blob: 379640eb88046fbfc152b954ea9e2e49d180f96d [file] [log] [blame]
/* vi: set sw=4 ts=4: */
/*
* linux/include/linux/ext2_fs.h
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#ifndef LINUX_EXT2_FS_H
#define LINUX_EXT2_FS_H 1
/*
* Special inode numbers
*/
#define EXT2_BAD_INO 1 /* Bad blocks inode */
#define EXT2_ROOT_INO 2 /* Root inode */
#define EXT2_ACL_IDX_INO 3 /* ACL inode */
#define EXT2_ACL_DATA_INO 4 /* ACL inode */
#define EXT2_BOOT_LOADER_INO 5 /* Boot loader inode */
#define EXT2_UNDEL_DIR_INO 6 /* Undelete directory inode */
#define EXT2_RESIZE_INO 7 /* Reserved group descriptors inode */
#define EXT2_JOURNAL_INO 8 /* Journal inode */
/* First non-reserved inode for old ext2 filesystems */
#define EXT2_GOOD_OLD_FIRST_INO 11
/*
* The second extended file system magic number
*/
#define EXT2_SUPER_MAGIC 0xEF53
/* Assume that user mode programs are passing in an ext2fs superblock, not
* a kernel struct super_block. This will allow us to call the feature-test
* macros from user land. */
#define EXT2_SB(sb) (sb)
/*
* Maximal count of links to a file
*/
#define EXT2_LINK_MAX 32000
/*
* Macro-instructions used to manage several block sizes
*/
#define EXT2_MIN_BLOCK_LOG_SIZE 10 /* 1024 */
#define EXT2_MAX_BLOCK_LOG_SIZE 16 /* 65536 */
#define EXT2_MIN_BLOCK_SIZE (1 << EXT2_MIN_BLOCK_LOG_SIZE)
#define EXT2_MAX_BLOCK_SIZE (1 << EXT2_MAX_BLOCK_LOG_SIZE)
#define EXT2_BLOCK_SIZE(s) (EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
EXT2_GOOD_OLD_INODE_SIZE : (s)->s_inode_size)
#define EXT2_FIRST_INO(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \
EXT2_GOOD_OLD_FIRST_INO : (s)->s_first_ino)
#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof(uint32_t))
/*
* Macro-instructions used to manage fragments
*/
#define EXT2_MIN_FRAG_SIZE EXT2_MIN_BLOCK_SIZE
#define EXT2_MAX_FRAG_SIZE EXT2_MAX_BLOCK_SIZE
#define EXT2_MIN_FRAG_LOG_SIZE EXT2_MIN_BLOCK_LOG_SIZE
#define EXT2_FRAG_SIZE(s) (EXT2_MIN_FRAG_SIZE << (s)->s_log_frag_size)
#define EXT2_FRAGS_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / EXT2_FRAG_SIZE(s))
/*
* ACL structures
*/
struct ext2_acl_header { /* Header of Access Control Lists */
uint32_t aclh_size;
uint32_t aclh_file_count;
uint32_t aclh_acle_count;
uint32_t aclh_first_acle;
};
struct ext2_acl_entry { /* Access Control List Entry */
uint32_t acle_size;
uint16_t acle_perms; /* Access permissions */
uint16_t acle_type; /* Type of entry */
uint16_t acle_tag; /* User or group identity */
uint16_t acle_pad1;
uint32_t acle_next; /* Pointer on next entry for the */
/* same inode or on next free entry */
};
/*
* Structure of a blocks group descriptor
*/
struct ext2_group_desc {
uint32_t bg_block_bitmap; /* Blocks bitmap block */
uint32_t bg_inode_bitmap; /* Inodes bitmap block */
uint32_t bg_inode_table; /* Inodes table block */
uint16_t bg_free_blocks_count; /* Free blocks count */
uint16_t bg_free_inodes_count; /* Free inodes count */
uint16_t bg_used_dirs_count; /* Directories count */
uint16_t bg_pad;
uint32_t bg_reserved[3];
};
/*
* Data structures used by the directory indexing feature
*
* Note: all of the multibyte integer fields are little endian.
*/
/*
* Note: dx_root_info is laid out so that if it should somehow get
* overlaid by a dirent the two low bits of the hash version will be
* zero. Therefore, the hash version mod 4 should never be 0.
