| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| |
| # This is a script that contains specific test functions for ECS NB/SB API |
| |
| . ../common/api_curl.sh |
| |
| ############### EXPERIMENTAL ############# |
| |
| ########################################## |
| ###### Mainly only function skeletons #### |
| ########################################## |
| |
| ########################################## |
| ### A1-E Enrichment Data Consumer API #### |
| ########################################## |
| #Function prefix: ecs_api_a1 |
| |
| # API Test function: GET /A1-EI/v1/eitypes/{eiTypeId}/eijobs |
| # args: <response-code> <type-id> <owner-id>|NOOWNER [ EMPTY | <job-id>+ ] |
| # (Function for test scripts) |
| ecs_api_a1_get_job_ids() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| # Valid number of parameters 3,4,5,6 etc |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> <type-id> <owner-id>|NOOWNER [ EMPTY | <job-id>+ ]" $@ |
| return 1 |
| fi |
| owner="" |
| if [ $3 != "NOWNER" ]; then |
| owner="?owner="$3 |
| fi |
| |
| query="/A1-EI/v1/eitypes/$2/eijobs$owner" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -gt 3 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| |
| for pid in ${@:4} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ $pid != "EMPTY" ]; then |
| targetJson=$targetJson"\"$pid\"" |
| fi |
| done |
| |
| targetJson=$targetJson"]" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /A1-EI/v1/eitypes/{eiTypeId} |
| # args: <response-code> <type-id> [<schema-file>] |
| # (Function for test scripts) |
| ecs_api_a1_get_type() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <type-id> [<schema-file>]" $@ |
| return 1 |
| fi |
| |
| query="/A1-EI/v1/eitypes/$2" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -eq 3 ]; then |
| body=${res:0:${#res}-3} |
| if [ -f $3 ]; then |
| schema=$(cat $3) |
| else |
| echo -e $RED" FAIL. Schema file "$3", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| targetJson="{\"eiJobParametersSchema\":$schema}" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /A1-EI/v1/eitypes |
| # args: <response-code> [ (EMPTY | [<type-id>]+) ] |
| # (Function for test scripts) |
| ecs_api_a1_get_type_ids() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [ (EMPTY | [<type-id>]+) ]" $@ |
| return 1 |
| fi |
| |
| query="/A1-EI/v1/eitypes" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| if [ $# -gt 1 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| if [ $2 != "EMPTY" ]; then |
| for pid in ${@:2} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"\"$pid\"" |
| done |
| fi |
| targetJson=$targetJson"]" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}/status |
| # args: <response-code> <type-id> <job-id> [<status>] |
| # (Function for test scripts) |
| ecs_api_a1_get_job_status() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -ne 3 ] && [ $# -ne 4 ]; then |
| __print_err "<response-code> <type-id> <job-id>" $@ |
| return 1 |
| fi |
| |
| query="/A1-EI/v1/eitypes/$2/eijobs/$3/status" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| if [ $# -eq 4 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="{\"operationalState\": \"$4\"}" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId} |
| # args: <response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>] |
| # (Function for test scripts) |
| ecs_api_a1_get_job() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -ne 3 ] && [ $# -ne 6 ]; then |
| __print_err "<response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]" $@ |
| return 1 |
| fi |
| |
| query="/A1-EI/v1/eitypes/$2/eijobs/$3" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -eq 6 ]; then |
| body=${res:0:${#res}-3} |
| |
| if [ -f $6 ]; then |
| jobfile=$(cat $6) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g") |
| else |
| echo -e $RED" FAIL. Job template file "$6", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| targetJson="{\"targetUri\": \"$4\",\"jobOwner\": \"$5\",\"jobParameters\": $jobfile}" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: DELETE /A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId} |
| # args: <response-code> <type-id> <job-id> |
| # (Function for test scripts) |
| ecs_api_a1_delete_job() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 3 ]; then |
| __print_err "<response-code> <type-id> <job-id>" $@ |
| return 1 |
| fi |
| |
| query="/A1-EI/v1/eitypes/$2/eijobs/$3" |
| res="$(__do_curl_to_api ECS DELETE $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: PUT /A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId} |
| # args: <response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file> |
| # (Function for test scripts) |
| ecs_api_a1_put_job() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 6 ]; then |
| __print_err "<response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file>" $@ |
| return 1 |
| fi |
| if [ -f $6 ]; then |
| jobfile=$(cat $6) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/$3/g") |
| else |
| echo -e $RED" FAIL. Job template file "$6", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| inputJson="{\"targetUri\": \"$4\",\"jobOwner\": \"$5\",\"jobParameters\": $jobfile}" |
| file="./tmp/.p.json" |
| echo "$inputJson" > $file |
| |
| query="/A1-EI/v1/eitypes/$2/eijobs/$3" |
| res="$(__do_curl_to_api ECS PUT $query $file)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| |
| ########################################## |
| #### Enrichment Data Producer API #### |
| ########################################## |
| # Function prefix: ecs_api_edp |
| |
| # API Test function: GET /ei-producer/v1/eitypes |
| # args: <response-code> [ EMPTY | <type-id>+] |
| # (Function for test scripts) |
| ecs_api_edp_get_type_ids() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [ EMPTY | <type-id>+]" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eitypes" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -gt 1 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| if [ $2 != "EMPTY" ]; then |
| for pid in ${@:2} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"\"$pid\"" |
| done |
| fi |
| targetJson=$targetJson"]" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}/status |
| # args: <response-code> <producer-id> [<status>] |
| # (Function for test scripts) |
| ecs_api_edp_get_producer_status() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <producer-id> [<status>]" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eiproducers/$2/status" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| if [ $# -eq 3 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="{\"operational_state\": \"$3\"}" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| |
| # API Test function: GET /ei-producer/v1/eiproducers |
| # args: <response-code> [ EMPTY | <producer-id>+] |
| # (Function for test scripts) |
| ecs_api_edp_get_producer_ids() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [ EMPTY | <producer-id>+]" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eiproducers" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -gt 1 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| |
| for pid in ${@:2} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ $pid != "EMPTY" ]; then |
| targetJson=$targetJson"\"$pid\"" |
| fi |
| done |
| |
| targetJson=$targetJson"]" |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /ei-producer/v1/eitypes/{eiTypeId} |
| # args: <response-code> <type-id> [<job-schema-file> (EMPTY | [<producer-id>]+)] |
| # (Function for test scripts) |
| ecs_api_edp_get_type() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| paramError=1 |
| if [ $# -eq 2 ]; then |
| paramError=0 |
| fi |
| if [ $# -gt 3 ]; then |
| paramError=0 |
| fi |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> <type-id> [<job-schema-file> 'EMPTY' | ([<producer-id>]+)]" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eitypes/$2" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| if [ $# -gt 3 ]; then |
| body=${res:0:${#res}-3} |
| |
| if [ -f $3 ]; then |
| schema=$(cat $3) |
| else |
| echo -e $RED" FAIL. Job template file "$3", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| targetJson="" |
| if [ $4 != "EMPTY" ]; then |
| for pid in ${@:4} ; do |
| if [ "$targetJson" != "" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"\"$pid\"" |
| done |
| fi |
| targetJson="{\"ei_job_data_schema\":$schema, \"ei_producer_ids\": [$targetJson]}" |
| |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId} |
| # args: <response-code> <producer-id> [<create-callback> <delete-callback> <supervision-callback> (EMPTY | [<type-id> <schema-file>]+) ] |
| # (Function for test scripts) |
| ecs_api_edp_get_producer() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| #Possible arg count: 2, 6 7, 9, 11 etc |
| paramError=1 |
| if [ $# -eq 2 ]; then |
| paramError=0 |
| fi |
| if [ $# -eq 6 ] && [ "$6" == "EMPTY" ]; then |
| paramError=0 |
| fi |
| variablecount=$(($#-5)) |
| if [ $# -gt 5 ] && [ $(($variablecount%2)) -eq 0 ]; then |
| paramError=0 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> <producer-id> [<create-callback> <delete-callback> <supervision-callback> (NOID | [<type-id> <schema-file>]+) ]" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eiproducers/$2" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| if [ $# -gt 2 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| if [ $# -gt 6 ]; then |
| arr=(${@:6}) |
| for ((i=0; i<$(($#-6)); i=i+2)); do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ -f ${arr[$i+1]} ]; then |
| schema=$(cat ${arr[$i+1]}) |
| else |
| echo -e $RED" FAIL. Schema file "${arr[$i+1]}", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| targetJson=$targetJson"{\"ei_type_identity\":\"${arr[$i]}\",\"ei_job_data_schema\":$schema}" |
| done |
| fi |
| targetJson=$targetJson"]" |
| if [ $# -gt 4 ]; then |
| targetJson="{\"supported_ei_types\":$targetJson,\"ei_job_creation_callback_url\": \"$3\",\"ei_job_deletion_callback_url\": \"$4\",\"ei_producer_supervision_callback_url\": \"$5\"}" |
| fi |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: DELETE /ei-producer/v1/eiproducers/{eiProducerId} |
| # args: <response-code> <producer-id> |
| # (Function for test scripts) |
| ecs_api_edp_delete_producer() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 2 ]; then |
| __print_err "<response-code> <producer-id>" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eiproducers/$2" |
| res="$(__do_curl_to_api ECS DELETE $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: PUT /ei-producer/v1/eiproducers/{eiProducerId} |
| # args: <response-code> <producer-id> <create-callback> <delete-callback> <supervision-callback> NOTYPE|[<type-id> <schema-file>]+ |
| # (Function for test scripts) |
| ecs_api_edp_put_producer() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| #Valid number of parametrer 6,7,9,11, |
| paramError=1 |
| if [ $# -eq 6 ] && [ "$6" == "NOTYPE" ]; then |
| paramError=0 |
| elif [ $# -gt 6 ] && [ $(($#%2)) -eq 1 ]; then |
| paramError=0 |
| fi |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> <producer-id> <create-callback> <delete-callback> <supervision-callback> [<type-id> <schema-file>]+" $@ |
| return 1 |
| fi |
| |
| inputJson="[" |
| if [ $# -gt 6 ]; then |
| arr=(${@:6}) |
| for ((i=0; i<$(($#-6)); i=i+2)); do |
| if [ "$inputJson" != "[" ]; then |
| inputJson=$inputJson"," |
| fi |
| if [ -f ${arr[$i+1]} ]; then |
| schema=$(cat ${arr[$i+1]}) |
| else |
| echo -e $RED" FAIL. Schema file "${arr[$i+1]}", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| inputJson=$inputJson"{\"ei_type_identity\":\"${arr[$i]}\",\"ei_job_data_schema\":$schema}" |
| done |
| fi |
| inputJson="\"supported_ei_types\":"$inputJson"]" |
| |
| inputJson=$inputJson",\"ei_job_creation_callback_url\": \"$3\",\"ei_job_deletion_callback_url\": \"$4\",\"ei_producer_supervision_callback_url\": \"$5\"" |
| |
| inputJson="{"$inputJson"}" |
| |
| file="./tmp/.p.json" |
| echo "$inputJson" > $file |
| query="/ei-producer/v1/eiproducers/$2" |
| res="$(__do_curl_to_api ECS PUT $query $file)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| # API Test function: GET /ei-producer/v1/eiproducers/{eiProducerId}/eijobs |
| # args: <response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <template-job-file>]+) |
| # (Function for test scripts) |
| ecs_api_edp_get_producer_jobs() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| #Valid number of parameter 2,3,6,10 |
| paramError=1 |
| if [ $# -eq 2 ]; then |
| paramError=0 |
| fi |
| if [ $# -eq 3 ] && [ "$3" == "EMPTY" ]; then |
| paramError=0 |
| fi |
| variablecount=$(($#-2)) |
| if [ $# -gt 3 ] && [ $(($variablecount%4)) -eq 0 ]; then |
| paramError=0 |
| fi |
| if [ $paramError -eq 1 ]; then |
| __print_err "<response-code> <producer-id> (EMPTY | [<job-id> <type-id> <target-url> <template-job-file>]+)" $@ |
| return 1 |
| fi |
| |
| query="/ei-producer/v1/eiproducers/$2/eijobs" |
| res="$(__do_curl_to_api ECS GET $query)" |
| status=${res:${#res}-3} |
| if [ $status -ne $1 ]; then |
| echo -e $RED" FAIL. Exepected status "$1", got "$status $ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| if [ $# -gt 2 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| if [ $# -gt 3 ]; then |
| arr=(${@:3}) |
| for ((i=0; i<$(($#-3)); i=i+4)); do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ -f ${arr[$i+3]} ]; then |
| jobfile=$(cat ${arr[$i+3]}) |
| jobfile=$(echo "$jobfile" | sed "s/XXXX/${arr[$i]}/g") |
| else |
| echo -e $RED" FAIL. Job template file "${arr[$i+3]}", does not exist"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| targetJson=$targetJson"{\"ei_job_identity\":\"${arr[$i]}\",\"ei_type_identity\":\"${arr[$i+1]}\",\"target_uri\":\"${arr[$i+2]}\",\"ei_job_data\":$jobfile}" |
| done |
| fi |
| targetJson=$targetJson"]" |
| |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| echo -e $RED" FAIL, returned body not correct"$ERED |
| ((RES_FAIL++)) |
| __check_stop_at_error |
| return 1 |
| fi |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |
| |
| |
| ########################################## |
| #### Service status #### |
| ########################################## |
| # Function prefix: ecs_api_service |
| |
| # API Test function: GET /status |
| # args: <response-code> |
| # (Function for test scripts) |
| ecs_api_service_status() { |
| echo -e $BOLD"TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ $EBOLD |
| echo "TEST(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| ((RES_TEST++)) |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [<producer-id>]*|NOID" $@ |
| return 1 |
| fi |
| |
| ((RES_PASS++)) |
| echo -e $GREEN" PASS"$EGREEN |
| return 0 |
| } |