diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml
index 0f52182..1cd5cb4 100644
--- a/kubernetes/aaf/charts/aaf-cm/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cm/values.yaml
@@ -19,7 +19,7 @@
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-  
+
 #################################################################
 # Application configuration defaults.
 #################################################################
diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml
index 2131e85..83eaf15 100644
--- a/kubernetes/aaf/charts/aaf-cs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/values.yaml
@@ -60,7 +60,7 @@
   internalPort: 7000
   #port
   externalPort: 7000
-  
+
   internalPort2: 7001
   externalPort2: 7001
   internalPort3: 9042
diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml
index 74fdc68..f484883 100644
--- a/kubernetes/aaf/charts/aaf-fs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-fs/values.yaml
@@ -19,7 +19,7 @@
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-  
+
 #################################################################
 # Application configuration defaults.
 #################################################################
diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml
index 5a41bb3..27f59d1 100644
--- a/kubernetes/aaf/charts/aaf-hello/values.yaml
+++ b/kubernetes/aaf/charts/aaf-hello/values.yaml
@@ -19,7 +19,7 @@
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-  
+
 #################################################################
 # Application configuration defaults.
 #################################################################
diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml
index f31a2ca..86d67fc 100644
--- a/kubernetes/aaf/charts/aaf-locate/values.yaml
+++ b/kubernetes/aaf/charts/aaf-locate/values.yaml
@@ -19,7 +19,7 @@
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-  
+
 # If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
 #  persistence:
 #    mountPath: /dockerdata
diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml
index 6ac90e1..c349814 100644
--- a/kubernetes/aaf/charts/aaf-oauth/values.yaml
+++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml
@@ -19,7 +19,7 @@
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-  
+
 #################################################################
 # Application configuration defaults.
 #################################################################
diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml
index 19250d8..c8f0484 100644
--- a/kubernetes/aaf/values.yaml
+++ b/kubernetes/aaf/values.yaml
@@ -21,13 +21,13 @@
   readinessImage: readiness-check:2.0.0
   ubuntuInitRepository: registry.hub.docker.com
   ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
-  persistence: 
+  persistence:
     enabled: true
 
 #################################################################
 # Application configuration defaults.
 #################################################################
-config: 
+config:
   serviceServiceName: aaf-service
   locateServiceName: aaf-locate
   cmServiceName: aaf-cm
diff --git a/kubernetes/aai/charts/aai-babel/values.yaml b/kubernetes/aai/charts/aai-babel/values.yaml
index 01b4dfc..59c3366 100644
--- a/kubernetes/aai/charts/aai-babel/values.yaml
+++ b/kubernetes/aai/charts/aai-babel/values.yaml
@@ -78,3 +78,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-cassandra/values.yaml b/kubernetes/aai/charts/aai-cassandra/values.yaml
index 22055d6..1e1d2c1 100644
--- a/kubernetes/aai/charts/aai-cassandra/values.yaml
+++ b/kubernetes/aai/charts/aai-cassandra/values.yaml
@@ -100,7 +100,7 @@
   storageType: local
   storageClass: ""
 
-  
+
 resources: {}
   # We usually recommend not to specify default resources and to leave this as a conscious
   # choice for the user. This also increases chances charts run on environments with little
diff --git a/kubernetes/aai/charts/aai-champ/values.yaml b/kubernetes/aai/charts/aai-champ/values.yaml
index 75ecffb..9e1c9bd 100644
--- a/kubernetes/aai/charts/aai-champ/values.yaml
+++ b/kubernetes/aai/charts/aai-champ/values.yaml
@@ -77,6 +77,7 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
 
 # XML beans configuration
 event:
diff --git a/kubernetes/aai/charts/aai-data-router/values.yaml b/kubernetes/aai/charts/aai-data-router/values.yaml
index 06c64c3..ba42582 100644
--- a/kubernetes/aai/charts/aai-data-router/values.yaml
+++ b/kubernetes/aai/charts/aai-data-router/values.yaml
@@ -82,23 +82,6 @@
   mountPath: /dockerdata-nfs
   mountSubPath: aai/data-router/logs
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
 resources:
   small:
     limits:
@@ -114,3 +97,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aai/charts/aai-elasticsearch/values.yaml b/kubernetes/aai/charts/aai-elasticsearch/values.yaml
index c6afbb5..a800c4e 100644
--- a/kubernetes/aai/charts/aai-elasticsearch/values.yaml
+++ b/kubernetes/aai/charts/aai-elasticsearch/values.yaml
@@ -80,23 +80,6 @@
   mountPath: /dockerdata-nfs
   mountSubPath: aai/elasticsearch/data
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
 resources:
   small:
     limits:
@@ -112,3 +95,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-gizmo/values.yaml b/kubernetes/aai/charts/aai-gizmo/values.yaml
index d34ff2b..6ad25c5 100644
--- a/kubernetes/aai/charts/aai-gizmo/values.yaml
+++ b/kubernetes/aai/charts/aai-gizmo/values.yaml
@@ -74,3 +74,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-graphadmin/values.yaml b/kubernetes/aai/charts/aai-graphadmin/values.yaml
index 3b7bd60..b7af3d0 100644
--- a/kubernetes/aai/charts/aai-graphadmin/values.yaml
+++ b/kubernetes/aai/charts/aai-graphadmin/values.yaml
@@ -44,10 +44,10 @@
     limit: 180000
 
