }}
-      containers:
-        - name: {{ include "common.name" . }}
-          image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          {{- if .Values.global.aafEnabled }}
-          command:
-          - sh
-          args:
-          - -c
-          - |
-            cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_key }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_key }}
-            cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_pem }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_pem }}
-            cp {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }} /usr/share/elasticsearch/config/{{ .Values.certInitializer.clamp_ca_certs_pem }}
-            /usr/local/bin/docker-entrypoint.sh
-          {{- end }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-            name: {{ include "common.servicename" . }}
-          - containerPort: {{ .Values.service.internalPort2 }}
-            name: {{ include "common.servicename" . }}2
-# disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-            timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort2 }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-            timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
-          env:
-          volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
-            name: {{ include "common.fullname" . }}-config
-            subPath: elasticsearch.yml
-          - mountPath: /usr/share/elasticsearch/data/
-            name: {{ include "common.fullname" . }}-data
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: {{ include "common.fullname" . }}-config
-          configMap:
-            name: {{ include "common.fullname" . }}-configmap
-            items:
-            - key: elasticsearch.yml
-              path: elasticsearch.yml
-        - name: {{ include "common.fullname" . }}-data
-          persistentVolumeClaim:
-            claimName: {{ include "common.fullname" . }}
-        - name: {{ include "common.fullname" . }}-logs
-          hostPath:
-            path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPathLogs }}
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml
deleted file mode 100644
index 3669621..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/templates/pv.yaml
+++ /dev/null
@@ -1,39 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-{{- if eq "True" (include "common.needPV" .) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}-data
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-    name: {{ include "common.fullname" . }}
-spec:
-  capacity:
-    storage: {{ .Values.persistence.size}}
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  storageClassName: "{{ include "common.fullname" . }}-data"
-  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
-  hostPath:
-    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
-{{- end -}}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml
deleted file mode 100644
index 6ae4eea..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/templates/pvc.yaml
+++ /dev/null
@@ -1,38 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-{{- if .Values.persistence.annotations }}
-  annotations:
-{{ toYaml .Values.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  storageClassName: {{ include "common.storageClass" . }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.size }}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml
deleted file mode 100644
index 9c182ed..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/templates/service.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.config.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.config.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
----
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}-tcp
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type2 }}
-  ports:
-    {{if eq .Values.service.type2 "NodePort" -}}
-    - port: {{ .Values.service.externalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.config.portName2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort2 }}
-      targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.config.portName2 }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/clamp/components/clamp-dash-es/values.yaml b/kubernetes/clamp/components/clamp-dash-es/values.yaml
deleted file mode 100644
index 1e2ae47..0000000
--- a/kubernetes/clamp/components/clamp-dash-es/values.yaml
+++ /dev/null
@@ -1,163 +0,0 @@
-# Copyright © 2020 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  persistence: {}
-  centralizedLoggingEnabled: true
-  #AAF service
-  aafEnabled: true
-
-#################################################################
-# AAF part
-#################################################################
-certInitializer:
-  permission_user: 1000
-  permission_group: 999
-  addconfig: true
-  keystoreFile: "org.onap.clamp.p12"
-  truststoreFile: "org.onap.clamp.trust.jks"
-  keyFile: "org.onap.clamp.keyfile"
-  truststoreFileONAP: "truststoreONAPall.jks"
-  clamp_key: "org.onap.clamp.crt.key"
-  clamp_pem: "org.onap.clamp.key.pem"
-  clamp_ca_certs_pem: "clamp-ca-certs.pem"
-  nameOverride: clamp-es-cert-initializer
-  aafDeployFqi: deployer@people.osaaf.org
-  aafDeployPass: demo123456!
-  # aafDeployCredsExternalSecret: some secret
-  fqdn: clamp
-  fqi: clamp@clamp.onap.org
-  public_fqdn: clamp.onap.org
-  cadi_longitude: "0.0"
-  cadi_latitude: "0.0"
-  app_ns: org.osaaf.aaf
-  credsPath: /opt/app/osaaf/local
-  aaf_add_config: >
-    /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop;
-    export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0);
-    cd {{ .Values.credsPath }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }};
-    chmod a+rx *;
-
-flavor: small
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-image: onap/clamp-dashboard-elasticsearch:5.0.4
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-# Example:
-config: {}
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 180
-  periodSeconds: 30
-  timeoutSeconds: 5
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 180
-  periodSeconds: 30
-  timeoutSeconds: 5
-
-## Persist data to a persitent volume
-persistence:
-  enabled: true
-
-  ## A manually managed Persistent Volume and Claim
-  ## Requires persistence.enabled: true
-  ## If defined, PVC must be created manually before volume will be bound
-  # existingClaim:
-  volumeReclaimPolicy: Retain
-
-  ## database data Persistent Volume Storage Class
-  ## If defined, storageClassName: <storageClass>
-  ## If set to "-", storageClassName: "", which disables dynamic provisioning
-  ## If undefined (the default) or set to null, no storageClassName spec is
-  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-  ##   GKE, AWS & OpenStack)
-  accessMode: ReadWriteOnce
-  size: 4Gi
-  mountPath: /dockerdata-nfs
-  mountSubPath: clamp/dashboard-elasticsearch/data
-  mountSubPathLogs: clamp
-
-security:
-  ssl:
-    enabled: true
-
-service:
-  type: ClusterIP
-  name: cdash-es
-  portName: cdash-es-rest
-  externalPort: 9200
-  internalPort: 9200
-  type2: ClusterIP
-  portName2: cdash-es-tcp
-  externalPort2: 9300
-  internalPort2: 9300
-
-ingress:
-  enabled: false
-
-#resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 2.5Gi
-  large:
-    limits:
-      cpu: 1
-      memory: 4Gi
-    requests:
-      cpu: 10m
-      memory: 2.5Gi
-  unlimited: {}
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml b/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml
deleted file mode 100644
index f5c146a..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Clamp Dashboard Kibana
-name: clamp-dash-kibana
-version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml b/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml
deleted file mode 100644
index 22b92c4..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/requirements.yaml
+++ /dev/null
@@ -1,25 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: common
-    version: ~7.x-0
-    repository: '@local'
-  - name: certInitializer
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml b/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml
deleted file mode 100644
index b7a8fbf..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/resources/config/kibana.yml
+++ /dev/null
@@ -1,41 +0,0 @@
-{{/*
-# Copyright © 2020  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.# Default Kibana configuration from kibana-docker.
-*/}}
-
-server.name: "Clamp CL Dashboard"
-server.host: "0"
-# Kibana is served by a back end server. This setting specifies the port to use.
-server.port: {{.Values.service.externalPort}}
-
-server.ssl.enabled: {{.Values.config.sslEnabled}}
-{{- if .Values.global.aafEnabled }}
-server.ssl.certificate: {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_pem }}
-server.ssl.key: {{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_key }}
-{{ else }}
-server.ssl.certificate: {{.Values.config.sslPemCertFilePath}}
-server.ssl.key: {{.Values.config.sslPemkeyFilePath}}
-{{- end }}
-# The URL of the Elasticsearch instance to use for all your queries.
-elasticsearch.hosts: ${elasticsearch_base_url}
-
-elasticsearch.ssl.verificationMode: none
-elasticsearch.username: {{.Values.config.elasticUSR}}
-elasticsearch.password: {{.Values.config.elasticPWD}}
-
-elasticsearch.requestHeadersWhitelist: ["securitytenant","Authorization"]
-
-opendistro_security.multitenancy.enabled: true
-opendistro_security.multitenancy.tenants.preferred: ["Private", "Global"]
-opendistro_security.readonly_mode.roles: ["kibana_read_only"]
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml
deleted file mode 100644
index 48d8547..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/templates/configmap.yaml
+++ /dev/null
@@ -1,38 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: Secret
-metadata:
-  name: {{ include "common.fullname" . }}-aaf-pem-keys
-  namespace: {{ include "common.namespace" . }}
-type: Opaque
-data:
-{{ tpl (.Files.Glob "resources/certs/*").AsSecrets . | indent 2 }}
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml
deleted file mode 100644
index 8cb95cd..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/templates/deployment.yaml
+++ /dev/null
@@ -1,107 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - clamp-dash-es
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: {{ include "repositoryGenerator.image.readiness" . }}
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-readiness
-{{ include "common.certInitializer.initContainer" . | indent 6 }}
-      containers:
-        - name: {{ include "common.name" . }}
-          image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-            name: {{ include "common.servicename" . }}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-# disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          env:
-          - name: elasticsearch_base_url
-            value: "{{ternary "https" "http" .Values.security.ssl.enabled}}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}"
-          volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /usr/share/kibana/config/kibana.yml
-            name: {{ include "common.fullname" . }}
-            subPath: kibana.yml
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: {{ include "common.fullname" . }}
-          configMap:
-            name: {{ include "common.fullname" . }}
-            items:
-            - key: kibana.yml
-              path: kibana.yml
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml
deleted file mode 100644
index f1b6cf5..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/templates/service.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.config.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.config.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/values.yaml b/kubernetes/clamp/components/clamp-dash-kibana/values.yaml
deleted file mode 100644
index 9b5f1fc..0000000
--- a/kubernetes/clamp/components/clamp-dash-kibana/values.yaml
+++ /dev/null
@@ -1,152 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  persistence: {}
-  centralizedLoggingEnabled: true
-  #AAF service
-  aafEnabled: true
-
-#################################################################
-# AAF part
-#################################################################
-certInitializer:
-  permission_user: 1000
-  permission_group: 999
-  addconfig: true
-  keystoreFile: "org.onap.clamp.p12"
-  truststoreFile: "org.onap.clamp.trust.jks"
-  keyFile: "org.onap.clamp.keyfile"
-  truststoreFileONAP: "truststoreONAPall.jks"
-  clamp_key: "org.onap.clamp.crt.key"
-  clamp_pem: "org.onap.clamp.key.pem"
-  clamp_ca_certs_pem: "clamp-ca-certs.pem"
-  nameOverride: clamp-kibana-cert-initializer
-  aafDeployFqi: deployer@people.osaaf.org
-  aafDeployPass: demo123456!
-  # aafDeployCredsExternalSecret: some secret
-  fqdn: clamp
-  fqi: clamp@clamp.onap.org
-  public_fqdn: clamp.onap.org
-  cadi_longitude: "0.0"
-  cadi_latitude: "0.0"
-  app_ns: org.osaaf.aaf
-  credsPath: /opt/app/osaaf/local
-  aaf_add_config: >
-    /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop;
-    export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0);
-    cd {{ .Values.credsPath }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }};
-    chmod a+rx *;
-
-flavor: small
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-image: onap/clamp-dashboard-kibana:5.0.4
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-#the 'sslEnabled flag' here below is for the kibana UI connection (web browser connection to kibana)
-config:
-  elasticsearchServiceName: cdash-es
-  elasticsearchPort: 9200
-  elasticUSR: kibanaserver
-  elasticPWD: kibanaserver
-  sslEnabled: true
-  sslPemCertFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.crt.pem
-  sslPemkeyFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.key.pem
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 360
-  periodSeconds: 30
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 360
-  periodSeconds: 30
-
-#internal ssl security scheme for elasticsearch connection mainly
-security:
-  ssl:
-    enabled: true
-
-service:
-  #Example service definition with external, internal and node ports.
-  #Services may use any combination of ports depending on the 'type' of
-  #service being defined.
-  type: NodePort
-  name: cdash-kibana
