Addition of Active-Standby Feature
Patch 1: Adds the active-standby feature to drools-pdp.
This feature provides the state control of the
drools-pdp nodes controlling failover with a site
and across sites. Patch 2: Resolve merge conflict in
packages/install/pom.xml and pom.xml. Patch 3: Resolved
comments from Pamela Dragosh and Jorge Hernandez.
Issue-ID: POLICY-156
Change-Id: I922b3d5d8a464006e9675924bcbc7409d68c08d5
Signed-off-by: Kevin McKiou <km097d@att.com>
diff --git a/feature-active-standby-management/src/test/java/org/onap/policy/drools/controller/test/StandbyStateManagementTest.java b/feature-active-standby-management/src/test/java/org/onap/policy/drools/controller/test/StandbyStateManagementTest.java
new file mode 100644
index 0000000..a4a9796
--- /dev/null
+++ b/feature-active-standby-management/src/test/java/org/onap/policy/drools/controller/test/StandbyStateManagementTest.java
@@ -0,0 +1,1551 @@
+/*
+ * ============LICENSE_START=======================================================
+ * feature-active-standby-management
+ * ================================================================================
+ * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+ * ================================================================================
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * ============LICENSE_END=========================================================
+ */
+
+package org.onap.policy.drools.controller.test;
+
+import static org.junit.Assert.assertTrue;
+
+import java.io.File;
+import java.io.FileInputStream;
+import java.util.ArrayList;
+import java.util.Date;
+import java.util.Properties;
+
+import javax.persistence.EntityManager;
+import javax.persistence.EntityManagerFactory;
+import javax.persistence.EntityTransaction;
+import javax.persistence.Persistence;
+
+import org.apache.commons.lang3.time.DateUtils;
+import org.junit.After;
+import org.junit.AfterClass;
+import org.junit.Before;
+import org.junit.BeforeClass;
+import org.junit.Ignore;
+import org.junit.Test;
+import org.slf4j.Logger;
+import org.slf4j.LoggerFactory;
+import org.onap.policy.common.im.AdministrativeStateException;
+import org.onap.policy.common.im.IntegrityMonitor;
+import org.onap.policy.common.im.StandbyStatusException;
+import org.onap.policy.common.im.StateManagement;
+import org.onap.policy.drools.activestandby.ActiveStandbyFeatureAPI;
+import org.onap.policy.drools.activestandby.ActiveStandbyProperties;
+import org.onap.policy.drools.activestandby.DroolsPdp;
+import org.onap.policy.drools.activestandby.DroolsPdpEntity;
+import org.onap.policy.drools.activestandby.DroolsPdpImpl;
+import org.onap.policy.drools.activestandby.DroolsPdpsConnector;
+import org.onap.policy.drools.activestandby.DroolsPdpsElectionHandler;
+import org.onap.policy.drools.activestandby.JpaDroolsPdpsConnector;
+import org.onap.policy.drools.activestandby.PMStandbyStateChangeNotifier;
+import org.onap.policy.drools.core.PolicySessionFeatureAPI;
+import org.onap.policy.drools.statemanagement.StateManagementFeatureAPI;
+
+/*
+ * All JUnits are designed to run in the local development environment
+ * where they have write privileges and can execute time-sensitive
+ * tasks.
+ *
+ * These tests can be run as JUnits, but there is some issue with running them
+ * as part of a "mvn install" build. Also, they take a very long time to run
+ * due to many real time breaks. Consequently, they are marked as @Ignore and
+ * only run from the desktop.
+ */
+
+public class StandbyStateManagementTest {
+ private static final Logger logger = LoggerFactory.getLogger(StandbyStateManagementTest.class);
+ /*
+ * Currently, the DroolsPdpsElectionHandler.DesignationWaiter is invoked every ten seconds, starting
+ * at ten seconds after the minute boundary (e.g. 13:05:10). So, an 80 second sleep should be
+ * sufficient to ensure that we wait for the DesignationWaiter to do its job, before
+ * checking the results.
+ */
+
+ long sleepTime = 80000;
+
+ /*
+ * DroolsPdpsElectionHandler runs every ten seconds, so a 15 second sleep should be
+ * plenty to ensure it has time to re-promote this PDP.
+ */
+
+ long electionWaitSleepTime = 15000;
+
+ /*
+ * Sleep 5 seconds after each test to allow interrupt (shutdown) recovery.
+ */
+
+ long interruptRecoveryTime = 5000;
+
+ private static EntityManagerFactory emfx;
+ private static EntityManagerFactory emfd;
+ private static EntityManager emx;
+ private static EntityManager emd;
+ private static EntityTransaction et;
+
+ private final String configDir = "src/test/resources";
+
+ /*
+ * See the IntegrityMonitor.getJmxUrl() method for the rationale behind this jmx related processing.
+ */
+
+ @BeforeClass
+ public static void setUpClass() throws Exception {
+
+ String userDir = System.getProperty("user.dir");
+ logger.debug("setUpClass: userDir={}", userDir);
+ System.setProperty("com.sun.management.jmxremote.port", "9980");
+ System.setProperty("com.sun.management.jmxremote.authenticate","false");
+
+ }
+
+ @AfterClass
+ public static void tearDownClass() throws Exception {
+ }
+
+ @Before
+ public void setUp() throws Exception {
+ //Create teh data access for xaml db
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ "src/test/resources/feature-state-management.properties")));
+
+ emfx = Persistence.createEntityManagerFactory("junitXacmlPU", stateManagementProperties);
+
+ // Create an entity manager to use the DB
+ emx = emfx.createEntityManager();
+
+ //Create the data access for drools db
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ "src/test/resources/feature-active-standby-management.properties")));
+
+ emfd = Persistence.createEntityManagerFactory("junitDroolsPU", activeStandbyProperties);
+
+ // Create an entity manager to use the DB
+ emd = emfd.createEntityManager();
+ }
+
+ @After
+ public void tearDown() throws Exception {
+
+ }
+
+ public void cleanXacmlDb(){
+ et = emx.getTransaction();
+
+ et.begin();
+ // Make sure we leave the DB clean
+ emx.createQuery("DELETE FROM StateManagementEntity").executeUpdate();
+ emx.createQuery("DELETE FROM ResourceRegistrationEntity").executeUpdate();
+ emx.createQuery("DELETE FROM ForwardProgressEntity").executeUpdate();
+ emx.flush();
+ et.commit();
+ }
+
+ public void cleanDroolsDb(){
+ et = emd.getTransaction();
+
+ et.begin();
+ // Make sure we leave the DB clean
+ emd.createQuery("DELETE FROM DroolsPdpEntity").executeUpdate();
+ emd.flush();
+ et.commit();
+ }
+
+ /*
+ * These JUnit tests must be run one at a time in an eclipse environment
+ * by right-clicking StandbyStateManagementTest and selecting
+ * "Run As" -> "JUnit Test".
+ *
+ * They will run successfully when you run all of them under runAllTests(),
+ * however, you will get all sorts of non-fatal errors in the log and on the
+ * console that result from overlapping threads that are not terminated at the
+ * end of each test. The problem is that the JUnit environment does not terminate
+ * all the test threads between tests. This is true even if you break each JUnit
+ * into a separate file. Consequently, all the tests would have to be refactored
+ * so all test object initializations are coordinated. In other words, you
+ * retrieve the ActiveStandbyFeature instance and other class instances only once
+ * at the beginning of the JUnits and then reuse them throughout the tests.
