Fix the issue fetch log of esr in kibana
Issue-ID: AAI-756
Change-Id: I6c09dfcfc3c8a0ac5a509a08a84397eca5a53673
Signed-off-by: Li Zi <li.zi30@zte.com.cn>
diff --git a/kubernetes/esr/charts/esr-gui/templates/service.yaml b/kubernetes/esr/charts/esr-gui/templates/service.yaml
index f197aa1..a847eba 100644
--- a/kubernetes/esr/charts/esr-gui/templates/service.yaml
+++ b/kubernetes/esr/charts/esr-gui/templates/service.yaml
@@ -16,7 +16,7 @@
apiVersion: v1
kind: Service
metadata:
- name: {{ .Values.service.name }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
diff --git a/kubernetes/esr/charts/esr-server/Chart.yaml b/kubernetes/esr/charts/esr-server/Chart.yaml
new file mode 100644
index 0000000..455e341
--- /dev/null
+++ b/kubernetes/esr/charts/esr-server/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP External System Register GUI
+name: esr-server
+version: 2.0.0
diff --git a/kubernetes/esr/charts/esr-server/requirements.yaml b/kubernetes/esr/charts/esr-server/requirements.yaml
new file mode 100644
index 0000000..03da823
--- /dev/null
+++ b/kubernetes/esr/charts/esr-server/requirements.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/esr/resources/config/log/filebeat/filebeat.yml b/kubernetes/esr/charts/esr-server/resources/config/log/filebeat/filebeat.yml
similarity index 94%
rename from kubernetes/esr/resources/config/log/filebeat/filebeat.yml
rename to kubernetes/esr/charts/esr-server/resources/config/log/filebeat/filebeat.yml
index d099a42..1e6b5cd 100644
--- a/kubernetes/esr/resources/config/log/filebeat/filebeat.yml
+++ b/kubernetes/esr/charts/esr-server/resources/config/log/filebeat/filebeat.yml
@@ -16,10 +16,9 @@
- input_type: log
#This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
paths:
- - /home/esr/works/logs/*.log
-# - /var/log/onap/*/*/*/*.log
-# - /var/log/onap/*/*/*.log
-# - /var/log/onap/*/*.log
+ - /var/log/onap/*/*/*/*.log
+ - /var/log/onap/*/*/*.log
+ - /var/log/onap/*/*.log
#Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
ignore_older: 48h
# Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
diff --git a/kubernetes/esr/charts/esr-server/resources/config/logback.xml b/kubernetes/esr/charts/esr-server/resources/config/logback.xml
new file mode 100644
index 0000000..c647f3d
--- /dev/null
+++ b/kubernetes/esr/charts/esr-server/resources/config/logback.xml
@@ -0,0 +1,135 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<configuration scan="false" debug="true">
+ <property name="p_tim" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}"/>
+ <property name="p_lvl" value="%level"/>
+ <property name="p_log" value="%logger"/>
+ <property name="p_mdc" value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}"/>
+ <property name="p_msg" value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_exc" value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_mak" value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}"/>
+ <property name="p_thr" value="%thread"/>
+ <property name="pattern" value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n"/>
+
+ <property name="logDir" value="/var/log/onap" />
+ <property name="debugDir" value="/var/log/onap" />
+
+ <property name="componentName" value="esr"></property>
+ <property name="subComponentName" value="esr-server"></property>
+
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+
+ <property name="errorPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%.-5level|%X{ErrorCode}|%X{ErrorDesc}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+ <property name="debugPattern" value="%d{"yyyy-MM-dd'T'HH:mm:ss.SSSXXX", UTC}|%X{RequestId}|%msg%n\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+
+ <property name="auditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||||||%msg%n" />
+ <property name="metricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread||%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDesc}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{RemoteHost}||||%X{TargetVirtualEntity}|||||%msg%n" />
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="debugLogDirectory" value="${debugDir}/${componentName}/${subComponentName}" />
+