-  portName: cdash-kibana-http
-  externalPort: 5601
-  internalPort: 5601
-  nodePort: 90
-ingress:
-  enabled: false
-  service:
-    - baseaddr: "cdash-kibana"
-      name: "cdash-kibana"
-      port: 5601
-  config:
-    ssl: "redirect"
-
-#resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 2Gi
-    requests:
-      cpu: 10m
-      memory: 750Mi
-  large:
-    limits:
-      cpu: 1
-      memory: 2Gi
-    requests:
-      cpu: 10m
-      memory: 750Mi
-  unlimited: {}
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml b/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml
deleted file mode 100644
index 686898e..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/Chart.yaml
+++ /dev/null
@@ -1,19 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Clamp Dashboard Logstash
-name: clamp-dash-logstash
-version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml b/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml
deleted file mode 100644
index 22b92c4..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/requirements.yaml
+++ /dev/null
@@ -1,25 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: common
-    version: ~7.x-0
-    repository: '@local'
-  - name: certInitializer
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml
deleted file mode 100644
index 1e06e34..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/logstash.yml
+++ /dev/null
@@ -1,26 +0,0 @@
-{{/*
-# Copyright © 2020  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-http.host: "0.0.0.0"
-## Path where pipeline configurations reside
-path.config: /usr/share/logstash/pipeline
-
-## Type of queue : memeory based or file based
-#queue.type: persisted
-## Size of queue
-#queue.max_bytes: 1024mb
-## Setting true makes logstash check periodically for change in pipeline configurations
-config.reload.automatic: true
-
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf b/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf
deleted file mode 100644
index b978e76..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/resources/config/pipeline.conf
+++ /dev/null
@@ -1,277 +0,0 @@
-{{/*
-# Copyright (c) 2018 AT&T Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-input {
-    http_poller {
-        urls => {
-            event_queue => {
-                method => get
-                url => "${dmaap_base_url}/events/${event_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
-                headers => {
-                    Accept => "application/json"
-                }
-                topic => "${event_topic}"
-                tags => [ "dmaap_source" ]
-            }
-            notification_queue => {
-                method => get
-                url => "${dmaap_base_url}/events/${notification_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
-                headers => {
-                    Accept => "application/json"
-                }
-                topic => "${notification_topic}"
-                tags => [ "dmaap_source" ]
-            }
-            request_queue => {
-                method => get
-                url => "${dmaap_base_url}/events/${request_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
-                headers => {
-                    Accept => "application/json"
-                }
-                topic => "${request_topic}"
-                tags => [ "dmaap_source" ]
-            }
-        }
-        socket_timeout => 30
-        request_timeout => 30
-        schedule => { "every" => "1m" }
-        codec => "plain"
-{{- if .Values.global.aafEnabled }}
-        cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}"
-{{- else }}
-        cacert => "/certs.d/aafca.pem"
-{{- end }}
-    }
-}
-
-
-filter {
-    # avoid noise if no entry in the list
-    if [message] == "[]" {
-        drop { }
-    }
-
-    if [http_request_failure] or [@metadata][code] != 200 {
-       mutate {
-              add_tag => [ "error" ]
-       }
-    }
-
-    if "dmaap_source" in [@metadata][request][tags] {
-        #
-        # Dmaap provides a json list, whose items are Strings containing the event
-        # provided to Dmaap, which itself is an escaped json.
-        #
-        # We first need to parse the json as we have to use the plaintext as it cannot
-        # work with list of events, then split that list into multiple string events,
-        # that we then transform into json.
-        #
-        json {
-            source => "[message]"
-            target => "message"
-        }
-
-        split {
-            field => "message"
-        }
-        json {
-            source => "message"
-        }
-        mutate {
-            remove_field => [ "message" ]
-        }
-    }
-
-    #
-    # Some timestamps are expressed as milliseconds, some are in microseconds
-    #
-    if [closedLoopAlarmStart] {
-        ruby {
-            code => "
-            if event.get('closedLoopAlarmStart').to_s.to_i(10) > 9999999999999
-              event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10) / 1000)
-            else
-              event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10))
-            end
-            "
-        }
-        date {
-            match => [ "closedLoopAlarmStart", UNIX_MS ]
-            target => "closedLoopAlarmStart"
-        }
-    }
-
-    if [closedLoopAlarmEnd] {
-        ruby {
-            code => "
-            if event.get('closedLoopAlarmEnd').to_s.to_i(10) > 9999999999999
-              event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10) / 1000)
-            else
-              event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10))
-            end
-            "
-        }
-        date {
-            match => [ "closedLoopAlarmEnd", UNIX_MS ]
-            target => "closedLoopAlarmEnd"
-        }
-
-    }
-
-
-    #
-    # Notification time are expressed under the form "yyyy-MM-dd HH:mm:ss", which
-    # is close to ISO8601, but lacks of T as spacer: "yyyy-MM-ddTHH:mm:ss"
-    #
-    if [notificationTime] {
-        mutate {
-            gsub => [
-                "notificationTime", " ", "T"
-                ]
-        }
-        date {
-            match => [ "notificationTime", ISO8601 ]
-            target => "notificationTime"
-        }
-    }
-
-
-    #
-    # Renaming some fields for readability
-    #
-        if [AAI][generic-vnf.vnf-name] {
-            mutate {
-                add_field => { "vnfName" => "%{[AAI][generic-vnf.vnf-name]}" }
-            }
-        }
-        if [AAI][generic-vnf.vnf-type] {
-            mutate {
-                add_field => { "vnfType" => "%{[AAI][generic-vnf.vnf-type]}" }
-            }
-        }
-        if [AAI][vserver.vserver-name] {
-            mutate {
-                add_field => { "vmName" => "%{[AAI][vserver.vserver-name]}" }
-            }
-        }
-        if [AAI][complex.city] {
-            mutate {
-                add_field => { "locationCity" => "%{[AAI][complex.city]}" }
-            }
-        }
-        if [AAI][complex.state] {
-            mutate {
-                add_field => { "locationState" => "%{[AAI][complex.state]}" }
-            }
-        }
-
-
-    #
-    # Adding some flags to ease aggregation
-    #
-    if [closedLoopEventStatus] =~ /(?i)ABATED/ {
-        mutate {
-            add_field => { "flagAbated" => "1" }
-        }
-    }
-    if [notification] =~ /^.*?(?:\b|_)FINAL(?:\b|_).*?(?:\b|_)FAILURE(?:\b|_).*?$/ {
-        mutate {
-            add_field => { "flagFinalFailure" => "1" }
-        }
-    }
-
-
-    if "error" not in [@metadata][request][tags]{
-        #
-        # Creating data for a secondary index
-        #
-        clone {
-            clones => [ "event-cl-aggs" ]
-            add_tag => [ "event-cl-aggs" ]
-        }
-
-        if  "event-cl-aggs" in [@metadata][request][tags]{
-            #
-            # we only need a few fields for aggregations; remove all fields from clone except :
-            #   vmName,vnfName,vnfType,requestID,closedLoopAlarmStart, closedLoopControlName,closedLoopAlarmEnd,abated,nbrDmaapevents,finalFailure
-            #
-            prune {
-                whitelist_names => ["^@.*$","^topic$","^type$","^tags$","^flagFinalFailure$","^flagAbated$","^locationState$","^locationCity$","^vmName$","^vnfName$","^vnfType$","^requestID$","^closedLoopAlarmStart$","^closedLoopControlName$","^closedLoopAlarmEnd$","^target$","^target_type$","^triggerSourceName$","^policyScope$","^policyName$","^policyVersion$"]
-            }
-
-        }
-    }
-}
-
-
-output {
-    stdout {
-        codec => rubydebug
-    }
-
-    if "error" in [tags] {
-        elasticsearch {
-            ilm_enabled => false
-            codec => "json"
-{{- if .Values.global.aafEnabled }}
-            cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}"
-{{- else }}
-            cacert => "/clamp-cert/ca-certs.pem"
-{{- end }}
-            ssl_certificate_verification => false
-            hosts => ["${elasticsearch_base_url}"]
-            user => ["${logstash_user}"]
-            password => ["${logstash_pwd}"]
-            index => "errors-%{+YYYY.MM.DD}"
-            doc_as_upsert => true
-        }
-
-    } else if "event-cl-aggs" in [tags] {
-        elasticsearch {
-            ilm_enabled => false
-            codec => "json"
-            hosts => ["${elasticsearch_base_url}"]
-{{- if .Values.global.aafEnabled }}
-            cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}"
-{{- else }}
-            cacert => "/clamp-cert/ca-certs.pem"
-{{- end }}
-            ssl_certificate_verification => false
-            user => ["${logstash_user}"]
-            password => ["${logstash_pwd}"]
-            document_id => "%{requestID}"
-            index => "events-cl-%{+YYYY.MM.DD}" # creates daily indexes for control loop
-            doc_as_upsert => true
-            action => "update"
-        }
-
-    } else {
-        elasticsearch {
-            ilm_enabled => false
-            codec => "json"
-            hosts => ["${elasticsearch_base_url}"]
-{{- if .Values.global.aafEnabled }}
-            cacert => "{{ .Values.certInitializer.credsPath }}/{{ .Values.certInitializer.clamp_ca_certs_pem }}"
-{{- else }}
-            cacert => "/clamp-cert/ca-certs.pem"
-{{- end }}
-            ssl_certificate_verification => false
-            user => ["${logstash_user}"]
-            password => ["${logstash_pwd}"]
-            index => "events-%{+YYYY.MM.DD}" # creates daily indexes
-            doc_as_upsert => true
-        }
-    }
-}
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml
deleted file mode 100644
index 3e98246..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/templates/configmap.yaml
+++ /dev/null
@@ -1,29 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml
deleted file mode 100644
index f098338..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/templates/deployment.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      - command:
-        - /app/ready.py
-        args:
-        - --container-name
-        - clamp-dash-es
-        env:
-        - name: NAMESPACE
-          valueFrom:
-            fieldRef:
-              apiVersion: v1
-              fieldPath: metadata.namespace
-        image: {{ include "repositoryGenerator.image.readiness" . }}
-        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-        name: {{ include "common.name" . }}-readiness
-{{ include "common.certInitializer.initContainer" . | indent 6 }}
-      containers:
-        - name: {{ include "common.name" . }}
-          image: {{ include "repositoryGenerator.repository" . }}/{{ .Values.image }}
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          env:
-          - name: dmaap_consumer_group
-            value: "{{ .Values.config.dmaapConsumerGroup }}"
-          - name: dmaap_consumer_id
-            value: "{{ .Values.config.dmaapConsumerId }}"
-          - name: event_topic
-            value: "{{ .Values.config.eventTopic }}"
-          - name: notification_topic
-            value: "{{ .Values.config.notificationTopic }}"
-          - name: request_topic
-            value: "{{ .Values.config.requestTopic }}"
-          - name: dmaap_base_url
-            value: {{ ternary "https" "http" .Values.security.ssl.enabled }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }}
-          - name: logstash_user
-            value: "{{ .Values.config.logstash_user }}"
-          - name: logstash_pwd
-            value: "{{ .Values.config.logstash_pwd }}"
-          - name: elasticsearch_base_url
-            value: "{{ ternary "https" "http" .Values.security.ssl.enabled }}://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}"
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-            name: {{ include "common.servicename" . }}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-            timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
-# disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-            timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
-          {{ end -}}
-          volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /usr/share/logstash/config/logstash.yml
-            name: {{ include "common.fullname" . }}
-            subPath: logstash.yml
-          - mountPath: /usr/share/logstash/pipeline/logstash.conf
-            name: {{ include "common.fullname" . }}
-            subPath: pipeline.conf
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: {{ include "common.fullname" . }}
-          configMap:
-            name: {{ include "common.fullname" . }}
-            items:
-            - key: logstash.yml
-              path: logstash.yml
-            - key: pipeline.conf
-              path: pipeline.conf
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml b/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml
deleted file mode 100644
index f1b6cf5..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/templates/service.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "common.servicename" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.config.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.config.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
diff --git a/kubernetes/clamp/components/clamp-dash-logstash/values.yaml b/kubernetes/clamp/components/clamp-dash-logstash/values.yaml
