diff --git a/bash/tools/common-functions.sh b/bash/tools/common-functions.sh
new file mode 100644
index 0000000..ac05fe1
--- /dev/null
+++ b/bash/tools/common-functions.sh
@@ -0,0 +1,554 @@
+#   COPYRIGHT NOTICE STARTS HERE
+#
+#   Copyright 2018 © Samsung Electronics Co., Ltd.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#   COPYRIGHT NOTICE ENDS HERE
+#
+# this file contains shared variables and functions for the onap installer
+#
+# any script which needs this file can check this variable
+# and it will know immediately if the functions and variables
+# are loaded and usable
+IS_COMMON_FUNCTIONS_SOURCED=YES
+# setting of the path variables
+if [ -z "$APROJECT_DIR" ] ; then
+    INCLUDE_PATH="${LOCAL_PATH}"/"${RELATIVE_PATH}"
+    APROJECT_DIR=$(readlink -f "$INCLUDE_PATH"/../..)
+fi
+RESOURCES_DIR="$APROJECT_DIR/resources"
+BASH_SCRIPTS_DIR="$APROJECT_DIR/bash"
+NEXUS_DATA="$RESOURCES_DIR/nexus_data"
+CERTS_TARGET_PATH="$APROJECT_DIR/live/certs"
+NGINX_LOG_DIR="$APROJECT_DIR/live/nginx_logs"
+GEN_CFG_PATH="$APROJECT_DIR/live/cfg"
+GIT_REPOS="$RESOURCES_DIR/git-repo"
+NGINX_HTTP_DIR="$RESOURCES_DIR/http"
+RHEL_REPO="$RESOURCES_DIR/pkg/rhel"
+PATH="${PATH}:/usr/local/bin:/usr/local/sbin"
+export PATH
+# just self-defense against locale
+LANG=C
+export LANG
+# dns handling
+SIMUL_HOSTS="gcr.io \
+git.rancher.io \
+gerrit.onap.org \
+registry-1.docker.io \
+docker.io \
+registry.npmjs.org \
+nexus3.onap.org \
+nexus.onap.org \
+docker.elastic.co \
+www.getcloudify.org \
+www.springframework.org \
+registry.hub.docker.com \
+git.onap.org \
+repo1.maven.org \
+repo.maven.apache.org"
+# default credentials to the repository
+NEXUS_USERNAME=admin
+NEXUS_PASSWORD=admin123
+NEXUS_EMAIL=admin@onap.org
+# this function is intended to unify the installer output
+message() {
+    case "$1" in
+        info)
+            echo 'INFO:' "$@"
+            ;;
+        debug)
+            echo 'DEBUG:' "$@" >&2
+            ;;
+        warning)
+            echo 'WARNING [!]:' "$@" >&2
+            ;;
+        error)
+            echo 'ERROR [!!]:' "$@" >&2
+            return 1
+            ;;
+        *)
+            echo 'UNKNOWN [?!]:' "$@" >&2
+            return 2
+            ;;
+    esac
+    return 0
+}
+export message
+# if the environment variable DEBUG is set to DEBUG-ONAP ->
+#  -> this function will print its arguments
+# otherwise nothing is done
+debug() {
+    [ "$DEBUG" = DEBUG-ONAP ] && message debug "$@"
+}
+export debug
+fail() {
+    message error "$@"
+    exit 1
+}
+retry() {
+    local n=1
+    local max=5
+    while ! "$@"; do
+        if [ $n -lt $max ]; then
+            n=$((n + 1))
+            message warning "Command ${@} failed. Attempt: $n/$max"
+            message info "waiting 10s for another try..."
+            sleep 10s
+        else
+            fail "Command ${@} failed after $n attempts. Better to abort now."
