Initial OpenECOMP SDC commit
Change-Id: I0924d5a6ae9cdc161ae17c68d3689a30d10f407b
Signed-off-by: Michael Lando <ml636r@att.com>
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb
new file mode 100644
index 0000000..9313aa8
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb
@@ -0,0 +1,49 @@
+cluster_name = ''
+cluster_name = node['cassandra'][:cluster_name]+node.chef_environment
+
+cas_ips=''
+cas_ips=node['Nodes'][:CS]
+
+interface = node['interfaces']['application']
+application_host = ''
+node['network']['interfaces'][interface][:addresses].each do | addr , details |
+ if details['family'] == ('inet')
+ application_host = addr
+ end
+end
+
+
+template "cassandra-yaml-config" do
+ path "/etc/cassandra/cassandra.yaml"
+ source "cassandra.yaml.erb"
+ owner "cassandra"
+ group "cassandra"
+ mode "0755"
+ variables ({
+ :cassandra_cluster => cluster_name,
+ :cassandra_data_dir => node['cassandra'][:data_dir],
+ :cassandra_commitlog_dir => node['cassandra'][:commitlog_dir],
+ :cassandra_cache_dir => node['cassandra'][:cache_dir],
+ :seeds_address => cas_ips,
+ :listen_address => application_host,
+ :broadcast_address => application_host,
+ :broadcast_rpc_address => application_host,
+ :rpc_address => "0.0.0.0",
+ :num_tokens => node['cassandra'][:num_tokens],
+ :internode_encryption => "none",
+ :cassandra_truststore_dir => "/etc/cassandra/cs_trust"
+ })
+end
+
+rackNum=1
+template "cassandra-rackdc.properties" do
+ path "/etc/cassandra/cassandra-rackdc.properties"
+ source "cassandra-rackdc.properties.erb"
+ owner "cassandra"
+ group "cassandra"
+ mode "0755"
+ variables ({
+ :dc => "DC-"+node.chef_environment,
+ :rack => "Rack"+"#{rackNum}-"+node.chef_environment
+ })
+end
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb
new file mode 100644
index 0000000..627bd6f
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb
@@ -0,0 +1,8 @@
+template "/tmp/create_cassandra_user.sh" do
+ source "create_cassandra_user.sh.erb"
+ mode 0755
+ variables({
+ :cassandra_ip => "HOSTIP"
+ })
+end
+
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb
new file mode 100644
index 0000000..92a81eb
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb
@@ -0,0 +1,8 @@
+template "/tmp/create_dox_keyspace.sh" do
+ source "create_dox_keyspace.sh.erb"
+ mode 0755
+ variables({
+ :cassandra_ip => "HOSTIP"
+ })
+end
+
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb
new file mode 100644
index 0000000..7c40c50
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb
@@ -0,0 +1,35 @@
+cookbook_file "/tmp/sdctool.tar" do
+ source "sdctool.tar"
+ mode 0755
+end
+
+## extract sdctool.tar
+bash "install tar" do
+ cwd "/tmp"
+ code <<-EOH
+ /bin/tar xvf /tmp/sdctool.tar -C /tmp
+ EOH
+end
+
+
+template "/tmp/sdctool/config/configuration.yaml" do
+ source "configuration.yaml.erb"
+ mode 0755
+ variables({
+ :host_ip => node['HOST_IP'],
+ :catalog_port => node['BE'][:http_port],
+ :ssl_port => node['BE'][:https_port],
+ :cassandra_ip => node['Nodes']['CS'],
+ :rep_factor => 1,
+ :dc1 => "DC-"+node.chef_environment
+ })
+end
+
+template "/tmp/sdctool/config/elasticsearch.yml" do
+ source "elasticsearch.yml.erb"
+ mode 0755
+ variables({
+ :elastic_ip => "HOSTIP"
+ })
+end
+
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb
new file mode 100644
index 0000000..23ddcdd
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb
@@ -0,0 +1,27 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# These properties are used with GossipingPropertyFileSnitch and will
+# indicate the rack and dc for this node
+dc=<%= @dc %>
+rack=<%= @rack %>
+
+# Add a suffix to a datacenter name. Used by the Ec2Snitch and Ec2MultiRegionSnitch
+# to append a string to the EC2 region name.
+#dc_suffix=
+
+# Uncomment the following line to make this snitch prefer the internal ip when possible, as the Ec2MultiRegionSnitch does.
+# prefer_local=true
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb
new file mode 100644
index 0000000..d4b6032
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb
@@ -0,0 +1,824 @@
+# Cassandra storage config YAML
+
+# NOTE:
+# See http://wiki.apache.org/cassandra/StorageConfiguration for
+# full explanations of configuration directives
+# /NOTE
+
+# The name of the cluster. This is mainly used to prevent machines in
+# one logical cluster from joining another.
+cluster_name: '<%= @cassandra_cluster %>'
+
+# This defines the number of tokens randomly assigned to this node on the ring
+# The more tokens, relative to other nodes, the larger the proportion of data
+# that this node will store. You probably want all nodes to have the same number
+# of tokens assuming they have equal hardware capability.
+#
+# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
+# and will use the initial_token as described below.
+#
+# Specifying initial_token will override this setting on the node's initial start,
+# on subsequent starts, this setting will apply even if initial token is set.
+#
+# If you already have a cluster with 1 token per node, and wish to migrate to
+# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
+num_tokens: <%= @num_tokens %>
+
+# initial_token allows you to specify tokens manually. While you can use # it with
+# vnodes (num_tokens > 1, above) -- in which case you should provide a
+# comma-separated list -- it's primarily used when adding nodes # to legacy clusters
+# that do not have vnodes enabled.
+# initial_token:
+
+# May either be "true" or "false" to enable globally, or contain a list
+# of data centers to enable per-datacenter.
+# hinted_handoff_enabled: DC1,DC2
+# See http://wiki.apache.org/cassandra/HintedHandoff
+hinted_handoff_enabled: <%= node['cassandra']['hinted_handoff_enabled'] %>
+
+# this defines the maximum amount of time a dead host will have hints
+# generated. After it has been dead this long, new hints for it will not be
+# created until it has been seen alive and gone down again.
+max_hint_window_in_ms: 10800000 # 3 hours
+
+# Maximum throttle in KBs per second, per delivery thread. This will be
+# reduced proportionally to the number of nodes in the cluster. (If there
+# are two nodes in the cluster, each delivery thread will use the maximum
+# rate; if there are three, each will throttle to half of the maximum,
+# since we expect two nodes to be delivering hints simultaneously.)
+hinted_handoff_throttle_in_kb: 1024
+
+# Number of threads with which to deliver hints;
+# Consider increasing this number when you have multi-dc deployments, since
+# cross-dc handoff tends to be slower
+max_hints_delivery_threads: 2
+
+# Maximum throttle in KBs per second, total. This will be
+# reduced proportionally to the number of nodes in the cluster.
+batchlog_replay_throttle_in_kb: 1024
+
+# Authentication backend, implementing IAuthenticator; used to identify users
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
+# PasswordAuthenticator}.
+#
+# - AllowAllAuthenticator performs no checks - set it to disable authentication.
+# - PasswordAuthenticator relies on username/password pairs to authenticate
+# users. It keeps usernames and hashed passwords in system_auth.credentials table.
+# Please increase system_auth keyspace replication factor if you use this authenticator.
+authenticator: PasswordAuthenticator
+
+# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
+# CassandraAuthorizer}.
+#
+# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
+# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
+# increase system_auth keyspace replication factor if you use this authorizer.
+authorizer: AllowAllAuthorizer
+
+# Validity period for permissions cache (fetching permissions can be an
+# expensive operation depending on the authorizer, CassandraAuthorizer is
+# one example). Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthorizer.
+permissions_validity_in_ms: 2000
+
+# Refresh interval for permissions cache (if enabled).
+# After this interval, cache entries become eligible for refresh. Upon next
+# access, an async reload is scheduled and the old value returned until it
+# completes. If permissions_validity_in_ms is non-zero, then this must be
+# also.
+# Defaults to the same value as permissions_validity_in_ms.
+# permissions_update_interval_in_ms: 1000
+
+# The partitioner is responsible for distributing groups of rows (by
+# partition key) across nodes in the cluster. You should leave this
+# alone for new clusters. The partitioner can NOT be changed without
+# reloading all data, so when upgrading you should set this to the
+# same partitioner you were already using.
+#
+# Besides Murmur3Partitioner, partitioners included for backwards
+# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
+# OrderPreservingPartitioner.
+#
+partitioner: org.apache.cassandra.dht.Murmur3Partitioner
+
+# Directories where Cassandra should store data on disk. Cassandra
+# will spread data evenly across them, subject to the granularity of
+# the configured compaction strategy.
+data_file_directories:
+ - <%= @cassandra_data_dir %>
+
+
+# commit log. when running on magnetic HDD, this should be a
+# separate spindle than the data directories.
+# If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
+commitlog_directory: <%= @cassandra_commitlog_dir %>
+
+# policy for data disk failures:
+# stop_paranoid: shut down gossip and Thrift even for single-sstable errors.
+# stop: shut down gossip and Thrift, leaving the node effectively dead, but
+# can still be inspected via JMX.
+# best_effort: stop using the failed disk and respond to requests based on
+# remaining available sstables. This means you WILL see obsolete
+# data at CL.ONE!
+# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
+disk_failure_policy: stop
+
+# policy for commit disk failures:
+# stop: shut down gossip and Thrift, leaving the node effectively dead, but
+# can still be inspected via JMX.
+# stop_commit: shutdown the commit log, letting writes collect but
+# continuing to service reads, as in pre-2.0.5 Cassandra
+# ignore: ignore fatal errors and let the batches fail
+commit_failure_policy: stop
+
+# Maximum size of the key cache in memory.
+#
+# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
+# minimum, sometimes more. The key cache is fairly tiny for the amount of
+# time it saves, so it's worthwhile to use it at large numbers.
+# The row cache saves even more time, but must contain the entire row,
+# so it is extremely space-intensive. It's best to only use the
+# row cache if you have hot rows or static rows.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
+key_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the key cache. Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 14400 or 4 hours.
+key_cache_save_period: 14400
+
+# Number of keys from the key cache to save
+# Disabled by default, meaning all keys are going to be saved
+# key_cache_keys_to_save: 100
+
+# Maximum size of the row cache in memory.
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is 0, to disable row caching.
+row_cache_size_in_mb: 0
+
+# Duration in seconds after which Cassandra should
+# save the row cache. Caches are saved to saved_caches_directory as specified
+# in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 0 to disable saving the row cache.
+row_cache_save_period: 0
+
+# Number of keys from the row cache to save
+# Disabled by default, meaning all keys are going to be saved
+# row_cache_keys_to_save: 100
+
+# Maximum size of the counter cache in memory.
+#
+# Counter cache helps to reduce counter locks' contention for hot counter cells.
+# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before
+# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration
+# of the lock hold, helping with hot counter cell updates, but will not allow skipping
+# the read entirely. Only the local (clock, count) tuple of a counter cell is kept
+# in memory, not the whole counter, so it's relatively cheap.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache.
+# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache.
+counter_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the counter cache (keys only). Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Default is 7200 or 2 hours.
+counter_cache_save_period: 7200
+
+# Number of keys from the counter cache to save
+# Disabled by default, meaning all keys are going to be saved
+# counter_cache_keys_to_save: 100
+
+# The off-heap memory allocator. Affects storage engine metadata as
+# well as caches. Experiments show that JEMAlloc saves some memory
+# than the native GCC allocator (i.e., JEMalloc is more
+# fragmentation-resistant).
+#
+# Supported values are: NativeAllocator, JEMallocAllocator
+#
+# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
+# modify cassandra-env.sh as directed in the file.
+#
+# Defaults to NativeAllocator
+# memory_allocator: NativeAllocator
+
+# saved caches
+# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches.
+saved_caches_directory: /var/lib/cassandra/saved_caches
+
+# commitlog_sync may be either "periodic" or "batch."
+# When in batch mode, Cassandra won't ack writes until the commit log
+# has been fsynced to disk. It will wait
+# commitlog_sync_batch_window_in_ms milliseconds between fsyncs.
+# This window should be kept short because the writer threads will
+# be unable to do extra work while waiting. (You may need to increase
+# concurrent_writes for the same reason.)
+#
+# commitlog_sync: batch
+# commitlog_sync_batch_window_in_ms: 2
+#
+# the other option is "periodic" where writes may be acked immediately
+# and the CommitLog is simply synced every commitlog_sync_period_in_ms
+# milliseconds. By default this allows 1024*(CPU cores) pending
+# entries on the commitlog queue. If you are writing very large blobs,
+# you should reduce that; 16*cores works reasonably well for 1MB blobs.
+# It should be at least as large as the concurrent_writes setting.
+commitlog_sync: periodic
+commitlog_sync_period_in_ms: 10000
+
+# The size of the individual commitlog file segments. A commitlog
+# segment may be archived, deleted, or recycled once all the data
+# in it (potentially from each columnfamily in the system) has been
+# flushed to sstables.
+#
+# The default size is 32, which is almost always fine, but if you are
+# archiving commitlog segments (see commitlog_archiving.properties),
+# then you probably want a finer granularity of archiving; 8 or 16 MB
+# is reasonable.
+commitlog_segment_size_in_mb: 32
+
+# Reuse commit log files when possible. The default is false, and this
+# feature will be removed entirely in future versions of Cassandra.
+#commitlog_segment_recycling: false
+
+# any class that implements the SeedProvider interface and has a
+# constructor that takes a Map<String, String> of parameters will do.
+seed_provider:
+ # Addresses of hosts that are deemed contact points.
+ # Cassandra nodes use this list of hosts to find each other and learn
+ # the topology of the ring. You must change this if you are running
+ # multiple nodes!
+ - class_name: org.apache.cassandra.locator.SimpleSeedProvider
+ parameters:
+ # seeds is actually a comma-delimited list of addresses.
+ # Ex: "<ip1>,<ip2>,<ip3>"
+ - seeds: "<%= @seeds_address %>"
+
+# For workloads with more data than can fit in memory, Cassandra's
+# bottleneck will be reads that need to fetch data from
+# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
+# order to allow the operations to enqueue low enough in the stack
+# that the OS and drives can reorder them. Same applies to
+# "concurrent_counter_writes", since counter writes read the current
+# values before incrementing and writing them back.
+#
+# On the other hand, since writes are almost never IO bound, the ideal
+# number of "concurrent_writes" is dependent on the number of cores in
+# your system; (8 * number_of_cores) is a good rule of thumb.
+concurrent_reads: <%= node['cassandra']['concurrent_reads'] %>
+concurrent_writes: <%= node['cassandra']['concurrent_writes'] %>
+concurrent_counter_writes: 32
+
+
+# Total memory to use for sstable-reading buffers. Defaults to
+# the smaller of 1/4 of heap or 512MB.
+# file_cache_size_in_mb: 512
+
+# Total permitted memory to use for memtables. Cassandra will stop
+# accepting writes when the limit is exceeded until a flush completes,
+# and will trigger a flush based on memtable_cleanup_threshold
+# If omitted, Cassandra will set both to 1/4 the size of the heap.
+# memtable_heap_space_in_mb: 2048
+# memtable_offheap_space_in_mb: 2048
+
+# Ratio of occupied non-flushing memtable size to total permitted size
+# that will trigger a flush of the largest memtable. Lager mct will
+# mean larger flushes and hence less compaction, but also less concurrent
+# flush activity which can make it difficult to keep your disks fed
+# under heavy write load.
+#
+# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1)
+# memtable_cleanup_threshold: 0.11
+
+# Specify the way Cassandra allocates and manages memtable memory.
+# Options are:
+# heap_buffers: on heap nio buffers
+# offheap_buffers: off heap (direct) nio buffers
+# offheap_objects: native memory, eliminating nio buffer heap overhead
+memtable_allocation_type: heap_buffers
+
+# Total space to use for commitlogs. Since commitlog segments are
+# mmapped, and hence use up address space, the default size is 32
+# on 32-bit JVMs, and 8192 on 64-bit JVMs.
+#
+# If space gets above this value (it will round up to the next nearest
+# segment multiple), Cassandra will flush every dirty CF in the oldest
+# segment and remove it. So a small total commitlog space will tend
+# to cause more flush activity on less-active columnfamilies.
+# commitlog_total_space_in_mb: 8192
+
+# This sets the amount of memtable flush writer threads. These will
+# be blocked by disk io, and each one will hold a memtable in memory
+# while blocked.
+#
+# memtable_flush_writers defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+#
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#memtable_flush_writers: 8
+
+# A fixed memory pool size in MB for for SSTable index summaries. If left
+# empty, this will default to 5% of the heap size. If the memory usage of
+# all index summaries exceeds this limit, SSTables with low read rates will
+# shrink their index summaries in order to meet this limit. However, this
+# is a best-effort process. In extreme conditions Cassandra may need to use
+# more than this amount of memory.
+index_summary_capacity_in_mb:
+
+# How frequently index summaries should be resampled. This is done
+# periodically to redistribute memory from the fixed-size pool to sstables
+# proportional their recent read rates. Setting to -1 will disable this
+# process, leaving existing index summaries at their current sampling level.
+index_summary_resize_interval_in_minutes: 60
+
+# Whether to, when doing sequential writing, fsync() at intervals in
+# order to force the operating system to flush the dirty
+# buffers. Enable this to avoid sudden dirty buffer flushing from
+# impacting read latencies. Almost always a good idea on SSDs; not
+# necessarily on platters.
+trickle_fsync: false
+trickle_fsync_interval_in_kb: 10240
+
+# TCP port, for commands and data
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+storage_port: 7000
+
+# SSL port, for encrypted communication. Unused unless enabled in
+# encryption_options
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+ssl_storage_port: 7001
+
+# Address or interface to bind to and tell other Cassandra nodes to connect to.
+# You _must_ change this if you want multiple nodes to be able to communicate!
+#
+# Set listen_address OR listen_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+#
+# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
+# will always do the Right Thing _if_ the node is properly configured
+# (hostname, name resolution, etc), and the Right Thing is to use the
+# address associated with the hostname (it might not be).
+#
+# Setting listen_address to 0.0.0.0 is always wrong.
+#
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+listen_address: <%= @listen_address %>
+# listen_interface: eth0
+# listen_interface_prefer_ipv6: false
+
+# Address to broadcast to other Cassandra nodes
+# Leaving this blank will set it to the same value as listen_address
+broadcast_address: <%= @broadcast_address %>
+
+# Internode authentication backend, implementing IInternodeAuthenticator;
+# used to allow/disallow connections from peer nodes.
+# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
+
+# Whether to start the native transport server.
+# Please note that the address on which the native transport is bound is the
+# same as the rpc_address. The port however is different and specified below.
+start_native_transport: true
+# port for the CQL native transport to listen for clients on
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+native_transport_port: 9042
+# The maximum threads for handling requests when the native transport is used.
+# This is similar to rpc_max_threads though the default differs slightly (and
+# there is no native_transport_min_threads, idle threads will always be stopped
+# after 30 seconds).
+# native_transport_max_threads: 128
+#
+# The maximum size of allowed frame. Frame (requests) larger than this will
+# be rejected as invalid. The default is 256MB.
+# native_transport_max_frame_size_in_mb: 256
+
+# The maximum number of concurrent client connections.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections: -1
+
+# The maximum number of concurrent client connections per source ip.
+# The default is -1, which means unlimited.
+# native_transport_max_concurrent_connections_per_ip: -1
+
+# Whether to start the thrift rpc server.
+start_rpc: true
+
+# The address or interface to bind the Thrift RPC service and native transport
+# server to.
+#
+# Set rpc_address OR rpc_interface, not both. Interfaces must correspond
+# to a single address, IP aliasing is not supported.
+#
+# Leaving rpc_address blank has the same effect as on listen_address
+# (i.e. it will be based on the configured hostname of the node).
+#
+# Note that unlike listen_address, you can specify 0.0.0.0, but you must also
+# set broadcast_rpc_address to a value other than 0.0.0.0.
+#
+# For security reasons, you should not expose this port to the internet. Firewall it if needed.
+#
+# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address
+# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4
+# address will be used. If true the first ipv6 address will be used. Defaults to false preferring
+# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6.
+rpc_address: <%= @rpc_address %>
+# rpc_interface: eth1
+# rpc_interface_prefer_ipv6: false
+
+# port for Thrift to listen for clients on
+rpc_port: 9160
+
+# RPC address to broadcast to drivers and other Cassandra nodes. This cannot
+# be set to 0.0.0.0. If left blank, this will be set to the value of
+# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must
+# be set.
+broadcast_rpc_address: <%= @broadcast_rpc_address %>
+
+# enable or disable keepalive on rpc/native connections
+rpc_keepalive: true
+
+# Cassandra provides two out-of-the-box options for the RPC Server:
+#
+# sync -> One thread per thrift connection. For a very large number of clients, memory
+# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
+# per thread, and that will correspond to your use of virtual memory (but physical memory
+# may be limited depending on use of stack space).
+#
+# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
+# asynchronously using a small number of threads that does not vary with the amount
+# of thrift clients (and thus scales well to many clients). The rpc requests are still
+# synchronous (one thread per active request). If hsha is selected then it is essential
+# that rpc_max_threads is changed from the default value of unlimited.
+#
+# The default is sync because on Windows hsha is about 30% slower. On Linux,
+# sync/hsha performance is about the same, with hsha of course using less memory.
+#
+# Alternatively, can provide your own RPC server by providing the fully-qualified class name
+# of an o.a.c.t.TServerFactory that can create an instance of it.
+rpc_server_type: sync
+
+# Uncomment rpc_min|max_thread to set request pool size limits.
+#
+# Regardless of your choice of RPC server (see above), the number of maximum requests in the
+# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
+# RPC server, it also dictates the number of clients that can be connected at all).
+#
+# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
+# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
+# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
+#
+# rpc_min_threads: 16
+# rpc_max_threads: 2048
+
+# uncomment to set socket buffer sizes on rpc connections
+# rpc_send_buff_size_in_bytes:
+# rpc_recv_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# See:
+# /proc/sys/net/core/wmem_max
+# /proc/sys/net/core/rmem_max
+# /proc/sys/net/ipv4/tcp_wmem
+# /proc/sys/net/ipv4/tcp_wmem
+# and: man tcp
+# internode_send_buff_size_in_bytes:
+# internode_recv_buff_size_in_bytes:
+
+# Frame size for thrift (maximum message length).
+thrift_framed_transport_size_in_mb: 15
+
+# Set to true to have Cassandra create a hard link to each sstable
+# flushed or streamed locally in a backups/ subdirectory of the
+# keyspace data. Removing these links is the operator's
+# responsibility.
+incremental_backups: false
+
+# Whether or not to take a snapshot before each compaction. Be
+# careful using this option, since Cassandra won't clean up the
+# snapshots for you. Mostly useful if you're paranoid when there
+# is a data format change.
+snapshot_before_compaction: false
+
+# Whether or not a snapshot is taken of the data before keyspace truncation
+# or dropping of column families. The STRONGLY advised default of true
+# should be used to provide data safety. If you set this flag to false, you will
+# lose data on truncation or drop.
+auto_snapshot: true
+
+# When executing a scan, within or across a partition, we need to keep the
+# tombstones seen in memory so we can return them to the coordinator, which
+# will use them to make sure other replicas also know about the deleted rows.
+# With workloads that generate a lot of tombstones, this can cause performance
+# problems and even exaust the server heap.
+# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
+# Adjust the thresholds here if you understand the dangers and want to
+# scan more tombstones anyway. These thresholds may also be adjusted at runtime
+# using the StorageService mbean.
+tombstone_warn_threshold: 1000
+tombstone_failure_threshold: 100000
+
+# Granularity of the collation index of rows within a partition.
+# Increase if your rows are large, or if you have a very large
+# number of rows per partition. The competing goals are these:
+# 1) a smaller granularity means more index entries are generated
+# and looking up rows withing the partition by collation column
+# is faster
+# 2) but, Cassandra will keep the collation index in memory for hot
+# rows (as part of the key cache), so a larger granularity means
+# you can cache more hot rows
+column_index_size_in_kb: 64
+
+
+# Log WARN on any batch size exceeding this value. 5kb per batch by default.
+# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
+batch_size_warn_threshold_in_kb: 5
+
+
+# Log WARN on any batches not of type LOGGED than span across more partitions than this limit
+unlogged_batch_across_partitions_warn_threshold: 10
+
+# Number of simultaneous compactions to allow, NOT including
+# validation "compactions" for anti-entropy repair. Simultaneous
+# compactions can help preserve read performance in a mixed read/write
+# workload, by mitigating the tendency of small sstables to accumulate
+# during a single long running compactions. The default is usually
+# fine and if you experience problems with compaction running too
+# slowly or too fast, you should look at
+# compaction_throughput_mb_per_sec first.
+#
+# concurrent_compactors defaults to the smaller of (number of disks,
+# number of cores), with a minimum of 2 and a maximum of 8.
+#
+# If your data directories are backed by SSD, you should increase this
+# to the number of cores.
+#concurrent_compactors: 1
+
+# Throttles compaction to the given total throughput across the entire
+# system. The faster you insert data, the faster you need to compact in
+# order to keep the sstable count down, but in general, setting this to
+# 16 to 32 times the rate you are inserting data is more than sufficient.
+# Setting this to 0 disables throttling. Note that this account for all types
+# of compaction, including validation compaction.
+compaction_throughput_mb_per_sec: 16
+
+# Log a warning when compacting partitions larger than this value
+compaction_large_partition_warning_threshold_mb: 100
+
+# When compacting, the replacement sstable(s) can be opened before they
+# are completely written, and used in place of the prior sstables for
+# any range that has been written. This helps to smoothly transfer reads
+# between the sstables, reducing page cache churn and keeping hot rows hot
+sstable_preemptive_open_interval_in_mb: 50
+
+# Throttles all outbound streaming file transfers on this node to the
+# given total throughput in Mbps. This is necessary because Cassandra does
+# mostly sequential IO when streaming data during bootstrap or repair, which
+# can lead to saturating the network connection and degrading rpc performance.
+# When unset, the default is 200 Mbps or 25 MB/s.
+# stream_throughput_outbound_megabits_per_sec: 200
+
+# Throttles all streaming file transfer between the datacenters,
+# this setting allows users to throttle inter dc stream throughput in addition
+# to throttling all network stream traffic as configured with
+# stream_throughput_outbound_megabits_per_sec
+# When unset, the default is 200 Mbps or 25 MB/s
+# inter_dc_stream_throughput_outbound_megabits_per_sec: 200
+
+# How long the coordinator should wait for read operations to complete
+read_request_timeout_in_ms: 5000
+# How long the coordinator should wait for seq or index scans to complete
+range_request_timeout_in_ms: 10000
+# How long the coordinator should wait for writes to complete
+write_request_timeout_in_ms: 2000
+# How long the coordinator should wait for counter writes to complete
+counter_write_request_timeout_in_ms: 5000
+# How long a coordinator should continue to retry a CAS operation
+# that contends with other proposals for the same row
+cas_contention_timeout_in_ms: 1000
+# How long the coordinator should wait for truncates to complete
+# (This can be much longer, because unless auto_snapshot is disabled
+# we need to flush first so we can snapshot before removing the data.)
+truncate_request_timeout_in_ms: 60000
+# The default timeout for other, miscellaneous operations
+request_timeout_in_ms: 10000
+
+# Enable operation timeout information exchange between nodes to accurately
+# measure request timeouts. If disabled, replicas will assume that requests
+# were forwarded to them instantly by the coordinator, which means that
+# under overload conditions we will waste that much extra time processing
+# already-timed-out requests.
+#
+# Warning: before enabling this property make sure to ntp is installed
+# and the times are synchronized between the nodes.
+cross_node_timeout: false
+
+# Set socket timeout for streaming operation.
+# The stream session is failed if no data/ack is received by any of the participants
+# within that period, which means this should also be sufficient to stream a large
+# sstable or rebuild table indexes.
+# Default value is 86400000ms, which means stale streams timeout after 24 hours.
+# A value of zero means stream sockets should never time out.
+# streaming_socket_timeout_in_ms: 86400000
+
+# phi value that must be reached for a host to be marked down.
+# most users should never need to adjust this.
+# phi_convict_threshold: 8
+phi_convict_threshold: <%= node['cassandra']['phi_convict_threshold'] %>
+
+# endpoint_snitch -- Set this to a class that implements
+# IEndpointSnitch. The snitch has two functions:
+# - it teaches Cassandra enough about your network topology to route
+# requests efficiently
+# - it allows Cassandra to spread replicas around your cluster to avoid
+# correlated failures. It does this by grouping machines into
+# "datacenters" and "racks." Cassandra will do its best not to have
+# more than one replica on the same "rack" (which may not actually
+# be a physical location)
+#
+# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH
+# ONCE DATA IS INSERTED INTO THE CLUSTER. This would cause data loss.
+# This means that if you start with the default SimpleSnitch, which
+# locates every node on "rack1" in "datacenter1", your only options
+# if you need to add another datacenter are GossipingPropertyFileSnitch
+# (and the older PFS). From there, if you want to migrate to an
+# incompatible snitch like Ec2Snitch you can do it by adding new nodes
+# under Ec2Snitch (which will locate them in a new "datacenter") and
+# decommissioning the old ones.
+#
+# Out of the box, Cassandra provides
+# - SimpleSnitch:
+# Treats Strategy order as proximity. This can improve cache
+# locality when disabling read repair. Only appropriate for
+# single-datacenter deployments.
+# - GossipingPropertyFileSnitch
+# This should be your go-to snitch for production use. The rack
+# and datacenter for the local node are defined in
+# cassandra-rackdc.properties and propagated to other nodes via
+# gossip. If cassandra-topology.properties exists, it is used as a
+# fallback, allowing migration from the PropertyFileSnitch.
+# - PropertyFileSnitch:
+# Proximity is determined by rack and data center, which are
+# explicitly configured in cassandra-topology.properties.
+# - Ec2Snitch:
+# Appropriate for EC2 deployments in a single Region. Loads Region
+# and Availability Zone information from the EC2 API. The Region is
+# treated as the datacenter, and the Availability Zone as the rack.
+# Only private IPs are used, so this will not work across multiple
+# Regions.
+# - Ec2MultiRegionSnitch:
+# Uses public IPs as broadcast_address to allow cross-region
+# connectivity. (Thus, you should set seed addresses to the public
+# IP as well.) You will need to open the storage_port or
+# ssl_storage_port on the public IP firewall. (For intra-Region
+# traffic, Cassandra will switch to the private IP after
+# establishing a connection.)
+# - RackInferringSnitch:
+# Proximity is determined by rack and data center, which are
+# assumed to correspond to the 3rd and 2nd octet of each node's IP
+# address, respectively. Unless this happens to match your
+# deployment conventions, this is best used as an example of
+# writing a custom Snitch class and is provided in that spirit.
+#
+# You can use a custom Snitch by setting this to the full class name
+# of the snitch, which will be assumed to be on your classpath.
+endpoint_snitch: GossipingPropertyFileSnitch
+
+# controls how often to perform the more expensive part of host score
+# calculation
+dynamic_snitch_update_interval_in_ms: 100
+# controls how often to reset all host scores, allowing a bad host to
+# possibly recover
+dynamic_snitch_reset_interval_in_ms: 600000
+# if set greater than zero and read_repair_chance is < 1.0, this will allow
+# 'pinning' of replicas to hosts in order to increase cache capacity.
+# The badness threshold will control how much worse the pinned host has to be
+# before the dynamic snitch will prefer other replicas over it. This is
+# expressed as a double which represents a percentage. Thus, a value of
+# 0.2 means Cassandra would continue to prefer the static snitch values
+# until the pinned host was 20% worse than the fastest.
+dynamic_snitch_badness_threshold: 0.1
+
+# request_scheduler -- Set this to a class that implements
+# RequestScheduler, which will schedule incoming client requests
+# according to the specific policy. This is useful for multi-tenancy
+# with a single Cassandra cluster.
+# NOTE: This is specifically for requests from the client and does
+# not affect inter node communication.
+# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
+# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
+# client requests to a node with a separate queue for each
+# request_scheduler_id. The scheduler is further customized by
+# request_scheduler_options as described below.
+request_scheduler: org.apache.cassandra.scheduler.NoScheduler
+
+# Scheduler Options vary based on the type of scheduler
+# NoScheduler - Has no options
+# RoundRobin
+# - throttle_limit -- The throttle_limit is the number of in-flight
+# requests per client. Requests beyond
+# that limit are queued up until
+# running requests can complete.
+# The value of 80 here is twice the number of
+# concurrent_reads + concurrent_writes.
+# - default_weight -- default_weight is optional and allows for
+# overriding the default which is 1.
+# - weights -- Weights are optional and will default to 1 or the
+# overridden default_weight. The weight translates into how
+# many requests are handled during each turn of the
+# RoundRobin, based on the scheduler id.
+#
+# request_scheduler_options:
+# throttle_limit: 80
+# default_weight: 5
+# weights:
+# Keyspace1: 1
+# Keyspace2: 5
+
+# request_scheduler_id -- An identifier based on which to perform
+# the request scheduling. Currently the only valid option is keyspace.
+# request_scheduler_id: keyspace
+
+# Enable or disable inter-node encryption
+# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
+# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
+# suite for authentication, key exchange and encryption of the actual data transfers.
+# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
+# NOTE: No custom encryption options are enabled at the moment
+# The available internode options are : all, none, dc, rack
+#
+# If set to dc cassandra will encrypt the traffic between the DCs
+# If set to rack cassandra will encrypt the traffic between the racks
+#
+# The passwords used in these options must match the passwords used when generating
+# the keystore and truststore. For instructions on generating these files, see:
+# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
+#
+server_encryption_options:
+ internode_encryption: none
+ keystore: <%= @cassandra_truststore_dir %>/.keystore
+ keystore_password: Aa123456
+ truststore: <%= @cassandra_truststore_dir %>/.truststore
+ truststore_password: Aa123456
+ # More advanced defaults below:
+ # protocol: TLS
+ # algorithm: SunX509
+ # store_type: JKS
+ # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+ # require_client_auth: false
+
+# enable or disable client/server encryption.
+client_encryption_options:
+ enabled: false
+ keystore: <%= @cassandra_truststore_dir %>/.keystore
+ keystore_password: Aa123456
+ # require_client_auth: false
+ # Set trustore and truststore_password if require_client_auth is true
+ # truststore: conf/.truststore
+ # truststore_password: cassandra
+ # More advanced defaults below:
+ # protocol: TLS
+ # algorithm: SunX509
+ # store_type: JKS
+ # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+
+# internode_compression controls whether traffic between nodes is
+# compressed.
+# can be: all - all traffic is compressed
+# dc - traffic between different datacenters is compressed
+# none - nothing is compressed.
+internode_compression: all
+
+# Enable or disable tcp_nodelay for inter-dc communication.
+# Disabling it will result in larger (but fewer) network packets being sent,
+# reducing overhead from the TCP protocol itself, at the cost of increasing
+# latency if you block for cross-datacenter responses.
+inter_dc_tcp_nodelay: false
+
+# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level
+# Adjust the threshold based on your application throughput requirement
+# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level
+# gc_warn_threshold_in_ms: 1000
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb
new file mode 100644
index 0000000..e33ece4
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb
@@ -0,0 +1,459 @@
+identificationHeaderFields:
+ - HTTP_IV_USER
+ - HTTP_CSP_FIRSTNAME
+ - HTTP_CSP_LASTNAME
+ - HTTP_IV_REMOTE_ADDRESS
+ - HTTP_CSP_WSTYPE
+
+
+# catalog backend hostname
+beFqdn: <%= @host_ip %>
+
+# catalog backend http port
+beHttpPort: <%= @catalog_port %>
+
+# catalog backend http context
+beContext: /sdc/rest/config/get
+
+# catalog backend protocol
+beProtocol: http
+
+# catalog backend ssl port
+beSslPort: <%= @ssl_port %>
+version: 1.0
+released: 2012-11-30
+
+titanCfgFile: /var/lib/jetty/config/catalog-be/titan.properties
+titanInMemoryGraph: false
+titanLockTimeout: 1800
+# The interval to try and reconnect to titan DB when it is down during ASDC startup:
+titanReconnectIntervalInSeconds: 3
+
+# The read timeout towards Titan DB when health check is invoked:
+titanHealthCheckReadTimeout: 1
+
+# The interval to try and reconnect to Elasticsearch when it is down during ASDC startup:
+
+esReconnectIntervalInSeconds: 3
+uebHealthCheckReconnectIntervalInSeconds: 15
+uebHealthCheckReadTimeout: 4
+
+# Protocols
+protocols:
+ - http
+ - https
+
+# Users
+users:
+ tom: passwd
+ bob: passwd
+
+
+cassandraConfig:
+ cassandraHosts: [<%= @cassandra_ip %>]
+ localDataCenter:
+ reconnectTimeout : 30000
+ authenticate: true
+ username: asdc_user
+ password: Aa1234%^!
+ ssl: false
+ truststorePath : /config/.truststore
+ truststorePassword : Aa123456
+ keySpaces:
+ - { name: dox, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']}
+ - { name: sdcaudit, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']}
+ - { name: sdcartifact, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']}
+ - { name: sdccomponent, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']}
+
+#Application-specific settings of ES
+elasticSearch:
+ # Mapping of index prefix to time-based frame. For example, if below is configured:
+ #
+ # - indexPrefix: auditingevents
+ # creationPeriod: minute
+ #
+ # then ES object of type which is mapped to "auditingevents-*" template, and created on 2015-12-23 13:24:54, will enter "auditingevents-2015-12-23-13-24" index.
+ # Another object created on 2015-12-23 13:25:54, will enter "auditingevents-2015-12-23-13-25" index.
+ # If creationPeriod: month, both of the above will enter "auditingevents-2015-12" index.
+ #
+ # PLEASE NOTE: the timestamps are created in UTC/GMT timezone! This is needed so that timestamps will be correctly presented in Kibana.
+ #
+ # Legal values for creationPeriod - year, month, day, hour, minute, none (meaning no time-based behaviour).
+ #
+ # If no creationPeriod is configured for indexPrefix, default behavour is creationPeriod: month.
+
+ indicesTimeFrequency:
+ - indexPrefix: auditingevents
+ creationPeriod: month
+ - indexPrefix: monitoring_events
+ creationPeriod: month
+artifactTypes:
+ - CHEF
+ - PUPPET
+ - SHELL
+ - YANG
+ - YANG_XML
+ - HEAT
+ - BPEL
+ - DG_XML
+ - MURANO_PKG
+ - WORKFLOW
+ - NETWORK_CALL_FLOW
+ - TOSCA_TEMPLATE
+ - TOSCA_CSAR
+ - AAI_SERVICE_MODEL
+ - AAI_VF_MODEL
+ - AAI_VF_MODULE_MODEL
+ - AAI_VF_INSTANCE_MODEL
+ - OTHER
+
+
+licenseTypes:
+ - User
+ - Installation
+ - CPU
+
+#Deployment artifacts placeHolder
+resourceTypes: &allResourceTypes
+ - VFC
+ - CP
+ - VL
+ - VF
+
+# validForResourceTypes usage
+# validForResourceTypes:
+# - VF
+# - VL
+deploymentResourceArtifacts:
+
+
+deploymentResourceInstanceArtifacts:
+ heatEnv:
+ displayName: "HEAT ENV"
+ type: HEAT_ENV
+ description: "Auto-generated HEAT Environment deployment artifact"
+ fileExtension: "env"
+
+#tosca artifacts placeholders
+toscaArtifacts:
+ assetToscaTemplate:
+ artifactName: -template.yml
+ displayName: Tosca Template
+ type: TOSCA_TEMPLATE
+ description: TOSCA representation of the asset
+ assetToscaCsar:
+ artifactName: -csar.csar
+ displayName: Tosca Model
+ type: TOSCA_CSAR
+ description: TOSCA definition package of the asset
+
+#Informational artifacts placeHolder
+excludeResourceCategory:
+ - Generic
+informationalResourceArtifacts:
+ features:
+ displayName: Features
+ type: OTHER
+ capacity:
+ displayName: Capacity
+ type: OTHER
+ vendorTestResult:
+ displayName: Vendor Test Result
+ type: OTHER
+ testScripts:
+ displayName: Test Scripts
+ type: OTHER
+ cloudQuestionnaire:
+ displayName: Cloud Questionnaire (completed)
+ type: OTHER
+ HEATTemplateFromVendor:
+ displayName: HEAT Template from Vendor
+ type: HEAT
+ resourceSecurityTemplate:
+ displayName: Resource Security Template
+ type: OTHER
+
+excludeServiceCategory:
+
+informationalServiceArtifacts:
+ serviceArtifactPlan:
+ displayName: Service Artifact Plan
+ type: OTHER
+ summaryOfImpactsToECOMPElements:
+ displayName: Summary of impacts to ECOMP elements,OSSs, BSSs
+ type: OTHER
+ controlLoopFunctions:
+ displayName: Control Loop Functions
+ type: OTHER
+ dimensioningInfo:
+ displayName: Dimensioning Info
+ type: OTHER
+ affinityRules:
+ displayName: Affinity Rules
+ type: OTHER
+ operationalPolicies:
+ displayName: Operational Policies
+ type: OTHER
+ serviceSpecificPolicies:
+ displayName: Service-specific Policies
+ type: OTHER
+ engineeringRules:
+ displayName: Engineering Rules (ERD)
+ type: OTHER
+ distributionInstructions:
+ displayName: Distribution Instructions
+ type: OTHER
+ certificationTestResults:
+ displayName: TD Certification Test Results
+ type: OTHER
+ deploymentVotingRecord:
+ displayName: Deployment Voting Record
+ type: OTHER
+ serviceQuestionnaire:
+ displayName: Service Questionnaire
+ type: OTHER
+ serviceSecurityTemplate:
+ displayName: Service Security Template
+ type: OTHER
+
+serviceApiArtifacts:
+ configuration:
+ displayName: Configuration
+ type: OTHER
+ instantiation:
+ displayName: Instantiation
+ type: OTHER
+ monitoring:
+ displayName: Monitoring
+ type: OTHER
+ reporting:
+ displayName: Reporting
+ type: OTHER
+ logging:
+ displayName: Logging
+ type: OTHER
+ testing:
+ displayName: Testing
+ type: OTHER
+
+
+additionalInformationMaxNumberOfKeys: 50
+
+systemMonitoring:
+ enabled: true
+ isProxy: false
+ probeIntervalInSeconds: 15
+defaultHeatArtifactTimeoutMinutes: 60
+
+serviceDeploymentArtifacts:
+ YANG_XML:
+ acceptedTypes:
+ - xml
+ VNF_CATALOG:
+ acceptedTypes:
+ - xml
+ MODEL_INVENTORY_PROFILE:
+ acceptedTypes:
+ - xml
+ MODEL_QUERY_SPEC:
+ acceptedTypes:
+ - xml
+ AAI_SERVICE_MODEL:
+ acceptedTypes:
+ - xml
+ AAI_VF_MODULE_MODEL:
+ acceptedTypes:
+ - xml
+ AAI_VF_INSTANCE_MODEL:
+ acceptedTypes:
+ - xml
+ OTHER:
+ acceptedTypes:
+
+
+resourceDeploymentArtifacts:
+ HEAT:
+ acceptedTypes:
+ - yaml
+ - yml
+ validForResourceTypes: *allResourceTypes
+ HEAT_VOL:
+ acceptedTypes:
+ - yaml
+ - yml
+ validForResourceTypes: *allResourceTypes
+ HEAT_NET:
+ acceptedTypes:
+ - yaml
+ - yml
+ validForResourceTypes: *allResourceTypes
+ HEAT_NESTED:
+ acceptedTypes:
+ - yaml
+ - yml
+ validForResourceTypes: *allResourceTypes
+ HEAT_ARTIFACT:
+ acceptedTypes:
+ validForResourceTypes: *allResourceTypes
+ YANG_XML:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ VNF_CATALOG:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ VF_LICENSE:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ VENDOR_LICENSE:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ MODEL_INVENTORY_PROFILE:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ MODEL_QUERY_SPEC:
+ acceptedTypes:
+ - xml
+ validForResourceTypes: *allResourceTypes
+ APPC_CONFIG:
+ acceptedTypes:
+ validForResourceTypes:
+ - VF
+ #DCAE Artifacts
+ DCAE_TOSCA:
+ acceptedTypes:
+ - yml
+ - yaml
+ validForResourceTypes:
+ - VF
+ DCAE_JSON:
+ acceptedTypes:
+ - json
+ validForResourceTypes:
+ - VF
+ DCAE_POLICY:
+ acceptedTypes:
+ - emf
+ validForResourceTypes:
+ - VF
+ DCAE_DOC:
+ acceptedTypes:
+ validForResourceTypes:
+ - VF
+ DCAE_EVENT:
+ acceptedTypes:
+ validForResourceTypes:
+ - VF
+#AAI Artifacts
+ AAI_VF_MODEL:
+ acceptedTypes:
+ - xml
+ validForResourceTypes:
+ - VF
+ AAI_VF_MODULE_MODEL:
+ acceptedTypes:
+ - xml
+ validForResourceTypes:
+ - VF
+ OTHER:
+ acceptedTypes:
+ validForResourceTypes: *allResourceTypes
+
+resourceInstanceDeploymentArtifacts:
+ HEAT_ENV:
+ acceptedTypes:
+ - env
+ VF_MODULES_METADATA:
+ acceptedTypes:
+ - json
+#DCAE_VF Instance Artifacts
+ DCAE_INVENTORY_TOSCA:
+ acceptedTypes:
+ - yml
+ - yaml
+ DCAE_INVENTORY_JSON:
+ acceptedTypes:
+ - json
+ DCAE_INVENTORY_POLICY:
+ acceptedTypes:
+ - emf
+ DCAE_INVENTORY_DOC:
+ acceptedTypes:
+ DCAE_INVENTORY_BLUEPRINT:
+ acceptedTypes:
+ DCAE_INVENTORY_EVENT:
+ acceptedTypes:
+resourceInformationalDeployedArtifacts:
+
+
+requirementsToFulfillBeforeCert:
+
+capabilitiesToConsumeBeforeCert:
+
+unLoggedUrls:
+ - /sdc2/rest/healthCheck
+
+cleanComponentsConfiguration:
+ cleanIntervalInMinutes: 1440
+ componentsToClean:
+ - Resource
+ - Service
+
+artifactsIndex: resources
+
+heatEnvArtifactHeader:
+ ""
+heatEnvArtifactFooter:
+ ""
+
+onboarding:
+ protocol: http
+ host: <%= @host_ip %>
+ port: <%= @catalog_port %>
+ downloadCsarUri: "/onboarding-api/v1.0/vendor-software-products/packages"
+
+
+# #GSS IDNS
+switchoverDetector:
+ gBeFqdn:
+ gFeFqdn:
+ beVip: 1.2.3.4
+ feVip: 1.2.3.4
+ beResolveAttempts: 3
+ feResolveAttempts: 3
+ enabled: false
+ interval: 60
+ changePriorityUser: ecompasdc
+ changePriorityPassword: ecompasdc123
+ publishNetworkUrl:
+ publishNetworkBody: '{"note":"comment"}'
+ groups:
+ beSet: { changePriorityUrl: "", changePriorityBody: '{"name":"","uri":"","no_ad_redirection":false,"v4groups":{"failover_groups":["","","failover_policy":["FAILALL"]},"comment":"","intended_app_proto":"DNS"}'}
+ feSet: { changePriorityUrl: "", changePriorityBody: '{"name":"","uri":"","no_ad_redirection":false,"v4groups":{"failover_groups":["",""],"failover_policy":["FAILALL"]},"comment":"","intended_app_proto":"DNS"}'}
+
+applicationL1Cache:
+ datatypes:
+ enabled: true
+ firstRunDelay: 10
+ pollIntervalInSec: 60
+
+applicationL2Cache:
+ enabled: true
+ catalogL1Cache:
+ enabled: true
+ resourcesSizeInCache: 300
+ servicesSizeInCache: 200
+ productsSizeInCache: 100
+ queue:
+ syncIntervalInSecondes: 43200
+ waitOnShutDownInMinutes: 10
+ numberOfCacheWorkers: 4
+
+toscaValidators:
+ stringMaxLength: 65536
+
+disableAudit: false
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb
new file mode 100644
index 0000000..6b97224
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+CASSANDRA_USER=asdc_user
+CASSANDRA_PASS=Aa1234%^!
+CASSANDRA_IP=<%= @cassandra_ip %>
+
+pass_changed=99
+retry_num=1
+is_up=0
+while [ $is_up -eq 0 -a $retry_num -le 100 ]; do
+ echo "exit" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP > /dev/null 2>&1
+ res1=$?
+ echo "exit" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP > /dev/null 2>&1
+ res2=$?
+
+ if [ $res1 -eq 0 -o $res2 -eq 0 ]; then
+ echo "`date` --- cqlsh is enabled to connect."
+ is_up=1
+ [ $res1 -eq 0 ] && pass_changed=0
+ [ $res2 -eq 0 ] && pass_changed=1
+ else
+ echo "`date` --- cqlsh is NOT enabled to connect yet. sleep 5"
+ sleep 5
+ fi
+ let "retry_num++"
+done
+
+
+echo "pass_changed=[$pass_changed]"
+case $pass_changed in
+ 0)
+ cassandra_user_exist=`echo "list users;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP |grep -c $CASSANDRA_USER`
+ if [ $cassandra_user_exist -eq 1 ] ; then
+ echo "cassandra user $CASSANDRA_USER already exist"
+ echo "alter user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP
+ else
+ echo "Going to create $CASSANDRA_USER"
+ echo "create user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP
+ fi
+ echo "Modify cassandra password"
+ echo "ALTER USER cassandra WITH PASSWORD '$CASSANDRA_PASS';" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP
+ ;;
+ 1)
+ cassandra_user_exist=`echo "list users;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP |grep -c $CASSANDRA_USER`
+ if [ $cassandra_user_exist -eq 1 ] ; then
+ echo "cassandra user $CASSANDRA_USER already exist"
+ echo "alter user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP
+ else
+ echo "Going to create $CASSANDRA_USER"
+ echo "create user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP
+ fi
+ ;;
+ *)
+ echo "pass_changed doen't have value"
+ ;;
+esac
+
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb
new file mode 100644
index 0000000..701d320
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+CASSANDRA_USER=cassandra
+CASSANDRA_PASS=Aa1234%^!
+CASSANDRA_IP=<%= @cassandra_ip %>
+
+REPLICATION_FACTOR=1
+KEYSPACE="CREATE KEYSPACE IF NOT EXISTS dox WITH REPLICATION = { 'class' : 'SimpleStrategy', 'replication_factor' : $REPLICATION_FACTOR };"
+
+keyspaces=`echo "describe keyspaces" | cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP 2>/dev/null`
+if [ "$keyspaces" == "" ] ; then
+ echo "keyspace is empty, probably connection error. Exit..."
+ exit 1
+fi
+
+echo "run create_dox_db.cql"
+echo $KEYSPACE > /tmp/create_dox_db.cql
+cat <<'EOF' >> /tmp/create_dox_db.cql
+USE dox;
+CREATE TYPE IF NOT EXISTS version (major int, minor int);
+CREATE TYPE IF NOT EXISTS user_candidate_version (version frozen<version>, user text);
+CREATE TABLE IF NOT EXISTS version_info (entity_type text, entity_id text, active_version frozen<version>, status text, candidate frozen<user_candidate_version>, viewable_versions set<frozen<version>>, latest_final_version frozen<version>, PRIMARY KEY (entity_type, entity_id));
+CREATE TABLE IF NOT EXISTS version_info_deleted (entity_type text, entity_id text, active_version frozen<version>, status text, candidate frozen<user_candidate_version>, viewable_versions set<frozen<version>>, latest_final_version frozen<version>, PRIMARY KEY (entity_type, entity_id));
+CREATE TABLE IF NOT EXISTS unique_value (type text, value text, PRIMARY KEY ((type, value)));
+CREATE TYPE IF NOT EXISTS choice_or_other (result text);
+CREATE TYPE IF NOT EXISTS multi_choice_or_other (results set<text>);
+CREATE TABLE IF NOT EXISTS vendor_license_model (vlm_id text, version frozen<version>, vendor_name text, description text, icon text, PRIMARY KEY ((vlm_id, version)));
+CREATE TABLE IF NOT EXISTS license_agreement (vlm_id text, version frozen<version>, la_id text, name text, description text, lic_term frozen<choice_or_other>, req_const text, fg_ids set<text>, PRIMARY KEY ((vlm_id, version), la_id));
+CREATE TABLE IF NOT EXISTS feature_group (vlm_id text, version frozen<version>, fg_id text, name text, description text, part_num text, ep_ids set<text>, lkg_ids set<text>, ref_la_ids set<text>, PRIMARY KEY ((vlm_id, version), fg_id));
+CREATE TABLE IF NOT EXISTS license_key_group (vlm_id text, version frozen<version>, lkg_id text,name text,description text, type text, operational_scope frozen<multi_choice_or_other>, ref_fg_ids set<text>,version_uuid text,PRIMARY KEY ((vlm_id, version), lkg_id));
+CREATE TABLE IF NOT EXISTS entitlement_pool (vlm_id text, version frozen<version>, ep_id text,name text,description text,threshold float,threshold_unit text,entitlement_metric frozen<choice_or_other>,increments text,aggregation_func frozen<choice_or_other>, operational_scope frozen<multi_choice_or_other>, time frozen<choice_or_other>,manufacturer_ref_num text,ref_fg_ids set<text>,version_uuid text,PRIMARY KEY ((vlm_id, version), ep_id));
+CREATE TABLE IF NOT EXISTS vsp_information (VSP_ID text, version frozen<version>,NAME text,DESCRIPTION text,CATEGORY text,SUB_CATEGORY text,ICON text,PACKAGE_NAME text,PACKAGE_VERSION text,vendor_name text, vendor_id text,LICENSE_AGREEMENT text,FEATURE_GROUPS list<text>,VALIDATION_DATA text,CONTENT_DATA blob, questionnaire_data text, vlm_version frozen<version>, PRIMARY KEY ((VSP_ID, version)));
+CREATE TABLE IF NOT EXISTS package_details (VSP_ID text, version frozen<version>,DISPLAY_NAME text,vsp_name text,vsp_description text,VENDOR_NAME text,CATEGORY text,SUB_CATEGORY text,VENDOR_RELEASE text,PACKAGE_CHECKSUM text,PACKAGE_TYPE text,TRANSLATE_CONTENT blob,PRIMARY KEY ((VSP_ID, version)));
+CREATE TABLE IF NOT EXISTS vsp_network (vsp_id text, version frozen<version>, network_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), network_id));
+CREATE TABLE IF NOT EXISTS vsp_component (vsp_id text, version frozen<version>, component_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), component_id));
+CREATE TABLE IF NOT EXISTS vsp_component_nic (vsp_id text, version frozen<version>, component_id text, nic_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), component_id, nic_id));
+CREATE TABLE IF NOT EXISTS vsp_process (vsp_id text, version frozen<version>, component_id text, process_id text, name text, description text, artifact_name text, artifact blob, PRIMARY KEY ((vsp_id, version), component_id, process_id));
+CREATE TABLE IF NOT EXISTS vsp_service_artifact (vsp_id text, version frozen<version>, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name));
+CREATE TABLE IF NOT EXISTS vsp_service_template (vsp_id text, version frozen<version>, base_name text static, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name));
+CREATE TABLE IF NOT EXISTS vsp_enriched_service_template (vsp_id text, version frozen<version>, base_name text static, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name));
+CREATE TABLE IF NOT EXISTS vsp_enriched_service_artifact (vsp_id text, version frozen<version>, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name));
+CREATE TABLE IF NOT EXISTS application_config (namespace text, key text, value text, PRIMARY KEY (namespace, key));
+CREATE TABLE IF NOT EXISTS dox.Action (actionUUID text, actionInvariantUUID text, version frozen<version>, status text, name text, vendor_list set<text>, category_list set<text>, timestamp timestamp, user text, supportedModels set<text>, supportedComponents set<text>, data text, PRIMARY KEY ((actionInvariantUUID, version)));
+CREATE INDEX IF NOT EXISTS action_supportedComponents ON dox.Action (supportedComponents);
+CREATE INDEX IF NOT EXISTS action_category_list ON dox.Action (category_list);
+CREATE INDEX IF NOT EXISTS action_supportedModels ON dox.Action (supportedModels);
+CREATE INDEX IF NOT EXISTS action_vendor_list ON dox.Action (vendor_list);
+CREATE INDEX IF NOT EXISTS action_actionUUID ON dox.Action (actionUUID);
+CREATE TABLE IF NOT EXISTS dox.ecompcomponent(id text PRIMARY KEY, name text);
+CREATE TABLE IF NOT EXISTS vsp_component_artifact (vsp_id text, version frozen<version>, component_id text, artifact_type text, artifact_id text, name text, description text, artifact blob, PRIMARY KEY ((vsp_id, version), component_id, artifact_type, artifact_id));
+CREATE INDEX IF NOT EXISTS action_name ON dox.Action (name);
+CREATE TABLE IF NOT EXISTS action_artifact(artifactuuid text, effective_version int, artifact blob, PRIMARY KEY(artifactuuid, effective_version)) WITH CLUSTERING ORDER BY (effective_version DESC);
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.component', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${component.name}" ], "default": "${component.name}"</#if> }, "displayName": { "type": "string"<#if !manual && component.displayName??>, "enum": [ "${component.displayName}" ], "default": "${component.displayName}"</#if> }, "description": { "type": "string" } }, "additionalProperties": false, "required": [ "name"<#if !manual && component.displayName??>, "displayName"</#if> ] }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.network', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${network.name}" ], "default": "${network.name}"</#if> }, "dhcp": { "type": "boolean"<#if !manual>, "enum": [ ${network.dhcp?c} ], "default": ${network.dhcp?c}</#if> } }, "additionalProperties": false, "required": [ "name", "dhcp" ] }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.nic', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${nic.name}" ], "default": "${nic.name}" </#if> }, "description": { "type": "string" }<#if !manual><#if nic.networkId??>, "networkId": { "type": "string", "enum": [ "${nic.networkId}" ], "default": "${nic.networkId}" } </#if><#else>, "networkId": { "type": "string", "enum": [<#list networkIds as networkId> "${networkId}"<#sep>,</#list> ] } </#if> }, "additionalProperties": false, "required": [ "name" ] }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.component', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "general": { "type": "object", "properties": { "hypervisor": { "type": "object", "properties": { "hypervisor": { "type": "string", "enum": [ "KVM", "VMWare ESXi" ], "default": "KVM" }, "drivers": { "type": "string", "maxLength": 300, "pattern": "^[A-Za-z0-9_,-]*$" }, "containerFeaturesDescription": { "type": "string", "maxLength": 1000, "pattern": "^[A-Za-z0-9_, -]*$" } }, "additionalProperties": false }, "image": { "type": "object", "properties": { "format": { "type": "string", "enum": [ "aki", "ami", "ari", "iso", "qcow2", "raw", "vdi", "vhd", "vmdk" ], "default": "qcow2" }, "providedBy": { "type": "string", "enum": [ "OPENECOMP", "Vendor" ], "default": "OPENECOMP" }, "bootDiskSizePerVM": { "type": "number", "maximum": 100 }, "ephemeralDiskSizePerVM": { "type": "number", "maximum": 400 } }, "additionalProperties": false }, "recovery": { "type": "object", "properties": { "pointObjective": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 15, "exclusiveMaximum ": true }, "timeObjective": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 300, "exclusiveMaximum ": true }, "vmProcessFailuresHandling": { "type": "string" } }, "additionalProperties": false }, "dnsConfiguration": { "type": "string" }, "vmCloneUsage": { "type": "string", "maximum": 300 } }, "additionalProperties": false }, "compute": { "type": "object", "properties": { "vmSizing": { "type": "object", "properties": { "numOfCPUs": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 16, "default": 2 }, "fileSystemSizeGB": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "default": 5 }, "persistentStorageVolumeSize": { "type": "number", "minimum": 0, "exclusiveMinimum": true }, "IOOperationsPerSec": { "type": "number", "minimum": 0, "exclusiveMinimum": true } }, "additionalProperties": false }, "numOfVMs": { "type": "object", "properties": { "minimum": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 100 }, "maximum": { "type": "number", "minimum": <#if (componentQuestionnaireData.compute.numOfVMs.minimum)?? && (componentQuestionnaireData.compute.numOfVMs.minimum)?is_number && ((componentQuestionnaireData.compute.numOfVMs.minimum) > 0 && (componentQuestionnaireData.compute.numOfVMs.minimum) <= 100)> ${componentQuestionnaireData.compute.numOfVMs.minimum}<#else> 0</#if>, "exclusiveMinimum": true, "maximum": 100 }, "CpuOverSubscriptionRatio": { "type": "string", "enum": [ "1:1", "4:1", "16:1" ], "default": "4:1" }, "MemoryRAM": { "type": "string", "enum": [ "2 GB", "4 GB", "8 GB" ], "default": "2 GB" } }, "additionalProperties": false }, "guestOS": { "type": "object", "properties": { "name": { "type": "string", "maxLength": 50 }, "bitSize": { "type": "number", "enum": [ 64, 32 ], "default": 64 }, "tools": { "type": "string" } }, "additionalProperties": false } }, "additionalProperties": false }, "highAvailabilityAndLoadBalancing": { "type": "object", "properties": { "failureLoadDistribution": { "type": "string", "maxLength": 1000 }, "nkModelImplementation": { "type": "string", "maxLength": 1000 }, "architectureChoice": { "type": "string", "maxLength": 1000 }, "slaRequirements": { "type": "string", "maxLength": 1000 }, "horizontalScaling": { "type": "string", "maxLength": 1000 }, "loadDistributionMechanism": { "type": "string", "maxLength": 1000 } }, "additionalProperties": false }, "network": { "type": "object", "properties": { "networkCapacity": { "type": "object", "properties": { "protocolWithHighestTrafficProfileAcrossAllNICs": { "type": "string", "enum": [ "TCP", "UDP", "SCTP", "IPsec" ] }, "networkTransactionsPerSecond": { "type": "number" } }, "additionalProperties": false } }, "additionalProperties": false }, "storage": { "type": "object", "properties": { "backup": { "type": "object", "properties": { "backupType": { "type": "string", "enum": [ "On Site", "Off Site" ], "default": "On Site" }, "backupStorageSize": { "type": "number" }, "backupSolution": { "type": "string" }, "backupNIC": { "type": "string", "enum": [<#if nicNames??><#list nicNames as nicName> "${nicName}"<#sep>,</#list></#if> ] } }, "additionalProperties": false }, "snapshotBackup": { "type": "object", "properties": { "snapshotFrequency": { "type": "number", "default": 24, "minimum": 1, "exclusiveMinimum": true } }, "additionalProperties": false }, "logBackup": { "type": "object", "properties": { "sizeOfLogFiles": { "type": "number", "maximum": 5, "exclusiveMaximum": true }, "logBackupFrequency": { "type": "number", "maximum": 4, "exclusiveMaximum": true }, "logRetentionPeriod": { "type": "number", "maximum": 15, "exclusiveMaximum": true }, "logFileLocation": { "type": "string", "maxLength": 300 } }, "additionalProperties": false } }, "additionalProperties": false } }, "additionalProperties": false }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.nic', '{ "$schema": "http://json-schema.org/draft-04/schema#", "definitions": { "protocol": { "type": "string", "enum": [ "TCP", "UDP", "SCTP", "IPsec" ] } }, "type": "object", "properties": { "protocols": { "type": "object", "properties": { "protocols": { "type": "array", "items": { "$ref": "#/definitions/protocol" }, "minItems": 1 }, "protocolWithHighestTrafficProfile": { "$ref": "#/definitions/protocol" } }, "additionalProperties": false }, "ipConfiguration": { "type": "object", "properties": { "ipv4Required": { "type": "boolean", "default": true }, "ipv6Required": { "type": "boolean", "default": false } }, "additionalProperties": false }, "network": { "type": "object", "properties": { "networkDescription": { "type": "string", "pattern": "[A-Za-z]+", "maxLength": 300 } }, "additionalProperties": false }, "sizing": { "type": "object", "definitions": { "peakAndAvg": { "type": "object", "properties": { "peak": { "type": "number" }, "avg": { "type": "number" } }, "additionalProperties": false }, "packetsAndBytes": { "type": "object", "properties": { "packets": { "$ref": "#/properties/sizing/definitions/peakAndAvg" }, "bytes": { "$ref": "#/properties/sizing/definitions/peakAndAvg" } }, "additionalProperties": false } }, "properties": { "describeQualityOfService": { "type": "string" }, "inflowTrafficPerSecond": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "outflowTrafficPerSecond": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "flowLength": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "acceptableJitter": { "type": "object", "properties": { "mean": { "type": "number" }, "max": { "type": "number" }, "variable": { "type": "number" } }, "additionalProperties": false }, "acceptablePacketLoss": { "type": "number", "minimum": 0, "maximum": 100 } }, "additionalProperties": false } }, "additionalProperties": false }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.vsp', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "general": { "type": "object", "properties": { "affinityData": { "type": "string", "enum": [ "Affinity", "Anti Affinity", "None" ] }, "availability": { "type": "object", "properties": { "useAvailabilityZonesForHighAvailability": { "type": "boolean", "default": false } }, "additionalProperties": false }, "regionsData": { "type": "object", "properties": { "multiRegion": { "type": "boolean", "default": false }, "regions": { "type": "array", "items": { "type": "string", "enum": [ "Alphareta", "Birmingham", "Dallas", "Fairfield CA", "Hayward CA", "Lisle", "Mission", "San Diego", "Secaucus" ] } } }, "additionalProperties": false }, "storageDataReplication": { "type": "object", "properties": { "storageReplicationAcrossRegion": { "type": "boolean", "default": false }, "storageReplicationSize": { "type": "number", "maximum": 100, "exclusiveMaximum": true }, "storageReplicationFrequency": { "type": "number", "minimum": 5 }, "storageReplicationSource": { "type": "string", "maxLength": 300 }, "storageReplicationDestination": { "type": "string", "maxLength": 300 } }, "additionalProperties": false } }, "additionalProperties": false } }, "additionalProperties": false }');
+INSERT INTO application_config (namespace,key,value) VALUES ('vsp.monitoring', 'component.ceilometer', '{ "ceilometerInfoList": [ { "name": "instance", "type": "Gauge", "unit": "instance", "category": "compute", "description": "Existence of instance" }, { "name": "instance:type", "type": "Gauge", "unit": "instance", "category": "compute", "description": "Existence of instance <type> (OpenStack types)" }, { "name": "memory", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM allocated to the instance" }, { "name": "memory.usage", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM used by the instance from the amount of its allocated memory" }, { "name": "memory.resident", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM used by the instance on the physical machine" }, { "name": "cpu", "type": "Cumulative", "unit": "ns", "category": "compute", "description": "CPU time used" }, { "name": "cpu_util", "type": "Gauge", "unit": "%", "category": "compute", "description": "Average CPU utilization" }, { "name": "cpu.delta", "type": "Delta", "unit": "ns", "category": "compute", "description": "CPU time used since previous datapoint" }, { "name": "vcpus", "type": "Gauge", "unit": "ms", "category": "compute", "description": "Average disk latency" } ] }');
+ALTER TABLE vsp_information ADD questionnaire_data text;
+ALTER TABLE vsp_information ADD vlm_version frozen<version>;
+ALTER TABLE entitlement_pool ADD version_uuid text;
+ALTER TABLE license_key_group ADD version_uuid text;
+
+EOF
+
+chmod 777 /tmp/create_dox_db.cql
+cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP -f /tmp/create_dox_db.cql > /dev/null 2>&1
+
+res=`echo "select keyspace_name from system.schema_keyspaces ;" | cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP |grep -c dox 2>/dev/null`
+
+if [ $res -eq 1 ]; then
+ echo "`date` --- dox keyspace was created "
+else
+ echo "`date` --- Failed to create dox keyspace"
+fi
+
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb
new file mode 100644
index 0000000..79d11f4
--- /dev/null
+++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb
@@ -0,0 +1,11 @@
+discovery.zen.ping.multicast.enabled: false
+discovery.zen.ping.unicast.enabled: true
+node.name: asdc-01
+cluster.name: elasticsearch
+node.master: false
+node.data: false
+http.cors.enabled: true
+path.home: "/var/lib/jetty/config"
+elasticSearch.transportclient: true
+transport.client.initial_nodes:
+ - <%= @elastic_ip %>:9300