Merge "commiting resource limit for onap-aaf component"
diff --git a/kubernetes/msb/charts/kube2msb/values.yaml b/kubernetes/msb/charts/kube2msb/values.yaml
index 7532c28..af84593 100644
--- a/kubernetes/msb/charts/kube2msb/values.yaml
+++ b/kubernetes/msb/charts/kube2msb/values.yaml
@@ -51,21 +51,23 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 1
+ memory: 1Gi
+ requests:
+ cpu: 500m
+ memory: 500Mi
+ large:
+ limits:
+ cpu: 2
+ memory: 2Gi
+ requests:
+ cpu: 1
+ memory: 1Gi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/msb/charts/msb-consul/values.yaml b/kubernetes/msb/charts/msb-consul/values.yaml
index dd66349..79a2640 100644
--- a/kubernetes/msb/charts/msb-consul/values.yaml
+++ b/kubernetes/msb/charts/msb-consul/values.yaml
@@ -58,21 +58,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 20m
+ memory: 100Mi
+ requests:
+ cpu: 10m
+ memory: 50Mi
+ large:
+ limits:
+ cpu: 40m
+ memory: 200Mi
+ requests:
+ cpu: 20m
+ memory: 100Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/msb/charts/msb-discovery/values.yaml b/kubernetes/msb/charts/msb-discovery/values.yaml
index db04320..d36c153 100644
--- a/kubernetes/msb/charts/msb-discovery/values.yaml
+++ b/kubernetes/msb/charts/msb-discovery/values.yaml
@@ -24,7 +24,7 @@
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_discovery:1.2.0-STAGING-latest
+image: onap/msb/msb_discovery:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
@@ -60,21 +60,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 400m
+ memory: 400Mi
+ requests:
+ cpu: 200m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 800m
+ memory: 800Mi
+ requests:
+ cpu: 400m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/msb/charts/msb-eag/values.yaml b/kubernetes/msb/charts/msb-eag/values.yaml
index d611170..cf20fdc 100644
--- a/kubernetes/msb/charts/msb-eag/values.yaml
+++ b/kubernetes/msb/charts/msb-eag/values.yaml
@@ -24,7 +24,7 @@
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
@@ -64,21 +64,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 800Mi
+ requests:
+ cpu: 200m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/msb/charts/msb-iag/values.yaml b/kubernetes/msb/charts/msb-iag/values.yaml
index e747bff..b6417de 100644
--- a/kubernetes/msb/charts/msb-iag/values.yaml
+++ b/kubernetes/msb/charts/msb-iag/values.yaml
@@ -24,7 +24,7 @@
#################################################################
# application image
repository: nexus3.onap.org:10001
-image: onap/msb/msb_apigateway:1.2.0-STAGING-latest
+image: onap/msb/msb_apigateway:1.2.0-SNAPSHOT-latest
pullPolicy: Always
istioSidecar: true
@@ -64,21 +64,22 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 400Mi
+ requests:
+ cpu: 50m
+ memory: 200Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 800Mi
+ requests:
+ cpu: 100m
+ memory: 400Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-catalog/values.yaml b/kubernetes/vfc/charts/vfc-catalog/values.yaml
index 8ecd40b..8b0561e 100644
--- a/kubernetes/vfc/charts/vfc-catalog/values.yaml
+++ b/kubernetes/vfc/charts/vfc-catalog/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/catalog:1.1.0
pullPolicy: Always
@@ -69,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-db/values.yaml b/kubernetes/vfc/charts/vfc-db/values.yaml
index 776a281..83071e6 100644
--- a/kubernetes/vfc/charts/vfc-db/values.yaml
+++ b/kubernetes/vfc/charts/vfc-db/values.yaml
@@ -26,8 +26,10 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
-image: onap/vfc/db:1.1.0-STAGING-latest
+image: onap/vfc/db:latest
pullPolicy: Always
# flag to enable debugging - application support required
@@ -67,21 +69,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
index 1bd8601..2263bff 100644
--- a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/emsdriver:1.1.0
pullPolicy: Always
@@ -73,21 +75,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
index a90c3e8..6d2e283 100644
--- a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/gvnfmdriver:1.1.0
pullPolicy: Always
@@ -69,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
index 75a667c..9c2c8bb 100644
--- a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/huawei:1.1.0
pullPolicy: Always
@@ -71,21 +73,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
index aa6d5aa..cbdf9a5 100644
--- a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/jujudriver:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
index b58ac19..00fd3b8 100644
--- a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
