Initial commit of Tacker project for O2
Issue-ID: SMO-52
Change-Id: Ibbe210b4d3273289929ef345c082f711087fefcf
Signed-off-by: Toshiaki Takahashi <ts-takahashi@nec.com>
diff --git a/docs/installation-guide.rst b/docs/installation-guide.rst
new file mode 100644
index 0000000..d222e80
--- /dev/null
+++ b/docs/installation-guide.rst
@@ -0,0 +1,109 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+
+
+Installation Guide
+==================
+
+.. contents::
+ :depth: 3
+ :local:
+
+Abstract
+--------
+
+This document describes how to install the software for SMO O2, it's dependencies and required system resources.
+
+
+Version history
+
++--------------------+--------------------+--------------------+--------------------+
+| **Date** | **Ver.** | **Author** | **Comment** |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| 20XX-XX-XX | 0.1.0 | | First draft |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| | 0.1.1 | | |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+| | 1.0 | | |
+| | | | |
+| | | | |
++--------------------+--------------------+--------------------+--------------------+
+
+
+Introduction
+------------
+
+.. <INTRODUCTION TO THE SCOPE AND INTENTION OF THIS DOCUMENT AS WELL AS TO THE SYSTEM TO BE INSTALLED>
+
+.<EXAMPLE>:
+
+This document describes the supported software and hardware configurations for the reference component as well as providing guidelines on how to install and configure such reference system.
+
+The audience of this document is assumed to have good knowledge in RAN network nd Linux system.
+
+
+Preface
+-------
+.. <DESCRIBE NEEDED PREREQUISITES, PLANNING, ETC.>
+
+<EXAMPLE>:
+
+Before starting the installation of <project name>, some planning must preceed.
+
+.. note:any preperation you need before setting up sotfware and hardware
+
+
+Hardware Requirements
+---------------------
+.. <PROVIDE A LIST OF MINIMUM HARDWARE REQUIREMENTS NEEDED FOR THE INSTALL>
+
+<EXAMPLE>:
+
+Following minimum hardware requirements must be met for installation of <project name>:
+
++--------------------+----------------------------------------------------+
+| **HW Aspect** | **Requirement** |
+| | |
++--------------------+----------------------------------------------------+
+| **# of servers** | |
++--------------------+----------------------------------------------------+
+| **CPU** | |
+| | |
++--------------------+----------------------------------------------------+
+| **RAM** | |
+| | |
++--------------------+----------------------------------------------------+
+| **Disk** | |
+| | |
++--------------------+----------------------------------------------------+
+| **NICs** | |
+| | |
+| | |
+| | |
+| | |
+| | |
++--------------------+----------------------------------------------------+
+
+
+
+Software Installation and Deployment
+------------------------------------
+.. <DESCRIBE THE FULL PROCEDURES FOR THE INSTALLATION OF THE O-RAN COMPONENT INSTALLATION AND DEPLOYMENT>
+
+<EXAMPLE>:
+
+This section describes the installation of the <project name> installation on the reference hardware.
+
+
+
+References
+----------
+.. <PROVIDE NEEDED/USEFUL REFERENCES>
+
+
+
+