| .. This work is licensed under a Creative Commons Attribution 4.0 International License. |
| .. SPDX-License-Identifier: CC-BY-4.0 |
| .. CAUTION: this document is generated from source in doc/src/rtd. |
| .. To make changes edit the source and recompile the document. |
| .. Do NOT make changes directly to .rst or .md files. |
| |
| ============================================================================================ |
| Configuration and Deployment |
| ============================================================================================ |
| |
| |
| OVERVIEW |
| ======== |
| |
| The RIC Message Router (RMR) is a library for peer-to-peer |
| communication. Applications use the library to send and |
| receive messages where the message routing and endpoint |
| selection is based on the message type rather than DNS host |
| name-IP port combinations. |
| |
| This document contains information regarding the |
| configuration of RMR when it is embedded by a *user |
| application* . RMR itself is a library, not a deployable |
| entity. |
| |
| |
| Configuration |
| ------------- |
| |
| Many aspects of RMR behavior are controlled via environment |
| variables. These values are read when a user application |
| invokes the RMR initialization function. This allows these |
| variables to be set before the application is started as a |
| function of the true environment, or set by the application |
| as a means for the application to influence RMR's behaviour. |
| The following is a list of environment variables which RMR |
| recognizes. Also see the main RMR manual page in the |
| development package for more details. |
| |
| .. list-table:: |
| :widths: auto |
| :header-rows: 0 |
| :class: borderless |
| |
| * - **RMR_ASYNC_CONN** |
| - |
| Allows the async connection mode to be turned off (by setting |
| the value to 0). When set to 1, or missing from the |
| environment, RMR will invoke the connection interface in the |
| transport mechanism using the non-blocking (async) mode. This |
| will likely result in many "soft failures" (retry) until the |
| connection is established, but allows the application to |
| continue unimpeded should the connection be slow to set up. |
| |
| * - **RMR_BIND_IF** |
| - |
| This provides the interface that RMR will bind listen ports |
| to, allowing for a single interface to be used rather than |
| listening across all interfaces. This should be the IP |
| address assigned to the interface that RMR should listen on, |
| and if not defined RMR will listen on all interfaces. |
| |
| * - **RMR_CTL_PORT** |
| - |
| This variable defines the port that RMR should open for |
| communications with Route Manager, and other RMR control |
| applications. If not defined, the port 4561 is assumed. |
| |
| Previously, the ``RMR_RTG_SVC`` (route table generator |
| service port) was used to define this port. However, a future |
| version of Route Manager will require RMR to connect and |
| request tables, thus that variable is now used to supply the |
| Route Manager's well-known address and port. |
| |
| To maintain backwards compatibility with the older Route |
| Manager versions, the presence of this variable in the |
| environment will shift RMR's behaviour with respect to the |
| default value used when ``RMR_RTG_SVC`` is **not** defined. |
| |
| When ``RMR_CTL_PORT`` is **defined:** RMR assumes that Route |
| Manager requires RMR to connect and request table updates is |
| made, and the default well-known address for Route manager is |
| used (routemgr:4561). |
| |
| When ``RMR_CTL_PORT`` is **undefined:** RMR assumes that |
| Route Manager will connect and push table updates, thus the |
| default listen port (4561) is used. |
| |
| To avoid any possible misinterpretation and/or incorrect |
| assumptions on the part of RMR, it is recommended that both |
| the ``RMR_CTL_PORT`` and ``RMR_RTG_SVC`` be defined. In the |
| case where both variables are defined, RMR will behave |
| exactly as is communicated with the variable's values. |
| |
| * - **RMR_RTG_SVC** |
| - |
| The value of this variable depends on the Route Manager in |
| use. |
| |
| When the Route Manager is expecting to connect to an xAPP and |
| push route tables, this variable must indicate the |
| ``port`` which RMR should use to listen for these |
| connections. |
| |
| When the Route Manager is expecting RMR to connect and |
| request a table update during initialisation, the variable |
| should be the ``host`` of the Route Manager process. |
| |
| The ``RMR_CTL_PORT`` variable (added with the support of |
| sending table update requests to Route manager), controls the |
| behaviour if this variable is not set. See the description of |
| that variable for details. |
| |
| * - **RMR_HR_LOG** |
| - |
| By default RMR writes messages to standard error (incorrectly |
| referred to as log messages) in human readable format. If |
| this environment variable is set to 0, the format of standard |
| error messages might be written in some format not easily |
| read by humans. If missing, a value of 1 is assumed. |
| |
| * - **RMR_LOG_VLEVEL** |
| - |
| This is a numeric value which corresponds to the verbosity |
| level used to limit messages written to standard error. The |
| lower the number the less chatty RMR functions are during |
| execution. The following is the current relationship between |
| the value set on this variable and the messages written: |
| |
| |
| .. list-table:: |
| :widths: auto |
| :header-rows: 0 |
| :class: borderless |
| |
| * - **0** |
| - |
| Off; no messages of any sort are written. |
| |
| * - **1** |
| - |
| Only critical messages are written (default if this variable |
| does not exist) |
| |
| * - **2** |
| - |
| Errors and all messages written with a lower value. |
| |
| * - **3** |
| - |
| Warnings and all messages written with a lower value. |
| |
| * - **4** |
| - |
| Informational and all messages written with a lower value. |
| |
| * - **5** |
| - |
| Debugging mode -- all messages written, however this requires |
| RMR to have been compiled with debugging support enabled. |
| |
| |
| |
| * - **RMR_RTG_ISRAW** |
| - |
| **Deprecated.** Should be set to 1 if the route table |
| generator is sending "plain" messages (not using RMR to send |
| messages), 0 if the RTG is using RMR to send. The default is |
| 1 as we don't expect the RTG to use RMR. |
| |
| This variable is only recognised when using the NNG transport |
| library as it is not possible to support NNG "raw" |
| communications with other transport libraries. It is also |
| necessary to match the value of this variable with the |
| capabilities of the Route Manager; at some point in the |
| future RMR will assume that all Route Manager messages will |
| arrive via an RMR connection and will ignore this variable. |
| |
| * - **RMR_SEED_RT** |
| - |
| This is used to supply a static route table which can be used |
| for debugging, testing, or if no route table generator |
| process is being used to supply the route table. If not |
| defined, no static table is used and RMR will not report |
| *ready* until a table is received. The static route table may |
| contain both the route table (between newrt start and end |
| records), and the MEID map (between meid_map start and end |
| records). |
| |
| * - **RMR_SRC_ID** |
| - |
| This is either the name or IP address which is placed into |
| outbound messages as the message source. This will used when |
| an RMR based application uses the rmr_rts_msg() function to |
| return a response to the sender. If not supplied RMR will use |
| the hostname which in some container environments might not |
| be routable. |
| |
| The value of this variable is also used for Route Manager |
| messages which are sent via an RMR connection. |
| |
| * - **RMR_VCTL_FILE** |
| - |
| This supplies the name of a verbosity control file. The core |
| RMR functions do not produce messages unless there is a |
| critical failure. However, the route table collection thread, |
| not a part of the main message processing component, can |
| write additional messages to standard error. If this variable |
| is set, RMR will extract the verbosity level for these |
| messages (0 is silent) from the first line of the file. |
| Changes to the file are detected and thus the level can be |
| changed dynamically, however RMR will only suss out this |
| variable during initialisation, so it is impossible to enable |
| verbosity after startup. |
| |
| * - **RMR_WARNINGS** |
| - |
| If set to 1, RMR will write some warnings which are |
| non-performance impacting. If the variable is not defined, or |
| set to 0, RMR will not write these additional warnings. |
| |
| |