+        fi
+    done
+}
+may_self_extract() {
+    # extract and untar to the current directory
+    sed '0,/^# PAYLOAD BELOW #$/d' "$0" | tar -xvpf - ;
+}
+update_hosts() {
+    if grep -q "^[^#]\+\s$SIMUL_HOSTS\s*\$" /etc/hosts ; then
+        message info "simulated domains already in /etc/hosts"
+    else
+        echo "$LOCAL_IP $SIMUL_HOSTS" >> /etc/hosts
+        message info "simulated domains added to /etc/hosts (please check it)"
+    fi
+    if grep -q "^[^#]\+\s$NEXUS_FQDN\s*\$" /etc/hosts ; then
+        message info "nexus FQDN already in /etc/hosts"
+    else
+        echo "$LOCAL_IP $NEXUS_FQDN" >> /etc/hosts
+        message info "Nexus FQDN added to /etc/hosts (please check it)"
+    fi
+    if grep -q "^[^#]\+\srepo.install-server\s*\$" /etc/hosts ; then
+        message info "custom repo FQDN already in /etc/hosts"
+    else
+        echo "$LOCAL_IP repo.install-server" >> /etc/hosts
+        message info "Nexus FQDN added to /etc/hosts (please check it)"
+    fi
+}
+get_cfg_val() {
+    name="$1"
+    shift
+    ask="$@"
+    value=$(eval "echo \$${name}")
+    if [ -z "$value" ]; then
+        while [ -z "$value" ] ; do
+            printf "${ask}"
+            read -r $name
+            value=$(eval "echo \$${name}")
+        done
+        echo "${name}='${value}'" >> ./local_repo.conf
+    fi
+}
+get_configuration() {
+    if [ -f ./local_repo.conf ]; then
+        . ./local_repo.conf
+    fi
+    if [ -z "${NEXUS_FQDN}" ]; then
+        NEXUS_FQDN="nexus.$HOSTNAME"
+        echo "NEXUS_FQDN='${NEXUS_FQDN}'" >> ./local_repo.conf
+    fi
+    if [ -z "${ONAP_SCALE}" ]; then
+        ONAP_SCALE=full
+        echo "ONAP_SCALE='${ONAP_SCALE}'" >> ./local_repo.conf
+    fi
+    # nexus should be configured using those default entries
+    # if it was not put the correct inputs instead
+    if [ -z "${NPM_USERNAME}" ]; then
+        NPM_USERNAME="${NEXUS_USERNAME}"
+        echo "NPM_USERNAME='${NPM_USERNAME}'" >> ./local_repo.conf
+    fi
+    if [ -z "${NPM_PASSWORD}" ]; then
+        NPM_PASSWORD="${NEXUS_PASSWORD}"
+        echo "NPM_PASSWORD='${NPM_PASSWORD}'" >> ./local_repo.conf
+    fi
+    if [ -z "${NPM_EMAIL}" ]; then
+        NPM_EMAIL="$NEXUS_EMAIL"
+        echo "NPM_EMAIL='${NPM_EMAIL}'" >> ./local_repo.conf
+    fi
+    export NEXUS_FQDN
+    export ONAP_SCALE
+    export NPM_USERNAME
+    export NPM_PASSWORD
+    export NPM_EMAIL
+    NODE_USERNAME="root"
+    if [ -z "$LOCAL_IP" ] ; then
+        echo
+        echo "======= Mandatory configuration ======="
+        echo
+        message info "fill in these mandatory configuration values"
+        get_cfg_val "LOCAL_IP" "Enter the public IPv4 used for this '$HOSTNAME' install machine," \
+            "\nDO NOT USE LOOPBACK! (for example: 10.0.0.1): "
+    fi
+}
+enable_local_repo() {
+    sed -r "s%PATH%file://$APROJECT_DIR/resources/pkg/rhel%" "$APROJECT_DIR/resources/pkg/rhel/onap.repo" > /etc/yum.repos.d/onap.repo
+}
+install_packages() {
+    os_id="$1"
+    message info "Installing packages"
+    case "$os_id" in
+        centos)
+            yum -y install "$APROJECT_DIR/resources/pkg/centos/*.rpm"
+            ;;
+        rhel)
+            enable_local_repo
+            yum -y install docker-ce dnsmasq icewm firefox tigervnc-server
+            systemctl enable docker