   # Default maximum records to fix for the data grooming and dupeTool
-  maxFix: 
+  maxFix:
     dataGrooming: 150
     dupeTool: 25
-    
+
   # Default number of sleep minutes for dataGrooming and dupeTool
   sleepMinutes:
     dataGrooming: 7
@@ -107,23 +107,6 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
 resources:
   small:
     limits:
@@ -139,3 +122,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-modelloader/values.yaml b/kubernetes/aai/charts/aai-modelloader/values.yaml
index e406443..1617fc0 100644
--- a/kubernetes/aai/charts/aai-modelloader/values.yaml
+++ b/kubernetes/aai/charts/aai-modelloader/values.yaml
@@ -61,23 +61,7 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+
 resources:
   small:
     limits:
@@ -93,3 +77,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-resources/values.yaml b/kubernetes/aai/charts/aai-resources/values.yaml
index e9a0063..8e50ba0 100644
--- a/kubernetes/aai/charts/aai-resources/values.yaml
+++ b/kubernetes/aai/charts/aai-resources/values.yaml
@@ -35,10 +35,10 @@
   # Specifies crud related operation timeouts and overrides
   crud:
     timeout:
-      # Specifies if the timeout for REST GET calls should be enabled 
+      # Specifies if the timeout for REST GET calls should be enabled
       enabled: true
       # Specifies the timeout values for application specific
-      # Its a pipe seperated list where each element before comma represents 
+      # Its a pipe seperated list where each element before comma represents
       # the X-FromAppId and the comma after specifies the timeout limit in ms
       # If the timeout limit is -1 then it means for these apps no timeout
       appspecific: JUNITTESTAPP1,1|JUNITTESTAPP2,-1|DCAE-CCS,-1|DCAES,-1|AAIRctFeed,-1|NewvceCreator,-1|IANewvceCreator,-1|AAI-CSIOVALS,-1
@@ -111,3 +111,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-search-data/values.yaml b/kubernetes/aai/charts/aai-search-data/values.yaml
index bfde398..b58350c 100644
--- a/kubernetes/aai/charts/aai-search-data/values.yaml
+++ b/kubernetes/aai/charts/aai-search-data/values.yaml
@@ -61,23 +61,6 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
 resources:
   small:
     limits:
@@ -93,3 +76,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-sparky-be/values.yaml b/kubernetes/aai/charts/aai-sparky-be/values.yaml
index 47b5a1d..a323d29 100644
--- a/kubernetes/aai/charts/aai-sparky-be/values.yaml
+++ b/kubernetes/aai/charts/aai-sparky-be/values.yaml
@@ -82,23 +82,8 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+# ref: http://kubernetes.io/docs/user-guide/compute-resources/
 resources:
   small:
     limits:
@@ -114,3 +99,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/charts/aai-spike/values.yaml b/kubernetes/aai/charts/aai-spike/values.yaml
index 4fc3a0b..af59f9a 100644
--- a/kubernetes/aai/charts/aai-spike/values.yaml
+++ b/kubernetes/aai/charts/aai-spike/values.yaml
@@ -75,6 +75,7 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
 
 # XML bean configuration
 event:
diff --git a/kubernetes/aai/charts/aai-traversal/values.yaml b/kubernetes/aai/charts/aai-traversal/values.yaml
index 83bd1a9..4e65125 100644
--- a/kubernetes/aai/charts/aai-traversal/values.yaml
+++ b/kubernetes/aai/charts/aai-traversal/values.yaml
@@ -75,23 +75,8 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+# ref: http://kubernetes.io/docs/user-guide/compute-resources/
 resources:
   small:
     limits:
@@ -107,3 +92,4 @@
     requests:
       cpu: 4
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/aai/values.yaml b/kubernetes/aai/values.yaml
index 2345b3f..bf1602e 100644
--- a/kubernetes/aai/values.yaml
+++ b/kubernetes/aai/values.yaml
@@ -242,16 +242,6 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
 resources:
   small:
     limits:
@@ -267,3 +257,4 @@
     requests:
       cpu: 2
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/appc/charts/appc-ansible-server/values.yaml b/kubernetes/appc/charts/appc-ansible-server/values.yaml
index 0d4a460..d971192 100644
--- a/kubernetes/appc/charts/appc-ansible-server/values.yaml
+++ b/kubernetes/appc/charts/appc-ansible-server/values.yaml
@@ -85,5 +85,6 @@
     requests:
       cpu: 1
       memory: 1Gi
+  unlimited: {}
 
 
diff --git a/kubernetes/appc/charts/appc-cdt/values.yaml b/kubernetes/appc/charts/appc-cdt/values.yaml
index 125241d..8818870 100644
--- a/kubernetes/appc/charts/appc-cdt/values.yaml
+++ b/kubernetes/appc/charts/appc-cdt/values.yaml
@@ -61,16 +61,8 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
+# Configure resource requests and limits
+# ref: http://kubernetes.io/docs/user-guide/compute-resources/
 resources:
   small:
     limits:
@@ -86,3 +78,4 @@
     requests:
       cpu: 1
       memory: 1Gi
+  unlimited: {}
diff --git a/kubernetes/appc/values.yaml b/kubernetes/appc/values.yaml
index 8661bf5..d6a2ddf 100644
--- a/kubernetes/appc/values.yaml
+++ b/kubernetes/appc/values.yaml
@@ -156,16 +156,8 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
+# Configure resource requests and limits
+# ref: http://kubernetes.io/docs/user-guide/compute-resources/
 resources:
   small:
     limits:
@@ -181,3 +173,4 @@
     requests:
       cpu: 2
       memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml
index cac222e..1c32d39 100644
--- a/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml
+++ b/kubernetes/clamp/charts/clamp-dash-kibana/values.yaml
@@ -95,7 +95,7 @@
 resources:
   limits:
     cpu: 1
-    memory: 2Gi 
+    memory: 2Gi
   requests:
     cpu: 10m
     memory: 750Mi
diff --git a/kubernetes/clamp/charts/mariadb/values.yaml b/kubernetes/clamp/charts/mariadb/values.yaml
index 3b09d9a..a419f11 100644
--- a/kubernetes/clamp/charts/mariadb/values.yaml
+++ b/kubernetes/clamp/charts/mariadb/values.yaml
@@ -46,7 +46,7 @@
   # necessary to disable liveness probe when setting breakpoints
   # in debugger so K8s doesn't restart unresponsive container
   enabled: true
- 
+
 readiness:
   initialDelaySeconds: 10
   periodSeconds: 10
diff --git a/kubernetes/clamp/values.yaml b/kubernetes/clamp/values.yaml
index 9c6fa51..4dd47a0 100644
--- a/kubernetes/clamp/values.yaml
+++ b/kubernetes/clamp/values.yaml
@@ -99,7 +99,7 @@
   # as of 20180904 port 58 is reserved for clamp from log/logdemonode
   # see https://wiki.onap.org/display/DW/OOM+NodePort+List
   nodePort2: 58
- 
+
 
 ingress:
   enabled: false
diff --git a/kubernetes/cli/values.yaml b/kubernetes/cli/values.yaml
index 134981c..1c511a3 100644
--- a/kubernetes/cli/values.yaml
+++ b/kubernetes/cli/values.yaml
@@ -64,16 +64,8 @@
 ingress:
   enabled: false
 
