Add DCAE healthcheck
Change-Id: Icd3839ae7570547550cf9a3df3a129181f187f24
Issue-ID: DCAEGEN2-461
Signed-off-by: Jack Lucas <jflucas@research.att.com>
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml
new file mode 100644
index 0000000..770f82d
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/Chart.yaml
@@ -0,0 +1,21 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+description: ONAP DCAE Health Check
+name: dcae-healtcheck
+version: 2.0.0
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml
new file mode 100644
index 0000000..d031e2e
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/requirements.yaml
@@ -0,0 +1,22 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml
new file mode 100644
index 0000000..2166ca9
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/deployment.yaml
@@ -0,0 +1,65 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 1
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: DCAE_NAMESPACE
+ value: {{ .Values.dcae_ns }}
+ - name: ONAP_NAMESPACE
+ value: {{ include "common.namespace" . }}
+ - name: HELM_RELEASE
+ value: {{ .Release.Name }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml
new file mode 100644
index 0000000..0540534
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/templates/service.yaml
@@ -0,0 +1,45 @@
+#============LICENSE_START========================================================
+# ================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ #Example internal target port if required
+ #targetPort: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
new file mode 100644
index 0000000..a4d2f29
--- /dev/null
+++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml
@@ -0,0 +1,54 @@
+#============LICENSE_START========================================================
+#=================================================================================
+# Copyright (c) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright © 2018 Amdocs, Bell Canada
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiZGNhZUBkY2FlLm9uYXAub3JnIiwiYXV0aCI6IlpHOWphMlZ5T21SdlkydGxjZz09In19
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.1.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+service:
+ name: dcae-healthcheck
+ internalPort: 80
+ externalPort: 80
+ type: ClusterIP
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+# application image
+repository: nexus3.onap.org:10001
+image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.0.0
+
+# Kubernetes namespace for components deployed via Cloudify manager
+# If empty, use the common namespace
+dcae_ns: "dcae"
+