examples/devfsd.conf - codeaurora/busybox - Gitiles

 # Sample /etc/devfsd.conf configuration file.
 # Richard Gooch  <rgooch@atnf.csiro.au>		17-FEB-2002
 #
 # adapted for busybox devfsd implementation by Tito <farmatito@tiscali.it>
 #
 # Enable full compatibility mode for old device names. You may comment these
 # out if you don't use the old device names. Make sure you know what you're
 # doing!
 REGISTER	.*		MKOLDCOMPAT
 UNREGISTER	.*		RMOLDCOMPAT

 # You may comment out the above and uncomment the following if you've
 # configured your system to use the original "new" devfs names or the really
 # new names
 #REGISTER	^vc/		MKOLDCOMPAT
 #UNREGISTER	^vc/		RMOLDCOMPAT
 #REGISTER	^pty/		MKOLDCOMPAT
 #UNREGISTER	^pty/		RMOLDCOMPAT
 #REGISTER	^misc/		MKOLDCOMPAT
 #UNREGISTER	^misc/		RMOLDCOMPAT

 # You may comment these out if you don't use the original "new" names
 REGISTER	.*		MKNEWCOMPAT
 UNREGISTER	.*		RMNEWCOMPAT

 # Enable module autoloading. You may comment this out if you don't use
 # autoloading
 # Not supported by busybox
 #LOOKUP		.*		MODLOAD
 # Maybe one of these works for busybox
 #LOOKUP		.*		EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs *
 #REGISTER	.*		EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs *

 # Uncomment the following if you want to set the group to "tty" for the
 # pseudo-tty devices. This is necessary so that mesg(1) can later be used to
 # enable/disable talk requests and wall(1) messages.
 REGISTER	^pty/s.*	PERMISSIONS	-1.tty	0600
 #REGISTER	^pts/.*		PERMISSIONS	-1.tty	0600

 # Restoring /dev/log on startup would trigger the minilogd/initlog deadlock
 # (minilogd falsely assuming syslogd has been started).
 REGISTER	^log$		IGNORE
 CREATE		^log$		IGNORE
 CHANGE		^log$		IGNORE
 DELETE		^log$		IGNORE

 #
 # Uncomment this if you want permissions to be saved and restored
 # Do not do this for pseudo-terminal devices
 REGISTER	^pt[sy]		IGNORE
 CREATE		^pt[sy]		IGNORE
 CHANGE		^pt[sy]		IGNORE
 DELETE		^pt[sy]		IGNORE
 REGISTER	.*		COPY	/lib/dev-state/$devname $devpath
 CREATE		.*		COPY	$devpath /lib/dev-state/$devname
 CHANGE		.*		COPY	$devpath /lib/dev-state/$devname
 #DELETE		.*		CFUNCTION GLOBAL unlink /lib/dev-state/$devname
 # Busybox
 DELETE		.*		EXECUTE /bin/rm -f		/lib/dev-state/$devname

 RESTORE		/lib/dev-state

 #
 # Uncomment this if you want the old /dev/cdrom symlink
 #REGISTER	^cdroms/cdrom0$	CFUNCTION GLOBAL mksymlink $devname cdrom
 #UNREGISTER	^cdroms/cdrom0$	CFUNCTION GLOBAL unlink cdrom
 # busybox
 REGISTER	^cdroms/cdrom0$	EXECUTE /bin/ln -sf $devname cdrom
 UNREGISTER	^cdroms/cdrom0$	EXECUTE /bin/rm -f cdrom


 #REGISTER	^v4l/video0$	CFUNCTION GLOBAL mksymlink v4l/video0 video
 #UNREGISTER	^v4l/video0$	CFUNCTION GLOBAL unlink video
 #REGISTER	^radio0$	CFUNCTION GLOBAL mksymlink radio0 radio
 #UNREGISTER	^radio0$	CFUNCTION GLOBAL unlink radio
 # Busybox
 REGISTER	^v4l/video0$	EXECUTE /bin/ln -sf v4l/video0 video
 UNREGISTER	^v4l/video0$	EXECUTE /bin/rm -f video
 REGISTER	^radio0$		EXECUTE /bin/ln -sf  radio0 radio
 UNREGISTER	^radio0$		EXECUTE /bin/rm -f radio

 # ALSA stuff
 # Not supported by busybox
 #LOOKUP 		snd 		MODLOAD ACTION snd
 # Maybe this works for busybox
 #LOOKUP			snd 		EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs snd