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
+# Configure resource requests and limits
+# ref: http://kubernetes.io/docs/user-guide/compute-resources/
 resources:
   small:
     limits:
@@ -89,3 +81,4 @@
     requests:
       cpu: 2
       memory: 4Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/common/mysql/values.yaml b/kubernetes/common/mysql/values.yaml
index 6805aa5..9fd67fc 100644
--- a/kubernetes/common/mysql/values.yaml
+++ b/kubernetes/common/mysql/values.yaml
@@ -59,7 +59,7 @@
 ## Persist data to a persitent volume
 persistence:
   enabled: true
-  
+
   ## A manually managed Persistent Volume and Claim
   ## Requires persistence.enabled: true
   ## If defined, PVC must be created manually before volume will be bound
@@ -103,8 +103,8 @@
   # Example:
   # Configure resource requests and limits
   # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory 
-  # Minimum memory for production is 4 CPU cores and 8GB memory 
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
 #resources:
 #  limits:
 #    cpu: 2
diff --git a/kubernetes/common/network-name-gen/values.yaml b/kubernetes/common/network-name-gen/values.yaml
index c992bea..b40ac91 100644
--- a/kubernetes/common/network-name-gen/values.yaml
+++ b/kubernetes/common/network-name-gen/values.yaml
@@ -1,102 +1,102 @@
-# Copyright (C) 2018  AT&T Intellectual Property.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Global configuration default values that can be inherited by
-# all subcharts.
-#################################################################
-global:
-
-  # Change to an unused port prefix range to prevent port conflicts
-  # with other instances running within the same k8s cluster
-  nodePortPrefix: 302
-
-  # image repositories
-  repository: nexus3.onap.org:10001
-
-
-  # readiness check
-  readinessRepository: oomk8s
-  readinessImage: readiness-check:2.0.0
-
-  # image pull policy
-  pullPolicy: IfNotPresent
-
-# sub-chart config
-mariadb-galera:
-  config:
-      userName: nenguser
-      userPassword: nenguser123
-      mariadbRootPassword: nenguser123
-      mysqlDatabase: nengdb
-  nameOverride: nengdb
-  service:
-    name: nengdb
-    portName: nengdbport
-  replicaCount: 1
-  persistence:
-    enabled: true
-    mountSubPath: network-name-gen/data
-
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image: onap/ccsdk-apps-ms-neng:latest
-pullPolicy: IfNotPresent
-
-# application configuration
-config:
-  dbUrl: jdbc:mysql://nengdb:3306/nengdb
-  springProfile: live
-  polClientAuth: TBD
-  polBasicAuth: TBD
-  polUrl: TBD
-  polEnv: TEST
-  polReqId: xx
-  aaiCertPass: TBD
-  aaiCertPath: TBD
-  aaiUri: TBD
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: false
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-service:
-  type: ClusterIP
-  name: neng-serv
-  portName: neng-serv-port
-  internalPort: 8080
-  externalPort: 8080
-
-ingress:
-  enabled: false
-
-resources: {}
+# Copyright (C) 2018  AT&T Intellectual Property.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Global configuration default values that can be inherited by
+# all subcharts.
+#################################################################
+global:
+
+  # Change to an unused port prefix range to prevent port conflicts
+  # with other instances running within the same k8s cluster
+  nodePortPrefix: 302
+
+  # image repositories
+  repository: nexus3.onap.org:10001
+
+
+  # readiness check
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+
+  # image pull policy
+  pullPolicy: IfNotPresent
+
+# sub-chart config
+mariadb-galera:
+  config:
+      userName: nenguser
+      userPassword: nenguser123
+      mariadbRootPassword: nenguser123
+      mysqlDatabase: nengdb
+  nameOverride: nengdb
+  service:
+    name: nengdb
+    portName: nengdbport
+  replicaCount: 1
+  persistence:
+    enabled: true
+    mountSubPath: network-name-gen/data
+
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/ccsdk-apps-ms-neng:latest
+pullPolicy: IfNotPresent
+
+# application configuration
+config:
+  dbUrl: jdbc:mysql://nengdb:3306/nengdb
+  springProfile: live
+  polClientAuth: TBD
+  polBasicAuth: TBD
+  polUrl: TBD
+  polEnv: TEST
+  polReqId: xx
+  aaiCertPass: TBD
+  aaiCertPath: TBD
+  aaiUri: TBD
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: false
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  type: ClusterIP
+  name: neng-serv
+  portName: neng-serv-port
+  internalPort: 8080
+  externalPort: 8080
+
+ingress:
+  enabled: false
+
+resources: {}
diff --git a/kubernetes/common/postgres/values.yaml b/kubernetes/common/postgres/values.yaml
index 28ee64b..8dd5d0a 100644
--- a/kubernetes/common/postgres/values.yaml
+++ b/kubernetes/common/postgres/values.yaml
@@ -55,10 +55,10 @@
   credentials:
     pgusername: testuser
     pgpassword: password
-  service: 
-    name: pgpool 
+  service:
+    name: pgpool
 