deleted file mode 100644
index 9aab3af..0000000
--- a/kubernetes/clamp/components/clamp-dash-logstash/values.yaml
+++ /dev/null
@@ -1,152 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  persistence: {}
-  centralizedLoggingEnabled: true
-  #AAF service
-  aafEnabled: true
-
-#################################################################
-# AAF part
-#################################################################
-certInitializer:
-  permission_user: 1000
-  permission_group: 999
-  addconfig: true
-  keystoreFile: "org.onap.clamp.p12"
-  truststoreFile: "org.onap.clamp.trust.jks"
-  keyFile: "org.onap.clamp.keyfile"
-  truststoreFileONAP: "truststoreONAPall.jks"
-  clamp_key: "org.onap.clamp.crt.key"
-  clamp_pem: "org.onap.clamp.key.pem"
-  clamp_ca_certs_pem: "clamp-ca-certs.pem"
-  nameOverride: clamp-logstash-cert-initializer
-  aafDeployFqi: deployer@people.osaaf.org
-  aafDeployPass: demo123456!
-  # aafDeployCredsExternalSecret: some secret
-  fqdn: clamp
-  fqi: clamp@clamp.onap.org
-  public_fqdn: clamp.onap.org
-  cadi_longitude: "0.0"
-  cadi_latitude: "0.0"
-  app_ns: org.osaaf.aaf
-  credsPath: /opt/app/osaaf/local
-  aaf_add_config: >
-    /opt/app/aaf_config/bin/agent.sh local showpass {{.Values.fqi}} {{ .Values.fqdn }} > {{ .Values.credsPath }}/mycreds.prop;
-    export $(/opt/app/aaf_config/bin/agent.sh local showpass | grep '^c' | xargs -0);
-    cd {{ .Values.credsPath }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -nocerts -nodes -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_key }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -clcerts -nokeys -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_pem }};
-    openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }};
-    chmod a+rx *;
-
-flavor: small
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-
-# application image
-image: onap/clamp-dashboard-logstash:5.0.4
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-config:
-  elasticsearchServiceName: cdash-es
-  elasticsearchPort: 9200
-  dmaapHost: message-router
-  dmaapSchemeSSL: https
-  dmaapSchemeNoSSL: http
-  dmaapPort: 3905
-  dmaapConsumerGroup: "clampdashboard"
-  dmaapConsumerId: "clampdashboard"
-  eventTopic: "DCAE-CL-EVENT"
-  notificationTopic: "POLICY-CL-MGT"
-  requestTopic: "APPC-CL"
-  logstash_user: "logstash"
-  logstash_pwd: "logstash"
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 900
-  periodSeconds: 20
-  timeoutSeconds: 5
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 900
-  periodSeconds: 20
-  timeoutSeconds: 5
-
-security:
-  ssl:
-    enabled: true
-
-service:
-  #Example service definition with external, internal and node ports.
-  #Services may use any combination of ports depending on the 'type' of
-  #service being defined.
-  type: ClusterIP
-  name: cdash-ls
-  portName: cdash-ls-healthcheck
-  externalPort: 9600
-  internalPort: 9600
-ingress:
-  enabled: false
-
-#resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 1.3Gi
-    requests:
-      cpu: 10m
-      memory: 750Mi
-  large:
-    limits:
-      cpu: 1
-      memory: 1.3Gi
-    requests:
-      cpu: 10m
-      memory: 750Mi
-  unlimited: {}
diff --git a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
deleted file mode 100644
index 1103aff..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml b/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
deleted file mode 100644
index d62ef09..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/requirements.yaml
+++ /dev/null
@@ -1,21 +0,0 @@
-# Copyright © 2020 Samsung Electronics
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: common
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
deleted file mode 100755
index 71f32e2..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/resources/config/init/docker-entrypoint.sh
+++ /dev/null
@@ -1,198 +0,0 @@
-#!/bin/bash
-set -eo pipefail
-shopt -s nullglob
-
-# if command starts with an option, prepend mysqld
-if [ "${1:0:1}" = '-' ]; then
-	set -- mysqld "$@"
-fi
-
-# skip setup if they want an option that stops mysqld
-wantHelp=
-for arg; do
-	case "$arg" in
-		-'?'|--help|--print-defaults|-V|--version)
-			wantHelp=1
-			break
-			;;
-	esac
-done
-
-prepare_password()
-{
-	echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g"
-}
-
-# usage: file_env VAR [DEFAULT]
-#    ie: file_env 'XYZ_DB_PASSWORD' 'example'
-# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of
-#  "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature)
-file_env() {
-	local var="$1"
-	local fileVar="${var}_FILE"
-	local def="${2:-}"
-	if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then
-		echo >&2 "error: both $var and $fileVar are set (but are exclusive)"
-		exit 1
-	fi
-	local val="$def"
-	if [ "${!var:-}" ]; then
-		val="${!var}"
-	elif [ "${!fileVar:-}" ]; then
-		val="$(< "${!fileVar}")"
-	fi
-	val=`prepare_password $val`
-	export "$var"="$val"
-	unset "$fileVar"
-}
-
-_check_config() {
-	toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" )
-	if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then
-		cat >&2 <<-EOM
-
-			ERROR: mysqld failed while attempting to check config
-			command was: "${toRun[*]}"
-
-			$errors
-		EOM
-		exit 1
-	fi
-}
-
-# Fetch value from server config
-# We use mysqld --verbose --help instead of my_print_defaults because the
-# latter only show values present in config files, and not server defaults
-_get_config() {
-	local conf="$1"; shift
-	"$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \
-		| awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }'
-	# match "datadir      /some/path with/spaces in/it here" but not "--xyz=abc\n     datadir (xyz)"
-}
-
-# allow the container to be started with `--user`
-if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then
-	_check_config "$@"
-	DATADIR="$(_get_config 'datadir' "$@")"
-	mkdir -p "$DATADIR"
-	find "$DATADIR" \! -user mysql -exec chown mysql '{}' +
-	exec gosu mysql "$BASH_SOURCE" "$@"
-fi
-
-if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then
-	# still need to check config, container may have started with --user
-	_check_config "$@"
-	# Get config
-	DATADIR="$(_get_config 'datadir' "$@")"
-
-	if [ ! -d "$DATADIR/mysql" ]; then
-		file_env 'MYSQL_ROOT_PASSWORD'
-		if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
-			echo >&2 'error: database is uninitialized and password option is not specified '
-			echo >&2 '  You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD'
-			exit 1
-		fi
-
-		mkdir -p "$DATADIR"
-
-		echo 'Initializing database'
-		# "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here)
-		mysql_install_db --datadir="$DATADIR" --rpm "${@:2}"
-		echo 'Database initialized'
-
-		SOCKET="$(_get_config 'socket' "$@")"
-		"$@" --skip-networking --socket="${SOCKET}" &
-		pid="$!"
-
-		mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" )
-
-		for i in {30..0}; do
-			if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then
-				break
-			fi
-			echo 'MySQL init process in progress...'
-			sleep 1
-		done
-		if [ "$i" = 0 ]; then
-			echo >&2 'MySQL init process failed.'
-			exit 1
-		fi
-
-		if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then
-			# sed is for https://bugs.mysql.com/bug.php?id=20545
-			mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql
-		fi
-
-		if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then
-			export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)"
-			echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD"
-		fi
-
-		rootCreate=
-		# default root to listen for connections from anywhere
-		file_env 'MYSQL_ROOT_HOST' '%'
-		if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then
-			# no, we don't care if read finds a terminating character in this heredoc
-			# https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151
-			read -r -d '' rootCreate <<-EOSQL || true
-				CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ;
-				GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ;
-			EOSQL
-		fi
-
-		"${mysql[@]}" <<-EOSQL
-			-- What's done in this file shouldn't be replicated
-			--  or products like mysql-fabric won't work
-			SET @@SESSION.SQL_LOG_BIN=0;
-
-			DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ;
-			SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ;
-			GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ;
-			${rootCreate}
-			DROP DATABASE IF EXISTS test ;
-			FLUSH PRIVILEGES ;
-		EOSQL
-
-		if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then
-			mysql+=( -p"${MYSQL_ROOT_PASSWORD}" )
-		fi
-
-		file_env 'MYSQL_DATABASE'
-		if [ "$MYSQL_DATABASE" ]; then
-			echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}"
-			mysql+=( "$MYSQL_DATABASE" )
-		fi
-
-		file_env 'MYSQL_USER'
-		file_env 'MYSQL_PASSWORD'
-		if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then
-			echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}"
-
-			if [ "$MYSQL_DATABASE" ]; then
-				echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}"
-			fi
-		fi
-
-		echo
-		for f in /docker-entrypoint-initdb.d/*; do
-			case "$f" in
-				*.sh)     echo "$0: running $f"; . "$f" ;;
-				*.sql)    echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;;
-				*.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;;
-				*)        echo "$0: ignoring $f" ;;
-			esac
-			echo
-		done
-
-		if ! kill -s TERM "$pid" || ! wait "$pid"; then
-			echo >&2 'MySQL init process failed.'
-			exit 1
-		fi
-
-		echo
-		echo 'MySQL init process done. Ready for start up.'
-		echo
-	fi
-fi
-
-exec "$@"
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
deleted file mode 100644
index 8b5dc2a..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
+++ /dev/null
@@ -1,209 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# Example MySQL config file for medium systems.
-#
-# This is for a system with memory 8G where MySQL plays
-# an important part, or systems up to 128M where MySQL is used together with
-# other programs (such as a web server)
-#
-# In this file, you can use all long options that a program supports.
-# If you want to know which options a program supports, run the program
-# with the "--help" option.
-*/}}
-
-# The following options will be passed to all MySQL clients
-##[client]
-##user            = root
-##port            = 3306
-##socket          = //opt/app/mysql/mysql.sock
-
-# Here follows entries for some specific programs
-
-# The MySQL server
-[mysqld]
-##performance_schema
-
-slow_query_log =ON
-long_query_time =2
-slow_query_log_file =//var/lib/mysql/slow_query.log
-##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
-##datadir         = //opt/app/mysql/data
-##port            = 3306
-##socket          = //opt/app/mysql/mysql.sock
-skip-external-locking
-explicit_defaults_for_timestamp = true
-skip-symbolic-links
-local-infile = 0
-#ignore_db_dir=lost+found
-key_buffer_size = 16M
-max_allowed_packet = 4M
-table_open_cache = 100
-sort_buffer_size = 512K
-net_buffer_length = 8K
-read_buffer_size = 256K
-read_rnd_buffer_size = 512K
-myisam_sort_buffer_size = 8M
-max_connections = 500
-lower_case_table_names = 1
-thread_stack = 256K
-thread_cache_size = 25
-query_cache_size = 8M
-query_cache_type = 0
-query_prealloc_size = 512K
-query_cache_limit = 1M
-
-# Password validation
-##plugin-load-add=simple_password_check.so
-##simple_password_check_other_characters=0
-
-# Audit Log settings
-plugin-load-add=server_audit.so
-server_audit=FORCE_PLUS_PERMANENT
-server_audit_file_path=//var/lib/mysql/audit.log
-server_audit_file_rotate_size=50M
-server_audit_events=CONNECT,QUERY,TABLE
-server_audit_logging=on
-
-# Don't listen on a TCP/IP port at all. This can be a security enhancement,
-# if all processes that need to connect to mysqld run on the same host.
-# All interaction with mysqld must be made via Unix sockets or named pipes.
-# Note that using this option without enabling named pipes on Windows
-# (via the "enable-named-pipe" option) will render mysqld useless!
-#
-#skip-networking
-
-# Replication Master Server (default)
-# binary logging is required for replication
-##log-bin=//var/lib/mysql/mysql-bin
-
-# binary logging format - mixed recommended
-binlog_format=row
-
-# required unique id between 1 and 2^32 - 1
-# defaults to 1 if master-host is not set
-# but will not function as a master if omitted
-
-# Replication Slave (comment out master section to use this)
-#
-# To configure this host as a replication slave, you can choose between
-# two methods :
-#
-# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
-#    the syntax is:
-#
-#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
-#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
-#
-#    where you replace <host>, <user>, <password> by quoted strings and
-#    <port> by the master's port number (3306 by default).
-#
-#    Example:
-#
-#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
-#    MASTER_USER='joe', MASTER_PASSWORD='secret';
-#
-# OR
-#
-# 2) Set the variables below. However, in case you choose this method, then
-#    start replication for the first time (even unsuccessfully, for example
-#    if you mistyped the password in master-password and the slave fails to
-#    connect), the slave will create a master.info file, and any later
-#    change in this file to the variables' values below will be ignored and
-#    overridden by the content of the master.info file, unless you shutdown
-#    the slave server, delete master.info and restart the slaver server.
-#    For that reason, you may want to leave the lines below untouched
-#    (commented) and instead use CHANGE MASTER TO (see above)
-#
-# required unique id between 2 and 2^32 - 1
-# (and different from the master)
-# defaults to 2 if master-host is set
-# but will not function as a slave if omitted
-#server-id       = 2
-#
-# The replication master for this slave - required
-#master-host     =   <hostname>
-#
-# The username the slave will use for authentication when connecting
-# to the master - required
-#master-user     =   <username>
-#
-# The password the slave will authenticate with when connecting to
-# the master - required
-#master-password =   <password>
-#
-# The port the master is listening on.
-# optional - defaults to 3306
-#master-port     =  <port>
-#
-# binary logging - not required for slaves, but recommended
-#log-bin=mysql-bin
-
