Add Helm Chart Standardization for Clamp
Issue-ID: OOM-735
Change-Id: Id5789742b4c930dcb2bebebbaa2cf82182949ee3
Signed-off-by: vaibhav_16dec <vaibhav.chopra@amdocs.com>
Signed-off-by: Mike Elliott <mike.elliott@amdocs.com>
diff --git a/kubernetes/clamp/Chart.yaml b/kubernetes/clamp/Chart.yaml
index a162ca7..2f68750 100644
--- a/kubernetes/clamp/Chart.yaml
+++ b/kubernetes/clamp/Chart.yaml
@@ -1,4 +1,4 @@
apiVersion: v1
-description: A Helm chart for Kubernetes
+description: ONAP Clamp
name: clamp
-version: 1.1.0
+version: 2.0.0
diff --git a/kubernetes/clamp/charts/mariadb/Chart.yaml b/kubernetes/clamp/charts/mariadb/Chart.yaml
new file mode 100644
index 0000000..da9cab3
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/Chart.yaml
@@ -0,0 +1,4 @@
+apiVersion: v1
+description: MariaDB Service
+name: mariadb
+version: 2.0.0
diff --git a/kubernetes/clamp/charts/mariadb/NOTES.txt b/kubernetes/clamp/charts/mariadb/NOTES.txt
new file mode 100644
index 0000000..91d8ed4
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/clamp/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
similarity index 100%
rename from kubernetes/clamp/resources/config/mariadb/conf.d/conf1/my.cnf
rename to kubernetes/clamp/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
diff --git a/kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-create-db-objects.sql b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-create-db-objects.sql
similarity index 100%
rename from kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-create-db-objects.sql
rename to kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-create-db-objects.sql
diff --git a/kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-stored-procedures.sql b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-stored-procedures.sql
similarity index 100%
rename from kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-stored-procedures.sql
rename to kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/clds-stored-procedures.sql
diff --git a/kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/drop/clds-drop-db-objects.sql b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/drop/clds-drop-db-objects.sql
similarity index 100%
rename from kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/drop/clds-drop-db-objects.sql
rename to kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/drop/clds-drop-db-objects.sql
diff --git a/kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
similarity index 100%
rename from kubernetes/clamp/resources/config/mariadb/docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
rename to kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
diff --git a/kubernetes/clamp/templates/clamp-mariadb-configmap.yaml b/kubernetes/clamp/charts/mariadb/templates/configmap.yaml
similarity index 80%
rename from kubernetes/clamp/templates/clamp-mariadb-configmap.yaml
rename to kubernetes/clamp/charts/mariadb/templates/configmap.yaml
index 9a5fd8f..8b58aed 100644
--- a/kubernetes/clamp/templates/clamp-mariadb-configmap.yaml
+++ b/kubernetes/clamp/charts/mariadb/templates/configmap.yaml
@@ -3,7 +3,7 @@
kind: ConfigMap
metadata:
name: clamp-entrypoint-initdb-configmap
- namespace: {{ .Values.nsPrefix }}
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
---
@@ -11,7 +11,7 @@
kind: ConfigMap
metadata:
name: clamp-entrypoint-drop-configmap
- namespace: {{ .Values.nsPrefix }}
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/drop/*").AsConfig . | indent 2 }}
---
@@ -19,7 +19,7 @@
kind: ConfigMap
metadata:
name: clamp-entrypoint-bulkload-configmap
- namespace: {{ .Values.nsPrefix }}
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/*").AsConfig . | indent 2 }}
---
@@ -27,7 +27,7 @@
kind: ConfigMap
metadata:
name: clamp-mariadb-conf-configmap
- namespace: {{ .Values.nsPrefix }}
+ namespace: {{ include "common.namespace" . }}
data:
{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
#{{ end }}
diff --git a/kubernetes/clamp/charts/mariadb/templates/deployment.yaml b/kubernetes/clamp/charts/mariadb/templates/deployment.yaml
new file mode 100644
index 0000000..1e17b9b
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/templates/deployment.yaml
@@ -0,0 +1,94 @@