- 
+
 # default number of instances
 replicaCount: 2
 
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
index ff6b254..fd3305c 100644
--- a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
@@ -25,13 +25,13 @@
   readinessImage: readiness-check:2.0.0
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
- 
+
 service:
   name: dcae-healthcheck
   internalPort: 80
   externalPort: 80
   type: ClusterIP
- 
+
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml
index cf61c49..26a37d5 100644
--- a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml
@@ -68,8 +68,8 @@
   # Example:
   # Configure resource requests and limits
   # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory 
-  # Minimum memory for production is 4 CPU cores and 8GB memory 
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
 #resources:
 #  limits:
 #    cpu: 2
diff --git a/kubernetes/log/charts/log-elasticsearch/values.yaml b/kubernetes/log/charts/log-elasticsearch/values.yaml
index 3a621f9..9c3525a 100644
--- a/kubernetes/log/charts/log-elasticsearch/values.yaml
+++ b/kubernetes/log/charts/log-elasticsearch/values.yaml
@@ -95,7 +95,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -112,4 +112,5 @@
       memory: 8Gi
     requests:
       cpu: 1
-      memory: 4Gi
\ No newline at end of file
+      memory: 4Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/log/charts/log-kibana/values.yaml b/kubernetes/log/charts/log-kibana/values.yaml
index 81d0241..8a56151 100644
--- a/kubernetes/log/charts/log-kibana/values.yaml
+++ b/kubernetes/log/charts/log-kibana/values.yaml
@@ -76,7 +76,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -93,4 +93,5 @@
       memory: 8Gi
     requests:
       cpu: 2
-      memory: 4Gi
\ No newline at end of file
+      memory: 4Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/log/charts/log-logstash/values.yaml b/kubernetes/log/charts/log-logstash/values.yaml
index ce227d9..7779ffe 100644
--- a/kubernetes/log/charts/log-logstash/values.yaml
+++ b/kubernetes/log/charts/log-logstash/values.yaml
@@ -73,7 +73,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -90,4 +90,5 @@
       memory: 4Gi
     requests:
       cpu: 2
-      memory: 4Gi
\ No newline at end of file
+      memory: 4Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
index e6486a2..699b908 100644
--- a/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-ocata/values.yaml
@@ -84,3 +84,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/multicloud/charts/multicloud-vio/values.yaml b/kubernetes/multicloud/charts/multicloud-vio/values.yaml
index bc207ef..810646d 100644
--- a/kubernetes/multicloud/charts/multicloud-vio/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-vio/values.yaml
@@ -28,7 +28,7 @@
 pullPolicy: Always
 
