Introduction

This dir contains most scripts needed for the auto-test environment. There are scripts with functions to adapt to the apis of the components of the Non-RT RIC; Policy Agent, A1 Controller and Ric (A1) simulator. The test environment supports both test with docker and kubernetes(still experimental) Some of the scripts can also be used for other kinds of tests, for example basic tests.

Overview for common test scripts and files

agent_api_functions.sh
Contains functions for adapting towards the Policy Management Service (PMS) API, also via dmaap (using a message-router stub interface)

api_curl.sh
A common curl based function for the agent and ecs apis. Also partly used for the Callback receiver and RAPP Catalogue apis.

clean-kube.sh
Cleans all services, deployments, pods, replica set etc started by the test environment in kubernetes.

compare_json.py
A python script to compare two json obects for equality. Note that the comparsion always sort json-arrays before comparing (that is, it does not care about the order of items within the array). In addition, the target json object may specify individual parameter values where equality is 'dont care'.

consul_cbs_function.sh
Contains functions for managing Consul and CBS as well as create the configuration for the PMS.

control_panel_api_function.sh
Contains functions for managing Control Panel.

controller_api_functions.sh
Contains functions for adaping towards the A1-controller API.

count_json_elements.py
A python script returning the number of items in a json array.

cr_api_functions.sh
Contains functions for adapting towards the Callback receiver for checking received callback event.

create_policies_process.py
A python script to create a batch of policies. The script is intended to run in a number of processes to create policies in parallel.

create_rics_json.py
A python script to create a json file from a formatted string of ric info. Helper for the test enviroment.

delete_policies_process.py
A python script to delete a batch of policies. The script is intended to run in a number of processes to delete policies in parallel.

do_curl_function.sh A script for executing a curl call with a specific url and optional payload. It also compare the response with an expected result in terms of response code and optional returned payload. Intended to be used by test script (for example basic test scripts of other components)

ecs_api_functions.sh
Contains functions for adapting towards the ECS API

extract_sdnc_reply.py
A python script to extract the information from an sdnc (A1 Controller) reply json. Helper for the test environment.

gateway_api_functions.sh
Contains functions for managing the Non-RT RIC Gateway

http_proxy_api_functions.sh
Contains functions for managing the Http Proxy

kube_proxy_api_functions.sh
Contains functions for managing the Kube Proxy - to gain access to all services pod inside a kube cluster.

mr_api_functions.sh
Contains functions for managing the MR Stub and the Dmaap Message Router

prodstub_api_functions.sh
Contains functions for adapting towards the Producer stub interface - simulates a producer.

rapp_catalogue_api_functions.sh
Contains functions for adapting towards the RAPP Catalogue.

ricsimulator_api_functions.sh
Contains functions for adapting towards the RIC (A1) simulator admin API.

test_env*.sh
Common env variables for test in the auto-test dir. All configuration of port numbers, image names and version etc shall be made in this file. Used by the auto test scripts/suites but could be used for other test script as well. The test cases shall be started with the file for the intended target using command line argument '--env-file'.

testcase_common.sh
Common functions for auto test cases in the auto-test dir. This script is the foundation of test auto environment which sets up images and enviroment variables needed by this script as well as the script adapting to the APIs. The included functions are described in detail further below.

testsuite_common.sh
Common functions for running two or more auto test scripts as a suite.

Integration of a new applicaton

Integration a new application to the test environment involves the following steps.

Choose a short name for the application. Should be a uppcase name. For example, the NonRTRIC Gateway has NGW as short name. This short name shall be added to the testengine_config.sh. See that file for detailed instructions.
Create a file in this directory using the pattern <application-name>_api_functions.sh. This file must implement the following functions used by the test engine. Note that functions must include the application short name in the function name. If the application does not run in kubernetes, then the last three functions in the list can be omitted.

Function
__<app-short_name>_imagesetup
__<app-short_name>_imagepull
__<app-short_name>_imagebuild
__<app-short_name>_image_data
__<app-short_name>_kube_scale_zero
__<app-short_name>_kube_scale_zero_and_wait
__<app-short_name>_kube_delete_all

In addition, all other functions used for testing of the application shall also be added to the file. For example functions to start the application, setting interface parameters as well as functions to send rest call towards the api of the application and validating the result.

Add the application variables to api_curl.sh. This file contains a generic function to make rest calls to an api. It also supports switching betweeen direct rest calls or rest calls via messsage router.
Create a directory beneath in the simulator-group dir. This new directory shall contain docker-compose files, config files (with or without variable substitutions) and kubernetes resource files.

All docker-compose files and all kubernetes resource files need to defined special lables. These lables are used by the test enginge to identify containers and resources started and used by the test engine.

Label for docker compose	Description
nrttest_app	shall contain the application short name
nrttest_dp	shall be set by a variable containing the display name, a short textual description of the applicaion

Label for kubernetes resource	Description
autotest	shall contain the application short name

Add mandatory image(s) and image tag(s) to the appropriate environment files for each release in the file(s) test_env_<system>-<release-name>. In addition, all other needed environment shall also be defined in these file.

Description of functions in testcase_common.sh

Script args

The script can be started with these arguments

arg list
`remote\|remote-remove docker\|kube --env-file <environment-filename> [release] [auto-clean] [--stop-at-error] [--ricsim-prefix <prefix> ] [--use-local-image <app-nam>+] [--use-snapshot-image <app-nam>+] [--use-staging-image <app-nam>+] [--use-release-image <app-nam>+] [--image-repo <repo-address>] [--repo-policy local\|remote] [--cluster-timeout <timeout-in-seconds>] [--print-stats]`

parameter	description
`remote`	Use images from remote repositories. Can be overridden for individual images using the '--use_xxx' flags
`remote-remove`	Same as 'remote' but will also try to pull fresh images from remote repositories
`docker`	Use docker environment for test
`kuber`	Use kubernetes environment for test. Requires a kubernetes minikube installation
`--env-file`	The script will use the supplied file to read environment variables from
`release`	If this flag is given the script will use release version of the images
`auto-clean`	If the function 'auto_clean_containers' is present in the end of the test script then all containers will be stopped and removed. If 'auto-clean' is not given then the function has no effect
`--stop-at-error`	The script will stop when the first failed test or configuration
`--ricsim-prefix <prefix>`	The a1 simulator will use the supplied string as container prefix instead of 'ricsim'. Note that the testscript has to read and use the env var `$RIC_SIM_PREFIX` instead of a hardcoded name of the ric(s).
`--use-local-image`	The script will use local images for the supplied apps, space separated list of app short names
`--use-snapshot-image`	The script will use images from the nexus snapshot repo for the supplied apps, space separated list of app short names
`--use-staging-image`	The script will use images from the nexus staging repo for the supplied apps, space separated list of app short names
`--use-release-image`	The script will use images from the nexus release repo for the supplied apps, space separated list of app short names
`--image-repo`	Url to optional image repo. Only locally built images will be re-tagged and pushed to this repo
`-repo-policy`	Policy controlling which images to re-tag and push to image repo in param --image-repo. Can be set to 'local' (push on locally built images) or 'remote' (push locally built images and images from nexus repo). Default is 'local'
`--cluster-timeout`	Optional timeout for cluster where it takes time to obtain external ip/host-name. Timeout in seconds
`--print-stats`	Prints the number of tests, failed tests, failed configuration and deviations after each individual test or config
`help`	Print this info along with the test script description and the list of app short names supported

