test/common/http_proxy_api_functions.sh - oransc/nonrtric - Gitiles

 #!/bin/bash

 #  ============LICENSE_START===============================================
 #  Copyright (C) 2020 Nordix Foundation. All rights reserved.
 #  ========================================================================
 #  Licensed under the Apache License, Version 2.0 (the "License");
 #  you may not use this file except in compliance with the License.
 #  You may obtain a copy of the License at
 #
 #       http://www.apache.org/licenses/LICENSE-2.0
 #
 #  Unless required by applicable law or agreed to in writing, software
 #  distributed under the License is distributed on an "AS IS" BASIS,
 #  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 #  See the License for the specific language governing permissions and
 #  limitations under the License.
 #  ============LICENSE_END=================================================
 #

 # This is a script that contains container/service managemnt functions for Http Proxy

 ################ Test engine functions ################

 # Create the image var used during the test
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __HTTPPROXY_imagesetup() {
 	__check_and_create_image_var HTTPPROXY "HTTP_PROXY_IMAGE" "HTTP_PROXY_IMAGE_BASE" "HTTP_PROXY_IMAGE_TAG" LOCAL "$HTTP_PROXY_DISPLAY_NAME"
 }

 # Pull image from remote repo or use locally built image
 # arg: <pull-policy-override> <pull-policy-original>
 # <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
 # <pull-policy-original> Shall be used for images that does not allow overriding
 # Both var may contain: 'remote', 'remote-remove' or 'local'
 __HTTPPROXY_imagepull() {
 	__check_and_pull_image $2 "$HTTP_PROXY_DISPLAY_NAME" $HTTP_PROXY_APP_NAME HTTP_PROXY_IMAGE
 }

 # Build image (only for simulator or interfaces stubs owned by the test environment)
 # arg: <image-tag-suffix> (selects staging, snapshot, release etc)
 # <image-tag-suffix> is present only for images with staging, snapshot,release tags
 __HTTPPROXY_imagebuild() {
 	cd ../$HTTP_PROXY_BUILD_DIR       # Note: Reusing same impl as for kube proxy
 	echo " Building HTTPPROXY - $HTTP_PROXY_DISPLAY_NAME - image: $HTTP_PROXY_IMAGE"
 	docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $HTTP_PROXY_IMAGE . &> .dockererr
 	if [ $? -eq 0 ]; then
 		echo -e  $GREEN"  Build Ok"$EGREEN
 		__retag_and_push_image HTTP_PROXY_IMAGE
 		if [ $? -ne 0 ]; then
 			exit 1
 		fi
 	else
 		echo -e $RED"  Build Failed"$ERED
 		((RES_CONF_FAIL++))
 		cat .dockererr
 		echo -e $RED"Exiting...."$ERED
 		exit 1
 	fi
 }

 # Generate a string for each included image using the app display name and a docker images format string
 # If a custom image repo is used then also the source image from the local repo is listed
 # arg: <docker-images-format-string> <file-to-append>
 __HTTPPROXY_image_data() {
 	echo -e "$HTTP_PROXY_DISPLAY_NAME\t$(docker images --format $1 $HTTP_PROXY_IMAGE)" >>   $2
 	if [ ! -z "$HTTP_PROXY_IMAGE_SOURCE" ]; then
 		echo -e "-- source image --\t$(docker images --format $1 $HTTP_PROXY_IMAGE_SOURCE)" >>   $2
 	fi
 }

 # Scale kubernetes resources to zero
 # All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
 # This function is called for apps fully managed by the test script
 __HTTPPROXY_kube_scale_zero() {
 	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
 }

 # Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
 # This function is called for prestarted apps not managed by the test script.
 __HTTPPROXY_kube_scale_zero_and_wait() {
 	echo -e $RED" HTTPPROXY replicas kept as is"$ERED
 }

 # Delete all kube resouces for the app
 # This function is called for apps managed by the test script.
 __HTTPPROXY_kube_delete_all() {
 	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
 }

 # Store docker logs
 # This function is called for apps managed by the test script.
 # args: <log-dir> <file-prexix>
 __HTTPPROXY_store_docker_logs() {
 	if [ $RUNMODE == "KUBE" ]; then
 		kubectl  logs -l "autotest=HTTPPROXY" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_httpproxy.log 2>&1
 	else
 		docker logs $HTTP_PROXY_APP_NAME > $1$2_httpproxy.log 2>&1
 	fi
 }

 # Initial setup of protocol, host and ports
 # This function is called for apps managed by the test script.
 # args: -
 __HTTPPROXY_initial_setup() {
 	:
 }

 # Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
 # For docker, the namespace shall be excluded
 # This function is called for apps managed by the test script as well as for prestarted apps.
 # args: -
 __HTTPPROXY_statisics_setup() {
 	if [ $RUNMODE == "KUBE" ]; then
 		echo "HTTPPROXY $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE"
 	else
 		echo "HTTPPROXY $HTTP_PROXY_APP_NAME"
 	fi
 }

