###
# ============LICENSE_START=======================================================
# ONAP CLAMP
# ================================================================================
# Copyright (C) 2017-2019 AT&T Intellectual Property. All rights
#                             reserved.
# ================================================================================
# Modifications copyright (c) 2019 Nokia
# ================================================================================\
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ============LICENSE_END============================================
# ===================================================================
#
###

### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
### (See below for the parameter 'server.http.port' if you want to have both enabled)
### To have only HTTP, keep the lines server.ssl.* commented
### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
### server.port=8080
### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
#server.ssl.key-store=file:/tmp/mykey.jks
#server.ssl.key-store-password=pass
#server.ssl.key-password=pass

### In order to be user friendly when HTTPS is enabled,
### you can add another HTTP port that will be automatically redirected to HTTPS
### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
#server.http-to-https-redirection.port=8090

### HTTP Example:
###--------------
### server.port=8080

### HTTPS Example:
### --------------
### server.port=8443
### server.ssl.key-store=file:/tmp/mykey.jks
### server.ssl.key-store-password=mypass
### server.ssl.key-password=mypass

### HTTP (Redirected to HTTPS) and HTTPS Example:
### --------------------------------------------
server.port=8443
## Config part for Server certificates
# Can be a classpath parameter instead of file:/
server.ssl.key-store=classpath:/clds/aaf/org.onap.clamp.p12
server.ssl.key-store-password=enc:WWCxchk4WGBNSvuzLq3MLjMs5ObRybJtts5AI0XD1Vc
server.ssl.key-password=enc:WWCxchk4WGBNSvuzLq3MLjMs5ObRybJtts5AI0XD1Vc
server.ssl.key-store-type=PKCS12
server.ssl.key-alias=clamp@clamp.onap.org

# The key file used to decode the key store and trust store password
# If not defined, the key store and trust store password will not be decrypted
clamp.config.keyFile=classpath:/clds/aaf/org.onap.clamp.keyfile

## Config part for Client certificates
server.ssl.client-auth=want
server.ssl.trust-store=classpath:/clds/aaf/truststoreONAPall.jks
server.ssl.trust-store-password=enc:iDnPBBLq_EMidXlMa1FEuBR8TZzYxrCg66vq_XfLHdJ

#server.http-to-https-redirection.port=8080

server.servlet.context-path=/
#Modified engine-rest applicationpath
spring.profiles.active=clamp-default,clamp-aaf-authentication,clamp-sdc-controller,clamp-ssl-config,clamp-policy-controller,legacy-operational-policy
spring.http.converters.preferred-json-mapper=gson

#The max number of active threads in this pool
server.tomcat.max-threads=200
#The minimum number of threads always kept alive
server.tomcat.min-Spare-Threads=25
#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
server.tomcat.max-idle-time=60000

#Servlet context parameters
server.context_parameters.p-name=value #context parameter with p-name as key and value as value.

camel.springboot.consumer-template-cache-size=1000
camel.springboot.producer-template-cache-size=1000
camel.springboot.jmx-enabled=true
camel.defaultthreadpool.poolsize=10
camel.defaultthreadpool.maxpoolsize=20
camel.defaultthreadpool.maxqueuesize=1000
camel.defaultthreadpool.keepaliveTime=60
camel.defaultthreadpool.rejectpolicy=CallerRuns
#camel.springboot.xmlRoutes = false
camel.springboot.xmlRoutes=classpath:/clds/camel/routes/*.xml
camel.springboot.xmlRests=classpath:/clds/camel/rest/*.xml
#camel.springboot.typeConversion = false

#clds datasource connection details
spring.datasource.cldsdb.driverClassName=org.mariadb.jdbc.Driver
spring.datasource.cldsdb.url=jdbc:mariadb:sequential://localhost:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3
spring.datasource.cldsdb.username=clds
spring.datasource.cldsdb.password=4c90a0b48204383f4283448d23e0b885a47237b2a23588e7c4651604f51c1067
spring.datasource.cldsdb.validationQuery=SELECT 1
spring.datasource.cldsdb.validationQueryTimeout=20000
spring.datasource.cldsdb.validationInterval=30000
spring.datasource.cldsdb.testWhileIdle = true
spring.datasource.cldsdb.minIdle = 0
spring.datasource.cldsdb.initialSize=0
# Automatically test whether a connection provided is good or not
spring.datasource.cldsdb.testOnBorrow=true
spring.datasource.cldsdb.ignoreExceptionOnPreLoad=true