 #Istio sidecar injection policy
-istioSidecar: true 
+istioSidecar: true
 
 # application configuration
 config:
@@ -84,3 +84,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
index 91d2d2e..4ebf843 100644
--- a/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
+++ b/kubernetes/multicloud/charts/multicloud-windriver/values.yaml
@@ -84,3 +84,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/multicloud/values.yaml b/kubernetes/multicloud/values.yaml
index f7a3db3..3f1da7e 100644
--- a/kubernetes/multicloud/values.yaml
+++ b/kubernetes/multicloud/values.yaml
@@ -88,3 +88,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/nbi/charts/mariadb/values.yaml b/kubernetes/nbi/charts/mariadb/values.yaml
index 525c6a1..dd93b92 100644
--- a/kubernetes/nbi/charts/mariadb/values.yaml
+++ b/kubernetes/nbi/charts/mariadb/values.yaml
@@ -92,4 +92,4 @@
     requests:
       cpu: 2
       memory: 4Gi
-
+  unlimited: {}
diff --git a/kubernetes/nbi/values.yaml b/kubernetes/nbi/values.yaml
index 9f9c0fa..703398d 100644
--- a/kubernetes/nbi/values.yaml
+++ b/kubernetes/nbi/values.yaml
@@ -120,4 +120,5 @@
       memory: 4Gi
     requests:
       cpu: 200m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml
index ea83587..c1f18ef 100755
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-api/values.yaml
@@ -42,6 +42,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml
index 1268bad..38d2d18 100644
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-cassandra/values.yaml
@@ -56,6 +56,7 @@
     requests:
       memory: 16Gi
       cpu: 8000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml
index 659128d..0090742 100755
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-controller/values.yaml
@@ -35,6 +35,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml
index 659128d..0090742 100755
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-data/values.yaml
@@ -35,6 +35,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml
index dda1c0f..f848162 100644
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-music/values.yaml
@@ -66,6 +66,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml
index 659128d..0090742 100755
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-reservation/values.yaml
@@ -35,6 +35,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml
index 659128d..0090742 100755
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-solver/values.yaml
@@ -35,6 +35,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml
index e61eda0..64e0550 100644
--- a/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml
+++ b/kubernetes/oof/charts/oof-has/charts/oof-has-zookeeper/values.yaml
@@ -48,6 +48,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/oof/values.yaml b/kubernetes/oof/values.yaml
index 5aa462f..c249f26 100644
--- a/kubernetes/oof/values.yaml
+++ b/kubernetes/oof/values.yaml
@@ -93,6 +93,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 # probe configuration parameters
 liveness:
   initialDelaySeconds: 10
diff --git a/kubernetes/policy/charts/brmsgw/values.yaml b/kubernetes/policy/charts/brmsgw/values.yaml
index 4028356..32059d6 100644
--- a/kubernetes/policy/charts/brmsgw/values.yaml
+++ b/kubernetes/policy/charts/brmsgw/values.yaml
@@ -85,4 +85,5 @@
       memory: 4Gi
     requests:
       cpu: 20m
-      memory: 1Gi
\ No newline at end of file
+      memory: 1Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/charts/drools/charts/nexus/values.yaml b/kubernetes/policy/charts/drools/charts/nexus/values.yaml
index 91089aa..e837baf 100644
--- a/kubernetes/policy/charts/drools/charts/nexus/values.yaml
+++ b/kubernetes/policy/charts/drools/charts/nexus/values.yaml
@@ -94,4 +94,5 @@
       memory: 2Gi
     requests:
       cpu: 2m
-      memory: 1Gi
\ No newline at end of file
+      memory: 1Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/charts/drools/values.yaml b/kubernetes/policy/charts/drools/values.yaml
index 0a05719..b4a848a 100644
--- a/kubernetes/policy/charts/drools/values.yaml
+++ b/kubernetes/policy/charts/drools/values.yaml
@@ -86,4 +86,5 @@
       memory: 8Gi
     requests:
       cpu: 200m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/charts/mariadb/values.yaml b/kubernetes/policy/charts/mariadb/values.yaml
index b2a848b..90f5be4 100644
--- a/kubernetes/policy/charts/mariadb/values.yaml
+++ b/kubernetes/policy/charts/mariadb/values.yaml
@@ -91,4 +91,5 @@
       memory: 4Gi
     requests:
       cpu: 20m
-      memory: 1Gi
\ No newline at end of file
+      memory: 1Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/charts/pdp/values.yaml b/kubernetes/policy/charts/pdp/values.yaml
index 45ab96d..6559b42 100644
--- a/kubernetes/policy/charts/pdp/values.yaml
+++ b/kubernetes/policy/charts/pdp/values.yaml
@@ -84,4 +84,5 @@
       memory: 8Gi
     requests:
       cpu: 20m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/charts/policy-apex-pdp/values.yaml b/kubernetes/policy/charts/policy-apex-pdp/values.yaml
index ef90c91..5d7a4d6 100644
--- a/kubernetes/policy/charts/policy-apex-pdp/values.yaml
+++ b/kubernetes/policy/charts/policy-apex-pdp/values.yaml
@@ -82,4 +82,5 @@
       memory: 8Gi
     requests:
       cpu: 20m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/policy/values.yaml b/kubernetes/policy/values.yaml
index 6583045..0813f4c 100644
--- a/kubernetes/policy/values.yaml
+++ b/kubernetes/policy/values.yaml
@@ -99,7 +99,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -116,4 +116,5 @@
       memory: 8Gi
     requests:
       cpu: 20m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/pomba/charts/pomba-networkdiscovery/values.yaml b/kubernetes/pomba/charts/pomba-networkdiscovery/values.yaml
index b65f3be..e10b6db 100644
--- a/kubernetes/pomba/charts/pomba-networkdiscovery/values.yaml
+++ b/kubernetes/pomba/charts/pomba-networkdiscovery/values.yaml
@@ -1,96 +1,96 @@
-# Copyright © 2018 Amdocs
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  repository: nexus3.onap.org:10001
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image:  onap/network-discovery:latest
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-# Example:
-config:
-  # Network Discovery Micro Service REST Client Configuration
-  # Basic Authorization credentials for Network Discovery Micro Service Rest Service
-  networkDiscoveryUserId: admin
-  networkDiscoveryPassword: OBF:1u2a1toa1w8v1tok1u30
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-#Example service definition with external, internal and node ports.
-service:
-  # The default service name (exposed in the service.yaml) will be the same
-  # name as the chart. If the service name needs to be overriden (such as
-  # when a subchart is shared), uncomment the value below.
-  #name: <service-name-override>
-
-  #Services may use any combination of ports depending on the 'type' of
-  #service being defined.
-  type: ClusterIP
-  externalPort: 9531
-  internalPort: 8080
-#  nodePort: <replace with unused node port suffix eg. 23>
-  # optional port name override - default can be defined in service.yaml
-  #portName: http
-
-ingress:
-  enabled: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image:  onap/network-discovery:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+  # Network Discovery Micro Service REST Client Configuration
+  # Basic Authorization credentials for Network Discovery Micro Service Rest Service
+  networkDiscoveryUserId: admin
+  networkDiscoveryPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+  # The default service name (exposed in the service.yaml) will be the same
+  # name as the chart. If the service name needs to be overriden (such as
+  # when a subchart is shared), uncomment the value below.
+  #name: <service-name-override>
+
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: ClusterIP
+  externalPort: 9531
+  internalPort: 8080
+#  nodePort: <replace with unused node port suffix eg. 23>
+  # optional port name override - default can be defined in service.yaml
+  #portName: http
+
+ingress:
+  enabled: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+#  limits:
+#    cpu: 2
+#    memory: 4Gi
+#  requests:
+#    cpu: 2
+#    memory: 4Gi
diff --git a/kubernetes/pomba/charts/pomba-servicedecomposition/values.yaml b/kubernetes/pomba/charts/pomba-servicedecomposition/values.yaml
index 3de087e..f43eea1 100644
--- a/kubernetes/pomba/charts/pomba-servicedecomposition/values.yaml
+++ b/kubernetes/pomba/charts/pomba-servicedecomposition/values.yaml
@@ -1,96 +1,96 @@
-# Copyright © 2018 Amdocs
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
-  nodePortPrefix: 302
-  repository: nexus3.onap.org:10001
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: nexus3.onap.org:10001
-image:  onap/service-decomposition:latest
-pullPolicy: Always
-
-# flag to enable debugging - application support required
-debugEnabled: false
-
-# application configuration
-# Example:
-config:
-  # Service Decomposition REST Client Configuration
-  # Basic Authorization Client credentials for Service Decomposition REST service
-  serviceDecompositionUserId: admin
-  serviceDecompositionPassword: OBF:1u2a1toa1w8v1tok1u30
-
-# default number of instances
-replicaCount: 1
-
-nodeSelector: {}
-
-affinity: {}
-
-# probe configuration parameters
-liveness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-  # necessary to disable liveness probe when setting breakpoints
-  # in debugger so K8s doesn't restart unresponsive container
-  enabled: true
-
-readiness:
-  initialDelaySeconds: 10
-  periodSeconds: 10
-
-#Example service definition with external, internal and node ports.
-service:
-  # The default service name (exposed in the service.yaml) will be the same
-  # name as the chart. If the service name needs to be overriden (such as
-  # when a subchart is shared), uncomment the value below.
-  #name: <service-name-override>
-
-  #Services may use any combination of ports depending on the 'type' of
-  #service being defined.
-  type: ClusterIP
-  externalPort: 9532
-  internalPort: 8080
-#  nodePort: <replace with unused node port suffix eg. 23>
-  # optional port name override - default can be defined in service.yaml
-  #portName: http
-
-ingress:
-  enabled: false
-
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Copyright © 2018 Amdocs
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repository: nexus3.onap.org:10001
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image:  onap/service-decomposition:latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config:
+  # Service Decomposition REST Client Configuration
+  # Basic Authorization Client credentials for Service Decomposition REST service
+  serviceDecompositionUserId: admin
+  serviceDecompositionPassword: OBF:1u2a1toa1w8v1tok1u30
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+#Example service definition with external, internal and node ports.
+service:
+  # The default service name (exposed in the service.yaml) will be the same
+  # name as the chart. If the service name needs to be overriden (such as
+  # when a subchart is shared), uncomment the value below.
+  #name: <service-name-override>
+
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: ClusterIP
+  externalPort: 9532
+  internalPort: 8080
+#  nodePort: <replace with unused node port suffix eg. 23>
+  # optional port name override - default can be defined in service.yaml
+  #portName: http
+
+ingress:
+  enabled: false
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+#  limits:
+#    cpu: 2
+#    memory: 4Gi
+#  requests:
+#    cpu: 2
+#    memory: 4Gi
diff --git a/kubernetes/portal/charts/portal-app/values.yaml b/kubernetes/portal/charts/portal-app/values.yaml
index c8aa81f..a71e0c4 100644
--- a/kubernetes/portal/charts/portal-app/values.yaml
+++ b/kubernetes/portal/charts/portal-app/values.yaml
@@ -86,7 +86,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -104,3 +104,4 @@
     requests:
       cpu: 2
       memory: 8Gi
+  unlimited: {}
diff --git a/kubernetes/portal/charts/portal-cassandra/values.yaml b/kubernetes/portal/charts/portal-cassandra/values.yaml
index 6c55391..c46ca42 100644
--- a/kubernetes/portal/charts/portal-cassandra/values.yaml
+++ b/kubernetes/portal/charts/portal-cassandra/values.yaml
@@ -73,7 +73,7 @@
   size: 2Gi
   mountPath: /dockerdata-nfs
   mountSubPath: portal/cassandra/data
-  
+
 service:
   type: ClusterIP
   name: portal-cassandra
@@ -92,7 +92,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -110,3 +110,4 @@
     requests:
       cpu: 2
       memory: 6Gi
+  unlimited: {}
diff --git a/kubernetes/portal/charts/portal-mariadb/values.yaml b/kubernetes/portal/charts/portal-mariadb/values.yaml
index 3085588..bd68f9a 100644
--- a/kubernetes/portal/charts/portal-mariadb/values.yaml
+++ b/kubernetes/portal/charts/portal-mariadb/values.yaml
@@ -121,7 +121,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -139,3 +139,4 @@
     requests:
       cpu: 800m
       memory: 1Gi
+  unlimited: {}
diff --git a/kubernetes/portal/charts/portal-sdk/values.yaml b/kubernetes/portal/charts/portal-sdk/values.yaml
index 22a0b2f..89d2e77 100644
--- a/kubernetes/portal/charts/portal-sdk/values.yaml
+++ b/kubernetes/portal/charts/portal-sdk/values.yaml
@@ -82,7 +82,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -100,3 +100,4 @@
     requests:
       cpu: 4
       memory: 10Gi
+  unlimited: {}
diff --git a/kubernetes/portal/charts/portal-widget/values.yaml b/kubernetes/portal/charts/portal-widget/values.yaml
index 5264938..0724653 100644
--- a/kubernetes/portal/charts/portal-widget/values.yaml
+++ b/kubernetes/portal/charts/portal-widget/values.yaml
@@ -68,7 +68,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -86,3 +86,4 @@
     requests:
       cpu: 1
       memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/portal/charts/portal-zookeeper/values.yaml b/kubernetes/portal/charts/portal-zookeeper/values.yaml
index b8e93c4..c7c8030 100644
--- a/kubernetes/portal/charts/portal-zookeeper/values.yaml
+++ b/kubernetes/portal/charts/portal-zookeeper/values.yaml
@@ -56,7 +56,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -74,3 +74,4 @@
     requests:
       cpu: 500m
       memory: 600Mi
+  unlimited: {}
diff --git a/kubernetes/robot/values.yaml b/kubernetes/robot/values.yaml
index 146c0be..4d320dd 100755
--- a/kubernetes/robot/values.yaml
+++ b/kubernetes/robot/values.yaml
@@ -84,7 +84,7 @@
 