Function: setup_testenvironment

Function: indent1

Function: indent2

Function: print_result

Function: start_timer

Start a timer for time measurement. Only one timer can be running. | arg list | |--| | None - but any args will be printed (It is good practice to use same args for this function as for the print_timer) |

Function: print_timer

Print the value of the timer (in seconds) previously started by 'start_timer'. (Note that timer is still running after this function). The result of the timer as well as the args to the function will also be printed in the test report. | arg list | |--| | <timer-message-to-print> |

parameter	description
`<timer-message-to-print>`	Any text message to be printed along with the timer result.(It is good practice to use same args for this function as for the `start_timer`)

Function: print_and_reset_timer

Print the value of the timer (in seconds) previously started by 'start_timer'. Also reset the timer to 0. The result of the timer as well as the args to the function will also be printed in the test report. | arg list | |--| | <timer-message-to-print> |

parameter	description
`<timer-message-to-print>`	Any text message to be printed along with the timer result.(It is good practice to use same args for this function as for the `start_timer`)

Function: deviation

parameter	description
`<deviation-message-to-print>`	Any text message describing the deviation. The text will also be printed in the test report. The intention is to mark known deviations, compared to required functionality

Function: clean_environment

Stop and remove all containers (docker) or resources (kubernetes). Containers not part of the test are not affected (docker only). Removes all resources started by previous kube tests (kube only). | arg list | |--| | None |

Function: auto_clean_containers

Same function as 'clean_environment'. This function has effect only if the test script is started with arg auto-clean. This intention is to use this function as the last step in an auto-test script. | arg list | |--| | None |

Function: sleep_wait

parameter	description
`<sleep-time-in-sec>`	Number of seconds to sleep
`<any-text-in-quotes-to-be-printed>`	Optional. The text will be printed, if present

Function: check_control_panel_logs

Function: store_logs

Take a snap-shot of all logs for all running containers and stores them in ./logs/<ATC-id>. All logs will get the specified prefix in the file name. In general, one of the last steps in an auto-test script shall be to call this function. If logs shall be taken several times during a test script, different prefixes shall be used each time. | arg list | |--| | <logfile-prefix> |

parameter	description
`<logfile-prefix>`	Log file prefix

Description of functions in testsuite_common.sh

Function: suite_setup

suite_complete

Description of functions in agent_api_functions.sh

General

Both PMS version 1 and 2 are supported. The version is controlled by the env variable $PMS_VERSION set in the test env file. For api function in version 2, an url prefix is added if configured.

Function: use_agent_rest_http

Function: use_agent_rest_https

Function: use_agent_dmaap_http

Function: use_agent_dmaap_https

Function: start_policy_agent

parameter	description
`PROXY`	Configure with http proxy, if proxy is started
`NOPROXY`	Configure without http proxy
`<config-file>`	Path to application.yaml
`<data-file>`	Optional path to application_configuration.json

Function: agent_load_config

parameter	description
`<data-file>`	Path to application_configuration.json

Function: set_agent_debug

Function: set_agent_trace

Function: use_agent_retries

Function: check_policy_agent_logs

Function: api_equal()

Tests if the array length of a json array in the Policy Agent simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the array length is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the array length becomes equal to the target value or not. See the 'cr' dir for more details.

arg list
`<variable-name> <target-value> [ <timeout-in-sec> ]`

parameter	description
`<variable-name>`	Relative url. Example 'json:policy_types' - checks the json array length of the url /policy_types
`<target-value>`	Target value for the length
`<timeout-in-sec>`	Max time to wait for the length to reach the target value

Function: api_get_policies()

Test of GET '/policies' or V2 GET '/v2/policy-instances' and optional check of the array of returned policies. To test the response code only, provide the response code parameter as well as the following three parameters. To also test the response payload add the 'NOID' for an expected empty array or repeat the last five/seven parameters for each expected policy.

arg list
`<response-code> <ric-id>\|NORIC <service-id>\|NOSERVICE <policy-type-id>\|NOTYPE [ NOID \| [<policy-id> <ric-id> <service-id> EMPTY\|<policy-type-id> <template-file>]*]`

arg list V2
`<response-code> <ric-id>\|NORIC <service-id>\|NOSERVICE <policy-type-id>\|NOTYPE [ NOID \| [<policy-id> <ric-id> <service-id> EMPTY\|<policy-type-id> <transient> <notification-url> <template-file>]*]`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`NORIC`	Indicator that no ric is provided
`<service-id>`	Id of the service
`NOSERVICE`	Indicator that no service id is provided
`<policy-type-id>`	Id of the policy type
`NOTYPE`	Indicator that no type id is provided
`NOID`	Indicator that no policy id is provided - indicate empty list of policies
`<policy-id>`	Id of the policy
`EMPTY`	Indicate for the special empty policy type
`transient`	Transient, true or false
`notification-url`	Url for notifications
`<template-file>`	Path to the template file for the policy (same template used when creating the policy)

Function: api_get_policy()

Test of GET '/policy' or V2 GET '/v2/policies/{policy_id}' and optional check of the returned json payload. To test the the response code only, provide the expected response code and policy id. To test the contents of the returned json payload, add a path to the template file used when creating the policy.

arg list
`<response-code> <policy-id> [<template-file>]`

arg list V2
`<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>\|NOTYPE <transient> <notification-url>\|NOURL ]`

parameter	description
`<response-code>`	Expected http response code
`<policy-id>`	Id of the policy
`<template-file>`	Path to the template file for the policy (same template used when creating the policy)
`<service-id>`	Id of the service
`<ric-id>`	Id of the ric
`<policy-type-id>`	Id of the policy type
`NOTYPE`	Indicator that no type id is provided
`transient`	Transient, true or false
`notification-url`	Url for notifications

Function: api_put_policy()

Test of PUT '/policy' or V2 PUT '/policies'. If more than one policy shall be created, add a count value to indicate the number of policies to create. Note that if more than one policy shall be created the provided policy-id must be numerical (will be used as the starting id).

arg list
`<response-code> <service-name> <ric-id> <policytype-id> <policy-id> <transient> <template-file> [<count>]`

arg list V2
`<response-code> <service-name> <ric-id> <policytype-id>\|NOTYPE <policy-id> <transient>\|NOTRANSIENT <notification-url>\|NOURL <template-file> [<count>]`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service
`<ric-id>`	Id of the ric
`<policy-type-id>`	Id of the policy type
`<policy-id>`	Id of the policy. This value shall be a numeric value if more than one policy shall be created
`transient>`	Transient 'true' or 'false'. 'NOTRANSIENT' can be used to indicate using the default value (no transient value provided)
`notification-url`	Url for notifications
`NOURL`	Indicator for no url
`<template-file>`	Path to the template file for the policy
`<count>`	An optional count (default is 1). If a value greater than 1 is given, the policy ids will use the given policy id as the first id and add 1 to that id for each new policy

Function: api_put_policy_batch()

This tests the same as function 'api_put_policy' except that all put requests are sent to dmaap in one go and then the responses are polled one by one. If the agent api is not configured to use dmaap (see 'use_agent_dmaap', 'use_agent_rest_http' and 'use_agent_rest_https'), an error message is printed. For arg list and parameters, see 'api_put_policy'.