+ <appender name="EELFAudit"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${auditPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+
+ <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${metricPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFMetrics"/>
+ </appender>
+
+ <appender name="EELFError"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFError"/>
+ </appender>
+
+ <appender name="EELFDebug"
+ class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${debugLogDirectory}/${debugLogName}.log</file>
+ <rollingPolicy
+ class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${debugLogDirectory}/${debugLogName}.log.%d</fileNamePattern>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+ <queueSize>256</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+
+ <logger name="com.att.eelf.audit" level="info" additivity="false">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+
+ <logger name="com.att.eelf.metrics" level="info" additivity="false">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+
+ <logger name="com.att.eelf.error" level="debug" additivity="false">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+
+</configuration>
+
diff --git a/kubernetes/esr/templates/NOTES.txt b/kubernetes/esr/charts/esr-server/templates/NOTES.txt
similarity index 79%
rename from kubernetes/esr/templates/NOTES.txt
rename to kubernetes/esr/charts/esr-server/templates/NOTES.txt
index d7c50a9..5da4ade 100644
--- a/kubernetes/esr/templates/NOTES.txt
+++ b/kubernetes/esr/charts/esr-server/templates/NOTES.txt
@@ -1,4 +1,4 @@
-# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
@@ -11,11 +11,15 @@
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
+
1. Get the application URL by running these commands:
{{- if .Values.ingress.enabled }}
{{- range .Values.ingress.hosts }}
http://{{ . }}
{{- end }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
NOTE: It may take a few minutes for the LoadBalancer IP to be available.
You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
diff --git a/kubernetes/esr/templates/configmap.yaml b/kubernetes/esr/charts/esr-server/templates/configmap.yaml
similarity index 82%
rename from kubernetes/esr/templates/configmap.yaml
rename to kubernetes/esr/charts/esr-server/templates/configmap.yaml
index 18a4f84..10a7a43 100644
--- a/kubernetes/esr/templates/configmap.yaml
+++ b/kubernetes/esr/charts/esr-server/templates/configmap.yaml
@@ -16,7 +16,7 @@
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-esr-filebeat
+ name: {{ include "common.fullname" . }}-log
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
@@ -24,12 +24,12 @@
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/logback.xml").AsConfig . | indent 2 }}
---
apiVersion: v1
kind: ConfigMap
metadata:
- name: {{ include "common.fullname" . }}-esr-esrserver-log
+ name: {{ include "common.fullname" . }}-esr-filebeat-configmap
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
@@ -37,4 +37,4 @@
release: {{ .Release.Name }}
heritage: {{ .Release.Service }}
data:
-{{ tpl (.Files.Glob "resources/config/log/esrserver/logback.xml").AsConfig . | indent 2 }}
+{{ tpl (.Files.Glob "resources/config/log/filebeat/filebeat.yml").AsConfig . | indent 2 }}
diff --git a/kubernetes/esr/templates/deployment.yaml b/kubernetes/esr/charts/esr-server/templates/deployment.yaml
similarity index 77%
rename from kubernetes/esr/templates/deployment.yaml
rename to kubernetes/esr/charts/esr-server/templates/deployment.yaml
index 3cb568a..486d67b 100644
--- a/kubernetes/esr/templates/deployment.yaml
+++ b/kubernetes/esr/charts/esr-server/templates/deployment.yaml
@@ -59,7 +59,7 @@
name: localtime
readOnly: true
- mountPath: /home/esr/works/logs
- name: esr-server-logs
+ name: {{ include "common.fullname" . }}-logs
resources:
{{ toYaml .Values.resources | indent 12 }}
{{- if .Values.nodeSelector }}
@@ -70,31 +70,34 @@
affinity:
{{ toYaml .Values.affinity | indent 10 }}
{{- end }}
- # side car containers
- - name: filebeat-onap
+ # Filebeat sidecar container
+ - name: {{ include "common.name" . }}-filebeat-onap
image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
volumeMounts:
- - mountPath: /usr/share/filebeat/filebeat.yml