 # Uncomment this to let PAM manage devfs
 #REGISTER	.*		CFUNCTION /lib/security/pam_console_apply_devfsd.so pam_console_apply_single $devpath

 # Uncomment this to manage USB mouse
 #REGISTER	^input/mouse0$	CFUNCTION GLOBAL mksymlink $devname usbmouse
 #UNREGISTER	^input/mouse0$	CFUNCTION GLOBAL unlink usbmouse
 # Busybox
 REGISTER	^input/mice$	EXECUTE /bin/ln -sf $devname usbmouse
 UNREGISTER	^input/mice$	EXECUTE /bin/rm -f usbmouse

 # If you have removable media and want to force media revalidation when looking
 # up new or old compatibility names, uncomment the following lines
 # SCSI NEWCOMPAT  /dev/sd/* names
 LOOKUP		^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
 # SCSI OLDCOMPAT  /dev/sd?? names
 LOOKUP		^(sd[a-z]+)[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
 # IDE NEWCOMPAT   /dev/ide/hd/* names
 LOOKUP		^(ide/hd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
 # IDE OLDCOMPAT   /dev/hd?? names
 LOOKUP		^(hd[a-z])[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
 # IDE-SCSI NEWCOMPAT  /dev/sd/* names
 #LOOKUP		^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
 # SCSI OLDCOMPAT  /dev/scd? names
 LOOKUP		^(scd+)[0-9]+$	EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1


 REGISTER ^dvb/card[0-9]+/[^/]+$ PERMISSIONS root.video 0660
 # Busybox
 #REGISTER	^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$	CFUNCTION GLOBAL mksymlink /dev/$devname ost/\2\1
 #UNREGISTER	^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$	CFUNCTION GLOBAL unlink ost/\2\1
 REGISTER	^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$	EXECUTE /bin/ln -sf /dev/$devname ost/\2\1
 UNREGISTER	^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$	EXECUTE /bin/rm -f ost/\2\1

 # Include package-generated files from /etc/devfs/conf.d
 # Supported by busybox
 #OPTIONAL_INCLUDE   /etc/devfs/conf.d/dvd.conf
 #INCLUDE   /etc/devfs/conf.d/dvd.conf
 #OPTIONAL_INCLUDE   /etc/devfs/conf.d/
 #INCLUDE   /etc/devfs/conf.d/

 #/etc/devfs/conf.d/dvd.conf
 #REGISTER	^ide/host0/bus1/target1/lun0/cd$	CFUNCTION GLOBAL mksymlink ide/host0/bus1/target1/lun0/cd dvd
 #UNREGISTER	^ide/host0/bus1/target1/lun0/cd$	CFUNCTION GLOBAL unlink dvd
 REGISTER	^ide/host0/bus1/target1/lun0/cd$	EXECUTE ln -sf ide/host0/bus1/target1/lun0/cd dvd
 UNREGISTER	^ide/host0/bus1/target1/lun0/cd$	EXECUTE rm -f dvd

 #/etc/devfs/conf.d/dynamic.conf
 # dynamic desktop and co

 REGISTER	.*/part.*	EXECUTE /etc/dynamic/scripts/part.script add $devpath
 UNREGISTER	.*/part.*	EXECUTE /etc/dynamic/scripts/part.script del $devpath

 REGISTER	v4l/video.*	EXECUTE /etc/dynamic/scripts/webcam.script add $devpath
 UNREGISTER	v4l/video.*	EXECUTE /etc/dynamic/scripts/webcam.script del $devpath

 REGISTER	usb/scanner.*	EXECUTE /etc/dynamic/scripts/scanner.script add $devpath
 UNREGISTER	usb/scanner.*	EXECUTE /etc/dynamic/scripts/scanner.script del $devpath

 REGISTER	usb/rio500	EXECUTE /etc/dynamic/scripts/rio500.script add $devpath
 UNREGISTER	usb/rio500	EXECUTE /etc/dynamic/scripts/rio500.script del $devpath

 REGISTER	usb/tts/[13579]	EXECUTE /etc/dynamic/scripts/visor.script add $devpath
 UNREGISTER	usb/tts/[13579]	EXECUTE /etc/dynamic/scripts/visor.script del $devpath

 REGISTER	(usb/lp.*|printers/.*)	EXECUTE /etc/dynamic/scripts/lp.script add $devpath
 UNREGISTER	(usb/lp.*|printers/.*)	EXECUTE /etc/dynamic/scripts/lp.script del $devpath

