Merge "commiting resource limit for onap-aaf component"
diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml
index 1cd5cb4..a149f06 100644
--- a/kubernetes/aaf/charts/aaf-cm/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cm/values.yaml
@@ -19,13 +19,14 @@
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_cm:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -65,21 +66,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 800Mi
+ requests:
+ cpu: 20m
+ memory: 500Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 600Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml
index 83eaf15..73dac29 100644
--- a/kubernetes/aaf/charts/aaf-cs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/values.yaml
@@ -17,7 +17,7 @@
#################################################################
global:
nodePortPrefix: 302
-
+flavor: small
#################################################################
# Application configuration defaults.
@@ -71,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 10000Mi
+ requests:
+ cpu: 10m
+ memory: 8500Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 12000Mi
+ requests:
+ cpu: 40m
+ memory: 9000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml
index f484883..0e3a81a 100644
--- a/kubernetes/aaf/charts/aaf-fs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-fs/values.yaml
@@ -19,13 +19,13 @@
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_fs:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -65,21 +65,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 10m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 500m
+ memory: 700Mi
+ requests:
+ cpu: 100m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml
index 92faa6c..5665d1d 100644
--- a/kubernetes/aaf/charts/aaf-gui/values.yaml
+++ b/kubernetes/aaf/charts/aaf-gui/values.yaml
@@ -19,13 +19,13 @@
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_gui:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -66,21 +66,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 1Gi
+ requests:
+ cpu: 100m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml
index 27f59d1..6fcf861 100644
--- a/kubernetes/aaf/charts/aaf-hello/values.yaml
+++ b/kubernetes/aaf/charts/aaf-hello/values.yaml
@@ -25,7 +25,7 @@
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_hello:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -65,21 +65,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 20m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml
index 86d67fc..c924002 100644
--- a/kubernetes/aaf/charts/aaf-locate/values.yaml
+++ b/kubernetes/aaf/charts/aaf-locate/values.yaml
@@ -23,13 +23,13 @@
# If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
# persistence:
# mountPath: /dockerdata
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_locate:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -69,21 +69,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 20m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml
index c349814..943ad16 100644
--- a/kubernetes/aaf/charts/aaf-oauth/values.yaml
+++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml
@@ -19,13 +19,13 @@
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_oauth:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -65,21 +65,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 400Mi
+ requests:
+ cpu: 20m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 600Mi
+ requests:
+ cpu: 40m
+ memory: 200Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml
index 3e0ed61..5ad31ff 100644
--- a/kubernetes/aaf/charts/aaf-service/values.yaml
+++ b/kubernetes/aaf/charts/aaf-service/values.yaml
@@ -19,13 +19,13 @@
nodePortPrefix: 302
readinessRepository: oomk8s
readinessImage: readiness-check:2.0.0
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_service:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_service:2.1.1
pullPolicy: Always
# flag to enable debugging - application support required
@@ -66,21 +66,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 600Mi
+ requests:
+ cpu: 20m
+ memory: 300Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 40m
+ memory: 300Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
index 5eb7b33..0a83e85 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
@@ -47,7 +47,7 @@
- mountPath: /quorumclient/auth
name: {{ include "common.fullname" . }}-auth
resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
{{- if .Values.nodeSelector }}
nodeSelector:
{{ toYaml .Values.nodeSelector | indent 10 }}
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
index c5fd489..d6ac1cb 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
@@ -28,7 +28,7 @@
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
pullPolicy: Always
# flag to enable debugging - application support required
@@ -54,21 +54,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 700Mi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
index ddfc7c6..ab0ad17 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
@@ -45,7 +45,8 @@
- mountPath: /etc/localtime
name: localtime
readOnly: true
-
+ resources:
+{{ include "common.resources" . | indent 10 }}
- image: "{{ include "common.repository" . }}/{{ .Values.image.consul }}"
name: {{ include "common.name" . }}-backend
imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
@@ -62,6 +63,8 @@
- mountPath: /etc/localtime
name: localtime
readOnly: true
+ resources:
+{{ include "common.resources" . | indent 10 }}
volumes:
- name: {{ include "common.fullname" . }}-consuldata
persistentVolumeClaim:
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
index 317abcd..58017bd 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
@@ -90,21 +90,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 700Mi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
index 189cc0d..ed24f67 100644
--- a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
@@ -81,7 +81,7 @@
- mountPath: /sms/auth
name: {{ include "common.fullname" . }}-auth
resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
{{- if .Values.nodeSelector }}
nodeSelector:
{{ toYaml .Values.nodeSelector | indent 10 }}
diff --git a/kubernetes/aaf/charts/aaf-sms/values.yaml b/kubernetes/aaf/charts/aaf-sms/values.yaml
index b75038c..7a25581 100644
--- a/kubernetes/aaf/charts/aaf-sms/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/values.yaml
@@ -22,13 +22,13 @@
loggingRepository: docker.elastic.co
loggingImage: beats/filebeat:5.5.0
persistence: {}
-
+flavor: small
#################################################################
# Application configuration defaults.
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
pullPolicy: Always
# flag to enable debugging - application support required
@@ -84,21 +84,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 10m
+ memory: 10Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1Gi
+ requests:
+ cpu: 10m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml
index c8f0484..931a31d 100644
--- a/kubernetes/aaf/values.yaml
+++ b/kubernetes/aaf/values.yaml
@@ -23,7 +23,6 @@
ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
persistence:
enabled: true
-
#################################################################
# Application configuration defaults.
#################################################################
@@ -38,8 +37,9 @@
csServiceName: aaf-cass
# gerrit branch where the latest aaf/auth/sample/public code exists
gerritProject: http://gerrit.onap.org/r/aaf/authz.git
- gerritBranch: master
+ gerritBranch: 2.0.0-ONAP
+flavor: small
# default number of instances
replicaCount: 1
@@ -83,21 +83,20 @@
mountPath: /dockerdata-nfs
mountSubPath: aaf/data
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 2
+ memory: 3Gi
+ requests:
+ cpu: 2
+ memory: 3Gi
+ large:
+ limits:
+ cpu: 4
+ memory: 6Gi
+ requests:
+ cpu: 4
+ memory: 6Gi
+ unlimited: {}