DMaaP Data Router integration into OOM
Issue-ID: OOM-1349
Change-Id: I86ced2f180f1cf0fcb753125466a5535e93b1dce
Signed-off-by: Fiachra Corcoran <fiachra.corcoran@ericsson.com>
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/.helmignore
new file mode 100644
index 0000000..f0c1319
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml
new file mode 100644
index 0000000..07de3be
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP DMaaP Data Router
+name: dmaap-data-router
+version: 1.0
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore
new file mode 100644
index 0000000..f0c1319
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml
new file mode 100644
index 0000000..9e4a05d
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: DMaaP Data Router MariaDB Instance
+name: dmaap-dr-db
+version: 1.0
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf
new file mode 100644
index 0000000..ff2c637
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/conf.d/mariadb1.cnf
@@ -0,0 +1,193 @@
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user = root
+##port = 3306
+##socket = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 300
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+# the syntax is:
+#
+# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+# where you replace <host>, <user>, <password> by quoted strings and
+# <port> by the master's port number (3306 by default).
+#
+# Example:
+#
+# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+# MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+# start replication for the first time (even unsuccessfully, for example
+# if you mistyped the password in master-password and the slave fails to
+# connect), the slave will create a master.info file, and any later
+# change in this file to the variables' values below will be ignored and
+# overridden by the content of the master.info file, unless you shutdown
+# the slave server, delete master.info and restart the slaver server.
+# For that reason, you may want to leave the lines below untouched
+# (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id = 2
+#
+# The replication master for this slave - required
+#master-host = <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user = <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password = <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port = <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+#innodb_buffer_pool_size = 6380M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 150M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=1G; gcache.page_size=1G"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://"
+#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb1"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=ON
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
+
+general_log_file = /var/log/mysql/mysql.log
+general_log = 1
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql
new file mode 100644
index 0000000..e7fade9
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql
@@ -0,0 +1,144 @@
+USE `datarouter`;
+
+CREATE TABLE FEEDS (
+ FEEDID INT UNSIGNED NOT NULL PRIMARY KEY,
+ GROUPID INT(10) UNSIGNED NOT NULL DEFAULT 0,
+ NAME VARCHAR(255) NOT NULL,
+ VERSION VARCHAR(20) NOT NULL,
+ DESCRIPTION VARCHAR(1000),
+ BUSINESS_DESCRIPTION VARCHAR(1000) DEFAULT NULL,
+ AUTH_CLASS VARCHAR(32) NOT NULL,
+ PUBLISHER VARCHAR(8) NOT NULL,
+ SELF_LINK VARCHAR(256),
+ PUBLISH_LINK VARCHAR(256),
+ SUBSCRIBE_LINK VARCHAR(256),
+ LOG_LINK VARCHAR(256),
+ DELETED BOOLEAN DEFAULT FALSE,
+ LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
+ SUSPENDED BOOLEAN DEFAULT FALSE,
+ CREATED_DATE TIMESTAMP DEFAULT CURRENT_TIMESTAMP
+);
+
+CREATE TABLE FEED_ENDPOINT_IDS (
+ FEEDID INT UNSIGNED NOT NULL,
+ USERID VARCHAR(20) NOT NULL,
+ PASSWORD VARCHAR(32) NOT NULL
+);
+
+CREATE TABLE FEED_ENDPOINT_ADDRS (
+ FEEDID INT UNSIGNED NOT NULL,
+ ADDR VARCHAR(44) NOT NULL
+);
+
+CREATE TABLE SUBSCRIPTIONS (
+ SUBID INT UNSIGNED NOT NULL PRIMARY KEY,
+ FEEDID INT UNSIGNED NOT NULL,
+ GROUPID INT(10) UNSIGNED NOT NULL DEFAULT 0,
+ DELIVERY_URL VARCHAR(256),
+ DELIVERY_USER VARCHAR(20),
+ DELIVERY_PASSWORD VARCHAR(32),
+ DELIVERY_USE100 BOOLEAN DEFAULT FALSE,
+ METADATA_ONLY BOOLEAN DEFAULT FALSE,
+ SUBSCRIBER VARCHAR(8) NOT NULL,
+ SELF_LINK VARCHAR(256),
+ LOG_LINK VARCHAR(256),
+ LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
+ SUSPENDED BOOLEAN DEFAULT FALSE,
+ CREATED_DATE TIMESTAMP DEFAULT CURRENT_TIMESTAMP
+
+);
+
+CREATE TABLE PARAMETERS (
+ KEYNAME VARCHAR(32) NOT NULL PRIMARY KEY,
+ VALUE VARCHAR(4096) NOT NULL
+);
+
+CREATE TABLE LOG_RECORDS (
+ TYPE ENUM('pub', 'del', 'exp', 'pbf', 'dlx') NOT NULL,
+ EVENT_TIME BIGINT NOT NULL, /* time of the publish request */
+ PUBLISH_ID VARCHAR(64) NOT NULL, /* unique ID assigned to this publish attempt */
+ FEEDID INT UNSIGNED NOT NULL, /* pointer to feed in FEEDS */
+ REQURI VARCHAR(256) NOT NULL, /* request URI */
+ METHOD ENUM('DELETE', 'GET', 'HEAD', 'OPTIONS', 'PUT', 'POST', 'TRACE') NOT NULL, /* HTTP method */
+ CONTENT_TYPE VARCHAR(256) NOT NULL, /* content type of published file */
+ CONTENT_LENGTH BIGINT NOT NULL, /* content length of published file */
+
+ FEED_FILEID VARCHAR(256), /* file ID of published file */
+ REMOTE_ADDR VARCHAR(40), /* IP address of publishing endpoint */
+ USER VARCHAR(50), /* user name of publishing endpoint */
+ STATUS SMALLINT, /* status code returned to delivering agent */
+
+ DELIVERY_SUBID INT UNSIGNED, /* pointer to subscription in SUBSCRIPTIONS */
+ DELIVERY_FILEID VARCHAR(256), /* file ID of file being delivered */
+ RESULT SMALLINT, /* result received from subscribing agent */
+
+ ATTEMPTS INT, /* deliveries attempted */
+ REASON ENUM('notRetryable', 'retriesExhausted', 'diskFull', 'other'),
+
+ RECORD_ID BIGINT UNSIGNED NOT NULL PRIMARY KEY, /* unique ID for this record */
+ CONTENT_LENGTH_2 BIGINT,
+
+ INDEX (FEEDID) USING BTREE,
+ INDEX (DELIVERY_SUBID) USING BTREE,
+ INDEX (RECORD_ID) USING BTREE
+) ENGINE = MyISAM;
+
+CREATE TABLE INGRESS_ROUTES (
+ SEQUENCE INT UNSIGNED NOT NULL,
+ FEEDID INT UNSIGNED NOT NULL,
+ USERID VARCHAR(20),
+ SUBNET VARCHAR(44),
+ NODESET INT UNSIGNED NOT NULL
+);
+
+CREATE TABLE EGRESS_ROUTES (
+ SUBID INT UNSIGNED NOT NULL PRIMARY KEY,
+ NODEID INT UNSIGNED NOT NULL
+);
+
+CREATE TABLE NETWORK_ROUTES (
+ FROMNODE INT UNSIGNED NOT NULL,
+ TONODE INT UNSIGNED NOT NULL,
+ VIANODE INT UNSIGNED NOT NULL
+);
+
+CREATE TABLE NODESETS (
+ SETID INT UNSIGNED NOT NULL,
+ NODEID INT UNSIGNED NOT NULL
+);
+
+CREATE TABLE NODES (
+ NODEID INT UNSIGNED NOT NULL PRIMARY KEY,
+ NAME VARCHAR(255) NOT NULL,
+ ACTIVE BOOLEAN DEFAULT TRUE
+);
+
+CREATE TABLE GROUPS (
+ GROUPID INT UNSIGNED NOT NULL PRIMARY KEY,
+ AUTHID VARCHAR(100) NOT NULL,
+ NAME VARCHAR(50) NOT NULL,
+ DESCRIPTION VARCHAR(255),
+ CLASSIFICATION VARCHAR(20) NOT NULL,
+ MEMBERS TINYTEXT,
+ LAST_MOD TIMESTAMP DEFAULT CURRENT_TIMESTAMP
+);
+
+INSERT INTO PARAMETERS VALUES
+ ('ACTIVE_POD', '{{.Values.global.config.dmaapDrProv.name}}'),
+ ('PROV_ACTIVE_NAME', '{{.Values.global.config.dmaapDrProv.name}}'),
+ ('STANDBY_POD', ''),
+ ('PROV_NAME', '{{.Values.global.config.dmaapDrProv.name}}'),
+ ('NODES', '{{.Values.global.config.dmaapDrNode.name}}'),
+ ('PROV_DOMAIN', '{{ include "common.namespace" . }}'),
+ ('DELIVERY_INIT_RETRY_INTERVAL', '10'),
+ ('DELIVERY_MAX_AGE', '86400'),
+ ('DELIVERY_MAX_RETRY_INTERVAL', '3600'),
+ ('DELIVERY_RETRY_RATIO', '2'),
+ ('LOGROLL_INTERVAL', '300'),
+ ('PROV_AUTH_ADDRESSES', '{{.Values.global.config.dmaapDrProv.name}}|{{.Values.global.config.dmaapDrNode.name}}'),
+ ('PROV_AUTH_SUBJECTS', ''),
+ ('PROV_MAXFEED_COUNT', '10000'),
+ ('PROV_MAXSUB_COUNT', '100000'),
+ ('PROV_REQUIRE_CERT', 'false'),
+ ('PROV_REQUIRE_SECURE', 'false'),
+ ('_INT_VALUES', 'LOGROLL_INTERVAL|PROV_MAXFEED_COUNT|PROV_MAXSUB_COUNT|DELIVERY_INIT_RETRY_INTERVAL|DELIVERY_MAX_RETRY_INTERVAL|DELIVERY_RETRY_RATIO|DELIVERY_MAX_AGE');
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt
new file mode 100644
index 0000000..7187941
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.global.config.mariadb.servicetype }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.global.config.mariadb.servicetype }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{.Values.global.config.mariadb.externalPort}}
+{{- else if contains "ClusterIP" .Values.global.config.mariadb.servicetype }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{.Values.global.config.mariadb.internalPort}}
+{{- end }}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml
new file mode 100644
index 0000000..6cef506
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/configmap.yaml
@@ -0,0 +1,29 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-mdb-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-mdb-initd-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/sql_init_01.sql").AsConfig . | indent 2 }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml
new file mode 100644
index 0000000..6b19804
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/deployment.yaml
@@ -0,0 +1,107 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{.Values.global.config.mariadb.internalPort}}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ args:
+ - --lower-case-table-names=1
+ - --wait_timeout=28800
+ livenessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.mariadb.internalPort}}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.mariadb.internalPort}}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: MYSQL_ROOT_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-secret
+ key: db-root-password
+ - name: MYSQL_USER
+ value: {{.Values.global.config.mariadb.userName}}
+ - name: MYSQL_DATABASE
+ value: {{.Values.global.config.mariadb.mysqlDatabase}}
+ - name: MYSQL_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}-secret
+ key: db-user-password
+ volumeMounts:
+ - mountPath: /docker-entrypoint-initdb.d/sql_init_01.sql
+ name: docker-entrypoint-initdb
+ subPath: sql_init_01.sql
+ - mountPath: /etc/mysql/conf.d
+ name: mariadb-conf
+ - mountPath: /var/lib/mysql
+ name: mariadb-data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: docker-entrypoint-initdb
+ configMap:
+ name: {{ include "common.fullname" . }}-mdb-initd-configmap
+ - name: mariadb-conf
+ configMap:
+ name: {{ include "common.fullname" . }}-mdb-configmap
+ - name: mariadb-data
+ {{- if .Values.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml
new file mode 100644
index 0000000..da117f4
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pv.yaml
@@ -0,0 +1,37 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml
new file mode 100644
index 0000000..e27c331
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/pvc.yaml
@@ -0,0 +1,48 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+{{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml
new file mode 100644
index 0000000..bc93b9e
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/secrets.yaml
@@ -0,0 +1,28 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ include "common.fullname" . }}-secret
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+type: Opaque
+data:
+ db-root-password: {{ .Values.global.config.mariadb.mariadbRootPassword | b64enc | quote }}
+ db-user-password: {{ .Values.global.config.mariadb.userPassword | b64enc | quote }}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml
new file mode 100644
index 0000000..53fed46
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/templates/service.yaml
@@ -0,0 +1,38 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{.Values.global.config.mariadb.name}}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{.Values.global.config.mariadb.servicetype}}
+ ports:
+ {{if eq .Values.global.config.mariadb.servicetype "NodePort" -}}
+ - port: {{.Values.global.config.mariadb.internalPort}}
+ nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }}
+ {{- else -}}
+ - port: {{.Values.global.config.mariadb.externalPort}}
+ targetPort: {{.Values.global.config.mariadb.internalPort}}
+ {{- end}}
+ name: {{.Values.global.config.mariadb.name}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml
new file mode 100644
index 0000000..cf61c49
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-db/values.yaml
@@ -0,0 +1,79 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+global: # global defaults
+ persistence: {}
+
+# application image
+repository: nexus3.onap.org:10001
+image: mariadb:10.2.14
+pullPolicy: Always
+
+# application configuration - see parent values chart
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+ volumeReclaimPolicy: Retain
+ accessMode: ReadWriteMany
+ size: 1Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: dmaap/dr-db/data
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore
new file mode 100644
index 0000000..f0c1319
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml
new file mode 100644
index 0000000..084aa58
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP DMaaP Data Router Node Server
+name: dmaap-dr-node
+version: 1.0
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh
new file mode 100644
index 0000000..a6a829a
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/createFeed.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+dr_prov_url="{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.internalPort2}}"
+ct_header="Content-Type:application/vnd.att-dr.feed"
+obo_header="X-ATT-DR-ON-BEHALF-OF:dradmin"
+feed_payload=/opt/app/datartr/etc/dedicatedFeed.json
+
+sleep 20
+
+if curl -k https://${dr_prov_url}/internal/prov | awk 'BEGIN{ORS=""} {print}' | egrep "\"feeds\":\s+\[\]"; then
+ curl -X POST -H ${ct_header} -H ${obo_header} --data-ascii @${feed_payload} --post301 --location-trusted -k https://${dr_prov_url};
+else
+ echo "NO feed creation required";
+fi
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json
new file mode 100644
index 0000000..a96f46d
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/feeds/dedicatedFeed.json
@@ -0,0 +1,18 @@
+{
+ "name": "Default PM Feed",
+ "version": "m1.0",
+ "description": "Default feed provisioned for PM File collector",
+ "business_description": "Default Feed",
+ "suspend": false,
+ "deleted": false,
+ "changeowner": true,
+ "authorization": {
+ "classification": "unclassified",
+ "endpoint_addrs": [],
+ "endpoint_ids": [
+ {
+ "password": "dradmin",
+ "id": "dradmin"
+ }]
+ }
+}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties
new file mode 100644
index 0000000..41062c7
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/resources/config/node.properties
@@ -0,0 +1,111 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==================================================
+# * org.onap.dmaap
+# * ===========================================================================
+# * Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# * ===========================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# * http://www.apache.org/licenses/LICENSE-2.0
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END====================================================
+# *
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# *
+#-------------------------------------------------------------------------------
+#
+# Configuration parameters fixed at startup for the DataRouter node
+#
+# URL to retrieve dynamic configuration
+#
+#ProvisioningURL: ${DRTR_PROV_INTURL}
+ProvisioningURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/prov
+
+#
+# URL to upload PUB/DEL/EXP logs
+#
+#LogUploadURL: ${DRTR_LOG_URL}
+LogUploadURL=https://{{.Values.global.config.dmaapDrProv.name}}:{{.Values.global.config.dmaapDrProv.externalPort2}}/internal/logs
+
+#
+# The port number for http as seen within the server
+#
+#IntHttpPort: ${DRTR_NODE_INTHTTPPORT:-8080}
+IntHttpPort={{.Values.global.config.dmaapDrNode.internalPort}}
+#
+# The port number for https as seen within the server
+#
+IntHttpsPort={{.Values.global.config.dmaapDrNode.internalPort2}}
+#
+# The external port number for https taking port mapping into account
+#
+ExtHttpsPort=443
+#
+# The minimum interval between fetches of the dynamic configuration
+# from the provisioning server
+#
+MinProvFetchInterval=10000
+#
+# The minimum interval between saves of the redirection data file
+#
+MinRedirSaveInterval=10000
+#
+# The path to the directory where log files are stored
+#
+LogDir=/opt/app/datartr/logs
+#
+# The retention interval (in days) for log files
+#
+LogRetention=30
+#
+# The path to the directories where data and meta data files are stored
+#
+SpoolDir=/opt/app/datartr/spool
+#
+# The path to the redirection data file
+#
+#RedirectionFile: etc/redirections.dat
+#
+# The type of keystore for https
+#
+KeyStoreType=jks
+#
+# The path to the keystore for https
+#
+KeyStoreFile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+#
+# The password for the https keystore
+#
+KeyStorePassword=4*&GD+w58RUM]01No.CYY;z6
+#
+# The password for the private key in the https keystore
+#
+KeyPassword=4*&GD+w58RUM]01No.CYY;z6
+#
+# The type of truststore for https
+#
+TrustStoreType=jks
+#
+# The path to the truststore for https
+#
+TrustStoreFile=/opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+#
+# The password for the https truststore
+#
+TrustStorePassword=UDXlT6Iu[F)k,Htk92+B,0Xj
+#
+# The path to the file used to trigger an orderly shutdown
+#
+QuiesceFile=etc/SHUTDOWN
+#
+# The key used to generate passwords for node to node transfers
+#
+NodeAuthKey=Node123!
+
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt
new file mode 100644
index 0000000..42d7663
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.global.config.dmaapDrNode.servicetype }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrNode.servicetype }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrNode.externalPort}}
+{{- else if contains "ClusterIP" .Values.global.config.dmaapDrNode.servicetype }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrNode.internalPort}}
+{{- end }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml
new file mode 100644
index 0000000..0124f4d
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/configmap.yaml
@@ -0,0 +1,29 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-node-props-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/node.properties").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-create-feed-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/feeds/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml
new file mode 100644
index 0000000..2aae2d0
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/deployment.yaml
@@ -0,0 +1,114 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ hostname: {{.Values.global.config.dmaapDrNode.name}}
+ initContainers:
+ - name: {{ include "common.name" . }}-readiness
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{.Values.global.config.dmaapDrProv.name}}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{.Values.global.config.dmaapDrNode.externalPort}}
+ - containerPort: {{.Values.global.config.dmaapDrNode.externalPort2}}
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.dmaapDrNode.internalPort}}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.dmaapDrNode.internalPort}}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: false
+ - mountPath: /opt/app/datartr/etc/dedicatedFeed.json
+ subPath: dedicatedFeed.json
+ name: create-feed
+ - mountPath: /opt/app/datartr/etc/createFeed.sh
+ subPath: createFeed.sh
+ name: create-feed
+ - mountPath: /opt/app/datartr/etc/node.properties
+ subPath: node.properties
+ name: node-props
+ lifecycle:
+ postStart:
+ exec:
+ command:
+ - /opt/app/datartr/etc/createFeed.sh
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: create-feed
+ configMap:
+ name: {{ include "common.fullname" . }}-create-feed-configmap
+ defaultMode: 0755
+ - name: node-props
+ configMap:
+ name: {{ include "common.fullname" . }}-node-props-configmap
+ - name: dr-node-data
+ {{- if .Values.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml
new file mode 100644
index 0000000..e13e854
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/templates/service.yaml
@@ -0,0 +1,49 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{.Values.global.config.dmaapDrNode.name}}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
+spec:
+ type: {{.Values.global.config.dmaapDrNode.servicetype}}
+ ports:
+ {{if eq .Values.global.config.dmaapDrNode.servicetype "NodePort" -}}
+ - port: {{.Values.global.config.dmaapDrNode.externalPort}}
+ targetPort: {{.Values.global.config.dmaapDrNode.internalPort}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort}}
+ name: {{.Values.global.config.dmaapDrNode.name}}
+ - port: {{.Values.global.config.dmaapDrNode.externalPort2}}
+ targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrNode.nodePort2}}
+ name: {{.Values.global.config.dmaapDrNode.name}}2
+ {{- else -}}
+ - port: {{.Values.global.config.dmaapDrNode.externalPort}}
+ targetPort: {{.Values.global.config.dmaapDrNode.internalPort}}
+ name: {{.Values.global.config.dmaapDrNode.name}}
+ - port: {{.Values.global.config.dmaapDrNode.externalPort2}}
+ targetPort: {{.Values.global.config.dmaapDrNode.internalPort2}}
+ name: {{.Values.global.config.dmaapDrNode.name}}2
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml
new file mode 100644
index 0000000..272f653
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-node/values.yaml
@@ -0,0 +1,80 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dmaap/datarouter-node
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration - see parent values chart
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: false
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore
new file mode 100644
index 0000000..f0c1319
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/.helmignore
@@ -0,0 +1,21 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml
new file mode 100644
index 0000000..591e9e0
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP DMaaP Data Router Provisioning Server
+name: dmaap-dr-prov
+version: 1.0
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties
new file mode 100644
index 0000000..6bde746
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/resources/config/provserver.properties
@@ -0,0 +1,49 @@
+#-------------------------------------------------------------------------------
+# ============LICENSE_START==================================================
+# * org.onap.dmaap
+# * ===========================================================================
+# * Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# * ===========================================================================
+# * Licensed under the Apache License, Version 2.0 (the "License");
+# * you may not use this file except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# * http://www.apache.org/licenses/LICENSE-2.0
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# * ============LICENSE_END====================================================
+# *
+# * ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# *
+#-------------------------------------------------------------------------------
+
+
+#Jetty Server properties
+org.onap.dmaap.datarouter.provserver.http.port = {{.Values.global.config.dmaapDrProv.externalPort}}
+org.onap.dmaap.datarouter.provserver.https.port = {{.Values.global.config.dmaapDrProv.externalPort2}}
+org.onap.dmaap.datarouter.provserver.https.relaxation = true
+
+org.onap.dmaap.datarouter.provserver.keymanager.password = Qgw77oaQcdP*F8Pwa[&.,.Ab
+org.onap.dmaap.datarouter.provserver.keystore.type = jks
+org.onap.dmaap.datarouter.provserver.keystore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.jks
+org.onap.dmaap.datarouter.provserver.keystore.password = Qgw77oaQcdP*F8Pwa[&.,.Ab
+org.onap.dmaap.datarouter.provserver.truststore.path = /opt/app/datartr/aaf_certs/org.onap.dmaap-dr.trust.jks
+org.onap.dmaap.datarouter.provserver.truststore.password = 9M?)?:KAj1z6gpLhNrVUG@0T
+org.onap.dmaap.datarouter.provserver.accesslog.dir = /opt/app/datartr/logs
+org.onap.dmaap.datarouter.provserver.spooldir = /opt/app/datartr/spool
+org.onap.dmaap.datarouter.provserver.dbscripts = /opt/app/datartr/etc/misc
+org.onap.dmaap.datarouter.provserver.logretention = 30
+
+#DMAAP-597 (Tech Dept) REST request source IP auth
+# relaxation to accommodate OOM kubernetes deploy
+org.onap.dmaap.datarouter.provserver.isaddressauthenabled = false
+
+# Database access
+org.onap.dmaap.datarouter.db.driver = org.mariadb.jdbc.Driver
+org.onap.dmaap.datarouter.db.url = jdbc:mariadb://{{.Values.global.config.mariadb.name}}:{{.Values.global.config.mariadb.externalPort}}/datarouter
+org.onap.dmaap.datarouter.db.login = datarouter
+org.onap.dmaap.datarouter.db.password = datarouter
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt
new file mode 100644
index 0000000..64e6abf
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.global.config.dmaapDrProv.servicetype }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.global.config.dmaapDrProv.servicetype }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{.Values.global.config.dmaapDrProv.externalPort}}
+{{- else if contains "ClusterIP" .Values.global.config.dmaapDrProv.servicetype }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{.Values.global.config.dmaapDrProv.internalPort}}
+{{- end }}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml
new file mode 100644
index 0000000..c8adab4
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/configmap.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-prov-props-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/provserver.properties").AsConfig . | indent 2 }}
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml
new file mode 100644
index 0000000..d956581
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/deployment.yaml
@@ -0,0 +1,99 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ hostname: {{.Values.global.config.dmaapDrProv.name}}
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{.Values.global.config.mariadb.name}}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{.Values.global.config.dmaapDrProv.externalPort}}
+ - containerPort: {{.Values.global.config.dmaapDrProv.externalPort2}}
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: false
+ - mountPath: /opt/app/datartr/etc/provserver.properties
+ subPath: provserver.properties
+ name: prov-props
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: prov-props
+ configMap:
+ name: {{ include "common.fullname" . }}-prov-props-configmap
+ - name: dr-prov-data
+ {{- if .Values.persistence.enabled }}
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml
new file mode 100644
index 0000000..15059c6
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/templates/service.yaml
@@ -0,0 +1,60 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{.Values.global.config.dmaapDrProv.name}}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "{{.Values.global.config.dmaapDrProv.name}}",
+ "version": "v1",
+ "url": "/",
+ "protocol": "REST",
+ "port": "{{.Values.global.config.dmaapDrProv.externalPort}}",
+ "visualRange":"1"
+ }
+ ]'
+
+spec:
+ type: {{.Values.global.config.dmaapDrProv.servicetype}}
+ ports:
+ {{if eq .Values.global.config.dmaapDrProv.servicetype "NodePort" -}}
+ - port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ targetPort: {{.Values.global.config.dmaapDrProv.internalPort}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort}}
+ name: {{.Values.global.config.dmaapDrProv.name}}
+ - port: {{.Values.global.config.dmaapDrProv.externalPort2}}
+ targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{.Values.global.config.dmaapDrProv.nodePort2}}
+ name: {{.Values.global.config.dmaapDrProv.name}}2
+ {{- else -}}
+ - port: {{.Values.global.config.dmaapDrProv.externalPort}}
+ targetPort: {{.Values.global.config.dmaapDrProv.internalPort}}
+ name: {{.Values.global.config.dmaapDrProv.name}}
+ - port: {{.Values.global.config.dmaapDrProv.externalPort2}}
+ targetPort: {{.Values.global.config.dmaapDrProv.internalPort2}}
+ name: {{.Values.global.config.dmaapDrProv.name}}2
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml
new file mode 100644
index 0000000..9b237b5
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/charts/dmaap-dr-prov/values.yaml
@@ -0,0 +1,81 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/dmaap/datarouter-prov
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration - see parent values chart
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 30
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: false
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
\ No newline at end of file
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml b/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml
new file mode 100644
index 0000000..480e9e3
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ repository: '@local'
+
diff --git a/kubernetes/dmaap/charts/dmaap-data-router/values.yaml b/kubernetes/dmaap/charts/dmaap-data-router/values.yaml
new file mode 100644
index 0000000..7f29f93
--- /dev/null
+++ b/kubernetes/dmaap/charts/dmaap-data-router/values.yaml
@@ -0,0 +1,58 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# DMaap Data Router Global config defaults.
+#################################################################
+global:
+ persistence: {}
+ env:
+ name: AUTO
+ ubuntuInitRepository: oomk8s
+ ubuntuInitImage: ubuntu-init:1.0.0
+
+ config:
+# dr db configuration
+ mariadb:
+ servicetype: ClusterIP
+ name: dmaap-dr-db
+ portName: dr-db-port
+ internalPort: 3306
+ externalPort: 3306
+ mariadbRootPassword: datarouter
+ userName: datarouter
+ userPassword: datarouter
+ mysqlDatabase: datarouter
+# dr provisioning server configuration
+ dmaapDrProv:
+ servicetype: NodePort
+ name: dmaap-dr-prov
+ externalPort: 8080
+ externalPort2: 8443
+ internalPort: 8080
+ internalPort2: 8443
+ portName: dr-prov-port
+ portName2: dr-prov-port2
+ nodePort: 59
+ nodePort2: 69
+# dr node server configuration
+ dmaapDrNode:
+ servicetype: ClusterIP
+ name: dmaap-dr-node
+ externalPort: 8080
+ internalPort: 8080
+ externalPort2: 8443
+ internalPort2: 8443
+ portName: dr-node-port
+ portName2: dr-node-port2