- name: filebeat-conf
+ - name: {{ include "common.fullname" . }}-filebeat-conf
+ mountPath: /usr/share/filebeat/filebeat.yml
subPath: filebeat.yml
- - mountPath: /home/esr/works/logs
- name: esr-server-logs
- - mountPath: /usr/share/filebeat/data
- name: esr-server-filebeat
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ mountPath: /usr/share/filebeat/data
+ - name: {{ include "common.fullname" . }}-logs
+ mountPath: /var/log/onap/esr/esr-server
+ - mountPath: /opt/ajsc/etc/config/logback.xml
+ name: {{ include "common.fullname" . }}-log-conf
+ subPath: logback.xml
volumes:
- name: localtime
hostPath:
path: /etc/localtime
- - name: filebeat-conf
+ - name: {{ include "common.fullname" . }}-log-conf
configMap:
- name: {{ include "common.fullname" . }}-esr-filebeat
- - name: esr-server-logs
- emptyDir: {}
- - name: esr-server-filebeat
- emptyDir: {}
- - name: esrserver-log
+ name: {{ include "common.fullname" . }}-log
+ - name: {{ include "common.fullname" . }}-filebeat-conf
configMap:
- name: {{ include "common.fullname" . }}-esr-esrserver-log
+ name: {{ include "common.fullname" . }}-esr-filebeat-configmap
+ - name: {{ include "common.fullname" . }}-data-filebeat
+ emptyDir: {}
+ - name: {{ include "common.fullname" . }}-logs
+ emptyDir: {}
imagePullSecrets:
- name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/esr/templates/service.yaml b/kubernetes/esr/charts/esr-server/templates/service.yaml
similarity index 70%
rename from kubernetes/esr/templates/service.yaml
rename to kubernetes/esr/charts/esr-server/templates/service.yaml
index dfa1ef0..d3198f4 100644
--- a/kubernetes/esr/templates/service.yaml
+++ b/kubernetes/esr/charts/esr-server/templates/service.yaml
@@ -16,7 +16,7 @@
apiVersion: v1
kind: Service
metadata:
- name: {{ .Values.service.name }}
+ name: {{ include "common.servicename" . }}
namespace: {{ include "common.namespace" . }}
labels:
app: {{ include "common.name" . }}
@@ -36,9 +36,18 @@
}
]'
spec:
+ type: {{ .Values.service.type }}
ports:
- - port: {{ .Values.service.internalPort }}
- name: {{ .Values.service.name }}
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
selector:
app: {{ include "common.name" . }}
- release: {{ .Release.Name }}
+ release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/esr/charts/esr-server/values.yaml b/kubernetes/esr/charts/esr-server/values.yaml
new file mode 100644
index 0000000..8f66148
--- /dev/null
+++ b/kubernetes/esr/charts/esr-server/values.yaml
@@ -0,0 +1,85 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+subChartsOnly:
+ enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/aai/esr-server:1.1.0
+pullPolicy: Always
+msbaddr: msb-iag.{{ include "common.namespace" . }}:80
+
+# application configuration
+config:
+ logstashServiceName: log-ls
+ logstashPort: 5044
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: ClusterIP
+ name: esr-server
+ portName: esr-server
+ externalPort: 9518
+ internalPort: 9518
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/esr/values.yaml b/kubernetes/esr/values.yaml
index 8f0ab5e..bd12358 100644
--- a/kubernetes/esr/values.yaml
+++ b/kubernetes/esr/values.yaml
@@ -17,67 +17,10 @@
# Global configuration defaults.
#################################################################
global:
- nodePortPrefix: 302
- readinessRepository: oomk8s
- readinessImage: readiness-check:2.0.0
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
-subChartsOnly:
- enabled: true
-
-# application image
-repository: nexus3.onap.org:10001
-image: onap/aai/esr-server:1.1.0
-pullPolicy: Always
-msbaddr: msb-iag.{{ include "common.namespace" . }}:80
-
# application configuration
config:
logstashServiceName: log-ls
- logstashPort: 5044
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
- initialDelaySeconds: 10
- periodSeconds: 10
- # necessary to disable liveness probe when setting breakpoints
- # in debugger so K8s doesn't restart unresponsive container
- enabled: true
-
-readiness:
- initialDelaySeconds: 10
- periodSeconds: 10
-
-service:
- name: esr
- internalPort: 9518
-
-ingress:
- enabled: false
-
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+ logstashPort: 5044
\ No newline at end of file