diff --git a/kubernetes/log/components/Makefile b/kubernetes/log/components/Makefile
new file mode 100644
index 0000000..d62cb0b
--- /dev/null
+++ b/kubernetes/log/components/Makefile
@@ -0,0 +1,56 @@
+# Copyright © 2020 Samsung Electronics
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
+OUTPUT_DIR := $(ROOT_DIR)/../../dist
+PACKAGE_DIR := $(OUTPUT_DIR)/packages
+SECRET_DIR := $(OUTPUT_DIR)/secrets
+
+EXCLUDES :=
+HELM_BIN := helm
+HELM_CHARTS := $(filter-out $(EXCLUDES), $(sort $(patsubst %/.,%,$(wildcard */.))))
+HELM_VER := $(shell $(HELM_BIN) version --template "{{.Version}}")
+
+.PHONY: $(EXCLUDES) $(HELM_CHARTS)
+
+all: $(HELM_CHARTS)
+
+$(HELM_CHARTS):
+	@echo "\n[$@]"
+	@make package-$@
+
+make-%:
+	@if [ -f $*/Makefile ]; then make -C $*; fi
+
+dep-%: make-%
+	@if [ -f $*/requirements.yaml ]; then $(HELM_BIN) dep up $*; fi
+
+lint-%: dep-%
+	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) lint $*; fi
+
+package-%: lint-%
+	@mkdir -p $(PACKAGE_DIR)
+ifeq "$(findstring v3,$(HELM_VER))" "v3"
+	@if [ -f $*/Chart.yaml ]; then PACKAGE_NAME=$$($(HELM_BIN) package -d $(PACKAGE_DIR) $* | cut -d":" -f2) && $(HELM_BIN) push -f $$PACKAGE_NAME local; fi
+else
+	@if [ -f $*/Chart.yaml ]; then $(HELM_BIN) package -d $(PACKAGE_DIR) $*; fi
+endif
+	@$(HELM_BIN) repo index $(PACKAGE_DIR)
+
+clean:
+	@rm -f */requirements.lock
+	@rm -f *tgz */charts/*tgz
+	@rm -rf $(PACKAGE_DIR)
+%:
+	@:
diff --git a/kubernetes/log/components/log-elasticsearch/Chart.yaml b/kubernetes/log/components/log-elasticsearch/Chart.yaml
new file mode 100644
index 0000000..66b0257
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Logging Elasticsearch
+name: log-elasticsearch
+version: 6.0.0
diff --git a/kubernetes/log/components/log-elasticsearch/requirements.yaml b/kubernetes/log/components/log-elasticsearch/requirements.yaml
new file mode 100644
index 0000000..bdc1920
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~6.x-0
+    repository: '@local'
+  - name: repositoryGenerator
+    version: ~6.x-0
+    repository: '@local'
diff --git a/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml b/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml
new file mode 100644
index 0000000..d39fc97
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/resources/config/elasticsearch.yml
@@ -0,0 +1,146 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ======================== Elasticsearch Configuration =========================
+#
+# NOTE: Elasticsearch comes with reasonable defaults for most settings.
+#       Before you set out to tweak and tune the configuration, make sure you
+#       understand what are you trying to accomplish and the consequences.
+#
+# The primary way of configuring a node is via this file. This template lists
+# the most important settings you may want to configure for a production cluster.
+#
+# Please consult the documentation for further information on configuration options:
+# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
+#
+# ---------------------------------- Cluster -----------------------------------
+#
+# Name of the Elasticsearch cluster.
+# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
+# The default name is elasticsearch, but you should change it to an appropriate name which describes the
+# purpose of the cluster.
+#
+cluster.name: "onap-log"
+#
+# The port that other nodes in the cluster should use when communicating with this node.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_port:$transport.publish_port
+#
+# The host address to publish for nodes in the cluster to connect to.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_host:$transport.publish_host
+#
+# ------------------------------------ Node ------------------------------------
+#
+# It is better to provide different meaningfull names fot different elastic nodes.
+# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
+# Note that the node id is persisted and does not change when a node restarts
+#
+#node.name: $node.name
+#
+# Add custom attributes to the node:
+#
+#node.attr.rack: r1
+#
+# ----------------------------------- Paths ------------------------------------
+#
+# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
+# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
+# may change & can deal to data loss.
+path.data: /usr/share/elasticsearch/data
+#
+# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
+# as on upgrading Elasticsearch, directory structure may change.
+path.logs: /usr/share/elasticsearch/logs
+#
+# ----------------------------------- Memory -----------------------------------
+#
+# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
+# Lock the memory on startup.
+#
+bootstrap.memory_lock: false
+#
+# Make sure that the heap size is set to about half the memory available
+# on the system and that the owner of the process is allowed to use this
+# limit.
+#
+# Elasticsearch performs poorly when the system is swapping the memory.
+#
+# ---------------------------------- Network -----------------------------------
+#
+# Set the bind address to a specific IP (IPv4 or IPv6):
+# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
+# non-loopback address.
+network.host: 0.0.0.0
+#
+# Set a custom port for HTTP: If required, default is 9200-9300
+#
+#http.port: $http.port
+#
+# For more information, consult the network module documentation.
+#
+# --------------------------------- Discovery ----------------------------------
+#
+# Pass an initial list of hosts to perform discovery when new node is started
+# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
+# that are likely to be live and contactable.
+# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
+# to connect to other nodes running on the same server.
+#
+#$discovery.zen.ping.unicast.hosts
+#
+# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
+# available. Only then will an election take place.
+# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
+discovery.zen.minimum_master_nodes: 1
+#
+# For more information, consult the zen discovery module documentation.
+#
+# ---------------------------------- Gateway -----------------------------------
+#
+# Block initial recovery after a full cluster restart until N nodes are started:
+#
+#gateway.recover_after_nodes: 3
+#
+# For more information, consult the gateway module documentation.
+#
+# ---------------------------------- Various -----------------------------------
+#
+# Require explicit names when deleting indices:
+#
+#action.destructive_requires_name: true
+# Set a custom port for HTTP: If required, default is 9200-9300
+# This is used for REST APIs
+http.port: {{.Values.service.externalPort}}
+# Port to bind for communication between nodes. Accepts a single value or a range.
+# If a range is specified, the node will bind to the first available port in the range.
+# Defaults to 9300-9400.
+# More info:
+transport.tcp.port: {{.Values.service.externalPort2}}
+
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
diff --git a/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt b/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt
new file mode 100644
index 0000000..ab908cd
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml b/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml
new file mode 100644
index 0000000..fe0349e
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/configmap.yaml
@@ -0,0 +1,29 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml b/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml
new file mode 100644
index 0000000..6a0e6d2
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/deployment.yaml
@@ -0,0 +1,112 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ include "common.release" . }}
+    spec:
+      initContainers:
+      - command:
+        - /bin/sh
+        - -c
+        - |
+          sysctl -w vm.max_map_count=262144
+          mkdir -p /logroot/elasticsearch/logs
+          mkdir -p /logroot/elasticsearch/data
+          chmod -R 777 /logroot/elasticsearch
+          chown -R root:root /logroot
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        securityContext:
+          privileged: true
+        image: {{ include "repositoryGenerator.image.busybox" . }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: init-sysctl
+        volumeMounts:
+        - name: {{ include "common.fullname" . }}-logs
+          mountPath: /logroot/
+      containers:
+        - name: {{ include "common.name" . }}
+          image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources:
+{{ include "common.resources" . | indent 12 }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ .Values.service.name }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+            name: {{ .Values.service.name2 }}
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort2 }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+            name: {{ include "common.fullname" . }}-config
+            subPath: elasticsearch.yml
+          - mountPath: /usr/share/elasticsearch/data/
+            name: {{ include "common.fullname" . }}-data
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: elasticsearch.yml
+              path: elasticsearch.yml
+        - name: {{ include "common.fullname" . }}-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+        - name: {{ include "common.fullname" . }}-logs
+          hostPath:
+            path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPathLogs }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml b/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml
new file mode 100644
index 0000000..8f87c68
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/ingress.yaml
@@ -0,0 +1 @@
+{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/pv.yaml b/kubernetes/log/components/log-elasticsearch/templates/pv.yaml
new file mode 100644
index 0000000..9d4093d
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/pv.yaml
@@ -0,0 +1,37 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}-data
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ include "common.release" . }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  storageClassName: "{{ include "common.fullname" . }}-data"
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml b/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml
new file mode 100644
index 0000000..6ae4eea
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/pvc.yaml
@@ -0,0 +1,38 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ include "common.release" . }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  storageClassName: {{ include "common.storageClass" . }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- end -}}
diff --git a/kubernetes/log/components/log-elasticsearch/templates/service.yaml b/kubernetes/log/components/log-elasticsearch/templates/service.yaml
new file mode 100644
index 0000000..7736f0c
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/templates/service.yaml
@@ -0,0 +1,70 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name2 }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type2 }}
+  ports:
+    {{if eq .Values.service.type2 "NodePort" -}}
+    - port: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.name2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.service.name2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-elasticsearch/values.yaml b/kubernetes/log/components/log-elasticsearch/values.yaml
new file mode 100644
index 0000000..7919a09
--- /dev/null
+++ b/kubernetes/log/components/log-elasticsearch/values.yaml
@@ -0,0 +1,116 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# application image
+image: elasticsearch/elasticsearch:5.5.0
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  accessMode: ReadWriteOnce
+  size: 1Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: log/elasticsearch/data
+  mountSubPathLogs: log
+
+service:
+  type: NodePort
+  name: log-es
+  externalPort: 9200
+  internalPort: 9200
+  nodePort: 54
+  type2: ClusterIP
+  name2: log-es-tcp
+  externalPort2: 9300
+  internalPort2: 9300
+
+ingress:
+  enabled: false
+  service:
+    - baseaddr: "loges"
+      name: "log-es"
+      port: 9200
+  config:
+    ssl: "none"
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 4Gi
+    requests:
+      cpu: 1
+      memory: 2Gi
+  large:
+    limits:
+      cpu: 2
+      memory: 8Gi
+    requests:
+      cpu: 1
+      memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/log/components/log-kibana/Chart.yaml b/kubernetes/log/components/log-kibana/Chart.yaml
new file mode 100644
index 0000000..8f5d973
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Logging Kibana
+name: log-kibana
+version: 6.0.0
diff --git a/kubernetes/log/components/log-kibana/requirements.yaml b/kubernetes/log/components/log-kibana/requirements.yaml
new file mode 100644
index 0000000..bdc1920
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~6.x-0
+    repository: '@local'
+  - name: repositoryGenerator
+    version: ~6.x-0
+    repository: '@local'
diff --git a/kubernetes/log/components/log-kibana/resources/config/README.txt b/kubernetes/log/components/log-kibana/resources/config/README.txt
new file mode 100644
index 0000000..2863c1d
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/resources/config/README.txt
@@ -0,0 +1 @@
+"kibana-onboarding.json" file contains initial setup of Kibana obtained using Elasticdump tool.
\ No newline at end of file
diff --git a/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json b/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/resources/config/kibana-onboarding.json
diff --git a/kubernetes/log/components/log-kibana/resources/config/kibana.yml b/kubernetes/log/components/log-kibana/resources/config/kibana.yml
new file mode 100644
index 0000000..377f3c7
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/resources/config/kibana.yml
@@ -0,0 +1,129 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+xpack.reporting.enabled: false
+#Set to false to disable X-Pack reporting features.
+xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+xpack.watcher.enabled: false
+#Set to false to disable Watcher.
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: {{.Values.service.externalPort}}
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "0"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
+# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
+# to Kibana. This setting cannot end in a slash.
+#server.basePath: ""
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayloadBytes: 1048576
+
+# The Kibana server's name.  This is used for display purposes.
+server.name: "Kibana"
+
+# The URL of the Elasticsearch instance to use for all your queries.
+elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"
+# When this setting's value is true Kibana uses the hostname specified in the server.host
+# setting. When the value of this setting is false, Kibana uses the hostname of the host
+# that connects to this Kibana instance.
+#elasticsearch.preserveHost: true
+
+# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
+# dashboards. Kibana creates a new index if the index doesn't already exist.
+#kibana.index: ".kibana"
+
+# The default application to load.
+#kibana.defaultAppId: "discover"
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+elasticsearch.username: "elastic"
+elasticsearch.password: "changeme"
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+#server.ssl.enabled: $server_ssl_enabled
+#server.ssl.certificate: $server_ssl_certificate
+#server.ssl.key: $server_ssl_key
+
+# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
+# These files validate that your Elasticsearch backend uses the same key files.
+#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
+#elasticsearch.ssl.key: $elasticsearch_ssl_key
+
+# Optional setting that enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+#elasticsearch.requestTimeout: 30000
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 0
+
+# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
+#elasticsearch.startupTimeout: 5000
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /var/run/kibana.pid
+
+# Enables you specify a file where Kibana stores log output.
+#logging.dest: stdout
+
+# Set the value of this setting to true to suppress all logging output.
+#logging.silent: false
+
+# Set the value of this setting to true to suppress all logging output other than error messages.
+#logging.quiet: false
+
+# Set the value of this setting to true to log all events, including system usage information
+# and all requests.
+#logging.verbose: false
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000.
+#ops.interval: 5000
+
+# The default locale. This locale can be used in certain circumstances to substitute any missing
+# translations.
+#i18n.defaultLocale: "en"
diff --git a/kubernetes/log/components/log-kibana/templates/NOTES.txt b/kubernetes/log/components/log-kibana/templates/NOTES.txt
new file mode 100644
index 0000000..f115eb6
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/log/components/log-kibana/templates/configmap.yaml b/kubernetes/log/components/log-kibana/templates/configmap.yaml
new file mode 100644
index 0000000..3e98246
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/templates/configmap.yaml
@@ -0,0 +1,29 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-kibana/templates/deployment.yaml b/kubernetes/log/components/log-kibana/templates/deployment.yaml
new file mode 100644
index 0000000..a1824d2
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/templates/deployment.yaml
@@ -0,0 +1,114 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ include "common.release" . }}
+    spec:
+      initContainers:
+      - command:
+        - /app/ready.py
+        args:
+        - --container-name
+        - log-elasticsearch
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: {{ include "repositoryGenerator.image.readiness" . }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      - args:
+        - --input=/config/kibana-onboarding.json
+        - --output=http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}/.kibana
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: {{ include "repositoryGenerator.dockerHubRepository" . }}/{{ .Values.elasticdumpImage }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-elasticdump
+        volumeMounts:
+          - mountPath: /config/kibana-onboarding.json
+            name: {{ include "common.fullname" . }}
+            subPath: kibana-onboarding.json
+      containers:
+        - name: {{ include "common.name" . }}
+          image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources:
+{{ include "common.resources" . | indent 12 }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ .Values.service.name }}
+          readinessProbe:
+            httpGet:
+              path: "/"
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+            timeoutSeconds: {{ .Values.readiness.timeoutSeconds }}
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            httpGet:
+              path: "/"
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+            timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
+          {{ end -}}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/kibana/config/
+            name: {{ include "common.fullname" . }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: kibana.yml
+              path: kibana.yml
+            - key: kibana-onboarding.json
+              path: kibana-onboarding.json
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-kibana/templates/ingress.yaml b/kubernetes/log/components/log-kibana/templates/ingress.yaml
new file mode 100644
index 0000000..8f87c68
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/templates/ingress.yaml
@@ -0,0 +1 @@
+{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-kibana/templates/service.yaml b/kubernetes/log/components/log-kibana/templates/service.yaml
new file mode 100644
index 0000000..c53dc03
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/templates/service.yaml
@@ -0,0 +1,43 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-kibana/values.yaml b/kubernetes/log/components/log-kibana/values.yaml
new file mode 100644
index 0000000..767ea6a
--- /dev/null
+++ b/kubernetes/log/components/log-kibana/values.yaml
@@ -0,0 +1,100 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# Elasticdump image
+elasticdumpImage: taskrabbit/elasticsearch-dump
+
+# application image
+image: kibana/kibana:5.5.0
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  elasticsearchServiceName: log-es
+  elasticsearchPort: 9200
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 300
+  periodSeconds: 10
+  timeoutSeconds: 1
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 300
+  periodSeconds: 10
+  timeoutSeconds: 1
+
+service:
+  #Example service definition with external, internal and node ports.
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: NodePort
+  name: log-kibana
+  externalPort: 5601
+  internalPort: 5601
+  nodePort: 53
+
+ingress:
+  enabled: false
+  service:
+    - baseaddr: "kibana.api"
+      name: "log-kibana"
+      port: 5601
+  config:
+    ssl: "none"
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 2
+      memory: 4Gi
+    requests:
+      cpu: 1
+      memory: 2Gi
+  large:
+    limits:
+      cpu: 4
+      memory: 8Gi
+    requests:
+      cpu: 2
+      memory: 4Gi
+  unlimited: {}
diff --git a/kubernetes/log/components/log-logstash/Chart.yaml b/kubernetes/log/components/log-logstash/Chart.yaml
new file mode 100644
index 0000000..8349548
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Logging Logstash
+name: log-logstash
+version: 6.0.0
diff --git a/kubernetes/log/components/log-logstash/requirements.yaml b/kubernetes/log/components/log-logstash/requirements.yaml
new file mode 100644
index 0000000..bdc1920
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~6.x-0
+    repository: '@local'
+  - name: repositoryGenerator
+    version: ~6.x-0
+    repository: '@local'
diff --git a/kubernetes/log/components/log-logstash/resources/config/logstash.yml b/kubernetes/log/components/log-logstash/resources/config/logstash.yml
new file mode 100644
index 0000000..7c3bd8f
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/resources/config/logstash.yml
@@ -0,0 +1,32 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+http.host: "0.0.0.0"
+pipeline.workers: 3
+## Path where pipeline configurations reside
+path.config: /usr/share/logstash/pipeline
+
+## Type of queue : memeory based or file based
+#queue.type: persisted
+## Size of queue
+#queue.max_bytes: 1024mb
+## Setting true makes logstash check periodically for change in pipeline configurations
+config.reload.automatic: true
+
+## xpack configurations
+#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"]
+#xpack.monitoring.elasticsearch.username: elastic
+#xpack.monitoring.elasticsearch.password: changeme
+xpack.monitoring.enabled: false
diff --git a/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
new file mode 100644
index 0000000..d6b0696
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/resources/config/onap-pipeline.conf
@@ -0,0 +1,276 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+input {
+ beats {
+
+ ## Add a id to plugin configuration. Can be anything unique.
+ id => 'beats_plugin'
+
+ ######## Connection configurations ########
+
+ ## The port to listen on.
+ port => {{.Values.service.externalPort}}
+
+ ## Close Idle clients after the specified time in seconds. Default is 60 seconds
+ #client_inactivity_timeout => 60
+
+ ######## Security configurations ########
+
+ ## Enable encryption. Default false.
+ #ssl => $filebeat_ssl
+
+ ## ssl certificate path.
+ #ssl_certificate => $filebeat_ssl_certificate
+
+ ## SSL key to use.
+ #ssl_key => $filebeat_ssl_key
+
+ ##SSL key passphrase to use.
+ #ssl_key_passphrase => $filebeat_ssl_key_passphrase
+
+ ## Value can be any of: none, peer, force_peer.
+ #ssl_verify_mode => $filebeat_ssl_verify_mode
+
+ ## Time in milliseconds for an incomplete ssl handshake to timeout. Default is 10000 ms.
+ #ssl_handshake_timeout => 10000
+ include_codec_tag => false
+ }
+}
+
+
+filter {
+  grok {
+    break_on_match => false
+    match => {
+      "source" => ["/var/log/onap/(?<componentName>[^/]+)/",
+                   "/var/log/onap/%{GREEDYDATA:componentLogFile}"
+                  ]
+    }
+  }
+
+ # Filter for log4j xml events
+ if "</log4j:event>" in [message] {
+
+   #mutate { add_field => { "orgmsg_log4j" => "%{message}" } }    # Copy of orginal msg for debug
+
+   #Filter to parse xml event and retrieve data
+   xml {
+     source => "message"
+     store_xml => false
+     remove_namespaces => true
+     target => "xml_content"
+     xpath => [ "/event/message/text()", "logmsg" ,
+                "/event/@logger", "Logger",
+                "/event/@timestamp", "Timestamp",
+                "/event/@level", "loglevel",
+                "/event/@thread", "Thread",
+                "/event/throwable/text()", "Exceptionthrowable",
+                "/event/NDC/text()", "NDCs",
+                "/event/properties/data/@name","mdcname",
+                "/event/properties/data/@value","mdcvalue"]
+
+    }
+
+   #Ruby filter to iterate and separate MDCs into documents
+   ruby {
+     code => '
+       $i = 0
+       $num = 0
+       if event.get("[mdcname]")
+         $num = event.get("[mdcname]").length
+       end
+	   if $num != 0
+        until $i > $num do
+         if event.get("[mdcname]").at($i) and event.get("[mdcvalue]").at($i)
+            event.set(event.get("[mdcname]").at($i), event.get("[mdcvalue]").at($i))
+         end
+         $i=$i+1
+        end
+	   end
+          '
+    }
+
+   #Validations
+   if [Exceptionthrowable]
+   {
+      mutate {
+        replace => {
+           "exceptionmessage" => "%{[Exceptionthrowable]}"
+        }
+      }
+    }
+
+   if [NDCs]
+   {
+      mutate {
+        replace => {
+          "NDC" => "%{[NDCs]}"
+        }
+      }
+   }
+
+   mutate {
+     replace => {
+        "Logger" =>"%{[Logger]}"
+        "logmsg" =>"%{[logmsg]}"
+        "Timestamp" =>"%{[Timestamp]}"
+        "loglevel" =>"%{[loglevel]}"
+        "message" => "%{logmsg}"
+        "Thread" => "%{[Thread]}"
+     }
+     remove_field => ["mdcname", "mdcvalue", "logmsg","Exceptionthrowable","NDCs"]
+   }
+
+   if [Timestamp]
+   {
+     date {
+        match => ["Timestamp", "UNIX_MS"]
+        target => "Timestamp"
+     }
+   }
+ }
+ # Filter for logback events
+ else {
+
+  #mutate { add_field => { "orgmsg" => "%{message}" } }    # Copy of orginal msg for debug
+
+  mutate {
+    gsub => [
+      'message', ' = ', '=',
+      'message', '= ', '=null',
+      'message', '=\t', '=null	', #This null is followed by a tab
+      'message', '\t$', '\t'
+    ]
+  }
+  # The grok below parses the message field for all current logback patterns used by oom components.
+  # Example logback pattern: %d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}|%X{RequestId}|%msg
+  # Example grok pattern:    %{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}
+  # Use the following command to find all logback patterns in oom directory: find oom -name "logback*xml" -exec grep "property.*attern.*value" {} \;|sort|uniq
+  grok {
+    match => {
+      "message" => [
+                    "%{TIMESTAMP_ISO8601:Timestamp}\\t[%{GREEDYDATA:Thread}]\\t%{GREEDYDATA:loglevel}\\t%{JAVACLASS:Logger}\\t%{GREEDYDATA:MDCs}\\t%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:TargetVirtualEntity}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:BeginTimestamp}\|%{TIMESTAMP_ISO8601:EndTimestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:Unknown1}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:StatusCode}\|%{GREEDYDATA:ResponseCode}\|%{GREEDYDATA:ResponseDesc}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{GREEDYDATA:Timer}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Unknown2}\|%{GREEDYDATA:Unknown3}\|%{GREEDYDATA:Unknown4}\|%{GREEDYDATA:Unknown5}\|%{GREEDYDATA:Unknown6}\|%{GREEDYDATA:Unknown7}\|%{GREEDYDATA:Unknown8}\|%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:ServiceInstanceId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{UUID:InstanceUUID}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:AlertSeverity}\|%{IP:ServerIPAddress}\|%{HOSTNAME:ServerFQDN}\|%{IPORHOST:RemoteHost}\|%{GREEDYDATA:Timer}\|\[%{GREEDYDATA:caller}\]\|%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ServiceName}\|%{GREEDYDATA:PartnerName}\|%{GREEDYDATA:TargetEntity}\|%{GREEDYDATA:TargetServiceName}\|%{GREEDYDATA:loglevel}\|%{GREEDYDATA:ErrorCode}\|%{GREEDYDATA:ErrorDesc}\|%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{GREEDYDATA:RequestId}\|%{GREEDYDATA:Thread}\|%{GREEDYDATA:ClassName}\|%{GREEDYDATA:message}",
+                    "%{TIMESTAMP_ISO8601:Timestamp}\|%{UUID:RequestId}\|%{GREEDYDATA:message}",
+                    "\[%{TIMESTAMP_ISO8601:Timestamp}\|%{LOGLEVEL:loglevel}\|%{GREEDYDATA:Logger}\|%{GREEDYDATA:Thread}\] %{GREEDYDATA:message}"
+      ]
+    }
+    overwrite => ["message"]
+  }
+  # The MDCs are key value pairs that are seperated by "," or "\t". Extra space characters are trimmed from the keys and values.
+  kv {
+    source => "MDCs"
+    field_split => ",\t"
+    trim_key => "\s"
+    trim_value => "\s"
+    remove_field => [ "MDCs" ]
+  }
+
+  if (![Timestamp] and [EndTimestamp]) {
+    mutate { add_field => { "Timestamp" => "%{EndTimestamp}" } }
+  }
+  date {
+    match => [ "Timestamp", "ISO8601", "yyyy-MM-dd HH:mm:ss,SSS" ]
+    target => "Timestamp"
+  }
+
+  mutate {
+    remove_field => ["DuplicateRequestID", "Unknown1", "Unknown2", "Unknown3", "Unknown4", "Unknown5", "Unknown6", "Unknown7", "Unknown8"]
+  }
+
+  if ([source] == "/var/log/onap/sdc/sdc-be/audit.log") {
+    #Parse kvps in message
+    kv {
+      field_split => "\s"
+      trim_key => "\s"
+      trim_value => "\s"
+    }
+
+    #If Request Id is missing and DID is present use as RequestId
+    if (![RequestId] and [DID] =~ /.+/) {
+      mutate { add_field => { "RequestId" => "%{DID}" } }
+    }
+  }
+
+ } #Close else statement for logback events
+} #Close filter
+
+
+output {
+ elasticsearch {
+ id => 'onap_es'
+
+ ######### Security configurations #########
+
+ user => "elastic"
+ password => "changeme"
+
+ ## The .cer or .pem file to validate the server's certificate
+ #cacert => $es_cacert
+
+ ## The keystore used to present a certificate to the server. It can be either .jks or .p12
+ #keystore => $es_keystore
+ #keystore_password => $es_keystore_password
+
+ ## Enable SSL/TLS secured communication to Elasticsearch cluster.
+ ## Default is not set which in that case depends on the protocol specidfied in hosts list
+ #ssl => $es_ssl
+
+ ## Option to validate the server's certificate. Default is true
+ #ssl_certificate_verification => $es_ssl_certificate_verification
+
+ ## The JKS truststore to validate the server's certificate.
+ #truststore => $es_truststore
+ #truststore_password => $es_truststore_password
+
+
+ ######### Elasticsearchcluster and host configurations #########
+
+ ##can specify one or a list of hosts. If sniffing is set, one is enough and others will be auto-discovered
+ hosts => ["http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}:{{.Values.config.elasticsearchPort}}"]
+
+
+ ## This setting asks Elasticsearch for the list of all cluster nodes and adds them to the hosts list. Default is false.
+ sniffing => true
+
+ ## How long to wait, in seconds, between sniffing attempts. Default is 5 seconds.
+ #sniffing_delay => 5
+
+ ## Set the address of a forward HTTP proxy.
+ #proxy => $es_proxy
+
+ ##Use this if you must run Elasticsearch behind a proxy that remaps the root path for the Elasticsearch HTTP API lives
+ #path => $es_path
+
+ ######### Elasticsearch request configurations #########
+
+ ## This setting defines the maximum sized bulk request Logstash will make.
+ #flush_size => ?
+
+ ######### Document configurations #########
+
+ index => "logstash-%{+YYYY.MM.dd}"
+ document_type => "logs"
+
+ ## This can be used to associate child documents with a parent using the parent ID.
+ #parent => "abcd'
+ }
+}
+
diff --git a/kubernetes/log/components/log-logstash/templates/NOTES.txt b/kubernetes/log/components/log-logstash/templates/NOTES.txt
new file mode 100644
index 0000000..f115eb6
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/log/components/log-logstash/templates/configmap.yaml b/kubernetes/log/components/log-logstash/templates/configmap.yaml
new file mode 100644
index 0000000..3e98246
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/templates/configmap.yaml
@@ -0,0 +1,29 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/log/components/log-logstash/templates/deployment.yaml b/kubernetes/log/components/log-logstash/templates/deployment.yaml
new file mode 100644
index 0000000..566c7a3
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/templates/deployment.yaml
@@ -0,0 +1,102 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ include "common.release" . }}
+    spec:
+      initContainers:
+      - command:
+        - /app/ready.py
+        args:
+        - --container-name
+        - log-elasticsearch
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: {{ include "repositoryGenerator.image.readiness" . }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: {{ include "repositoryGenerator.elasticRepository" . }}/{{ .Values.image }}
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          resources:
+{{ include "common.resources" . | indent 12 }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ .Values.service.name }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+            name: {{ .Values.service.name2 }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/logstash/config/
+            name: {{ include "common.fullname" . }}-config
+          - mountPath: /usr/share/logstash/pipeline/
+            name: {{ include "common.fullname" . }}-pipeline
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: logstash.yml
+              path: logstash.yml
+        - name: {{ include "common.fullname" . }}-pipeline
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: onap-pipeline.conf
+              path: onap-pipeline.conf
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/log/components/log-logstash/templates/ingress.yaml b/kubernetes/log/components/log-logstash/templates/ingress.yaml
new file mode 100644
index 0000000..8f87c68
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/templates/ingress.yaml
@@ -0,0 +1 @@
+{{ include "common.ingress" . }}
diff --git a/kubernetes/log/components/log-logstash/templates/service.yaml b/kubernetes/log/components/log-logstash/templates/service.yaml
new file mode 100644
index 0000000..7736f0c
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/templates/service.yaml
@@ -0,0 +1,70 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name2 }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ include "common.release" . }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type2 }}
+  ports:
+    {{if eq .Values.service.type2 "NodePort" -}}
+    - port: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.service.name2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.service.name2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ include "common.release" . }}
diff --git a/kubernetes/log/components/log-logstash/values.yaml b/kubernetes/log/components/log-logstash/values.yaml
new file mode 100644
index 0000000..7a0674c
--- /dev/null
+++ b/kubernetes/log/components/log-logstash/values.yaml
@@ -0,0 +1,102 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  persistence: {}
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# application image
+image: logstash/logstash:5.4.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  elasticsearchServiceName: log-es
+  elasticsearchPort: 9200
+
+# default number of instances
+# 30+ logs/sec will saturate a single node to 6+ vCores
+replicaCount: 3
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  #Example service definition with external, internal and node ports.
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: NodePort
+  name: log-ls
+  externalPort: 5044
+  internalPort: 5044
+  nodePort: 55
+  type2: ClusterIP
+  name2: log-ls-http
+  externalPort2: 9600
+  internalPort2: 9600
+ingress:
+  enabled: false
+  service:
+    - baseaddr: "logls"
+      name: "log-ls"
+      port: 5044
+    - baseaddr: "loglshttp"
+      name: "log-ls"
+      port: 9600
+  config:
+    ssl: "none"
+
+# Resource Limit flavor -By Default using small
+flavor: small
+# Segregation for Different environment (Small and Large)
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 2Gi
+    requests:
+      cpu: 0.5
+      memory: 1Gi
+  large:
+    limits:
+      cpu: 2
+      memory: 4Gi
+    requests:
+      cpu: 2
+      memory: 4Gi
+  unlimited: {}