-# Uncomment the following if you are using InnoDB tables
-##innodb_data_home_dir = //opt/app/mysql/data
-##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
-##innodb_log_group_home_dir = //opt/app/mysql/iblogs
-# You can set .._buffer_pool_size up to 50 - 80 %
-# of RAM but beware of setting memory usage too high
-innodb_buffer_pool_size = 128M
-#innodb_additional_mem_pool_size = 2M
-# Set .._log_file_size to 25 % of buffer pool size
-innodb_log_file_size = 10M
-innodb_log_files_in_group = 3
-innodb_log_buffer_size = 8M
-#innodb_flush_log_at_trx_commit = 1
-innodb_lock_wait_timeout = 50
-innodb_autoextend_increment = 100
-expire_logs_days = 8
-open_files_limit = 2000
-transaction-isolation=READ-COMMITTED
-####### Galera parameters #######
-## Galera Provider configuration
-wsrep_provider=/usr/lib/galera/libgalera_smm.so
-wsrep_provider_options="gcache.size=128M; gcache.page_size=10M"
-## Galera Cluster configuration
-wsrep_cluster_name="MSO-automated-tests-cluster"
-wsrep_cluster_address="gcomm://"
-#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
-##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
-## Galera Synchronization configuration
-wsrep_sst_method=rsync
-#wsrep_sst_method=xtrabackup-v2
-#wsrep_sst_auth="sstuser:Mon#2o!6"
-## Galera Node configuration
-wsrep_node_name="mariadb1"
-##wsrep_node_address="192.169.3.184"
-wsrep_on=OFF
-## Status notification
-#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
-#######
-
-
-[mysqldump]
-quick
-max_allowed_packet = 16M
-
-[mysql]
-no-auto-rehash
-# Remove the next comment character if you are not familiar with SQL
-#safe-updates
-
-[myisamchk]
-key_buffer_size = 20971520
-
-##[mysqlhotcopy]
-##interactive-timeout
-##[mysqld_safe]
-##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
-##log-error=//opt/app/mysql/log/mysqld.log
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt b/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
deleted file mode 100644
index 1103aff..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
deleted file mode 100644
index b8a774a..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/configmap.yaml
+++ /dev/null
@@ -1,57 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-#{{ if not .Values.disableClampClampMariadb }}
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: clamp-entrypoint-bulkload-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: clamp-mariadb-conf-configmap
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
----
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }}
-#{{ end }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
deleted file mode 100644
index 8ddf584..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/deployment.yaml
+++ /dev/null
@@ -1,113 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  replicas: {{ .Values.replicaCount }}
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      containers:
-        - name: {{ include "common.name" .  }}
-          image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.image }}
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-          # disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          - name: MYSQL_USER
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
-          - name: MYSQL_PASSWORD
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
-          - name: MYSQL_ROOT_PASSWORD
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }}
-          - name: MYSQL_DATABASE
-            value: {{ tpl .Values.db.databaseName .}}
-          volumeMounts:
-          - mountPath: /docker-entrypoint.sh
-            subPath: docker-entrypoint.sh
-            name: init-script
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          - mountPath: /docker-entrypoint-initdb.d/
-            name: docker-entrypoint-bulkload
-          - mountPath: /etc/mysql/conf.d/conf1/
-            name:  clamp-mariadb-conf
-          - mountPath: /var/lib/mysql
-            name: clamp-mariadb-data
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes:
-      {{- if .Values.persistence.enabled }}
-        - name: clamp-mariadb-data
-          persistentVolumeClaim:
-            claimName: {{ include "common.fullname" . }}
-      {{- else }}
-          emptyDir: {}
-      {{- end }}
-        - name: docker-entrypoint-bulkload
-          configMap:
-            name: clamp-entrypoint-bulkload-configmap
-        - name: clamp-mariadb-conf
-          configMap:
-            name: clamp-mariadb-conf-configmap
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-        - name: init-script
-          configMap:
-            name: {{ include "common.fullname" . }}
-            defaultMode: 0755
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
deleted file mode 100644
index 4249879..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/pv.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-{{- if eq "True" (include "common.needPV" .) -}}
-kind: PersistentVolume
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}-data
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-    name: {{ include "common.fullname" . }}
-spec:
-  capacity:
-    storage: {{ .Values.persistence.size}}
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  storageClassName: "{{ include "common.fullname" . }}-data"
-  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
-  hostPath:
-    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
-{{- end -}}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
deleted file mode 100644
index 6856c80..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/pvc.yaml
+++ /dev/null
@@ -1,40 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
-    release: "{{ include "common.release" . }}"
-    heritage: "{{ .Release.Service }}"
-{{- if .Values.persistence.annotations }}
-  annotations:
-{{ toYaml .Values.persistence.annotations | indent 4 }}
-{{- end }}
-spec:
-  accessModes:
-    - {{ .Values.persistence.accessMode }}
-  resources:
-    requests:
-      storage: {{ .Values.persistence.size }}
-  storageClassName: {{ include "common.storageClass" . }}
-{{- end -}}
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml b/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
deleted file mode 100644
index 4cf8155..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/templates/secrets.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{ include "common.secretFast" . }}
diff --git a/kubernetes/clamp/components/clamp-mariadb/values.yaml b/kubernetes/clamp/components/clamp-mariadb/values.yaml
deleted file mode 100644
index 60b2cfe..0000000
--- a/kubernetes/clamp/components/clamp-mariadb/values.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018-2019 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global: # global defaults
-  nodePortPrefix: 302
-
-  persistence: {}
-# application image
-image: mariadb:10.5.4
-pullPolicy: Always
-flavor: small
-#################################################################
-# Secrets metaconfig
-#################################################################
-secrets:
-  - uid: db-root-pass
-    type: password
-    externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}'
-    password: '{{ .Values.db.rootPass }}'
-  - uid: db-secret
-    type: basicAuth
-    externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}'
-    login: '{{ .Values.db.user }}'
-    password: '{{ .Values.db.password }}'
-
-# Application configuration
-# dummy value db user pasword to pass lint!!!
-db:
-  user: dummy-clds
-  password: dummy-sidnnd83K
-  databaseName: dummy-cldsdb4
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 30
-  periodSeconds: 10
-  timeoutSeconds: 3
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 30
-  periodSeconds: 10
-  timeoutSeconds: 3
-
-## Persist data to a persitent volume
-persistence:
-  enabled: true
-
-  ## A manually managed Persistent Volume and Claim
-  ## Requires persistence.enabled: true
-  ## If defined, PVC must be created manually before volume will be bound
-  # existingClaim:
-  volumeReclaimPolicy: Retain
-
-  ## database data Persistent Volume Storage Class
-  ## If defined, storageClassName: <storageClass>
-  ## If set to "-", storageClassName: "", which disables dynamic provisioning
-  ## If undefined (the default) or set to null, no storageClassName spec is
-  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
-  ##   GKE, AWS & OpenStack)
-  ##
-  # storageClass: "-"
-  accessMode: ReadWriteOnce
-  size: 2Gi
-  mountPath: /dockerdata-nfs
-  mountSubPath: clamp/mariadb/data
-
-service:
-  type: ClusterIP
-  name: clampdb
-  portName: clampdb
-  internalPort: 3306
-  externalPort: 3306
-
-
-ingress:
-  enabled: false
-
-
-#resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-resources:
-  small:
-    limits:
-      cpu: 1
-      memory: 500Mi
-    requests:
-      cpu: 10m
-      memory: 200Mi
-  large:
-    limits:
-      cpu: 1
-      memory: 500Mi
-    requests:
-      cpu: 10m
-      memory: 200Mi
-  unlimited: {}
diff --git a/kubernetes/clamp/requirements.yaml b/kubernetes/clamp/requirements.yaml
deleted file mode 100644
index 2d27103..0000000
--- a/kubernetes/clamp/requirements.yaml
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
-  - name: certInitializer
-    version: ~7.x-0
-    repository: '@local'
-  - name: repositoryGenerator
-    version: ~7.x-0
-    repository: '@local'
-  - name: clamp-mariadb
-    version: ~7.x-0
-    repository: 'file://components/clamp-mariadb'
-  - name: clamp-backend
-    version: ~7.x-0
-    repository: 'file://components/clamp-backend'
-  - name: clamp-dash-es
-    version: ~7.x-0
-    repository: 'file://components/clamp-dash-es'
-  - name: clamp-dash-logstash
-    version: ~7.x-0
-    repository: 'file://components/clamp-dash-logstash'
-  - name: clamp-dash-kibana
-    version: ~7.x-0
-    repository: 'file://components/clamp-dash-kibana'
\ No newline at end of file
diff --git a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index 8717e6f..0000000
--- a/kubernetes/clamp/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,55 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
-  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
-  paths:
-    - /var/log/onap/*/*/*/*.log
-    - /var/log/onap/*/*/*.log
-    - /var/log/onap/*/*.log
-  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
-  ignore_older: 48h
-  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
-  clean_inactive: 96h
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
-  #List of logstash server ip addresses with port number.
-  #But, in our case, this will be the loadbalancer IP address.
-  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
-  hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
-  #If enable will do load balancing among availabe Logstash, automatically.
-  loadbalance: true
-
-  #The list of root certificates for server verifications.
-  #If certificate_authorities is empty or not set, the trusted
-  #certificate authorities of the host system are used.
-  #ssl.certificate_authorities: $ssl.certificate_authorities
-
-  #The path to the certificate for SSL client authentication. If the certificate is not specified,
-  #client authentication is not available.
-  #ssl.certificate: $ssl.certificate
-
-  #The client certificate key used for client authentication.
-  #ssl.key: $ssl.key
-
-  #The passphrase used to decrypt an encrypted key stored in the configured key file
-  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/clamp/templates/NOTES.txt b/kubernetes/clamp/templates/NOTES.txt
deleted file mode 100644
index e36d6a5..0000000
--- a/kubernetes/clamp/templates/NOTES.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit https://127.0.0.1:8443 to use your application"
-  kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/clamp/templates/configmap.yaml b/kubernetes/clamp/templates/configmap.yaml
deleted file mode 100644
index 1a5b0ce..0000000
--- a/kubernetes/clamp/templates/configmap.yaml
+++ /dev/null
@@ -1,31 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
-
-{{ include "common.log.configMap" . }}
diff --git a/kubernetes/clamp/templates/secrets.yaml b/kubernetes/clamp/templates/secrets.yaml
deleted file mode 100644
index 4cf8155..0000000
--- a/kubernetes/clamp/templates/secrets.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-{{ include "common.secretFast" . }}
diff --git a/kubernetes/clamp/templates/service.yaml b/kubernetes/clamp/templates/service.yaml
deleted file mode 100644
index 31f4380..0000000
--- a/kubernetes/clamp/templates/service.yaml
+++ /dev/null
@@ -1,69 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-# Modifications Copyright © 2018 AT&T
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Values.service.name }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.portName }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.portName }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
----
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Values.service.name2 }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type2 }}
-  ports:
-    {{if eq .Values.service.type2 "NodePort" -}}
-    - port: {{ .Values.service.internalPort2 }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
-      name: {{ .Values.config.portName2 }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort2 }}
-      targetPort: {{ .Values.service.internalPort2 }}
-      name: {{ .Values.config.portName2 }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}
\ No newline at end of file
diff --git a/kubernetes/onap/requirements.yaml b/kubernetes/onap/requirements.yaml
index 335629d..3e96bdf 100755
--- a/kubernetes/onap/requirements.yaml
+++ b/kubernetes/onap/requirements.yaml
@@ -39,10 +39,6 @@
     version: ~7.x-0
     repository: '@local'
     condition: cds.enabled
-  - name: clamp
-    version: ~7.x-0
-    repository: '@local'
-    condition: clamp.enabled
   - name: cli
     version: ~7.x-0
     repository: '@local'
diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/policy/components/policy-clamp-be/Chart.yaml
similarity index 91%
rename from kubernetes/clamp/components/clamp-mariadb/Chart.yaml
rename to kubernetes/policy/components/policy-clamp-be/Chart.yaml
index c0de185..fd48cc2 100644
--- a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/Chart.yaml
@@ -14,6 +14,6 @@
 # limitations under the License.
 