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - name: {{ include "common.name" . }}
+ image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: MYSQL_ROOT_PASSWORD
+ valueFrom:
+ secretKeyRef:
+ name: {{ template "common.fullname" . }}
+ key: db-root-password
+ volumeMounts:
+ - mountPath: /docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
+ name: docker-entrypoint-initdb
+ subPath: load-sql-files-tests-automation.sh
+ - mountPath: /etc/localtime
+ name: localtime
+ readOnly: true
+ - mountPath: /docker-entrypoint-initdb.d/drop/
+ name: docker-entrypoint-clds-drop
+ - mountPath: /docker-entrypoint-initdb.d/bulkload/
+ name: docker-entrypoint-bulkload
+ - mountPath: /etc/mysql/conf.d/conf1/
+ name: clamp-mariadb-conf
+ - mountPath: /var/lib/mysql
+ name: clamp-mariadb-data
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ volumes:
+ {{- if .Values.persistence.enabled }}
+ - name: clamp-mariadb-data
+ persistentVolumeClaim:
+ claimName: {{ include "common.fullname" . }}
+ {{- else }}
+ emptyDir: {}
+ {{- end }}
+ - name: docker-entrypoint-initdb
+ configMap:
+ name: clamp-entrypoint-initdb-configmap
+ - name: docker-entrypoint-clds-drop
+ configMap:
+ name: clamp-entrypoint-drop-configmap
+ - name: docker-entrypoint-bulkload
+ configMap:
+ name: clamp-entrypoint-bulkload-configmap
+ - name: clamp-mariadb-conf
+ configMap:
+ name: clamp-mariadb-conf-configmap
+ - name: localtime
+ hostPath:
+ path: /etc/localtime
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/charts/mariadb/templates/pv.yaml b/kubernetes/clamp/charts/mariadb/templates/pv.yaml
new file mode 100644
index 0000000..31230a9
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/templates/pv.yaml
@@ -0,0 +1,21 @@
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+ name: {{ include "common.fullname" . }}
+spec:
+ capacity:
+ storage: {{ .Values.persistence.size}}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+ hostPath:
+ path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/kubernetes/clamp/charts/mariadb/templates/pvc.yaml b/kubernetes/clamp/charts/mariadb/templates/pvc.yaml
new file mode 100644
index 0000000..b0cd3bf
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/templates/pvc.yaml
@@ -0,0 +1,32 @@
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+ release: "{{ .Release.Name }}"
+ heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+ annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+ selector:
+ matchLabels:
+ name: {{ include "common.fullname" . }}
+ accessModes:
+ - {{ .Values.persistence.accessMode }}
+ resources:
+ requests:
+ storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+ storageClassName: ""
+{{- else }}
+ storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
diff --git a/kubernetes/clamp/charts/mariadb/templates/secrets.yaml b/kubernetes/clamp/charts/mariadb/templates/secrets.yaml
new file mode 100644
index 0000000..4734d1f
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/templates/secrets.yaml
@@ -0,0 +1,13 @@
+apiVersion: v1
+kind: Secret
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+type: Opaque
+data:
+ db-root-password: {{ .Values.config.mysqlPassword | b64enc | quote }}
diff --git a/kubernetes/clamp/charts/mariadb/templates/service.yaml b/kubernetes/clamp/charts/mariadb/templates/service.yaml
new file mode 100644
index 0000000..94ec469
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/templates/service.yaml
@@ -0,0 +1,24 @@
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ {{- end}}
+ name: {{ .Values.service.name }}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/clamp/charts/mariadb/values.yaml b/kubernetes/clamp/charts/mariadb/values.yaml
new file mode 100644
index 0000000..c525fec
--- /dev/null
+++ b/kubernetes/clamp/charts/mariadb/values.yaml
@@ -0,0 +1,91 @@
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+
+ persistence: {}
+
+# application image
+repository: nexus3.onap.org:10001
+image: mariadb:10.1.11
+pullPolicy: Always
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+ mysqlPassword: strong_pitchou
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+ enabled: true
+
+ ## A manually managed Persistent Volume and Claim
+ ## Requires persistence.enabled: true