+            systemctl start docker
+            ;;
+        ubuntu)
+            dpkg -i "$APROJECT_DIR/resources/pkg/ubuntu/*.deb"
+            ;;
+        *)
+            message error "OS release is not supported: $os_id"
+            message info "ABORTING INSTALLATION"
+            exit 1
+            ;;
+    esac
+}
+install_files() {
+    message info "installation of external binaries"
+    for binary in kubectl helm rancher jq ; do
+        cp "$APROJECT_DIR/resources/downloads/${binary}" /usr/local/bin/
+        chmod 755 "/usr/local/bin/${binary}"
+    done
+    mkdir ~/.kube
+}
+setup_vnc_server() {
+    mkdir -p ~/.vnc ~/.icewm
+    echo "onap" | vncpasswd -f > ~/.vnc/passwd
+    chmod 0600 ~/.vnc/passwd
+    cat > ~/.vnc/xstartup <<EOF
+#!/bin/sh
+unset SESSION_MANAGER
+unset DBUS_SESSION_BUS_ADDRESS
+exec icewm-session
+EOF
+chmod +x ~/.vnc/xstartup
+    cat > ~/.icewm/menu <<EOF
+prog Firefox firefox firefox
+separator
+EOF
+vncserver
+}
+update_docker_cfg() {
+    if [ -f "/etc/docker/daemon.json" ]; then
+        jq '.dns += ["172.17.0.1"]' /etc/docker/daemon.json > /tmp/daemon.json
+        mv /tmp/daemon.json /etc/docker/daemon.json
+    else
+        echo '{"dns": ["172.17.0.1"]}' > /etc/docker/daemon.json
+    fi
+}
+create_root_CA() {
+    echo "** Generate certificates **"
+    openssl genrsa -out $CERTS_TARGET_PATH/rootCA.key 4096
+    echo "** Generate self signed ***"
+    openssl req -config $GEN_CFG_PATH/cacert.cnf -key $CERTS_TARGET_PATH/rootCA.key -new -x509 -days 7300 -sha256 -extensions v3_ca \
+                  -out $CERTS_TARGET_PATH/rootCAcert.pem
+    # convert to crt
+    openssl x509 -in $CERTS_TARGET_PATH/rootCAcert.pem -inform PEM -out $CERTS_TARGET_PATH/rootCAcert.crt
+}
+install_root_CA() {
+    os=$1
+    echo "** Publishing root CA **"
+    if [ "$os" == "redhat" ]; then
+        # for centos
+        update-ca-trust force-enable
+        cp $CERTS_TARGET_PATH/rootCAcert.crt /etc/pki/ca-trust/source/anchors/
+        update-ca-trust extract
+    elif [ "$os" == "ubuntu" ]; then
+        mkdir -p /usr/local/share/ca-certificates/extra
+        cp $CERTS_TARGET_PATH/rootCAcert.crt /usr/local/share/ca-certificates/extra
+        update-ca-certificates
+    else
+        echo "OS \"$os\" is not supported"
+        exit -2
+    fi
+    echo "** Restart docker (because of reload new CA) **"
+    systemctl restart docker
+}
+create_cert() {
+    server_name=$1
+    openssl genrsa -out $CERTS_TARGET_PATH/${server_name}_server.key 4096
+    echo "** Generate sig request ***"
+    openssl req -new -config $GEN_CFG_PATH/${server_name}_cert.cnf -key $CERTS_TARGET_PATH/${server_name}_server.key -out $CERTS_TARGET_PATH/${server_name}_server.csr
+    # v3.ext must be in separate file , because of bug in openssl 1.0
+    echo "** sign **"
+    openssl x509 -req -in $CERTS_TARGET_PATH/${server_name}_server.csr\
+    -extfile $GEN_CFG_PATH/v3.ext\
+    -CA $CERTS_TARGET_PATH/rootCAcert.crt\
+    -CAkey $CERTS_TARGET_PATH/rootCA.key\
+    -CAcreateserial -out $CERTS_TARGET_PATH/${server_name}_server.crt -days 3650 -sha256
+}
+create_all_certs() {
+    create_cert "nexus"
+}
+update_firewall() {
+#TODO
+return 0
+}
+distribute_root_CA() {
+    targetip=$1
+    scp $APROJECT_DIR/install_cacert.sh $targetip:.