+++ b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/multivimproxy:1.0.0
pullPolicy: Always
@@ -68,21 +70,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
index 912e80f..23fd17b 100644
--- a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0
pullPolicy: Always
@@ -70,21 +72,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 5000Mi
+ requests:
+ cpu: 100m
+ memory: 3000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 7000Mi
+ requests:
+ cpu: 200m
+ memory: 5000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
index 90daf51..2348953 100644
--- a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nfvo/svnfm/nokia:1.1.0
pullPolicy: Always
@@ -69,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-nslcm/values.yaml b/kubernetes/vfc/charts/vfc-nslcm/values.yaml
index c3f6e9d..7a9c8bd 100644
--- a/kubernetes/vfc/charts/vfc-nslcm/values.yaml
+++ b/kubernetes/vfc/charts/vfc-nslcm/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/nslcm:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-resmgr/values.yaml b/kubernetes/vfc/charts/vfc-resmgr/values.yaml
index 20f4ecd..36b778b 100644
--- a/kubernetes/vfc/charts/vfc-resmgr/values.yaml
+++ b/kubernetes/vfc/charts/vfc-resmgr/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/resmanagement:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
index 8992679..13f3e2f 100644
--- a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnflcm:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
index f828d52..4625127 100644
--- a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnfmgr:1.1.0
pullPolicy: Always
@@ -69,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-vnfres/values.yaml b/kubernetes/vfc/charts/vfc-vnfres/values.yaml
index 5e70487..005b8a5 100644
--- a/kubernetes/vfc/charts/vfc-vnfres/values.yaml
+++ b/kubernetes/vfc/charts/vfc-vnfres/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/vnfres:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
index fae22c6..2a486da 100644
--- a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
+++ b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/wfengine-activiti:1.1.0
pullPolicy: Always
@@ -69,21 +71,20 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 2000Mi
+ requests:
+ cpu: 100m
+ memory: 1000Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 4000Mi
+ requests:
+ cpu: 200m
+ memory: 2000Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-workflow/values.yaml b/kubernetes/vfc/charts/vfc-workflow/values.yaml
index 4be7845..050e58f 100644
--- a/kubernetes/vfc/charts/vfc-workflow/values.yaml
+++ b/kubernetes/vfc/charts/vfc-workflow/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/wfengine-mgrservice:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
index 3ea6f8d..4c9dbaa 100644
--- a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/ztesdncdriver:1.1.0
pullPolicy: Always
@@ -69,21 +71,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 200m
+ memory: 500Mi
+ requests:
+ cpu: 100m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 400m
+ memory: 1000Mi
+ requests:
+ cpu: 200m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
index e0e4788..288d86f 100644
--- a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
+++ b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml
@@ -26,6 +26,8 @@
# Application configuration defaults.
#################################################################
# application image
+flavor: small
+
repository: nexus3.onap.org:10001
image: onap/vfc/ztevnfmdriver:1.1.0
pullPolicy: Always
@@ -68,21 +70,21 @@
ingress:
enabled: false
-resources: {}
- # We usually recommend not to specify default resources and to leave this as a conscious
- # choice for the user. This also increases chances charts run on environments with little
- # resources, such as Minikube. If you do want to specify resources, uncomment the following
- # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
- #
- # Example:
- # Configure resource requests and limits
- # ref: http://kubernetes.io/docs/user-guide/compute-resources/
- # Minimum memory for development is 2 CPU cores and 4GB memory
- # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-# limits:
-# cpu: 2
-# memory: 4Gi
-# requests:
-# cpu: 2
-# memory: 4Gi
+
+# Configure resource requests and limits
+resources:
+ small:
+ limits:
+ cpu: 100m
+ memory: 500Mi
+ requests:
+ cpu: 50m
+ memory: 250Mi
+ large:
+ limits:
+ cpu: 200m
+ memory: 1000Mi
+ requests:
+ cpu: 100m
+ memory: 500Mi
+ unlimited: {}
\ No newline at end of file