+ ## If defined, PVC must be created manually before volume will be bound
+ # existingClaim:
+ volumeReclaimPolicy: Retain
+
+ ## database data Persistent Volume Storage Class
+ ## If defined, storageClassName: <storageClass>
+ ## If set to "-", storageClassName: "", which disables dynamic provisioning
+ ## If undefined (the default) or set to null, no storageClassName spec is
+ ## set, choosing the default provisioner. (gp2 on AWS, standard on
+ ## GKE, AWS & OpenStack)
+ ##
+ # storageClass: "-"
+ accessMode: ReadWriteMany
+ size: 2Gi
+ mountPath: /dockerdata-nfs
+ mountSubPath: clamp/mariadb/data
+
+service:
+ type: ClusterIP
+ name: mariadb
+ internalPort: 3306
+ externalPort: 3306
+
+
+ingress:
+ enabled: false
+
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi
diff --git a/kubernetes/clamp/requirements.yaml b/kubernetes/clamp/requirements.yaml
new file mode 100644
index 0000000..56029ab
--- /dev/null
+++ b/kubernetes/clamp/requirements.yaml
@@ -0,0 +1,7 @@
+dependencies:
+ - name: common
+ version: ~2.0.0
+ # local reference to common chart, as it is
+ # a part of this chart's package and will not
+ # be published independently to a repo (at this point)
+ repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/clamp/templates/NOTES.txt b/kubernetes/clamp/templates/NOTES.txt
new file mode 100644
index 0000000..91d8ed4
--- /dev/null
+++ b/kubernetes/clamp/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+ http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+ export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+ export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+ echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+ NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+ You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+ export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+ echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+ export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+ echo "Visit http://127.0.0.1:8080 to use your application"
+ kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/clamp/templates/all-services.yaml b/kubernetes/clamp/templates/all-services.yaml
deleted file mode 100644
index c9f4f5e..0000000
--- a/kubernetes/clamp/templates/all-services.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-#{{ if not .Values.disableClampClampMariadb }}
-apiVersion: v1
-kind: Service
-metadata:
- name: clamp-mariadb
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- app: clamp-mariadb
-spec:
- ports:
- - name: clamp-mariadb
- port: 3306
- selector:
- app: clamp-mariadb
- clusterIP: None
-#{{ end }}
-#{{ if not .Values.disableClampClamp }}
----
-apiVersion: v1
-kind: Service
-metadata:
- name: clamp
- namespace: "{{ .Values.nsPrefix }}"
- annotations:
- msb.onap.org/service-info: '[
- {
- "serviceName": "clamp",
- "version": "v1",
- "url": "/restservices/clds/v1",
- "protocol": "REST",
- "port": "8080",
- "visualRange":"1"
- }
- ]'
-spec:
- ports:
- - name: clamp
- port: 8080
- nodePort: {{ .Values.nodePortPrefix }}95
- selector:
- app: clamp
- type: NodePort
-#{{ end }}
\ No newline at end of file
diff --git a/kubernetes/clamp/templates/clamp-deployment.yaml b/kubernetes/clamp/templates/clamp-deployment.yaml
deleted file mode 100644
index 2c2e13f..0000000
--- a/kubernetes/clamp/templates/clamp-deployment.yaml
+++ /dev/null
@@ -1,52 +0,0 @@
-#{{ if not .Values.disableClampClamp }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- labels:
- app: clamp
- name: clamp
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.clampReplicas }}
- selector:
- matchLabels:
- app: clamp
- template:
- metadata:
- labels:
- app: clamp
- name: clamp
- spec:
- initContainers:
- - command:
- - /root/ready.py
- args:
- - --container-name
- - clamp-mariadb
- env:
- - name: NAMESPACE
- valueFrom:
- fieldRef:
- apiVersion: v1
- fieldPath: metadata.namespace
- image: {{ .Values.image.readiness }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: clamp-readiness
- containers:
- - env:
- - name: SPRING_APPLICATION_JSON
- value: '{
- "spring.datasource.camunda.url": "jdbc:mariadb:sequential://clamp-mariadb.{{ .Values.nsPrefix }}:3306/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&retriesAllDown=2147483647&failoverLoopRetries=2147483647",
