diff --git a/docs/OOM Project Description/oom_project_description.rst b/docs/OOM Project Description/oom_project_description.rst
index 18309ca..ba9de5f 100644
--- a/docs/OOM Project Description/oom_project_description.rst
+++ b/docs/OOM Project Description/oom_project_description.rst
@@ -5,6 +5,10 @@
 ONAP Operations Manager Project
 ###############################
 
+.. contents::
+   :depth: 3
+..
+
 Introduction
 ============
 
@@ -22,46 +26,80 @@
 Quick Start Guide
 =================
 
-Once a kubernetes environment is available (check out `ONAP on Kubernetes <https://wiki.onap.org/display/DW/ONAP+on+Kubernetes>`__ if you're
-getting started) and the deployment artifacts have been customized for your location, ONAP is ready to be installed. 
+Pre-requisites
+--------------
 
-The first step is to setup
-the \ `/oom/kubernetes/config/onap-parameters.yaml <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters.yaml;h=7ddaf4d4c3dccf2fad515265f0da9c31ec0e64b1;hb=refs/heads/master>`__
-file with key-value pairs specific to your OpenStack environment.  There is a
-`sample <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters-sample.yaml;h=3a74beddbbf7f9f9ec8e5a6abaecb7cb238bd519;hb=refs/heads/master>`__
-that may help you out or even be usable directly if you don't intend to actually use OpenStack resources.
+* Your Kubernetes environment must be available. For more information see, `ONAP on Kubernetes <https://wiki.onap.org/display/DW/ONAP+on+Kubernetes>`__.
+* Deployment artifacts are customized for your location.
 
-In-order to be able to support multiple ONAP instances within a single kubernetes environment a configuration set is required.
- The `createConfig.sh <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/createConfig.sh;h=f226ccae47ca6de15c1da49be4b8b6de974895ed;hb=refs/heads/master>`__ script
-is used to do this.::
+**Step 1**
 
-  > ./createConfig.sh -n onapTrial
+Review and optionally change configuration parameters:
 
-The bash script 
-\ `createAll.bash <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/oneclick/createAll.bash;h=5e5f2dc76ea7739452e757282e750638b4e3e1de;hb=refs/heads/master>`__ is
-used to create an ONAP deployment with kubernetes. It has two primary
-functions:
+Setup the `/oom/kubernetes/config/onap-parameters.yaml <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters.yaml;h=7ddaf4d4c3dccf2fad515265f0da9c31ec0e64b1;hb=refs/heads/master>`__ file with key-value pairs specific to your OpenStack environment.
 
--  Creating the namespaces used to encapsulate the ONAP components, and
+OR
 
--  Creating the services, pods and containers within each of these
-   namespaces that provide the core functionality of ONAP.
+There is a `sample <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/onap-parameters-sample.yaml;h=3a74beddbbf7f9f9ec8e5a6abaecb7cb238bd519;hb=refs/heads/master>`__ that may help you out or even be usable directly if you don't intend to actually use OpenStack resources.
 
-To deploy the containers and create your ONAP system enter::
+**Step 2**
 
-  > ./createAll.bash -n onapTrial
+In-order to be able to support multiple ONAP instances within a single kubernetes environment, a configuration set is required. To do this, execute the `createConfig.sh <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/createConfig.sh;h=f226ccae47ca6de15c1da49be4b8b6de974895ed;hb=refs/heads/master>`__ script::
 
-Namespaces provide isolation between ONAP components as ONAP release 1.0
-contains duplicate application (e.g. mariadb) and port usage. As
-such createAll.bash requires the user to enter a namespace prefix string
-that can be used to separate multiple deployments of onap. The result
-will be set of 10 namespaces (e.g. onapTrial-sdc, onapTrial-aai,
-onapTrial-mso, onapTrial-message-router, onapTrial-robot, onapTrial-vid,
-onapTrial-sdnc, onapTrial-portal, onapTrial-policy, onapTrial-appc)
-being created within the kubernetes environment.  A prerequisite pod
-config-init (\ `pod-config-init.yaml <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/pod-config-init.yaml;h=b1285ce21d61815c082f6d6aa3c43d00561811c7;hb=refs/heads/master>`__)
-may need editing to match your environment and deployment into the
-default namespace before running createAll.bash.
+  oom/kubernetes/config/createConfig.sh -n onap
+  
+Where:
+
+* onap' refers to the name of the instance. This serves as the Namespace prefix for each deployed ONAP component (for example, onap-mso).
+
+**Step 3**
+
+The bash script `createAll.bash <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/oneclick/createAll.bash;h=5e5f2dc76ea7739452e757282e750638b4e3e1de;hb=refs/heads/master>`__ is used to create an ONAP deployment with kubernetes. It has two primary functions:
+
+* Creating the namespaces used to encapsulate the ONAP components, and
+* Creating the services, pods and containers within each of these namespaces that provide the core functionality of ONAP.
+
+Before you execute the createAll.bash. script, pod config-init (`pod-config-init.yaml <https://gerrit.onap.org/r/gitweb?p=oom.git;a=blob;f=kubernetes/config/pod-config-init.yaml;h=b1285ce21d61815c082f6d6aa3c43d00561811c7;hb=refs/heads/master>`__) may need editing to match your environment and deployment into the default namespace.
+
+To deploy the containers and create your ONAP system, execute the following command::
+  
+  oom/kubernetes/oneclick/createAll.bash -n onap
+  
+Additional information on usage of createAll.bash
+-------------------------------------------------
+
+Namespaces provide isolation between ONAP components as ONAP release 1.0 contains duplicate application (for example, mariadb) and port usage.
+
+As such createAll.bash requires the user to enter a namespace prefix string that can be used to separate multiple deployments of onap. The result will be set of 10 namespaces (for example, onap-sdc, onap-aai, onap-mso, onap-message-router, onap-robot, onap-vid, onap-sdnc, onap-portal, onap-policy, onap-appc) being created within the kubernetes environment.
+
+Deploying multiple ONAP instances within the same Kubernetes cluster
+--------------------------------------------------------------------
+
+To deploy multiple ONAP instances, you must specify the number of Instances you would like to create in a Kubernetes cluster using createAllbash.
+
+This is currently required due to the use of NodePort ranges. NodePorts allow external IP:Port access to containers that are running inside a Kubernetes cluster.
+
+To create multiple instances of an ONAP deployment in the cluster, use the following commands::
+  
+  oom/kubernetes/config/createConfig.sh -n onap
+  
+  oom/kubernetes/oneclick/createAll.bash -n onap -i 2
+  
+Where:
+
+* 'onap' refers to the name of the instance.
+* ‘i 2’ refers to the number of instances of an ONAP deployment in the cluster.
+
+To delete a deployed instance
+-----------------------------
+
+To delete a deployed instance, use the following command::
+  
+  oom/kubernetes/oneclick/deleteAll.bash -n onap
+  
+**Note**: Deleting the runtime containers does not remove the configuration created in step 2.
+
+For more information on OOM project documentation, refer to `Quick Start Guide on Wiki  <https://wiki.onap.org/display/DW/ONAP+Operations+Manager+Project#ONAPOperationsManagerProject-QuickStartGuide>`__.
 
 Demo Video
 ----------