Introduction

This dir contains most scripts needed for the auto-test environment. There are scripts with functions to adapt to the apis of the components of the Non-RT RIC; Policy Agent, A1 Controller and Ric (A1) simulator. Some of the scripts can also be used for other kinds of tests, for example basic tests.

Overview for common test scripts and files

test_env*.sh
Common env variables for test in the auto-test dir. All configuration of port numbers, image names and version etc shall be made in this file. Used by the auto test scripts/suites but could be used for other test script as well. The test cases shall be started with the file for the intended target using command line argument '--env-file'. There are preconfigured env files, pattern 'test_env*.sh', in ../common.

testcase_common.sh
Common functions for auto test cases in the auto-test dir. This script is the foundation of test auto environment which sets up images and enviroment variables needed by this script as well as the script adapting to the APIs. The included functions are described in detail further below.

testsuite_common.sh
Common functions for running two or more auto test scripts as a suite.

api_curl.sh
A common curl based function for the agent and ecs apis. Also partly used for the Callback receiver api.

agent_api_functions.sh
Contains functions for adapting towards the Policy Agent API, also via dmaap (using a message-router stub interface)

ecs_api_functions.sh
Contains functions for adapting towards the ECS API

controller_api_functions.sh
Contains functions for adaping towards the A1-controller API.

ricsimulator_api_functions.sh
Contains functions for adapting towards the RIC (A1) simulator admin API.

prodstub_api_functions.sh
Contains functions for adapting towards the Producer stub interface - simulates a producer.

compare_json.py
A python script to compare two json obects for equality. Note that the comparsion always sort json-arrays before comparing (that is, it does not care about the order of items within the array). In addition, the target json object may specify individual parameter values where equality is 'dont care'.

count_json_elements.py
A python script returning the number of items in a json array.

create_policies_process.py
A python script to create a batch of policies. The script is intended to run in a number of processes to create policies in parallel.

create_rics_json.py
A python script to create a json file from a formatted string of ric info. Helper for the test enviroment.

delete_policies_process.py
A python script to delete a batch of policies. The script is intended to run in a number of processes to delete policies in parallel.

extract_sdnc_reply.py
A python script to extract the information from an sdnc (A1 Controller) reply json. Helper for the test environment.

do_curl_function.sh A script for executing a curl call with a specific url and optional payload. It also compare the response with an expected result in terms of response code and optional returned payload. Intended to be used by test script (for example basic test scripts of other components)

cr_api_functions.sh
Contains functions for adapting towards the Callback receiver for checking received callback event.

Description of functions in testcase_common.sh

Script args

The script can be started with these arguments

arg list
`local
parameterdescription
localonly locally built images (in local docker respository) will be used for the Non-RT RIC components. CBS, Consul, DB will still use remote nexus images
remoteonly remote images from nexus will be used. Images pulled if not present in local docker repository
remote-removesame as remote but all images are removed first so that fresh images are pulled when running
auto-cleanall containers will be automatically stopped and removed when the test case is complete. Requires the function 'auto_clean_containers' to be included last in the applicable auto-test script
--stop-at-errorintended for debugging and make the script stop at first 'FAIL' and save all logs with a prefix 'STOP_AT_ERROR'
--ricsim-prefix <prefix>use another prefix for the ric simulator container name than the standard 'ricsim'. Note that the testscript has to read and use the env var $RIC_SIM_PREFIX instead of a hardcoded name of the ric(s).
--env-filepoint to a file with environment variables (the previous default, test_env.sh, replaced with one env file for each branch in test/common)
--use-local-image <app-nam> [<app-name>]*nnly applicable when running as 'remote' or 'remote-remove'. Mainly for debugging when a locally built image shall be used together with other remote images from nexus.Accepts a space separated list of PA, CP, RICSIM, SDNC for Policy Agent, Control Panel, A1-controller and the Ric simulator

Function: print_result

Print a test report of an auto-test script. | arg list | |--| | None |

Function: start_timer

Start a timer for time measurement. Only one timer can be running. | arg list | |--| | None - but any args will be printed (It is good practice to use same args for this function as for the print_timer) |

Function: print_timer

Print the value of the timer (in seconds) previously started by 'start_timer'. (Note that timer is still running after this function). The result of the timer as well as the args to the function will also be printed in the test report. | arg list | |--| | <timer-message-to-print> |

parameterdescription
<timer-message-to-print>Any text message to be printed along with the timer result.(It is good practice to use same args for this function as for the start_timer)

Function: print_and_reset_timer

Print the value of the timer (in seconds) previously started by 'start_timer'. Also reset the timer to 0. The result of the timer as well as the args to the function will also be printed in the test report. | arg list | |--| | <timer-message-to-print> |

parameterdescription
<timer-message-to-print>Any text message to be printed along with the timer result.(It is good practice to use same args for this function as for the start_timer)

Function: deviation

Mark a test as a deviation from the requirements. The list of deviations will be printed in the test report. | arg list | |--| | <deviation-message-to-print> |

parameterdescription
<deviation-message-to-print>Any text message describing the deviation. The text will also be printed in the test report. The intention is to mark known deviations, compared to required functionality

Function: clean_containers

Stop and remove all containers. Containers not part of the test are not affected. | arg list | |--| | None |

Function: auto_clean_containers

Stop and remove all containers. Containers not part of the test are not affected. This function has effect only if the test script is started with arg auto-clean. This intention is to use this function as the last step in an auto-test script. | arg list | |--| | None |

Function: sleep_wait

Make the script sleep for a number of seconds. | arg list | |--| | <sleep-time-in-sec> [<any-text-in-quotes-to-be-printed>] |

parameterdescription
<sleep-time-in-sec> Number of seconds to sleep
<any-text-in-quotes-to-be-printed>Optional. The text will be printed, if present

Function: generate_uuid

Geneate a UUID prefix to use along with the policy instance number when creating/deleting policies. Sets the env var UUID. UUID is then automatically added to the policy id in GET/PUT/DELETE. | arg list | |--| | None |

Function: consul_config_app

Function to load a json config from a file into consul for the Policy Agent

arg list
<json-config-file>
parameterdescription
<json-config-file>The path to the json file to be loaded to Consul/CBS

Function: prepare_consul_config

Function to prepare a Consul config based on the previously configured (and started simulators). Note that all simulator must be running and the test script has to configure if http or https shall be used for the components (this is done by the functions 'use_simulator_http', 'use_simulator_https', 'use_sdnc_http', 'use_sdnc_https', 'use_mr_http', 'use_mr_https') | arg list | |--| | <deviation-message-to-print> |

parameterdescription
`SDNCNOSDNC`
<output-file>The path to the json output file containing the prepared config. This file is used in 'consul_config_app'

Function: start_consul_cbs

Start the Consul and CBS containers | arg list | |--| | None |

Function: use_simulator_http

Use http for all API calls (A1) toward the simulator. This is the default. Admin API calls to the simulator are not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_simulator_https

Use https for all API calls (A1) toward the simulator. Admin API calls to the simulator are not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: start_ric_simulators

Start a group of simulator where a group may contain 1 more simulators. | arg list | |--| | ricsim_g1|ricsim_g2|ricsim_g3 <count> <interface-id> |

parameterdescription
`ricsim_g1ricsim_g2
<count>And integer, 1 or greater. Specifies the number of simulators to start
<interface-id>Shall be the interface id of the simulator. See the repo 'a1-interface' for the available ids.

Function: start_control_panel

Start the Control Panel container | arg list | |--| | None |

Function: start_sdnc

Start the SDNC A1 Controller container and its database container | arg list | |--| | None |

Function: use_sdnc_http

Use http for all API calls towards the SDNC A1 Controller. This is the default. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_sdnc_http

Use https for all API calls towards the SDNC A1 Controller. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: start_mr

Start the Message Router stub interface container | arg list | |--| | None |

Function: use_mr_http

Use http for all Dmaap calls to the MR. This is the default. The admin API is not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_mr_https

Use https for all Dmaap call to the MR. The admin API is not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: start_cr

Start the Callback Receiver container | arg list | |--| | None |

Function: use_cr_http

Use http for getting event from CR. The admin API is not affected. This is the default. | arg list | |--| | None |

Function: use_cr_https

Use https for getting event from CR. The admin API is not affected. Note: Not yet used as callback event is not fully implemented/deciced. | arg list | |--| | None |

Function: start_prod_stub

Start the Producer stubb container | arg list | |--| | None |

Function: use_prod_stub_http

Use http for the API. The admin API is not affected. This is the default protocol. | arg list | |--| | None |

Function: use_prod_stub_https

Use https for the API. The admin API is not affected. | arg list | |--| | None |

Function: start_policy_agent

Start the Policy Agent container. If the test script is configured to use a stand alone Policy Agent (for example other container or stand alone app) the script will prompt for starting the stand alone Policy Agent. | arg list | |--| | None |

Function: use_agent_stand_alone

Configure to run the Policy Agent as a stand alone container or app. See also 'start_policy_agent' | arg list | |--| | None |

Function: use_agent_rest_http

Use http for all API calls to the Policy Agent. This is the default. | arg list | |--| | None |

Function: use_agent_rest_https

Use https for all API calls to the Policy Agent. | arg list | |--| | None |

Function: use_agent_dmaap_http

Send and recieve all API calls to the Policy Agent over Dmaap via the MR over http. | arg list | |--| | None |

Function: use_agent_dmaap_https

Send and recieve all API calls to the Policy Agent over Dmaap via the MR over https. | arg list | |--| | None |

Function: set_agent_debug

Configure the Policy Agent log on debug level. The Policy Agent must be running. | arg list | |--| | None |

Function: set_agent_trace

Configure the Policy Agent log on trace level. The Policy Agent must be running. | arg list | |--| | None |

Function: use_agent_retries

Configure the Policy Agent to make upto 5 retries if an API calls return any of the specified http return codes. | arg list | |--| | [<response-code>]* |

parameterdescription
[<response-code>]*A space separated list of http response codes, may be empty to reset to 'no codes'.

Function: start_ecs

Start the ECS container. | arg list | |--| | None |

Function: restart_ecs

Restart the ECS container. | arg list | |--| | None |

Function: use_ecs_rest_http

Use http for all API calls to the ECS. This is the default protocol. | arg list | |--| | None |

Function: use_ecs_rest_https

Use https for all API calls to the ECS. | arg list | |--| | None |

Function: use_ecs_dmaap_http

Send and recieve all API calls to the ECS over Dmaap via the MR using http. | arg list | |--| | None |

Function: use_ecs_dmaap_https

Send and recieve all API calls to the ECS over Dmaap via the MR using https. | arg list | |--| | None |

Function: set_ecs_debug

Configure the ECS log on debug level. The ECS must be running. | arg list | |--| | None |

Function: set_ecs_trace

Configure the ECS log on trace level. The ECS must be running. | arg list | |--| | None |

Function: check_policy_agent_logs

Check the Policy Agent log for any warnings and errors and print the count of each. | arg list | |--| | None |

Function: check_ecs_logs

Check the ECS log for any warnings and errors and print the count of each. | arg list | |--| | None |

Function: check_control_panel_logs

Check the Control Panel log for any warnings and errors and print the count of each. | arg list | |--| | None |

Function: check_sdnc_logs

Check the SDNC log for any warnings and errors and print the count of each. | arg list | |--| | None |

Function: store_logs

Take a snap-shot of all logs for all running containers and stores them in ./logs/<ATC-id>. All logs will get the specified prefix in the file name. In general, one of the last steps in an auto-test script shall be to call this function. If logs shall be taken several times during a test script, different prefixes shall be used each time. | arg list | |--| | <logfile-prefix> |

parameterdescription
<logfile-prefix>Log file prefix

Function: mr_equal

Tests if a variable value in the Message Router (MR) simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameterdescription
<variable-name>Variable name in the MR
<target-value>Target value for the variable
<timeout-in-sec>Max time to wait for the variable to reach the target value

Function: mr_greater

Tests if a variable value in the Message Router (MR) simulator is greater than a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is greater than the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes greater than the target value or not. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameterdescription
<variable-name>Variable name in the MR
<target-value>Target value for the variable
<timeout-in-sec>Max time to wait for the variable to become grater than the target value

Function: mr_read

Reads the value of a variable in the Message Router (MR) simulator. The value is intended to be passed to a env variable in the test script. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> |

parameterdescription
<variable-name>Variable name in the MR

Function: mr_print

Prints the value of a variable in the Message Router (MR) simulator. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> |

parameterdescription
<variable-name>Variable name in the MR

Function: indent1

Indent every line of a command output with one space char. | arg list | |--| | None |

Function: indent2

Indent every line of a command output with two space chars. | arg list | |--| | None |

Description of functions in testsuite_common.sh

Function: suite_setup

Sets up the test suite and prints out a heading. | arg list | |--| | None |

suite_complete

Print out the overall result of the executed test cases. | arg list | |--| | None |

Description of functions in agent_api_function.sh

General

Both PMS version 1 and 2 are supported. The version is controlled by the env variable $PMS_VERSION set in the test env file.

Function: api_equal()

Tests if the array length of a json array in the Policy Agent simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the array length is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the array length becomes equal to the target value or not. See the 'cr' dir for more details.

arg list
<variable-name> <target-value> [ <timeout-in-sec> ]
parameterdescription
<variable-name>Relative url. Example 'json:policy_types' - checks the json array length of the url /policy_types
<target-value>Target value for the length
<timeout-in-sec>Max time to wait for the length to reach the target value

Function: api_get_policies()

Test of GET '/policies' or V2 GET '/v2/policy-instances' and optional check of the array of returned policies. To test the response code only, provide the response code parameter as well as the following three parameters. To also test the response payload add the 'NOID' for an expected empty array or repeat the last five/seven parameters for each expected policy.

arg list
`
arg list V2
`
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
NORICIndicator that no ric is provided
<service-id>Id of the service
NOSERVICEIndicator that no service id is provided
<policy-type-id>Id of the policy type
NOTYPEIndicator that no type id is provided
NOIDIndicator that no policy id is provided - indicate empty list of policies
<policy-id>Id of the policy
EMPTYIndicate for the special empty policy type
transientTransient, true or false
notification-urlUrl for notifications
<template-file>Path to the template file for the policy (same template used when creating the policy)

Function: api_get_policy()

Test of GET '/policy' or V2 GET '/v2/policies/{policy_id}' and optional check of the returned json payload. To test the the response code only, provide the expected response code and policy id. To test the contents of the returned json payload, add a path to the template file used when creating the policy.

arg list
<response-code> <policy-id> [<template-file>]
arg list V2
` [
parameterdescription
<response-code>Expected http response code
<policy-id>Id of the policy
<template-file>Path to the template file for the policy (same template used when creating the policy)
<service-id>Id of the service
<ric-id>Id of the ric
<policy-type-id>Id of the policy type
NOTYPEIndicator that no type id is provided
transientTransient, true or false
notification-urlUrl for notifications

Function: api_put_policy()

Test of PUT '/policy' or V2 PUT '/policies'. If more than one policy shall be created, add a count value to indicate the number of policies to create. Note that if more than one policy shall be created the provided policy-id must be numerical (will be used as the starting id).

arg list
<response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient> <template-file> [<count>]
arg list V2
`
parameterdescription
<response-code>Expected http response code
<service-id>Id of the service
<ric-id>Id of the ric
<policy-type-id>Id of the policy type
<policy-id>Id of the policy. This value shall be a numeric value if more than one policy shall be created
transient>Transient 'true' or 'false'. 'NOTRANSIENT' can be used to indicate using the default value (no transient value provided)
notification-urlUrl for notifications
NOURLIndicator for no url
<template-file>Path to the template file for the policy
<count>An optional count (default is 1). If a value greater than 1 is given, the policy ids will use the given policy id as the first id and add 1 to that id for each new policy

Function: api_put_policy_batch()

This tests the same as function 'api_put_policy' except that all put requests are sent to dmaap in one go and then the responses are polled one by one. If the agent api is not configured to use dmaap (see 'use_agent_dmaap', 'use_agent_rest_http' and 'use_agent_rest_https'), an error message is printed. For arg list and parameters, see 'api_put_policy'.

Function: api_put_policy_parallel()

This tests the same as function 'api_put_policy' except that the policy create is spread out over a number of processes and it only uses the agent rest API. The total number of policies created is determined by the product of the parameters 'number-of-rics' and 'count'. The parameter 'number-of-threads' shall be selected to be not evenly divisible by the product of the parameters 'number-of-rics' and 'count' - this is to ensure that one process does not handle the creation of all the policies in one ric.

arg list
<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>
arg list
`
parameterdescription
<response-code>Expected http response code
<service-id>Id of the service
<ric-id-base>The base id of the rics, ie ric id without the sequence number. The sequence number is added during processing
<number-of-rics>The number of rics, assuming the first index is '1'. The index is added to the 'ric-id-base' id
<policy-type-id>Id of the policy type
<policy-start-id>Id of the policy. This value shall be a numeric value and will be the id of the first policy
transient>Transient 'true' or 'false'. 'NOTRANSIENT' can be used to indicate using the default value (no transient value provide)
notification-urlUrl for notifications
<template-file>Path to the template file for the policy
<count-per-ric>Number of policies per ric
<number-of-threads>Number of threads (processes) to run in parallel

Function: api_delete_policy()

This tests the DELETE '/policy' or V2 DELETE '/v2/policies/{policy_id}'. Removes the indicated policy or a 'count' number of policies starting with 'policy-id' as the first id.

arg list
<response-code> <policy-id> [<count>]
parameterdescription
<response-code>Expected http response code
<policy-id>Id of the policy
<count>An optional count of policies to delete. The 'policy-id' will be the first id to be deleted.

Function: api_delete_policy_batch()

This tests the same as function 'api_delete_policy' except that all delete requests are sent to dmaap in one go and then the responses are polled one by one. If the agent api is not configured to used dmaap (see 'use_agent_dmaap', 'use_agent_rest_http' and 'use_agent_rest_https'), an error message is printed. For arg list and parameters, see 'api_delete_policy'.

Function: api_delete_policy_parallel()

This tests the same as function 'api_delete_policy' except that the policy delete is spread out over a number of processes and it only uses the agent rest API. The total number of policies deleted is determined by the product of the parameters 'number-of-rics' and 'count'. The parameter 'number-of-threads' shall be selected to be not evenly divisible by the product of the parameters 'number-of-rics' and 'count' - this is to ensure that one process does not handle the deletion of all the policies in one ric.

arg list
<response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>
parameterdescription
<response-code>Expected http response code
<ric-id-base>The base id of the rics, ie ric id without the sequence number. The sequence number is added during processing
<number-of-rics>The number of rics, assuming the first index is '1'
<policy-start-id>Id of the policy. This value shall be a numeric value and will be the id of the first policy
<count-per-ric>Number of policies per ric
<number-of-threads>Number of threads (processes) to run in parallel

Function: api_get_policy_ids()

Test of GET '/policy_ids' or V2 GET '/v2/policies'. To test response code only, provide the response code parameter as well as the following three parameters. To also test the response payload add the 'NOID' for an expected empty array or repeat the 'policy-instance-id' for each expected policy id.

arg list
`
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
NORICIndicator that no ric is provided
<service-id>Id of the service
NOSERVICEIndicator that no service id is provided
type-id>Id of the policy type
NOTYPEIndicator that no type id is provided
NOIDIndicator that no policy id is provided - indicate empty list of policies
<policy-instance-id>Id of the policy

Function: api_get_policy_schema()

Test of V2 GET '/v2/policy-types/{policyTypeId}' and optional check of the returned json schema. To test the response code only, provide the expected response code and policy type id. To test the contents of the returned json schema, add a path to a schema file to compare with.

arg list
<response-code> <policy-type-id> [<schema-file>]
parameterdescription
<response-code>Expected http response code
<policy-type-id>Id of the policy type
<schema-file>Path to the schema file for the policy type

Function: api_get_policy_schema()

Test of GET '/policy_schema' and optional check of the returned json schema. To test the response code only, provide the expected response code and policy type id. To test the contents of the returned json schema, add a path to a schema file to compare with.

arg list
<response-code> <policy-type-id> [<schema-file>]
parameterdescription
<response-code>Expected http response code
<policy-type-id>Id of the policy type
<schema-file>Path to the schema file for the policy type

Function: api_get_policy_schemas()

Test of GET '/policy_schemas' and optional check of the returned json schemas. To test the response code only, provide the expected response code and ric id (or NORIC if no ric is given). To test the contents of the returned json schema, add a path to a schema file to compare with (or NOFILE to represent an empty '{}' type)

arg list
`
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
NORICNo ric id given
<schema-file>Path to the schema file for the policy type
NOFILEIndicate the template for an empty type

Function: api_get_policy_status()

Test of GET '/policy_status' or V2 GET '/policies/{policy_id}/status'.

arg list
` (STD [])
parameterdescription
<response-code>Expected http response code
<policy-id>Id of the policy
STDIndicator of status of Standarized A1
<enforce-status>Enforcement status
<reason>Optional reason
OSCIndicator of status of Non-Standarized OSC A1
<instance-status>Instance status
<has-been-deleted>Deleted status, true or false

Function: api_get_policy_types()

Test of GET '/policy_types' or V2 GET '/v2/policy-types' and optional check of the returned ids. To test the response code only, provide the expected response code and ric id (or NORIC if no ric is given). To test the contents of the returned json payload, add the list of expected policy type id (or 'EMPTY' for the '{}' type)

arg list
` [
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
NORICNo ric id given
<policy-type-id>Id of the policy type
EMPTYIndicate the empty type

Function: api_get_status()

Test of GET /status or V2 GET /status

arg list
<response-code>
parameterdescription
<response-code>Expected http response code

Function: api_get_ric()

Test of GET '/ric' or V2 GET '/v2/rics/ric' To test the response code only, provide the expected response code and managed element id. To test the returned ric id, provide the expected ric id.

arg list
<reponse-code> <managed-element-id> [<ric-id>]
arg list V2
`
parameterdescription
<response-code>Expected http response code
<managed-element-id>Id of the managed element
NOMEIndicator for no ME
ric-idId of the ric
NORICIndicator no RIC
string-of-ricinfoString of ric info

Function: api_get_rics()

Test of GET '/rics' or V2 GET '/v2/rics' and optional check of the returned json payload (ricinfo). To test the response code only, provide the expected response code and policy type id (or NOTYPE if no type is given). To test also the returned payload, add the formatted string of info in the returned payload. Format of ricinfo: '::' Example <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."

arg list
`
parameterdescription
<response-code>Expected http response code
<policy-type-id>Policy type id of the ric
NOTYPE>No type given
<space-separate-string-of-ricinfo>A space separated string of ric info - needs to be quoted

Function: api_put_service()

Test of PUT '/service' or V2 PUT '/service'. | arg list | |--| | <response-code> <service-name> <keepalive-timeout> <callbackurl> |

parameterdescription
<response-code>Expected http response code
<service-name>Service name
<keepalive-timeout>Timeout value
<callbackurl>Callback url

Function: api_get_services()

Test of GET '/service' or V2 GET '/v2/services' and optional check of the returned json payload. To test only the response code, omit all parameters except the expected response code. To test the returned json, provide the parameters after the response code.

arg list
` [ ( )
parameterdescription
<response-code>Expected http response code
`Service name for the query
`Target service name
<keepalive-timeout>Timeout value
<callbackurl>Callback url
NOSERVICEIndicator of no target service name

Function: api_get_service_ids()

Test of GET '/services' or V2 GET /'v2/services'. Only check of service ids.

arg list
<response-code> [<service-name>]*
parameterdescription
<response-code>Expected http response code
<service-name>Service name

Function: api_delete_services()

Test of DELETE '/services' or V2 DELETE '/v2/services/{serviceId}'

arg list
<response-code> [<service-name>]*
parameterdescription
<response-code>Expected http response code
<service-name>Service name

Function: api_put_services_keepalive()

Test of PUT '/services/keepalive' or V2 PUT '/v2/services/{service_id}/keepalive'

arg list
`
parameterdescription
<response-code>Expected http response code
<service-name>Service name

Description of functions in ricsimulator_api_functions.sh

The functions below only use the admin interface of the simulator, no usage of the A1 interface.

Function: sim_equal

Tests if a variable value in the RIC simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'a1-interface' repo for more details.

arg list
<variable-name> <target-value> [ <timeout-in-sec> ]
parameterdescription
<variable-name>Variable name in the ric simulator
<target-value>Target value for the variable
<timeout-in-sec>Max time to wait for the variable to reach the target value

Function: sim_print

Prints the value of a variable in the RIC simulator. See the 'a1-interface' repo for more details.

arg list
<variable-name>
parameterdescription
<variable-name>Variable name in the RIC simulator

Function: sim_contains_str

Tests if a variable value in the RIC simulator contains a target string. Without the timeout, the test sets pass or fail immediately depending on if the variable contains the target string or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value contains the target string or not. See the 'a1-interface' repo for more details.

arg list
<variable-name> <target-value> [ <timeout-in-sec> ]
parameterdescription
<variable-name>Variable name in the ric simulator
<target-value>Target substring for the variable
<timeout-in-sec>Max time to wait for the variable to reach the target value

Function: sim_put_policy_type

Loads a policy type to the simulator

arg list
<response-code> <ric-id> <policy-type-id> <policy-type-file>
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
<policy-type-id>Id of the policy type
<policy-type-file>Path to the schema file of the policy type

Function: sim_delete_policy_type

Deletes a policy type from the simulator

arg list
<response-code> <ric-id> <policy_type_id>
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
<policy-type-id>Id of the policy type

Function: sim_post_delete_instances

Deletes all instances (and status), for one ric

arg list
<response-code> <ric-id>
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric

Function: sim_post_delete_all

Deletes all types, instances (and status), for one ric

arg list
<response-code> <ric-id>
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric

Function: sim_post_forcedresponse

Sets (or resets) response code for next (one) A1 message, for one ric. The intention is to simulate error response on the A1 interface.

arg list
<response-code> <ric-id> [<forced_response_code>]
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
<forced_response_code>Http response code to send

Function: sim_post_forcedelay

Sets (or resets) A1 response delay, for one ric The intention is to delay responses on the A1 interface. Setting remains until removed.

arg list
<response-code> <ric-id> [<delay-in-seconds>]
parameterdescription
<response-code>Expected http response code
<ric-id>Id of the ric
<delay-in-seconds>Delay in seconds. If omitted, the delay is removed

Description of functions in controller_api_functions.sh

The file contains a selection of the possible API tests towards the a1-controller

Function: controller_api_get_A1_policy_ids

Test of GET policy ids towards OSC or STD type simulator. To test response code only, provide the response code, 'OSC' + policy type or 'STD' To test the response payload, include the ids of the expexted response.

arg list
` (OSC [ []* ])
parameterdescription
<response-code>Expected http response code
OSCIndicator of status of Non-Standarized OSC A1
<ric-id>Id of the ric
policy-type-id>Id of the policy type
<policy-id>Id of the policy
STDIndicator of status of Standarized A1

Function: controller_api_get_A1_policy_type

Test of GET a policy type (OSC only)

arg list
<response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]
parameterdescription
<response-code>Expected http response code
OSCIndicator of status of Non-Standarized OSC A1
<ric-id>Id of the ric
policy-type-id>Id of the policy type
policy-type-file>Optional schema file to compare the returned type with

Function: controller_api_delete_A1_policy

Deletes a policy instance

arg list
`(STD )
parameterdescription
<response-code>Expected http response code
STDIndicator of status of Standarized A1
<ric-id>Id of the ric
<policy-id>Id of the policy
policy-type-id>Id of the policy type
OSCIndicator of status of Non-Standarized OSC A1
policy-type-file>Optional schema file to compare the returned type with

Function: controller_api_put_A1_policy

Creates a policy instance

arg list
` (STD )
parameterdescription
<response-code>Expected http response code
STDIndicator of status of Standarized A1
<ric-id>Id of the ric
<policy-id>Id of the policy
<template-file>Path to the template file of the policy
OSCIndicator of status of Non-Standarized OSC A1
<policy-type-id>Id of the policy type

Function: controller_api_get_A1_policy_status

Checks the status of a policy

arg list
` (STD [])
parameterdescription
<response-code>Expected http response code
STDIndicator of status of Standarized A1
<ric-id>Id of the ric
<policy-id>Id of the policy
<enforce-status>Enforcement status
<reason>Optional reason
OSCIndicator of status of Non-Standarized OSC A1
<policy-type-id>Id of the policy type
<instance-status>Instance status
<has-been-deleted>Deleted status, true or false

Description of functions in ecs_api_function.sh

Function: ecs_api_a1_get_job_ids()

Test of GET '/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs' and optional check of the array of returned job ids. To test the response code only, provide the response code parameter as well as a type id and an owner id. To also test the response payload add the 'EMPTY' for an expected empty array or repeat the last parameter for each expected job id.

arg list
`
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<owner-id>Id of the job owner
NOOWNERNo owner is given
<job-id>Id of the expected job
EMPTYThe expected list of job id shall be empty

Function: ecs_api_a1_get_type()

Test of GET '/A1-EI​/v1​/eitypes​/{eiTypeId}' and optional check of the returned schema. To test the response code only, provide the response code parameter as well as the type-id. To also test the response payload add a path to the expected schema file.

arg list
<response-code> <type-id> [<schema-file>]
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<schema-file>Path to a schema file to compare with the returned schema

Function: ecs_api_a1_get_type_ids()

Test of GET '/A1-EI​/v1​/eitypes' and optional check of returned list of type ids. To test the response code only, provide the response only. To also test the response payload add the list of expected type ids (or EMPTY if the list is expected to be empty).

arg list
` [ (EMPTY
parameterdescription
<response-code>Expected http response code
EMPTYThe expected list of type ids shall be empty
<type-id>Id of the EI type

Function: ecs_api_a1_get_job_status()

Test of GET '/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}​/status' and optional check of the returned status. To test the response code only, provide the response code, type id and job id. To also test the response payload add the expected status.

arg list
<response-code> <type-id> <job-id> [<status>]
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<job-id>Id of the job
<status>Expected status

Function: ecs_api_a1_get_job()

Test of GET '/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}' and optional check of the returned job. To test the response code only, provide the response code, type id and job id. To also test the response payload add the remaining parameters.

arg list
<response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<job-id>Id of the job
<target-url>Expected target url for the job
<owner-id>Expected owner for the job
<template-job-file>Path to a job template for job parameters of the job

Function: ecs_api_a1_delete_job()

Test of DELETE '/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}'. To test, provide all the specified parameters.

arg list
`
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<job-id>Id of the job

Function: ecs_api_a1_put_job()

Test of PUT '/A1-EI​/v1​/eitypes​/{eiTypeId}​/eijobs​/{eiJobId}'. To test, provide all the specified parameters.

arg list
<response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file>
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<job-id>Id of the job
<target-url>Target url for the job
<owner-id>Owner of the job
<template-job-file>Path to a job template for job parameters of the job

Function: ecs_api_edp_get_type_ids()

Test of GET '/ei-producer/v1/eitypes' and an optional check of the returned list of type ids. To test the response code only, provide the response code. To also test the response payload add list of expected type ids (or EMPTY if the list is expected to be empty).

arg list
` [ EMPTY
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
EMPTYThe expected list of type ids shall be empty

Function: ecs_api_edp_get_producer_status()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}/status' and optional check of the returned status. To test the response code only, provide the response code and producer id. To also test the response payload add the expected status.

arg list
<response-code> <producer-id> [<status>]
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<status>The expected status string

Function: ecs_api_edp_get_producer_ids()

Test of GET '/ei-producer/v1/eiproducers' and optional check of the returned producer ids. To test the response code only, provide the response. To also test the response payload add the list of expected producer-ids (or EMPTY if the list of ids is expected to be empty).

arg list
` [ EMPTY
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
EMPTYThe expected list of type ids shall be empty

Function: ecs_api_edp_get_type()

Test of GET '/ei-producer/v1/eitypes/{eiTypeId}' and optional check of the returned type. To test the response code only, provide the response and the type-id. To also test the response payload add a path to a job schema file and a list expected producer-id (or EMPTY if the list of ids is expected to be empty).

arg list
` [ (EMPTY
parameterdescription
<response-code>Expected http response code
<type-id>Id of the EI type
<job-schema-file>Path to a job schema file
<producer-id>Id of the producer
EMPTYThe expected list of type ids shall be empty

Function: ecs_api_edp_get_producer()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}' and optional check of the returned producer. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters defining thee producer.

arg list
` [ (EMPTY
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<create-callback>Callback for create job
<delete-callback>Callback for delete job
<supervision-callback>Callback for producer supervision
<type-id>Id of the EI type
<schema-file>Path to a schema file
EMPTYThe expected list of type schema pairs shall be empty

Function: ecs_api_edp_delete_producer()

Test of DELETE '/ei-producer/v1/eiproducers/{eiProducerId}'. To test, provide all parameters.

arg list
<response-code> <producer-id>
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer

Function: ecs_api_edp_put_producer()

Test of PUT '/ei-producer/v1/eiproducers/{eiProducerId}'. To test, provide all parameters. The list of type/schema pair may be empty.

arg list
` (EMPTY
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<create-callback>Callback for create job
<delete-callback>Callback for delete job
<supervision-callback>Callback for producer supervision
<type-id>Id of the EI type
<schema-file>Path to a schema file
EMPTYThe list of type/schema pairs is empty

Function: ecs_api_edp_get_producer_jobs()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}/eijobs' and optional check of the returned producer job. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters.

arg list
` (EMPTY
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<job-id>Id of the job
<type-id>Id of the EI type
<target-url>Target url for data delivery
<template-job-file>Path to a job template file
EMPTYThe list of job/type/target/job-file tuples is empty

Function: ecs_api_service_status()

Test of GET '/status'.

arg list
<response-code>
parameterdescription
<response-code>Expected http response code

Description of functions in prodstub_api_function.sh

Function: prodstub_arm_producer()

Preconfigure the prodstub with a producer. The producer supervision response code is optional, if not given the response code will be set to 200.

arg list
<response-code> <producer-id> [<forced_response_code>]
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<forced_response_code>Forced response code for the producer callback url

Function: prodstub_arm_job_create()

Preconfigure the prodstub with a job or update an existing job. Optional create/update job response code, if not given the response code will be set to 200/201 depending on if the job has been previously created or not.

arg list
<response-code> <job-id> [<forced_response_code>]
parameterdescription
<response-code>Expected http response code
<job-id>Id of the job
<forced_response_code>Forced response code for the create callback url

Function: prodstub_arm_job_delete()

Preconfigure the prodstub with a job. Optional delete job response code, if not given the response code will be set to 204/404 depending on if the job exists or not.

arg list
<response-code> <job-id> [<forced_response_code>]
parameterdescription
<response-code>Expected http response code
<job-id>Id of the job
<forced_response_code>Forced response code for the delete callback url

Function: prodstub_arm_type()

Preconfigure the prodstub with a type for a producer. Can be called multiple times to add more types.

arg list
<response-code> <producer-id> <type-id>
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<type-id>Id of the type

Function: prodstub_disarm_type()

Remove a type for the producer in the rodstub. Can be called multiple times to remove more types.

arg list
<response-code> <producer-id> <type-id>
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<type-id>Id of the type

Function: prodstub_check_jobdata()

Check a job in the prodstub towards the list of provided parameters.

arg list
<response-code> <producer-id> <job-id> <type-id> <target-url> <template-job-file>
parameterdescription
<response-code>Expected http response code
<producer-id>Id of the producer
<job-id>Id of the job
<type-id>Id of the type
<target-url>Target url for data delivery
<template-job-file>Path to a job template file

Function: prodstub_equal

Tests if a variable value in the prodstub is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not.

arg list
<variable-name> <target-value> [ <timeout-in-sec> ]
parameterdescription
<variable-name>Variable name in the prostub
<target-value>Target value for the variable
<timeout-in-sec>Max time to wait for the variable to reach the target value

Description of functions in cr_api_function.sh

Function: cr_equal

Tests if a variable value in the Callback Receiver (CR) simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'cr' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameterdescription
<variable-name>Variable name in the CR
<target-value>Target value for the variable
<timeout-in-sec>Max time to wait for the variable to reach the target value

Function: cr_api_check_all_sync_events()

Check the contents of all ric events received for a callback id.

arg list
` [ EMPTY
parameterdescription
<response-code>Expected http response code
<id>Id of the callback destination
EMPTYIndicator for an empty list
<ric-id>Id of the ric

License

Copyright (C) 2020 Nordix Foundation. All rights reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

 http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.