spring.jpa.properties.javax.persistence.schema-generation.database.action=none
#spring.jpa.properties.javax.persistence.schema-generation.create-source=metadata
#spring.jpa.properties.javax.persistence.schema-generation.scripts.action=create
#spring.jpa.properties.javax.persistence.schema-generation.scripts.create-target=create.sql
# disable Hibernate DDL generation because the schema will be generated from a sql script
spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
spring.jpa.properties.hibernate.ddl-auto=validate
spring.jpa.properties.hibernate.hbm2ddl.delimiter=;
spring.jpa.properties.hibernate.format_sql=true
spring.jpa.properties.hibernate.use-new-id-generator-mappings=true

# Whether to enable logging of SQL statements.
#spring.jpa.show-sql=true

#Async Executor default Parameters
async.core.pool.size=10
async.max.pool.size=20
async.queue.capacity=500

#For EELF logback file
#clamp.config.logback.path=
clamp.config.logback.filename=logback-default.xml
#The log folder that will be used in logback.xml file
clamp.config.log.path=/var/log/onap/clamp
clamp.config.files.systemProperties=classpath:/system.properties
clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
clamp.config.files.globalProperties=classpath:/clds/templates/globalProperties.json
clamp.config.files.sdcController=classpath:/clds/sdc-controllers-config.json

#
# Configuration Settings for Policy Engine Components
clamp.config.policy.api.url=http4://policy.api.simpledemo.onap.org:6969
clamp.config.policy.api.userName=healthcheck
clamp.config.policy.api.password=zb!XztG34
clamp.config.policy.pap.url=http4://policy.api.simpledemo.onap.org:6969
clamp.config.policy.pap.userName=healthcheck
clamp.config.policy.pap.password=zb!XztG34

#
# Sdc service properties
clamp.config.sdc.csarFolder = /tmp/sdc-controllers

#DCAE Inventory Url Properties
clamp.config.dcae.inventory.url=http4://dcae.api.simpledemo.onap.org:8080
clamp.config.dcae.intentory.retry.interval=10000
clamp.config.dcae.intentory.retry.limit=5

#DCAE Deployment Url Properties
clamp.config.dcae.deployment.url=http4://dcae.api.simpledemo.onap.org:8188
clamp.config.dcae.deployment.userName=test
clamp.config.dcae.deployment.password=test

#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
clamp.config.security.permission.type.cl=org.onap.clamp.clds.cl
clamp.config.security.permission.type.cl.manage=org.onap.clamp.clds.cl.manage
clamp.config.security.permission.type.cl.event=org.onap.clamp.clds.cl.event
clamp.config.security.permission.type.filter.vf=org.onap.clamp.clds.filter.vf
clamp.config.security.permission.type.template=org.onap.clamp.clds.template
clamp.config.security.permission.type.tosca=org.onap.clamp.clds.tosca
#This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
clamp.config.security.permission.instance=dev
clamp.config.security.authentication.class=org.onap.aaf.cadi.principal.X509Principal

#AAF related parameters
clamp.config.cadi.cadiLoglevel=DEBUG
clamp.config.cadi.cadiLatitude=10
clamp.config.cadi.cadiLongitude=10
clamp.config.cadi.aafLocateUrl=https://aaf-locate:8095
clamp.config.cadi.oauthTokenUrl= https://AAF_LOCATE_URL/locate/onap.org.osaaf.aaf.token:2.1/token
clamp.config.cadi.oauthIntrospectUrll=https://AAF_LOCATE_URL/locate/onap.org.osaaf.aaf.introspect:2.1/introspect
clamp.config.cadi.aafEnv=DEV
clamp.config.cadi.aafUrl=https://AAF_LOCATE_URL/onap.org.osaaf.aaf.service:2.1
clamp.config.cadi.cadiX509Issuers=CN=intermediateCA_1, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_7, OU=OSAAF, O=ONAP, C=US:CN=intermediateCA_9, OU=OSAAF, O=ONAP, C=US

## Tosca converter
clamp.config.tosca.converter.templates=classpath:/clds/tosca_updates/templates.json

# Configuration settings for CDS
clamp.config.cds.url=http4://blueprints-processor-http:8080
clamp.config.cds.userName=ccsdkapps
clamp.config.cds.password=ccsdkapps