Add Standardized Configuration to POLICY
Change-Id: Iabdb2bba14b5095c08ff2920aec97a213e0acb30
Issue-ID: OOM-745
Signed-off-by: mayankg2703 <mayank.gupta@amdocs.com>
Signed-off-by: Mike Elliott <mike.elliott@amdocs.com>
Signed-off-by: Mandeep Khinda <mandeep.khinda@amdocs.com>
diff --git a/kubernetes/policy/charts/pdp/templates/NOTES.txt b/kubernetes/policy/charts/pdp/templates/NOTES.txt
new file mode 100644
index 0000000..91d8ed4
--- /dev/null
+++ b/kubernetes/policy/charts/pdp/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/policy/charts/pdp/templates/configmap.yaml b/kubernetes/policy/charts/pdp/templates/configmap.yaml
new file mode 100644
index 0000000..76a4c0f
--- /dev/null
+++ b/kubernetes/policy/charts/pdp/templates/configmap.yaml
@@ -0,0 +1,29 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/xacml-pdp-rest/logback.xml").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-pe-configmap
+ namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/pe/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/policy/charts/pdp/templates/service.yaml b/kubernetes/policy/charts/pdp/templates/service.yaml
new file mode 100644
index 0000000..aed3fd1
--- /dev/null
+++ b/kubernetes/policy/charts/pdp/templates/service.yaml
@@ -0,0 +1,52 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "{{ include "common.fullname" . }}",
+ "version": "v1",
+ "url": "/pdp",
+ "protocol": "REST",
+ "port": "8081",
+ "visualRange":"1"
+ },
+ ]'
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ sessionAffinity: None
+
diff --git a/kubernetes/policy/charts/pdp/templates/statefulset.yaml b/kubernetes/policy/charts/pdp/templates/statefulset.yaml
new file mode 100644
index 0000000..367cde4
--- /dev/null
+++ b/kubernetes/policy/charts/pdp/templates/statefulset.yaml
@@ -0,0 +1,143 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: apps/v1beta1
+kind: StatefulSet
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ serviceName: {{ include "common.fullname" . }}
+ replicas: {{ .Values.replicaCount }}
+ selector:
+ matchLabels:
+ app: {{ include "common.name" . }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.global.pap.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - command:
+ - /bin/bash
+ - ./do-start.sh
+ - pdp
+ name: {{ include "common.name" . }}
+ image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.externalPort }}
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.externalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{- end }}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.externalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ volumeMounts:
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /tmp/policy-install/config/base.conf
+ name: pe
+ subPath: base.conf
+ - mountPath: /tmp/policy-install/config/
+ name: pe-pdp
+ - mountPath: /tmp/policy-install/do-start.sh
+ name: pe-scripts
+ subPath: do-start.sh
+ - mountPath: /var/log/onap
+ name: policy-logs
+ - mountPath: /tmp/logback.xml
+ name: policy-logback
+ subPath: logback.xml
+ lifecycle:
+ postStart:
+ exec:
+ command: ["/bin/sh", "-c", "export LOG=wait_logback.log; touch $LOG; export SRC=/tmp/logback.xml; export DST=/opt/app/policy/servers/pdp/webapps/pdp/WEB-INF/classes/; while [ ! -e $DST ]; do echo 'Waiting for $DST...' >> $LOG; sleep 5; done; sleep 2; /bin/cp -f $SRC $DST; echo 'Done' >> $LOG"]
+ - image: {{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: filebeat-onap
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ name: filebeat-conf
+ subPath: filebeat.yml
+ - mountPath: /var/log/onap
+ name: policy-logs
+ - mountPath: /usr/share/filebeat/data
+ name: policy-data-filebeat
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ - name: filebeat-conf
+ configMap:
+ name: {{ .Release.Name }}-filebeat-configmap
+ - name: policy-logs
+ emptyDir: {}
+ - name: policy-data-filebeat
+ emptyDir: {}
+ - name: policy-logback
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ - name: pe
+ configMap:
+ name: {{ .Release.Name }}-pe-configmap
+ defaultMode: 0755
+ - name: pe-scripts
+ configMap:
+ name: {{ .Release.Name }}-pe-scripts-configmap
+ defaultMode: 0777
+ - name: pe-pdp
+ configMap:
+ name: {{ include "common.fullname" . }}-pe-configmap
+ defaultMode: 0755
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"