 #/etc/devfs/conf.d/modem.conf
 #REGISTER	^$	CFUNCTION GLOBAL mksymlink  modem
 #UNREGISTER	^$	CFUNCTION GLOBAL unlink modem
 REGISTER	^tts/0$	EXECUTE ln -sf  $devname modem
 UNREGISTER	^$	EXECUTE rm -f modem

 #/etc/devfs/conf.d/mouse.conf
 #REGISTER	^misc/psaux$	CFUNCTION GLOBAL mksymlink misc/psaux mouse
 #UNREGISTER	^misc/psaux$	CFUNCTION GLOBAL unlink mouse
 REGISTER	^misc/psaux$	EXECUTE ln -sf misc/psaux mouse
 UNREGISTER	^misc/psaux$	EXECUTE rm -f mouse

 #/etc/devfs/conf.d/psaux.conf
 #REGISTER	^misc/psaux$	CFUNCTION GLOBAL mksymlink misc/psaux psaux
 #UNREGISTER	^misc/psaux$	CFUNCTION GLOBAL unlink psaux
 REGISTER	^misc/psaux$	EXECUTE ln -sf misc/psaux psaux
 UNREGISTER	^misc/psaux$	EXECUTE rm -f psaux

 #/etc/devfs/conf.d/rdvd.conf
 REGISTER	^ide/host0/bus1/target1/lun0/cd$	EXECUTE /etc/dynamic/scripts/rawdevice.script add /dev/ide/host0/bus1/target1/lun0/cd /dev/rdvd
 UNREGISTER	^ide/host0/bus1/target1/lun0/cd$	EXECUTE /etc/dynamic/scripts/rawdevice.script del /dev/rdvd

 #/etc/devfs/conf.d/ttyS0.conf
 #REGISTER	^tts/0$	CFUNCTION GLOBAL mksymlink tts/0 ttyS0
 #UNREGISTER	^tts/0$	CFUNCTION GLOBAL unlink ttyS0
 REGISTER	^tts/0$	EXECUTE ln -sf $devname ttyS0
 UNREGISTER	^tts/0$	EXECUTE rm -f ttyS0
	# Sample /etc/devfsd.conf configuration file.
	# Richard Gooch <rgooch@atnf.csiro.au> 17-FEB-2002
	#
	# adapted for busybox devfsd implementation by Tito <farmatito@tiscali.it>
	#
	# Enable full compatibility mode for old device names. You may comment these
	# out if you don't use the old device names. Make sure you know what you're
	# doing!
	REGISTER .* MKOLDCOMPAT
	UNREGISTER .* RMOLDCOMPAT

	# You may comment out the above and uncomment the following if you've
	# configured your system to use the original "new" devfs names or the really
	# new names
	#REGISTER ^vc/ MKOLDCOMPAT
	#UNREGISTER ^vc/ RMOLDCOMPAT
	#REGISTER ^pty/ MKOLDCOMPAT
	#UNREGISTER ^pty/ RMOLDCOMPAT
	#REGISTER ^misc/ MKOLDCOMPAT
	#UNREGISTER ^misc/ RMOLDCOMPAT

	# You may comment these out if you don't use the original "new" names
	REGISTER .* MKNEWCOMPAT
	UNREGISTER .* RMNEWCOMPAT

	# Enable module autoloading. You may comment this out if you don't use
	# autoloading
	# Not supported by busybox
	#LOOKUP .* MODLOAD
	# Maybe one of these works for busybox
	#LOOKUP .* EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs *
	#REGISTER .* EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs *

	# Uncomment the following if you want to set the group to "tty" for the
	# pseudo-tty devices. This is necessary so that mesg(1) can later be used to
	# enable/disable talk requests and wall(1) messages.
	REGISTER ^pty/s.* PERMISSIONS -1.tty 0600
	#REGISTER ^pts/.* PERMISSIONS -1.tty 0600

	# Restoring /dev/log on startup would trigger the minilogd/initlog deadlock
	# (minilogd falsely assuming syslogd has been started).
	REGISTER ^log$ IGNORE
	CREATE ^log$ IGNORE
	CHANGE ^log$ IGNORE
	DELETE ^log$ IGNORE

	#
	# Uncomment this if you want permissions to be saved and restored
	# Do not do this for pseudo-terminal devices
	REGISTER ^pt[sy] IGNORE
	CREATE ^pt[sy] IGNORE
	CHANGE ^pt[sy] IGNORE
	DELETE ^pt[sy] IGNORE
	REGISTER .* COPY /lib/dev-state/$devname $devpath
	CREATE .* COPY $devpath /lib/dev-state/$devname
	CHANGE .* COPY $devpath /lib/dev-state/$devname
	#DELETE .* CFUNCTION GLOBAL unlink /lib/dev-state/$devname
	# Busybox
	DELETE .* EXECUTE /bin/rm -f /lib/dev-state/$devname

	RESTORE /lib/dev-state

	#
	# Uncomment this if you want the old /dev/cdrom symlink
	#REGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL mksymlink $devname cdrom
	#UNREGISTER ^cdroms/cdrom0$ CFUNCTION GLOBAL unlink cdrom
	# busybox
	REGISTER ^cdroms/cdrom0$ EXECUTE /bin/ln -sf $devname cdrom
	UNREGISTER ^cdroms/cdrom0$ EXECUTE /bin/rm -f cdrom


	#REGISTER ^v4l/video0$ CFUNCTION GLOBAL mksymlink v4l/video0 video
	#UNREGISTER ^v4l/video0$ CFUNCTION GLOBAL unlink video
	#REGISTER ^radio0$ CFUNCTION GLOBAL mksymlink radio0 radio
	#UNREGISTER ^radio0$ CFUNCTION GLOBAL unlink radio
	# Busybox
	REGISTER ^v4l/video0$ EXECUTE /bin/ln -sf v4l/video0 video
	UNREGISTER ^v4l/video0$ EXECUTE /bin/rm -f video
	REGISTER ^radio0$ EXECUTE /bin/ln -sf radio0 radio
	UNREGISTER ^radio0$ EXECUTE /bin/rm -f radio

	# ALSA stuff
	# Not supported by busybox
	#LOOKUP snd MODLOAD ACTION snd
	# Maybe this works for busybox
	#LOOKUP snd EXECUTE /sbin/modprobe -k -v -C /etc/modules.devfs snd

	# Uncomment this to let PAM manage devfs
	#REGISTER .* CFUNCTION /lib/security/pam_console_apply_devfsd.so pam_console_apply_single $devpath

	# Uncomment this to manage USB mouse
	#REGISTER ^input/mouse0$ CFUNCTION GLOBAL mksymlink $devname usbmouse
	#UNREGISTER ^input/mouse0$ CFUNCTION GLOBAL unlink usbmouse
	# Busybox
	REGISTER ^input/mice$ EXECUTE /bin/ln -sf $devname usbmouse
	UNREGISTER ^input/mice$ EXECUTE /bin/rm -f usbmouse

	# If you have removable media and want to force media revalidation when looking
	# up new or old compatibility names, uncomment the following lines
	# SCSI NEWCOMPAT /dev/sd/* names
	LOOKUP ^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
	# SCSI OLDCOMPAT /dev/sd?? names
	LOOKUP ^(sd[a-z]+)[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
	# IDE NEWCOMPAT /dev/ide/hd/* names
	LOOKUP ^(ide/hd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
	# IDE OLDCOMPAT /dev/hd?? names
	LOOKUP ^(hd[a-z])[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
	# IDE-SCSI NEWCOMPAT /dev/sd/* names
	#LOOKUP ^(sd/c[0-9]+b[0-9]+t[0-9]+u[0-9]+)p[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1
	# SCSI OLDCOMPAT /dev/scd? names
	LOOKUP ^(scd+)[0-9]+$ EXECUTE /bin/dd if=$mntpnt/\1 of=/dev/null count=1


	REGISTER ^dvb/card[0-9]+/[^/]+$ PERMISSIONS root.video 0660
	# Busybox
	#REGISTER ^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$ CFUNCTION GLOBAL mksymlink /dev/$devname ost/\2\1
	#UNREGISTER ^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$ CFUNCTION GLOBAL unlink ost/\2\1
	REGISTER ^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$ EXECUTE /bin/ln -sf /dev/$devname ost/\2\1
	UNREGISTER ^dvb/card([0-9]+)/([^/0-9]*)[0-9]+$ EXECUTE /bin/rm -f ost/\2\1

	# Include package-generated files from /etc/devfs/conf.d
	# Supported by busybox
	#OPTIONAL_INCLUDE /etc/devfs/conf.d/dvd.conf
	#INCLUDE /etc/devfs/conf.d/dvd.conf
	#OPTIONAL_INCLUDE /etc/devfs/conf.d/
	#INCLUDE /etc/devfs/conf.d/

	#/etc/devfs/conf.d/dvd.conf
	#REGISTER ^ide/host0/bus1/target1/lun0/cd$ CFUNCTION GLOBAL mksymlink ide/host0/bus1/target1/lun0/cd dvd
	#UNREGISTER ^ide/host0/bus1/target1/lun0/cd$ CFUNCTION GLOBAL unlink dvd
	REGISTER ^ide/host0/bus1/target1/lun0/cd$ EXECUTE ln -sf ide/host0/bus1/target1/lun0/cd dvd
	UNREGISTER ^ide/host0/bus1/target1/lun0/cd$ EXECUTE rm -f dvd

	#/etc/devfs/conf.d/dynamic.conf
	# dynamic desktop and co

	REGISTER ./part. EXECUTE /etc/dynamic/scripts/part.script add $devpath
	UNREGISTER ./part. EXECUTE /etc/dynamic/scripts/part.script del $devpath

	REGISTER v4l/video.* EXECUTE /etc/dynamic/scripts/webcam.script add $devpath
	UNREGISTER v4l/video.* EXECUTE /etc/dynamic/scripts/webcam.script del $devpath

	REGISTER usb/scanner.* EXECUTE /etc/dynamic/scripts/scanner.script add $devpath
	UNREGISTER usb/scanner.* EXECUTE /etc/dynamic/scripts/scanner.script del $devpath

	REGISTER usb/rio500 EXECUTE /etc/dynamic/scripts/rio500.script add $devpath
	UNREGISTER usb/rio500 EXECUTE /etc/dynamic/scripts/rio500.script del $devpath

	REGISTER usb/tts/[13579] EXECUTE /etc/dynamic/scripts/visor.script add $devpath
	UNREGISTER usb/tts/[13579] EXECUTE /etc/dynamic/scripts/visor.script del $devpath

	REGISTER (usb/lp.\|printers/.) EXECUTE /etc/dynamic/scripts/lp.script add $devpath
	UNREGISTER (usb/lp.\|printers/.) EXECUTE /etc/dynamic/scripts/lp.script del $devpath

	#/etc/devfs/conf.d/modem.conf
	#REGISTER ^$ CFUNCTION GLOBAL mksymlink modem
	#UNREGISTER ^$ CFUNCTION GLOBAL unlink modem
	REGISTER ^tts/0$ EXECUTE ln -sf $devname modem
	UNREGISTER ^$ EXECUTE rm -f modem

	#/etc/devfs/conf.d/mouse.conf
	#REGISTER ^misc/psaux$ CFUNCTION GLOBAL mksymlink misc/psaux mouse
	#UNREGISTER ^misc/psaux$ CFUNCTION GLOBAL unlink mouse
	REGISTER ^misc/psaux$ EXECUTE ln -sf misc/psaux mouse
	UNREGISTER ^misc/psaux$ EXECUTE rm -f mouse

	#/etc/devfs/conf.d/psaux.conf
	#REGISTER ^misc/psaux$ CFUNCTION GLOBAL mksymlink misc/psaux psaux
	#UNREGISTER ^misc/psaux$ CFUNCTION GLOBAL unlink psaux
	REGISTER ^misc/psaux$ EXECUTE ln -sf misc/psaux psaux
	UNREGISTER ^misc/psaux$ EXECUTE rm -f psaux

	#/etc/devfs/conf.d/rdvd.conf
	REGISTER ^ide/host0/bus1/target1/lun0/cd$ EXECUTE /etc/dynamic/scripts/rawdevice.script add /dev/ide/host0/bus1/target1/lun0/cd /dev/rdvd
	UNREGISTER ^ide/host0/bus1/target1/lun0/cd$ EXECUTE /etc/dynamic/scripts/rawdevice.script del /dev/rdvd

	#/etc/devfs/conf.d/ttyS0.conf
	#REGISTER ^tts/0$ CFUNCTION GLOBAL mksymlink tts/0 ttyS0
	#UNREGISTER ^tts/0$ CFUNCTION GLOBAL unlink ttyS0
	REGISTER ^tts/0$ EXECUTE ln -sf $devname ttyS0
	UNREGISTER ^tts/0$ EXECUTE rm -f ttyS0