test/common/http_proxy_api_functions.sh

#!/bin/bash

#  ============LICENSE_START===============================================
#  Copyright (C) 2020 Nordix Foundation. All rights reserved.
#  ========================================================================
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#  ============LICENSE_END=================================================
#

# This is a script that contains container/service managemnt functions for Http Proxy

################ Test engine functions ################

# Create the image var used during the test
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__HTTPPROXY_imagesetup() {
	__check_and_create_image_var HTTPPROXY "HTTP_PROXY_IMAGE" "HTTP_PROXY_IMAGE_BASE" "HTTP_PROXY_IMAGE_TAG" LOCAL "$HTTP_PROXY_DISPLAY_NAME"
}

# Pull image from remote repo or use locally built image
# arg: <pull-policy-override> <pull-policy-original>
# <pull-policy-override> Shall be used for images allowing overriding. For example use a local image when test is started to use released images
# <pull-policy-original> Shall be used for images that does not allow overriding
# Both var may contain: 'remote', 'remote-remove' or 'local'
__HTTPPROXY_imagepull() {
	__check_and_pull_image $2 "$HTTP_PROXY_DISPLAY_NAME" $HTTP_PROXY_APP_NAME HTTP_PROXY_IMAGE
}

# Build image (only for simulator or interfaces stubs owned by the test environment)
# arg: <image-tag-suffix> (selects staging, snapshot, release etc)
# <image-tag-suffix> is present only for images with staging, snapshot,release tags
__HTTPPROXY_imagebuild() {
	cd ../$HTTP_PROXY_BUILD_DIR       # Note: Reusing same impl as for kube proxy
	echo " Building HTTPPROXY - $HTTP_PROXY_DISPLAY_NAME - image: $HTTP_PROXY_IMAGE"
	docker build  --build-arg NEXUS_PROXY_REPO=$NEXUS_PROXY_REPO -t $HTTP_PROXY_IMAGE . &> .dockererr
	if [ $? -eq 0 ]; then
		echo -e  $GREEN"  Build Ok"$EGREEN
		__retag_and_push_image HTTP_PROXY_IMAGE
		if [ $? -ne 0 ]; then
			exit 1
		fi
	else
		echo -e $RED"  Build Failed"$ERED
		((RES_CONF_FAIL++))
		cat .dockererr
		echo -e $RED"Exiting...."$ERED
		exit 1
	fi
}

# Generate a string for each included image using the app display name and a docker images format string
# If a custom image repo is used then also the source image from the local repo is listed
# arg: <docker-images-format-string> <file-to-append>
__HTTPPROXY_image_data() {
	echo -e "$HTTP_PROXY_DISPLAY_NAME\t$(docker images --format $1 $HTTP_PROXY_IMAGE)" >>   $2
	if [ ! -z "$HTTP_PROXY_IMAGE_SOURCE" ]; then
		echo -e "-- source image --\t$(docker images --format $1 $HTTP_PROXY_IMAGE_SOURCE)" >>   $2
	fi
}

# Scale kubernetes resources to zero
# All resources shall be ordered to be scaled to 0, if relevant. If not relevant to scale, then do no action.
# This function is called for apps fully managed by the test script
__HTTPPROXY_kube_scale_zero() {
	__kube_scale_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
}

# Scale kubernetes resources to zero and wait until this has been accomplished, if relevant. If not relevant to scale, then do no action.
# This function is called for prestarted apps not managed by the test script.
__HTTPPROXY_kube_scale_zero_and_wait() {
	echo -e $RED" HTTPPROXY replicas kept as is"$ERED
}

# Delete all kube resouces for the app
# This function is called for apps managed by the test script.
__HTTPPROXY_kube_delete_all() {
	__kube_delete_all_resources $KUBE_SIM_NAMESPACE autotest HTTPPROXY
}

# Store docker logs
# This function is called for apps managed by the test script.
# args: <log-dir> <file-prexix>
__HTTPPROXY_store_docker_logs() {
	docker logs $HTTP_PROXY_APP_NAME > $1$2_httpproxy.log 2>&1
}

#######################################################


## Access to Http Proxy Receiver
# Host name may be changed if app started by kube
# Direct access from script
HTTP_PROXY_HTTPX="http"
HTTP_PROXY_HOST_NAME=$LOCALHOST_NAME
HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT

#########################
### Http Proxy functions
#########################

# All calls to httpproxy will be directed to the http interface
# args: -
# (Function for test scripts)
use_http_proxy_http() {
	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD http $EBOLD"
	HTTP_PROXY_HTTPX="http"
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_PORT

	echo ""
}

# All calls to httpproxy will be directed to the https interface
# args: -
# (Function for test scripts)
use_http_proxy_https() {
	echo -e $BOLD"$HTTP_PROXY_DISPLAY_NAME protocol setting"$EBOLD
	echo -e " Using $BOLD https $EBOLD"
	HTTP_PROXY_HTTPX="https"
	HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_SECURE_PORT

	echo ""
}

# Start the Http Proxy in the simulator group
# args: -
# (Function for test scripts)
start_http_proxy() {

	echo -e $BOLD"Starting $HTTP_PROXY_DISPLAY_NAME"$EBOLD

	if [ $RUNMODE == "KUBE" ]; then

		# Check if app shall be fully managed by the test script
		__check_included_image "HTTPPROXY"
		retcode_i=$?

		# Check if app shall only be used by the testscipt
		__check_prestarted_image "HTTPPROXY"
		retcode_p=$?

		if [ $retcode_i -ne 0 ] && [ $retcode_p -ne 0 ]; then
			echo -e $RED"The $HTTP_PROXY_APP_NAME app is not included as managed nor prestarted in this test script"$ERED
			echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
			exit
		fi
		if [ $retcode_i -eq 0 ] && [ $retcode_p -eq 0 ]; then
			echo -e $RED"The $HTTP_PROXY_APP_NAME app is included both as managed and prestarted in this test script"$ERED
			echo -e $RED"The $HTTP_PROXY_APP_NAME will not be started"$ERED
			exit
		fi

		# Check if app shall be used - not managed - by the test script
		if [ $retcode_p -eq 0 ]; then
			echo -e " Using existing $HTTP_PROXY_APP_NAME deployment and service"
			echo " Setting HTTPPROXY replicas=1"
			__kube_scale deployment $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE 1
		fi

		if [ $retcode_i -eq 0 ]; then
			echo -e " Creating $HTTP_PROXY_APP_NAME deployment and service"
			export HTTP_PROXY_APP_NAME

			export HTTP_PROXY_WEB_EXTERNAL_PORT
			export HTTP_PROXY_WEB_INTERNAL_PORT
			export HTTP_PROXY_EXTERNAL_PORT
			export HTTP_PROXY_INTERNAL_PORT

			export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
			export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
			export HTTP_PROXY_EXTERNAL_SECURE_PORT
			export HTTP_PROXY_INTERNAL_SECURE_PORT

			export KUBE_SIM_NAMESPACE
			export HTTP_PROXY_IMAGE

			__kube_create_namespace $KUBE_SIM_NAMESPACE

			# Create service
			input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"svc.yaml
			output_yaml=$PWD/tmp/proxy_svc.yaml
			__kube_create_instance service $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

			# Create app
			input_yaml=$SIM_GROUP"/"$HTTP_PROXY_COMPOSE_DIR"/"app.yaml
			output_yaml=$PWD/tmp/proxy_app.yaml
			__kube_create_instance app $HTTP_PROXY_APP_NAME $input_yaml $output_yaml

		fi

		echo " Retrieving host and ports for service..."
		HTTP_PROXY_HOST_NAME=$(__kube_get_service_host $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE)
		HTTP_PROXY_WEB_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "web")
		HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "webs")

		HTTP_PROXY_EXTERNAL_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "http")
		HTTP_PROXY_EXTERNAL_SECURE_PORT=$(__kube_get_service_port $HTTP_PROXY_APP_NAME $KUBE_SIM_NAMESPACE "https")

		if [ $HTTP_PROXY_HTTPX == "http" ]; then
			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_PORT
			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_PORT
			HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

			echo " Host IP, http port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_PORT"
		else
			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_EXTERNAL_SECURE_PORT
			HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME"."$KUBE_SIM_NAMESPACE

			echo " Host IP, https port: $HTTP_PROXY_HOST_NAME $HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT"
		fi

		__check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

	else
		# Check if docker app shall be fully managed by the test script
		__check_included_image 'HTTPPROXY'
		if [ $? -eq 1 ]; then
			echo -e $RED"The Http Proxy app is not included in this test script"$ERED
			echo -e $RED"The Http Proxy will not be started"$ERED
			exit
		fi

		export HTTP_PROXY_APP_NAME
		export HTTP_PROXY_EXTERNAL_PORT
		export HTTP_PROXY_INTERNAL_PORT
		export HTTP_PROXY_EXTERNAL_SECURE_PORT
		export HTTP_PROXY_INTERNAL_SECURE_PORT
		export HTTP_PROXY_WEB_EXTERNAL_PORT
		export HTTP_PROXY_WEB_INTERNAL_PORT
		export HTTP_PROXY_WEB_EXTERNAL_SECURE_PORT
		export HTTP_PROXY_WEB_INTERNAL_SECURE_PORT
		export DOCKER_SIM_NWNAME

		export HTTP_PROXY_DISPLAY_NAME

		__start_container $HTTP_PROXY_COMPOSE_DIR "" NODOCKERARGS 1 $HTTP_PROXY_APP_NAME

		if [ $HTTP_PROXY_HTTPX == "http" ]; then
			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_PORT
		else
			HTTP_PROXY_PATH=$HTTP_PROXY_HTTPX"://"$HTTP_PROXY_HOST_NAME":"$HTTP_PROXY_EXTERNAL_SECURE_PORT
		fi
        __check_service_start $HTTP_PROXY_APP_NAME $HTTP_PROXY_PATH$HTTP_PROXY_ALIVE_URL

		if [ $HTTP_PROXY_HTTPX == "http" ]; then
			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_PORT
		else
			HTTP_PROXY_CONFIG_PORT=$HTTP_PROXY_INTERNAL_SECURE_PORT
		fi
		HTTP_PROXY_CONFIG_HOST_NAME=$HTTP_PROXY_APP_NAME

	fi
	echo ""
}