 affinity: {}
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -102,6 +102,7 @@
     requests:
       cpu: 1000m
       memory: 2Gi
+  unlimited: {}
 
 # probe configuration parameters
 liveness:
diff --git a/kubernetes/sdc/charts/sdc-be/values.yaml b/kubernetes/sdc/charts/sdc-be/values.yaml
index 24c7140..f262525 100644
--- a/kubernetes/sdc/charts/sdc-be/values.yaml
+++ b/kubernetes/sdc/charts/sdc-be/values.yaml
@@ -88,3 +88,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-cs/values.yaml b/kubernetes/sdc/charts/sdc-cs/values.yaml
index c35617a..949b47f 100644
--- a/kubernetes/sdc/charts/sdc-cs/values.yaml
+++ b/kubernetes/sdc/charts/sdc-cs/values.yaml
@@ -111,3 +111,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-es/values.yaml b/kubernetes/sdc/charts/sdc-es/values.yaml
index f0beda9..763fa40 100644
--- a/kubernetes/sdc/charts/sdc-es/values.yaml
+++ b/kubernetes/sdc/charts/sdc-es/values.yaml
@@ -115,4 +115,5 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
 
diff --git a/kubernetes/sdc/charts/sdc-fe/values.yaml b/kubernetes/sdc/charts/sdc-fe/values.yaml
index 38efb27..df3d689 100644
--- a/kubernetes/sdc/charts/sdc-fe/values.yaml
+++ b/kubernetes/sdc/charts/sdc-fe/values.yaml
@@ -88,3 +88,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-kb/values.yaml b/kubernetes/sdc/charts/sdc-kb/values.yaml
index 15bb72c..541ab99 100644
--- a/kubernetes/sdc/charts/sdc-kb/values.yaml
+++ b/kubernetes/sdc/charts/sdc-kb/values.yaml
@@ -86,3 +86,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
diff --git a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml b/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml
index a1a1411..f5f7c3a 100644
--- a/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml
+++ b/kubernetes/sdc/charts/sdc-onboarding-be/values.yaml
@@ -111,3 +111,4 @@
     requests:
       cpu: 20m
       memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/sdnc/charts/dmaap-listener/values.yaml b/kubernetes/sdnc/charts/dmaap-listener/values.yaml
index 2520fb1..a0ac529 100644
--- a/kubernetes/sdnc/charts/dmaap-listener/values.yaml
+++ b/kubernetes/sdnc/charts/dmaap-listener/values.yaml
@@ -90,4 +90,5 @@
       memory: 4Gi
     requests:
       cpu: 1
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml
index 04eca00..d8e8287 100644
--- a/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml
+++ b/kubernetes/sdnc/charts/sdnc-ansible-server/values.yaml
@@ -89,3 +89,4 @@
     requests:
       cpu: 1
       memory: 1Gi
+  unlimited: {}
diff --git a/kubernetes/sdnc/charts/sdnc-portal/values.yaml b/kubernetes/sdnc/charts/sdnc-portal/values.yaml
index 1fba2a1..1d56d84 100644
--- a/kubernetes/sdnc/charts/sdnc-portal/values.yaml
+++ b/kubernetes/sdnc/charts/sdnc-portal/values.yaml
@@ -96,3 +96,4 @@
     requests:
       cpu: 1
       memory: 1Gi
+  unlimited: {}
diff --git a/kubernetes/sdnc/charts/ueb-listener/values.yaml b/kubernetes/sdnc/charts/ueb-listener/values.yaml
index c1dafbc..3560216 100644
--- a/kubernetes/sdnc/charts/ueb-listener/values.yaml
+++ b/kubernetes/sdnc/charts/ueb-listener/values.yaml
@@ -92,3 +92,4 @@
     requests:
       cpu: 1
       memory: 2Gi
+  unlimited: {}
diff --git a/kubernetes/sdnc/values.yaml b/kubernetes/sdnc/values.yaml
index 800cd0d..8560166 100644
--- a/kubernetes/sdnc/values.yaml
+++ b/kubernetes/sdnc/values.yaml
@@ -216,3 +216,4 @@
     requests:
       cpu: 2
       memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/so/charts/so-bpmn-infra/values.yaml b/kubernetes/so/charts/so-bpmn-infra/values.yaml
index fd7451e..6f301b9 100755
--- a/kubernetes/so/charts/so-bpmn-infra/values.yaml
+++ b/kubernetes/so/charts/so-bpmn-infra/values.yaml
@@ -46,6 +46,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     scheme: HTTP
diff --git a/kubernetes/so/charts/so-catalog-db-adapter/values.yaml b/kubernetes/so/charts/so-catalog-db-adapter/values.yaml
index 9eccf4b..2083633 100755
--- a/kubernetes/so/charts/so-catalog-db-adapter/values.yaml
+++ b/kubernetes/so/charts/so-catalog-db-adapter/values.yaml
@@ -1,62 +1,63 @@
-# Copyright © 2018 AT&T USA
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-repository: nexus3.onap.org:10001
+# Copyright © 2018 AT&T USA
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+repository: nexus3.onap.org:10001
 image: onap/so/catalog-db-adapter:1.3.0-STAGING-latest
-pullPolicy: IfNotPresent
-replicaCount: 1
-minReadySeconds: 10
-containerPort: 8082
-logPath: ./logs/catdb/
-app: catalog-db-adapter
-service:
-    type: ClusterIP
-    internalPort: 8082
-    externalPort: 8082
-    portName: so-catdb-port
-updateStrategy:
-    type: RollingUpdate
-    maxUnavailable: 1
-    maxSurge: 1
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      memory: 4Gi
-      cpu: 2000m
-    requests:
-      memory: 1Gi
-      cpu: 500m
-  large:
-    limits:
-      memory: 8Gi
-      cpu: 4000m
-    requests:
-      memory: 2Gi
-      cpu: 1000m
-livenessProbe:
-    path: /manage/health
-    port: 8082
-    scheme: HTTP
-    initialDelaySeconds: 600
-    periodSeconds: 60
-    timeoutSeconds: 10
-    successThreshold: 1
-    failureThreshold: 3
-ingress:
-  enabled: false
-nodeSelector: {}
-tolerations: []
-affinity: {}
+pullPolicy: IfNotPresent
+replicaCount: 1
+minReadySeconds: 10
+containerPort: 8082
+logPath: ./logs/catdb/
+app: catalog-db-adapter
+service:
+    type: ClusterIP
+    internalPort: 8082
+    externalPort: 8082
+    portName: so-catdb-port
+updateStrategy:
+    type: RollingUpdate
+    maxUnavailable: 1
+    maxSurge: 1
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      memory: 4Gi
+      cpu: 2000m
+    requests:
+      memory: 1Gi
+      cpu: 500m
+  large:
+    limits:
+      memory: 8Gi
+      cpu: 4000m
+    requests:
+      memory: 2Gi
+      cpu: 1000m
+  unlimited: {}
+livenessProbe:
+    path: /manage/health
+    port: 8082
+    scheme: HTTP
+    initialDelaySeconds: 600
+    periodSeconds: 60
+    timeoutSeconds: 10
+    successThreshold: 1
+    failureThreshold: 3
+ingress:
+  enabled: false
+nodeSelector: {}
+tolerations: []
+affinity: {}
diff --git a/kubernetes/so/charts/so-mariadb/values.yaml b/kubernetes/so/charts/so-mariadb/values.yaml
index 427257d..9545899 100755
--- a/kubernetes/so/charts/so-mariadb/values.yaml
+++ b/kubernetes/so/charts/so-mariadb/values.yaml
@@ -89,3 +89,4 @@
     requests:
       cpu: 2
       memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/so/charts/so-openstack-adapter/values.yaml b/kubernetes/so/charts/so-openstack-adapter/values.yaml
index 3883ae0..867e599 100755
--- a/kubernetes/so/charts/so-openstack-adapter/values.yaml
+++ b/kubernetes/so/charts/so-openstack-adapter/values.yaml
@@ -45,6 +45,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     port: 8087
diff --git a/kubernetes/so/charts/so-request-db-adapter/values.yaml b/kubernetes/so/charts/so-request-db-adapter/values.yaml
index a0f7279..50eb7ba 100755
--- a/kubernetes/so/charts/so-request-db-adapter/values.yaml
+++ b/kubernetes/so/charts/so-request-db-adapter/values.yaml
@@ -1,61 +1,62 @@
-# Copyright © 2018 AT&T USA
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+# Copyright © 2018 AT&T USA
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 image: onap/so/request-db-adapter:1.3.0-STAGING-latest
-pullPolicy: IfNotPresent
-replicaCount: 1
-minReadySeconds: 10
-containerPort: 8083
-logPath: ./logs/reqdb/
-app: request-db-adapter
-service:
-    type: ClusterIP
-    internalPort: 8083
-    externalPort: 8083
-    portName: so-reqdb-port
-updateStrategy:
-    type: RollingUpdate
-    maxUnavailable: 1
-    maxSurge: 1
-# Resource Limit flavor -By Default using small
-flavor: small
-# Segregation for Different environment (Small and Large)
-resources:
-  small:
-    limits:
-      memory: 4Gi
-      cpu: 2000m
-    requests:
-      memory: 1Gi
-      cpu: 500m
-  large:
-    limits:
-      memory: 8Gi
-      cpu: 4000m
-    requests:
-      memory: 2Gi
-      cpu: 1000m
-livenessProbe:
-    path: /manage/health
-    port: 8083
-    scheme: HTTP
-    initialDelaySeconds: 600
-    periodSeconds: 60
-    timeoutSeconds: 10
-    successThreshold: 1
-    failureThreshold: 3
-ingress:
-  enabled: false
-nodeSelector: {}
-tolerations: []
-affinity: {}
+pullPolicy: IfNotPresent
+replicaCount: 1
+minReadySeconds: 10
+containerPort: 8083
+logPath: ./logs/reqdb/
+app: request-db-adapter
+service:
+    type: ClusterIP
+    internalPort: 8083
+    externalPort: 8083
+    portName: so-reqdb-port
+updateStrategy:
+    type: RollingUpdate
+    maxUnavailable: 1
+    maxSurge: 1
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      memory: 4Gi
+      cpu: 2000m
+    requests:
+      memory: 1Gi
+      cpu: 500m
+  large:
+    limits:
+      memory: 8Gi
+      cpu: 4000m
+    requests:
+      memory: 2Gi
+      cpu: 1000m
+  unlimited: {}
+livenessProbe:
+    path: /manage/health
+    port: 8083
+    scheme: HTTP
+    initialDelaySeconds: 600
+    periodSeconds: 60
+    timeoutSeconds: 10
+    successThreshold: 1
+    failureThreshold: 3
+ingress:
+  enabled: false
+nodeSelector: {}
+tolerations: []
+affinity: {}
diff --git a/kubernetes/so/charts/so-sdc-controller/values.yaml b/kubernetes/so/charts/so-sdc-controller/values.yaml
index 50ff616..2981a82 100755
--- a/kubernetes/so/charts/so-sdc-controller/values.yaml
+++ b/kubernetes/so/charts/so-sdc-controller/values.yaml
@@ -45,6 +45,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     port: 8085
diff --git a/kubernetes/so/charts/so-sdnc-adapter/values.yaml b/kubernetes/so/charts/so-sdnc-adapter/values.yaml
index b56c415..4bab856 100755
--- a/kubernetes/so/charts/so-sdnc-adapter/values.yaml
+++ b/kubernetes/so/charts/so-sdnc-adapter/values.yaml
@@ -45,6 +45,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     port: 8086
diff --git a/kubernetes/so/charts/so-vfc-adapter/values.yaml b/kubernetes/so/charts/so-vfc-adapter/values.yaml
index 0b6f136..b0c3b01 100755
--- a/kubernetes/so/charts/so-vfc-adapter/values.yaml
+++ b/kubernetes/so/charts/so-vfc-adapter/values.yaml
@@ -45,6 +45,7 @@
     requests:
       memory: 2Gi
       cpu: 1000m
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     port: 8084
diff --git a/kubernetes/so/values.yaml b/kubernetes/so/values.yaml
index 03154ae..60d0424 100755
--- a/kubernetes/so/values.yaml
+++ b/kubernetes/so/values.yaml
@@ -46,6 +46,7 @@
     requests:
       cpu: 1000m
       memory: 2Gi
+  unlimited: {}
 livenessProbe:
     path: /manage/health
     scheme: HTTP
diff --git a/kubernetes/uui/charts/uui-server/values.yaml b/kubernetes/uui/charts/uui-server/values.yaml
index ecc93c0..268c6f3 100644
--- a/kubernetes/uui/charts/uui-server/values.yaml
+++ b/kubernetes/uui/charts/uui-server/values.yaml
@@ -90,3 +90,4 @@
     requests:
       cpu: 500m
       memory: 500Mi
+  unlimited: {}
diff --git a/kubernetes/uui/values.yaml b/kubernetes/uui/values.yaml
index 95be04b..266d17b 100644
--- a/kubernetes/uui/values.yaml
+++ b/kubernetes/uui/values.yaml
@@ -90,3 +90,4 @@
     requests:
       cpu: 500m
       memory: 1Gi
+  unlimited: {}
diff --git a/kubernetes/vid/charts/vid-mariadb-galera/values.yaml b/kubernetes/vid/charts/vid-mariadb-galera/values.yaml
index 10509d9..d5ed703 100644
--- a/kubernetes/vid/charts/vid-mariadb-galera/values.yaml
+++ b/kubernetes/vid/charts/vid-mariadb-galera/values.yaml
@@ -42,7 +42,7 @@
   mysqlDatabase: vid_openecomp_epsdk
 
