Vid Standardization Config
Issue-ID: OOM-729
Change-Id: Ic5b082e2d87ca7ef7944cd1ccce635ea2309e1f5
Signed-off-by: Priyanka <Priyanka.Jain3@amdocs.com>
diff --git a/kubernetes/vid/templates/NOTES.txt b/kubernetes/vid/templates/NOTES.txt
new file mode 100644
index 0000000..6e0b9fc
--- /dev/null
+++ b/kubernetes/vid/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ .Chart.Name }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/vid/templates/all-services.yaml b/kubernetes/vid/templates/all-services.yaml
deleted file mode 100644
index a946a2a..0000000
--- a/kubernetes/vid/templates/all-services.yaml
+++ /dev/null
@@ -1,46 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: v1
-kind: Service
-metadata:
- name: vid-mariadb
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- ports:
- - name: vid-mariadb
- port: 3306
- selector:
- app: vid-mariadb
- clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableVidVidServer }}
----
-apiVersion: v1
-kind: Service
-metadata:
- labels:
- app: vid-server
- name: vid-server
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- ports:
- - name: vid-server
- nodePort: {{ .Values.nodePortPrefix }}00
- port: 8080
- selector:
- app: vid-server
- type: NodePort
-#{{ end }}
\ No newline at end of file
diff --git a/kubernetes/vid/templates/vid-log-configmap.yaml b/kubernetes/vid/templates/configmap.yaml
similarity index 79%
rename from kubernetes/vid/templates/vid-log-configmap.yaml
rename to kubernetes/vid/templates/configmap.yaml
index 3a72866..f7dbf07 100644
--- a/kubernetes/vid/templates/vid-log-configmap.yaml
+++ b/kubernetes/vid/templates/configmap.yaml
@@ -12,20 +12,18 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-#{{ if not .Values.disableVidVidServer }}
apiVersion: v1
kind: ConfigMap
metadata:
- name: vid-log-configmap
- namespace: {{ .Values.nsPrefix }}
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/log/vid/*").AsConfig . | indent 2 }}
---
apiVersion: v1
kind: ConfigMap
metadata:
- name: vid-filebeat-configmap
- namespace: {{ .Values.nsPrefix }}
+ name: {{ include "common.fullname" . }}-filebeat-configmap
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
-#{{ end }}
diff --git a/kubernetes/vid/templates/deployment.yaml b/kubernetes/vid/templates/deployment.yaml
new file mode 100644
index 0000000..89ed734
--- /dev/null
+++ b/kubernetes/vid/templates/deployment.yaml
@@ -0,0 +1,162 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.mariadb.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ lifecycle:
+ postStart:
+ exec:
+ command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/usr/local/tomcat/webapps/vid/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: ASDC_CLIENT_REST_HOST
+ value: sdc-be.{{ include "common.namespace" . }}-sdc
+ - name: ASDC_CLIENT_REST_AUTH
+ value: "{{ .Values.config.asdcclientrestauth }}"
+ - name: ASDC_CLIENT_REST_PORT
+ value: "{{ .Values.config.asdcclientrestport }}"
+ - name: VID_AAI_HOST
+ value: aai-service.{{ include "common.namespace" . }}-aai
+ - name: VID_AAI_PORT
+ value: "{{ .Values.config.vidaaiport }}"
+ - name: VID_ECOMP_SHARED_CONTEXT_REST_URL
+ value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/context
+ - name: VID_MSO_SERVER_URL
+ value: http://mso.{{ include "common.namespace" . }}-mso:"{{ .Values.config.msoport }}"
+ - name: VID_MSO_PASS
+ value: "{{ .Values.config.vidmsopass }}"
+ - name: MSO_DME2_SERVER_URL
+ value: "{{ .Values.config.msodme2serverurl }}"
+ - name: MSO_DME2_ENABLED
+ value: {{ .Values.global.debugEnabled | default .Values.debugEnabled | quote }}
+ - name: VID_ECOMP_REDIRECT_URL
+ value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/login.h\tm
+ - name: VID_ECOMP_REST_URL
+ value: http://portalapps.{{ include "common.namespace" . }}-portal:"{{ .Values.config.onapport }}"/ONAPPORTAL/auxapi
+ - name: VID_CONTACT_US_LINK
+ value: "{{ .Values.config.vidcontactuslink }}"
+ - name: VID_UEB_URL_LIST
+ value: dmaap.{{ include "common.namespace" . }}-message-router
+ - name: VID_MYSQL_HOST
+ value: "{{ .Values.config.vidmysqlhost }}"
+ - name: VID_MYSQL_PORT
+ value: "{{ .Values.config.vidmysqlport }}"
