| /* vi: set sw=4 ts=4: */ |
| /* |
| * Mini start-stop-daemon implementation(s) for busybox |
| * |
| * Written by Marek Michalkiewicz <marekm@i17linuxb.ists.pwr.wroc.pl>, |
| * Adapted for busybox David Kimdon <dwhedon@gordian.com> |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| |
| /* |
| This is how it is supposed to work: |
| |
| start-stop-daemon [OPTIONS] [--start|--stop] [[--] arguments...] |
| |
| One (only) of these must be given: |
| -S,--start Start |
| -K,--stop Stop |
| |
| Search for matching processes. |
| If --stop is given, stop all matching processes (by sending a signal). |
| If --start is given, start a new process unless a matching process was found. |
| |
| Options controlling process matching |
| (if multiple conditions are specified, all must match): |
| -u,--user USERNAME|UID Only consider this user's processes |
| -n,--name PROCESS_NAME Look for processes by matching PROCESS_NAME |
| with comm field in /proc/$PID/stat. |
| Only basename is compared: |
| "ntpd" == "./ntpd" == "/path/to/ntpd". |
| [TODO: can PROCESS_NAME be a full pathname? Should we require full match then |
| with /proc/$PID/exe or argv[0] (comm can't be matched, it never contains path)] |
| -x,--exec EXECUTABLE Look for processes that were started with this |
| command in /proc/$PID/exe and /proc/$PID/cmdline |
| (/proc/$PID/cmdline is a bbox extension) |
| Unlike -n, we match against the full path: |
| "ntpd" != "./ntpd" != "/path/to/ntpd" |
| -p,--pidfile PID_FILE Look for processes with PID from this file |
| |
| Options which are valid for --start only: |
| -x,--exec EXECUTABLE Program to run (1st arg of execvp). Mandatory. |
| -a,--startas NAME argv[0] (defaults to EXECUTABLE) |
| -b,--background Put process into background |
| -N,--nicelevel N Add N to process' nice level |
| -c,--chuid USER[:[GRP]] Change to specified user [and group] |
| -m,--make-pidfile Write PID to the pidfile |
| (both -m and -p must be given!) |
| |
| Options which are valid for --stop only: |
| -s,--signal SIG Signal to send (default:TERM) |
| -t,--test Exit with status 0 if process is found |
| (we don't actually start or stop daemons) |
| |
| Misc options: |
| -o,--oknodo Exit with status 0 if nothing is done |
| -q,--quiet Quiet |
| -v,--verbose Verbose |
| */ |
| //config:config START_STOP_DAEMON |
| //config: bool "start-stop-daemon" |
| //config: default y |
| //config: help |
| //config: start-stop-daemon is used to control the creation and |
| //config: termination of system-level processes, usually the ones |
| //config: started during the startup of the system. |
| //config: |
| //config:config FEATURE_START_STOP_DAEMON_FANCY |
| //config: bool "Support additional arguments" |
| //config: default y |
| //config: depends on START_STOP_DAEMON |
| //config: help |
| //config: Support additional arguments. |
| //config: -o|--oknodo ignored since we exit with 0 anyway |
| //config: -v|--verbose |
| //config: -N|--nicelevel N |
| //config: |
| //config:config FEATURE_START_STOP_DAEMON_LONG_OPTIONS |
| //config: bool "Enable long options" |
| //config: default y |
| //config: depends on START_STOP_DAEMON && LONG_OPTS |
| //config: help |
| //config: Support long options for the start-stop-daemon applet. |
| |
| //applet:IF_START_STOP_DAEMON(APPLET_ODDNAME(start-stop-daemon, start_stop_daemon, BB_DIR_SBIN, BB_SUID_DROP, start_stop_daemon)) |
| |
| //kbuild:lib-$(CONFIG_START_STOP_DAEMON) += start_stop_daemon.o |
| |
| //usage:#define start_stop_daemon_trivial_usage |
| //usage: "[OPTIONS] [-S|-K] ... [-- ARGS...]" |
