| #!/bin/bash |
| |
| # ============LICENSE_START=============================================== |
| # Copyright (C) 2020 Nordix Foundation. All rights reserved. |
| # ======================================================================== |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # ============LICENSE_END================================================= |
| # |
| |
| # This is a script that contains management and test functions for Policy Agent |
| |
| |
| ## Access to Policy agent |
| # Host name may be changed if app started by kube |
| # Direct access from script |
| PA_HTTPX="http" |
| PA_HOST_NAME=$LOCALHOST_NAME |
| PA_PATH=$PA_HTTPX"://"$PA_HOST_NAME":"$POLICY_AGENT_EXTERNAL_PORT |
| |
| # PA_ADAPTER used for switch between REST and DMAAP |
| PA_ADAPTER_TYPE="REST" |
| PA_ADAPTER=$PA_PATH |
| |
| # Make curl retries towards the agent for http response codes set in this env var, space separated list of codes |
| AGENT_RETRY_CODES="" |
| |
| ########################### |
| ### Policy Agents functions |
| ########################### |
| |
| # All calls to the agent will be directed to the agent REST interface from now on |
| # args: - |
| # (Function for test scripts) |
| use_agent_rest_http() { |
| echo -e $BOLD"Agent protocol setting"$EBOLD |
| echo -e " Using $BOLD http $EBOLD and $BOLD REST $EBOLD towards the agent" |
| PA_HTTPX="http" |
| PA_PATH=$PA_HTTPX"://"$PA_HOST_NAME":"$POLICY_AGENT_EXTERNAL_PORT |
| |
| PA_ADAPTER_TYPE="REST" |
| PA_ADAPTER=$PA_PATH |
| echo "" |
| } |
| |
| # All calls to the agent will be directed to the agent REST interface from now on |
| # args: - |
| # (Function for test scripts) |
| use_agent_rest_https() { |
| echo -e $BOLD"Agent protocol setting"$EBOLD |
| echo -e " Using $BOLD https $EBOLD and $BOLD REST $EBOLD towards the agent" |
| PA_HTTPX="https" |
| PA_PATH=$PA_HTTPX"://"$PA_HOST_NAME":"$POLICY_AGENT_EXTERNAL_SECURE_PORT |
| |
| PA_ADAPTER_TYPE="REST" |
| PA_ADAPTER=$PA_PATH |
| echo "" |
| } |
| |
| # All calls to the agent will be directed to the agent dmaap interface over http from now on |
| # args: - |
| # (Function for test scripts) |
| use_agent_dmaap_http() { |
| echo -e $BOLD"Agent dmaap protocol setting"$EBOLD |
| echo -e " Using $BOLD http $EBOLD and $BOLD DMAAP $EBOLD towards the agent" |
| PA_ADAPTER_TYPE="MR-HTTP" |
| echo "" |
| } |
| |
| # All calls to the agent will be directed to the agent dmaap interface over https from now on |
| # args: - |
| # (Function for test scripts) |
| use_agent_dmaap_https() { |
| echo -e $BOLD"Agent dmaap protocol setting"$EBOLD |
| echo -e " Using $BOLD https $EBOLD and $BOLD DMAAP $EBOLD towards the agent" |
| echo -e $YELLOW" Setting http instead of https - MR only uses http"$EYELLOW |
| PA_ADAPTER_TYPE="MR-HTTPS" |
| echo "" |
| } |
| |
| # Start the policy agent |
| # args: (docker) PROXY|NOPROXY <config-file> |
| # args: (kube) PROXY|NOPROXY <config-file> [ <data-file>] |
| # (Function for test scripts) |
| start_policy_agent() { |
| echo -e $BOLD"Starting $POLICY_AGENT_DISPLAY_NAME"$EBOLD |
| |
| if [ $RUNMODE == "KUBE" ]; then |
| |
| # Check if app shall be fully managed by the test script |
| __check_included_image "PA" |
| retcode_i=$? |
| |
| # Check if app shall only be used by the testscipt |
| __check_prestarted_image "PA" |
| retcode_p=$? |
| |
| if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then |
| echo -e $RED"The $POLICY_AGENT_APP_NAME app is not included as managed nor prestarted in this test script"$ERED |
| echo -e $RED"The $POLICY_AGENT_APP_NAME will not be started"$ERED |
| exit |
| fi |
| if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then |
| echo -e $RED"The $POLICY_AGENT_APP_NAME app is included both as managed and prestarted in this test script"$ERED |
| echo -e $RED"The $POLICY_AGENT_APP_NAME will not be started"$ERED |
| exit |
| fi |
| |
| if [ $retcode_p -eq 0 ]; then |
| echo -e " Using existing $POLICY_AGENT_APP_NAME deployment and service" |
| echo " Setting $POLICY_AGENT_APP_NAME replicas=1" |
| __kube_scale deployment $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE 1 |
| fi |
| |
| if [ $retcode_i -eq 0 ]; then |
| |
| echo -e " Creating $POLICY_AGENT_APP_NAME app and expose service" |
| |
| #Check if nonrtric namespace exists, if not create it |
| __kube_create_namespace $KUBE_NONRTRIC_NAMESPACE |
| |
| #Export all vars needed for service and deployment |
| export POLICY_AGENT_APP_NAME |
| export KUBE_NONRTRIC_NAMESPACE |
| export POLICY_AGENT_IMAGE |
| export POLICY_AGENT_INTERNAL_PORT |
| export POLICY_AGENT_INTERNAL_SECURE_PORT |
| export POLICY_AGENT_EXTERNAL_PORT |
| export POLICY_AGENT_EXTERNAL_SECURE_PORT |
| export POLICY_AGENT_CONFIG_MOUNT_PATH |
| export POLICY_AGENT_DATA_MOUNT_PATH |
| export POLICY_AGENT_CONFIG_CONFIGMAP_NAME=$POLICY_AGENT_APP_NAME"-config" |
| export POLICY_AGENT_DATA_CONFIGMAP_NAME=$POLICY_AGENT_APP_NAME"-data" |
| export POLICY_AGENT_PKG_NAME |
| if [ $1 == "PROXY" ]; then |
| AGENT_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started |
| AGENT_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started |
| if [ $AGENT_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$AGENT_HTTP_PROXY_CONFIG_HOST_NAME" ]; then |
| echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW |
| else |
| echo " Configured with http proxy" |
| fi |
| else |
| AGENT_HTTP_PROXY_CONFIG_PORT=0 |
| AGENT_HTTP_PROXY_CONFIG_HOST_NAME="" |
| echo " Configured without http proxy" |
| fi |
| export AGENT_HTTP_PROXY_CONFIG_PORT |
| export AGENT_HTTP_PROXY_CONFIG_HOST_NAME |
| |
| |
| # Create config map for config |
| configfile=$PWD/tmp/$POLICY_AGENT_CONFIG_FILE |
| cp $2 $configfile |
| output_yaml=$PWD/tmp/pa_cfc.yaml |
| __kube_create_configmap $POLICY_AGENT_CONFIG_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest PA $configfile $output_yaml |
| |
| # Create config map for data |
| data_json=$PWD/tmp/$POLICY_AGENT_DATA_FILE |
| if [ $# -lt 3 ]; then |
| #create empty dummy file |
| echo "{}" > $data_json |
| else |
| cp $3 $data_json |
| fi |
| output_yaml=$PWD/tmp/pa_cfd.yaml |