+ - name: VID_MYSQL_DBNAME
+ value: "{{ .Values.config.vidmysqldbname }}"
+ - name: VID_MYSQL_USER
+ value: "{{ .Values.config.vidmysqluser }}"
+ - name: VID_MYSQL_PASS
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}
+ key: vid-password
+ - name: VID_MYSQL_MAXCONNECTIONS
+ value: "{{ .Values.config.vidmysqlmaxconnections }}"
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /var/log/onap
+ name: vid-logs
+ - mountPath: /tmp/logback.xml
+ name: vid-logback
+ subPath: logback.xml
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ # side car containers
+ - name: filebeat-onap
+ image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ name: filebeat-conf
+ subPath: filebeat.yml
+ - mountPath: /var/log/onap
+ name: vid-logs
+ - mountPath: /usr/share/filebeat/data
+ name: vid-data-filebeat
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: filebeat-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-filebeat-configmap
+ - name: vid-logs
+ emptyDir: {}
+ - name: vid-data-filebeat
+ emptyDir: {}
+ - name: vid-logback
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/vid/templates/vid-lfconfig-configmap.yaml b/kubernetes/vid/templates/secrets.yaml
similarity index 62%
rename from kubernetes/vid/templates/vid-lfconfig-configmap.yaml
rename to kubernetes/vid/templates/secrets.yaml
index 2809705..729e0b1 100644
--- a/kubernetes/vid/templates/vid-lfconfig-configmap.yaml
+++ b/kubernetes/vid/templates/secrets.yaml
@@ -12,12 +12,16 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-#{{ if not .Values.disableVidVidMariadb }}
apiVersion: v1
-kind: ConfigMap
+kind: Secret
metadata:
- name: vid-lfconfig-configmap
- namespace: {{ .Values.nsPrefix }}
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+type: Opaque
data:
-{{ tpl (.Files.Glob "resources/config/lf_config/*").AsConfig . | indent 2 }}
-#{{ end }}
+ vid-password: {{ .Values.config.vidmysqlpassword | b64enc | quote }}
diff --git a/kubernetes/vid/templates/service.yaml b/kubernetes/vid/templates/service.yaml
new file mode 100644
index 0000000..3969d21
--- /dev/null
+++ b/kubernetes/vid/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/vid/templates/vid-mariadb-deployment.yaml b/kubernetes/vid/templates/vid-mariadb-deployment.yaml
deleted file mode 100644
index 4eb46c2..0000000
--- a/kubernetes/vid/templates/vid-mariadb-deployment.yaml
+++ /dev/null
@@ -1,84 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: vid-mariadb
- name: vid-mariadb
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.vidMariaDbReplicas }}
- selector:
- matchLabels:
- app: vid-mariadb
- template:
- metadata:
- labels:
- app: vid-mariadb
- name: vid-mariadb
- spec:
- containers:
- - image: {{ .Values.image.mariadb }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: vid-mariadb
- env:
- - name: MYSQL_DATABASE
- value: vid_openecomp_epsdk
- - name: MYSQL_USER
- value: vidadmin
- - name: MYSQL_PASSWORD
- value: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
- - name: MYSQL_ROOT_PASSWORD
- value: LF+tp_1WqgSY
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /var/lib/mysql
- name: vid-mariadb-data
- - mountPath: /docker-entrypoint-initdb.d/vid-pre-init.sql
- name: vid-lfconfig
- subPath: vid-pre-init.sql
- - mountPath: /etc/mysql/my.cnf
- name: vid-lfconfig
- subPath: my.cnf
- ports:
- - containerPort: 3306
- readinessProbe:
- tcpSocket:
- port: 3306
- initialDelaySeconds: 5
- periodSeconds: 10
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: vid-mariadb-data
- persistentVolumeClaim:
- claimName: vid-db
- - name: vid-lfconfig
- configMap:
- name: vid-lfconfig-configmap
- defaultMode: 0755
- items:
- - key: vid-my.cnf
- path: my.cnf
- - key: vid-pre-init.sql
- path: vid-pre-init.sql
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}
diff --git a/kubernetes/vid/templates/vid-pv-pvc.yaml b/kubernetes/vid/templates/vid-pv-pvc.yaml
deleted file mode 100644
index 4d8db67..0000000
--- a/kubernetes/vid/templates/vid-pv-pvc.yaml
+++ /dev/null
@@ -1,48 +0,0 @@
-{{/*
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-#{{ if not .Values.disableVidVidMariadb }}
-apiVersion: v1
-kind: PersistentVolume
-metadata:
- name: "{{ .Values.nsPrefix }}-vid"
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- name: "{{ .Values.nsPrefix }}-vid"
-spec:
- capacity:
- storage: 2Gi
- accessModes:
- - ReadWriteMany
- persistentVolumeReclaimPolicy: Retain
- hostPath:
- path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/vid/mariadb/data
----
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
- name: vid-db
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- accessModes:
- - ReadWriteMany
- resources:
- requests:
- storage: 2Gi
- selector:
- matchLabels:
- name: "{{ .Values.nsPrefix }}-vid"
-#{{ end }}
diff --git a/kubernetes/vid/templates/vid-server-deployment.yaml b/kubernetes/vid/templates/vid-server-deployment.yaml
deleted file mode 100644
index 7903fb0..0000000
--- a/kubernetes/vid/templates/vid-server-deployment.yaml
+++ /dev/null
@@ -1,141 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#{{ if not .Values.disableVidVidServer }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: vid-server
- name: vid-server
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.vidServerReplicas }}
- selector:
- matchLabels:
- app: vid-server
- template:
- metadata:
- labels:
- app: vid-server
- name: vid-server
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - vid-mariadb
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: vid-server-readiness
- containers:
- - env:
- - name: ASDC_CLIENT_REST_HOST
- value: sdc-be.{{ .Values.nsPrefix }}
- - name: ASDC_CLIENT_REST_AUTH
- value: Basic dmlkOktwOGJKNFNYc3pNMFdYbGhhazNlSGxjc2UyZ0F3ODR2YW9HR21KdlV5MlU=
- - name: ASDC_CLIENT_REST_PORT
- value: "8080"
- - name: VID_AAI_HOST
- value: aai-service.{{ .Values.nsPrefix }}
- - name: VID_AAI_PORT
- value: "8443"
- - name: VID_ECOMP_SHARED_CONTEXT_REST_URL
- value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/context
- - name: VID_MSO_SERVER_URL
- value: http://mso.{{ .Values.nsPrefix }}:8080
- - name: VID_MSO_PASS
- value: OBF:1ih71i271vny1yf41ymf1ylz1yf21vn41hzj1icz
- - name: MSO_DME2_SERVER_URL
- value: http://localhost:8081
- - name: MSO_DME2_ENABLED
- value: "false"
- - name: VID_ECOMP_REDIRECT_URL
- value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/login.htm
- - name: VID_ECOMP_REST_URL
- value: http://portalapps.{{ .Values.nsPrefix }}:8989/ONAPPORTAL/auxapi
- - name: VID_CONTACT_US_LINK
- value: https://todo_contact_us_link.com
- - name: VID_UEB_URL_LIST
- value: dmaap.{{ .Values.nsPrefix }}
- - name: VID_MYSQL_HOST
- value: vid-mariadb
- - name: VID_MYSQL_PORT
- value: "3306"
- - name: VID_MYSQL_DBNAME
- value: vid_openecomp_epsdk
- - name: VID_MYSQL_USER
- value: vidadmin
- - name: VID_MYSQL_PASS
- value: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U
- - name: VID_MYSQL_MAXCONNECTIONS
- value: "5"
- image: {{ .Values.image.vid }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: vid-server
- lifecycle:
- postStart:
- exec:
- command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/usr/local/tomcat/webapps/vid/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
- ports:
- - containerPort: 8080
- volumeMounts:
- - mountPath: /etc/localtime
- name: localtime
- readOnly: true
- - mountPath: /var/log/onap
- name: vid-logs
- - mountPath: /tmp/logback.xml
- name: vid-logback
- subPath: logback.xml
- readinessProbe:
- tcpSocket:
- port: 8080
- initialDelaySeconds: 5
- periodSeconds: 10
- - image: {{ .Values.image.filebeat }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: filebeat-onap
- volumeMounts:
- - mountPath: /usr/share/filebeat/filebeat.yml
- name: filebeat-conf
- subPath: filebeat.yml
- - mountPath: /var/log/onap
- name: vid-logs
- - mountPath: /usr/share/filebeat/data
- name: vid-data-filebeat
- volumes:
- - name: localtime
- hostPath:
- path: /etc/localtime
- - name: filebeat-conf
- configMap:
- name: vid-filebeat-configmap
- - name: vid-logs
- emptyDir: {}
- - name: vid-data-filebeat
- emptyDir: {}
- - name: vid-logback
- configMap:
- name: vid-log-configmap
- imagePullSecrets:
- - name: "{{ .Values.nsPrefix }}-docker-registry-key"
-#{{ end }}