 
-# default number of instances in the StatefulSet 
+# default number of instances in the StatefulSet
 # keep in mind that if the number is increased you need to update vid-galera-config-job.yaml so that the job will know to wait for all pods.
 replicaCount: 1
 
@@ -106,7 +106,7 @@
 #externalConfig: {}
 externalConfig: |-
   lower_case_table_names = 1
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -124,6 +124,7 @@
     requests:
       cpu: 20m
       memory: 1Gi
+  unlimited: {}
 # Name for mariadb-galera cluster - should be unique accross all projects or other clusters
 nameOverride: vid-mariadb-galera
 
diff --git a/kubernetes/vid/values.yaml b/kubernetes/vid/values.yaml
index 4b0f38c..79e9440 100644
--- a/kubernetes/vid/values.yaml
+++ b/kubernetes/vid/values.yaml
@@ -91,7 +91,7 @@
 ingress:
   enabled: false
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -108,4 +108,5 @@
       memory: 4Gi
     requests:
       cpu: 200m
-      memory: 2Gi
\ No newline at end of file
+      memory: 2Gi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vnfsdk/values.yaml b/kubernetes/vnfsdk/values.yaml
index 89630c9..b9b9016 100644
--- a/kubernetes/vnfsdk/values.yaml
+++ b/kubernetes/vnfsdk/values.yaml
@@ -61,7 +61,7 @@
 
 affinity: {}
 
-# Resource Limit flavor -By Default using small 
+# Resource Limit flavor -By Default using small
 flavor: small
 # Segregation for Different environment (Small and Large)
 resources:
@@ -79,6 +79,7 @@
     requests:
       cpu: 1000m
       memory: 2Gi
+  unlimited: {}
 
 # probe configuration parameters
 liveness: