Add Standardized Configuration to POLICY
Change-Id: Iabdb2bba14b5095c08ff2920aec97a213e0acb30
Issue-ID: OOM-745
Signed-off-by: mayankg2703 <mayank.gupta@amdocs.com>
Signed-off-by: Mike Elliott <mike.elliott@amdocs.com>
Signed-off-by: Mandeep Khinda <mandeep.khinda@amdocs.com>
diff --git a/kubernetes/policy/charts/drools/Chart.yaml b/kubernetes/policy/charts/drools/Chart.yaml
new file mode 100644
index 0000000..4f753c0
--- /dev/null
+++ b/kubernetes/policy/charts/drools/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Drools Policy Engine
+name: drools
+version: 2.0.0
diff --git a/kubernetes/policy/charts/drools/charts/nexus/Chart.yaml b/kubernetes/policy/charts/drools/charts/nexus/Chart.yaml
new file mode 100644
index 0000000..65916b6
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Policy Nexus
+name: nexus
+version: 2.0.0
diff --git a/kubernetes/policy/charts/drools/charts/nexus/requirements.yaml b/kubernetes/policy/charts/drools/charts/nexus/requirements.yaml
new file mode 100644
index 0000000..f639633
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/requirements.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
diff --git a/kubernetes/policy/charts/drools/charts/nexus/templates/NOTES.txt b/kubernetes/policy/charts/drools/charts/nexus/templates/NOTES.txt
new file mode 100644
index 0000000..57947a6
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/policy/charts/drools/charts/nexus/templates/deployment.yaml b/kubernetes/policy/charts/drools/charts/nexus/templates/deployment.yaml
new file mode 100644
index 0000000..910ade9
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/templates/deployment.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.global.mariadb.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ httpGet:
+ path: {{ .Values.readiness.path }}
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/policy/charts/drools/charts/nexus/templates/service.yaml b/kubernetes/policy/charts/drools/charts/nexus/templates/service.yaml
new file mode 100644
index 0000000..5447d91
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/templates/service.yaml
@@ -0,0 +1,32 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ ports:
+ - port: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ clusterIP: None
diff --git a/kubernetes/policy/charts/drools/charts/nexus/values.yaml b/kubernetes/policy/charts/drools/charts/nexus/values.yaml
new file mode 100644
index 0000000..f8d80b0
--- /dev/null
+++ b/kubernetes/policy/charts/drools/charts/nexus/values.yaml
@@ -0,0 +1,86 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.0.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/policy-nexus:1.2-SNAPSHOT-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+# username: myusername
+# password: mypassword
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ path: /nexus/service/local/status
+
+service:
+ type: NodePort
+ name: nexus
+ internalPort: 8081
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/policy/charts/drools/requirements.yaml b/kubernetes/policy/charts/drools/requirements.yaml
new file mode 100644
index 0000000..f639633
--- /dev/null
+++ b/kubernetes/policy/charts/drools/requirements.yaml
@@ -0,0 +1,21 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
diff --git a/kubernetes/policy/charts/drools/resources/config/drools/settings.xml b/kubernetes/policy/charts/drools/resources/config/drools/settings.xml
new file mode 100755
index 0000000..e899a00
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/drools/settings.xml
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
+
+<!--
+ <proxies>
+ <proxy>
+ <id>http-proxy</id>
+ <active>true</active>
+ <protocol>http</protocol>
+ <host>fastweb.int.bell.ca</host>
+ <port>80</port>
+ <nonProxyHosts>localhost|127.0.0.1|*.svc.cluster.local|nexus</nonProxyHosts>
+ </proxy>
+ <proxy>