 #######################################################


 ## Access to Http Proxy Receiver
 # Host name may be changed if app started by kube
 # Direct access from script
 HTTP_PROXY_HTTPX="http"
 HTTP_PROXY_HOST_NAME=$LOCALHOST_NAME
 HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT

 #########################
 ### Http Proxy functions
 #########################

 # All calls to httpproxy will be directed to the http interface
 # args: -
 # (Function for test scripts)
 use_http_proxy_http() {
 	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
 	echo -e " Using $BOLD http $EBOLD"
 	HTTP_PROXY_HTTPX="http"
 	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_PORT

 	echo ""
 }

 # All calls to httpproxy will be directed to the https interface
 # args: -
 # (Function for test scripts)
 use_http_proxy_https() {
 	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
 	echo -e " Using $BOLD https $EBOLD"
 	HTTP_PROXY_HTTPX="https"
 	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_SECURE_PORT

 	echo ""
 }

 # Start the Http Proxy in the simulator group
 # args: -
 # (Function for test scripts)
 start_http_proxy() {

 	echo -e $BOLD"Starting $HTTP_PROXY_DISPLAY_NAME"$EBOLD

 	if [ $RUNMODE == "KUBE" ]; then

 		# Check if app shall be fully managed by the test script
 		__check_included_image "HTTPPROXY"
 		retcode_i=$?

 		# Check if app shall only be used by the testscipt
 		__check_prestarted_image "HTTPPROXY"
 		retcode_p=$?

 		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
 			echo -e $RED"The $HTTP_PROXY_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
 			echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
 			exit
 		fi
 		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
 			echo -e $RED"The $HTTP_PROXY_APP_NAME app is included both as managed and prestarted in this test script"$ERED
 			echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
 			exit
 		fi

 		# Check if app shall be used - not managed - by the test script
 		if [ $retcode_p -eq 0 ]; then
 			echo -e " Using existing $HTTP_PROXY_APP_NAME deployment and service"
 			echo " Setting HTTPPROXY replicas=1"
 			__kube_scale deployment $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE 1
 		fi

 		if [ $retcode_i -eq 0 ]; then
 			echo -e " Creating $HTTP_PROXY_APP_NAME deployment and service"
 			export HTTP_PROXY_APP_NAME

 			export HTTP_PROXY_WEB_EXTERNAL_PORT
 			export HTTP_PROXY_WEB_INTERNAL_PORT
 			export HTTP_PROXY_EXTERNAL_PORT
 			export HTTP_PROXY_INTERNAL_PORT

 			export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
 			export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
 			export HTTP_PROXY_EXTERNAL_SECURE_PORT
 			export HTTP_PROXY_INTERNAL_SECURE_PORT

 			export KUBE_SIM_NAMESPACE
 			export HTTP_PROXY_IMAGE

 			__kube_create_namespace $KUBE_SIM_NAMESPACE

 			# Create service
 			input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"svc.yaml
 			output_yaml=$PWD/tmp/proxy_svc.yaml
 			__kube_create_instance service $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

 			# Create app
 			input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"app.yaml
 			output_yaml=$PWD/tmp/proxy_app.yaml
 			__kube_create_instance app $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

 		fi

 		echo " Retrieving host and ports for service..."
 		HTTP_PROXY_HOST_NAME=$(__kube_get_service_host $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE)
 		HTTP_PROXY_WEB_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")
 		HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "webs")

 		HTTP_PROXY_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")
 		HTTP_PROXY_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "https")

 		if [ $HTTP_PROXY_HTTPX == "http" ]; then
 			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT
 			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_PORT
 			HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

 			echo " Host IP, http port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_PORT"
 		else
 			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
 			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_SECURE_PORT
 			HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

 			echo " Host IP, https port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT"
 		fi

 		__check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

 	else
 		# Check if docker app shall be fully managed by the test script
 		__check_included_image 'HTTPPROXY'
 		if [ $? -eq 1 ]; then
 			echo -e $RED"The Http Proxy app is not included in this test script"$ERED
 			echo -e $RED"The Http Proxy will not be started"$ERED
 			exit
 		fi

 		export HTTP_PROXY_APP_NAME
 		export HTTP_PROXY_EXTERNAL_PORT
 		export HTTP_PROXY_INTERNAL_PORT
 		export HTTP_PROXY_EXTERNAL_SECURE_PORT
 		export HTTP_PROXY_INTERNAL_SECURE_PORT
 		export HTTP_PROXY_WEB_EXTERNAL_PORT
 		export HTTP_PROXY_WEB_INTERNAL_PORT
 		export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
 		export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
 		export DOCKER_SIM_NWNAME

 		export HTTP_PROXY_DISPLAY_NAME

 		__start_container $HTTP_PROXY_COMPOSE_DIR "" NODOCKERARGS 1 $HTTP_PROXY_APP_NAME

 		if [ $HTTP_PROXY_HTTPX == "http" ]; then
 			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_PORT
 		else
 			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
 		fi
         __check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

 		if [ $HTTP_PROXY_HTTPX == "http" ]; then
 			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_PORT
 		else
 			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_SECURE_PORT
 		fi
 		HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME

 	fi
 	echo ""
 }
	#!/bin/bash

	# ============LICENSE_START===============================================
	# Copyright (C) 2020 Nordix Foundation. All rights reserved.
	# ========================================================================
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# ============LICENSE_END=================================================
	#

	# This is a script that contains container/service managemnt functions for Http Proxy

	################ Test engine functions ################

	# Create the image var used during the test
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__HTTPPROXY_imagesetup() {
	__check_and_create_image_var HTTPPROXY "HTTP_PROXY_IMAGE" "HTTP_PROXY_IMAGE_BASE" "HTTP_PROXY_IMAGE_TAG" LOCAL "$HTTP_PROXY_DISPLAY_NAME"
	}

	# Pull image from remote repo or use locally built image
	# arg: <pull-policy-override> <pull-policy-original>
	# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
	# <pull-policy-original> Shall be used for images that does not allow overriding
	# Both var may contain: 'remote', 'remote-remove' or 'local'
	__HTTPPROXY_imagepull() {
	__check_and_pull_image $2 "$HTTP_PROXY_DISPLAY_NAME" $HTTP_PROXY_APP_NAME HTTP_PROXY_IMAGE
	}

	# Build image (only for simulator or interfaces stubs owned by the test environment)
	# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
	# <image-tag-suffix> is present only for images with staging, snapshot,release tags
	__HTTPPROXY_imagebuild() {
	cd ../$HTTP_PROXY_BUILD_DIR # Note: Reusing same impl as for kube proxy
	echo " Building HTTPPROXY - $HTTP_PROXY_DISPLAY_NAME - image: $HTTP_PROXY_IMAGE"
	docker build --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $HTTP_PROXY_IMAGE . &> .dockererr
	if [ $? -eq 0 ]; then
	echo -e $GREEN" Build Ok"$EGREEN
	__retag_and_push_image HTTP_PROXY_IMAGE
	if [ $? -ne 0 ]; then
	exit 1
	fi
	else
	echo -e $RED" Build Failed"$ERED
	((RES_CONF_FAIL++))
	cat .dockererr
	echo -e $RED"Exiting...."$ERED
	exit 1
	fi
	}

	# Generate a string for each included image using the app display name and a docker images format string
	# If a custom image repo is used then also the source image from the local repo is listed
	# arg: <docker-images-format-string> <file-to-append>
	__HTTPPROXY_image_data() {
	echo -e "$HTTP_PROXY_DISPLAY_NAME\t$(docker images --format $1 $HTTP_PROXY_IMAGE)" >> $2
	if [ ! -z "$HTTP_PROXY_IMAGE_SOURCE" ]; then
	echo -e "-- source image --\t$(docker images --format $1 $HTTP_PROXY_IMAGE_SOURCE)" >> $2
	fi
	}

	# Scale kubernetes resources to zero
	# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
	# This function is called for apps fully managed by the test script
	__HTTPPROXY_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
	}

	# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
	# This function is called for prestarted apps not managed by the test script.
	__HTTPPROXY_kube_scale_zero_and_wait() {
	echo -e $RED" HTTPPROXY replicas kept as is"$ERED
	}

	# Delete all kube resouces for the app
	# This function is called for apps managed by the test script.
	__HTTPPROXY_kube_delete_all() {
	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
	}

	# Store docker logs
	# This function is called for apps managed by the test script.
	# args: <log-dir> <file-prexix>
	__HTTPPROXY_store_docker_logs() {
	if [ $RUNMODE == "KUBE" ]; then
	kubectl logs -l "autotest=HTTPPROXY" -n $KUBE_SIM_NAMESPACE --tail=-1 > $1$2_httpproxy.log 2>&1
	else
	docker logs $HTTP_PROXY_APP_NAME > $1$2_httpproxy.log 2>&1
	fi
	}

	# Initial setup of protocol, host and ports
	# This function is called for apps managed by the test script.
	# args: -
	__HTTPPROXY_initial_setup() {
	:
	}

	# Set app short-name, app name and namespace for logging runtime statistics of kubernets pods or docker containers
	# For docker, the namespace shall be excluded
	# This function is called for apps managed by the test script as well as for prestarted apps.
	# args: -
	__HTTPPROXY_statisics_setup() {
	if [ $RUNMODE == "KUBE" ]; then
	echo "HTTPPROXY $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE"
	else
	echo "HTTPPROXY $HTTP_PROXY_APP_NAME"
	fi
	}