Function: api_put_policy_parallel()

This tests the same as function 'api_put_policy' except that the policy create is spread out over a number of processes and it only uses the agent rest API. The total number of policies created is determined by the product of the parameters 'number-of-rics' and 'count'. The parameter 'number-of-threads' shall be selected to be not evenly divisible by the product of the parameters 'number-of-rics' and 'count' - this is to ensure that one process does not handle the creation of all the policies in one ric.

arg list
`<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>`

arg list
`<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>\|NOURL <template-file> <count-per-ric> <number-of-threads>`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service
`<ric-id-base>`	The base id of the rics, ie ric id without the sequence number. The sequence number is added during processing
`<number-of-rics>`	The number of rics, assuming the first index is '1'. The index is added to the 'ric-id-base' id
`<policy-type-id>`	Id of the policy type
`<policy-start-id>`	Id of the policy. This value shall be a numeric value and will be the id of the first policy
`transient>`	Transient 'true' or 'false'. 'NOTRANSIENT' can be used to indicate using the default value (no transient value provide)
`notification-url`	Url for notifications
`<template-file>`	Path to the template file for the policy
`<count-per-ric>`	Number of policies per ric
`<number-of-threads>`	Number of threads (processes) to run in parallel

Function: api_delete_policy()

This tests the DELETE '/policy' or V2 DELETE '/v2/policies/{policy_id}'. Removes the indicated policy or a 'count' number of policies starting with 'policy-id' as the first id.

arg list
`<response-code> <policy-id> [<count>]`

parameter	description
`<response-code>`	Expected http response code
`<policy-id>`	Id of the policy
`<count>`	An optional count of policies to delete. The 'policy-id' will be the first id to be deleted.

Function: api_delete_policy_batch()

This tests the same as function 'api_delete_policy' except that all delete requests are sent to dmaap in one go and then the responses are polled one by one. If the agent api is not configured to used dmaap (see 'use_agent_dmaap', 'use_agent_rest_http' and 'use_agent_rest_https'), an error message is printed. For arg list and parameters, see 'api_delete_policy'.

Function: api_delete_policy_parallel()

This tests the same as function 'api_delete_policy' except that the policy delete is spread out over a number of processes and it only uses the agent rest API. The total number of policies deleted is determined by the product of the parameters 'number-of-rics' and 'count'. The parameter 'number-of-threads' shall be selected to be not evenly divisible by the product of the parameters 'number-of-rics' and 'count' - this is to ensure that one process does not handle the deletion of all the policies in one ric.

arg list
`<response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>`

parameter	description
`<response-code>`	Expected http response code
`<ric-id-base>`	The base id of the rics, ie ric id without the sequence number. The sequence number is added during processing
`<number-of-rics>`	The number of rics, assuming the first index is '1'
`<policy-start-id>`	Id of the policy. This value shall be a numeric value and will be the id of the first policy
`<count-per-ric>`	Number of policies per ric
`<number-of-threads>`	Number of threads (processes) to run in parallel

Function: api_get_policy_ids()

Test of GET '/policy_ids' or V2 GET '/v2/policies'. To test response code only, provide the response code parameter as well as the following three parameters. To also test the response payload add the 'NOID' for an expected empty array or repeat the 'policy-instance-id' for each expected policy id.

arg list
`<response-code> <ric-id>\|NORIC <service-id>\|NOSERVICE <type-id>\|NOTYPE ([<policy-instance-id]*\|NOID)`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`NORIC`	Indicator that no ric is provided
`<service-id>`	Id of the service
`NOSERVICE`	Indicator that no service id is provided
`type-id>`	Id of the policy type
`NOTYPE`	Indicator that no type id is provided
`NOID`	Indicator that no policy id is provided - indicate empty list of policies
`<policy-instance-id>`	Id of the policy

Function: api_get_policy_schema()

Test of V2 GET '/v2/policy-types/{policyTypeId}' and optional check of the returned json schema. To test the response code only, provide the expected response code and policy type id. To test the contents of the returned json schema, add a path to a schema file to compare with.

arg list
`<response-code> <policy-type-id> [<schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<policy-type-id>`	Id of the policy type
`<schema-file>`	Path to the schema file for the policy type

Function: api_get_policy_schema()

Test of GET '/policy_schema' and optional check of the returned json schema. To test the response code only, provide the expected response code and policy type id. To test the contents of the returned json schema, add a path to a schema file to compare with.

arg list
`<response-code> <policy-type-id> [<schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<policy-type-id>`	Id of the policy type
`<schema-file>`	Path to the schema file for the policy type

Function: api_get_policy_schemas()

Test of GET '/policy_schemas' and optional check of the returned json schemas. To test the response code only, provide the expected response code and ric id (or NORIC if no ric is given). To test the contents of the returned json schema, add a path to a schema file to compare with (or NOFILE to represent an empty '{}' type)

arg list
`<response-code> <ric-id>\|NORIC [<schema-file>\|NOFILE]*`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`NORIC`	No ric id given
`<schema-file>`	Path to the schema file for the policy type
`NOFILE`	Indicate the template for an empty type

Function: api_get_policy_status()

Test of GET '/policy_status' or V2 GET '/policies/{policy_id}/status'.

arg list
`<response-code> <policy-id> (STD\|STD2 <enforce-status>\|EMPTY [<reason>\|EMPTY])\|(OSC <instance-status> <has-been-deleted>)`

parameter	description
`<response-code>`	Expected http response code
`<policy-id>`	Id of the policy
`STD`	Indicator of status of Standarized A1
`STD2`	Indicator of status of Standarized A1 version 2
`<enforce-status>`	Enforcement status
`<reason>`	Optional reason
`EMPTY`	Indicator of empty string status or reason
`OSC`	Indicator of status of Non-Standarized OSC A1
`<instance-status>`	Instance status
`<has-been-deleted>`	Deleted status, true or false

Function: api_get_policy_types()

Test of GET '/policy_types' or V2 GET '/v2/policy-types' and optional check of the returned ids. To test the response code only, provide the expected response code and ric id (or NORIC if no ric is given). To test the contents of the returned json payload, add the list of expected policy type id (or 'EMPTY' for the '{}' type)

arg list
`<response-code> [<ric-id>\|NORIC [<policy-type-id>\|EMPTY [<policy-type-id>]*]]`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`NORIC`	No ric id given
`<policy-type-id>`	Id of the policy type
`EMPTY`	Indicate the empty type

Function: api_get_status()

Test of GET /status or V2 GET /status

arg list
`<response-code>`

parameter	description
`<response-code>`	Expected http response code

Function: api_get_ric()

Test of GET '/ric' or V2 GET '/v2/rics/ric' To test the response code only, provide the expected response code and managed element id. To test the returned ric id, provide the expected ric id.

arg list
`<reponse-code> <managed-element-id> [<ric-id>]`

arg list V2
`<reponse-code> <management-element-id>\|NOME <ric-id>\|<NORIC> [<string-of-ricinfo>]`

parameter	description
`<response-code>`	Expected http response code
`<managed-element-id>`	Id of the managed element
`NOME`	Indicator for no ME
`ric-id`	Id of the ric
`NORIC`	Indicator no RIC
`string-of-ricinfo`	String of ric info

Function: api_get_rics()

Test of GET '/rics' or V2 GET '/v2/rics' and optional check of the returned json payload (ricinfo). To test the response code only, provide the expected response code and policy type id (or NOTYPE if no type is given). To test also the returned payload, add the formatted string of info in the returned payload. Format of ricinfo:
<ric-id>:<list-of-mes>:<list-of-policy-type-ids>
Example
<space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........."

arg list
`<reponse-code> <policy-type-id>\|NOTYPE [<space-separate-string-of-ricinfo>]`

parameter	description
`<response-code>`	Expected http response code
`<policy-type-id>`	Policy type id of the ric
`NOTYPE>`	No type given
`<space-separate-string-of-ricinfo>`	A space separated string of ric info - needs to be quoted

Function: api_put_service()

parameter	description
`<response-code>`	Expected http response code
`<service-name>`	Service name
`<keepalive-timeout>`	Timeout value
`<callbackurl>`	Callback url

Function: api_get_services()

Test of GET '/service' or V2 GET '/v2/services' and optional check of the returned json payload. To test only the response code, omit all parameters except the expected response code. To test the returned json, provide the parameters after the response code.

arg list
`<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) \| (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]`

parameter	description
`<response-code>`	Expected http response code
`<query-service-name>`	Service name for the query
`<target-service-name>`	Target service name
`<keepalive-timeout>`	Timeout value
`<callbackurl>`	Callback url
`NOSERVICE`	Indicator of no target service name

Function: api_get_service_ids()

Test of GET '/services' or V2 GET /'v2/services'. Only check of service ids.

arg list
`<response-code> [<service-name>]*`

parameter	description
`<response-code>`	Expected http response code
`<service-name>`	Service name

Function: api_delete_services()

Test of DELETE '/services' or V2 DELETE '/v2/services/{serviceId}'

arg list
`<response-code> [<service-name>]*`

parameter	description
`<response-code>`	Expected http response code
`<service-name>`	Service name

Function: api_put_services_keepalive()

Test of PUT '/services/keepalive' or V2 PUT '/v2/services/{service_id}/keepalive'

arg list
`<response-code> <service-name>`

parameter	description
`<response-code>`	Expected http response code
`<service-name>`	Service name

Function: api_put_configuration()

Test of PUT '/v2/configuration'

arg list
`<response-code> <config-file>`

parameter	description
`<response-code>`	Expected http response code
`<config-file>`	Path json config file

Function: api_get_configuration()

Test of GET '/v2/configuration'

arg list
`<response-code> [<config-file>]`

parameter	description
`<response-code>`	Expected http response code
`<config-file>`	Path json config file to compare the retrieved config with

Description of functions in consul_cbs_function.sh

Function: consul_config_app

Function to load a json config from a file into consul for the Policy Agent

arg list
`<json-config-file>`

parameter	description
`<json-config-file>`	The path to the json file to be loaded to Consul/CBS

Function: prepare_consul_config

Function to prepare a Consul config based on the previously configured (and started simulators). Note that all simulator must be running and the test script has to configure if http or https shall be used for the components (this is done by the functions 'use_simulator_http', 'use_simulator_https', 'use_sdnc_http', 'use_sdnc_https', 'use_mr_http', 'use_mr_https') | arg list | |--| | <deviation-message-to-print> |

parameter	description
`SDNC\|NOSDNC`	Configure based on a1-controller (SNDC) or without a controller/adapter (NOSDNC)
`<output-file>`	The path to the json output file containing the prepared config. This file is used in 'consul_config_app'

Function: start_consul_cbs

Description of functions in control_panel_api_function.sh

Function: use_control_panel_http

Function: use_control_panel_https

Function: start_control_panel

Description of functions in controller_api_functions.sh

The file contains a selection of the possible API tests towards the a1-controller

Function: use_sdnc_http

Use http for all API calls towards the SDNC A1 Controller. This is the default. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_sdnc_https

Function: start_sdnc

Function: check_sdnc_logs

Function: controller_api_get_A1_policy_ids

Test of GET policy ids towards OSC or STD type simulator. To test response code only, provide the response code, 'OSC' + policy type or 'STD' To test the response payload, include the ids of the expexted response.

arg list
`<response-code> (OSC <ric-id> <policy-type-id> [ <policy-id> [<policy-id>]* ]) \| ( STD <ric-id> [ <policy-id> [<policy-id>]* ]`

parameter	description
`<response-code>`	Expected http response code
`OSC`	Indicator of status of Non-Standarized OSC A1
`<ric-id>`	Id of the ric
`policy-type-id>`	Id of the policy type
`<policy-id>`	Id of the policy
`STD`	Indicator of status of Standarized A1

Function: controller_api_get_A1_policy_type

Test of GET a policy type (OSC only)

arg list
`<response-code> OSC <ric-id> <policy-type-id> [<policy-type-file>]`

parameter	description
`<response-code>`	Expected http response code
`OSC`	Indicator of status of Non-Standarized OSC A1
`<ric-id>`	Id of the ric
`policy-type-id>`	Id of the policy type
`policy-type-file>`	Optional schema file to compare the returned type with

Function: controller_api_delete_A1_policy

Deletes a policy instance

arg list
`(STD <ric-id> <policy-id>) \| (OSC <ric-id> <policy-type-id> <policy-id>)`

parameter	description
`<response-code>`	Expected http response code
`STD`	Indicator of status of Standarized A1
`<ric-id>`	Id of the ric
`<policy-id>`	Id of the policy
`policy-type-id>`	Id of the policy type
`OSC`	Indicator of status of Non-Standarized OSC A1
`policy-type-file>`	Optional schema file to compare the returned type with

Function: controller_api_put_A1_policy

Creates a policy instance

arg list
`<response-code> (STD <ric-id> <policy-id> <template-file> ) \| (OSC <ric-id> <policy-type-id> <policy-id> <template-file>)`

parameter	description
`<response-code>`	Expected http response code
`STD`	Indicator of status of Standarized A1
`<ric-id>`	Id of the ric
`<policy-id>`	Id of the policy
`<template-file>`	Path to the template file of the policy
`OSC`	Indicator of status of Non-Standarized OSC A1
`<policy-type-id>`	Id of the policy type

Function: controller_api_get_A1_policy_status

Checks the status of a policy

arg list
`<response-code> (STD <ric-id> <policy-id> <enforce-status> [<reason>]) \| (OSC <ric-id> <policy-type-id> <policy-id> <instance-status> <has-been-deleted>)`

parameter	description
`<response-code>`	Expected http response code
`STD`	Indicator of status of Standarized A1
`<ric-id>`	Id of the ric
`<policy-id>`	Id of the policy
`<enforce-status>`	Enforcement status
`<reason>`	Optional reason
`OSC`	Indicator of status of Non-Standarized OSC A1
`<policy-type-id>`	Id of the policy type
`<instance-status>`	Instance status
`<has-been-deleted>`	Deleted status, true or false

Description of functions in cr_api_functions.sh

Function: use_cr_http

Function: use_cr_https

Function: start_cr

Function: cr_equal

Tests if a variable value in the Callback Receiver (CR) simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'cr' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameter	description
`<variable-name>`	Variable name in the CR
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: cr_api_check_all_sync_events()

Check the contents of all ric events received for a callback id.

arg list
`<response-code> <id> [ EMPTY \| ( <ric-id> )+ ]`

parameter	description
`<response-code>`	Expected http response code
`<id>`	Id of the callback destination
`EMPTY`	Indicator for an empty list
`<ric-id>`	Id of the ric

Function: cr_api_check_all_ecs_events()

Check the contents of all current status events for one id from ECS

arg list
`<response-code> <id> [ EMPTY \| ( <status> )+ ]`

parameter	description
`<response-code>`	Expected http response code
`<id>`	Id of the callback destination
`EMPTY`	Indicator for an empty list
`<status>`	Status string

Function: cr_api_check_all_ecs_subscription_events()

Check the contents of all current subscription events for one id from ECS

arg list
` [ EMPTY

parameter	description
`<response-code>`	Expected http response code
`<id>`	Id of the callback destination
`EMPTY`	Indicator for an empty list
`<type-id>`	Id of the data type
`<schema>`	Path to typeschema file
`<registration-status>`	Status string

Function: cr_api_reset()

Reset the callback receiver

arg list
-

Description of functions in ecs_api_functions.sh

Function: use_ecs_rest_http

Function: use_ecs_rest_https

Function: use_ecs_dmaap_http

Function: use_ecs_dmaap_https

Function: start_ecs

Function: stop_ecs

Function: start_stopped_ecs

Function: set_ecs_debug

Function: set_ecs_trace

Function: check_ecs_logs

Function: ecs_equal

Tests if a variable value in the ECS is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'a1-interface' repo for more details.

arg list
`<variable-name> <target-value> [ <timeout-in-sec> ]`

parameter	description
`<variable-name>`	Variable name in ecs
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: ecs_api_a1_get_job_ids()

Test of GET '/A1-EI/v1/eitypes/{eiTypeId}/eijobs' and optional check of the array of returned job ids. To test the response code only, provide the response code parameter as well as a type id and an owner id. To also test the response payload add the 'EMPTY' for an expected empty array or repeat the last parameter for each expected job id.

arg list
`<response-code> <type-id> <owner-id>\|NOOWNER [ EMPTY \| <job-id>+ ]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<owner-id>`	Id of the job owner
`NOOWNER`	No owner is given
`<job-id>`	Id of the expected job
`EMPTY`	The expected list of job id shall be empty

Function: ecs_api_a1_get_type()

Test of GET '/A1-EI/v1/eitypes/{eiTypeId}' and optional check of the returned schema. To test the response code only, provide the response code parameter as well as the type-id. To also test the response payload add a path to the expected schema file.

arg list
`<response-code> <type-id> [<schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<schema-file>`	Path to a schema file to compare with the returned schema

Function: ecs_api_a1_get_type_ids()

Test of GET '/A1-EI/v1/eitypes' and optional check of returned list of type ids. To test the response code only, provide the response only. To also test the response payload add the list of expected type ids (or EMPTY if the list is expected to be empty).

arg list
`<response-code> [ (EMPTY \| [<type-id>]+) ]`

parameter	description
`<response-code>`	Expected http response code
`EMPTY`	The expected list of type ids shall be empty
`<type-id>`	Id of the EI type

Function: ecs_api_a1_get_job_status()

Test of GET '/A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}/status' and optional check of the returned status. To test the response code only, provide the response code, type id and job id. To also test the response payload add the expected status.

arg list
`<response-code> <type-id> <job-id> [<status>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<job-id>`	Id of the job
`<status>`	Expected status

Function: ecs_api_a1_get_job()

Test of GET '/A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}' and optional check of the returned job. To test the response code only, provide the response code, type id and job id. To also test the response payload add the remaining parameters.

arg list
`<response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<job-id>`	Id of the job
`<target-url>`	Expected target url for the job
`<owner-id>`	Expected owner for the job
`<template-job-file>`	Path to a job template for job parameters of the job

Function: ecs_api_a1_delete_job()

Test of DELETE '/A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}'. To test, provide all the specified parameters.

arg list
`<response-code> <type-id> <job-id>`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<job-id>`	Id of the job

Function: ecs_api_a1_put_job()

Test of PUT '/A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}'. To test, provide all the specified parameters.

arg list
`<response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file>`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the EI type
`<job-id>`	Id of the job
`<target-url>`	Target url for the job
`<owner-id>`	Owner of the job
`<template-job-file>`	Path to a job template for job parameters of the job

Function: ecs_api_edp_get_type_ids()

Test of GET '/ei-producer/v1/eitypes' or '/data-producer/v1/info-types' depending on ecs version and an optional check of the returned list of type ids. To test the response code only, provide the response code. To also test the response payload add list of expected type ids (or EMPTY if the list is expected to be empty).

arg list
`<response-code> [ EMPTY \| <type-id>+]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_get_producer_status()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}/status' or '/data-producer/v1/info-producers/{infoProducerId}/status' depending on ecs version and optional check of the returned status. To test the response code only, provide the response code and producer id. To also test the response payload add the expected status.

arg list
`<response-code> <producer-id> [<status>]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<status>`	The expected status string

Function: ecs_api_edp_get_producer_ids()

Test of GET '/ei-producer/v1/eiproducers' and optional check of the returned producer ids. To test the response code only, provide the response. To also test the response payload add the list of expected producer-ids (or EMPTY if the list of ids is expected to be empty).

arg list
`<response-code> [ EMPTY \| <producer-id>+]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_get_producer_ids_2()

Test of GET '/ei-producer/v1/eiproducers' or '/data-producer/v1/info-producers' depending on ecs version and optional check of the returned producer ids. To test the response code only, provide the response. To also test the response payload add the type (if any) and a list of expected producer-ids (or EMPTY if the list of ids is expected to be empty).

arg list
`<response-code> [ ( NOTYPE \| <type-id> ) [ EMPTY \| <producer-id>+]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`EMPTY`	No type given
`<producer-id>`	Id of the producer
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_get_type()

Test of GET '/ei-producer/v1/eitypes/{eiTypeId}' and optional check of the returned type. To test the response code only, provide the response and the type-id. To also test the response payload add a path to a job schema file and a list expected producer-id (or EMPTY if the list of ids is expected to be empty).

arg list
`<response-code> <type-id> [<job-schema-file> (EMPTY \| [<producer-id>]+)]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`<job-schema-file>`	Path to a job schema file
`<producer-id>`	Id of the producer
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_get_type_2()

Test of GET '/ei-producer/v1/eitypes/{eiTypeId}' or '/data-producer/v1/info-types/{infoTypeId}' depending on ecs version and optional check of the returned type. To test the response code only, provide the response and the type-id. To also test the response payload add a path to a job schema file.

arg list
`<response-code> <type-id> [<job-schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`<job-schema-file>`	Path to a job schema file
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_put_type_2()

Test of PUT '/ei-producer/v1/eitypes/{eiTypeId}' or '/data-producer/v1/info-types/{infoTypeId}' depending on ecs version and optional check of the returned type.

arg list
`<response-code> <type-id> [<job-schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`<job-schema-file>`	Path to a job schema file
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_edp_delete_type_2()

Test of DELETE '/ei-producer/v1/eitypes/{eiTypeId}' or '/data-producer/v1/info-types/{infoTypeId}' depending on ecs version and optional check of the returned type.

arg list
`<response-code> <type-id>`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type

Function: ecs_api_edp_get_producer()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}' and optional check of the returned producer. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters defining thee producer.

arg list
`<response-code> <producer-id> [<create-callback> <delete-callback> <supervision-callback> (EMPTY\| [<type-id> <schema-file>]+) ]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<create-callback>`	Callback for create job
`<delete-callback>`	Callback for delete job
`<supervision-callback>`	Callback for producer supervision
`<type-id>`	Id of the type
`<schema-file>`	Path to a schema file
`EMPTY`	The expected list of type schema pairs shall be empty

Function: ecs_api_edp_get_producer_2()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}' or '/data-producer/v1/info-producers/{infoProducerId}' depending on ecs version and optional check of the returned producer. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters defining thee producer.

arg list
`<response-code> <producer-id> [<job-callback> <supervision-callback> (EMPTY \| <type-id>+) ]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-callback>`	Callback for the url
`<supervision-callback>`	Callback for producer supervision
`<type-id>`	Id of the type
`EMPTY`	The expected list of types shall be empty

Function: ecs_api_edp_delete_producer()

Test of DELETE '/ei-producer/v1/eiproducers/{eiProducerId}' or '/data-producer/v1/info-producers/{infoProducerId}' depending on ecs version. To test, provide all parameters.

arg list
`<response-code> <producer-id>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer

Function: ecs_api_edp_put_producer()

Test of PUT '/ei-producer/v1/eiproducers/{eiProducerId}'. To test, provide all parameters. The list of type/schema pair may be empty.

arg list
`<response-code> <producer-id> <job-callback> <supervision-callback> (EMPTY \| [<type-id> <schema-file>]+)`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-callback>`	Callback for create/delete job
`<supervision-callback>`	Callback for producer supervision
`<type-id>`	Id of the type
`<schema-file>`	Path to a schema file
`EMPTY`	The list of type/schema pairs is empty

Function: ecs_api_edp_put_producer_2()

Test of PUT '/ei-producer/v1/eiproducers/{eiProducerId}' or '/data-producer/v1/info-producers/{infoProducerId}' depending on ecs version. To test, provide all parameters. The list of type/schema pair may be empty.

arg list
`<response-code> <producer-id> <job-callback> <supervision-callback> NOTYPE\|[<type-id>+]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-callback>`	Callback for create/delete job
`<supervision-callback>`	Callback for producer supervision
`<type-id>`	Id of the type
`NOTYPE`	The list of types is empty

Function: ecs_api_edp_get_producer_jobs()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}/eijobs' and optional check of the returned producer job. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters.

arg list
`<response-code> <producer-id> (EMPTY \| [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job
`<type-id>`	Id of the EI type
`<target-url>`	Target url for data delivery
`<job-owner>`	Id of the job owner
`<template-job-file>`	Path to a job template file
`EMPTY`	The list of job/type/target/job-file tuples is empty

Function: ecs_api_edp_get_producer_jobs_2()

Test of GET '/ei-producer/v1/eiproducers/{eiProducerId}/eijobs' or '/data-producer/v1/info-producers/{infoProducerId}/info-jobs' depending on ecs version and optional check of the returned producer job. To test the response code only, provide the response and the producer-id. To also test the response payload add the remaining parameters.

arg list
`<response-code> <producer-id> (EMPTY \| [<job-id> <type-id> <target-url> <job-owner> <template-job-file>]+)`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job
`<type-id>`	Id of the type
`<target-url>`	Target url for data delivery
`<job-owner>`	Id of the job owner
`<template-job-file>`	Path to a job template file
`EMPTY`	The list of job/type/target/job-file tuples is empty

Function: ecs_api_service_status()

Test of GET '/status'.

arg list
`<response-code>`

parameter	description
`<response-code>`	Expected http response code

Function: ecs_api_idc_get_type_ids()

Test of GET '/data-consumer/v1/info-types' and an optional check of the returned list of type ids. To test the response code only, provide the response code. To also test the response payload add list of expected type ids (or EMPTY if the list is expected to be empty).

arg list
`<response-code> [ EMPTY \| <type-id>+]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the Info type
`EMPTY`	The expected list of type ids shall be empty

Function: ecs_api_idc_get_job_ids()

Test of GET '/data-consumer/v1/info-jobs' and optional check of the array of returned job ids. To test the response code only, provide the response code parameter as well as a type id and an owner id. To also test the response payload add the 'EMPTY' for an expected empty array or repeat the last parameter for each expected job id.

arg list
`<response-code> <type-id> <owner-id>\|NOOWNER [ EMPTY \| <job-id>+ ]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the Info type
`<owner-id>`	Id of the job owner
`NOOWNER`	No owner is given
`<job-id>`	Id of the expected job
`EMPTY`	The expected list of job id shall be empty

Function: ecs_api_idc_get_job()

Test of GET '/data-consumer/v1/info-jobs/{infoJobId}' and optional check of the returned job. To test the response code only, provide the response code, type id and job id. To also test the response payload add the remaining parameters.

arg list
`<response-code> <type-id> <job-id> [<target-url> <owner-id> <template-job-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the Info type
`<job-id>`	Id of the job
`<target-url>`	Expected target url for the job
`<owner-id>`	Expected owner for the job
`<template-job-file>`	Path to a job template for job parameters of the job

Function: ecs_api_idc_put_job()

Test of PUT '/data-consumer/v1/info-jobs/{infoJobId}'. To test, provide all the specified parameters.

arg list
`<response-code> <type-id> <job-id> <target-url> <owner-id> <template-job-file> [VALIDATE]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the Info type
`<job-id>`	Id of the job
`<target-url>`	Target url for the job
`<owner-id>`	Owner of the job
`<template-job-file>`	Path to a job template for job parameters of the job
`VALIIDATE`	Indicator to preform type validation at creation

Function: ecs_api_idc_delete_job()

Test of DELETE '/A1-EI/v1/eitypes/{eiTypeId}/eijobs/{eiJobId}'. To test, provide all the specified parameters.

arg list
`<response-code> <type-id> <job-id>`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the type
`<job-id>`	Id of the job

Function: ecs_api_idc_get_type()

Test of GET '/data-consumer/v1/info-types/{infoTypeId} and optional check of the returned schema. To test the response code only, provide the response code parameter as well as the type-id. To also test the response payload add a path to the expected schema file.

arg list
`<response-code> <type-id> [<schema-file>]`

parameter	description
`<response-code>`	Expected http response code
`<type-id>`	Id of the Info type
`<schema-file>`	Path to a schema file to compare with the returned schema

Function: ecs_api_idc_get_job_status()

Test of GET '/data-consumer/v1/info-jobs/{infoJobId}/status' and optional check of the returned status and timeout. To test the response code only, provide the response code and job id. To also test the response payload add the expected status.

arg list
`<response-code> <job-id> [<status> [ <timeout>]]`

parameter	description
`<response-code>`	Expected http response code
`<job-id>`	Id of the job
`<status>`	Expected status
`<timeout>`	Timeout

Function: ecs_api_idc_get_job_status2()

Test of GET '/data-consumer/v1/info-jobs/{infoJobId}/status' with returned producers and optional check of the returned status and timeout. To test the response code only, provide the response code and job id. To also test the response payload add the expected status.

arg list
` [ EMPTYPROD

parameter	description
`<response-code>`	Expected http response code
`<job-id>`	Id of the job
`<status>`	Expected status
`<EMPTYPROD>`	Indicated for empty list of producer
`<prod-count>`	Number of expected producer
`<producer-id>`	Id of the producer
`<timeout>`	Timeout

Function: ecs_api_idc_get_subscription_ids()

Test of GET '/data-consumer/v1/info-type-subscription' with the returned list of subscription ids

arg list
`

parameter	description
`<response-code>`	Expected http response code
`<owner-id>`	Id of the owner
`<NOOWNER>`	Indicator for empty owner
`<EMPTY>`	Indicated for empty list of subscription ids
`<subscription-id>`	Id of the subscription

Function: ecs_api_idc_get_subscription()

Test of GET '/data-consumer/v1/info-type-subscription/{subscriptionId}' with the subscription information

arg list
`<response-code> <subscription-id> [ <owner-id> <status-uri> ]`

parameter	description
`<response-code>`	Expected http response code
`<subscription-id>`	Id of the subscription
`<owner-id>`	Id of the owner
`<status-uri>`	Url for status notifications

Function: ecs_api_idc_put_subscription()

Test of PUT '/data-consumer/v1/info-type-subscription/{subscriptionId}' with the subscription information

arg list
`<response-code> <subscription-id> <owner-id> <status-uri>`

parameter	description
`<response-code>`	Expected http response code
`<subscription-id>`	Id of the subscription
`<owner-id>`	Id of the owner
`<status-uri>`	Url for status notifications

Function: ecs_api_idc_delete_subscription()

Test of DELETE /data-consumer/v1/info-type-subscription/{subscriptionId}

arg list
`<response-code> <subscription-id>`

parameter	description
`<response-code>`	Expected http response code
`<subscription-id>`	Id of the subscription

Function: ecs_api_admin_reset()

Test of GET '/status'.

arg list
`<response-code> [ <type> ]`

parameter	description
`<response-code>`	Expected http response code
`<type>`	Type id, if the interface supports type in url

Description of functions in gateway_api_functions.sh

Function: use_gateway_http

Function: use_gateway_https

Function: set_gateway_debug

Function: set_gateway_trace

Function: start_gateway

Function: gateway_pms_get_status

parameter	description
`<response-code>`	Expected http response code

Function: gateway_ecs_get_types

parameter	description
`<response-code>`	Expected http response code

Description of functions in http_proxy_api_functions.sh

Function: use_http_proxy_http

Function: use_http_proxy_https

Function: start_http_proxy

Description of functions in kube_proxy_api_functions.sh

Function: use_kube_proxy_http

Function: use_kube_proxy_https

Function: start_kube_proxy

Start the kube proxy container in kube. This proxy enabled the test env to access all services and pods in a kube cluster. No proxy is started if the function is called in docker mode. | arg list | |--| | None |

Description of functions in mr_api_functions.sh

Function: use_mr_http

Use http for all Dmaap calls to the MR. This is the default. The admin API is not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_mr_https

Use https for all Dmaap call to the MR. The admin API is not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: start_mr

Function: mr_equal

Tests if a variable value in the Message Router (MR) simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameter	description
`<variable-name>`	Variable name in the MR
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: mr_greater

Tests if a variable value in the Message Router (MR) simulator is greater than a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is greater than the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes greater than the target value or not. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameter	description
`<variable-name>`	Variable name in the MR
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to become grater than the target value

Function: mr_read

Reads the value of a variable in the Message Router (MR) simulator. The value is intended to be passed to a env variable in the test script. See the 'mrstub' dir for more details. | arg list | |--| | <variable-name> |

parameter	description
`<variable-name>`	Variable name in the MR

Function: mr_print

parameter	description
`<variable-name>`	Variable name in the MR

Description of functions in prodstub_api_functions.sh

Function: use_prod_stub_http

Function: use_prod_stub_https

Function: start_prod_stub

Function: prodstub_arm_producer()

Preconfigure the prodstub with a producer. The producer supervision response code is optional, if not given the response code will be set to 200.

arg list
`<response-code> <producer-id> [<forced_response_code>]`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<forced_response_code>`	Forced response code for the producer callback url

Function: prodstub_arm_job_create()

Preconfigure the prodstub with a job or update an existing job. Optional create/update job response code, if not given the response code will be set to 200/201 depending on if the job has been previously created or not.

arg list
`<response-code> <job-id> [<forced_response_code>]`

parameter	description
`<response-code>`	Expected http response code
`<job-id>`	Id of the job
`<forced_response_code>`	Forced response code for the create callback url

Function: prodstub_arm_job_delete()

Preconfigure the prodstub with a job. Optional delete job response code, if not given the response code will be set to 204/404 depending on if the job exists or not.

arg list
`<response-code> <job-id> [<forced_response_code>]`

parameter	description
`<response-code>`	Expected http response code
`<job-id>`	Id of the job
`<forced_response_code>`	Forced response code for the delete callback url

Function: prodstub_arm_type()

Preconfigure the prodstub with a type for a producer. Can be called multiple times to add more types.