+ * Initialization of the state of the objects is pretty straight forward as it
+ * just amounts to manipulating the entries in StateManagementEntity and
+ * DroolsPdpEntity tables. However, some thought needs to be given to how to
+ * "pause" the processing in ActiveStandbyFeature class. I think we could "pause"
+ * it by calling globalInit() which will, I think, restart it. So long as it
+ * does not create a new instance, it will force it to go through an initialization
+ * cycle which includes a "pause" at the beginning of proecessing. We just must
+ * be sure it does not create another instance - which may mean we need to add
+ * a factory interface instead of calling the constructor directly.
+ */
+
+
+ //@Ignore
+ @Test
+ public void runAllTests() throws Exception {
+ testColdStandby();
+ testHotStandby1();
+ testHotStandby2();
+ testLocking1();
+ testLocking2();
+ testPMStandbyStateChangeNotifier();
+ testSanitizeDesignatedList();
+ testComputeMostRecentPrimary();
+ testComputeDesignatedPdp();
+ }
+
+ //@Ignore
+ //@Test
+ public void testPMStandbyStateChangeNotifier() throws Exception {
+ logger.debug("\n\ntestPMStandbyStateChangeNotifier: Entering\n\n");
+ cleanXacmlDb();
+
+ logger.debug("testPMStandbyStateChangeNotifier: Reading activeStandbyProperties");
+
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ ActiveStandbyProperties.initProperties(activeStandbyProperties);
+ String thisPdpId = ActiveStandbyProperties.getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testPMStandbyStateChangeNotifier: Getting StateManagementFeatureAPI");
+
+ StateManagementFeatureAPI sm = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ sm = feature;
+ logger.debug("testPMStandbyStateChangeNotifier stateManagementFeature.getResourceName(): {}", sm.getResourceName());
+ break;
+ }
+ if(sm == null){
+ logger.error("testPMStandbyStateChangeNotifier failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testPMStandbyStateChangeNotifier failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ //Create an instance of the Observer
+ PMStandbyStateChangeNotifier pmNotifier = new PMStandbyStateChangeNotifier();
+
+ //Register the PMStandbyStateChangeNotifier Observer
+ sm.addObserver(pmNotifier);
+
+ //At this point the standbystatus = 'null'
+ sm.lock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(StateManagement.NULL_VALUE));
+
+ sm.unlock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(StateManagement.NULL_VALUE));
+
+ //Adding standbystatus=hotstandby
+ sm.demote();
+ System.out.println(pmNotifier.getPreviousStandbyStatus());
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //Now making standbystatus=coldstandby
+ sm.lock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //standbystatus = hotstandby
+ sm.unlock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //standbystatus = providingservice
+ sm.promote();
+ //The previousStandbyStatus is not updated until after the delay activation expires
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //Sleep long enough for the delayActivationTimer to run
+ Thread.sleep(5000);
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(StateManagement.PROVIDING_SERVICE));
+
+ //standbystatus = providingservice
+ sm.promote();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(StateManagement.PROVIDING_SERVICE));
+
+ //standbystatus = coldstandby
+ sm.lock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //standbystatus = hotstandby
+ sm.unlock();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+
+ //standbystatus = hotstandby
+ sm.demote();
+ assertTrue(pmNotifier.getPreviousStandbyStatus().equals(PMStandbyStateChangeNotifier.HOTSTANDBY_OR_COLDSTANDBY));
+ }
+
+ //@Ignore
+ //@Test
+ public void testSanitizeDesignatedList() throws Exception {
+
+ logger.debug("\n\ntestSanitizeDesignatedList: Entering\n\n");
+
+ // Get a DroolsPdpsConnector
+
+ logger.debug("testSanitizeDesignatedList: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testSanitizeDesignatedList: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector droolsPdpsConnector = new JpaDroolsPdpsConnector(emfDrools);
+
+ // Create 4 pdpd all not designated
+
+ DroolsPdp pdp1 = new DroolsPdpImpl("pdp1", false, 4, new Date());
+ DroolsPdp pdp2 = new DroolsPdpImpl("pdp2", false, 4, new Date());
+ DroolsPdp pdp3 = new DroolsPdpImpl("pdp3", false, 4, new Date());
+ DroolsPdp pdp4 = new DroolsPdpImpl("pdp4", false, 4, new Date());
+
+ ArrayList<DroolsPdp> listOfDesignated = new ArrayList<DroolsPdp>();
+ listOfDesignated.add(pdp1);
+ listOfDesignated.add(pdp2);
+ listOfDesignated.add(pdp3);
+ listOfDesignated.add(pdp4);
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI stateManagementFeature = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ stateManagementFeature = feature;
+ logger.debug("testColdStandby stateManagementFeature.getResourceName(): {}", stateManagementFeature.getResourceName());
+ break;
+ }
+ if(stateManagementFeature == null){
+ logger.error("testColdStandby failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testColdStandby failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+
+ DroolsPdpsElectionHandler droolsPdpsElectionHandler = new DroolsPdpsElectionHandler(droolsPdpsConnector, pdp1);
+
+ listOfDesignated = droolsPdpsElectionHandler.santizeDesignatedList(listOfDesignated);
+
+ logger.debug("\n\ntestSanitizeDesignatedList: listOfDesignated.size = {}\n\n",listOfDesignated.size());
+
+ assertTrue(listOfDesignated.size()==4);
+
+ // Now make 2 designated
+
+ pdp1.setDesignated(true);
+ pdp2.setDesignated(true);
+
+ listOfDesignated = droolsPdpsElectionHandler.santizeDesignatedList(listOfDesignated);
+
+ logger.debug("\n\ntestSanitizeDesignatedList: listOfDesignated.size after 2 designated = {}\n\n", listOfDesignated.size());
+
+ assertTrue(listOfDesignated.size()==2);
+ assertTrue(listOfDesignated.contains(pdp1));
+ assertTrue(listOfDesignated.contains(pdp2));
+
+
+ // Now all are designated. But, we have to add back the previously non-designated nodes
+
+ pdp3.setDesignated(true);
+ pdp4.setDesignated(true);
+ listOfDesignated.add(pdp3);
+ listOfDesignated.add(pdp4);
+
+ listOfDesignated = droolsPdpsElectionHandler.santizeDesignatedList(listOfDesignated);
+
+ logger.debug("\n\ntestSanitizeDesignatedList: listOfDesignated.size after all designated = {}\n\n", listOfDesignated.size());
+
+ assertTrue(listOfDesignated.size()==4);
+
+ }
+
+
+ //@Ignore
+ //@Test
+ public void testComputeMostRecentPrimary() throws Exception {
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: Entering\n\n");
+
+ logger.debug("testComputeMostRecentPrimary: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testComputeMostRecentPrimary: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector droolsPdpsConnector = new JpaDroolsPdpsConnector(emfDrools);
+
+
+ // Create 4 pdpd all not designated
+
+
+ long designatedDateMS = new Date().getTime();
+ DroolsPdp pdp1 = new DroolsPdpImpl("pdp1", false, 4, new Date());
+ pdp1.setDesignatedDate(new Date(designatedDateMS - 2));
+
+ DroolsPdp pdp2 = new DroolsPdpImpl("pdp2", false, 4, new Date());
+ //oldest
+ pdp2.setDesignatedDate(new Date(designatedDateMS - 3));
+
+ DroolsPdp pdp3 = new DroolsPdpImpl("pdp3", false, 4, new Date());
+ pdp3.setDesignatedDate(new Date(designatedDateMS - 1));
+
+ DroolsPdp pdp4 = new DroolsPdpImpl("pdp4", false, 4, new Date());
+ //most recent
+ pdp4.setDesignatedDate(new Date(designatedDateMS));
+
+ ArrayList<DroolsPdp> listOfAllPdps = new ArrayList<DroolsPdp>();
+ listOfAllPdps.add(pdp1);
+ listOfAllPdps.add(pdp2);
+ listOfAllPdps.add(pdp3);
+ listOfAllPdps.add(pdp4);
+
+
+ ArrayList<DroolsPdp> listOfDesignated = new ArrayList<DroolsPdp>();
+ listOfDesignated.add(pdp1);
+ listOfDesignated.add(pdp2);
+ listOfDesignated.add(pdp3);
+ listOfDesignated.add(pdp4);
+
+ // Because the way we sanitize the listOfDesignated, it will always contain all hot standby
+ // or all designated members.
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI stateManagementFeature = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ stateManagementFeature = feature;
+ logger.debug("testComputeMostRecentPrimary stateManagementFeature.getResourceName(): {}", stateManagementFeature.getResourceName());
+ break;
+ }
+ if(stateManagementFeature == null){
+ logger.error("testComputeMostRecentPrimary failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testComputeMostRecentPrimary failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ DroolsPdpsElectionHandler droolsPdpsElectionHandler = new DroolsPdpsElectionHandler(droolsPdpsConnector, pdp1);
+
+ DroolsPdp mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+
+ // If all of the pdps are included in the listOfDesignated and none are designated, it will choose
+ // the one which has the most recent designated date.
+
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp4"));
+
+
+ // Now let's designate all of those on the listOfDesignated. It will choose the first one designated
+
+
+ pdp1.setDesignated(true);
+ pdp2.setDesignated(true);
+ pdp3.setDesignated(true);
+ pdp4.setDesignated(true);
+
+ mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: All designated all on list, mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+
+ // If all of the pdps are included in the listOfDesignated and all are designated, it will choose
+ // the one which was designated first
+
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp2"));
+
+
+ // Now we will designate only 2 and put just them in the listOfDesignated. The algorithm will now
+ // look for the most recently designated pdp which is not currently designated.
+
+
+ pdp3.setDesignated(false);
+ pdp4.setDesignated(false);
+
+ listOfDesignated.remove(pdp3);
+ listOfDesignated.remove(pdp4);
+
+ mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp4"));
+
+
+
+ // Now we will have none designated and put two of them in the listOfDesignated. The algorithm will now
+ // look for the most recently designated pdp regardless of whether it is currently marked as designated.
+
+
+ pdp1.setDesignated(false);
+ pdp2.setDesignated(false);
+
+ mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: 2 on list mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp4"));
+
+
+ // If we have only one pdp on in the listOfDesignated, the most recently designated pdp will be chosen, regardless
+ // of its designation status
+
+
+ listOfDesignated.remove(pdp1);
+
+ mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: 1 on list mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp4"));
+
+
+ // Finally, if none are on the listOfDesignated, it will again choose the most recently designated pdp.
+
+
+ listOfDesignated.remove(pdp2);
+
+ mostRecentPrimary = droolsPdpsElectionHandler.computeMostRecentPrimary(listOfAllPdps, listOfDesignated);
+
+ logger.debug("\n\ntestComputeMostRecentPrimary: 0 on list mostRecentPrimary.getPdpId() = {}\n\n", mostRecentPrimary.getPdpId());
+
+ assertTrue(mostRecentPrimary.getPdpId().equals("pdp4"));
+
+ }
+
+ //@Ignore
+ //@Test
+ public void testComputeDesignatedPdp() throws Exception{
+
+ logger.debug("\n\ntestComputeDesignatedPdp: Entering\n\n");
+
+ logger.debug("testComputeDesignatedPdp: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+
+ logger.debug("testComputeDesignatedPdp: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector droolsPdpsConnector = new JpaDroolsPdpsConnector(emfDrools);
+
+
+ // Create 4 pdpd all not designated. Two on site1. Two on site2
+
+
+ long designatedDateMS = new Date().getTime();
+ DroolsPdp pdp1 = new DroolsPdpImpl("pdp1", false, 4, new Date());
+ pdp1.setDesignatedDate(new Date(designatedDateMS - 2));
+ pdp1.setSiteName("site1");
+
+ DroolsPdp pdp2 = new DroolsPdpImpl("pdp2", false, 4, new Date());
+ pdp2.setDesignatedDate(new Date(designatedDateMS - 3));
+ pdp2.setSiteName("site1");
+
+ //oldest
+ DroolsPdp pdp3 = new DroolsPdpImpl("pdp3", false, 4, new Date());
+ pdp3.setDesignatedDate(new Date(designatedDateMS - 4));
+ pdp3.setSiteName("site2");
+
+ DroolsPdp pdp4 = new DroolsPdpImpl("pdp4", false, 4, new Date());
+ //most recent
+ pdp4.setDesignatedDate(new Date(designatedDateMS));
+ pdp4.setSiteName("site2");
+
+ ArrayList<DroolsPdp> listOfAllPdps = new ArrayList<DroolsPdp>();
+ listOfAllPdps.add(pdp1);
+ listOfAllPdps.add(pdp2);
+ listOfAllPdps.add(pdp3);
+ listOfAllPdps.add(pdp4);
+
+
+ ArrayList<DroolsPdp> listOfDesignated = new ArrayList<DroolsPdp>();
+
+
+ // We will first test an empty listOfDesignated. As we know from the previous JUnit,
+ // the pdp with the most designated date will be chosen for mostRecentPrimary
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI stateManagementFeature = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ stateManagementFeature = feature;
+ logger.debug("testComputeDesignatedPdp stateManagementFeature.getResourceName(): {}", stateManagementFeature.getResourceName());
+ break;
+ }
+ if(stateManagementFeature == null){
+ logger.error("testComputeDesignatedPdp failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testComputeDesignatedPdp failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+
+ DroolsPdpsElectionHandler droolsPdpsElectionHandler = new DroolsPdpsElectionHandler(droolsPdpsConnector, pdp1);
+
+ DroolsPdp mostRecentPrimary = pdp4;
+
+ DroolsPdp designatedPdp = droolsPdpsElectionHandler.computeDesignatedPdp(listOfDesignated, mostRecentPrimary);
+
+
+ // The designatedPdp should be null
+
+ assertTrue(designatedPdp==null);
+
+
+ // Now let's try having only one pdp in listOfDesignated, but not in the same site as the most recent primary
+
+ listOfDesignated.add(pdp2);
+
+ designatedPdp = droolsPdpsElectionHandler.computeDesignatedPdp(listOfDesignated, mostRecentPrimary);
+
+
+ // Now the designatedPdp should be the one and only selection in the listOfDesignated
+
+
+ assertTrue(designatedPdp.getPdpId().equals(pdp2.getPdpId()));
+
+
+ // Now let's put 2 pdps in the listOfDesignated, neither in the same site as the mostRecentPrimary
+
+
+ listOfDesignated.add(pdp1);
+
+ designatedPdp = droolsPdpsElectionHandler.computeDesignatedPdp(listOfDesignated, mostRecentPrimary);
+
+
+ // The designatedPdp should now be the one with the lowest lexiographic score - pdp1
+
+
+ assertTrue(designatedPdp.getPdpId().equals(pdp1.getPdpId()));
+
+
+ // Finally, we will have 2 pdps in the listOfDesignated, one in the same site with the mostRecentPrimary
+
+
+ listOfDesignated.remove(pdp1);
+ listOfDesignated.add(pdp3);
+
+ designatedPdp = droolsPdpsElectionHandler.computeDesignatedPdp(listOfDesignated, mostRecentPrimary);
+
+
+ // The designatedPdp should now be the one on the same site as the mostRecentPrimary
+
+
+ assertTrue(designatedPdp.getPdpId().equals(pdp3.getPdpId()));
+ }
+
+ //@Ignore
+ //@Test
+ public void testColdStandby() throws Exception {
+
+ logger.debug("\n\ntestColdStandby: Entering\n\n");
+ cleanXacmlDb();
+ cleanDroolsDb();
+
+ logger.debug("testColdStandby: Reading stateManagementProperties");
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ configDir + "/feature-state-management.properties")));
+
+ logger.debug("testColdStandby: Creating emfXacml");
+ EntityManagerFactory emfXacml = Persistence.createEntityManagerFactory(
+ "junitXacmlPU", stateManagementProperties);
+
+ logger.debug("testColdStandby: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties.getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testColdStandby: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector conn = new JpaDroolsPdpsConnector(emfDrools);
+
+ logger.debug("testColdStandby: Cleaning up tables");
+ conn.deleteAllPdps();
+
+ logger.debug("testColdStandby: Inserting PDP={} as designated", thisPdpId);
+ DroolsPdp pdp = new DroolsPdpImpl(thisPdpId, true, 4, new Date());
+ conn.insertPdp(pdp);
+ DroolsPdpEntity droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testColdStandby: After insertion, DESIGNATED= {} "
+ + "for PDP= {}", droolsPdpEntity.isDesignated(), thisPdpId);
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+
+ /*
+ * When the Standby Status changes (from providingservice) to hotstandby
+ * or coldstandby,the Active/Standby selection algorithm must stand down
+ * if thePDP-D is currently the lead/active node and allow another PDP-D
+ * to take over.
+ *
+ * It must also call lock on all engines in the engine management.
+ */
+
+
+ /*
+ * Yes, this is kludgy, but we have a chicken and egg problem here: we
+ * need a StateManagement object to invoke the
+ * deleteAllStateManagementEntities method.
+ */
+ logger.debug("testColdStandby: Instantiating stateManagement object");
+
+ StateManagement sm = new StateManagement(emfXacml, "dummy");
+ sm.deleteAllStateManagementEntities();
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI smf = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ smf = feature;
+ logger.debug("testColdStandby stateManagementFeature.getResourceName(): {}", smf.getResourceName());
+ break;
+ }
+ if(smf == null){
+ logger.error("testColdStandby failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testColdStandby failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ // Create an ActiveStandbyFeature and initialize it. It will discover the StateManagementFeature
+ // that has been created.
+ ActiveStandbyFeatureAPI activeStandbyFeature = null;
+ for (ActiveStandbyFeatureAPI feature : ActiveStandbyFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ activeStandbyFeature = feature;
+ logger.debug("testColdStandby activeStandbyFeature.getResourceName(): {}", activeStandbyFeature.getResourceName());
+ break;
+ }
+ if(activeStandbyFeature == null){
+ logger.error("testColdStandby failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID:{}", thisPdpId);
+ logger.debug("testColdStandby failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID:{}", thisPdpId);
+ }
+
+ // Artificially putting a PDP into service is really a two step process, 1)
+ // inserting it as designated and 2) promoting it so that its standbyStatus
+ // is providing service.
+
+ logger.debug("testColdStandby: Runner started; Sleeping "
+ + interruptRecoveryTime + "ms before promoting PDP= {}",
+ thisPdpId);
+ Thread.sleep(interruptRecoveryTime);
+
+ logger.debug("testColdStandby: Promoting PDP={}", thisPdpId);
+ smf.promote();
+
+ String standbyStatus = sm.getStandbyStatus(thisPdpId);
+ logger.debug("testColdStandby: Before locking, PDP= {} has standbyStatus= {}",
+ thisPdpId, standbyStatus);
+
+ logger.debug("testColdStandby: Locking smf");
+ smf.lock();
+
+ Thread.sleep(interruptRecoveryTime);
+
+ // Verify that the PDP is no longer designated.
+
+ droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testColdStandby: After lock sm.lock() invoked, "
+ + "DESIGNATED= {} for PDP={}", droolsPdpEntity.isDesignated(), thisPdpId);
+ assertTrue(droolsPdpEntity.isDesignated() == false);
+
+ logger.debug("\n\ntestColdStandby: Exiting\n\n");
+ Thread.sleep(interruptRecoveryTime);
+
+ }
+
+ // Tests hot standby when there is only one PDP.
+
+ //@Ignore
+ //@Test
+ public void testHotStandby1() throws Exception {
+
+ logger.debug("\n\ntestHotStandby1: Entering\n\n");
+ cleanXacmlDb();
+ cleanDroolsDb();
+
+ logger.debug("testHotStandby1: Reading stateManagementProperties");
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ configDir + "/feature-state-management.properties")));
+
+ logger.debug("testHotStandby1: Creating emfXacml");
+ EntityManagerFactory emfXacml = Persistence.createEntityManagerFactory(
+ "junitXacmlPU", stateManagementProperties);
+
+ logger.debug("testHotStandby1: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testHotStandby1: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector conn = new JpaDroolsPdpsConnector(emfDrools);
+
+ logger.debug("testHotStandby1: Cleaning up tables");
+ conn.deleteAllPdps();
+
+ /*
+ * Insert this PDP as not designated. Initial standby state will be
+ * either null or cold standby. Demoting should transit state to
+ * hot standby.
+ */
+
+ logger.debug("testHotStandby1: Inserting PDP={} as not designated", thisPdpId);
+ Date yesterday = DateUtils.addDays(new Date(), -1);
+ DroolsPdpImpl pdp = new DroolsPdpImpl(thisPdpId, false, 4, yesterday);
+ conn.insertPdp(pdp);
+ DroolsPdpEntity droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testHotStandby1: After insertion, PDP={} has DESIGNATED={}",
+ thisPdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == false);
+
+ logger.debug("testHotStandby1: Instantiating stateManagement object");
+ StateManagement sm = new StateManagement(emfXacml, "dummy");
+ sm.deleteAllStateManagementEntities();
+
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI smf = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ smf = feature;
+ logger.debug("testHotStandby1 stateManagementFeature.getResourceName(): {}", smf.getResourceName());
+ break;
+ }
+ if(smf == null){
+ logger.error("testHotStandby1 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testHotStandby1 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ // Create an ActiveStandbyFeature and initialize it. It will discover the StateManagementFeature
+ // that has been created.
+ ActiveStandbyFeatureAPI activeStandbyFeature = null;
+ for (ActiveStandbyFeatureAPI feature : ActiveStandbyFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ activeStandbyFeature = feature;
+ logger.debug("testHotStandby1 activeStandbyFeature.getResourceName(): {}", activeStandbyFeature.getResourceName());
+ break;
+ }
+ if(activeStandbyFeature == null){
+ logger.error("testHotStandby1 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testHotStandby1 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+
+ logger.debug("testHotStandby1: Demoting PDP={}", thisPdpId);
+ // demoting should cause state to transit to hotstandby
+ smf.demote();
+
+
+ logger.debug("testHotStandby1: Sleeping {} ms, to allow JpaDroolsPdpsConnector "
+ + "time to check droolspdpentity table", sleepTime);
+ Thread.sleep(sleepTime);
+
+
+ // Verify that this formerly un-designated PDP in HOT_STANDBY is now designated and providing service.
+
+ droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testHotStandby1: After sm.demote() invoked, DESIGNATED= {} "
+ + "for PDP= {}", droolsPdpEntity.isDesignated(), thisPdpId);
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+ String standbyStatus = smf.getStandbyStatus(thisPdpId);
+ logger.debug("testHotStandby1: After demotion, PDP= {} "
+ + "has standbyStatus= {}", thisPdpId, standbyStatus);
+ assertTrue(standbyStatus != null && standbyStatus.equals(StateManagement.PROVIDING_SERVICE));
+
+ logger.debug("testHotStandby1: Stopping policyManagementRunner");
+ //policyManagementRunner.stopRunner();
+
+ logger.debug("\n\ntestHotStandby1: Exiting\n\n");
+ Thread.sleep(interruptRecoveryTime);
+
+ }
+
+ /*
+ * Tests hot standby when two PDPs are involved.
+ */
+
+ //@Ignore
+ //@Test
+ public void testHotStandby2() throws Exception {
+
+ logger.info("\n\ntestHotStandby2: Entering\n\n");
+ cleanXacmlDb();
+ cleanDroolsDb();
+
+ logger.info("testHotStandby2: Reading stateManagementProperties");
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ configDir + "/feature-state-management.properties")));
+
+ logger.info("testHotStandby2: Creating emfXacml");
+ EntityManagerFactory emfXacml = Persistence.createEntityManagerFactory(
+ "junitXacmlPU", stateManagementProperties);
+
+ logger.info("testHotStandby2: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.info("testHotStandby2: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector conn = new JpaDroolsPdpsConnector(emfDrools);
+
+ logger.info("testHotStandby2: Cleaning up tables");
+ conn.deleteAllPdps();
+
+
+ // Insert a PDP that's designated but not current.
+
+ String activePdpId = "pdp2";
+ logger.info("testHotStandby2: Inserting PDP={} as stale, designated PDP", activePdpId);
+ Date yesterday = DateUtils.addDays(new Date(), -1);
+ DroolsPdp pdp = new DroolsPdpImpl(activePdpId, true, 4, yesterday);
+ conn.insertPdp(pdp);
+ DroolsPdpEntity droolsPdpEntity = conn.getPdp(activePdpId);
+ logger.info("testHotStandby2: After insertion, PDP= {}, which is "
+ + "not current, has DESIGNATED= {}", activePdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+
+ /*
+ * Promote the designated PDP.
+ *
+ * We have a chicken and egg problem here: we need a StateManagement
+ * object to invoke the deleteAllStateManagementEntities method.
+ */
+
+
+ logger.info("testHotStandby2: Promoting PDP={}", activePdpId);
+ StateManagement sm = new StateManagement(emfXacml, "dummy");
+ sm.deleteAllStateManagementEntities();
+
+
+ sm = new StateManagement(emfXacml, activePdpId);//pdp2
+
+ // Artificially putting a PDP into service is really a two step process, 1)
+ // inserting it as designated and 2) promoting it so that its standbyStatus
+ // is providing service.
+
+ /*
+ * Insert this PDP as not designated. Initial standby state will be
+ * either null or cold standby. Demoting should transit state to
+ * hot standby.
+ */
+
+
+ logger.info("testHotStandby2: Inserting PDP= {} as not designated", thisPdpId);
+ pdp = new DroolsPdpImpl(thisPdpId, false, 4, yesterday);
+ conn.insertPdp(pdp);
+ droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.info("testHotStandby2: After insertion, PDP={} "
+ + "has DESIGNATED= {}", thisPdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == false);
+
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI sm2 = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ sm2 = feature;
+ logger.debug("testHotStandby2 stateManagementFeature.getResourceName(): {}", sm2.getResourceName());
+ break;
+ }
+ if(sm2 == null){
+ logger.error("testHotStandby2 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testHotStandby2 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ // Create an ActiveStandbyFeature and initialize it. It will discover the StateManagementFeature
+ // that has been created.
+ ActiveStandbyFeatureAPI activeStandbyFeature = null;
+ for (ActiveStandbyFeatureAPI feature : ActiveStandbyFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ activeStandbyFeature = feature;
+ logger.debug("testHotStandby2 activeStandbyFeature.getResourceName(): {}", activeStandbyFeature.getResourceName());
+ break;
+ }
+ if(activeStandbyFeature == null){
+ logger.error("testHotStandby2 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testHotStandby2 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ logger.info("testHotStandby2: Runner started; Sleeping {} "
+ + "ms before promoting/demoting", interruptRecoveryTime);
+ Thread.sleep(interruptRecoveryTime);
+
+ logger.info("testHotStandby2: Runner started; promoting PDP={}", activePdpId);
+ //At this point, the newly created pdp will have set the state to disabled/failed/cold standby
+ //because it is stale. So, it cannot be promoted. We need to call sm.enableNotFailed() so we
+ //can promote it and demote the other pdp - else the other pdp will just spring back to providingservice
+ sm.enableNotFailed();//pdp2
+ sm.promote();
+ String standbyStatus = sm.getStandbyStatus(activePdpId);
+ logger.info("testHotStandby2: After promoting, PDP= {} has standbyStatus= {}", activePdpId, standbyStatus);
+
+ // demoting PDP should ensure that state transits to hotstandby
+ logger.info("testHotStandby2: Runner started; demoting PDP= {}", thisPdpId);
+ sm2.demote();//pdp1
+ standbyStatus = sm.getStandbyStatus(thisPdpId);
+ logger.info("testHotStandby2: After demoting, PDP={} has standbyStatus= {}",thisPdpId , standbyStatus);
+
+ logger.info("testHotStandby2: Sleeping {} ms, to allow JpaDroolsPdpsConnector "
+ + "time to check droolspdpentity table", sleepTime);
+ Thread.sleep(sleepTime);
+
+ /*
+ * Verify that this PDP, demoted to HOT_STANDBY, is now
+ * re-designated and providing service.
+ */
+
+ droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.info("testHotStandby2: After demoting PDP={}"
+ + ", DESIGNATED= {}"
+ + " for PDP= {}", activePdpId, droolsPdpEntity.isDesignated(), thisPdpId);
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+ standbyStatus = sm2.getStandbyStatus(thisPdpId);
+ logger.info("testHotStandby2: After demoting PDP={}"
+ + ", PDP={} has standbyStatus= {}",
+ activePdpId, thisPdpId, standbyStatus);
+ assertTrue(standbyStatus != null
+ && standbyStatus.equals(StateManagement.PROVIDING_SERVICE));
+
+ logger.info("testHotStandby2: Stopping policyManagementRunner");
+ //policyManagementRunner.stopRunner();
+
+ logger.info("\n\ntestHotStandby2: Exiting\n\n");
+ Thread.sleep(interruptRecoveryTime);
+
+ }
+
+ /*
+ * 1) Inserts and designates this PDP, then verifies that startTransaction
+ * is successful.
+ *
+ * 2) Demotes PDP, and verifies that because there is only one PDP, it will
+ * be immediately re-promoted, thus allowing startTransaction to be
+ * successful.
+ *
+ * 3) Locks PDP and verifies that startTransaction results in
+ * AdministrativeStateException.
+ *
+ * 4) Unlocks PDP and verifies that startTransaction results in
+ * StandbyStatusException.
+ *
+ * 5) Promotes PDP and verifies that startTransaction is once again
+ * successful.
+ */
+
+ //@Ignore
+ //@Test
+ public void testLocking1() throws Exception {
+ logger.debug("testLocking1: Entry");
+ cleanXacmlDb();
+ cleanDroolsDb();
+
+ logger.debug("testLocking1: Reading stateManagementProperties");
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ configDir + "/feature-state-management.properties")));
+
+ logger.debug("testLocking1: Creating emfXacml");
+ EntityManagerFactory emfXacml = Persistence.createEntityManagerFactory(
+ "junitXacmlPU", stateManagementProperties);
+
+ logger.debug("testLocking1: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testLocking1: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector conn = new JpaDroolsPdpsConnector(emfDrools);
+
+ logger.debug("testLocking1: Cleaning up tables");
+ conn.deleteAllPdps();
+
+ /*
+ * Insert this PDP as designated. Initial standby state will be
+ * either null or cold standby.
+ */
+
+ logger.debug("testLocking1: Inserting PDP= {} as designated", thisPdpId);
+ DroolsPdpImpl pdp = new DroolsPdpImpl(thisPdpId, true, 4, new Date());
+ conn.insertPdp(pdp);
+ DroolsPdpEntity droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testLocking1: After insertion, PDP= {} has DESIGNATED= {}",
+ thisPdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+
+ logger.debug("testLocking1: Instantiating stateManagement object");
+ StateManagement smDummy = new StateManagement(emfXacml, "dummy");
+ smDummy.deleteAllStateManagementEntities();
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI sm = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ sm = feature;
+ logger.debug("testLocking1 stateManagementFeature.getResourceName(): {}", sm.getResourceName());
+ break;
+ }
+ if(sm == null){
+ logger.error("testLocking1 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testLocking1 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ // Create an ActiveStandbyFeature and initialize it. It will discover the StateManagementFeature
+ // that has been created.
+ ActiveStandbyFeatureAPI activeStandbyFeature = null;
+ for (ActiveStandbyFeatureAPI feature : ActiveStandbyFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ activeStandbyFeature = feature;
+ logger.debug("testLocking1 activeStandbyFeature.getResourceName(): {}", activeStandbyFeature.getResourceName());
+ break;
+ }
+ if(activeStandbyFeature == null){
+ logger.error("testLocking1 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testLocking1 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ logger.debug("testLocking1: Runner started; Sleeping "
+ + interruptRecoveryTime + "ms before promoting PDP={}",
+ thisPdpId);
+ Thread.sleep(interruptRecoveryTime);
+
+ logger.debug("testLocking1: Promoting PDP={}", thisPdpId);
+ sm.promote();
+
+ logger.debug("testLocking1: Sleeping {} ms, to allow time for "
+ + "policy-management.Main class to come up, designated= {}",
+ sleepTime, conn.getPdp(thisPdpId).isDesignated());
+ Thread.sleep(sleepTime);
+
+ logger.debug("testLocking1: Waking up and invoking startTransaction on active PDP={}"
+ + ", designated= {}",thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+
+
+ IntegrityMonitor droolsPdpIntegrityMonitor = IntegrityMonitor.getInstance();
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ droolsPdpIntegrityMonitor.endTransaction();
+ logger.debug("testLocking1: As expected, transaction successful");
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking1: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking1: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking1: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ }
+
+ // demoting should cause state to transit to hotstandby, followed by re-promotion,
+ // since there is only one PDP.
+ logger.debug("testLocking1: demoting PDP={}", thisPdpId);
+ sm.demote();
+
+ logger.debug("testLocking1: sleeping" + electionWaitSleepTime
+ + " to allow election handler to re-promote PDP={}", thisPdpId);
+ Thread.sleep(electionWaitSleepTime);
+
+ logger.debug("testLocking1: Invoking startTransaction on re-promoted PDP={}"
+ + ", designated={}", thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ droolsPdpIntegrityMonitor.endTransaction();
+ logger.debug("testLocking1: As expected, transaction successful");
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking1: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking1: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking1: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ }
+
+ // locking should cause state to transit to cold standby
+ logger.debug("testLocking1: locking PDP={}", thisPdpId);
+ sm.lock();
+
+ // Just to avoid any race conditions, sleep a little after locking
+ logger.debug("testLocking1: Sleeping a few millis after locking, to avoid race condition");
+ Thread.sleep(100);
+
+ logger.debug("testLocking1: Invoking startTransaction on locked PDP= {}"
+ + ", designated= {}",thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ logger.error("testLocking1: startTransaction unexpectedly successful");
+ assertTrue(false);
+ } catch (AdministrativeStateException e) {
+ logger.debug("testLocking1: As expected, caught AdministrativeStateException, ", e);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking1: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking1: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ } finally {
+ droolsPdpIntegrityMonitor.endTransaction();
+ }
+
+ // unlocking should cause state to transit to hot standby and then providing service
+ logger.debug("testLocking1: unlocking PDP={}", thisPdpId);
+ sm.unlock();
+
+ // Just to avoid any race conditions, sleep a little after locking
+ logger.debug("testLocking1: Sleeping a few millis after unlocking, to avoid race condition");
+ Thread.sleep(electionWaitSleepTime);
+
+ logger.debug("testLocking1: Invoking startTransaction on unlocked PDP="
+ + thisPdpId
+ + ", designated="
+ + conn.getPdp(thisPdpId).isDesignated());
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ logger.error("testLocking1: startTransaction successful as expected");
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking1: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.debug("testLocking1: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking1: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ } finally {
+ droolsPdpIntegrityMonitor.endTransaction();
+ }
+
+ // demoting should cause state to transit to hot standby
+ logger.debug("testLocking1: demoting PDP={}", thisPdpId);
+ sm.demote();
+
+ // Just to avoid any race conditions, sleep a little after promoting
+ logger.debug("testLocking1: Sleeping a few millis after demoting, to avoid race condition");
+ Thread.sleep(100);
+
+ logger.debug("testLocking1: Invoking startTransaction on demoted PDP={}"
+ + ", designated={}", thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ droolsPdpIntegrityMonitor.endTransaction();
+ logger.debug("testLocking1: Unexpectedly, transaction successful");
+ assertTrue(false);
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking1: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking1: As expected caught StandbyStatusException, ", e);
+ } catch (Exception e) {
+ logger.error("testLocking1: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ }
+
+ logger.debug("\n\ntestLocking1: Exiting\n\n");
+ Thread.sleep(interruptRecoveryTime);
+
+ }
+
+
+ /*
+ * 1) Inserts and designates this PDP, then verifies that startTransaction
+ * is successful.
+ *
+ * 2) Inserts another PDP in hotstandby.
+ *
+ * 3) Demotes this PDP, and verifies 1) that other PDP is not promoted (because one
+ * PDP cannot promote another PDP) and 2) that this PDP is re-promoted.
+ */
+
+ //@Ignore
+ //@Test
+ public void testLocking2() throws Exception {
+
+ logger.debug("\n\ntestLocking2: Entering\n\n");
+ cleanXacmlDb();
+ cleanDroolsDb();
+
+ logger.debug("testLocking2: Reading stateManagementProperties");
+ Properties stateManagementProperties = new Properties();
+ stateManagementProperties.load(new FileInputStream(new File(
+ configDir + "/feature-state-management.properties")));
+
+ logger.debug("testLocking2: Creating emfXacml");
+ EntityManagerFactory emfXacml = Persistence.createEntityManagerFactory(
+ "junitXacmlPU", stateManagementProperties);
+
+ logger.debug("testLocking2: Reading activeStandbyProperties");
+ Properties activeStandbyProperties = new Properties();
+ activeStandbyProperties.load(new FileInputStream(new File(
+ configDir + "/feature-active-standby-management.properties")));
+ String thisPdpId = activeStandbyProperties
+ .getProperty(ActiveStandbyProperties.NODE_NAME);
+
+ logger.debug("testLocking2: Creating emfDrools");
+ EntityManagerFactory emfDrools = Persistence.createEntityManagerFactory(
+ "junitDroolsPU", activeStandbyProperties);
+
+ DroolsPdpsConnector conn = new JpaDroolsPdpsConnector(emfDrools);
+
+ logger.debug("testLocking2: Cleaning up tables");
+ conn.deleteAllPdps();
+
+ /*
+ * Insert this PDP as designated. Initial standby state will be
+ * either null or cold standby. Demoting should transit state to
+ * hot standby.
+ */
+
+ logger.debug("testLocking2: Inserting PDP= {} as designated", thisPdpId);
+ DroolsPdpImpl pdp = new DroolsPdpImpl(thisPdpId, true, 3, new Date());
+ conn.insertPdp(pdp);
+ DroolsPdpEntity droolsPdpEntity = conn.getPdp(thisPdpId);
+ logger.debug("testLocking2: After insertion, PDP= {} has DESIGNATED= {}",
+ thisPdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == true);
+
+ logger.debug("testLocking2: Instantiating stateManagement object and promoting PDP={}", thisPdpId);
+ StateManagement smDummy = new StateManagement(emfXacml, "dummy");
+ smDummy.deleteAllStateManagementEntities();
+
+ // Now we want to create a StateManagementFeature and initialize it. It will be
+ // discovered by the ActiveStandbyFeature when the election handler initializes.
+
+ StateManagementFeatureAPI sm = null;
+ for (StateManagementFeatureAPI feature : StateManagementFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ sm = feature;
+ logger.debug("testLocking2 stateManagementFeature.getResourceName(): {}", sm.getResourceName());
+ break;
+ }
+ if(sm == null){
+ logger.error("testLocking2 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testLocking2 failed to initialize. "
+ + "Unable to get instance of StateManagementFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ // Create an ActiveStandbyFeature and initialize it. It will discover the StateManagementFeature
+ // that has been created.
+ ActiveStandbyFeatureAPI activeStandbyFeature = null;
+ for (ActiveStandbyFeatureAPI feature : ActiveStandbyFeatureAPI.impl.getList())
+ {
+ ((PolicySessionFeatureAPI) feature).globalInit(null, configDir);
+ activeStandbyFeature = feature;
+ logger.debug("testLocking2 activeStandbyFeature.getResourceName(): {}", activeStandbyFeature.getResourceName());
+ break;
+ }
+ if(activeStandbyFeature == null){
+ logger.error("testLocking2 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ logger.debug("testLocking2 failed to initialize. "
+ + "Unable to get instance of ActiveStandbyFeatureAPI "
+ + "with resourceID: {}", thisPdpId);
+ }
+
+ /*
+ * Insert another PDP as not designated. Initial standby state will be
+ * either null or cold standby. Demoting should transit state to
+ * hot standby.
+ */
+
+ String standbyPdpId = "pdp2";
+ logger.debug("testLocking2: Inserting PDP= {} as not designated", standbyPdpId);
+ Date yesterday = DateUtils.addDays(new Date(), -1);
+ pdp = new DroolsPdpImpl(standbyPdpId, false, 4, yesterday);
+ conn.insertPdp(pdp);
+ droolsPdpEntity = conn.getPdp(standbyPdpId);
+ logger.debug("testLocking2: After insertion, PDP={} has DESIGNATED= {}",
+ standbyPdpId, droolsPdpEntity.isDesignated());
+ assertTrue(droolsPdpEntity.isDesignated() == false);
+
+ logger.debug("testLocking2: Demoting PDP= {}", standbyPdpId);
+ StateManagement sm2 = new StateManagement(emfXacml, standbyPdpId);
+
+ logger.debug("testLocking2: Runner started; Sleeping {} ms "
+ + "before promoting/demoting", interruptRecoveryTime);
+ Thread.sleep(interruptRecoveryTime);
+
+ logger.debug("testLocking2: Promoting PDP= {}", thisPdpId);
+ sm.promote();
+
+ // demoting PDP should ensure that state transits to hotstandby
+ logger.debug("testLocking2: Demoting PDP={}", standbyPdpId);
+ sm2.demote();
+
+ logger.debug("testLocking2: Sleeping {} ms, to allow time for to come up", sleepTime);
+ Thread.sleep(sleepTime);
+
+ logger.debug("testLocking2: Waking up and invoking startTransaction on active PDP={}"
+ + ", designated= {}", thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+
+ IntegrityMonitor droolsPdpIntegrityMonitor = IntegrityMonitor.getInstance();
+
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ droolsPdpIntegrityMonitor.endTransaction();
+ logger.debug("testLocking2: As expected, transaction successful");
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking2: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking2: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking2: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ }
+
+ // demoting should cause state to transit to hotstandby followed by re-promotion.
+ logger.debug("testLocking2: demoting PDP={}", thisPdpId);
+ sm.demote();
+
+ logger.debug("testLocking2: sleeping {}"
+ + " to allow election handler to re-promote PDP={}", electionWaitSleepTime, thisPdpId);
+ Thread.sleep(electionWaitSleepTime);
+
+ logger.debug("testLocking2: Waking up and invoking startTransaction "
+ + "on re-promoted PDP= {}, designated= {}",
+ thisPdpId, conn.getPdp(thisPdpId).isDesignated());
+ try {
+ droolsPdpIntegrityMonitor.startTransaction();
+ droolsPdpIntegrityMonitor.endTransaction();
+ logger.debug("testLocking2: As expected, transaction successful");
+ } catch (AdministrativeStateException e) {
+ logger.error("testLocking2: Unexpectedly caught AdministrativeStateException, ", e);
+ assertTrue(false);
+ } catch (StandbyStatusException e) {
+ logger.error("testLocking2: Unexpectedly caught StandbyStatusException, ", e);
+ assertTrue(false);
+ } catch (Exception e) {
+ logger.error("testLocking2: Unexpectedly caught Exception, ", e);
+ assertTrue(false);
+ }
+
+ logger.debug("testLocking2: Verifying designated status for PDP= {}", standbyPdpId);
+ boolean standbyPdpDesignated = conn.getPdp(standbyPdpId).isDesignated();
+ assertTrue(standbyPdpDesignated == false);
+
+ logger.debug("\n\ntestLocking2: Exiting\n\n");
+ Thread.sleep(interruptRecoveryTime);
+ }
+}
diff --git a/feature-active-standby-management/src/test/resources/META-INF/persistence.xml b/feature-active-standby-management/src/test/resources/META-INF/persistence.xml
new file mode 100644
index 0000000..ff6ac58
--- /dev/null
+++ b/feature-active-standby-management/src/test/resources/META-INF/persistence.xml
@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+ ============LICENSE_START=======================================================
+ feature-active-standby-management
+ ================================================================================
+ Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ ============LICENSE_END=========================================================
+ -->
+
+<persistence version="2.1"
+ xmlns="http://xmlns.jcp.org/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+ xsi:schemaLocation="http://xmlns.jcp.org/xml/ns/persistence http://xmlns.jcp.org/xml/ns/persistence/persistence_2_1.xsd">
+ <persistence-unit name="junitDroolsPU" transaction-type="RESOURCE_LOCAL">
+ <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
+ <class>org.onap.policy.drools.activestandby.DroolsPdpEntity</class>
+ <properties>
+ <property name="javax.persistence.schema-generation.database.action" value="drop-and-create"/>
+ <property name="javax.persistence.schema-generation.scripts.action" value="drop-and-create"/>
+ <property name="javax.persistence.schema-generation.scripts.create-target" value="./sql/generatedCreateDrools.ddl"/>
+ <property name="javax.persistence.schema-generation.scripts.drop-target" value="./sql/generatedDropDrools.ddl"/>
+ </properties>
+ </persistence-unit>
+ <persistence-unit name="junitXacmlPU" transaction-type="RESOURCE_LOCAL">
+ <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
+ <class>org.onap.policy.common.im.jpa.StateManagementEntity</class>
+ <class>org.onap.policy.common.im.jpa.ForwardProgressEntity</class>
+ <class>org.onap.policy.common.im.jpa.ResourceRegistrationEntity</class>
+ <properties>
+ <property name="javax.persistence.schema-generation.database.action" value="drop-and-create"/>
+ <property name="javax.persistence.schema-generation.scripts.action" value="drop-and-create"/>
+ <property name="javax.persistence.schema-generation.scripts.create-target" value="./sql/generatedCreateXacml.ddl"/>
+ <property name="javax.persistence.schema-generation.scripts.drop-target" value="./sql/generatedDropXacml.ddl"/>
+ </properties>
+ </persistence-unit>
+</persistence>
diff --git a/feature-active-standby-management/src/test/resources/feature-active-standby-management.properties b/feature-active-standby-management/src/test/resources/feature-active-standby-management.properties
new file mode 100644
index 0000000..bbae5d9
--- /dev/null
+++ b/feature-active-standby-management/src/test/resources/feature-active-standby-management.properties
@@ -0,0 +1,39 @@
+###
+# ============LICENSE_START=======================================================
+# feature-active-standby-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# DB properties
+javax.persistence.jdbc.driver = org.h2.Driver
+javax.persistence.jdbc.url = jdbc:h2:file:./sql/activestandbymanagement
+javax.persistence.jdbc.user = sa
+javax.persistence.jdbc.password =
+
+# Must be unique across the system
+resource.name=pdp1
+# Name of the site in which this node is hosted
+site_name=pdp_1
+
+# Needed by DroolsPdpsElectionHandler
+pdp.checkInterval=1500
+pdp.updateInterval=1000
+#pdp.timeout=3000
+# Need long timeout, because testTransaction is only run every 10 seconds.
+pdp.timeout=15000
+#how long do we wait for the pdp table to populate on initial startup
+pdp.initialWait=20000
\ No newline at end of file
diff --git a/feature-active-standby-management/src/test/resources/feature-state-management.properties b/feature-active-standby-management/src/test/resources/feature-state-management.properties
new file mode 100644
index 0000000..3d767a1
--- /dev/null
+++ b/feature-active-standby-management/src/test/resources/feature-state-management.properties
@@ -0,0 +1,74 @@
+###
+# ============LICENSE_START=======================================================
+# feature-active-standby-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# DB properties
+javax.persistence.jdbc.driver = org.h2.Driver
+javax.persistence.jdbc.url = jdbc:h2:file:./sql/statemanagement
+javax.persistence.jdbc.user = sa
+javax.persistence.jdbc.password =
+
+# DroolsPDPIntegrityMonitor Properties
+hostPort = 0.0.0.0:57692
+
+#IntegrityMonitor Properties
+
+# Must be unique across the system
+resource.name=pdp1
+# Name of the site in which this node is hosted
+site_name = pdp_1
+# Forward Progress Monitor update interval seconds
+fp_monitor_interval = 30
+# Failed counter threshold before failover
+failed_counter_threshold = 3
+# Interval between test transactions when no traffic seconds
+test_trans_interval = 10
+# Interval between writes of the FPC to the DB seconds
+write_fpc_interval = 5
+# Node type Note: Make sure you don't leave any trailing spaces, or you'll get an 'invalid node type' error!
+node_type = pdp_drools
+# Dependency groups are groups of resources upon which a node operational state is dependent upon.
+# Each group is a comma-separated list of resource names and groups are separated by a semicolon. For example:
+# dependency_groups=site_1.astra_1,site_1.astra_2;site_1.brms_1,site_1.brms_2;site_1.logparser_1;site_1.pypdp_1
+dependency_groups=
+# When set to true, dependent health checks are performed by using JMX to invoke test() on the dependent.
+# The default false is to use state checks for health.
+test_via_jmx=true
+# This is the max number of seconds beyond which a non incrementing FPC is considered a failure
+max_fpc_update_interval=120
+# Run the state audit every 60 seconds (60000 ms). The state audit finds stale DB entries in the
+# forwardprogressentity table and marks the node as disabled/failed in the statemanagemententity
+# table. NOTE! It will only run on nodes that have a standbystatus = providingservice.
+# A value of <= 0 will turn off the state audit.
+state_audit_interval_ms=60000
+# The refresh state audit is run every (default) 10 minutes (600000 ms) to clean up any state corruption in the
+# DB statemanagemententity table. It only refreshes the DB state entry for the local node. That is, it does not
+# refresh the state of any other nodes. A value <= 0 will turn the audit off. Any other value will override
+# the default of 600000 ms.
+refresh_state_audit_interval_ms=600000
+
+
+# Repository audit properties
+# Flag to control the execution of the subsystemTest for the Nexus Maven repository
+repository.audit.is.active=false
+repository.audit.ignore.errors=true
+
+# DB Audit Properties
+# Flag to control the execution of the subsystemTest for the Database
+db.audit.is.active=false
diff --git a/feature-active-standby-management/src/test/resources/logback-test.xml b/feature-active-standby-management/src/test/resources/logback-test.xml
new file mode 100644
index 0000000..a36bdb1
--- /dev/null
+++ b/feature-active-standby-management/src/test/resources/logback-test.xml
@@ -0,0 +1,46 @@
+<!--
+ ============LICENSE_START=======================================================
+ feature-state-management
+ ================================================================================
+ Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+ ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+ ============LICENSE_END=========================================================
+ -->
+
+<!-- Controls the output of logs for JUnit tests -->
+
+<configuration>
+
+ <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+ <encoder class="ch.qos.logback.classic.encoder.PatternLayoutEncoder">
+ <Pattern>
+ %d{yyyy-MM-dd HH:mm:ss.SSS} [%thread] %-5level %logger{36}.%M\(%line\) - %msg%n
+ </Pattern>
+ </encoder>
+ </appender>
+ <appender name="FILE" class="ch.qos.logback.core.FileAppender">
+ <file>logs/debug.log</file>
+ <encoder>
+ <Pattern>
+ %d{yyyy-MM-dd HH:mm:ss.SSS} [%thread] %-5level %logger{36}.%M\(%line\) - %msg%n
+ </Pattern>
+ </encoder>
+ </appender>
+
+ <root level="debug">
+ <appender-ref ref="STDOUT" />
+ <appender-ref ref="FILE" />
+ </root>
+
+</configuration>