+ <id>https-proxy</id>
+ <active>true</active>
+ <protocol>https</protocol>
+ <host>fastweb.int.bell.ca</host>
+ <port>80</port>
+ <nonProxyHosts>localhost|127.0.0.1|*.svc.cluster.local|nexus</nonProxyHosts>
+ </proxy>
+ </proxies>
+-->
+ <profiles>
+ <profile>
+ <id>policy-profile</id>
+ <activation>
+ <activeByDefault>true</activeByDefault>
+ </activation>
+
+ <repositories>
+ <repository>
+ <id>policy-nexus-snapshots</id>
+ <url>http://{{.Release.Name}}-{{.Values.global.nexus.nameOverride}}:8081/nexus/content/repositories/snapshots/</url>
+ <releases>
+ <enabled>false</enabled>
+ <updatePolicy>always</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>true</enabled>
+ <updatePolicy>always</updatePolicy>
+ </snapshots>
+ </repository>
+
+ <repository>
+ <id>policy-nexus-releases</id>
+ <url>http://{{.Release.Name}}-{{.Values.global.nexus.nameOverride}}:8081/nexus/content/repositories/releases/</url>
+ <releases>
+ <enabled>true</enabled>
+ <updatePolicy>always</updatePolicy>
+ </releases>
+ <snapshots>
+ <enabled>false</enabled>
+ <updatePolicy>always</updatePolicy>
+ </snapshots>
+ </repository>
+ </repositories>
+
+ </profile>
+ </profiles>
+
+ <activeProfiles>
+ <activeProfile>policy-profile</activeProfile>
+ </activeProfiles>
+
+ <servers>
+ <server>
+ <id>policy-nexus-snapshots</id>
+ <username>admin</username>
+ <password>admin123</password>
+ </server>
+ <server>
+ <id>policy-nexus-releases</id>
+ <username>admin</username>
+ <password>admin123</password>
+ </server>
+ </servers>
+
+</settings>
diff --git a/kubernetes/policy/charts/drools/resources/config/log/drools/logback.xml b/kubernetes/policy/charts/drools/resources/config/log/drools/logback.xml
new file mode 100644
index 0000000..4b058f1
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/log/drools/logback.xml
@@ -0,0 +1,103 @@
+<!--
+# Copyright © 2017 Amdocs, Bell Canada,AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<configuration scan="true" scanPeriod="30 seconds" debug="false">
+
+ <property name="logDir" value="/var/log/onap" />
+
+ <property name="errorLog" value="error" />
+ <property name="debugLog" value="debug" />
+ <property name="networkLog" value="network" />
+
+ <property name="debugPattern" value="[%date|%level|%logger{0}|%thread] %msg%n" />
+ <property name="errorPattern" value="${debugPattern}" />
+ <property name="networkPattern" value="[%d|%t]%m%n" />
+
+ <appender name="ErrorOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDir}/${errorLog}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDir}/${errorLog}.%i.log.zip</fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>5</maxIndex>
+ </rollingPolicy>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>WARN</level>
+ </filter>
+ <triggeringPolicy
+ class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>15MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${errorPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="AsyncErrorOut" class="ch.qos.logback.classic.AsyncAppender">
+ <appender-ref ref="ErrorOut" />
+ </appender>
+
+ <appender name="DebugOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDir}/${debugLog}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDir}/${debugLog}.%i.log.zip</fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>20MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${debugPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="AsyncDebugOut" class="ch.qos.logback.classic.AsyncAppender">
+ <appender-ref ref="DebugOut" />
+ </appender>
+
+ <appender name="NetworkOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
+ <file>${logDir}/${networkLog}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+ <fileNamePattern>${logDir}/${networkLog}.%i.log.zip</fileNamePattern>
+ <minIndex>1</minIndex>
+ <maxIndex>9</maxIndex>
+ </rollingPolicy>