- "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clamp-mariadb.{{ .Values.nsPrefix }}:3306/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&retriesAllDown=2147483647&failoverLoopRetries=2147483647"
- }'
- image: {{ .Values.image.clampImage }}:{{ .Values.image.clampVersion }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: clamp
- readinessProbe:
- tcpSocket:
- port: 8080
- initialDelaySeconds: 5
- periodSeconds: 10
- imagePullSecrets:
- - name: {{ .Values.nsPrefix }}-docker-registry-key
-#{{ end }}
diff --git a/kubernetes/clamp/templates/clamp-mariadb-deployment.yaml b/kubernetes/clamp/templates/clamp-mariadb-deployment.yaml
deleted file mode 100644
index a12489e..0000000
--- a/kubernetes/clamp/templates/clamp-mariadb-deployment.yaml
+++ /dev/null
@@ -1,62 +0,0 @@
-#{{ if not .Values.disableClampClampMariadb }}
-apiVersion: extensions/v1beta1
-kind: Deployment
-metadata:
- name: clamp-mariadb
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- replicas: {{ .Values.clampMariaDbReplicas }}
- selector:
- matchLabels:
- app: clamp-mariadb
- template:
- metadata:
- labels:
- app: clamp-mariadb
- name: clamp-mariadb
- spec:
- hostname: clamp-mariadb
- containers:
- - args:
- image: {{ .Values.image.mariadbImage }}:{{ .Values.image.mariadbVersion }}
- imagePullPolicy: {{ .Values.pullPolicy }}
- name: "clamp-mariadb"
- env:
- - name: MYSQL_ROOT_PASSWORD
- value: {{ .Values.mysqlPassword }}
- volumeMounts:
- - mountPath: /docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
- name: docker-entrypoint-initdb
- subPath: load-sql-files-tests-automation.sh
- - mountPath: /docker-entrypoint-initdb.d/drop/
- name: docker-entrypoint-clds-drop
- - mountPath: /docker-entrypoint-initdb.d/bulkload/
- name: docker-entrypoint-bulkload
- - mountPath: /etc/mysql/conf.d/conf1/
- name: clamp-mariadb-conf
- - mountPath: /var/lib/mysql
- name: clamp-mariadb-data
- readinessProbe:
- tcpSocket:
- port: 3306
- initialDelaySeconds: 5
- periodSeconds: 10
- volumes:
- - name: docker-entrypoint-initdb
- configMap:
- name: clamp-entrypoint-initdb-configmap
- - name: docker-entrypoint-clds-drop
- configMap:
- name: clamp-entrypoint-drop-configmap
- - name: docker-entrypoint-bulkload
- configMap:
- name: clamp-entrypoint-bulkload-configmap
- - name: clamp-mariadb-conf
- configMap:
- name: clamp-mariadb-conf-configmap
- - name: clamp-mariadb-data
- persistentVolumeClaim:
- claimName: clamp-db
- imagePullSecrets:
- - name: {{ .Values.nsPrefix }}-docker-registry-key
-#{{ end }}
diff --git a/kubernetes/clamp/templates/clamp-pv-pvc.yaml b/kubernetes/clamp/templates/clamp-pv-pvc.yaml
deleted file mode 100644
index c542de6..0000000
--- a/kubernetes/clamp/templates/clamp-pv-pvc.yaml
+++ /dev/null
@@ -1,32 +0,0 @@
-#{{ if not .Values.disableClampClampMariadb }}
-apiVersion: v1
-kind: PersistentVolume
-metadata:
- name: "{{ .Values.nsPrefix }}-clamp"
- namespace: "{{ .Values.nsPrefix }}"
- labels:
- name: "{{ .Values.nsPrefix }}-clamp"
-spec:
- capacity:
- storage: 2Gi
- accessModes:
- - ReadWriteMany
- persistentVolumeReclaimPolicy: Retain
- hostPath:
- path: {{ .Values.dataRootDir }}/{{ .Values.nsPrefix }}/clamp/mariadb/data
----
-kind: PersistentVolumeClaim
-apiVersion: v1
-metadata:
- name: clamp-db
- namespace: "{{ .Values.nsPrefix }}"
-spec:
- accessModes:
- - ReadWriteMany
- resources:
- requests:
- storage: 2Gi
- selector:
- matchLabels:
- name: "{{ .Values.nsPrefix }}-clamp"
-#{{ end }}
diff --git a/kubernetes/clamp/templates/configmap.yaml b/kubernetes/clamp/templates/configmap.yaml
new file mode 100644
index 0000000..1de3b2f
--- /dev/null
+++ b/kubernetes/clamp/templates/configmap.yaml
@@ -0,0 +1,12 @@
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+ spring_application_json: {{ .Values.config.springApplicationJson | quote }}
diff --git a/kubernetes/clamp/templates/deployment.yaml b/kubernetes/clamp/templates/deployment.yaml
new file mode 100644
index 0000000..d701e25
--- /dev/null
+++ b/kubernetes/clamp/templates/deployment.yaml
@@ -0,0 +1,71 @@
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: {{ .Values.replicaCount }}
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ initContainers:
+ - command:
+ - /root/ready.py
+ args:
+ - --container-name