arg list
`<response-code> <producer-id> <type-id>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<type-id>`	Id of the type

Function: prodstub_disarm_type()

Remove a type for the producer in the rodstub. Can be called multiple times to remove more types.

arg list
`<response-code> <producer-id> <type-id>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<type-id>`	Id of the type

Function: prodstub_check_jobdata()

Check a job in the prodstub towards the list of provided parameters.

arg list
`<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job
`<type-id>`	Id of the type
`<target-url>`	Target url for data delivery
`<job-owner>`	Id of the job owner
`<template-job-file>`	Path to a job template file

Function: prodstub_check_jobdata_2()

Check a job in the prodstub towards the list of provided parameters.

arg list
`<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job
`<type-id>`	Id of the type
`<target-url>`	Target url for data delivery
`<job-owner>`	Id of the job owner
`<template-job-file>`	Path to a job template file

Function: prodstub_check_jobdata_3()

Check a job in the prodstub towards the list of provided parameters.

arg list
`<response-code> <producer-id> <job-id> <type-id> <target-url> <job-owner> <template-job-file>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job
`<type-id>`	Id of the type
`<target-url>`	Target url for data delivery
`<job-owner>`	Id of the job owner
`<template-job-file>`	Path to a job template file

Function: prodstub_delete_jobdata()

Delete the job parameters, job data, for a job.

arg list
`<response-code> <producer-id> <job-id>`

parameter	description
`<response-code>`	Expected http response code
`<producer-id>`	Id of the producer
`<job-id>`	Id of the job

Function: prodstub_equal

Tests if a variable value in the prodstub is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not.

arg list
`<variable-name> <target-value> [ <timeout-in-sec> ]`

parameter	description
`<variable-name>`	Variable name in the prostub
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Description of functions in rapp_catalogue_api_function.sh

Function: use_rapp_catalogue_http

Function: use_rapp_catalogue_https

Function: start_rapp_catalogue

Function: rc_equal

Tests if a variable value in the RAPP Catalogue is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'cr' dir for more details. | arg list | |--| | <variable-name> <target-value> [ <timeout-in-sec> ] |

parameter	description
`<variable-name>`	Variable name in the RC
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: rapp_cat_api_get_services()

Check all registered services.

arg list
`<response-code> [(<service-id> <version> <display-name> <description>)+ \| EMPTY ]`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service
`<version>`	Version of the service
`<display-name>`	Dislay name of the service
`<description>`	Description of the service
`EMPTY`	Indicator for an empty list

Function: rapp_cat_api_put_service()

arg list
`<response-code> <service-id> <version> <display-name> <description>`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service
`<version>`	Version of the service
`<display-name>`	Dislay name of the service
`<description>`	Description of the service

Function: rapp_cat_api_get_service()

Check a registered service.

arg list
`<response-code> <service-id> <version> <display-name> <description>`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service
`<version>`	Version of the service
`<display-name>`	Dislay name of the service
`<description>`	Description of the service

Function: rapp_cat_api_delete_service()

Check a registered service.

arg list
`<response-code> <service-id>`

parameter	description
`<response-code>`	Expected http response code
`<service-id>`	Id of the service

Description of functions in ricsimulator_api_functions.sh

The functions below only use the admin interface of the simulator, no usage of the A1 interface.

Function: use_simulator_http

Use http for all API calls (A1) toward the simulator. This is the default. Admin API calls to the simulator are not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: use_simulator_https

Use https for all API calls (A1) toward the simulator. Admin API calls to the simulator are not affected. Note that this function shall be called before preparing the config for Consul. | arg list | |--| | None |

Function: start_ric_simulators

parameter	description
`ricsim_g1\|ricsim_g2\|ricsim_g3`	Base name of the simulator. Each instance will have an postfix instance id added, starting on '1'. For examplle 'ricsim_g1_1', 'ricsim_g1_2' etc
`<count>`	And integer, 1 or greater. Specifies the number of simulators to start
`<interface-id>`	Shall be the interface id of the simulator. See the repo 'a1-interface' for the available ids.

Function: get_kube_sim_host

parameter	description
`<ric-name>`	The name of the ric to translate into a host name (ip)

Function: generate_policy_uuid

Geneate a UUID prefix to use along with the policy instance number when creating/deleting policies. Sets the env var UUID. UUID is then automatically added to the policy id in GET/PUT/DELETE. | arg list | |--| | None |

Function: sim_equal

Tests if a variable value in the RIC simulator is equal to a target value. Without the timeout, the test sets pass or fail immediately depending on if the variable is equal to the target or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value becomes equal to the target value or not. See the 'a1-interface' repo for more details.

arg list
`<variable-name> <target-value> [ <timeout-in-sec> ]`

parameter	description
`<variable-name>`	Variable name in the ric simulator
`<target-value>`	Target value for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: sim_print

Prints the value of a variable in the RIC simulator. See the 'a1-interface' repo for more details.

arg list
`<variable-name>`

parameter	description
`<variable-name>`	Variable name in the RIC simulator

Function: sim_contains_str

Tests if a variable value in the RIC simulator contains a target string. Without the timeout, the test sets pass or fail immediately depending on if the variable contains the target string or not. With the timeout, the test waits up to the timeout seconds before setting pass or fail depending on if the variable value contains the target string or not. See the 'a1-interface' repo for more details.

arg list
`<variable-name> <target-value> [ <timeout-in-sec> ]`

parameter	description
`<variable-name>`	Variable name in the ric simulator
`<target-value>`	Target substring for the variable
`<timeout-in-sec>`	Max time to wait for the variable to reach the target value

Function: sim_put_policy_type

Loads a policy type to the simulator

arg list
`<response-code> <ric-id> <policy-type-id> <policy-type-file>`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`<policy-type-id>`	Id of the policy type
`<policy-type-file>`	Path to the schema file of the policy type

Function: sim_delete_policy_type

Deletes a policy type from the simulator

arg list
`<response-code> <ric-id> <policy_type_id>`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`<policy-type-id>`	Id of the policy type

Function: sim_post_delete_instances

Deletes all instances (and status), for one ric

arg list
`<response-code> <ric-id>`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric

Function: sim_post_delete_all

Deletes all types, instances (and status), for one ric

arg list
`<response-code> <ric-id>`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric

Function: sim_post_forcedresponse

Sets (or resets) response code for next (one) A1 message, for one ric. The intention is to simulate error response on the A1 interface.

arg list
`<response-code> <ric-id> [<forced_response_code>]`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`<forced_response_code>`	Http response code to send

Function: sim_post_forcedelay

Sets (or resets) A1 response delay, for one ric The intention is to delay responses on the A1 interface. Setting remains until removed.

arg list
`<response-code> <ric-id> [<delay-in-seconds>]`

parameter	description
`<response-code>`	Expected http response code
`<ric-id>`	Id of the ric
`<delay-in-seconds>`	Delay in seconds. If omitted, the delay is removed

License

Copyright (C) 2020 Nordix Foundation. All rights reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

 http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.