	#######################################################


	## Access to Http Proxy Receiver
	# Host name may be changed if app started by kube
	# Direct access from script
	HTTP_PROXY_HTTPX="http"
	HTTP_PROXY_HOST_NAME=$LOCALHOST_NAME
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT

	#########################
	### Http Proxy functions
	#########################

	# All calls to httpproxy will be directed to the http interface
	# args: -
	# (Function for test scripts)
	use_http_proxy_http() {
	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD"
	HTTP_PROXY_HTTPX="http"
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_PORT

	echo ""
	}

	# All calls to httpproxy will be directed to the https interface
	# args: -
	# (Function for test scripts)
	use_http_proxy_https() {
	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD https $EBOLD"
	HTTP_PROXY_HTTPX="https"
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_SECURE_PORT

	echo ""
	}

	# Start the Http Proxy in the simulator group
	# args: -
	# (Function for test scripts)
	start_http_proxy() {

	echo -e $BOLD"Starting $HTTP_PROXY_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

	# Check if app shall be fully managed by the test script
	__check_included_image "HTTPPROXY"
	retcode_i=$?

	# Check if app shall only be used by the testscipt
	__check_prestarted_image "HTTPPROXY"
	retcode_p=$?

	if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
	echo -e $RED"The $HTTP_PROXY_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
	echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
	exit
	fi
	if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
	echo -e $RED"The $HTTP_PROXY_APP_NAME app is included both as managed and prestarted in this test script"$ERED
	echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
	exit
	fi

	# Check if app shall be used - not managed - by the test script
	if [ $retcode_p -eq 0 ]; then
	echo -e " Using existing $HTTP_PROXY_APP_NAME deployment and service"
	echo " Setting HTTPPROXY replicas=1"
	__kube_scale deployment $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE 1
	fi

	if [ $retcode_i -eq 0 ]; then
	echo -e " Creating $HTTP_PROXY_APP_NAME deployment and service"
	export HTTP_PROXY_APP_NAME

	export HTTP_PROXY_WEB_EXTERNAL_PORT
	export HTTP_PROXY_WEB_INTERNAL_PORT
	export HTTP_PROXY_EXTERNAL_PORT
	export HTTP_PROXY_INTERNAL_PORT

	export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
	export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
	export HTTP_PROXY_EXTERNAL_SECURE_PORT
	export HTTP_PROXY_INTERNAL_SECURE_PORT

	export KUBE_SIM_NAMESPACE
	export HTTP_PROXY_IMAGE

	__kube_create_namespace $KUBE_SIM_NAMESPACE

	# Create service
	input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"svc.yaml
	output_yaml=$PWD/tmp/proxy_svc.yaml
	__kube_create_instance service $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

	# Create app
	input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"app.yaml
	output_yaml=$PWD/tmp/proxy_app.yaml
	__kube_create_instance app $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

	fi

	echo " Retrieving host and ports for service..."
	HTTP_PROXY_HOST_NAME=$(__kube_get_service_host $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE)
	HTTP_PROXY_WEB_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")
	HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "webs")

	HTTP_PROXY_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")
	HTTP_PROXY_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "https")

	if [ $HTTP_PROXY_HTTPX == "http" ]; then
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT
	HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_PORT
	HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

	echo " Host IP, http port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_PORT"
	else
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
	HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_SECURE_PORT
	HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

	echo " Host IP, https port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT"
	fi

	__check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

	else
	# Check if docker app shall be fully managed by the test script
	__check_included_image 'HTTPPROXY'
	if [ $? -eq 1 ]; then
	echo -e $RED"The Http Proxy app is not included in this test script"$ERED
	echo -e $RED"The Http Proxy will not be started"$ERED
	exit
	fi

	export HTTP_PROXY_APP_NAME
	export HTTP_PROXY_EXTERNAL_PORT
	export HTTP_PROXY_INTERNAL_PORT
	export HTTP_PROXY_EXTERNAL_SECURE_PORT
	export HTTP_PROXY_INTERNAL_SECURE_PORT
	export HTTP_PROXY_WEB_EXTERNAL_PORT
	export HTTP_PROXY_WEB_INTERNAL_PORT
	export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
	export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
	export DOCKER_SIM_NWNAME

	export HTTP_PROXY_DISPLAY_NAME

	__start_container $HTTP_PROXY_COMPOSE_DIR "" NODOCKERARGS 1 $HTTP_PROXY_APP_NAME

	if [ $HTTP_PROXY_HTTPX == "http" ]; then
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_PORT
	else
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
	fi
	__check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

	if [ $HTTP_PROXY_HTTPX == "http" ]; then
	HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_PORT
	else
	HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_SECURE_PORT
	fi
	HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME

	fi
	echo ""
	}