+ - {{ .Values.mariadb.nameOverride }}
+ env:
+ - name: NAMESPACE
+ valueFrom:
+ fieldRef:
+ apiVersion: v1
+ fieldPath: metadata.namespace
+ image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ name: {{ include "common.name" . }}-readiness
+ containers:
+ - name: {{ include "common.name" . }}
+ image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+ imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+ ports:
+ - containerPort: {{ .Values.service.internalPort }}
+ # disable liveness probe when breakpoints set in debugger
+ # so K8s doesn't restart unresponsive container
+ {{- if eq .Values.liveness.enabled true }}
+ livenessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.liveness.periodSeconds }}
+ {{ end -}}
+ readinessProbe:
+ tcpSocket:
+ port: {{ .Values.service.internalPort }}
+ initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+ periodSeconds: {{ .Values.readiness.periodSeconds }}
+ env:
+ - name: SPRING_APPLICATION_JSON
+ valueFrom:
+ configMapKeyRef:
+ name: {{ template "common.fullname" . }}
+ key: spring_application_json
+ resources:
+{{ toYaml .Values.resources | indent 12 }}
+ {{- if .Values.nodeSelector }}
+ nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+ {{- end -}}
+ {{- if .Values.affinity }}
+ affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+ {{- end }}
+ imagePullSecrets:
+ - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/templates/service.yaml b/kubernetes/clamp/templates/service.yaml
new file mode 100644
index 0000000..91485a1
--- /dev/null
+++ b/kubernetes/clamp/templates/service.yaml
@@ -0,0 +1,25 @@
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.internalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/clamp/values.yaml b/kubernetes/clamp/values.yaml
index 103472a..e077531 100644
--- a/kubernetes/clamp/values.yaml
+++ b/kubernetes/clamp/values.yaml
@@ -1,13 +1,85 @@
-nsPrefix: onap
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+ nodePortPrefix: 302
+ repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:1.0.0
+ loggingRepository: docker.elastic.co
+ loggingImage: beats/filebeat:5.5.0
+
+subChartsOnly:
+ enabled: true
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp
pullPolicy: Always
-nodePortPrefix: 302
-mysqlPassword: strong_pitchou
-dataRootDir: /dockerdata-nfs
-clampReplicas: 1
-clampMariaDbReplicas: 1
-image:
- readiness: oomk8s/readiness-check:1.1.0
- clampImage: nexus3.onap.org:10001/onap/clamp
- clampVersion: v1.1.0
- mariadbImage: nexus3.onap.org:10001/mariadb
- mariadbVersion: 10.1.11
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+ mysqlPassword: strong_pitchou
+ dataRootDir: /dockerdata-nfs
+ springApplicationJson: '{
+ "spring.datasource.camunda.url": "jdbc:mariadb:sequential://clamp-mariadb.{{include "common.namespace" .}}:3306/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&retriesAllDown=2147483647&failoverLoopRetries=2147483647",
+ "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clamp-mariadb.{{include "common.namespace" .}}:3306/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&retriesAllDown=2147483647&failoverLoopRetries=2147483647"
+ }'
+
+# subchart configuration
+mariadb:
+ nameOverride: clampdb
+
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+ # necessary to disable liveness probe when setting breakpoints
+ # in debugger so K8s doesn't restart unresponsive container
+ enabled: true
+
+readiness:
+ initialDelaySeconds: 10
+ periodSeconds: 10
+
+
+service:
+ type: NodePort
+ name: clamp
+ internalPort: 8080
+ nodePort: 95
+
+ingress:
+ enabled: false
+
+resources: {}
+ # We usually recommend not to specify default resources and to leave this as a conscious
+ # choice for the user. This also increases chances charts run on environments with little
+ # resources, such as Minikube. If you do want to specify resources, uncomment the following
+ # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+ #
+ # Example:
+ # Configure resource requests and limits
+ # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+ # Minimum memory for development is 2 CPU cores and 4GB memory
+ # Minimum memory for production is 4 CPU cores and 8GB memory
+#resources:
+# limits:
+# cpu: 2
+# memory: 4Gi
+# requests:
+# cpu: 2
+# memory: 4Gi