 apiVersion: v1
-description: MariaDB Service
-name: clamp-mariadb
+description: ONAP Policy Clamp Backend
+name: policy-clamp-be
 version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-backend/requirements.yaml b/kubernetes/policy/components/policy-clamp-be/requirements.yaml
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/requirements.yaml
rename to kubernetes/policy/components/policy-clamp-be/requirements.yaml
diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/application.properties b/kubernetes/policy/components/policy-clamp-be/resources/config/application.properties
similarity index 91%
rename from kubernetes/clamp/components/clamp-backend/resources/config/application.properties
rename to kubernetes/policy/components/policy-clamp-be/resources/config/application.properties
index 8dd0fc7..17185cc 100644
--- a/kubernetes/clamp/components/clamp-backend/resources/config/application.properties
+++ b/kubernetes/policy/components/policy-clamp-be/resources/config/application.properties
@@ -44,11 +44,11 @@
 #clds datasource connection details
 spring.datasource.username=${MYSQL_USER}
 spring.datasource.password=${MYSQL_PASSWORD}
-spring.datasource.url=jdbc:mariadb:sequential://clampdb.{{ include "common.namespace" . }}:3306/${MYSQL_DATABASE}?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
+spring.datasource.url=jdbc:mariadb:sequential://{{ .Values.db.service.name }}:{{ .Values.db.service.internalPort }}/policyclamp?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
 spring.profiles.active=clamp-default,clamp-aaf-authentication,clamp-sdc-controller,clamp-ssl-config,clamp-policy-controller,default-dictionary-elements
 
 #The log folder that will be used in logback.xml file
-clamp.config.files.sdcController=file:/opt/clamp/sdc-controllers-config.json
+clamp.config.files.sdcController=file:/opt/policy/clamp/sdc-controllers-config.json
 
 #
 # Configuration Settings for Policy Engine Components
diff --git a/kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml b/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
old mode 100644
new mode 100755
similarity index 66%
rename from kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml
rename to kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
index e5d7174..329479f
--- a/kubernetes/clamp/components/clamp-dash-kibana/templates/ingress.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/resources/config/create-db-tables.sh
@@ -1,4 +1,7 @@
-{{/* # Copyright © 2020 Samsung, Orange
+#!/bin/sh
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+# Modifications Copyright © 2018, 2020-2021 AT&T Intellectual Property
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -13,4 +16,4 @@
 # limitations under the License.
 */}}
 
-{{ include "common.ingress" . }}
+mysql -h"${MYSQL_HOST}" -P"${MYSQL_PORT}" -u"${MYSQL_USER}" -p"${MYSQL_PASSWORD}" policyclamp < /dbcmd-config/policy-clamp-create-tables.sql
diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/policy/components/policy-clamp-be/resources/config/log/filebeat/filebeat.yml
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml
rename to kubernetes/policy/components/policy-clamp-be/resources/config/log/filebeat/filebeat.yml
diff --git a/kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/policy/components/policy-clamp-be/resources/config/policy-clamp-create-tables.sql
similarity index 100%
rename from kubernetes/clamp/components/clamp-mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql
rename to kubernetes/policy/components/policy-clamp-be/resources/config/policy-clamp-create-tables.sql
diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/policy/components/policy-clamp-be/resources/config/sdc-controllers-config.json
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/resources/config/sdc-controllers-config.json
rename to kubernetes/policy/components/policy-clamp-be/resources/config/sdc-controllers-config.json
diff --git a/kubernetes/clamp/components/clamp-backend/templates/NOTES.txt b/kubernetes/policy/components/policy-clamp-be/templates/NOTES.txt
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/templates/NOTES.txt
rename to kubernetes/policy/components/policy-clamp-be/templates/NOTES.txt
diff --git a/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml b/kubernetes/policy/components/policy-clamp-be/templates/configmap.yaml
similarity index 95%
rename from kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml
rename to kubernetes/policy/components/policy-clamp-be/templates/configmap.yaml
index fe0349e..aeadc37 100644
--- a/kubernetes/clamp/components/clamp-dash-es/templates/configmap.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/templates/configmap.yaml
@@ -27,3 +27,5 @@
     heritage: {{ .Release.Service }}
 data:
 {{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+
+{{ include "common.log.configMap" . }}
diff --git a/kubernetes/clamp/components/clamp-backend/templates/deployment.yaml b/kubernetes/policy/components/policy-clamp-be/templates/deployment.yaml
similarity index 90%
rename from kubernetes/clamp/components/clamp-backend/templates/deployment.yaml
rename to kubernetes/policy/components/policy-clamp-be/templates/deployment.yaml
index 9153f9d..1120f9b 100644
--- a/kubernetes/clamp/components/clamp-backend/templates/deployment.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/templates/deployment.yaml
@@ -40,8 +40,8 @@
       - command:
         - /app/ready.py
         args:
-        - --container-name
-        - clamp-mariadb
+        - --job-name
+        - {{ include "common.release" . }}-policy-clamp-galera-config
         env:
         - name: NAMESPACE
           valueFrom:
@@ -61,14 +61,14 @@
           imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
           command:
           - sh
-          workingDir: "/opt/clamp/"
+          workingDir: "/opt/policy/clamp/"
           args:
           - -c
           - |
           {{- if .Values.global.aafEnabled }}
             export $(grep '^cadi_' {{ .Values.certInitializer.credsPath }}/org.onap.clamp.cred.props | xargs -0)
           {{- end }}
-            java -Djava.security.egd=file:/dev/./urandom ${JAVA_RAM_CONFIGURATION} -jar ./app.jar
+            java -Djava.security.egd=file:/dev/./urandom ${JAVA_RAM_CONFIGURATION} -jar ./policy-clamp-backend.jar
           ports:
           - containerPort: {{ .Values.service.internalPort }}
           # disable liveness probe when breakpoints set in debugger
@@ -88,19 +88,17 @@
           volumeMounts: {{ include "common.certInitializer.volumeMount" . | nindent 10 }}
           - name: logs
             mountPath: {{ .Values.log.path }}
-          - mountPath: /opt/clamp/sdc-controllers-config.json
+          - mountPath: /opt/policy/clamp/sdc-controllers-config.json
             name: {{ include "common.fullname" . }}-config
             subPath: sdc-controllers-config.json
-          - mountPath: /opt/clamp/application.properties
+          - mountPath: /opt/policy/clamp/application.properties
             name: {{ include "common.fullname" . }}-config
             subPath: application.properties
           env:
           - name: MYSQL_USER
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }}
+            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-creds" "key" "login") | indent 12 }}
           - name: MYSQL_PASSWORD
-            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }}
-          - name: MYSQL_DATABASE
-            value: {{ tpl .Values.db.databaseName .}}
+            {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-creds" "key" "password") | indent 12 }}
           {{-  if ne "unlimited" (include "common.flavor" .) }}
           - name: JAVA_RAM_CONFIGURATION
             value: -XX:MinRAMPercentage=50 -XX:MaxRAMPercentage=75
@@ -115,7 +113,7 @@
       volumes: {{ include "common.certInitializer.volumes" . | nindent 8 }}
         - name: {{ include "common.fullname" . }}-config
           configMap:
-            name: {{ include "common.fullname" . }}
+            name: {{ include "common.fullname" . }}-configmap
             items:
             - key: sdc-controllers-config.json
               path: sdc-controllers-config.json
diff --git a/kubernetes/policy/components/policy-clamp-be/templates/job.yaml b/kubernetes/policy/components/policy-clamp-be/templates/job.yaml
new file mode 100755
index 0000000..c5c968a
--- /dev/null
+++ b/kubernetes/policy/components/policy-clamp-be/templates/job.yaml
@@ -0,0 +1,84 @@
+{{/*
+# Copyright © 2018 Amdocs, Bell Canada
+# Modifications Copyright © 2020-2021 AT&T Intellectual Property
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ include "common.release" . }}-policy-clamp-galera-config
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}-policy-clamp-job
+    release: {{ include "common.release" . }}
+spec:
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}-policy-clamp-job
+        release: {{ include "common.release" . }}
+    spec:
+      initContainers:
+#This container checks that all galera instances are up before initializing it.
+      - name: {{ include "common.name" . }}-readiness
+        image: {{ include "repositoryGenerator.image.readiness" . }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        command:
+        - /app/ready.py
+        - --job-name
+        - {{ include "common.release" . }}-policy-galera-config
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+      containers:
+      - name: {{ include "common.release" . }}-policy-clamp-galera-config
+        image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.db.image }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        volumeMounts:
+        - mountPath: /dbcmd-config/create-db-tables.sh
+          name: {{ include "common.fullname" . }}-config
+          subPath: create-db-tables.sh
+        - mountPath: /dbcmd-config/policy-clamp-create-tables.sql
+          name: {{ include "common.fullname" . }}-config
+          subPath: policy-clamp-create-tables.sql
+        command:
+        - /bin/sh
+        args:
+        - -x
+        - /dbcmd-config/create-db-tables.sh
+        env:
+        - name: MYSQL_HOST
+          value: "{{ .Values.db.service.name }}"
+        - name: MYSQL_USER
+          {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-creds" "key" "login") | indent 10 }}
+        - name: MYSQL_PASSWORD
+          {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-creds" "key" "password") | indent 10 }}
+        - name: MYSQL_PORT
+          value: "{{ .Values.db.service.internalPort }}"
+        resources:
+{{ include "common.resources" . }}
+      restartPolicy: Never
+      volumes:
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+              - key: create-db-tables.sh
+                path: create-db-tables.sh
+              - key: policy-clamp-create-tables.sql
+                path: policy-clamp-create-tables.sql
diff --git a/kubernetes/clamp/components/clamp-backend/templates/secrets.yaml b/kubernetes/policy/components/policy-clamp-be/templates/secrets.yaml
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/templates/secrets.yaml
rename to kubernetes/policy/components/policy-clamp-be/templates/secrets.yaml
diff --git a/kubernetes/clamp/components/clamp-backend/templates/service.yaml b/kubernetes/policy/components/policy-clamp-be/templates/service.yaml
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/templates/service.yaml
rename to kubernetes/policy/components/policy-clamp-be/templates/service.yaml
diff --git a/kubernetes/clamp/components/clamp-backend/values.yaml b/kubernetes/policy/components/policy-clamp-be/values.yaml
similarity index 92%
rename from kubernetes/clamp/components/clamp-backend/values.yaml
rename to kubernetes/policy/components/policy-clamp-be/values.yaml
index efd08ba..1446ac4 100644
--- a/kubernetes/clamp/components/clamp-backend/values.yaml
+++ b/kubernetes/policy/components/policy-clamp-be/values.yaml
@@ -53,9 +53,9 @@
     chmod a+rx *;
 