* Sincerely, the paranoia department.
*/
struct ext2_dx_root_info {
uint32_t reserved_zero;
uint8_t hash_version; /* 0 now, 1 at release */
uint8_t info_length; /* 8 */
uint8_t indirect_levels;
uint8_t unused_flags;
};
#define EXT2_HASH_LEGACY 0
#define EXT2_HASH_HALF_MD4 1
#define EXT2_HASH_TEA 2
#define EXT2_HASH_FLAG_INCOMPAT 0x1
struct ext2_dx_entry {
uint32_t hash;
uint32_t block;
};
struct ext2_dx_countlimit {
uint16_t limit;
uint16_t count;
};
/*
* Macro-instructions used to manage group descriptors
*/
#define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_group)
#define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_group)
#define EXT2_INODES_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s)/EXT2_INODE_SIZE(s))
/* limits imposed by 16-bit value gd_free_{blocks,inode}_count */
#define EXT2_MAX_BLOCKS_PER_GROUP(s) ((1 << 16) - 8)
#define EXT2_MAX_INODES_PER_GROUP(s) ((1 << 16) - EXT2_INODES_PER_BLOCK(s))
#define EXT2_DESC_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (struct ext2_group_desc))
/*
* Constants relative to the data blocks
*/
#define EXT2_NDIR_BLOCKS 12
#define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS
#define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1)
#define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1)
#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1)
/*
* Inode flags
*/
#define EXT2_SECRM_FL 0x00000001 /* Secure deletion */
#define EXT2_UNRM_FL 0x00000002 /* Undelete */
#define EXT2_COMPR_FL 0x00000004 /* Compress file */
#define EXT2_SYNC_FL 0x00000008 /* Synchronous updates */
#define EXT2_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define EXT2_APPEND_FL 0x00000020 /* writes to file may only append */
#define EXT2_NODUMP_FL 0x00000040 /* do not dump file */
#define EXT2_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define EXT2_DIRTY_FL 0x00000100
#define EXT2_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define EXT2_NOCOMPR_FL 0x00000400 /* Access raw compressed data */
#define EXT2_ECOMPR_FL 0x00000800 /* Compression error */
/* End compression flags --- maybe not all used */
#define EXT2_BTREE_FL 0x00001000 /* btree format dir */
#define EXT2_INDEX_FL 0x00001000 /* hash-indexed directory */
#define EXT2_IMAGIC_FL 0x00002000
#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */
#define EXT2_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define EXT2_DIRSYNC_FL 0x00010000 /* Synchronous directory modifications */
#define EXT2_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define EXT3_EXTENTS_FL 0x00080000 /* Inode uses extents */
#define EXT2_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define EXT2_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define EXT2_FL_USER_MODIFIABLE 0x000080FF /* User modifiable flags */
/*
* ioctl commands
*/
#define EXT2_IOC_GETFLAGS _IOR('f', 1, long)
#define EXT2_IOC_SETFLAGS _IOW('f', 2, long)
#define EXT2_IOC_GETVERSION _IOR('v', 1, long)
#define EXT2_IOC_SETVERSION _IOW('v', 2, long)
/*
* Structure of an inode on the disk
*/
struct ext2_inode {
uint16_t i_mode; /* File mode */
uint16_t i_uid; /* Low 16 bits of Owner Uid */
uint32_t i_size; /* Size in bytes */
uint32_t i_atime; /* Access time */
uint32_t i_ctime; /* Creation time */
uint32_t i_mtime; /* Modification time */
uint32_t i_dtime; /* Deletion Time */
uint16_t i_gid; /* Low 16 bits of Group Id */
