Add AWX chart

Change-Id: Id9fe832a3eb3bfb23e96c711ac8455d1a8cb1156
Issue-ID: CCSDK-1316
Signed-off-by: Alexis de Talhouët <adetalhouet89@gmail.com>
diff --git a/kubernetes/contrib/charts/awx/Chart.yaml b/kubernetes/contrib/charts/awx/Chart.yaml
new file mode 100755
index 0000000..90f7380
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/Chart.yaml
@@ -0,0 +1,20 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Ansible AWX
+name: awx
+sources:
+  - https://github.com/ansible/awx
+version: 5.0.0
diff --git a/kubernetes/contrib/charts/awx/Makefile b/kubernetes/contrib/charts/awx/Makefile
new file mode 100644
index 0000000..d8a5033
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/Makefile
@@ -0,0 +1,16 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+make-awx:
+	cd charts && helm dep up awx-postgres
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/Chart.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/Chart.yaml
new file mode 100755
index 0000000..ae3befc
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Ansible AWX database
+name: awx-postgres
+version: 5.0.0
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/NOTES.txt b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/NOTES.txt
new file mode 100755
index 0000000..3ab092e
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/NOTES.txt
@@ -0,0 +1,33 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/deployment.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/deployment.yaml
new file mode 100755
index 0000000..3ac0e1a
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/deployment.yaml
@@ -0,0 +1,86 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+      - name: {{ include "common.name" . }}
+        image: {{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        ports:
+        - containerPort: {{ .Values.service.internalPort }}
+        readinessProbe:
+          exec:
+            command:
+            - /bin/sh
+            - -i
+            - -c
+            - psql -h 127.0.0.1 -U $POSTGRES_USER -q -d {{ .Values.config.postgresDB }}
+              -c 'SELECT 1'
+          initialDelaySeconds: 5
+          timeoutSeconds: 1
+        env:
+          - name: POSTGRES_USER
+            value: "{{ .Values.config.postgresUser }}"
+          - name: POSTGRES_PASSWORD
+            value: "{{ .Values.config.postgresPassword }}"
+          - name: POSTGRES_DB
+            value: "{{ .Values.config.postgresDB }}"
+        volumeMounts:
+        - mountPath: /etc/localtime
+          name: localtime
+          readOnly: true
+        - name: {{ include "common.fullname" . }}-data
+          mountPath: /var/lib/postgresql/data
+        resources:
+{{ include "common.resources" . | indent 12 }}
+      {{- if .Values.nodeSelector }}
+      nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+      {{- end -}}
+      {{- if .Values.affinity }}
+      affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+      {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+      {{- if .Values.persistence.enabled }}
+        - name: {{ include "common.fullname" . }}-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+      {{- else }}
+          emptyDir: {}
+      {{- end }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pv.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pv.yaml
new file mode 100755
index 0000000..a8cf9f6
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pv.yaml
@@ -0,0 +1,39 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+{{- if not .Values.persistence.storageClass -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
+{{- end -}}
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pvc.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pvc.yaml
new file mode 100755
index 0000000..52891ff
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/pvc.yaml
@@ -0,0 +1,50 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+{{- if not .Values.persistence.storageClass }}
+  selector:
+    matchLabels:
+      name: {{ include "common.fullname" . }}
+{{- end }}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+  storageClassName: ""
+{{- else }}
+  storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/service.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/service.yaml
new file mode 100755
index 0000000..9dffb53
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/templates/service.yaml
@@ -0,0 +1,42 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/contrib/charts/awx/charts/awx-postgres/values.yaml b/kubernetes/contrib/charts/awx/charts/awx-postgres/values.yaml
new file mode 100755
index 0000000..79fe510
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx-postgres/values.yaml
@@ -0,0 +1,83 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+global: # global defaults
+  nodePortPrefixExt: 304
+  persistence: {}
+
+# application image
+repository: docker.io
+image: postgres:10.4-alpine
+pullPolicy: Always
+
+# application configuration
+config:
+  postgresUser: awx
+  postgresPassword: awx
+  postgresDB: awx
+
+ingress:
+  enabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+  volumeReclaimPolicy: Retain
+
+  # Uncomment the storageClass parameter to use an existing PV
+  # that will match the following class.
+  # When uncomment the storageClass, the PV is not created anymore.
+
+  # storageClass: "nfs-dev-sc"
+
+  accessMode: ReadWriteMany
+  size: 1Gi
+
+  # When using storage class, mountPath and mountSubPath are
+  # simply ignored.
+
+  mountPath: /dockerdata-nfs
+  mountSubPath: awx/pgdata
+
+service:
+  type: ClusterIP
+  name: awx-postgresql
+  portName: awx-postgresql
+  internalPort: 5432
+  externalPort: 5432
+
+resources: {}
diff --git a/kubernetes/contrib/charts/awx/charts/awx/Chart.yaml b/kubernetes/contrib/charts/awx/charts/awx/Chart.yaml
new file mode 100755
index 0000000..1a34dcd
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: Ansible AWX application
+name: awx
+version: 5.0.0
diff --git a/kubernetes/contrib/charts/awx/charts/awx/resources/config/credentials.py b/kubernetes/contrib/charts/awx/charts/awx/resources/config/credentials.py
new file mode 100644
index 0000000..39350e0
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/resources/config/credentials.py
@@ -0,0 +1,36 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DATABASES = {
+    'default': {
+        'ATOMIC_REQUESTS': True,
+        'ENGINE': 'awx.main.db.profiled_pg',
+        'NAME': "{{ .Values.config.postgresDB }}",
+        'USER': "{{ .Values.config.postgresUser }}",
+        'PASSWORD': "{{ .Values.config.postgresPassword }}",
+        'HOST': "awx-postgresql",
+        'PORT': "5432",
+    }
+}
+BROKER_URL = 'amqp://{}:{}@{}:{}/{}'.format(
+    "{{ .Values.config.rabbitmqUser }}",
+    "{{ .Values.config.rabbitmqPassword }}",
+    "localhost",
+    "5672",
+    "{{ .Values.config.rabbitmqVhost }}")
+CHANNEL_LAYERS = {
+    'default': {'BACKEND': 'asgi_amqp.AMQPChannelLayer',
+                'ROUTING': 'awx.main.routing.channel_routing',
+                'CONFIG': {'url': BROKER_URL}}
+}
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/resources/config/environment.sh b/kubernetes/contrib/charts/awx/charts/awx/resources/config/environment.sh
new file mode 100644
index 0000000..7c58c6b
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/resources/config/environment.sh
@@ -0,0 +1,23 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+DATABASE_USER={{ .Values.config.postgresUser }}
+DATABASE_NAME={{ .Values.config.postgresDB }}
+DATABASE_HOST=awx-postgresql
+DATABASE_PORT=5432
+DATABASE_PASSWORD={{ .Values.config.postgresPassword }}
+MEMCACHED_HOST=localhost
+RABBITMQ_HOST=localhost
+AWX_ADMIN_USER={{ .Values.config.awxAdminUser }}
+AWX_ADMIN_PASSWORD={{ .Values.config.awxAdminPassword }}
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/configmap.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/configmap.yaml
new file mode 100644
index 0000000..9bc62b0
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/configmap.yaml
@@ -0,0 +1,146 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-init-mgnt
+  namespace: {{ include "common.namespace" . }}
+data:
+  entrypoint: |
+    #/bin/sh
+
+    awx-manage migrate --noinput
+    if [[ `echo 'from django.contrib.auth.models import User; nsu = User.objects.filter(is_superuser=True).count(); exit(0 if nsu > 0 else 1)' | awx-manage shell` > 0 ]]
+    then
+      echo 'from django.contrib.auth.models import User; User.objects.create_superuser('{{ .Values.config.awxAdminUser }}', '{{ .Values.config.awxAdminEmail }}', '{{ .Values.config.awxAdminPassword }}')' | awx-manage shell
+      awx-manage update_password --username='{{ .Values.config.awxAdminUser }}' --password='{{ .Values.config.awxAdminPassword }}'
+    fi
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-settings
+  namespace: {{ include "common.namespace" . }}
+data:
+  awx_settings: |
+    import os
+    import socket
+    ADMINS = ()
+
+    AWX_PROOT_ENABLED = True
+
+    # Automatically deprovision pods that go offline
+    AWX_AUTO_DEPROVISION_INSTANCES = True
+
+    SYSTEM_TASK_ABS_CPU = 6
+    SYSTEM_TASK_ABS_MEM = 20
+
+    INSIGHTS_URL_BASE = "https://example.org"
+
+    #Autoprovisioning should replace this
+    CLUSTER_HOST_ID = socket.gethostname()
+    SYSTEM_UUID = '00000000-0000-0000-0000-000000000000'
+
+    SESSION_COOKIE_SECURE = False
+    CSRF_COOKIE_SECURE = False
+
+    REMOTE_HOST_HEADERS = ['HTTP_X_FORWARDED_FOR']
+
+    STATIC_ROOT = '/var/lib/awx/public/static'
+    PROJECTS_ROOT = '/var/lib/awx/projects'
+    JOBOUTPUT_ROOT = '/var/lib/awx/job_status'
+    SECRET_KEY = open('/etc/tower/SECRET_KEY', 'rb').read().strip()
+    ALLOWED_HOSTS = ['*']
+    INTERNAL_API_URL = 'http://127.0.0.1:8052'
+    SERVER_EMAIL = 'root@localhost'
+    DEFAULT_FROM_EMAIL = 'webmaster@localhost'
+    EMAIL_SUBJECT_PREFIX = '[AWX] '
+    EMAIL_HOST = 'localhost'
+    EMAIL_PORT = 25
+    EMAIL_HOST_USER = ''
+    EMAIL_HOST_PASSWORD = ''
+    EMAIL_USE_TLS = False
+
+    LOGGING['handlers']['console'] = {
+        '()': 'logging.StreamHandler',
+        'level': 'DEBUG',
+        'formatter': 'simple',
+    }
+
+    LOGGING['loggers']['django.request']['handlers'] = ['console']
+    LOGGING['loggers']['rest_framework.request']['handlers'] = ['console']
+    LOGGING['loggers']['awx']['handlers'] = ['console']
+    LOGGING['loggers']['awx.main.commands.run_callback_receiver']['handlers'] = ['console']
+    LOGGING['loggers']['awx.main.commands.inventory_import']['handlers'] = ['console']
+    LOGGING['loggers']['awx.main.tasks']['handlers'] = ['console']
+    LOGGING['loggers']['awx.main.scheduler']['handlers'] = ['console']
+    LOGGING['loggers']['django_auth_ldap']['handlers'] = ['console']
+    LOGGING['loggers']['social']['handlers'] = ['console']
+    LOGGING['loggers']['system_tracking_migrations']['handlers'] = ['console']
+    LOGGING['loggers']['rbac_migrations']['handlers'] = ['console']
+    LOGGING['loggers']['awx.isolated.manager.playbooks']['handlers'] = ['console']
+    LOGGING['handlers']['callback_receiver'] = {'class': 'logging.NullHandler'}
+    LOGGING['handlers']['task_system'] = {'class': 'logging.NullHandler'}
+    LOGGING['handlers']['tower_warnings'] = {'class': 'logging.NullHandler'}
+    LOGGING['handlers']['rbac_migrations'] = {'class': 'logging.NullHandler'}
+    LOGGING['handlers']['system_tracking_migrations'] = {'class': 'logging.NullHandler'}
+    LOGGING['handlers']['management_playbooks'] = {'class': 'logging.NullHandler'}
+
+    CACHES = {
+        'default': {
+            'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
+            'LOCATION': '{}:{}'.format("localhost", "11211")
+        },
+        'ephemeral': {
+            'BACKEND': 'django.core.cache.backends.locmem.LocMemCache',
+        },
+    }
+
+    USE_X_FORWARDED_PORT = True
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-rabbitmq
+  namespace: {{ include "common.namespace" . }}
+data:
+  enabled_plugins: |
+    [rabbitmq_management,rabbitmq_peer_discovery_k8s].
+  rabbitmq.conf: |
+    ## Clustering
+    management.load_definitions = /etc/rabbitmq/rabbitmq_definitions.json
+    cluster_formation.peer_discovery_backend  = rabbit_peer_discovery_k8s
+    cluster_formation.k8s.host = kubernetes.default.svc
+    cluster_formation.k8s.address_type = ip
+    cluster_formation.node_cleanup.interval = 10
+    cluster_formation.node_cleanup.only_log_warning = false
+    cluster_partition_handling = autoheal
+    ## queue master locator
+    queue_master_locator=min-masters
+    ## enable guest user
+    loopback_users.guest = false
+  rabbitmq_definitions.json: |
+    {
+      "users":[{"name": "{{ .Values.config.rabbitmqUser }}", "password": "{{ .Values.config.rabbitmqPassword }}", "tags": ""}],
+      "permissions":[
+        {"user":"{{ .Values.config.rabbitmqUser }}","vhost":"{{ .Values.config.rabbitmqVhost }}","configure":".*","write":".*","read":".*"}
+      ],
+      "vhosts":[{"name":"{{ .Values.config.rabbitmqVhost }}"}],
+      "policies":[
+          {"vhost":"{{ .Values.config.rabbitmqVhost }}","name":"ha-all","pattern":".*","definition":{"ha-mode":"all","ha-sync-mode":"automatic"}}
+      ]
+    }
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/job.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/job.yaml
new file mode 100644
index 0000000..dd538ae
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/job.yaml
@@ -0,0 +1,125 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  backoffLimit: 5
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}-mgnt
+        release: {{ .Release.Name }}
+    spec:
+      serviceAccount: {{ include "common.fullname" . }}
+      serviceAccountName: {{ include "common.fullname" . }}
+      restartPolicy: Never
+      initContainers:
+      - name: {{ include "common.name" . }}-init-readiness
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - awx-postgres
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+      containers:
+      - command: ["/bin/sh","-c"]
+        args: ["/etc/tower/job-entrypoint.sh"]
+        image: "{{ .Values.repository }}/{{ .Values.image.task }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-mgnt
+        resources:
+          requests:
+            cpu: 1500m
+            memory: 2Gi
+        securityContext:
+          privileged: true
+        volumeMounts:
+        - mountPath: /etc/tower/job-entrypoint.sh
+          name: awx-mgnt
+          readOnly: true
+          subPath: job-entrypoint.py
+        - mountPath: /etc/tower/settings.py
+          name: awx-application-config
+          readOnly: true
+          subPath: settings.py
+        - mountPath: /etc/tower/conf.d/
+          name: awx-application-credentials
+          readOnly: true
+        - mountPath: /etc/tower/SECRET_KEY
+          name: awx-secret-key
+          readOnly: true
+          subPath: SECRET_KEY
+
+      volumes:
+      - configMap:
+          defaultMode: 0777
+          items:
+          - key: entrypoint
+            path: job-entrypoint.py
+          name: {{ include "common.fullname" . }}-init-mgnt
+        name: awx-mgnt
+      - configMap:
+          defaultMode: 420
+          items:
+          - key: awx_settings
+            path: settings.py
+          name: {{ include "common.fullname" . }}-settings
+        name: awx-application-config
+      - name: awx-application-credentials
+        secret:
+          defaultMode: 420
+          items:
+          - key: credentials_py
+            path: credentials.py
+          - key: environment_sh
+            path: environment.sh
+          secretName: {{ include "common.fullname" . }}-secrets
+      - name: awx-secret-key
+        secret:
+          defaultMode: 420
+          items:
+          - key: secret_key
+            path: SECRET_KEY
+          secretName: {{ include "common.fullname" . }}-secrets
+      - configMap:
+          defaultMode: 420
+          items:
+          - key: rabbitmq.conf
+            path: rabbitmq.conf
+          - key: enabled_plugins
+            path: enabled_plugins
+          - key: rabbitmq_definitions.json
+            path: rabbitmq_definitions.json
+          name: {{ include "common.fullname" . }}-rabbitmq
+        name: rabbitmq-config
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/secret.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/secret.yaml
new file mode 100644
index 0000000..8b504d5
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/secret.yaml
@@ -0,0 +1,31 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+apiVersion: v1
+kind: Secret
+type: Opaque
+metadata:
+  name: {{ include "common.fullname" . }}-secrets
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.fullname" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+  credentials_py: {{ tpl (.Files.Get "resources/config/credentials.py") . | b64enc }}
+  environment_sh: {{ tpl (.Files.Get "resources/config/environment.sh") . | b64enc }}
+  rabbitmq_erlang_cookie: {{ .Values.config.rabbitmqErlangCookie | b64enc | quote }}
+  secret_key: {{ .Values.config.secretKey | b64enc | quote }}
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/service.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/service.yaml
new file mode 100755
index 0000000..ed3fd72
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/service.yaml
@@ -0,0 +1,80 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}-rmq-mgmt
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.rmqmgmt.type }}
+  ports:
+    - port: {{ .Values.service.rmqmgmt.externalPort }}
+      targetPort: {{ .Values.service.rmqmgmt.internalPort }}
+      name: {{ .Values.service.rmqmgmt.portName }}
+  selector:
+    app: {{ include "common.fullname" . }}
+    release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}-web
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.web.type }}
+  ports:
+    - port: {{ .Values.service.web.externalPort }}
+      targetPort: {{ .Values.service.web.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefixExt | default .Values.nodePortPrefixExt }}{{ .Values.service.web.nodePort }}
+      name: {{ .Values.service.web.portName }}
+  selector:
+    app: {{ include "common.fullname" . }}
+    release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}-rabbitmq
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.fullname" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+    type: LoadBalancer
+spec:
+  type: {{ .Values.service.rabbitmq.type }}
+  ports:
+    - port: {{ .Values.service.rabbitmq.http.externalPort }}
+      targetPort: {{ .Values.service.rabbitmq.http.internalPort }}
+      name: {{ .Values.service.rabbitmq.http.portName }}
+    - port: {{ .Values.service.rabbitmq.amqp.externalPort }}
+      targetPort: {{ .Values.service.rabbitmq.amqp.internalPort }}
+      name: {{ .Values.service.rabbitmq.amqp.portName }}
+  selector:
+    app: {{ include "common.fullname" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/serviceaccout.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/serviceaccout.yaml
new file mode 100644
index 0000000..0f52ce8
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/serviceaccout.yaml
@@ -0,0 +1,47 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: Role
+metadata:
+  name: {{ include "common.fullname" . }}-endpoint-reader
+  namespace: {{ include "common.namespace" . }}
+rules:
+- apiGroups: ["", "extensions", "apps", "batch"]
+  resources: ["endpoints", "deployments", "pods", "replicasets/status", "jobs/status"]
+  verbs: ["get", "list"]
+---
+apiVersion: v1
+items:
+- apiVersion: rbac.authorization.k8s.io/v1
+  kind: RoleBinding
+  metadata:
+    name: {{ include "common.fullname" . }}-endpoint-reader
+    namespace: {{ include "common.namespace" . }}
+  roleRef:
+    apiGroup: rbac.authorization.k8s.io
+    kind: Role
+    name: {{ include "common.fullname" . }}-endpoint-reader
+  subjects:
+  - kind: ServiceAccount
+    name: {{ include "common.fullname" . }}
+kind: List
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/templates/statefulset.yaml b/kubernetes/contrib/charts/awx/charts/awx/templates/statefulset.yaml
new file mode 100644
index 0000000..bf85447
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/templates/statefulset.yaml
@@ -0,0 +1,213 @@
+{{/*
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+apiVersion: apps/v1
+kind: StatefulSet
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  podManagementPolicy: OrderedReady
+  replicas: {{ .Values.replicaCount }}
+  serviceName: {{ include "common.fullname" . }}
+  selector:
+    matchLabels:
+      app: {{ include "common.fullname" . }}
