Add Standardized Configuration to POLICY
Change-Id: Iabdb2bba14b5095c08ff2920aec97a213e0acb30
Issue-ID: OOM-745
Signed-off-by: mayankg2703 <mayank.gupta@amdocs.com>
Signed-off-by: Mike Elliott <mike.elliott@amdocs.com>
Signed-off-by: Mandeep Khinda <mandeep.khinda@amdocs.com>
diff --git a/kubernetes/policy/resources/config/log/drools/logback.xml b/kubernetes/policy/resources/config/log/drools/logback.xml
deleted file mode 100644
index daecf97..0000000
--- a/kubernetes/policy/resources/config/log/drools/logback.xml
+++ /dev/null
@@ -1,107 +0,0 @@
-<!--
- ============LICENSE_START=======================================================
- policy-management
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
- -->
-
-<configuration scan="true" scanPeriod="30 seconds" debug="false">
-
- <property name="logDir" value="/var/log/onap" />
-
- <property name="errorLog" value="error" />
- <property name="debugLog" value="debug" />
- <property name="networkLog" value="network" />
-
- <property name="debugPattern" value="[%date|%level|%logger{0}|%thread] %msg%n" />
- <property name="errorPattern" value="${debugPattern}" />
- <property name="networkPattern" value="[%d|%t]%m%n" />
-
- <appender name="ErrorOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDir}/${errorLog}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDir}/${errorLog}.%i.log.zip</fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>5</maxIndex>
- </rollingPolicy>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>WARN</level>
- </filter>
- <triggeringPolicy
- class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>15MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${errorPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="AsyncErrorOut" class="ch.qos.logback.classic.AsyncAppender">
- <appender-ref ref="ErrorOut" />
- </appender>
-
- <appender name="DebugOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDir}/${debugLog}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDir}/${debugLog}.%i.log.zip</fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>20MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${debugPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="AsyncDebugOut" class="ch.qos.logback.classic.AsyncAppender">
- <appender-ref ref="DebugOut" />
- </appender>
-
- <appender name="NetworkOut" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDir}/${networkLog}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
- <fileNamePattern>${logDir}/${networkLog}.%i.log.zip</fileNamePattern>
- <minIndex>1</minIndex>
- <maxIndex>9</maxIndex>
- </rollingPolicy>
- <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
- <maxFileSize>15MB</maxFileSize>
- </triggeringPolicy>
- <encoder>
- <pattern>${networkPattern}</pattern>
- </encoder>
- </appender>
-
- <appender name="AsyncNetworkOut" class="ch.qos.logback.classic.AsyncAppender">
- <appender-ref ref="NetworkOut" />
- </appender>
-
- <logger name="network" level="INFO" additivity="false">
- <appender-ref ref="AsyncNetworkOut" />
- </logger>
-
- <logger name="org.eclipse.jetty.server.RequestLog" level="info" additivity="false">
- <appender-ref ref="AsyncNetworkOut" />
- </logger>
-
- <root level="INFO">
- <appender-ref ref="AsyncDebugOut" />
- <appender-ref ref="AsyncErrorOut" />
- </root>
-
-</configuration>
\ No newline at end of file
diff --git a/kubernetes/policy/resources/config/log/ep_sdk_app/logback.xml b/kubernetes/policy/resources/config/log/ep_sdk_app/logback.xml
index d0871bd..bcc6b16 100644
--- a/kubernetes/policy/resources/config/log/ep_sdk_app/logback.xml
+++ b/kubernetes/policy/resources/config/log/ep_sdk_app/logback.xml
@@ -1,190 +1,186 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ================================================================================
- eCOMP Portal SDK
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ================================================================================
- -->
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--
- Logback files for the ECOMP SDK Application "ecomp_app"
- are created in directory ${catalina.base}/logs/ecomp_app;
- e.g., apache-tomcat-8.0.35/logs/ecomp_app/application.log
- -->
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="policy" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="ep_sdk_app" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="generalLogName" value="application" />
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!--
- These loggers are not used in code (yet).
- <property name="securityLogName" value="security" />
- <property name="policyLogName" value="policy" />
- <property name="performanceLogName" value="performance" />
- <property name="serverLogName" value="server" />
- -->
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
- log -->
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELF">
- <file>${logDirectory}/${generalLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <!-- daily rollover -->
- <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="org.openecomp.portalapp.util.CustomLoggingFilter" />
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELF">
- <queueSize>${queueSize}</queueSize>
- <!-- Class name is part of caller data -->
- <includeCallerData>true</includeCallerData>
- <appender-ref ref="EELF" />
- </appender>
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFAudit">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <!-- daily rollover -->
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFAudit">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFMetrics">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <!-- daily rollover -->
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFMetrics">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFError">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <!-- daily rollover -->
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFError">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFDebug">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <!-- daily rollover -->
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFDebug">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger additivity="false" level="info" name="com.att.eelf.audit">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.metrics">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.error">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <logger additivity="false" level="debug" name="com.att.eelf.debug">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <root level="INFO">
- <appender-ref ref="asyncEELFDebug" />
- </root>
-</configuration>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<configuration debug="true" scan="true" scanPeriod="3 seconds">
+ <!--
+ Logback files for the ECOMP SDK Application "ecomp_app"
+ are created in directory ${catalina.base}/logs/ecomp_app;
+ e.g., apache-tomcat-8.0.35/logs/ecomp_app/application.log
+ -->
+ <!--<jmxConfigurator /> -->
+ <!-- specify the base path of the log directory -->
+ <property name="logDir" value="/var/log/onap" />
+ <!-- specify the component name -->
+ <property name="componentName" value="policy" />
+ <!-- specify the sub component name -->
+ <property name="subComponentName" value="ep_sdk_app" />
+ <!-- The directories where logs are written -->
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
+ <!-- log file names -->
+ <property name="generalLogName" value="application" />
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+ <property name="queueSize" value="256" />
+ <property name="maxFileSize" value="50MB" />
+ <property name="maxHistory" value="30" />
+ <property name="totalSizeCap" value="10GB" />
+ <!--
+ These loggers are not used in code (yet).
+ <property name="securityLogName" value="security" />
+ <property name="policyLogName" value="policy" />
+ <property name="performanceLogName" value="performance" />
+ <property name="serverLogName" value="server" />
+ -->
+ <!-- Example evaluator filter applied against console appender -->
+ <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <!-- ============================================================================ -->
+ <!-- EELF Appenders -->
+ <!-- ============================================================================ -->
+ <!-- The EELFAppender is used to record events to the general application
+ log -->
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELF">
+ <file>${logDirectory}/${generalLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <!-- daily rollover -->
+ <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ <filter class="org.openecomp.portalapp.util.CustomLoggingFilter" />
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELF">
+ <queueSize>${queueSize}</queueSize>
+ <!-- Class name is part of caller data -->
+ <includeCallerData>true</includeCallerData>
+ <appender-ref ref="EELF" />
+ </appender>
+ <!-- EELF Audit Appender. This appender is used to record audit engine
+ related logging events. The audit logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
+ these events as part of the application root log. -->
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFAudit">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <!-- daily rollover -->
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFAudit">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFMetrics">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <!-- daily rollover -->
+ <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFMetrics">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFMetrics" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFError">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <!-- daily rollover -->
+ <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFError">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFError" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFDebug">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <!-- daily rollover -->
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFDebug">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+ <!-- ============================================================================ -->
+ <!-- EELF loggers -->
+ <!-- ============================================================================ -->
+ <logger additivity="false" level="info" name="com.att.eelf.audit">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger additivity="false" level="info" name="com.att.eelf.metrics">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger additivity="false" level="info" name="com.att.eelf.error">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+ <logger additivity="false" level="debug" name="com.att.eelf.debug">
+ <appender-ref ref="asyncEELFDebug" />
+ </logger>
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+</configuration>
diff --git a/kubernetes/policy/resources/config/log/filebeat/filebeat.yml b/kubernetes/policy/resources/config/log/filebeat/filebeat.yml
deleted file mode 100644
index b0d4690..0000000
--- a/kubernetes/policy/resources/config/log/filebeat/filebeat.yml
+++ /dev/null
@@ -1,41 +0,0 @@
-filebeat.prospectors:
-#it is mandatory, in our case it's log
-- input_type: log
- #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
- paths:
- - /var/log/onap/*/*/*/*.log
- - /var/log/onap/*/*/*.log
- - /var/log/onap/*/*.log
- #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
- ignore_older: 48h
- # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
- clean_inactive: 96h
-
-
-# Name of the registry file. If a relative path is used, it is considered relative to the
-# data path. Else full qualified file name.
-#filebeat.registry_file: ${path.data}/registry
-
-
-output.logstash:
- #List of logstash server ip addresses with port number.
- #But, in our case, this will be the loadbalancer IP address.
- #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
- hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"]
- #If enable will do load balancing among availabe Logstash, automatically.
- loadbalance: true
-
- #The list of root certificates for server verifications.
- #If certificate_authorities is empty or not set, the trusted
- #certificate authorities of the host system are used.
- #ssl.certificate_authorities: $ssl.certificate_authorities
-
- #The path to the certificate for SSL client authentication. If the certificate is not specified,
- #client authentication is not available.
- #ssl.certificate: $ssl.certificate
-
- #The client certificate key used for client authentication.
- #ssl.key: $ssl.key
-
- #The passphrase used to decrypt an encrypted key stored in the configured key file
- #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/policy/resources/config/log/pypdpserver/logback.xml b/kubernetes/policy/resources/config/log/pypdpserver/logback.xml
deleted file mode 100644
index c4b596b..0000000
--- a/kubernetes/policy/resources/config/log/pypdpserver/logback.xml
+++ /dev/null
@@ -1,154 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ============LICENSE_START=======================================================
- ECOMP Policy Engine
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
- -->
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="policy" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="pypdpserver" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
- log -->
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFAudit">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFAudit">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFMetrics">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
- %msg%n"</pattern> -->
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFMetrics">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFError">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFError">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFDebug">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFDebug">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger additivity="false" level="info" name="com.att.eelf.audit">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.metrics">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.error">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <logger additivity="false" level="debug" name="com.att.eelf.debug">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <root level="INFO">
- <appender-ref ref="asyncEELFDebug" />
- <appender-ref ref="asyncEELFError" />
- </root>
-</configuration>
\ No newline at end of file
diff --git a/kubernetes/policy/resources/config/log/xacml-pap-rest/logback.xml b/kubernetes/policy/resources/config/log/xacml-pap-rest/logback.xml
index 77068bb..9401e54 100644
--- a/kubernetes/policy/resources/config/log/xacml-pap-rest/logback.xml
+++ b/kubernetes/policy/resources/config/log/xacml-pap-rest/logback.xml
@@ -1,153 +1,150 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ============LICENSE_START=======================================================
- ECOMP-PAP-REST
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
- -->
-<configuration debug="true" scan="true" scanPeriod="3 seconds">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="policy" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="xacml-pap-rest" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
- log -->
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFAudit">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFAudit">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFMetrics">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
- %msg%n"</pattern> -->
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFMetrics">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFError">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFError">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFDebug">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFDebug">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger additivity="false" level="info" name="com.att.eelf.audit">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.metrics">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger additivity="false" level="info" name="com.att.eelf.error">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <logger additivity="false" level="debug" name="com.att.eelf.debug">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <root level="INFO">
- <appender-ref ref="asyncEELFDebug" />
- </root>
-</configuration>
\ No newline at end of file
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+# Copyright © 2017 Amdocs, Bell Canada, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+
+<configuration debug="true" scan="true" scanPeriod="3 seconds">
+ <!--<jmxConfigurator /> -->
+ <!-- specify the base path of the log directory -->
+ <property name="logDir" value="/var/log/onap" />
+ <!-- specify the component name -->
+ <property name="componentName" value="policy" />
+ <!-- specify the sub component name -->
+ <property name="subComponentName" value="xacml-pap-rest" />
+ <!-- The directories where logs are written -->
+ <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
+ <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
+ <!-- log file names -->
+ <property name="errorLogName" value="error" />
+ <property name="metricsLogName" value="metrics" />
+ <property name="auditLogName" value="audit" />
+ <property name="debugLogName" value="debug" />
+ <property name="queueSize" value="256" />
+ <property name="maxFileSize" value="50MB" />
+ <property name="maxHistory" value="30" />
+ <property name="totalSizeCap" value="10GB" />
+ <!-- Example evaluator filter applied against console appender -->
+ <appender class="ch.qos.logback.core.ConsoleAppender" name="STDOUT">
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <!-- ============================================================================ -->
+ <!-- EELF Appenders -->
+ <!-- ============================================================================ -->
+ <!-- The EELFAppender is used to record events to the general application
+ log -->
+ <!-- EELF Audit Appender. This appender is used to record audit engine
+ related logging events. The audit logger and appender are specializations
+ of the EELF application root logger and appender. This can be used to segregate
+ Policy engine events from other components, or it can be eliminated to record
+ these events as part of the application root log. -->
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFAudit">
+ <file>${logDirectory}/${auditLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFAudit">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFAudit" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFMetrics">
+ <file>${logDirectory}/${metricsLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
+ %msg%n"</pattern> -->
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFMetrics">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFMetrics" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFError">
+ <file>${logDirectory}/${errorLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+ <level>INFO</level>
+ </filter>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFError">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFError" />
+ </appender>
+ <appender class="ch.qos.logback.core.rolling.RollingFileAppender" name="EELFDebug">
+ <file>${logDirectory}/${debugLogName}.log</file>
+ <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+ <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
+ <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
+ <maxFileSize>${maxFileSize}</maxFileSize>
+ </timeBasedFileNamingAndTriggeringPolicy>
+ <maxHistory>${maxHistory}</maxHistory>
+ <totalSizeCap>${totalSizeCap}</totalSizeCap>
+ </rollingPolicy>
+ <encoder>
+ <pattern>${pattern}</pattern>
+ </encoder>
+ </appender>
+ <appender class="ch.qos.logback.classic.AsyncAppender" name="asyncEELFDebug">
+ <queueSize>${queueSize}</queueSize>
+ <appender-ref ref="EELFDebug" />
+ <includeCallerData>true</includeCallerData>
+ </appender>
+ <!-- ============================================================================ -->
+ <!-- EELF loggers -->
+ <!-- ============================================================================ -->
+ <logger additivity="false" level="info" name="com.att.eelf.audit">
+ <appender-ref ref="asyncEELFAudit" />
+ </logger>
+ <logger additivity="false" level="info" name="com.att.eelf.metrics">
+ <appender-ref ref="asyncEELFMetrics" />
+ </logger>
+ <logger additivity="false" level="info" name="com.att.eelf.error">
+ <appender-ref ref="asyncEELFError" />
+ </logger>
+ <logger additivity="false" level="debug" name="com.att.eelf.debug">
+ <appender-ref ref="asyncEELFDebug" />
+ </logger>
+ <root level="INFO">
+ <appender-ref ref="asyncEELFDebug" />
+ </root>
+</configuration>
diff --git a/kubernetes/policy/resources/config/log/xacml-pdp-rest/logback.xml b/kubernetes/policy/resources/config/log/xacml-pdp-rest/logback.xml
deleted file mode 100644
index c9c05d9..0000000
--- a/kubernetes/policy/resources/config/log/xacml-pdp-rest/logback.xml
+++ /dev/null
@@ -1,153 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
- ============LICENSE_START=======================================================
- ECOMP-PDP-REST
- ================================================================================
- Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
- -->
-<configuration scan="true" scanPeriod="3 seconds" debug="true">
- <!--<jmxConfigurator /> -->
- <!-- specify the base path of the log directory -->
- <property name="logDir" value="/var/log/onap" />
- <!-- specify the component name -->
- <property name="componentName" value="policy" />
- <!-- specify the sub component name -->
- <property name="subComponentName" value="xacml-pdp-rest" />
- <!-- The directories where logs are written -->
- <property name="logDirectory" value="${logDir}/${componentName}/${subComponentName}" />
- <property name="pattern" value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}\t[%thread]\t%-5level\t%logger{36}\t%replace(%replace(%replace(%mdc){'\t','\\\\t'}){', ','\t'}){'\n', '\\\\n'}\t%replace(%replace(%msg){'\n', '\\\\n'}){'\t','\\\\t'}%n" />
- <!-- log file names -->
- <property name="errorLogName" value="error" />
- <property name="metricsLogName" value="metrics" />
- <property name="auditLogName" value="audit" />
- <property name="debugLogName" value="debug" />
- <property name="queueSize" value="256" />
- <property name="maxFileSize" value="50MB" />
- <property name="maxHistory" value="30" />
- <property name="totalSizeCap" value="10GB" />
- <!-- Example evaluator filter applied against console appender -->
- <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF Appenders -->
- <!-- ============================================================================ -->
- <!-- The EELFAppender is used to record events to the general application
- log -->
- <!-- EELF Audit Appender. This appender is used to record audit engine
- related logging events. The audit logger and appender are specializations
- of the EELF application root logger and appender. This can be used to segregate
- Policy engine events from other components, or it can be eliminated to record
- these events as part of the application root log. -->
- <appender name="EELFAudit" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${auditLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFAudit" />
- </appender>
- <appender name="EELFMetrics" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${metricsLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} -
- %msg%n"</pattern> -->
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFMetrics" />
- </appender>
- <appender name="EELFError" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${errorLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
- <level>INFO</level>
- </filter>
- </appender>
- <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFError" />
- </appender>
- <appender name="EELFDebug" class="ch.qos.logback.core.rolling.RollingFileAppender">
- <file>${logDirectory}/${debugLogName}.log</file>
- <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
- <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.%i.log</fileNamePattern>
- <timeBasedFileNamingAndTriggeringPolicy class="ch.qos.logback.core.rolling.SizeAndTimeBasedFNATP">
- <maxFileSize>${maxFileSize}</maxFileSize>
- </timeBasedFileNamingAndTriggeringPolicy>
- <maxHistory>${maxHistory}</maxHistory>
- <totalSizeCap>${totalSizeCap}</totalSizeCap>
- </rollingPolicy>
- <encoder>
- <pattern>${pattern}</pattern>
- </encoder>
- </appender>
- <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
- <queueSize>${queueSize}</queueSize>
- <appender-ref ref="EELFDebug" />
- <includeCallerData>true</includeCallerData>
- </appender>
- <!-- ============================================================================ -->
- <!-- EELF loggers -->
- <!-- ============================================================================ -->
- <logger name="com.att.eelf.audit" level="info" additivity="false">
- <appender-ref ref="asyncEELFAudit" />
- </logger>
- <logger name="com.att.eelf.metrics" level="info" additivity="false">
- <appender-ref ref="asyncEELFMetrics" />
- </logger>
- <logger name="com.att.eelf.error" level="info" additivity="false">
- <appender-ref ref="asyncEELFError" />
- </logger>
- <logger name="com.att.eelf.debug" level="debug" additivity="false">
- <appender-ref ref="asyncEELFDebug" />
- </logger>
- <root level="INFO">
- <appender-ref ref="asyncEELFDebug" />
- </root>
-</configuration>
\ No newline at end of file