diff --git a/kubernetes/dmaap/components/dbc/templates/NOTES.txt b/kubernetes/dmaap/components/dbc/templates/NOTES.txt
new file mode 100644
index 0000000..050853c
--- /dev/null
+++ b/kubernetes/dmaap/components/dbc/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}-prov)
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/dmaap/components/dbc/templates/configmap.yaml b/kubernetes/dmaap/components/dbc/templates/configmap.yaml
new file mode 100644
index 0000000..1066c94
--- /dev/null
+++ b/kubernetes/dmaap/components/dbc/templates/configmap.yaml
@@ -0,0 +1,53 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-config
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name:  {{ include "common.fullname" . }}-dbc-dmaap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/dmaap/*.json").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name:  {{ include "common.fullname" . }}-dbc-dcaelocations
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/dcaeLocations/*.json").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/components/dbc/templates/deployment.yaml b/kubernetes/dmaap/components/dbc/templates/deployment.yaml
new file mode 100644
index 0000000..0ecdc1c
--- /dev/null
+++ b/kubernetes/dmaap/components/dbc/templates/deployment.yaml
@@ -0,0 +1,103 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs,Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      hostAliases:
+      - ip: "10.12.6.214"
+        hostnames:
+        - "aaf-onap-test.osaaf.org"
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ .Values.postgres.nameOverride }}
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+          {{if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            httpGet:
+              port: {{ .Values.service.internalPort }}
+              path: /webapi/info
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          readinessProbe:
+            httpGet:
+              host: {{ .Values.dmaapMessageRouterService }}
+              port: 3904
+              path: /topics
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          {{ end -}}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+
+# NOTE: on the following several configMaps, careful to include / at end
+#       since there may be more than one file in each mountPath
+          - name: {{ include "common.name" . }}-config
+            mountPath: /opt/app/config/conf/
+
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.name" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-config
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dmaap/components/dbc/templates/post-install-job.yaml b/kubernetes/dmaap/components/dbc/templates/post-install-job.yaml
new file mode 100644
index 0000000..1272c53
--- /dev/null
+++ b/kubernetes/dmaap/components/dbc/templates/post-install-job.yaml
@@ -0,0 +1,67 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ include "common.fullname" . }}-post-install
+  labels:
+    app.kubernetes.io/managed-by: {{.Release.Service | quote }}
+    app.kubernetes.io/instance: {{.Release.Name | quote }}
+    helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}"
+  annotations:
+    # This is what defines this resource as a hook. Without this line, the
+    # job is considered part of the release.
+    "helm.sh/hook": post-install
+    "helm.sh/hook-weight": "-5"
+    "helm.sh/hook-delete-policy": hook-succeeded
+spec:
+  template:
+    metadata:
+      name: "{{.Release.Name}}"
+      labels:
+        app.kubernetes.io/managed-by: {{.Release.Service | quote }}
+        app.kubernetes.io/instance: {{.Release.Name | quote }}
+        helm.sh/chart: "{{.Chart.Name}}-{{.Chart.Version}}"
+    spec:
+      restartPolicy: Never
+
+      containers:
+      - name: post-install-job
+        image: "{{ include "common.repository" . }}/{{ .Values.global.clientImage }}"
+        env:
+        - name: DELAY
+          value: "0"
+        - name: REQUESTID
+          value: "{{.Chart.Name}}-post-install"
+        volumeMounts:
+        - mountPath: /etc/localtime
+          name: localtime
+          readOnly: true
+
+# NOTE: on the following several configMaps, careful to include / at end
+#       since there may be more than one file in each mountPath
+# NOTE: the basename of the subdirectory of mountPath is important - it matches the DBCL API URI
+        - name:  {{ include "common.fullname" . }}-dbc-dmaap
+          mountPath: /opt/app/config/dmaap/
+        - name:  {{ include "common.fullname" . }}-dbc-dcaelocations
+          mountPath: /opt/app/config/dcaeLocations/
+        resources:
+{{ include "common.resources" . | indent 10 }}
+        {{- if .Values.nodeSelector }}
+      nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 8 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+      affinity:
+{{ toYaml .Values.affinity | indent 8 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-dbc-dmaap
+          configMap:
+            name: {{ include "common.fullname" . }}-dbc-dmaap
+        - name: {{ include "common.fullname" . }}-dbc-dcaelocations
+          configMap:
+            name: {{ include "common.fullname" . }}-dbc-dcaelocations
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dmaap/components/dbc/templates/service.yaml b/kubernetes/dmaap/components/dbc/templates/service.yaml
new file mode 100644
index 0000000..4b51d44
--- /dev/null
+++ b/kubernetes/dmaap/components/dbc/templates/service.yaml
@@ -0,0 +1,48 @@
+# Copyright © 2018  AT&T Intellectual Property.  All rights reserved.
+# Modifications Copyright © 2018 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.name }}2
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.service.name }}2
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}