+      name: {{ include "common.name" . }}-web-deploy
+      service: django
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.fullname" . }}
+        name: {{ include "common.name" . }}-web-deploy
+        release: {{ .Release.Name }}
+        service: django
+    spec:
+
+      initContainers:
+      - name: {{ include "common.name" . }}-init-readiness
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - {{ include "common.name" . }}-mgnt
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+
+      containers:
+
+      - image: "{{ .Values.repository }}/{{ .Values.image.web }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-web
+        ports:
+        - containerPort: {{ .Values.service.web.internalPort }}
+          protocol: TCP
+        resources:
+          requests:
+            cpu: 500m
+            memory: 1Gi
+        volumeMounts:
+        - mountPath: /etc/tower/settings.py
+          name: awx-application-config
+          readOnly: true
+          subPath: settings.py
+        - mountPath: /etc/tower/conf.d/
+          name: awx-application-credentials
+          readOnly: true
+        - mountPath: /etc/tower/SECRET_KEY
+          name: awx-secret-key
+          readOnly: true
+          subPath: SECRET_KEY
+      - command: ["/bin/sh","-c"]
+        args: ["/usr/bin/launch_awx_task.sh"]
+        env:
+        - name: AWX_SKIP_MIGRATIONS
+          value: "1"
+
+        image: "{{ .Values.repository }}/{{ .Values.image.task }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-celery
+        resources:
+          requests:
+            cpu: 1500m
+            memory: 2Gi
+        securityContext:
+          privileged: true
+        volumeMounts:
+        - mountPath: /etc/tower/settings.py
+          name: awx-application-config
+          readOnly: true
+          subPath: settings.py
+        - mountPath: /etc/tower/conf.d/
+          name: awx-application-credentials
+          readOnly: true
+        - mountPath: /etc/tower/SECRET_KEY
+          name: awx-secret-key
+          readOnly: true
+          subPath: SECRET_KEY
+      - env:
+        - name: MY_POD_IP
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: status.podIP
+        - name: RABBITMQ_USE_LONGNAME
+          value: "true"
+        - name: RABBITMQ_NODENAME
+          value: rabbit@$(MY_POD_IP)
+        - name: RABBITMQ_ERLANG_COOKIE
+          valueFrom:
+            secretKeyRef:
+              key: rabbitmq_erlang_cookie
+              name: {{ include "common.fullname" . }}-secrets
+        - name: K8S_SERVICE_NAME
+          value: {{ include "common.servicename" . }}-rabbitmq
+
+        image: "{{ .Values.repository }}/{{ .Values.image.rabbitmq }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-rabbit
+        livenessProbe:
+          exec:
+            command:
+            - rabbitmqctl
+            - status
+          failureThreshold: 3
+          initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.liveness.periodSeconds }}
+          successThreshold: 1
+          timeoutSeconds: 10
+        ports:
+        - containerPort: {{ .Values.service.rabbitmq.http.internalPort }}
+          name: {{ .Values.service.rabbitmq.http.portName }}
+          protocol: TCP
+        - containerPort: {{ .Values.service.rabbitmq.amqp.internalPort }}
+          name: {{ .Values.service.rabbitmq.amqp.portName }}
+          protocol: TCP
+        readinessProbe:
+          exec:
+            command:
+            - rabbitmqctl
+            - status
+          failureThreshold: 3
+          initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+          periodSeconds: {{ .Values.liveness.periodSeconds }}
+          successThreshold: 1
+          timeoutSeconds: 10
+        resources:
+          requests:
+            cpu: 500m
+            memory: 2Gi
+        volumeMounts:
+        - mountPath: /etc/rabbitmq
+          name: rabbitmq-config
+
+      - image: "{{ .Values.image.memcached }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-memcached
+        resources:
+          requests:
+            cpu: 500m
+            memory: 1Gi
+      serviceAccount: {{ include "common.fullname" . }}
+      serviceAccountName: {{ include "common.fullname" . }}
+      volumes:
+      - configMap:
+          defaultMode: 420
+          items:
+          - key: awx_settings
+            path: settings.py
+          name: {{ include "common.fullname" . }}-settings
+        name: awx-application-config
+      - name: awx-application-credentials
+        secret:
+          defaultMode: 420
+          items:
+          - key: credentials_py
+            path: credentials.py
+          - key: environment_sh
+            path: environment.sh
+          secretName: {{ include "common.fullname" . }}-secrets
+      - name: awx-secret-key
+        secret:
+          defaultMode: 420
+          items:
+          - key: secret_key
+            path: SECRET_KEY
+          secretName: {{ include "common.fullname" . }}-secrets
+      - configMap:
+          defaultMode: 420
+          items:
+          - key: rabbitmq.conf
+            path: rabbitmq.conf
+          - key: enabled_plugins
+            path: enabled_plugins
+          - key: rabbitmq_definitions.json
+            path: rabbitmq_definitions.json
+          name: {{ include "common.fullname" . }}-rabbitmq
+        name: rabbitmq-config
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/charts/awx/values.yaml b/kubernetes/contrib/charts/awx/charts/awx/values.yaml
new file mode 100755
index 0000000..5974de3
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/charts/awx/values.yaml
@@ -0,0 +1,111 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for mariadb.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+global: # global defaults
+  nodePortPrefixExt: 304
+  persistence: {}
+
+# application image
+repository: ansible
+image:
+  web: awx_web:latest
+  task: awx_task:latest
+  rabbitmq: awx_rabbitmq:3.7.4
+  memcached: memcached:latest
+pullPolicy: Always
+
+# application configuration
+config:
+  postgresUser: awx
+  postgresPassword: awx
+  postgresDB: awx
+# RabbitMQ Configuration
+  rabbitmqUser: awx
+  rabbitmqPassword: awxpass
+  rabbitmqVhost: awx
+  rabbitmqErlangCookie: cookiemonster3
+# This will create or update a default admin (superuser) account in AWX, if not provided
+# then these default values are used
+  awxAdminUser: admin
+  awxAdminPassword: password
+  awxAdminEmail: cds@onap.org
+# AWX Secret key
+# It's *very* important that this stay the same between upgrades or you will lose the ability to decrypt
+# your credentials
+  secretKey: awxsecret
+
+ingress:
+  enabled: false
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  enabled: true
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+  volumeReclaimPolicy: Retain
+
+  # Uncomment the storageClass parameter to use an existing PV
+  # that will match the following class.
+  # When uncomment the storageClass, the PV is not created anymore.
+
+  # storageClass: "nfs-dev-sc"
+
+  accessMode: ReadWriteMany
+  size: 5Gi
+
+  # When using storage class, mountPath and mountSubPath are
+  # simply ignored.
+
+  mountPath: /dockerdata-nfs
+  mountSubPath: awx/pgdata
+
+service:
+  rmqmgmt:
+    type: ClusterIP
+    portName: rmqmgmt
+    internalPort: 15672
+    externalPort: 15672
+  web:
+    type: NodePort
+    portName: web
+    internalPort: 8052
+    externalPort: 80
+    nodePort: 78
+  rabbitmq:
+    type: ClusterIP
+    http:
+      portName: http
+      internalPort: 15672
+      externalPort: 15672
+    amqp:
+      portName: amqp
+      internalPort: 5672
+      externalPort: 5672
+
+resources: {}
diff --git a/kubernetes/contrib/charts/awx/requirements.yaml b/kubernetes/contrib/charts/awx/requirements.yaml
new file mode 100755
index 0000000..486fc65
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~4.x-0
+    repository: '@local'
\ No newline at end of file
diff --git a/kubernetes/contrib/charts/awx/values.yaml b/kubernetes/contrib/charts/awx/values.yaml
new file mode 100755
index 0000000..6c6a90e
--- /dev/null
+++ b/kubernetes/contrib/charts/awx/values.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2019 Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefixExt: 304
+  commonConfigPrefix: awx
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.2
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: hub.docker.io
+pullPolicy: Always
+
+# default number of instances
+replicaCount: 1
+nodeSelector: {}
+affinity: {}
+
+ingress:
+  enabled: false
+
+resources: {}