+ <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+ <maxFileSize>15MB</maxFileSize>
+ </triggeringPolicy>
+ <encoder>
+ <pattern>${networkPattern}</pattern>
+ </encoder>
+ </appender>
+
+ <appender name="AsyncNetworkOut" class="ch.qos.logback.classic.AsyncAppender">
+ <appender-ref ref="NetworkOut" />
+ </appender>
+
+ <logger name="network" level="INFO" additivity="false">
+ <appender-ref ref="AsyncNetworkOut" />
+ </logger>
+
+ <logger name="org.eclipse.jetty.server.RequestLog" level="info" additivity="false">
+ <appender-ref ref="AsyncNetworkOut" />
+ </logger>
+
+ <root level="INFO">
+ <appender-ref ref="AsyncDebugOut" />
+ <appender-ref ref="AsyncErrorOut" />
+ </root>
+
+</configuration>
diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf
new file mode 100644
index 0000000..aec7bf2
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/base.conf
@@ -0,0 +1,94 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# SYSTEM software configuration
+
+POLICY_HOME=/opt/app/policy
+POLICY_LOGS=/var/log/ONAP/policy
+JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64
+KEYSTORE_PASSWD=PolicyR0ck$
+
+# Telemetry credentials
+
+ENGINE_MANAGEMENT_PORT=9696
+ENGINE_MANAGEMENT_HOST=0.0.0.0
+ENGINE_MANAGEMENT_USER=@1b3rt
+ENGINE_MANAGEMENT_PASSWORD=31nst31n
+
+# nexus repository
+
+snapshotRepositoryID=policy-nexus-snapshots
+snapshotRepositoryUrl=http://{{.Release.Name}}-{{.Values.global.nexus.nameOverride}}:8081/nexus/content/repositories/snapshots/
+releaseRepositoryID=policy-nexus-releases
+releaseRepositoryUrl=http://{{.Release.Name}}-{{.Values.global.nexus.nameOverride}}:8081/nexus/content/repositories/releases/
+repositoryUsername=admin
+repositoryPassword=admin123
+
+# Relational (SQL) DB access
+
+SQL_HOST={{.Release.Name}}-{{.Values.global.mariadb.nameOverride}}
+SQL_USER=policy_user
+SQL_PASSWORD=policy_user
+
+# PDP-D DMaaP configuration channel
+
+PDPD_CONFIGURATION_TOPIC=PDPD-CONFIGURATION
+PDPD_CONFIGURATION_SERVERS=dmaap
+PDPD_CONFIGURATION_API_KEY=
+PDPD_CONFIGURATION_API_SECRET=
+PDPD_CONFIGURATION_CONSUMER_GROUP=
+PDPD_CONFIGURATION_CONSUMER_INSTANCE=
+PDPD_CONFIGURATION_PARTITION_KEY=
+
+# PAP
+
+PAP_HOST={{.Release.Name}}-{{.Values.global.pap.nameOverride}}
+PAP_USERNAME=testpap
+PAP_PASSWORD=alpha123
+
+# PDP-X
+
+PDP_HOST={{.Release.Name}}-{{.Values.global.pdp.nameOverride}}
+PDP_USERNAME=testpdp
+PDP_PASSWORD=alpha123
+PDP_CLIENT_USERNAME=python
+PDP_CLIENT_PASSWORD=test
+PDP_ENVIRONMENT=TEST
+
+# DCAE DMaaP
+
+DCAE_TOPIC=unauthenticated.DCAE_CL_OUTPUT
+DCAE_SERVERS=dmaap
+
+# Open DMaaP
+
+DMAAP_SERVERS=dmaap
+
+# AAI
+
+AAI_URL=https://aai.api.simpledemo.openecomp.org:8443
+AAI_USERNAME=POLICY
+AAI_PASSWORD=POLICY
+
+# MSO
+
+SO_URL=http://mso:8080/ecomp/mso/infra
+SO_USERNAME=InfraPortalClient
+SO_PASSWORD=password1$
+
+# VFC
+
+VFC_URL=
+VFC_USERNAME=
+VFC_PASSWORD=
diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/drools-tweaks.sh b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/drools-tweaks.sh
new file mode 100644
index 0000000..62822ac
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/drools-tweaks.sh
@@ -0,0 +1,17 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#! /bin/bash
+
+${POLICY_HOME}/bin/features enable healthcheck
diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf
new file mode 100644
index 0000000..cbb45a5
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/feature-healthcheck.conf
@@ -0,0 +1,16 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+HEALTHCHECK_USER=healthcheck
+HEALTHCHECK_PASSWORD=zb!XztG34
diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/policy-keystore b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/policy-keystore
new file mode 100644
index 0000000..ab25c3a
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/keys/policy-keystore
Binary files differ
diff --git a/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/policy-management.conf b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/policy-management.conf
new file mode 100644
index 0000000..c2ccefe
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/config/opt/policy/config/drools/policy-management.conf
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+CONTROLLER_ARTIFACT_ID=policy-management
+CONTROLLER_NAME=policy-management-controller
+CONTROLLER_PORT=9696
+RULES_ARTIFACT=not-used:not-used:1.0.0-SNAPSHOT
+UEB_TOPIC=policyengine-develop
diff --git a/kubernetes/policy/charts/drools/resources/scripts/do-start.sh b/kubernetes/policy/charts/drools/resources/scripts/do-start.sh
new file mode 100644
index 0000000..1c40e11
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/scripts/do-start.sh
@@ -0,0 +1,50 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#!/bin/bash
+
+# skip installation if build.info file is present (restarting an existing container)
+if [[ -f /opt/app/policy/etc/build.info ]]; then
+ echo "Found existing installation, will not reinstall"
+ . /opt/app/policy/etc/profile.d/env.sh
+else
+ # replace conf files from installer with environment-specific files
+ # mounted from the hosting VM
+ if [[ -d config ]]; then
+ cp config/*.conf .
+ fi
+
+ ./docker-install.sh
+
+ . /opt/app/policy/etc/profile.d/env.sh
+
+ # install policy keystore
+ mkdir -p $POLICY_HOME/etc/ssl
+ cp config/policy-keystore $POLICY_HOME/etc/ssl
+
+ if [[ -x config/drools-tweaks.sh ]] ; then
+ echo "Executing tweaks"
+ # file may not be executable; running it as an
+ # argument to bash avoids needing execute perms.
+ bash config/drools-tweaks.sh
+ fi
+
+ # sql provisioning scripts should be invoked here.
+fi
+
+echo "Starting processes"
+
+policy start
+
+sleep 1000d
diff --git a/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh b/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh
new file mode 100644
index 0000000..a6c054d
--- /dev/null
+++ b/kubernetes/policy/charts/drools/resources/scripts/update-vfw-op-policy.sh
@@ -0,0 +1,107 @@
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#!/bin/bash
+
+if [ "$#" -ne 4 ]; then
+ echo "Usage: $(basename $0) <k8s-host> <policy-pdp-node-port> <policy-drools-node-port> <resource-id>"
+ exit 1
+fi
+
+K8S_HOST=$1
+POLICY_PDP_PORT=$2
+POLICY_DROOLS_PORT=$3
+RESOURCE_ID=$4
+
+echo
+echo
+echo "Removing the vFW Policy from PDP.."
+echo
+echo
+
+curl -v -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyComponent" : "PDP",
+ "policyName": "com.BRMSParamvFirewall",
+ "policyType": "BRMS_Param"
+}' http://${K8S_HOST}:${POLICY_PDP_PORT}/pdp/api/deletePolicy
+
+sleep 20
+
+echo
+
+echo
+echo "Updating vFW Operational Policy .."
+echo
+
+curl -v -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "policyConfigType": "BRMS_PARAM",
+ "policyName": "com.BRMSParamvFirewall",
+ "policyDescription": "BRMS Param vFirewall policy",
+ "policyScope": "com",
+ "attributes": {
+ "MATCHING": {
+ "controller": "amsterdam"
+ },
+ "RULE": {
+ "templateName": "ClosedLoopControlName",
+ "closedLoopControlName": "ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a",
+ "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a%0D%0A++trigger_policy%3A+unique-policy-id-1-modifyConfig%0D%0A++timeout%3A+1200%0D%0A++abatement%3A+false%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-modifyConfig%0D%0A++++name%3A+modify+packet+gen+config%0D%0A++++description%3A%0D%0A++++actor%3A+APPC%0D%0A++++recipe%3A+ModifyConfig%0D%0A++++target%3A%0D%0A++++++%23+TBD+-+Cannot+be+known+until+instantiation+is+done%0D%0A++++++resourceID%3A+'${RESOURCE_ID}'%0D%0A++++++type%3A+VNF%0D%0A++++retry%3A+0%0D%0A++++timeout%3A+300%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard"
+ }
+ }
+}' http://${K8S_HOST}:${POLICY_PDP_PORT}/pdp/api/updatePolicy
+
+sleep 5
+
+echo
+echo
+echo "Pushing the vFW Policy .."
+echo
+echo
+
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyName": "com.BRMSParamvFirewall",
+ "policyType": "BRMS_Param"
+}' http://${K8S_HOST}:${POLICY_PDP_PORT}/pdp/api/pushPolicy
+
+sleep 20
+
+echo
+echo
+echo "Restarting PDP-D .."
+echo
+echo
+
+POD=$(kubectl --namespace onap-policy get pods | sed 's/ .*//'| grep drools)
+kubectl --namespace onap-policy exec -it ${POD} -- bash -c "source /opt/app/policy/etc/profile.d/env.sh && policy stop && sleep 5 && policy start"
+
+sleep 20
+
+echo
+echo
+echo "PDP-D amsterdam maven coordinates .."
+echo
+echo
+
+curl -vvv --silent --user @1b3rt:31nst31n -X GET http://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools | python -m json.tool
+
+
+echo
+echo
+echo "PDP-D control loop updated .."
+echo
+echo
+
+curl -v --silent --user @1b3rt:31nst31n -X GET http://${K8S_HOST}:${POLICY_DROOLS_PORT}/policy/pdp/engine/controllers/amsterdam/drools/facts/closedloop-amsterdam/org.onap.policy.controlloop.Params | python -m json.tool
diff --git a/kubernetes/policy/charts/drools/templates/NOTES.txt b/kubernetes/policy/charts/drools/templates/NOTES.txt
new file mode 100644
index 0000000..91d8ed4
--- /dev/null
+++ b/kubernetes/policy/charts/drools/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/policy/charts/drools/templates/configmap.yaml b/kubernetes/policy/charts/drools/templates/configmap.yaml
new file mode 100644
index 0000000..36f458f
--- /dev/null
+++ b/kubernetes/policy/charts/drools/templates/configmap.yaml
@@ -0,0 +1,46 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-settings-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/drools/settings.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/opt/policy/config/drools/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-script-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/scripts/do-start.sh*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/drools/logback.xml").AsConfig . | indent 2 }}
+
diff --git a/kubernetes/policy/charts/drools/templates/deployment.yaml b/kubernetes/policy/charts/drools/templates/deployment.yaml
new file mode 100644
index 0000000..349f882
--- /dev/null
+++ b/kubernetes/policy/charts/drools/templates/deployment.yaml
@@ -0,0 +1,180 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.global.mariadb.nameOverride }}
+ - --container-name
+ - {{ .Values.global.nexus.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ hostAliases:
+ - ip: "{{ .Values.aaiServiceClusterIp }}"
+ hostnames:
+ - "aai.api.simpledemo.openecomp.org"
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.externalPort }}
+ - containerPort: {{ .Values.service.externalPort2 }}
+ command:
+ - /bin/bash
+ - -c
+ - ./do-start.sh
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.externalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{- end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.externalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: REPLICAS
+ value: "{{ .Values.replicaCount }}"
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /tmp/policy-install/config/policy-keystore
+ name: drools-secret
+ subPath: policy-keystore
+ - mountPath: /tmp/policy-install/config/feature-healthcheck.conf
+ name: drools-secret
+ subPath: feature-healthcheck.conf
+ - mountPath: /tmp/policy-install/config/base.conf
+ name: drools-config
+ subPath: base.conf
+ - mountPath: /tmp/policy-install/config/policy-management.conf
+ name: drools-config
+ subPath: policy-management.conf
+ - mountPath: /tmp/policy-install/config/drools-tweaks.sh
+ name: drools-config
+ subPath: drools-tweaks.sh
+ - mountPath: /usr/share/maven/conf/settings.xml
+ name: drools-settingsxml
+ subPath: settings.xml
+ - mountPath: /var/log/onap
+ name: policy-logs
+ - mountPath: /tmp/logback.xml
+ name: policy-logback
+ subPath: logback.xml
+ - mountPath: /tmp/policy-install/do-start.sh
+ name: pe-scripts
+ subPath: do-start.sh
+ lifecycle:
+ postStart:
+ exec:
+ command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/opt/app/policy/config/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ - image: "{{ .Values.global.loggingRepository | default .Values.loggingRepository }}/{{ .Values.loggingImage }}"
+ imagePullPolicy: {{ .Values.pullPolicy }}
+ name: filebeat-onap
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ name: filebeat-conf
+ subPath: filebeat.yml
+ - mountPath: /var/log/onap
+ name: policy-logs
+ - mountPath: /usr/share/filebeat/data
+ name: policy-data-filebeat
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-filebeat-configmap
+ - name: policy-logs
+ emptyDir: {}
+ - name: policy-data-filebeat
+ emptyDir: {}
+ - name: policy-logback
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ - name: drools-settingsxml
+ configMap:
+ name: {{ include "common.fullname" . }}-settings-configmap
+ - name: drools-config
+ configMap:
+ name: {{ include "common.fullname" . }}-configmap
+ items:
+ - key: base.conf
+ path: base.conf
+ mode: 0755
+ - key: policy-management.conf
+ path: policy-management.conf
+ mode: 0755
+ - key: drools-tweaks.sh
+ path: drools-tweaks.sh
+ mode: 0755
+ - name: drools-secret
+ secret:
+ secretName: {{ include "common.fullname" . }}-secret
+ items:
+ - key: policy-keystore
+ path: policy-keystore
+ mode: 0644
+ - key: feature-healthcheck.conf
+ path: feature-healthcheck.conf
+ mode: 0644
+ - name: pe-scripts
+ configMap:
+ name: {{ include "common.fullname" . }}-script-configmap
+ defaultMode: 0777
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/policy/charts/drools/templates/secrets.yaml b/kubernetes/policy/charts/drools/templates/secrets.yaml
new file mode 100644
index 0000000..18f5f16
--- /dev/null
+++ b/kubernetes/policy/charts/drools/templates/secrets.yaml
@@ -0,0 +1,27 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ include "common.fullname" . }}-secret
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ (.Files.Glob "resources/config/opt/policy/config/drools/keys/*").AsSecrets | indent 2 }}
+type: Opaque
diff --git a/kubernetes/policy/charts/drools/templates/service.yaml b/kubernetes/policy/charts/drools/templates/service.yaml
new file mode 100644
index 0000000..4335f7c
--- /dev/null
+++ b/kubernetes/policy/charts/drools/templates/service.yaml
@@ -0,0 +1,42 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}-{{ .Values.service.externalPort }}
+ - port: {{ .Values.service.externalPort2 }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+ name: {{ .Values.service.name }}-{{ .Values.service.externalPort2 }}
+ {{- else -}}
+ - port: {{ .Values.service.type.externalPort }}
+ targetPort: {{ .Values.service.type.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/policy/charts/drools/values.yaml b/kubernetes/policy/charts/drools/values.yaml
new file mode 100644
index 0000000..14ebe31
--- /dev/null
+++ b/kubernetes/policy/charts/drools/values.yaml
@@ -0,0 +1,91 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+ ubuntuImage: ubuntu:16.04
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: nexus3.onap.org:10001
+image: onap/policy-drools:1.2-SNAPSHOT-latest
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+aaiServiceClusterIp: 10.43.255.254
+# application configuration
+# Example:
+config: {}
+# username: myusername
+# password: mypassword
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: false
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+service:
+ type: NodePort
+ name: drools
+ externalPort: 6969
+ nodePort: 17
+ externalPort2: 9696
+ nodePort2: 21
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi