Add FCAPS to oom
Issue-ID: MULTICLOUD-499
Change-Id: I3a06d4e7e78f2d24ac4600946e4d42c8848ad277
Signed-off-by: Liexiang Yue <yueliexiang@chinamobile.com>
Signed-off-by: Bin Yang <bin.yang@windriver.com>
diff --git a/kubernetes/multicloud/charts/multicloud-fcaps/templates/NOTES.txt b/kubernetes/multicloud/charts/multicloud-fcaps/templates/NOTES.txt
new file mode 100644
index 0000000..ae62a4f
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-fcaps/templates/NOTES.txt
@@ -0,0 +1,34 @@
+# Copyright (c) 2019, CMCC Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/multicloud/charts/multicloud-fcaps/templates/configmap.yaml b/kubernetes/multicloud/charts/multicloud-fcaps/templates/configmap.yaml
new file mode 100644
index 0000000..fce36dc
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-fcaps/templates/configmap.yaml
@@ -0,0 +1,28 @@
+{{/*
+# Copyright (c) 2019, CMCC Technologies Co., Ltd.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}-log-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/multicloud/charts/multicloud-fcaps/templates/deployment.yaml b/kubernetes/multicloud/charts/multicloud-fcaps/templates/deployment.yaml
new file mode 100644
index 0000000..f9abfc1
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-fcaps/templates/deployment.yaml
@@ -0,0 +1,113 @@
+{{/*
+# Copyright (c) 2019, CMCC Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ selector:
+ matchLabels:
+ app: {{ include "common.name" . }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ name: {{ include "common.name" . }}
+ annotations:
+ sidecar.istio.io/inject: "{{.Values.istioSidecar}}"
+ spec:
+ containers:
+ - env:
+ - name: MSB_ADDR
+ value: "{{ .Values.config.msbgateway }}.{{ include "common.namespace" . }}"
+ - name: MSB_PORT
+ value: "{{ .Values.config.msbPort }}"
+ - name: AAI_ADDR
+ value: aai.{{ include "common.namespace" . }}
+ - name: AAI_PORT
+ value: "{{ .Values.config.aai.port }}"
+ - name: AAI_SCHEMA_VERSION
+ value: "{{ .Values.config.aai.schemaVersion }}"
+ - name: AAI_USERNAME
+ value: "{{ .Values.config.aai.username }}"
+ - name: AAI_PASSWORD
+ value: "{{ .Values.config.aai.password }}"
+ name: {{ include "common.name" . }}
+ volumeMounts:
+ - mountPath: /var/log/onap
+ name: fcaps-log
+ - mountPath: /opt/fcaps/fcaps/pub/config/log.yml
+ name: fcaps-logconfig
+ subPath: log.yml
+ resources:
+{{ include "common.resources" . | indent 12 }}
+ image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{ if .Values.liveness.enabled }}
+ livenessProbe:
+ httpGet:
+ path: /api/multicloud-fcaps/v1/healthcheck
+ port: {{ .Values.service.internalPort }}
+ scheme: HTTP
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ timeoutSeconds: {{ .Values.liveness.timeoutSeconds }}
+ successThreshold: {{ .Values.liveness.successThreshold }}
+ failureThreshold: {{ .Values.liveness.failureThreshold }}
+ {{ end }}
+ # side car containers
+ - image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: filebeat-onap
+ volumeMounts:
+ - mountPath: /usr/share/filebeat/filebeat.yml
+ name: filebeat-conf
+ subPath: filebeat.yml
+ - mountPath: /var/log/onap
+ name: fcaps-log
+ - mountPath: /usr/share/filebeat/data
+ name: fcaps-data-filebeat
+ - image: {{ .Values.rabbitmq }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: rabbit-mq
+
+ volumes:
+ - name: fcaps-log
+ emptyDir: {}
+ - name: fcaps-data-filebeat
+ emptyDir: {}
+ - name: filebeat-conf
+ configMap:
+ name: multicloud-filebeat-configmap
+ - name: fcaps-logconfig
+ configMap:
+ name: {{ include "common.fullname" . }}-log-configmap
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
+ restartPolicy: Always
\ No newline at end of file
diff --git a/kubernetes/multicloud/charts/multicloud-fcaps/templates/service.yaml b/kubernetes/multicloud/charts/multicloud-fcaps/templates/service.yaml
new file mode 100644
index 0000000..ac3a840
--- /dev/null
+++ b/kubernetes/multicloud/charts/multicloud-fcaps/templates/service.yaml
@@ -0,0 +1,60 @@
+{{/*
+# Copyright (c) 2019, CMCC Technologies Co., Ltd.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.servicename" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+ msb.onap.org/service-info: '[
+ {
+ "serviceName": "multicloud-fcaps",
+ "version": "v0",
+ "url": "/api/multicloud-fcaps/v0",
+ "protocol": "REST",
+ "port": "{{ .Values.service.externalPort }}",
+ "visualRange": "1"
+ },
+ {
+ "serviceName": "multicloud-fcaps",
+ "version": "v1",
+ "url": "/api/multicloud-fcaps/v1",
+ "protocol": "REST",
+ "port": "{{ .Values.service.externalPort }}",
+ "visualRange": "1"
+ }
+ ]'
+spec:
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefixExt | default .Values.nodePortPrefixExt }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.portName }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.portName }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ type: {{ .Values.service.type }}