| //usage:#define start_stop_daemon_full_usage "\n\n" |
| //usage: "Search for matching processes, and then\n" |
| //usage: "-K: stop all matching processes.\n" |
| //usage: "-S: start a process unless a matching process is found.\n" |
| //usage: IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( |
| //usage: "\nProcess matching:" |
| //usage: "\n -u,--user USERNAME|UID Match only this user's processes" |
| //usage: "\n -n,--name NAME Match processes with NAME" |
| //usage: "\n in comm field in /proc/PID/stat" |
| //usage: "\n -x,--exec EXECUTABLE Match processes with this command" |
| //usage: "\n in /proc/PID/{exe,cmdline}" |
| //usage: "\n -p,--pidfile FILE Match a process with PID from the file" |
| //usage: "\n All specified conditions must match" |
| //usage: "\n-S only:" |
| //usage: "\n -x,--exec EXECUTABLE Program to run" |
| //usage: "\n -a,--startas NAME Zeroth argument" |
| //usage: "\n -b,--background Background" |
| //usage: IF_FEATURE_START_STOP_DAEMON_FANCY( |
| //usage: "\n -N,--nicelevel N Change nice level" |
| //usage: ) |
| //usage: "\n -c,--chuid USER[:[GRP]] Change to user/group" |
| //usage: "\n -m,--make-pidfile Write PID to the pidfile specified by -p" |
| //usage: "\n-K only:" |
| //usage: "\n -s,--signal SIG Signal to send" |
| //usage: "\n -t,--test Match only, exit with 0 if a process is found" |
| //usage: "\nOther:" |
| //usage: IF_FEATURE_START_STOP_DAEMON_FANCY( |
| //usage: "\n -o,--oknodo Exit with status 0 if nothing is done" |
| //usage: "\n -v,--verbose Verbose" |
| //usage: ) |
| //usage: "\n -q,--quiet Quiet" |
| //usage: ) |
| //usage: IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( |
| //usage: "\nProcess matching:" |
| //usage: "\n -u USERNAME|UID Match only this user's processes" |
| //usage: "\n -n NAME Match processes with NAME" |
| //usage: "\n in comm field in /proc/PID/stat" |
| //usage: "\n -x EXECUTABLE Match processes with this command" |
| //usage: "\n command in /proc/PID/cmdline" |
| //usage: "\n -p FILE Match a process with PID from the file" |
| //usage: "\n All specified conditions must match" |
| //usage: "\n-S only:" |
| //usage: "\n -x EXECUTABLE Program to run" |
| //usage: "\n -a NAME Zeroth argument" |
| //usage: "\n -b Background" |
| //usage: IF_FEATURE_START_STOP_DAEMON_FANCY( |
| //usage: "\n -N N Change nice level" |
| //usage: ) |
| //usage: "\n -c USER[:[GRP]] Change to user/group" |
| //usage: "\n -m Write PID to the pidfile specified by -p" |
| //usage: "\n-K only:" |
| //usage: "\n -s SIG Signal to send" |
| //usage: "\n -t Match only, exit with 0 if a process is found" |
| //usage: "\nOther:" |
| //usage: IF_FEATURE_START_STOP_DAEMON_FANCY( |
| //usage: "\n -o Exit with status 0 if nothing is done" |
| //usage: "\n -v Verbose" |
| //usage: ) |
| //usage: "\n -q Quiet" |
| //usage: ) |
| |
| #include <sys/resource.h> |
| |
| /* Override ENABLE_FEATURE_PIDFILE */ |
| #define WANT_PIDFILE 1 |
| #include "libbb.h" |
| #include "common_bufsiz.h" |
| |
| struct pid_list { |
| struct pid_list *next; |
| pid_t pid; |
| }; |
| |
| enum { |
| CTX_STOP = (1 << 0), |
| CTX_START = (1 << 1), |
| OPT_BACKGROUND = (1 << 2), // -b |
| OPT_QUIET = (1 << 3), // -q |
| OPT_TEST = (1 << 4), // -t |
| OPT_MAKEPID = (1 << 5), // -m |
| OPT_a = (1 << 6), // -a |
| OPT_n = (1 << 7), // -n |
| OPT_s = (1 << 8), // -s |
| OPT_u = (1 << 9), // -u |
| OPT_c = (1 << 10), // -c |
| OPT_x = (1 << 11), // -x |
| OPT_p = (1 << 12), // -p |
| OPT_OKNODO = (1 << 13) * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -o |
| OPT_VERBOSE = (1 << 14) * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -v |
| OPT_NICELEVEL = (1 << 15) * ENABLE_FEATURE_START_STOP_DAEMON_FANCY, // -N |
| }; |
| #define QUIET (option_mask32 & OPT_QUIET) |
| #define TEST (option_mask32 & OPT_TEST) |
| |
| struct globals { |
| struct pid_list *found_procs; |
| char *userspec; |
| char *cmdname; |
| char *execname; |
| char *pidfile; |
| char *execname_cmpbuf; |
| unsigned execname_sizeof; |
| int user_id; |
| smallint signal_nr; |
| } FIX_ALIASING; |
| #define G (*(struct globals*)bb_common_bufsiz1) |
| #define userspec (G.userspec ) |
| #define cmdname (G.cmdname ) |
| #define execname (G.execname ) |
| #define pidfile (G.pidfile ) |
| #define user_id (G.user_id ) |
| #define signal_nr (G.signal_nr ) |
| #define INIT_G() do { \ |
| setup_common_bufsiz(); \ |
| user_id = -1; \ |
| signal_nr = 15; \ |
| } while (0) |
| |
| #ifdef OLDER_VERSION_OF_X |
| /* -x,--exec EXECUTABLE |
| * Look for processes with matching /proc/$PID/exe. |
| * Match is performed using device+inode. |
| */ |
| static int pid_is_exec(pid_t pid) |
| { |
| struct stat st; |
| char buf[sizeof("/proc/%u/exe") + sizeof(int)*3]; |
| |
| sprintf(buf, "/proc/%u/exe", (unsigned)pid); |
| if (stat(buf, &st) < 0) |
| return 0; |
| if (st.st_dev == execstat.st_dev |
| && st.st_ino == execstat.st_ino) |
| return 1; |
| return 0; |
| } |
| #endif |
| |
| static int pid_is_exec(pid_t pid) |
| { |
| ssize_t bytes; |
| char buf[sizeof("/proc/%u/cmdline") + sizeof(int)*3]; |
| char *procname, *exelink; |
| int match; |
| |
| procname = buf + sprintf(buf, "/proc/%u/exe", (unsigned)pid) - 3; |
| |
| exelink = xmalloc_readlink(buf); |
| match = (exelink && strcmp(execname, exelink) == 0); |
| free(exelink); |
| if (match) |
| return match; |
| |
| strcpy(procname, "cmdline"); |
| bytes = open_read_close(buf, G.execname_cmpbuf, G.execname_sizeof); |
| if (bytes > 0) { |
| G.execname_cmpbuf[bytes] = '\0'; |
| return strcmp(execname, G.execname_cmpbuf) == 0; |
| } |
| return 0; |
| } |
| |
| static int pid_is_name(pid_t pid) |
| { |
| /* /proc/PID/stat is "PID (comm_15_bytes_max) ..." */ |
| char buf[32]; /* should be enough */ |
| char *p, *pe; |
| |
| sprintf(buf, "/proc/%u/stat", (unsigned)pid); |
| if (open_read_close(buf, buf, sizeof(buf) - 1) < 0) |
| return 0; |
| buf[sizeof(buf) - 1] = '\0'; /* paranoia */ |
| p = strchr(buf, '('); |
| if (!p) |
| return 0; |
| pe = strrchr(++p, ')'); |
| if (!pe) |
| return 0; |
| *pe = '\0'; |
| /* we require comm to match and to not be truncated */ |
| /* in Linux, if comm is 15 chars, it may be a truncated |
| * name, so we don't allow that to match */ |
| if (strlen(p) >= COMM_LEN - 1) /* COMM_LEN is 16 */ |
| return 0; |
| return strcmp(p, cmdname) == 0; |
| } |
| |
| static int pid_is_user(int pid) |
| { |
| struct stat sb; |
| char buf[sizeof("/proc/") + sizeof(int)*3]; |
| |
| sprintf(buf, "/proc/%u", (unsigned)pid); |
| if (stat(buf, &sb) != 0) |
| return 0; |
| return (sb.st_uid == (uid_t)user_id); |
| } |
| |
| static void check(int pid) |
| { |
| struct pid_list *p; |
| |
| if (execname && !pid_is_exec(pid)) { |
| return; |
| } |
| if (cmdname && !pid_is_name(pid)) { |
| return; |
| } |
| if (userspec && !pid_is_user(pid)) { |
| return; |
| } |
| p = xmalloc(sizeof(*p)); |
| p->next = G.found_procs; |
| p->pid = pid; |
| G.found_procs = p; |
| } |
| |
| static void do_pidfile(void) |
| { |
| FILE *f; |
| unsigned pid; |
| |
| f = fopen_for_read(pidfile); |
| if (f) { |
| if (fscanf(f, "%u", &pid) == 1) |
| check(pid); |
| fclose(f); |
| } else if (errno != ENOENT) |
| bb_perror_msg_and_die("open pidfile %s", pidfile); |
| } |
| |
| static void do_procinit(void) |
| { |
| DIR *procdir; |
| struct dirent *entry; |
| int pid; |
| |
| if (pidfile) { |
| do_pidfile(); |
| return; |
| } |
| |
| procdir = xopendir("/proc"); |
| |
| pid = 0; |
| while (1) { |
| errno = 0; /* clear any previous error */ |
| entry = readdir(procdir); |
| // TODO: this check is too generic, it's better |
| // to check for exact errno(s) which mean that we got stale entry |
| if (errno) /* Stale entry, process has died after opendir */ |
| continue; |
| if (!entry) /* EOF, no more entries */ |
| break; |
| pid = bb_strtou(entry->d_name, NULL, 10); |
| if (errno) /* NaN */ |
| continue; |
| check(pid); |
| } |
| closedir(procdir); |
| if (!pid) |
| bb_error_msg_and_die("nothing in /proc - not mounted?"); |
| } |
| |
| static int do_stop(void) |
| { |
| char *what; |
| struct pid_list *p; |
| int killed = 0; |
| |
| if (cmdname) { |
| if (ENABLE_FEATURE_CLEAN_UP) what = xstrdup(cmdname); |
| if (!ENABLE_FEATURE_CLEAN_UP) what = cmdname; |
| } else if (execname) { |
| if (ENABLE_FEATURE_CLEAN_UP) what = xstrdup(execname); |
| if (!ENABLE_FEATURE_CLEAN_UP) what = execname; |
| } else if (pidfile) { |
| what = xasprintf("process in pidfile '%s'", pidfile); |
| } else if (userspec) { |
| what = xasprintf("process(es) owned by '%s'", userspec); |
| } else { |
| bb_error_msg_and_die("internal error, please report"); |
| } |
| |
| if (!G.found_procs) { |
| if (!QUIET) |
| printf("no %s found; none killed\n", what); |
| killed = -1; |
| goto ret; |
| } |
| for (p = G.found_procs; p; p = p->next) { |
| if (kill(p->pid, TEST ? 0 : signal_nr) == 0) { |
| killed++; |
| } else { |
| bb_perror_msg("warning: killing process %u", (unsigned)p->pid); |
| p->pid = 0; |
| if (TEST) { |
| /* Example: -K --test --pidfile PIDFILE detected |
| * that PIDFILE's pid doesn't exist */ |
| killed = -1; |
| goto ret; |
| } |
| } |
| } |
| if (!QUIET && killed) { |
| printf("stopped %s (pid", what); |
| for (p = G.found_procs; p; p = p->next) |
| if (p->pid) |
| printf(" %u", (unsigned)p->pid); |
| puts(")"); |
| } |
| ret: |
| if (ENABLE_FEATURE_CLEAN_UP) |
| free(what); |
| return killed; |
| } |
| |
| #if ENABLE_FEATURE_START_STOP_DAEMON_LONG_OPTIONS |
| static const char start_stop_daemon_longopts[] ALIGN1 = |
| "stop\0" No_argument "K" |
| "start\0" No_argument "S" |
| "background\0" No_argument "b" |
| "quiet\0" No_argument "q" |
| "test\0" No_argument "t" |
| "make-pidfile\0" No_argument "m" |
| #if ENABLE_FEATURE_START_STOP_DAEMON_FANCY |
| "oknodo\0" No_argument "o" |
| "verbose\0" No_argument "v" |
| "nicelevel\0" Required_argument "N" |
| #endif |
| "startas\0" Required_argument "a" |
| "name\0" Required_argument "n" |
| "signal\0" Required_argument "s" |
| "user\0" Required_argument "u" |
| "chuid\0" Required_argument "c" |
| "exec\0" Required_argument "x" |
| "pidfile\0" Required_argument "p" |
| #if ENABLE_FEATURE_START_STOP_DAEMON_FANCY |
| "retry\0" Required_argument "R" |
| #endif |
| ; |
| #endif |
| |
| int start_stop_daemon_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int start_stop_daemon_main(int argc UNUSED_PARAM, char **argv) |
| { |
| unsigned opt; |
| char *signame; |
| char *startas; |
| char *chuid; |
| #ifdef OLDER_VERSION_OF_X |
| struct stat execstat; |
| #endif |
| #if ENABLE_FEATURE_START_STOP_DAEMON_FANCY |
| // char *retry_arg = NULL; |
| // int retries = -1; |
| char *opt_N; |
| #endif |
| |
| INIT_G(); |
| |
| #if ENABLE_FEATURE_START_STOP_DAEMON_LONG_OPTIONS |
| applet_long_options = start_stop_daemon_longopts; |
| #endif |
| |
| /* -K or -S is required; they are mutually exclusive */ |
| /* -p is required if -m is given */ |
| /* -xpun (at least one) is required if -K is given */ |
| /* -xa (at least one) is required if -S is given */ |
| /* -q turns off -v */ |
| opt_complementary = "K:S:K--S:S--K:m?p:K?xpun:S?xa" |
| IF_FEATURE_START_STOP_DAEMON_FANCY("q-v"); |
| opt = getopt32(argv, "KSbqtma:n:s:u:c:x:p:" |
| IF_FEATURE_START_STOP_DAEMON_FANCY("ovN:R:"), |
| &startas, &cmdname, &signame, &userspec, &chuid, &execname, &pidfile |
| IF_FEATURE_START_STOP_DAEMON_FANCY(,&opt_N) |
| /* We accept and ignore -R <param> / --retry <param> */ |
| IF_FEATURE_START_STOP_DAEMON_FANCY(,NULL) |
| ); |
| |
| if (opt & OPT_s) { |
| signal_nr = get_signum(signame); |
| if (signal_nr < 0) bb_show_usage(); |
| } |
| |
| if (!(opt & OPT_a)) |
| startas = execname; |
| if (!execname) /* in case -a is given and -x is not */ |
| execname = startas; |
| if (execname) { |
| G.execname_sizeof = strlen(execname) + 1; |
| G.execname_cmpbuf = xmalloc(G.execname_sizeof + 1); |
| } |
| |
| // IF_FEATURE_START_STOP_DAEMON_FANCY( |
| // if (retry_arg) |
| // retries = xatoi_positive(retry_arg); |
| // ) |
| //argc -= optind; |
| argv += optind; |
| |
| if (userspec) { |
| user_id = bb_strtou(userspec, NULL, 10); |
| if (errno) |
| user_id = xuname2uid(userspec); |
| } |
| /* Both start and stop need to know current processes */ |
| do_procinit(); |
| |
| if (opt & CTX_STOP) { |
| int i = do_stop(); |
| return (opt & OPT_OKNODO) ? 0 : (i <= 0); |
| } |
| |
| if (G.found_procs) { |
| if (!QUIET) |
| printf("%s is already running\n%u\n", execname, (unsigned)G.found_procs->pid); |
| return !(opt & OPT_OKNODO); |
| } |
| |
| #ifdef OLDER_VERSION_OF_X |
| if (execname) |
| xstat(execname, &execstat); |
| #endif |
| |
| *--argv = startas; |
| if (opt & OPT_BACKGROUND) { |
| #if BB_MMU |
| bb_daemonize(DAEMON_DEVNULL_STDIO + DAEMON_CLOSE_EXTRA_FDS + DAEMON_DOUBLE_FORK); |
| /* DAEMON_DEVNULL_STDIO is superfluous - |
| * it's always done by bb_daemonize() */ |
| #else |
| pid_t pid = xvfork(); |
| if (pid != 0) { |
| /* parent */ |
| /* why _exit? the child may have changed the stack, |
| * so "return 0" may do bad things */ |
| _exit(EXIT_SUCCESS); |
| } |
| /* Child */ |
| setsid(); /* detach from controlling tty */ |
| /* Redirect stdio to /dev/null, close extra FDs. |
| * We do not actually daemonize because of DAEMON_ONLY_SANITIZE */ |
| bb_daemonize_or_rexec(DAEMON_DEVNULL_STDIO |
| + DAEMON_CLOSE_EXTRA_FDS |
| + DAEMON_ONLY_SANITIZE, |
| NULL /* argv, unused */ ); |
| #endif |
| } |
| if (opt & OPT_MAKEPID) { |
| /* User wants _us_ to make the pidfile */ |
| write_pidfile(pidfile); |
| } |
| if (opt & OPT_c) { |
| struct bb_uidgid_t ugid; |
| parse_chown_usergroup_or_die(&ugid, chuid); |
| if (ugid.uid != (uid_t) -1L) { |
| struct passwd *pw = xgetpwuid(ugid.uid); |
| if (ugid.gid != (gid_t) -1L) |
| pw->pw_gid = ugid.gid; |
| /* initgroups, setgid, setuid: */ |
| change_identity(pw); |
| } else if (ugid.gid != (gid_t) -1L) { |
| xsetgid(ugid.gid); |
| setgroups(1, &ugid.gid); |
| } |
| } |
| #if ENABLE_FEATURE_START_STOP_DAEMON_FANCY |
| if (opt & OPT_NICELEVEL) { |
| /* Set process priority */ |
| int prio = getpriority(PRIO_PROCESS, 0) + xatoi_range(opt_N, INT_MIN/2, INT_MAX/2); |
| if (setpriority(PRIO_PROCESS, 0, prio) < 0) { |
| bb_perror_msg_and_die("setpriority(%d)", prio); |
| } |
| } |
| #endif |
| execvp(startas, argv); |
| bb_perror_msg_and_die("can't execute '%s'", startas); |
| } |