demo-k8s.sh - onap/testsuite/oom - Gitiles

 #!/bin/bash
 # Copyright (C) 2018 Amdocs, Bell Canada
 # Modifications Copyright (C) 2019 Samsung
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 # Execute tags built to support the hands-on demo
 #
 function usage
 {
 	echo "Usage: demo-k8s.sh <namespace> <command> [<parameters>] [execscript]"
 	echo " "
 	echo "       demo-k8s.sh <namespace> init"
 	echo "               - Execute both init_customer + distribute"
 	echo " "
 	echo "       demo-k8s.sh <namespace> init_customer"
 	echo "               - Create demo customer (Demonstration) and services, etc."
 	echo " "
 	echo "       demo-k8s.sh <namespace> distribute  [<prefix>]"
 	echo "               - Distribute demo models (demoVFW and demoVLB)"
 	echo " "
 	echo "       demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
 	echo "               - Preload data for VNF for the <module_name>"
 	echo " "
 	echo "       demo-k8s.sh <namespace> appc <module_name>"
 	echo "               - provide APPC with vFW module mount point for closed loop"
 	echo " "
 	echo "       demo-k8s.sh <namespace> init_robot [ <etc_hosts_prefix> ]"
 	echo "               - Initialize robot after all ONAP VMs have started"
 	echo " "
 	echo "       demo-k8s.sh <namespace> instantiateVFW"
 	echo "               - Instantiate vFW module for the demo customer (DemoCust<uuid>)"
 	echo " "
 	echo "       demo-k8s.sh <namespace> instantiateVFWdirectso  csar_filename"
 	echo "               - Instantiate vFW module using direct SO interface using previously distributed model "
         echo "                 that is in /tmp/csar in robot container"
 	echo " "
 	echo "       demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
 	echo "               - Delete the module created by instantiateVFW"
 	echo " "
 	echo "       demo-k8s.sh <namespace> heatbridge <stack_name> <service_instance_id> <service> <oam-ip-address>"
 	echo "               - Run heatbridge against the stack for the given service instance and service"
 	echo " "
 	echo "       demo-k8s.sh <namespace> vfwclosedloop <pgn-ip-address>"
         echo "               - vFWCL: Sets the packet generator to high and low rates, and checks whether the policy "
         echo "                 kicks in to modulate the rates back to medium"
 	echo " "
 	echo "       demo-k8s.sh <namespace> <command> [<parameters>] execscript
 	echo "               - Optional parameter to execute user custom scripts located in scripts/demoscript directory"
 	echo " "
 }

 # Check if execscript flag is used and drop it from input arguments

 if [[ "${!#}" == "execscript" ]]; then
         set -- "${@:1:$#-1}"
         execscript=true
 fi

 # Set the defaults

 echo "Number of parameters:"
 echo $#

 if [ $# -lt 2 ];then
 	usage
 	exit
 fi

 NAMESPACE=$1
 shift

 ##
 ## if more than 1 tag is supplied, the must be provided with -i or -e
 ##
 while [ $# -gt 0 ]
 do
 	key="$1"
         echo "KEY:"
         echo $key

 	case $key in
     	init_robot)
 			TAG="UpdateWebPage"
 			read -s -p "WEB Site Password for user 'test': " WEB_PASSWORD
 			if [ "$WEB_PASSWORD" = "" ]; then
 				echo ""
 				echo "WEB Password is required for user 'test'"
 				exit
 			fi
 			VARIABLES="$VARIABLES -v WEB_PASSWORD:$WEB_PASSWORD"
 			shift
 			if [ $# -eq 2 ];then
 				VARIABLES="$VARIABLES -v HOSTS_PREFIX:$1"
 			fi
 			shift
 			;;
     	init)
 			TAG="InitDemo"
 			shift
 			;;
     	init_customer)
 			TAG="InitCustomer"
 			shift
 			;;
     	distribute)
 			TAG="InitDistribution"
 			shift
 			if [ $# -eq 1 ];then
 				VARIABLES="$VARIABLES -v DEMO_PREFIX:$1"
 			fi
 			shift
 			;;
     	preload)
 			TAG="PreloadDemo"
 			shift
 			if [ $# -ne 2 ];then
 				echo "Usage: demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
 				exit
 			fi
 			VARIABLES="$VARIABLES -v VNF_NAME:$1"
 			shift
 			VARIABLES="$VARIABLES -v MODULE_NAME:$1"
 			shift
 			;;
     	appc)
 			TAG="APPCMountPointDemo"
 			shift
 			if [ $# -ne 1 ];then
 					echo "Usage: demo-k8s.sh <namespace> appc <module_name>"
 					exit
 				fi
 			VARIABLES="$VARIABLES -v MODULE_NAME:$1"
 			shift
 			;;
     	instantiateVFW)
 			TAG="instantiateVFW"
 			VARIABLES="$VARIABLES -v GLOBAL_BUILD_NUMBER:$$"
 			shift
 			;;
         instantiateVFWdirectso)
                         TAG="instantiateVFWdirectso"
                         shift
                         if [ $# -ne 1 ];then
                                         echo "Usage: demo-k8s.sh <namespace> instantiateVFWdirectso <csar_filename>"
                                         exit
                                 fi
                         VARIABLES="$VARIABLES -v CSAR_FILE:$1 -v GLOBAL_BUILD_NUMBER:$$"
                         shift
                         ;;
     	deleteVNF)
 			TAG="deleteVNF"
 			shift
 			if [ $# -ne 1 ];then
 				echo "Usage: demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
 				exit
 			fi
 			VARFILE=$1.py
 			if [ -e /opt/eteshare/${VARFILE} ]; then
 				VARIABLES="$VARIABLES -V /share/${VARFILE}"
 			else
 				echo "Cache file ${VARFILE} is not found"
 				exit
 			fi
 			shift
 			;;
     	heatbridge)
 			TAG="heatbridge"
 			shift
 			if [ $# -ne 4 ];then
 				echo "Usage: demo-k8s.sh <namespace> heatbridge <stack_name> <service_instance_id> <service> <oam-ip-address>"
 				exit
 			fi
 			VARIABLES="$VARIABLES -v HB_STACK:$1"
 			shift
 			VARIABLES="$VARIABLES -v HB_SERVICE_INSTANCE_ID:$1"
 			shift
 			VARIABLES="$VARIABLES -v HB_SERVICE:$1"
 			shift
 			VARIABLES="$VARIABLES -v HB_IPV4_OAM_ADDRESS:$1"
 			shift
 			;;
     	cds)
 			TAG="cds"
 			shift
 			;;
         distributeVFWNG)
                         TAG="distributeVFWNG"
                         shift
                         ;;
         distributeDemoVFWDT)
                         TAG="DistributeDemoVFWDT"
                         shift
                         ;;
         instantiateDemoVFWDT)
                         TAG="instantiateVFWDT"
                         shift
                         ;;
         vfwclosedloop)
                         TAG="vfwclosedloop"
                         shift
                         VARIABLES="$VARIABLES -v PACKET_GENERATOR_HOST:$1 -v pkg_host:$1"
                         shift
                         ;;
     	*)
 			usage
 			exit
 	esac
 done

 set -x

 POD=$(kubectl --namespace $NAMESPACE get pods | sed 's/ .*//'| grep robot)

 DIR=$(dirname "$0")
 SCRIPTDIR=scripts/demoscript

 ETEHOME=/var/opt/ONAP

 if [ $execscript ]; then
    for script in $(ls -1 "$DIR/$SCRIPTDIR"); do
       [ -f "$DIR/$SCRIPTDIR/$script" ] && [ -x "$DIR/$SCRIPTDIR/$script" ] && source "$DIR/$SCRIPTDIR/$script"
    done
 fi

 export GLOBAL_BUILD_NUMBER=$(kubectl --namespace $NAMESPACE exec  ${POD}  -- bash -c "ls -1q /share/logs/ | wc -l")
 OUTPUT_FOLDER=$(printf %04d $GLOBAL_BUILD_NUMBER)_demo_$key
 DISPLAY_NUM=$(($GLOBAL_BUILD_NUMBER + 90))

 VARIABLEFILES="-V /share/config/robot_properties.py"

 kubectl --namespace $NAMESPACE exec ${POD} -- ${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} -i ${TAG} --display $DISPLAY_NUM 2> ${TAG}.out
	#!/bin/bash
	# Copyright (C) 2018 Amdocs, Bell Canada
	# Modifications Copyright (C) 2019 Samsung
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# Execute tags built to support the hands-on demo
	#
	function usage
	{
	echo "Usage: demo-k8s.sh <namespace> <command> [<parameters>] [execscript]"
	echo " "
	echo " demo-k8s.sh <namespace> init"
	echo " - Execute both init_customer + distribute"
	echo " "
	echo " demo-k8s.sh <namespace> init_customer"
	echo " - Create demo customer (Demonstration) and services, etc."
	echo " "
	echo " demo-k8s.sh <namespace> distribute [<prefix>]"
	echo " - Distribute demo models (demoVFW and demoVLB)"
	echo " "
	echo " demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
	echo " - Preload data for VNF for the <module_name>"
	echo " "
	echo " demo-k8s.sh <namespace> appc <module_name>"
	echo " - provide APPC with vFW module mount point for closed loop"
	echo " "
	echo " demo-k8s.sh <namespace> init_robot [ <etc_hosts_prefix> ]"
	echo " - Initialize robot after all ONAP VMs have started"
	echo " "
	echo " demo-k8s.sh <namespace> instantiateVFW"
	echo " - Instantiate vFW module for the demo customer (DemoCust<uuid>)"
	echo " "
	echo " demo-k8s.sh <namespace> instantiateVFWdirectso csar_filename"
	echo " - Instantiate vFW module using direct SO interface using previously distributed model "
	echo " that is in /tmp/csar in robot container"
	echo " "
	echo " demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
	echo " - Delete the module created by instantiateVFW"
	echo " "
	echo " demo-k8s.sh <namespace> heatbridge <stack_name> <service_instance_id> <service> <oam-ip-address>"
	echo " - Run heatbridge against the stack for the given service instance and service"
	echo " "
	echo " demo-k8s.sh <namespace> vfwclosedloop <pgn-ip-address>"
	echo " - vFWCL: Sets the packet generator to high and low rates, and checks whether the policy "
	echo " kicks in to modulate the rates back to medium"
	echo " "
	echo " demo-k8s.sh <namespace> <command> [<parameters>] execscript
	echo " - Optional parameter to execute user custom scripts located in scripts/demoscript directory"
	echo " "
	}

	# Check if execscript flag is used and drop it from input arguments

	if [[ "${!#}" == "execscript" ]]; then
	set -- "${@:1:$#-1}"
	execscript=true
	fi

	# Set the defaults

	echo "Number of parameters:"
	echo $#

	if [ $# -lt 2 ];then
	usage
	exit
	fi

	NAMESPACE=$1
	shift

	##
	## if more than 1 tag is supplied, the must be provided with -i or -e
	##
	while [ $# -gt 0 ]
	do
	key="$1"
	echo "KEY:"
	echo $key

	case $key in
	init_robot)
	TAG="UpdateWebPage"
	read -s -p "WEB Site Password for user 'test': " WEB_PASSWORD
	if [ "$WEB_PASSWORD" = "" ]; then
	echo ""
	echo "WEB Password is required for user 'test'"
	exit
	fi
	VARIABLES="$VARIABLES -v WEB_PASSWORD:$WEB_PASSWORD"
	shift
	if [ $# -eq 2 ];then
	VARIABLES="$VARIABLES -v HOSTS_PREFIX:$1"
	fi
	shift
	;;
	init)
	TAG="InitDemo"
	shift
	;;
	init_customer)
	TAG="InitCustomer"
	shift
	;;
	distribute)
	TAG="InitDistribution"
	shift
	if [ $# -eq 1 ];then
	VARIABLES="$VARIABLES -v DEMO_PREFIX:$1"
	fi
	shift
	;;
	preload)
	TAG="PreloadDemo"
	shift
	if [ $# -ne 2 ];then
	echo "Usage: demo-k8s.sh <namespace> preload <vnf_name> <module_name>"
	exit
	fi
	VARIABLES="$VARIABLES -v VNF_NAME:$1"
	shift
	VARIABLES="$VARIABLES -v MODULE_NAME:$1"
	shift
	;;
	appc)
	TAG="APPCMountPointDemo"
	shift
	if [ $# -ne 1 ];then
	echo "Usage: demo-k8s.sh <namespace> appc <module_name>"
	exit
	fi
	VARIABLES="$VARIABLES -v MODULE_NAME:$1"
	shift
	;;
	instantiateVFW)
	TAG="instantiateVFW"
	VARIABLES="$VARIABLES -v GLOBAL_BUILD_NUMBER:$$"
	shift
	;;
	instantiateVFWdirectso)
	TAG="instantiateVFWdirectso"
	shift
	if [ $# -ne 1 ];then
	echo "Usage: demo-k8s.sh <namespace> instantiateVFWdirectso <csar_filename>"
	exit
	fi
	VARIABLES="$VARIABLES -v CSAR_FILE:$1 -v GLOBAL_BUILD_NUMBER:$$"
	shift
	;;
	deleteVNF)
	TAG="deleteVNF"
	shift
	if [ $# -ne 1 ];then
	echo "Usage: demo-k8s.sh <namespace> deleteVNF <module_name from instantiateVFW>"
	exit
	fi
	VARFILE=$1.py
	if [ -e /opt/eteshare/${VARFILE} ]; then
	VARIABLES="$VARIABLES -V /share/${VARFILE}"
	else
	echo "Cache file ${VARFILE} is not found"
	exit
	fi
	shift
	;;
	heatbridge)
	TAG="heatbridge"
	shift
	if [ $# -ne 4 ];then
	echo "Usage: demo-k8s.sh <namespace> heatbridge <stack_name> <service_instance_id> <service> <oam-ip-address>"
	exit
	fi
	VARIABLES="$VARIABLES -v HB_STACK:$1"
	shift
	VARIABLES="$VARIABLES -v HB_SERVICE_INSTANCE_ID:$1"
	shift
	VARIABLES="$VARIABLES -v HB_SERVICE:$1"
	shift
	VARIABLES="$VARIABLES -v HB_IPV4_OAM_ADDRESS:$1"
	shift
	;;
	cds)
	TAG="cds"
	shift
	;;
	distributeVFWNG)
	TAG="distributeVFWNG"
	shift
	;;
	distributeDemoVFWDT)
	TAG="DistributeDemoVFWDT"
	shift
	;;
	instantiateDemoVFWDT)
	TAG="instantiateVFWDT"
	shift
	;;
	vfwclosedloop)
	TAG="vfwclosedloop"
	shift
	VARIABLES="$VARIABLES -v PACKET_GENERATOR_HOST:$1 -v pkg_host:$1"
	shift
	;;
	*)
	usage
	exit
	esac
	done

	set -x

	POD=$(kubectl --namespace $NAMESPACE get pods \| sed 's/ .*//'\| grep robot)

	DIR=$(dirname "$0")
	SCRIPTDIR=scripts/demoscript

	ETEHOME=/var/opt/ONAP

	if [ $execscript ]; then
	for script in $(ls -1 "$DIR/$SCRIPTDIR"); do
	[ -f "$DIR/$SCRIPTDIR/$script" ] && [ -x "$DIR/$SCRIPTDIR/$script" ] && source "$DIR/$SCRIPTDIR/$script"
	done
	fi

	export GLOBAL_BUILD_NUMBER=$(kubectl --namespace $NAMESPACE exec ${POD} -- bash -c "ls -1q /share/logs/ \| wc -l")
	OUTPUT_FOLDER=$(printf %04d $GLOBAL_BUILD_NUMBER)_demo_$key
	DISPLAY_NUM=$(($GLOBAL_BUILD_NUMBER + 90))

	VARIABLEFILES="-V /share/config/robot_properties.py"

	kubectl --namespace $NAMESPACE exec ${POD} -- ${ETEHOME}/runTags.sh ${VARIABLEFILES} ${VARIABLES} -d /share/logs/${OUTPUT_FOLDER} -i ${TAG} --display $DISPLAY_NUM 2> ${TAG}.out