+    ssh $targetip ./install_cacert.sh
+    echo "** Add DNS record to remote host **"
+    ssh $targetip "echo nameserver $LOCAL_IP > /etc/resolv.conf"
+}
+remote_setup_nfs_server() {
+    os=$1
+    targetip=$2
+    shift 2
+    scp $APROJECT_DIR/bash/tools/setup_nfs_server_${os}.sh $targetip:setup_nfs_server.sh
+    if [[ $os == "ubuntu" ]]; then
+        scp -r $APROJECT_DIR/resources/pkg/ubuntu/nfs-common-pkg/* $targetip:.
+        ssh $targetip dpkg -i *.deb
+    fi
+    ssh $targetip /bin/bash ./setup_nfs_server.sh "$@"
+}
+remote_setup_nfs_mount() {
+    os=$1
+    targetip=$2
+    nfsip=$3
+    scp $APROJECT_DIR/bash/tools/setup_nfs_mount.sh $targetip:.
+    if [[ $os == "ubuntu" ]]; then
+        scp -r $APROJECT_DIR/resources/pkg/ubuntu/nfs-common-pkg/* $targetip:.
+        ssh $targetip dpkg -i *.deb
+    fi
+    ssh $targetip /bin/bash ./setup_nfs_mount.sh $nfsip
+}
+enable_remote_repo() {
+    targetip=$1
+    sed -r "s%PATH%http://repo.install-server%" $APROJECT_DIR/resources/pkg/rhel/onap.repo | ssh $targetip 'cat > /etc/yum.repos.d/onap.repo'
+}
+install_remote_docker() {
+    targetip=$1
+    os=$2
+    if [[ $os == "ubuntu" ]]; then
+        scp -r $APROJECT_DIR/resources/pkg/ubuntu/{docker-ce_17.03.2~ce-0~ubuntu-xenial_amd64.deb,libltdl7_2.4.6-0.1_amd64.deb} $targetip:.
+        ssh $targetip dpkg -i *.deb
+    elif [[ $os == "rhel" ]]; then
+        ssh $targetip yum -y install docker-ce
+    fi
+    ssh $targetip "mkdir -p /etc/docker"
+    scp "$APROJECT_DIR/resources/downloads/jq" $targetip:/usr/local/bin/
+    ssh $targetip "if [[ -f /etc/docker/daemon.json ]]; then
+                       jq '.dns += [\"$LOCAL_IP\"]' /etc/docker/daemon.json > /tmp/daemon.json
+                       mv /tmp/daemon.json /etc/docker/daemon.json
+                   else
+                       echo {'\"'dns'\"': ['\"'$LOCAL_IP'\"']} > /etc/docker/daemon.json
+                   fi"
+    ssh $targetip 'systemctl enable docker; systemctl restart docker'
+}
+deploy_rancher() {
+    docker run -d --entrypoint "/bin/bash" --restart=unless-stopped -p 8080:8080 \
+    -v $CERTS_TARGET_PATH:/usr/local/share/ca-certificates/extra:ro \
+    --name rancher_server rancher/server:v1.6.14 \
+    -c "/usr/sbin/update-ca-certificates;/usr/bin/entry /usr/bin/s6-svscan /service"
+    echo "** wait until rancher is ready **"
+}
+deploy_kubernetes() {
+    os=$1
+    set +e
+    for i in `seq 5 -1 1`; do
+        API_RESPONSE=`curl -s 'http://127.0.0.1:8080/v2-beta/apikey' \
+            -d '{"type":"apikey","accountId":"1a1","name":"autoinstall"\
+                 ,"description":"autoinstall","created":null,"kind":null,\
+                 "removeTime":null,"removed":null,"uuid":null}'`
+        if [[ "$?" -eq 0 ]]; then
+            KEY_PUBLIC=`echo $API_RESPONSE | jq -r .publicValue`
+            KEY_SECRET=`echo $API_RESPONSE | jq -r .secretValue`
+            break
+        fi
+        echo "Waiting for rancher server to start"
+        sleep 60
+    done
+    set -e
+    export RANCHER_URL=http://${LOCAL_IP}:8080
+    export RANCHER_ACCESS_KEY=$KEY_PUBLIC
+    export RANCHER_SECRET_KEY=$KEY_SECRET
+    rancher env ls
+    echo "wait 60 sec for rancher environments can settle before we create the onap kubernetes one"
+    sleep 60
+    rancher env create -t kubernetes onap > kube_env_id.json
+    PROJECT_ID=$(<kube_env_id.json)
+    echo "env id: $PROJECT_ID"
+    export RANCHER_HOST_URL=http://${LOCAL_IP}:8080/v1/projects/$PROJECT_ID
+    for i in `seq 5`; do
+        status=$(rancher env ls | grep $PROJECT_ID | awk '{print $4}')
+        if [[ "$status" == "active" ]]; then
+            echo "Check on environments again before registering the URL response"
+            rancher env ls
+            break
+        fi
+        echo "Wait for environment to become active"
+        sleep 30
+    done
+    REG_URL_RESPONSE=`curl -X POST -u $KEY_PUBLIC:$KEY_SECRET -H 'Accept: application/json' -H 'ContentType: application/json' -d '{"name":"$LOCAL_IP"}' "http://$LOCAL_IP:8080/v1/projects/$PROJECT_ID/registrationtokens"`
+    echo "wait for server to finish url configuration - 3 min"
+    sleep 180
+    # see registrationUrl in
+    REGISTRATION_TOKENS=`curl http://127.0.0.1:8080/v2-beta/registrationtokens`
+    REGISTRATION_DOCKER=`echo $REGISTRATION_TOKENS | jq -r .data[0].image`
+    REGISTRATION_TOKEN=`echo $REGISTRATION_TOKENS | jq -r .data[0].token`
+    # base64 encode the kubectl token from the auth pair
+    # generate this after the host is registered
+    KUBECTL_TOKEN=$(echo -n 'Basic '$(echo -n "$RANCHER_ACCESS_KEY:$RANCHER_SECRET_KEY" | base64 -w 0) | base64 -w 0)
+    echo "KUBECTL_TOKEN base64 encoded: ${KUBECTL_TOKEN}"
+    cat > ~/.kube/config <<EOF
+apiVersion: v1
+kind: Config
+clusters:
+- cluster:
+    api-version: v1
+    insecure-skip-tls-verify: true
+    server: "https://$LOCAL_IP:8080/r/projects/$PROJECT_ID/kubernetes:6443"
+  name: "onap"
+contexts:
+- context:
+    cluster: "onap"
+    user: "onap"
+  name: "onap"
+current-context: "onap"
+users:
+- name: "onap"
+  user:
+    token: "$KUBECTL_TOKEN"
+EOF
+    if [[ $os == "rhel" ]]; then
+        echo "Upgrade datavolume for RHEL"
+        KUBELET_ID=`curl http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/ | jq -r '.data[] | select(.name=="kubelet")'.id`
+        OLD_LAUNCH_CONFIG=`curl http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID} | jq  '.launchConfig'`
+        NEW_LAUNCH_CONFIG=`echo $OLD_LAUNCH_CONFIG | jq '.dataVolumes[2]="/sys/fs/cgroup:/sys/fs/cgroup:ro,rprivate"'`
+        DATA="{
+                \"inServiceStrategy\": {
+                  \"batchSize\": 1,
+                  \"intervalMillis\": 2000,
+                  \"startFirst\": false,
+                  \"launchConfig\": ${NEW_LAUNCH_CONFIG},
+                  \"secondaryLaunchConfigs\": []
+                }
+        }"
+        curl -s -u $KEY_PUBLIC:$KEY_SECRET -X POST -H 'Content-Type: application/json' -d "${DATA}" "http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID}?action=upgrade" > /dev/null
+        echo "Give environment time to update (30 sec)"
+        sleep 30
+        curl -s -u $KEY_PUBLIC:$KEY_SECRET -X POST "http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID}?action=finishupgrade" > /dev/null
+    fi
+}
+deploy_rancher_agent() {
+    nodeip=$1
+    if [ -z "$REGISTRATION_DOCKER" ]; then
+        echo "ASSERT: Missing REGISTRATION_DOCKER"
+        exit 1
+    fi
+    if [ -z "$RANCHER_URL" ]; then
+        echo "ASSERT: Missing RANCHER_URL"
+        exit 1
+    fi
+    if [ -z "$REGISTRATION_TOKEN" ]; then
+        echo "ASSERT: Missing REGISTRATION_TOKEN"
+        exit 1
+    fi
+    ssh $nodeip "docker run --rm --privileged -v /var/run/docker.sock:/var/run/docker.sock -v /var/lib/racher:/var/lib/rancher $REGISTRATION_DOCKER $RANCHER_URL/v1/scripts/$REGISTRATION_TOKEN"
+    echo "waiting 2 min for creating kubernetes environment"
+    sleep 120
+}
+deploy_node() {
+    nodeip=$1
+    os=$2
+    echo "Deploying node $nodeip"
+    distribute_root_CA $nodeip
+    install_remote_docker $nodeip $os
+    deploy_rancher_agent $nodeip
+}
+deploy_onap() {
+    pushd $APROJECT_DIR/resources/oom/kubernetes
+    helm init --upgrade --skip-refresh
+    # this might fail
+    set +e
+    helm repo remove stable
+    set -e
+    helm serve &
+    echo "wait a moment before helm will come up ..."
+    sleep 5
+    helm repo add local http://127.0.0.1:8879
+    make all
+    #Pass the CA certificate contents directly during installation.
+    helm install local/onap -n dev --namespace onap \
+      --set "global.cacert=$(cat ${CERTS_TARGET_PATH}/rootCAcert.crt)"
+    popd
+}
+expand_file() {
+    file=$1
+    # print warning if patched file does not exist as some charts
+    # might not be available for some deployments
+    if [ ! -f "$file" ]; then
+      echo "WARNING: Can't patch file $file because this file does not exists."
+      return 0
+    fi
+    shift
+    for ivar in "$@" ; do
+        ivalue=$(eval 'echo "$'${ivar}'"')
+        sed -i "s#${ivar}#${ivalue}#g" "$file"
+    done
+}
+patch_npm_oom() {
+    if [ -z "$LOCAL_IP" ] ; then
+        echo "ERROR: LOCAL_IP unset"
+        return 1
+    fi
+    if [ -z "$NEXUS_FQDN" ] ; then
+        echo "ERROR: NEXUS_FQDN unset"
+        return 1
+    fi
+    UPDATE_HOSTS_FILE="$LOCAL_IP $NEXUS_FQDN"
+    UPDATE_NPM_REGISTRY="npm set registry \"http://${NEXUS_FQDN}/repository/npm-private/\""
+    expand_file $APROJECT_DIR/resources/oom/kubernetes/common/dgbuilder/templates/deployment.yaml \
+        UPDATE_HOSTS_FILE \
+        UPDATE_NPM_REGISTRY
+    expand_file $APROJECT_DIR/resources/oom/kubernetes/sdnc/charts/sdnc-portal/templates/deployment.yaml \
+        UPDATE_HOSTS_FILE \
+        UPDATE_NPM_REGISTRY
+}
+patch_spring_oom() {
+    if [ -z "$LOCAL_IP" ] ; then
+        echo "ERROR: LOCAL_IP unset"
+        return 1
+    fi
+    UPDATE_HOSTS_FILE="$LOCAL_IP www.springframework.org"
+    expand_file $APROJECT_DIR/resources/oom/kubernetes/dmaap/charts/message-router/templates/deployment.yaml \
+        UPDATE_HOSTS_FILE
+}
+patch_cfy_manager_depl() {
+    os="$1"
+    file="${APROJECT_DIR}/resources/oom/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml"
+    case "$os" in
+        centos|rhel)
+            CERT_PATH="/etc/pki/ca-trust/source/anchors"
+            ;;
+        ubuntu)
+            CERT_PATH="/usr/local/share/ca-certificates/extra"
+            ;;
+        '')
+            echo "ERROR: missing argument"
+            return 1
+            ;;
+        *)
+            echo "ERROR: unknown OS: ${os}"
+            return 1
+            ;;
+    esac
+    expand_file "$file" CERT_PATH
+}
+copy_onap_values_file() {
+    cp "${APROJECT_DIR}/cfg/${ONAP_SCALE}_depl_values.yaml" \
+        "${APROJECT_DIR}/resources/oom/kubernetes/onap/values.yaml"
+}
\ No newline at end of file