 secrets:
-  - uid: db-secret
+  - uid: db-creds
     type: basicAuth
-    externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}'
+    externalSecret: '{{ tpl (default "" .Values.db.credsExternalSecret) . }}'
     login: '{{ .Values.db.user }}'
     password: '{{ .Values.db.password }}'
     passwordPolicy: required
@@ -63,7 +63,7 @@
 flavor: small
 
 # application image
-image: onap/clamp-backend:5.1.5
+image: onap/policy-clamp-backend:6.0.0
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -80,9 +80,12 @@
 #####dummy values for db user and password to pass lint!!!#######
 
 db:
-  user: dummyclds
-  password: dummysidnnd83K
-  databaseName: dummycldsdb4
+  user: policy_user
+  password: policy_user
+  image: mariadb:10.5.8
+  service:
+    name: policy-mariadb
+    internalPort: 3306
 
 config:
   log:
@@ -114,10 +117,10 @@
 
 service:
   type: ClusterIP
-  name: clamp-backend
-  portName: clamp-backend
+  name: policy-clamp-be
+  portName: policy-clamp-be
   internalPort: 8443
-  externalPort: 443
+  externalPort: 8443
 
 ingress:
   enabled: false
diff --git a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml b/kubernetes/policy/components/policy-clamp-fe/Chart.yaml
similarity index 91%
copy from kubernetes/clamp/components/clamp-mariadb/Chart.yaml
copy to kubernetes/policy/components/policy-clamp-fe/Chart.yaml
index c0de185..331ba86 100644
--- a/kubernetes/clamp/components/clamp-mariadb/Chart.yaml
+++ b/kubernetes/policy/components/policy-clamp-fe/Chart.yaml
@@ -14,6 +14,6 @@
 # limitations under the License.
 
 apiVersion: v1
-description: MariaDB Service
-name: clamp-mariadb
+description: ONAP Policy Clamp Frontend
+name: policy-clamp-fe
 version: 7.0.0
diff --git a/kubernetes/clamp/components/clamp-backend/requirements.yaml b/kubernetes/policy/components/policy-clamp-fe/requirements.yaml
similarity index 100%
copy from kubernetes/clamp/components/clamp-backend/requirements.yaml
copy to kubernetes/policy/components/policy-clamp-fe/requirements.yaml
diff --git a/kubernetes/clamp/resources/config/default.conf b/kubernetes/policy/components/policy-clamp-fe/resources/config/default.conf
similarity index 93%
rename from kubernetes/clamp/resources/config/default.conf
rename to kubernetes/policy/components/policy-clamp-fe/resources/config/default.conf
index 3e6fde9..4cab734 100644
--- a/kubernetes/clamp/resources/config/default.conf
+++ b/kubernetes/policy/components/policy-clamp-fe/resources/config/default.conf
@@ -12,7 +12,7 @@
 
   ssl_verify_client optional_no_ca;
     location /restservices/clds/ {
-        proxy_pass https://clamp-backend:443;
+        proxy_pass https://policy-clamp-be:8443;
         proxy_set_header X-SSL-Cert $ssl_client_escaped_cert;
     }
 