| __kube_create_configmap $POLICY_AGENT_DATA_CONFIGMAP_NAME $KUBE_NONRTRIC_NAMESPACE autotest PA $data_json $output_yaml |
| |
| # Create service |
| input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"svc.yaml |
| output_yaml=$PWD/tmp/pa_svc.yaml |
| __kube_create_instance service $POLICY_AGENT_APP_NAME $input_yaml $output_yaml |
| |
| # Create app |
| input_yaml=$SIM_GROUP"/"$POLICY_AGENT_COMPOSE_DIR"/"app.yaml |
| output_yaml=$PWD/tmp/pa_app.yaml |
| __kube_create_instance app $POLICY_AGENT_APP_NAME $input_yaml $output_yaml |
| |
| fi |
| |
| echo " Retrieving host and ports for service..." |
| PA_HOST_NAME=$(__kube_get_service_host $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE) |
| POLICY_AGENT_EXTERNAL_PORT=$(__kube_get_service_port $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE "http") |
| POLICY_AGENT_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $POLICY_AGENT_APP_NAME $KUBE_NONRTRIC_NAMESPACE "https") |
| |
| echo " Host IP, http port, https port: $PA_HOST_NAME $POLICY_AGENT_EXTERNAL_PORT $POLICY_AGENT_EXTERNAL_SECURE_PORT" |
| |
| if [ $PA_HTTPX == "http" ]; then |
| PA_PATH=$PA_HTTPX"://"$PA_HOST_NAME":"$POLICY_AGENT_EXTERNAL_PORT |
| else |
| PA_PATH=$PA_HTTPX"://"$PA_HOST_NAME":"$POLICY_AGENT_EXTERNAL_SECURE_PORT |
| fi |
| __check_service_start $POLICY_AGENT_APP_NAME $PA_PATH$POLICY_AGENT_ALIVE_URL |
| |
| if [ $PA_ADAPTER_TYPE == "REST" ]; then |
| PA_ADAPTER=$PA_PATH |
| fi |
| else |
| __check_included_image 'PA' |
| if [ $? -eq 1 ]; then |
| echo -e $RED"The Policy Agent app is not included in this test script"$ERED |
| echo -e $RED"The Policy Agent will not be started"$ERED |
| exit |
| fi |
| |
| #Export all vars needed for docker-compose |
| export POLICY_AGENT_APP_NAME |
| export POLICY_AGENT_APP_NAME_ALIAS |
| export POLICY_AGENT_INTERNAL_PORT |
| export POLICY_AGENT_EXTERNAL_PORT |
| export POLICY_AGENT_INTERNAL_SECURE_PORT |
| export POLICY_AGENT_EXTERNAL_SECURE_PORT |
| export CONSUL_HOST |
| export CONSUL_INTERNAL_PORT |
| export CONFIG_BINDING_SERVICE |
| export POLICY_AGENT_CONFIG_KEY |
| export DOCKER_SIM_NWNAME |
| export POLICY_AGENT_HOST_MNT_DIR |
| export POLICY_AGENT_CONFIG_MOUNT_PATH |
| export POLICY_AGENT_CONFIG_FILE |
| export POLICY_AGENT_PKG_NAME |
| |
| if [ $1 == "PROXY" ]; then |
| AGENT_HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_CONFIG_PORT #Set if proxy is started |
| AGENT_HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_CONFIG_HOST_NAME #Set if proxy is started |
| if [ $AGENT_HTTP_PROXY_CONFIG_PORT -eq 0 ] || [ -z "$AGENT_HTTP_PROXY_CONFIG_HOST_NAME" ]; then |
| echo -e $YELLOW" Warning: HTTP PROXY will not be configured, proxy app not started"$EYELLOW |
| else |
| echo " Configured with http proxy" |
| fi |
| else |
| AGENT_HTTP_PROXY_CONFIG_PORT=0 |
| AGENT_HTTP_PROXY_CONFIG_HOST_NAME="" |
| echo " Configured without http proxy" |
| fi |
| export AGENT_HTTP_PROXY_CONFIG_PORT |
| export AGENT_HTTP_PROXY_CONFIG_HOST_NAME |
| |
| dest_file=$SIM_GROUP/$POLICY_AGENT_COMPOSE_DIR/$POLICY_AGENT_HOST_MNT_DIR/application.yaml |
| |
| envsubst < $2 > $dest_file |
| |
| __start_container $POLICY_AGENT_COMPOSE_DIR NODOCKERARGS 1 $POLICY_AGENT_APP_NAME |
| |
| __check_service_start $POLICY_AGENT_APP_NAME $PA_PATH$POLICY_AGENT_ALIVE_URL |
| fi |
| echo "" |
| return 0 |
| } |
| |
| agent_load_config() { |
| echo -e $BOLD"Agent - load config from "$EBOLD$1 |
| data_json=$PWD/tmp/$POLICY_AGENT_DATA_FILE |
| cp $1 $data_json |
| output_yaml=$PWD/tmp/pa_cfd.yaml |
| __kube_create_configmap $POLICY_AGENT_APP_NAME"-data" $KUBE_NONRTRIC_NAMESPACE autotest PA $data_json $output_yaml |
| } |
| |
| |
| # Turn on debug level tracing in the agent |
| # args: - |
| # (Function for test scripts) |
| set_agent_debug() { |
| echo -e $BOLD"Setting agent debug logging"$EBOLD |
| curlString="$PA_PATH$POLICY_AGENT_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"debug\"}" |
| result=$(__do_curl "$curlString") |
| if [ $? -ne 0 ]; then |
| __print_err "could not set debug mode" $@ |
| ((RES_CONF_FAIL++)) |
| return 1 |
| fi |
| echo "" |
| return 0 |
| } |
| |
| # Turn on trace level tracing in the agent |
| # args: - |
| # (Function for test scripts) |
| set_agent_trace() { |
| echo -e $BOLD"Setting agent trace logging"$EBOLD |
| curlString="$PA_PATH$POLICY_AGENT_ACTUATOR -X POST -H Content-Type:application/json -d {\"configuredLevel\":\"trace\"}" |
| result=$(__do_curl "$curlString") |
| if [ $? -ne 0 ]; then |
| __print_err "could not set trace mode" $@ |
| ((RES_CONF_FAIL++)) |
| return 1 |
| fi |
| echo "" |
| return 0 |
| } |
| |
| # Perform curl retries when making direct call to the agent for the specified http response codes |
| # Speace separated list of http response codes |
| # args: [<response-code>]* |
| use_agent_retries() { |
| echo -e $BOLD"Do curl retries to the agent REST inteface for these response codes:$@"$EBOLD |
| AGENT_RETRY_CODES=$@ |
| echo "" |
| return |
| } |
| |
| ######################################################### |
| #### Test case functions A1 Policy management service |
| ######################################################### |
| |
| # This function compare the size, towards a target value, of a json array returned from <url> of the Policy Agent. |
| # This is done immediately by setting PASS or FAIL or wait up to and optional timeout before setting PASS or FAIL |
| # args: json:<url> <target-value> [<timeout-in-seconds] |
| # (Function for test scripts) |
| api_equal() { |
| echo "(${BASH_LINENO[0]}): ${FUNCNAME[0]}" $@ >> $HTTPLOG |
| if [ $# -eq 2 ] || [ $# -eq 3 ]; then |
| if [[ $1 == "json:"* ]]; then |
| if [ "$PMS_VERSION" == "V2" ]; then |
| __var_test "Policy Agent" $PA_PATH$PMS_API_PREFIX"/v2/" $1 "=" $2 $3 |
| else |
| __var_test "Policy Agent" $PA_PATH"/" $1 "=" $2 $3 |
| fi |
| return 0 |
| fi |
| fi |
| __print_err "needs two or three args: json:<json-array-param> <target-value> [ timeout ]" $@ |
| return 1 |
| } |
| |
| # API Test function: GET /policies and V2 GET /v2/policy-instances |
| # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*] |
| # args(V2): <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*] |