uint16_t i_links_count; /* Links count */
uint32_t i_blocks; /* Blocks count */
uint32_t i_flags; /* File flags */
union {
struct {
uint32_t l_i_reserved1;
} linux1;
struct {
uint32_t h_i_translator;
} hurd1;
struct {
uint32_t m_i_reserved1;
} masix1;
} osd1; /* OS dependent 1 */
uint32_t i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
uint32_t i_generation; /* File version (for NFS) */
uint32_t i_file_acl; /* File ACL */
uint32_t i_dir_acl; /* Directory ACL */
uint32_t i_faddr; /* Fragment address */
union {
struct {
uint8_t l_i_frag; /* Fragment number */
uint8_t l_i_fsize; /* Fragment size */
uint16_t i_pad1;
uint16_t l_i_uid_high; /* these 2 fields */
uint16_t l_i_gid_high; /* were reserved2[0] */
uint32_t l_i_reserved2;
} linux2;
struct {
uint8_t h_i_frag; /* Fragment number */
uint8_t h_i_fsize; /* Fragment size */
uint16_t h_i_mode_high;
uint16_t h_i_uid_high;
uint16_t h_i_gid_high;
uint32_t h_i_author;
} hurd2;
struct {
uint8_t m_i_frag; /* Fragment number */
uint8_t m_i_fsize; /* Fragment size */
uint16_t m_pad1;
uint32_t m_i_reserved2[2];
} masix2;
} osd2; /* OS dependent 2 */
};
/*
* Permanent part of an large inode on the disk
*/
struct ext2_inode_large {
uint16_t i_mode; /* File mode */
uint16_t i_uid; /* Low 16 bits of Owner Uid */
uint32_t i_size; /* Size in bytes */
uint32_t i_atime; /* Access time */
uint32_t i_ctime; /* Creation time */
uint32_t i_mtime; /* Modification time */
uint32_t i_dtime; /* Deletion Time */
uint16_t i_gid; /* Low 16 bits of Group Id */
uint16_t i_links_count; /* Links count */
uint32_t i_blocks; /* Blocks count */
uint32_t i_flags; /* File flags */
union {
struct {
uint32_t l_i_reserved1;
} linux1;
struct {
uint32_t h_i_translator;
} hurd1;
struct {
uint32_t m_i_reserved1;
} masix1;
} osd1; /* OS dependent 1 */
uint32_t i_block[EXT2_N_BLOCKS];/* Pointers to blocks */
uint32_t i_generation; /* File version (for NFS) */
uint32_t i_file_acl; /* File ACL */
uint32_t i_dir_acl; /* Directory ACL */
uint32_t i_faddr; /* Fragment address */
union {
struct {
uint8_t l_i_frag; /* Fragment number */
uint8_t l_i_fsize; /* Fragment size */
uint16_t i_pad1;
uint16_t l_i_uid_high; /* these 2 fields */
uint16_t l_i_gid_high; /* were reserved2[0] */
uint32_t l_i_reserved2;
} linux2;
struct {
uint8_t h_i_frag; /* Fragment number */
uint8_t h_i_fsize; /* Fragment size */
uint16_t h_i_mode_high;
uint16_t h_i_uid_high;
uint16_t h_i_gid_high;
uint32_t h_i_author;
} hurd2;
struct {
uint8_t m_i_frag; /* Fragment number */
uint8_t m_i_fsize; /* Fragment size */
uint16_t m_pad1;
uint32_t m_i_reserved2[2];
} masix2;
} osd2; /* OS dependent 2 */
uint16_t i_extra_isize;
uint16_t i_pad1;
};
#define i_size_high i_dir_acl
/*
* File system states
*/
#define EXT2_VALID_FS 0x0001 /* Unmounted cleanly */
#define EXT2_ERROR_FS 0x0002 /* Errors detected */
/*
* Mount flags
*/
#define EXT2_MOUNT_CHECK 0x0001 /* Do mount-time checks */
#define EXT2_MOUNT_GRPID 0x0004 /* Create files with directory's group */
#define EXT2_MOUNT_DEBUG 0x0008 /* Some debugging messages */
#define EXT2_MOUNT_ERRORS_CONT 0x0010 /* Continue on errors */
#define EXT2_MOUNT_ERRORS_RO 0x0020 /* Remount fs ro on errors */
#define EXT2_MOUNT_ERRORS_PANIC 0x0040 /* Panic on errors */
#define EXT2_MOUNT_MINIX_DF 0x0080 /* Mimics the Minix statfs */
#define EXT2_MOUNT_NO_UID32 0x0200 /* Disable 32-bit UIDs */
#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt
#define set_opt(o, opt) o |= EXT2_MOUNT_##opt
#define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \
EXT2_MOUNT_##opt)
/*
* Maximal mount counts between two filesystem checks
*/
#define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */
#define EXT2_DFL_CHECKINTERVAL 0 /* Don't use interval check */
/*
* Behaviour when detecting errors
*/
#define EXT2_ERRORS_CONTINUE 1 /* Continue execution */
#define EXT2_ERRORS_RO 2 /* Remount fs read-only */
#define EXT2_ERRORS_PANIC 3 /* Panic */
#define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE
/*
* Structure of the super block
*/
struct ext2_super_block {
uint32_t s_inodes_count; /* Inodes count */
uint32_t s_blocks_count; /* Blocks count */
uint32_t s_r_blocks_count; /* Reserved blocks count */
uint32_t s_free_blocks_count; /* Free blocks count */
uint32_t s_free_inodes_count; /* Free inodes count */
uint32_t s_first_data_block; /* First Data Block */
uint32_t s_log_block_size; /* Block size */
int32_t s_log_frag_size; /* Fragment size */
uint32_t s_blocks_per_group; /* # Blocks per group */
uint32_t s_frags_per_group; /* # Fragments per group */
uint32_t s_inodes_per_group; /* # Inodes per group */
uint32_t s_mtime; /* Mount time */
uint32_t s_wtime; /* Write time */
uint16_t s_mnt_count; /* Mount count */
int16_t s_max_mnt_count; /* Maximal mount count */
uint16_t s_magic; /* Magic signature */
uint16_t s_state; /* File system state */
uint16_t s_errors; /* Behaviour when detecting errors */
uint16_t s_minor_rev_level; /* minor revision level */
uint32_t s_lastcheck; /* time of last check */
uint32_t s_checkinterval; /* max. time between checks */
uint32_t s_creator_os; /* OS */
uint32_t s_rev_level; /* Revision level */
uint16_t s_def_resuid; /* Default uid for reserved blocks */
uint16_t s_def_resgid; /* Default gid for reserved blocks */
/*
* These fields are for EXT2_DYNAMIC_REV superblocks only.
*
* Note: the difference between the compatible feature set and
* the incompatible feature set is that if there is a bit set
* in the incompatible feature set that the kernel doesn't
* know about, it should refuse to mount the filesystem.
*
* e2fsck's requirements are more strict; if it doesn't know
* about a feature in either the compatible or incompatible
* feature set, it must abort and not try to meddle with
* things it doesn't understand...
*/
uint32_t s_first_ino; /* First non-reserved inode */
uint16_t s_inode_size; /* size of inode structure */
uint16_t s_block_group_nr; /* block group # of this superblock */
uint32_t s_feature_compat; /* compatible feature set */
uint32_t s_feature_incompat; /* incompatible feature set */
uint32_t s_feature_ro_compat; /* readonly-compatible feature set */
uint8_t s_uuid[16]; /* 128-bit uuid for volume */
char s_volume_name[16]; /* volume name */
char s_last_mounted[64]; /* directory where last mounted */
uint32_t s_algorithm_usage_bitmap; /* For compression */
/*
* Performance hints. Directory preallocation should only
* happen if the EXT2_FEATURE_COMPAT_DIR_PREALLOC flag is on.
*/
uint8_t s_prealloc_blocks; /* Nr of blocks to try to preallocate*/
uint8_t s_prealloc_dir_blocks; /* Nr to preallocate for dirs */
uint16_t s_reserved_gdt_blocks; /* Per group table for online growth */
/*
* Journaling support valid if EXT2_FEATURE_COMPAT_HAS_JOURNAL set.
*/
uint8_t s_journal_uuid[16]; /* uuid of journal superblock */
uint32_t s_journal_inum; /* inode number of journal file */
uint32_t s_journal_dev; /* device number of journal file */
uint32_t s_last_orphan; /* start of list of inodes to delete */
uint32_t s_hash_seed[4]; /* HTREE hash seed */
uint8_t s_def_hash_version; /* Default hash version to use */
uint8_t s_jnl_backup_type; /* Default type of journal backup */
uint16_t s_reserved_word_pad;
uint32_t s_default_mount_opts;
uint32_t s_first_meta_bg; /* First metablock group */
uint32_t s_mkfs_time; /* When the filesystem was created */
uint32_t s_jnl_blocks[17]; /* Backup of the journal inode */
uint32_t s_reserved[172]; /* Padding to the end of the block */
};
/*
* Codes for operating systems
*/
#define EXT2_OS_LINUX 0
#define EXT2_OS_HURD 1
#define EXT2_OS_MASIX 2
#define EXT2_OS_FREEBSD 3
#define EXT2_OS_LITES 4
/*
* Revision levels
*/
#define EXT2_GOOD_OLD_REV 0 /* The good old (original) format */
#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */
#define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV
#define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV
#define EXT2_GOOD_OLD_INODE_SIZE 128
/*
* Journal inode backup types
*/
#define EXT3_JNL_BACKUP_BLOCKS 1
/*
* Feature set definitions
*/
#define EXT2_HAS_COMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_feature_compat & (mask) )
#define EXT2_HAS_RO_COMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_feature_ro_compat & (mask) )
#define EXT2_HAS_INCOMPAT_FEATURE(sb,mask) \
( EXT2_SB(sb)->s_feature_incompat & (mask) )
#define EXT2_FEATURE_COMPAT_DIR_PREALLOC 0x0001
#define EXT2_FEATURE_COMPAT_IMAGIC_INODES 0x0002
#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004
#define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008
#define EXT2_FEATURE_COMPAT_RESIZE_INODE 0x0010
#define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020
#define EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001
#define EXT2_FEATURE_RO_COMPAT_LARGE_FILE 0x0002
/* #define EXT2_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 not used */
#define EXT2_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002
#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */
#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */
#define EXT2_FEATURE_INCOMPAT_META_BG 0x0010
#define EXT3_FEATURE_INCOMPAT_EXTENTS 0x0040
#define EXT2_FEATURE_COMPAT_SUPP 0
#define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_FILETYPE)
#define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER| \
EXT2_FEATURE_RO_COMPAT_LARGE_FILE| \
EXT2_FEATURE_RO_COMPAT_BTREE_DIR)
/*
* Default values for user and/or group using reserved blocks
*/
#define EXT2_DEF_RESUID 0
#define EXT2_DEF_RESGID 0
/*
* Default mount options
*/
#define EXT2_DEFM_DEBUG 0x0001
#define EXT2_DEFM_BSDGROUPS 0x0002
#define EXT2_DEFM_XATTR_USER 0x0004
#define EXT2_DEFM_ACL 0x0008
#define EXT2_DEFM_UID16 0x0010
#define EXT3_DEFM_JMODE 0x0060
#define EXT3_DEFM_JMODE_DATA 0x0020
#define EXT3_DEFM_JMODE_ORDERED 0x0040
#define EXT3_DEFM_JMODE_WBACK 0x0060
/*
* Structure of a directory entry
*/
#define EXT2_NAME_LEN 255
struct ext2_dir_entry {
uint32_t inode; /* Inode number */
uint16_t rec_len; /* Directory entry length */
uint16_t name_len; /* Name length */
char name[EXT2_NAME_LEN]; /* File name */
};
/*
* The new version of the directory entry. Since EXT2 structures are
* stored in intel byte order, and the name_len field could never be
* bigger than 255 chars, it's safe to reclaim the extra byte for the
* file_type field.
*/
struct ext2_dir_entry_2 {
uint32_t inode; /* Inode number */
uint16_t rec_len; /* Directory entry length */
uint8_t name_len; /* Name length */
uint8_t file_type;
char name[EXT2_NAME_LEN]; /* File name */
};
/*
* Ext2 directory file types. Only the low 3 bits are used. The
* other bits are reserved for now.
*/
#define EXT2_FT_UNKNOWN 0
#define EXT2_FT_REG_FILE 1
#define EXT2_FT_DIR 2
#define EXT2_FT_CHRDEV 3
#define EXT2_FT_BLKDEV 4
#define EXT2_FT_FIFO 5
#define EXT2_FT_SOCK 6
#define EXT2_FT_SYMLINK 7
#define EXT2_FT_MAX 8
/*
* EXT2_DIR_PAD defines the directory entries boundaries
*
* NOTE: It must be a multiple of 4
*/
#define EXT2_DIR_PAD 4
#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1)
#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \
~EXT2_DIR_ROUND)
#endif