test/common/kube_proxy_api_functions.sh

#!/bin/bash

#  ============LICENSE_START===============================================
#  Copyright (C) 2020 Nordix Foundation. All rights reserved.
#  ========================================================================
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#  ============LICENSE_END=================================================
#

# This is a script that contains container/service managemnt functions for Kube Http Proxy
# This http proxy is to provide full access for the test script to all adressable kube object in a clister

################ Test engine functions ################

# Create the image var used during the test
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__KUBEPROXY_imagesetup() {
	__check_and_create_image_var KUBEPROXY "KUBE_PROXY_IMAGE" "KUBE_PROXY_IMAGE_BASE" "KUBE_PROXY_IMAGE_TAG" LOCAL "$KUBE_PROXY_DISPLAY_NAME"
}

# Pull image from remote repo or use locally built image
# arg: <pull-policy-override> <pull-policy-original>
# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__KUBEPROXY_imagepull() {
	echo -e $RED"Image for app KUBEPROXY shall never be pulled from remote repo"$ERED
}

# Build image (only for simulator or interfaces stubs owned by the test environment)
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__KUBEPROXY_imagebuild() {
	cd ../http-https-proxy
	echo " Building KUBEPROXY - $KUBE_PROXY_DISPLAY_NAME - image: $KUBE_PROXY_IMAGE"
	docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $KUBE_PROXY_IMAGE . &> .dockererr
	if [ $? -eq 0 ]; then
		echo -e  $GREEN"  Build Ok"$EGREEN
		__retag_and_push_image KUBE_PROXY_IMAGE
		if [ $? -ne 0 ]; then
			exit 1
		fi
	else
		echo -e $RED"  Build Failed"$ERED
		((RES_CONF_FAIL++))
		cat .dockererr
		echo -e $RED"Exiting...."$ERED
		exit 1
	fi
}

# Generate a string for each included image using the app display name and a docker images format string
# If a custom image repo is used then also the source image from the local repo is listed
# arg: <docker-images-format-string> <file-to-append>
__KUBEPROXY_image_data() {
	echo -e "$KUBE_PROXY_DISPLAY_NAME\t$(docker images --format $1 $KUBE_PROXY_IMAGE)" >>   $2
	if [ ! -z "$KUBE_PROXY_IMAGE_SOURCE" ]; then
		echo -e "-- source image --\t$(docker images --format $1 $KUBE_PROXY_IMAGE_SOURCE)" >>   $2
	fi
}

# Scale kubernetes resources to zero
# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
# This function is called for apps fully managed by the test script
__KUBEPROXY_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest KUBEPROXY
}

# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
# This function is called for prestarted apps not managed by the test script.
__KUBEPROXY_kube_scale_zero_and_wait() {
	echo -e $RED" KUBEPROXY app is not scaled in this state"$ERED
}

# Delete all kube resouces for the app
# This function is called for apps managed by the test script.
__KUBEPROXY_kube_delete_all() {
	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest KUBEPROXY
}

# Store docker logs
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prexix>
__KUBEPROXY_store_docker_logs() {
	docker logs $KUBE_PROXY_APP_NAME > $1$2_kubeproxy.log 2>&1
}

#######################################################

#########################
### Http Proxy functions
#########################

# Start the Kube Http Proxy in the simulator group
# args: -
# (Function for test scripts)
start_kube_proxy() {

	echo -e $BOLD"Starting $KUBE_PROXY_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		# Check if app shall be fully managed by the test script
		__check_included_image "KUBEPROXY"
		retcode_i=$?

		# Check if app shall only be used by the testscipt
		__check_prestarted_image "KUBEPROXY"
		retcode_p=$?

		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
			echo -e $RED"The $KUBE_PROXY_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
			echo -e $RED"The $KUBE_PROXY_APP_NAME will not be started"$ERED
			exit
		fi
		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
			echo -e $RED"The $KUBE_PROXY_APP_NAME app is included both as managed and prestarted in this test script"$ERED
			echo -e $RED"The $KUBE_PROXY_APP_NAME will not be started"$ERED
			exit
		fi

		# Check if app shall be used - not managed - by the test script
		if [ $retcode_p -eq 0 ]; then
			echo -e " Using existing $KUBE_PROXY_APP_NAME deployment and service"
			echo " Setting KUBEPROXY replicas=1"
			__kube_scale deployment $KUBE_PROXY_APP_NAME $KUBE_SIM_NAMESPACE 1
		fi

		if [ $retcode_i -eq 0 ]; then
			echo -e " Creating $KUBE_PROXY_APP_NAME deployment and service"
			export KUBE_PROXY_APP_NAME
			export KUBE_PROXY_WEB_EXTERNAL_PORT
			export KUBE_PROXY_WEB_INTERNAL_PORT
			export KUBE_PROXY_EXTERNAL_PORT
			export KUBE_PROXY_INTERNAL_PORT
			export KUBE_SIM_NAMESPACE
			export KUBE_PROXY_IMAGE

			__kube_create_namespace $KUBE_SIM_NAMESPACE

			# Create service
			input_yaml=$SIM_GROUP"/"$KUBE_PROXY_COMPOSE_DIR"/"svc.yaml
			output_yaml=$PWD/tmp/proxy_svc.yaml
			__kube_create_instance service $KUBE_PROXY_APP_NAME $input_yaml $output_yaml

			# Create app
			input_yaml=$SIM_GROUP"/"$KUBE_PROXY_COMPOSE_DIR"/"app.yaml
			output_yaml=$PWD/tmp/proxy_app.yaml
			__kube_create_instance app $KUBE_PROXY_APP_NAME $input_yaml $output_yaml

		fi

		echo " Retrieving host and ports for service..."

		CLUSTER_KUBE_PROXY="http"

		#Finding host of the proxy
		echo "  Trying to find svc hostname..."
		CLUSTER_KUBE_PROXY_HOST=$(__kube_cmd_with_timeout "kubectl get svc $KUBE_PROXY_APP_NAME -n $KUBE_SIM_NAMESPACE  -o jsonpath={.status.loadBalancer.ingress[0].hostname}")


		if [ "$CLUSTER_KUBE_PROXY_HOST" == "localhost" ]; then
			#Local host found
			echo -e $YELLOW" The test environment svc $KUBE_PROXY_APP_NAME host is: $CLUSTER_KUBE_PROXY_HOST"$EYELLOW
			CLUSTER_KUBE_PROXY_HOST="127.0.0.1"
		else
			if [ -z "$CLUSTER_KUBE_PROXY_HOST" ]; then
				#Host of proxy not found, trying to find the ip....
				echo "  Trying to find svc ip..."
				CLUSTER_KUBE_PROXY_HOST=$(__kube_cmd_with_timeout "kubectl get svc $KUBE_PROXY_APP_NAME -n $KUBE_SIM_NAMESPACE  -o jsonpath={.status.loadBalancer.ingress[0].ip}")
				if [ ! -z "$CLUSTER_KUBE_PROXY_HOST" ]; then
					#Host ip found
					echo -e $YELLOW" The test environment svc $KUBE_PROXY_APP_NAME ip is: $CLUSTER_KUBE_PROXY_HOST."$EYELLOW
				fi
			else
				#Host or ip of proxy found
				echo -e $YELLOW" The test environment host/ip is: $CLUSTER_KUBE_PROXY_HOST."$EYELLOW
			fi
		fi
		if [ -z "$CLUSTER_KUBE_PROXY_HOST" ]; then
			#Host/ip of proxy not found, try to use the cluster and the nodeports of the proxy
			CLUSTER_KUBE_PROXY_HOST=$(kubectl config view -o jsonpath={.clusters[0].cluster.server} | awk -F[/:] '{print $4}')
			echo -e $YELLOW" The test environment cluster ip is: $CLUSTER_KUBE_PROXY_HOST."$EYELLOW
			CLUSTER_KUBE_PROXY_PORT=$(__kube_get_service_nodeport $KUBE_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")  # port for proxy access
			KUBE_PROXY_WEB_NODEPORT=$(__kube_get_service_nodeport $KUBE_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")  # web port, only for alive test
			echo " Cluster ip/host, cluster http nodeport, cluster web nodeport: $CLUSTER_KUBE_PROXY_HOST $CLUSTER_KUBE_PROXY_PORT $KUBE_PROXY_WEB_NODEPORT"
		else
			#Find the service ports of the proxy
			CLUSTER_KUBE_PROXY_PORT=$(__kube_get_service_port $KUBE_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")  # port for proxy access
			KUBE_PROXY_WEB_NODEPORT=$(__kube_get_service_port $KUBE_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")  # web port, only for alive test
			echo " Proxy ip/host, proxy http port, proxy web port: $CLUSTER_KUBE_PROXY_HOST $CLUSTER_KUBE_PROXY_PORT $KUBE_PROXY_WEB_NODEPORT"
		fi

		KUBE_PROXY_WEB_PATH=$CLUSTER_KUBE_PROXY"://"$CLUSTER_KUBE_PROXY_HOST":"$KUBE_PROXY_WEB_NODEPORT

		export KUBE_PROXY_PATH=  # Make sure proxy is empty when checking the proxy itself
		__check_service_start $KUBE_PROXY_APP_NAME $KUBE_PROXY_WEB_PATH$KUBE_PROXY_ALIVE_URL

		# Set proxy for all subsequent calls for all services etc
		export KUBE_PROXY_PATH=$CLUSTER_KUBE_PROXY"://"$CLUSTER_KUBE_PROXY_HOST":"$CLUSTER_KUBE_PROXY_PORT

	else
		echo $YELLOW" Kube http proxy not needed in docker test. App not started"
	fi
	echo ""

}