| # (Function for test scripts) |
| api_get_policies() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| paramError=0 |
| variableParams=$(($#-4)) |
| if [ $# -lt 4 ]; then |
| paramError=1 |
| elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then |
| paramError=1 |
| elif [ $# -gt 5 ] && [ $(($variableParams%7)) -ne 0 ]; then |
| paramError=1 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <transient> <notification-url> <template-file>]*]" $@ |
| return 1 |
| fi |
| else |
| paramError=0 |
| variableParams=$(($#-4)) |
| if [ $# -lt 4 ]; then |
| paramError=1 |
| elif [ $# -eq 5 ] && [ $5 != "NOID" ]; then |
| paramError=1 |
| elif [ $# -gt 5 ] && [ $(($variableParams%5)) -ne 0 ]; then |
| paramError=1 |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <policy-type-id>|NOTYPE [ NOID | [<policy-id> <ric-id> <service-id> EMPTY|<policy-type-id> <template-file>]*]" $@ |
| return 1 |
| fi |
| fi |
| |
| queryparams="" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $2 != "NORIC" ]; then |
| queryparams="?ric_id="$2 |
| fi |
| if [ $3 != "NOSERVICE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?service_id="$3 |
| else |
| queryparams=$queryparams"&service_id="$3 |
| fi |
| fi |
| if [ $4 != "NOTYPE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?policytype_id="$4 |
| else |
| queryparams=$queryparams"&policytype_id="$4 |
| fi |
| fi |
| |
| query="/v2/policy-instances"$queryparams |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 4 ]; then |
| body=${res:0:${#res}-3} |
| if [ $# -eq 5 ] && [ $5 == "NOID" ]; then |
| targetJson="[" |
| else |
| targetJson="[" |
| arr=(${@:5}) |
| |
| for ((i=0; i<$(($#-4)); i=i+7)); do |
| |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"{\"policy_id\":\"$UUID${arr[$i]}\",\"ric_id\":\"${arr[$i+1]}\",\"service_id\":\"${arr[$i+2]}\",\"policytype_id\":" |
| if [ "${arr[$i+3]}" == "EMPTY" ]; then |
| targetJson=$targetJson"\"\"," |
| else |
| targetJson=$targetJson"\"${arr[$i+3]}\"," |
| fi |
| targetJson=$targetJson"\"transient\":${arr[$i+4]},\"status_notification_uri\":\"${arr[$i+5]}\"," |
| file="./tmp/.p.json" |
| sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+6]} > $file |
| json=$(cat $file) |
| targetJson=$targetJson"\"policy_data\":"$json"}" |
| done |
| fi |
| |
| targetJson=$targetJson"]" |
| targetJson="{\"policies\": $targetJson}" |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| else |
| if [ $2 != "NORIC" ]; then |
| queryparams="?ric="$2 |
| fi |
| if [ $3 != "NOSERVICE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?service="$3 |
| else |
| queryparams=$queryparams"&service="$3 |
| fi |
| fi |
| if [ $4 != "NOTYPE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?type="$4 |
| else |
| queryparams=$queryparams"&type="$4 |
| fi |
| fi |
| |
| query="/policies"$queryparams |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 4 ]; then |
| if [ $# -eq 5 ] && [ $5 == "NOID" ]; then |
| targetJson="[" |
| else |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| arr=(${@:5}) |
| |
| for ((i=0; i<$(($#-4)); i=i+5)); do |
| |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| targetJson=$targetJson"{\"id\":\"$UUID${arr[$i]}\",\"lastModified\":\"????\",\"ric\":\"${arr[$i+1]}\",\"service\":\"${arr[$i+2]}\",\"type\":" |
| if [ "${arr[$i+3]}" == "EMPTY" ]; then |
| targetJson=$targetJson"\"\"," |
| else |
| targetJson=$targetJson"\"${arr[$i+3]}\"," |
| fi |
| file="./tmp/.p.json" |
| sed 's/XXX/'${arr[$i]}'/g' ${arr[$i+4]} > $file |
| json=$(cat $file) |
| targetJson=$targetJson"\"json\":"$json"}" |
| done |
| fi |
| |
| targetJson=$targetJson"]" |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| |
| } |
| |
| |
| # API Test function: GET /policy and V2 GET /v2/policies/{policy_id} |
| # args: <response-code> <policy-id> [<template-file>] |
| # args(V2): <response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ] |
| |
| # (Function for test scripts) |
| api_get_policy() { |
| __log_test_start $@ |
| |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -ne 2 ] && [ $# -ne 8 ]; then |
| __print_err "<response-code> <policy-id> [ <template-file> <service-name> <ric-id> <policytype-id>|NOTYPE <transient> <notification-url>|NOURL ]" $@ |
| return 1 |
| fi |
| query="/v2/policies/$UUID$2" |
| else |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <policy-id> [<template-file>] " $@ |
| return 1 |
| fi |
| query="/policy?id=$UUID$2" |
| fi |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -eq 8 ]; then |
| |
| #Create a policy json to compare with |
| body=${res:0:${#res}-3} |
| |
| targetJson="\"ric_id\":\"$5\",\"policy_id\":\"$UUID$2\",\"service_id\":\"$4\"" |
| if [ $7 != "NOTRANSIENT" ]; then |
| targetJson=$targetJson", \"transient\":$7" |
| fi |
| if [ $6 != "NOTYPE" ]; then |
| targetJson=$targetJson", \"policytype_id\":\"$6\"" |
| else |
| targetJson=$targetJson", \"policytype_id\":\"\"" |
| fi |
| if [ $8 != "NOURL" ]; then |
| targetJson=$targetJson", \"status_notification_uri\":\"$8\"" |
| fi |
| |
| data=$(sed 's/XXX/'${2}'/g' $3) |
| targetJson=$targetJson", \"policy_data\":$data" |
| targetJson="{$targetJson}" |
| |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| else |
| if [ $# -eq 3 ]; then |
| #Create a policy json to compare with |
| body=${res:0:${#res}-3} |
| file="./tmp/.p.json" |
| sed 's/XXX/'${2}'/g' $3 > $file |
| targetJson=$(< $file) |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| fi |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: PUT /policy and V2 PUT /policies |
| # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>] |
| # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>] |
| # (Function for test scripts) |
| api_put_policy() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -lt 8 ] || [ $# -gt 9 ]; then |
| __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <notification-url>|NOURL <template-file> [<count>]" $@ |
| return 1 |
| fi |
| else |
| if [ $# -lt 7 ] || [ $# -gt 8 ]; then |
| __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient>|NOTRANSIENT <template-file> [<count>]" $@ |
| return 1 |
| fi |
| fi |
| |
| count=0 |
| max=1 |
| serv=$2 |
| ric=$3 |
| pt=$4 |
| pid=$5 |
| trans=$6 |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| noti=$7 |
| temp=$8 |
| if [ $# -eq 9 ]; then |
| max=$9 |
| fi |
| else |
| temp=$7 |
| if [ $# -eq 8 ]; then |
| max=$8 |
| fi |
| fi |
| |
| while [ $count -lt $max ]; do |
| if [ "$PMS_VERSION" == "V2" ]; then |
| |
| query="/v2/policies" |
| |
| inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" |
| if [ $trans != "NOTRANSIENT" ]; then |
| inputJson=$inputJson", \"transient\":$trans" |
| fi |
| if [ $pt != "NOTYPE" ]; then |
| inputJson=$inputJson", \"policytype_id\":\"$pt\"" |
| else |
| inputJson=$inputJson", \"policytype_id\":\"\"" |
| fi |
| if [ $noti != "NOURL" ]; then |
| inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" |
| fi |
| file="./tmp/.p.json" |
| data=$(sed 's/XXX/'${pid}'/g' $temp) |
| inputJson=$inputJson", \"policy_data\":$data" |
| inputJson="{$inputJson}" |
| echo $inputJson > $file |
| else |
| query="/policy?id=$UUID$pid&ric=$ric&service=$serv" |
| |
| if [ $pt != "NOTYPE" ]; then |
| query=$query"&type=$pt" |
| fi |
| |
| if [ $trans != NOTRANSIENT ]; then |
| query=$query"&transient=$trans" |
| fi |
| |
| file="./tmp/.p.json" |
| sed 's/XXX/'${pid}'/g' $temp > $file |
| fi |
| res="$(__do_curl_to_api PA PUT $query $file)" |
| status=${res:${#res}-3} |
| echo -ne " Executing "$count"("$max")${SAMELINE}" |
| if [ $status -ne $1 ]; then |
| echo " Executed "$count"?("$max")" |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| let pid=$pid+1 |
| let count=$count+1 |
| echo -ne " Executed "$count"("$max")${SAMELINE}" |
| done |
| echo "" |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: PUT /policy and V2 PUT /policies, to run in batch |
| # args: <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>] |
| # args(V2): <response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>] |
| # (Function for test scripts) |
| |
| api_put_policy_batch() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -lt 8 ] || [ $# -gt 9 ]; then |
| __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <notification-url>|NOURL <template-file> [<count>]" $@ |
| return 1 |
| fi |
| else |
| if [ $# -lt 7 ] || [ $# -gt 8 ]; then |
| __print_err "<response-code> <service-name> <ric-id> <policytype-id>|NOTYPE <policy-id> <transient> <template-file> [<count>]" $@ |
| return 1 |
| fi |
| fi |
| |
| count=0 |
| max=1 |
| serv=$2 |
| ric=$3 |
| pt=$4 |
| pid=$5 |
| trans=$6 |
| if [ "$PMS_VERSION" == "V2" ]; then |
| noti=$7 |
| temp=$8 |
| if [ $# -eq 9 ]; then |
| max=$9 |
| fi |
| else |
| temp=$7 |
| if [ $# -eq 8 ]; then |
| max=$8 |
| fi |
| fi |
| |
| ARR="" |
| while [ $count -lt $max ]; do |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/policies" |
| |
| inputJson="\"ric_id\":\"$ric\",\"policy_id\":\"$UUID$pid\",\"service_id\":\"$serv\"" |
| if [ $trans != "NOTRANSIENT" ]; then |
| inputJson=$inputJson", \"transient\":$trans" |
| fi |
| if [ $pt != "NOTYPE" ]; then |
| inputJson=$inputJson", \"policytype_id\":\"$pt\"" |
| else |
| inputJson=$inputJson", \"policytype_id\":\"\"" |
| fi |
| if [ $noti != "NOURL" ]; then |
| inputJson=$inputJson", \"status_notification_uri\":\"$noti\"" |
| fi |
| file="./tmp/.p.json" |
| data=$(sed 's/XXX/'${pid}'/g' $temp) |
| inputJson=$inputJson", \"policy_data\":$data" |
| inputJson="{$inputJson}" |
| echo $inputJson > $file |
| else |
| query="/policy?id=$UUID$pid&ric=$ric&service=$serv" |
| |
| if [ $pt != "NOTYPE" ]; then |
| query=$query"&type=$pt" |
| fi |
| |
| if [ $trans != NOTRANSIENT ]; then |
| query=$query"&transient=$trans" |
| fi |
| file="./tmp/.p.json" |
| sed 's/XXX/'${pid}'/g' $temp > $file |
| fi |
| res="$(__do_curl_to_api PA PUT_BATCH $query $file)" |
| status=${res:${#res}-3} |
| echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" |
| |
| if [ $status -ne 200 ]; then |
| echo " Requested(batch) "$count"?("$max")" |
| __log_test_fail_status_code 200 $status |
| return 1 |
| fi |
| cid=${res:0:${#res}-3} |
| ARR=$ARR" "$cid |
| let pid=$pid+1 |
| let count=$count+1 |
| echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" |
| done |
| |
| echo "" |
| count=0 |
| for cid in $ARR; do |
| |
| res="$(__do_curl_to_api PA RESPONSE $cid)" |
| status=${res:${#res}-3} |
| echo -ne " Accepting(batch) "$count"("$max")${SAMELINE}" |
| |
| if [ $status -ne $1 ]; then |
| echo " Accepted(batch) "$count"?("$max")" |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| let count=$count+1 |
| echo -ne " Accepted(batch) "$count"("$max")${SAMELINE}" |
| done |
| |
| echo "" |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: PUT /policy and V2 PUT /policies, to run in i parallel for a number of rics |
| # args: <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads> |
| # args(V2): <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads> |
| # (Function for test scripts) |
| api_put_policy_parallel() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -ne 11 ]; then |
| __print_err "<response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <notification-url>|NOURL <template-file> <count-per-ric> <number-of-threads>" $@ |
| return 1 |
| fi |
| else |
| if [ $# -ne 10 ]; then |
| __print_err " <response-code> <service-name> <ric-id-base> <number-of-rics> <policytype-id> <policy-start-id> <transient> <template-file> <count-per-ric> <number-of-threads>" $@ |
| return 1 |
| fi |
| fi |
| resp_code=$1; shift; |
| serv=$1; shift |
| ric_base=$1; shift; |
| num_rics=$1; shift; |
| type=$1; shift; |
| start_id=$1; shift; |
| transient=$1; shift; |
| if [ "$PMS_VERSION" == "V2" ]; then |
| noti=$1; shift; |
| else |
| noti="" |
| fi |
| template=$1; shift; |
| count=$1; shift; |
| pids=$1; shift; |
| |
| #if [ $PA_ADAPTER != $RESTBASE ] && [ $PA_ADAPTER != $RESTBASE_SECURE ]; then |
| if [ $PA_ADAPTER_TYPE != "REST" ]; then |
| echo " Info - api_put_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported" |
| echo " Info - will execute over agent REST" |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $serv == "NOSERVICE" ]; then |
| serv="" |
| fi |
| query="$PMS_API_PREFIX/v2/policies" |
| else |
| if [ $serv == "NOSERVICE" ]; then |
| serv="" |
| fi |
| query="/policy?service=$serv" |
| |
| if [ $type != "NOTYPE" ]; then |
| query=$query"&type=$type" |
| fi |
| |
| if [ $transient != NOTRANSIENT ]; then |
| query=$query"&transient=$transient" |
| fi |
| fi |
| |
| urlbase=${PA_ADAPTER}${query} |
| |
| for ((i=1; i<=$pids; i++)) |
| do |
| uuid=$UUID |
| if [ -z "$uuid" ]; then |
| uuid="NOUUID" |
| fi |
| echo "" > "./tmp/.pid${i}.res.txt" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $serv $type $transient $noti $template $count $pids $i > "./tmp/.pid${i}.txt" |
| else |
| echo $resp_code $urlbase $ric_base $num_rics $uuid $start_id $template $count $pids $i > "./tmp/.pid${i}.txt" |
| fi |
| echo $i |
| done | xargs -n 1 -I{} -P $pids bash -c '{ |
| arg=$(echo {}) |
| echo " Parallel process $arg started" |
| tmp=$(< "./tmp/.pid${arg}.txt") |
| python3 ../common/create_policies_process.py $tmp > ./tmp/.pid${arg}.res.txt |
| }' |
| msg="" |
| for ((i=1; i<=$pids; i++)) |
| do |
| file="./tmp/.pid${i}.res.txt" |
| tmp=$(< $file) |
| if [ -z "$tmp" ]; then |
| echo " Process $i : unknown result (result file empty" |
| msg="failed" |
| else |
| res=${tmp:0:1} |
| if [ $res == "0" ]; then |
| echo " Process $i : OK - "${tmp:1} |
| else |
| echo " Process $i : failed - "${tmp:1} |
| msg="failed" |
| fi |
| fi |
| done |
| if [ -z $msg ]; then |
| __log_test_pass " $(($count*$num_rics)) policy request(s) executed" |
| return 0 |
| fi |
| |
| __log_test_fail_general "One of more processes failed to execute" |
| return 1 |
| } |
| |
| # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id} |
| # args: <response-code> <policy-id> [count] |
| # (Function for test scripts) |
| api_delete_policy() { |
| __log_test_start $@ |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <policy-id> [count]" $@ |
| return 1 |
| fi |
| |
| count=0 |
| max=1 |
| |
| if [ $# -eq 3 ]; then |
| max=$3 |
| fi |
| |
| pid=$2 |
| |
| while [ $count -lt $max ]; do |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/policies/"$UUID$pid |
| else |
| query="/policy?id="$UUID$pid |
| fi |
| res="$(__do_curl_to_api PA DELETE $query)" |
| status=${res:${#res}-3} |
| echo -ne " Executing "$count"("$max")${SAMELINE}" |
| |
| if [ $status -ne $1 ]; then |
| echo " Executed "$count"?("$max")" |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| let pid=$pid+1 |
| let count=$count+1 |
| echo -ne " Executed "$count"("$max")${SAMELINE}" |
| done |
| echo "" |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in batch |
| # args: <response-code> <policy-id> [count] |
| # (Function for test scripts) |
| api_delete_policy_batch() { |
| __log_test_start $@ |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <policy-id> [count]" $@ |
| return 1 |
| fi |
| |
| count=0 |
| max=1 |
| |
| if [ $# -eq 3 ]; then |
| max=$3 |
| fi |
| |
| pid=$2 |
| ARR="" |
| while [ $count -lt $max ]; do |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/policies/"$UUID$pid |
| else |
| query="/policy?id="$UUID$pid |
| fi |
| res="$(__do_curl_to_api PA DELETE_BATCH $query)" |
| status=${res:${#res}-3} |
| echo -ne " Requesting(batch) "$count"("$max")${SAMELINE}" |
| |
| if [ $status -ne 200 ]; then |
| echo " Requested(batch) "$count"?("$max")" |
| __log_test_fail_status_code 200 $status |
| return 1 |
| fi |
| cid=${res:0:${#res}-3} |
| ARR=$ARR" "$cid |
| let pid=$pid+1 |
| let count=$count+1 |
| echo -ne " Requested(batch) "$count"("$max")${SAMELINE}" |
| done |
| |
| echo "" |
| |
| count=0 |
| for cid in $ARR; do |
| |
| res="$(__do_curl_to_api PA RESPONSE $cid)" |
| status=${res:${#res}-3} |
| echo -ne " Deleting(batch) "$count"("$max")${SAMELINE}" |
| |
| if [ $status -ne $1 ]; then |
| echo " Deleted(batch) "$count"?("$max")" |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| let count=$count+1 |
| echo -ne " Deleted(batch) "$count"("$max")${SAMELINE}" |
| done |
| |
| echo "" |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: DELETE /policy and V2 DELETE /v2/policies/{policy_id}, to run in i parallel for a number of rics |
| # args: <response-code> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads> |
| # (Function for test scripts) |
| api_delete_policy_parallel() { |
| __log_test_start $@ |
| |
| if [ $# -ne 5 ]; then |
| __print_err " <response-code> <ric-id-base> <number-of-rics> <policy-start-id> <count-per-ric> <number-of-threads>" $@ |
| return 1 |
| fi |
| resp_code=$1; shift; |
| num_rics=$1; shift; |
| start_id=$1; shift; |
| count=$1; shift; |
| pids=$1; shift; |
| |
| #if [ $PA_ADAPTER != $RESTBASE ] && [ $PA_ADAPTER != $RESTBASE_SECURE ]; then |
| if [ $PA_ADAPTER_TYPE != "REST" ]; then |
| echo " Info - api_delete_policy_parallel uses only the agent REST interface - create over dmaap in parallel is not supported" |
| echo " Info - will execute over agent REST" |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="$PMS_API_PREFIX/v2/policies/" |
| else |
| query="/policy" |
| fi |
| |
| urlbase=${PA_ADAPTER}${query} |
| |
| for ((i=1; i<=$pids; i++)) |
| do |
| uuid=$UUID |
| if [ -z "$uuid" ]; then |
| uuid="NOUUID" |
| fi |
| echo "" > "./tmp/.pid${i}.del.res.txt" |
| echo $resp_code $urlbase $num_rics $uuid $start_id $count $pids $i > "./tmp/.pid${i}.del.txt" |
| echo $i |
| done | xargs -n 1 -I{} -P $pids bash -c '{ |
| arg=$(echo {}) |
| echo " Parallel process $arg started" |
| tmp=$(< "./tmp/.pid${arg}.del.txt") |
| python3 ../common/delete_policies_process.py $tmp > ./tmp/.pid${arg}.del.res.txt |
| }' |
| msg="" |
| for ((i=1; i<=$pids; i++)) |
| do |
| file="./tmp/.pid${i}.del.res.txt" |
| tmp=$(< $file) |
| if [ -z "$tmp" ]; then |
| echo " Process $i : unknown result (result file empty" |
| msg="failed" |
| else |
| res=${tmp:0:1} |
| if [ $res == "0" ]; then |
| echo " Process $i : OK - "${tmp:1} |
| else |
| echo " Process $i : failed - "${tmp:1} |
| msg="failed" |
| fi |
| fi |
| done |
| if [ -z $msg ]; then |
| __log_test_pass " $(($count*$num_rics)) policy request(s) executed" |
| return 0 |
| fi |
| |
| __log_test_fail_general "One of more processes failed to execute" |
| return 1 |
| } |
| |
| # API Test function: GET /policy_ids and V2 GET /v2/policies |
| # args: <response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID) |
| # (Function for test scripts) |
| api_get_policy_ids() { |
| __log_test_start $@ |
| |
| if [ $# -lt 4 ]; then |
| __print_err "<response-code> <ric-id>|NORIC <service-id>|NOSERVICE <type-id>|NOTYPE ([<policy-instance-id]*|NOID)" $@ |
| return 1 |
| fi |
| |
| queryparams="" |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $2 != "NORIC" ]; then |
| queryparams="?ric_id="$2 |
| fi |
| |
| if [ $3 != "NOSERVICE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?service_id="$3 |
| else |
| queryparams=$queryparams"&service_id="$3 |
| fi |
| fi |
| if [ $4 != "NOTYPE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?policytype_id="$4 |
| else |
| queryparams=$queryparams"&policytype_id="$4 |
| fi |
| fi |
| |
| query="/v2/policies"$queryparams |
| else |
| if [ $2 != "NORIC" ]; then |
| queryparams="?ric="$2 |
| fi |
| |
| if [ $3 != "NOSERVICE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?service="$3 |
| else |
| queryparams=$queryparams"&service="$3 |
| fi |
| fi |
| if [ $4 != "NOTYPE" ]; then |
| if [ -z $queryparams ]; then |
| queryparams="?type="$4 |
| else |
| queryparams=$queryparams"&type="$4 |
| fi |
| fi |
| |
| query="/policy_ids"$queryparams |
| fi |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 4 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| |
| for pid in ${@:5} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ $pid != "NOID" ]; then |
| targetJson=$targetJson"\"$UUID$pid\"" |
| fi |
| done |
| |
| targetJson=$targetJson"]" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"policy_ids\": $targetJson}" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: V2 GET /v2/policy-types/{policyTypeId} |
| # args(V2): <response-code> <policy-type-id> [<schema-file>] |
| # (Function for test scripts) |
| api_get_policy_type() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" != "V2" ]; then |
| __log_test_fail_not_supported |
| return 1 |
| fi |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <policy-type-id> [<schema-file>]" $@ |
| return 1 |
| fi |
| query="/v2/policy-types/$2" |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -eq 3 ]; then |
| |
| body=${res:0:${#res}-3} |
| |
| targetJson=$(< $3) |
| targetJson="{\"policy_schema\":$targetJson}" |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: GET /policy_schema |
| # args: <response-code> <policy-type-id> [<schema-file>] |
| # (Function for test scripts) |
| api_get_policy_schema() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| __log_test_fail_not_supported |
| return 1 |
| fi |
| |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<response-code> <policy-type-id> [<schema-file>]" $@ |
| return 1 |
| fi |
| query="/policy_schema?id=$2" |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -eq 3 ]; then |
| |
| body=${res:0:${#res}-3} |
| |
| targetJson=$(< $3) |
| |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: GET /policy_schemas |
| # args: <response-code> <ric-id>|NORIC [<schema-file>|NOFILE]* |
| # args(V2): <response-code> |
| # (Function for test scripts) |
| api_get_policy_schemas() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -ne 1 ]; then |
| __print_err "<response-code>" $@ |
| return 1 |
| fi |
| else |
| if [ $# -lt 2 ]; then |
| __print_err "<response-code> <ric-id>|NORIC [<schema-file>|NOFILE]*" $@ |
| return 1 |
| fi |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/policy-schemas" |
| else |
| query="/policy_schemas" |
| if [ $2 != "NORIC" ]; then |
| query=$query"?ric="$2 |
| fi |
| fi |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 2 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| |
| for file in ${@:3} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ $file == "NOFILE" ]; then |
| targetJson=$targetJson"{}" |
| else |
| targetJson=$targetJson$(< $file) |
| fi |
| done |
| |
| targetJson=$targetJson"]" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"policy_schemas\": $targetJson }" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: GET /policy_status and V2 GET /policies/{policy_id}/status |
| # arg: <response-code> <policy-id> (STD|STD2 <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>) |
| # (Function for test scripts) |
| api_get_policy_status() { |
| __log_test_start $@ |
| |
| if [ $# -lt 4 ] || [ $# -gt 5 ]; then |
| __print_err "<response-code> <policy-id> (STD <enforce-status>|EMPTY [<reason>|EMPTY])|(OSC <instance-status> <has-been-deleted>)" $@ |
| return 1 |
| fi |
| |
| targetJson="" |
| |
| if [ $3 == "STD" ]; then |
| targetJson="{\"enforceStatus\":\"$4\"" |
| if [ $# -eq 5 ]; then |
| targetJson=$targetJson",\"reason\":\"$5\"" |
| fi |
| targetJson=$targetJson"}" |
| elif [ $3 == "STD2" ]; then |
| if [ $4 == "EMPTY" ]; then |
| targetJson="{\"enforceStatus\":\"\"" |
| else |
| targetJson="{\"enforceStatus\":\"$4\"" |
| fi |
| if [ $# -eq 5 ]; then |
| if [ $5 == "EMPTY" ]; then |
| targetJson=$targetJson",\"enforceReason\":\"\"" |
| else |
| targetJson=$targetJson",\"enforceReason\":\"$5\"" |
| fi |
| fi |
| targetJson=$targetJson"}" |
| elif [ $3 == "OSC" ]; then |
| targetJson="{\"instance_status\":\"$4\"" |
| if [ $# -eq 5 ]; then |
| targetJson=$targetJson",\"has_been_deleted\":\"$5\"" |
| fi |
| targetJson=$targetJson",\"created_at\":\"????\"}" |
| else |
| __print_err "<response-code> (STD <enforce-status> [<reason>])|(OSC <instance-status> <has-been-deleted>)" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/policies/$UUID$2/status" |
| targetJson="{\"last_modified\":\"????\",\"status\":$targetJson}" |
| else |
| query="/policy_status?id="$UUID$2 |
| fi |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| body=${res:0:${#res}-3} |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: GET /policy_types and V2 GET /v2/policy-types |
| # args: <response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]] |
| # (Function for test scripts) |
| api_get_policy_types() { |
| __log_test_start $@ |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [<ric-id>|NORIC [<policy-type-id>|EMPTY [<policy-type-id>]*]]" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -eq 1 ]; then |
| query="/v2/policy-types" |
| elif [ $2 == "NORIC" ]; then |
| query="/v2/policy-types" |
| else |
| query="/v2/policy-types?ric_id=$2" |
| fi |
| else |
| if [ $# -eq 1 ]; then |
| query="/policy_types" |
| elif [ $2 == "NORIC" ]; then |
| query="/policy_types" |
| else |
| query="/policy_types?ric=$2" |
| fi |
| fi |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 2 ]; then |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| |
| for pid in ${@:3} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ $pid == "EMPTY" ]; then |
| pid="" |
| fi |
| targetJson=$targetJson"\"$pid\"" |
| done |
| |
| targetJson=$targetJson"]" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"policytype_ids\": $targetJson }" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| ######################################################### |
| #### Test case functions Health check |
| ######################################################### |
| |
| # API Test function: GET /status and V2 GET /status |
| # args: <response-code> |
| # (Function for test scripts) |
| api_get_status() { |
| __log_test_start $@ |
| if [ $# -ne 1 ]; then |
| __print_err "<response-code>" $@ |
| return 1 |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/status" |
| else |
| query="/status" |
| fi |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| ######################################################### |
| #### Test case functions RIC Repository |
| ######################################################### |
| |
| # API Test function: GET /ric and V2 GET /v2/rics/ric |
| # args: <reponse-code> <management-element-id> [<ric-id>] |
| # (V2) args: <reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [<string-of-ricinfo>] |
| # (V2) example of <string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4" |
| # (V2) format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids> |
| |
| |
| # (Function for test scripts) |
| api_get_ric() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| if [ $# -lt 3 ]; then |
| __print_err "<reponse-code> <management-element-id>|NOME <ric-id>|<NORIC> [string-of-ricinfo>]" $@ |
| return 1 |
| fi |
| search="" |
| if [ $2 != "NOME" ]; then |
| search="?managed_element_id="$2 |
| fi |
| if [ $3 != "NORIC" ]; then |
| if [ -z $search ]; then |
| search="?ric_id="$3 |
| else |
| search=$search"&ric_id="$3 |
| fi |
| fi |
| query="/v2/rics/ric"$search |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 3 ]; then |
| body=${res:0:${#res}-3} |
| res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$4" ) |
| if [ $res -ne 0 ]; then |
| __log_test_fail_general "Could not create target ric info json" |
| return 1 |
| fi |
| |
| targetJson=$(<./tmp/.tmp_rics.json) |
| targetJson=${targetJson:1:${#targetJson}-2} #remove array brackets |
| echo " TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| else |
| if [ $# -lt 2 ] || [ $# -gt 3 ]; then |
| __print_err "<reponse-code> <management-element-id> [<ric-id>]" $@ |
| return 1 |
| fi |
| |
| query="/ric?managedElementId="$2 |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -eq 3 ]; then |
| body=${res:0:${#res}-3} |
| if [ "$body" != "$3" ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| fi |
| __log_test_pass |
| return 0 |
| } |
| |
| # API test function: GET /rics and V2 GET /v2/rics |
| # args: <reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>] |
| # example of <space-separate-string-of-ricinfo> = "ricsim_g1_1:me1_ricsim_g1_1,me2_ricsim_g1_1:1,2,4 ricsim_g1_1:me2_........." |
| # format of ric-info: <ric-id>:<list-of-mes>:<list-of-policy-type-ids> |
| # (Function for test scripts) |
| api_get_rics() { |
| __log_test_start $@ |
| |
| if [ $# -lt 2 ]; then |
| __print_err "<reponse-code> <policy-type-id>|NOTYPE [<space-separate-string-of-ricinfo>]" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/rics" |
| if [ $2 != "NOTYPE" ]; then |
| query="/v2/rics?policytype_id="$2 |
| fi |
| else |
| query="/rics" |
| if [ $2 != "NOTYPE" ]; then |
| query="/rics?policyType="$2 |
| fi |
| fi |
| |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 2 ]; then |
| body=${res:0:${#res}-3} |
| if [ "$PMS_VERSION" == "V2" ]; then |
| res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V2" "$3" ) |
| else |
| res=$(python3 ../common/create_rics_json.py "./tmp/.tmp_rics.json" "V1" "$3" ) |
| fi |
| if [ $res -ne 0 ]; then |
| __log_test_fail_general "Could not create target ric info json" |
| return 1 |
| fi |
| |
| targetJson=$(<./tmp/.tmp_rics.json) |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"rics\": $targetJson }" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| ################################################################## |
| #### API Test case functions Service registry and supervision #### |
| ################################################################## |
| |
| # API test function: PUT /service and V2 PUT /service |
| # args: <response-code> <service-name> <keepalive-timeout> <callbackurl> |
| # (Function for test scripts) |
| api_put_service() { |
| __log_test_start $@ |
| if [ $# -ne 4 ]; then |
| __print_err "<response-code> <service-name> <keepalive-timeout> <callbackurl>" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/services" |
| json="{\"callback_url\": \""$4"\",\"keep_alive_interval_seconds\": \""$3"\",\"service_id\": \""$2"\"}" |
| else |
| query="/service" |
| json="{\"callbackUrl\": \""$4"\",\"keepAliveIntervalSeconds\": \""$3"\",\"serviceName\": \""$2"\"}" |
| fi |
| file="./tmp/.tmp.json" |
| echo "$json" > $file |
| |
| res="$(__do_curl_to_api PA PUT $query $file)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API test function: GET /services and V2 GET /v2/services |
| #args: <response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )] |
| # (Function for test scripts) |
| api_get_services() { |
| __log_test_start $@ |
| #Number of accepted parameters: 1, 2, 4, 7, 10, 13,... |
| paramError=1 |
| if [ $# -eq 1 ]; then |
| paramError=0 |
| elif [ $# -eq 2 ] && [ $2 != "NOSERVICE" ]; then |
| paramError=0 |
| elif [ $# -eq 5 ]; then |