diff --git a/kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/policy/components/policy-clamp-fe/resources/config/log/filebeat/filebeat.yml
similarity index 100%
copy from kubernetes/clamp/components/clamp-backend/resources/config/log/filebeat/filebeat.yml
copy to kubernetes/policy/components/policy-clamp-fe/resources/config/log/filebeat/filebeat.yml
diff --git a/kubernetes/clamp/components/clamp-backend/templates/NOTES.txt b/kubernetes/policy/components/policy-clamp-fe/templates/NOTES.txt
similarity index 100%
copy from kubernetes/clamp/components/clamp-backend/templates/NOTES.txt
copy to kubernetes/policy/components/policy-clamp-fe/templates/NOTES.txt
diff --git a/kubernetes/clamp/components/clamp-backend/templates/configmap.yaml b/kubernetes/policy/components/policy-clamp-fe/templates/configmap.yaml
similarity index 100%
rename from kubernetes/clamp/components/clamp-backend/templates/configmap.yaml
rename to kubernetes/policy/components/policy-clamp-fe/templates/configmap.yaml
diff --git a/kubernetes/clamp/templates/deployment.yaml b/kubernetes/policy/components/policy-clamp-fe/templates/deployment.yaml
similarity index 98%
rename from kubernetes/clamp/templates/deployment.yaml
rename to kubernetes/policy/components/policy-clamp-fe/templates/deployment.yaml
index 51b864b..97c7919 100644
--- a/kubernetes/clamp/templates/deployment.yaml
+++ b/kubernetes/policy/components/policy-clamp-fe/templates/deployment.yaml
@@ -41,7 +41,7 @@
         - /app/ready.py
         args:
         - --container-name
-        - clamp-backend
+        - policy-clamp-be
         env:
         - name: NAMESPACE
           valueFrom:
diff --git a/kubernetes/clamp/templates/ingress.yaml b/kubernetes/policy/components/policy-clamp-fe/templates/ingress.yaml
similarity index 100%
rename from kubernetes/clamp/templates/ingress.yaml
rename to kubernetes/policy/components/policy-clamp-fe/templates/ingress.yaml
diff --git a/kubernetes/clamp/components/clamp-backend/templates/secrets.yaml b/kubernetes/policy/components/policy-clamp-fe/templates/secrets.yaml
similarity index 100%
copy from kubernetes/clamp/components/clamp-backend/templates/secrets.yaml
copy to kubernetes/policy/components/policy-clamp-fe/templates/secrets.yaml
diff --git a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml b/kubernetes/policy/components/policy-clamp-fe/templates/service.yaml
similarity index 94%
rename from kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
rename to kubernetes/policy/components/policy-clamp-fe/templates/service.yaml
index 20a5065..b4549ba 100644
--- a/kubernetes/clamp/components/clamp-mariadb/templates/service.yaml
+++ b/kubernetes/policy/components/policy-clamp-fe/templates/service.yaml
@@ -18,7 +18,7 @@
 apiVersion: v1
 kind: Service
 metadata:
-  name: {{ include "common.servicename" . }}
+  name: {{ .Values.service.name }}
   namespace: {{ include "common.namespace" . }}
   labels:
     app: {{ include "common.name" . }}
@@ -31,11 +31,13 @@
     {{if eq .Values.service.type "NodePort" -}}
     - port: {{ .Values.service.internalPort }}
       nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
     {{- else -}}
     - port: {{ .Values.service.externalPort }}
       targetPort: {{ .Values.service.internalPort }}
-    {{- end}}
       name: {{ .Values.service.portName }}
+    {{- end}}
   selector:
     app: {{ include "common.name" . }}
     release: {{ include "common.release" . }}
+---
diff --git a/kubernetes/clamp/values.yaml b/kubernetes/policy/components/policy-clamp-fe/values.yaml
similarity index 83%
rename from kubernetes/clamp/values.yaml
rename to kubernetes/policy/components/policy-clamp-fe/values.yaml
index b2b37d3..91a096d 100644
--- a/kubernetes/clamp/values.yaml
+++ b/kubernetes/policy/components/policy-clamp-fe/values.yaml
@@ -56,40 +56,13 @@
     openssl pkcs12 -in {{ .Values.keystoreFile }} -cacerts -nokeys -chain -passin pass:$cadi_keystore_password_p12 > {{ .Values.clamp_ca_certs_pem }};
     chmod a+rx *;
 
-secrets:
-  - uid: db-root-pass
-    name: &dbRootPass '{{ include "common.release" . }}-clamp-db-root-pass'
-    type: password
-    password: '{{ .Values.db.rootPass }}'
-  - uid: db-secret
-    name: &dbUserPass '{{ include "common.release" . }}-clamp-db-user-pass'
-    type: basicAuth
-    login: '{{ .Values.db.user }}'
-    password: '{{ .Values.db.password }}'
-
-db:
-  user: clds
-#  password: sidnnd83K
-  databaseName: &dbName cldsdb4
-#    rootPass: emrys  user: testos
-
-clamp-backend:
-  db:
-    userCredsExternalSecret: *dbUserPass
-    databaseName: *dbName
-clamp-mariadb:
-  db:
-    rootCredsExternalSecret: *dbRootPass
-    userCredsExternalSecret: *dbUserPass
-    databaseName: *dbName
-
 subChartsOnly:
   enabled: true
 
 flavor: small
 
 # application image
-image: onap/clamp-frontend:5.1.5
+image: onap/policy-clamp-frontend:6.0.0
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -131,20 +104,14 @@
 
 service:
   type: NodePort
-  name: clamp-external
-  portName: clamp-external
+  name: policy-clamp-fe
+  portName: policy-clamp-fe
   internalPort: 2443
   nodePort: 58
 
   # as of 20180904 port 58 is reserved for clamp from log/logdemonode
   # see https://wiki.onap.org/display/DW/OOM+NodePort+List
 
-  type2: ClusterIP
-  name2: clamp
-  portName2: clamp-internal
-  internalPort2: 2443
-  externalPort2: 8443
-
 ingress:
   enabled: false
   service:
diff --git a/kubernetes/policy/requirements.yaml b/kubernetes/policy/requirements.yaml
index b2f2b74..22e3dfa 100755
--- a/kubernetes/policy/requirements.yaml
+++ b/kubernetes/policy/requirements.yaml
@@ -48,6 +48,14 @@
     version: ~7.x-0
     repository: 'file://components/policy-distribution'
     condition: policy-distribution.enabled
+  - name: policy-clamp-be
+    version: ~7.x-0
+    repository: 'file://components/policy-clamp-be'
+    condition: policy-clamp-be.enabled
+  - name: policy-clamp-fe
+    version: ~7.x-0
+    repository: 'file://components/policy-clamp-fe'
+    condition: policy-clamp-fe.enabled
   - name: repositoryGenerator
     version: ~7.x-0
     repository: '@local'
diff --git a/kubernetes/policy/resources/config/db.sh b/kubernetes/policy/resources/config/db.sh
index 0d7ce07..90c9879 100755
--- a/kubernetes/policy/resources/config/db.sh
+++ b/kubernetes/policy/resources/config/db.sh
@@ -18,7 +18,7 @@
 
 mysql() { /usr/bin/mysql  -h ${MYSQL_HOST} -P ${MYSQL_USER} "$@"; };
 
-for db in support onap_sdk log migration operationshistory10 pooling policyadmin operationshistory
+for db in support onap_sdk log migration operationshistory10 pooling policyadmin policyclamp operationshistory
 do
 	mysql -uroot -p"${MYSQL_ROOT_PASSWORD}" --execute "CREATE DATABASE IF NOT EXISTS ${db};"
 	mysql -uroot -p"${MYSQL_ROOT_PASSWORD}" --execute "GRANT ALL PRIVILEGES ON \`${db}\`.* TO '${MYSQL_USER}'@'%' ;"
diff --git a/kubernetes/policy/values.yaml b/kubernetes/policy/values.yaml
index d098954..678772c 100755
--- a/kubernetes/policy/values.yaml
+++ b/kubernetes/policy/values.yaml
@@ -66,6 +66,11 @@
 policy-distribution:
   enabled: true
   db: *dbSecretsHook
+policy-clamp-be:
+  enabled: true
+  db: *dbSecretsHook
+policy-clamp-fe:
+  enabled: true
 policy-nexus:
   enabled: false
 
diff --git a/kubernetes/robot/resources/config/eteshare/config/robot_properties.py b/kubernetes/robot/resources/config/eteshare/config/robot_properties.py
index ef12c9a..50117bd 100644
--- a/kubernetes/robot/resources/config/eteshare/config/robot_properties.py
+++ b/kubernetes/robot/resources/config/eteshare/config/robot_properties.py
@@ -20,7 +20,7 @@
 GLOBAL_INJECTED_APPC_CDT_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "appc-cdt") }}'
 GLOBAL_INJECTED_ARTIFACTS_VERSION = '{{.Values.demoArtifactsVersion}}'
 GLOBAL_INJECTED_ARTIFACTS_REPO_URL = "{{ .Values.demoArtifactsRepoUrl }}"
-GLOBAL_INJECTED_CLAMP_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "clamp") }}'
+GLOBAL_INJECTED_CLAMP_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "policy-clamp-fe") }}'
 GLOBAL_INJECTED_CLI_IP_ADDR = '{{include "robot.ingress.svchost" (dict "root" . "hostname" "cli") }}'
 GLOBAL_INJECTED_CLOUD_ENV = 'openstack'
 GLOBAL_INJECTED_DCAE_COLLECTOR_IP = "{{ .Values.dcaeCollectorIp }}"
@@ -152,7 +152,7 @@
 GLOBAL_SDC_AUTHENTICATION = [GLOBAL_SDC_USERNAME, GLOBAL_SDC_PASSWORD]
 # clamp info - everything is from the private oam network (also called onap private network)
 GLOBAL_CLAMP_SERVER_PROTOCOL = "https"
-GLOBAL_CLAMP_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "clamp" "port" 8443) }}'
+GLOBAL_CLAMP_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "policy-clamp-fe" "port" 2443) }}'
 # nbi info - everything is from the private oam network (also called onap private network)
 GLOBAL_NBI_SERVER_PROTOCOL = "https"
 GLOBAL_NBI_SERVER_PORT = '{{include "robot.ingress.port" (dict "root" . "hostname" "nbi" "port" 8443) }}'