| paramError=0 |
| elif [ $# -gt 5 ] && [ $2 == "NOSERVICE" ]; then |
| argLen=$(($#-2)) |
| if [ $(($argLen%3)) -eq 0 ]; then |
| paramError=0 |
| fi |
| fi |
| |
| if [ $paramError -ne 0 ]; then |
| __print_err "<response-code> [ (<query-service-name> <target-service-name> <keepalive-timeout> <callbackurl>) | (NOSERVICE <target-service-name> <keepalive-timeout> <callbackurl> [<target-service-name> <keepalive-timeout> <callbackurl>]* )]" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/services" |
| |
| if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then |
| query="/v2/services?service_id="$2 |
| fi |
| else |
| query="/services" |
| |
| if [ $# -gt 1 ] && [ $2 != "NOSERVICE" ]; then |
| query="/services?name="$2 |
| fi |
| fi |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -gt 2 ]; then |
| variableArgCount=$(($#-2)) |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| shift; shift; |
| cntr=0 |
| while [ $cntr -lt $variableArgCount ]; do |
| servicename=$1; shift; |
| timeout=$1; shift; |
| callback=$1; shift; |
| if [ $cntr -gt 0 ]; then |
| targetJson=$targetJson"," |
| fi |
| # timeSinceLastActivitySeconds value cannot be checked since value varies |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson=$targetJson"{\"service_id\": \""$servicename"\",\"keep_alive_interval_seconds\": "$timeout",\"time_since_last_activity_seconds\":\"????\",\"callback_url\": \""$callback"\"}" |
| else |
| targetJson=$targetJson"{\"serviceName\": \""$servicename"\",\"keepAliveIntervalSeconds\": "$timeout",\"timeSinceLastActivitySeconds\":\"????\",\"callbackUrl\": \""$callback"\"}" |
| fi |
| let cntr=cntr+3 |
| done |
| targetJson=$targetJson"]" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"service_list\": $targetJson }" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API test function: GET /services V2 GET /v2/services - (only checking service names) |
| # args: <response-code> [<service-name>]*" |
| # (Function for test scripts) |
| api_get_service_ids() { |
| __log_test_start $@ |
| |
| if [ $# -lt 1 ]; then |
| __print_err "<response-code> [<service-name>]*" $@ |
| return 1 |
| fi |
| |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/services" |
| else |
| query="/services" |
| fi |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| body=${res:0:${#res}-3} |
| targetJson="[" |
| for rapp in ${@:2} ; do |
| if [ "$targetJson" != "[" ]; then |
| targetJson=$targetJson"," |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson=$targetJson"{\"callback_url\":\"????\",\"keep_alive_interval_seconds\":\"????\",\"service_id\":\""$rapp"\",\"time_since_last_activity_seconds\":\"????\"}" |
| else |
| targetJson=$targetJson"{\"callbackUrl\":\"????\",\"keepAliveIntervalSeconds\":\"????\",\"serviceName\":\""$rapp"\",\"timeSinceLastActivitySeconds\":\"????\"}" |
| fi |
| done |
| |
| targetJson=$targetJson"]" |
| if [ "$PMS_VERSION" == "V2" ]; then |
| targetJson="{\"service_list\": $targetJson }" |
| fi |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API test function: DELETE /services and V2 DELETE /v2/services/{serviceId} |
| # args: <response-code> <service-name> |
| # (Function for test scripts) |
| api_delete_services() { |
| __log_test_start $@ |
| |
| if [ $# -ne 2 ]; then |
| __print_err "<response-code> <service-name>" $@ |
| return 1 |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/services/"$2 |
| else |
| query="/services?name="$2 |
| fi |
| res="$(__do_curl_to_api PA DELETE $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API test function: PUT /services/keepalive and V2 PUT /v2/services/{service_id}/keepalive |
| # args: <response-code> <service-name> |
| # (Function for test scripts) |
| api_put_services_keepalive() { |
| __log_test_start $@ |
| |
| if [ $# -ne 2 ]; then |
| __print_err "<response-code> <service-name>" $@ |
| return 1 |
| fi |
| if [ "$PMS_VERSION" == "V2" ]; then |
| query="/v2/services/$2/keepalive" |
| else |
| query="/services/keepalive?name="$2 |
| fi |
| |
| res="$(__do_curl_to_api PA PUT $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| ################################################################## |
| #### API Test case functions Configuration #### |
| ################################################################## |
| |
| # API Test function: PUT /v2/configuration |
| # args: <response-code> <config-file> |
| # (Function for test scripts) |
| api_put_configuration() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" != "V2" ]; then |
| __log_test_fail_not_supported |
| return 1 |
| fi |
| |
| if [ $# -ne 2 ]; then |
| __print_err "<response-code> <config-file>" $@ |
| return 1 |
| fi |
| if [ ! -f $2 ]; then |
| _log_test_fail_general "Config file "$2", does not exist" |
| return 1 |
| fi |
| inputJson=$(< $2) |
| inputJson="{\"config\":"$inputJson"}" |
| file="./tmp/.config.json" |
| echo $inputJson > $file |
| query="/v2/configuration" |
| res="$(__do_curl_to_api PA PUT $query $file)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |
| |
| # API Test function: GET /v2/configuration |
| # args: <response-code> [<config-file>] |
| # (Function for test scripts) |
| api_get_configuration() { |
| __log_test_start $@ |
| |
| if [ "$PMS_VERSION" != "V2" ]; then |
| __log_test_fail_not_supported |
| return 1 |
| fi |
| |
| if [ $# -lt 1 ] || [ $# -gt 2 ]; then |
| __print_err "<response-code> [<config-file>]" $@ |
| return 1 |
| fi |
| if [ ! -f $2 ]; then |
| _log_test_fail_general "Config file "$2" for comparison, does not exist" |
| return 1 |
| fi |
| |
| query="/v2/configuration" |
| res="$(__do_curl_to_api PA GET $query)" |
| status=${res:${#res}-3} |
| |
| if [ $status -ne $1 ]; then |
| __log_test_fail_status_code $1 $status |
| return 1 |
| fi |
| |
| if [ $# -eq 2 ]; then |
| |
| body=${res:0:${#res}-3} |
| |
| targetJson=$(< $2) |
| targetJson="{\"config\":"$targetJson"}" |
| echo "TARGET JSON: $targetJson" >> $HTTPLOG |
| res=$(python3 ../common/compare_json.py "$targetJson" "$body") |
| |
| if [ $res -ne 0 ]; then |
| __log_test_fail_body |
| return 1 |
| fi |
| fi |
| |
| __log_test_pass |
| return 0 |
| } |