sysklogd/klogd.c - codeaurora/busybox - Gitiles

 /* vi: set sw=4 ts=4: */
 /*
  * Mini klogd implementation for busybox
  *
  * Copyright (C) 2001 by Gennady Feldman <gfeldman@gena01.com>.
  * Changes: Made this a standalone busybox module which uses standalone
  * syslog() client interface.
  *
  * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
  *
  * Copyright (C) 2000 by Karl M. Hegbloom <karlheg@debian.org>
  *
  * "circular buffer" Copyright (C) 2000 by Gennady Feldman <gfeldman@gena01.com>
  *
  * Maintainer: Gennady Feldman <gfeldman@gena01.com> as of Mar 12, 2001
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */

 #include "libbb.h"
 #include <syslog.h>


 /* The Linux-specific klogctl(3) interface does not rely on the filesystem and
  * allows us to change the console loglevel. Alternatively, we read the
  * messages from _PATH_KLOG. */

 #if ENABLE_FEATURE_KLOGD_KLOGCTL

 # include <sys/klog.h>

 static void klogd_open(void)
 {
 	/* "Open the log. Currently a NOP" */
 	klogctl(1, NULL, 0);
 }

 static void klogd_setloglevel(int lvl)
 {
 	/* "printk() prints a message on the console only if it has a loglevel
 	 * less than console_loglevel". Here we set console_loglevel = lvl. */
 	klogctl(8, NULL, lvl);
 }

 static int klogd_read(char *bufp, int len)
 {
 	return klogctl(2, bufp, len);
 }
 # define READ_ERROR "klogctl(2) error"

 static void klogd_close(void)
 {
 	/* FYI: cmd 7 is equivalent to setting console_loglevel to 7
 	 * via klogctl(8, NULL, 7). */
 	klogctl(7, NULL, 0); /* "7 -- Enable printk's to console" */
 	klogctl(0, NULL, 0); /* "0 -- Close the log. Currently a NOP" */
 }

 #else

 # include <paths.h>
 # ifndef _PATH_KLOG
 #  ifdef __GNU__
 #   define _PATH_KLOG "/dev/klog"
 #  else
 #   error "your system's _PATH_KLOG is unknown"
 #  endif
 # endif
 # define PATH_PRINTK "/proc/sys/kernel/printk"

 enum { klogfd = 3 };

 static void klogd_open(void)
 {
 	int fd = xopen(_PATH_KLOG, O_RDONLY);
 	xmove_fd(fd, klogfd);
 }

 static void klogd_setloglevel(int lvl)
 {
 	FILE *fp = fopen_or_warn(PATH_PRINTK, "w");
 	if (fp) {
 		/* This changes only first value:
 		 * "messages with a higher priority than this
 		 * [that is, with numerically lower value]
 		 * will be printed to the console".
 		 * The other three values in this pseudo-file aren't changed.
 		 */
 		fprintf(fp, "%u\n", lvl);
 		fclose(fp);
 	}
 }

 static int klogd_read(char *bufp, int len)
 {
 	return read(klogfd, bufp, len);
 }
 # define READ_ERROR "read error"

 static void klogd_close(void)
 {
 	klogd_setloglevel(7);
 	if (ENABLE_FEATURE_CLEAN_UP)
 		close(klogfd);
 }

 #endif

 #define log_buffer bb_common_bufsiz1
 enum {
 	KLOGD_LOGBUF_SIZE = sizeof(log_buffer),
 	OPT_LEVEL      = (1 << 0),
 	OPT_FOREGROUND = (1 << 1),
 };

 /* TODO: glibc openlog(LOG_KERN) reverts to LOG_USER instead,
  * because that's how they interpret word "default"
  * in the openlog() manpage:
  *      LOG_USER (default)
  *              generic user-level messages
  * and the fact that LOG_KERN is a constant 0.
  * glibc interprets it as "0 in openlog() call means 'use default'".
  * I think it means "if openlog wasn't called before syslog() is called,
  * use default".
  * Convincing glibc maintainers otherwise is, as usual, nearly impossible.
  * Should we open-code syslog() here to use correct facility?
  */

 int klogd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 int klogd_main(int argc UNUSED_PARAM, char **argv)
 {
 	int i = 0;
 	char *opt_c;
 	int opt;
 	int used;

 	opt = getopt32(argv, "c:n", &opt_c);
 	if (opt & OPT_LEVEL) {
 		/* Valid levels are between 1 and 8 */
 		i = xatou_range(opt_c, 1, 8);
 	}
 	if (!(opt & OPT_FOREGROUND)) {
 		bb_daemonize_or_rexec(DAEMON_CHDIR_ROOT, argv);
 	}

 	logmode = LOGMODE_SYSLOG;

 	/* klogd_open() before openlog(), since it might use fixed fd 3,
 	 * and openlog() also may use the same fd 3 if we swap them:
 	 */
 	klogd_open();
 	openlog("kernel", 0, LOG_KERN);
 	/*
 	 * glibc problem: for some reason, glibc changes LOG_KERN to LOG_USER
 	 * above. The logic behind this is that standard
 	 * http://pubs.opengroup.org/onlinepubs/9699919799/functions/syslog.html
 	 * says the following about openlog and syslog:
 	 * "LOG_USER
 	 *  Messages generated by arbitrary processes.
 	 *  This is the default facility identifier if none is specified."
 	 *
 	 * I believe glibc misinterpreted this text as "if openlog's
 	 * third parameter is 0 (=LOG_KERN), treat it as LOG_USER".
 	 * Whereas it was meant to say "if *syslog* is called with facility
 	 * 0 in its 1st parameter without prior call to openlog, then perform
 	 * implicit openlog(LOG_USER)".
 	 *
 	 * As a result of this, eh, feature, standard klogd was forced
 	 * to open-code its own openlog and syslog implementation (!).
 	 *
 	 * Note that prohibiting openlog(LOG_KERN) on libc level does not
 	 * add any security: any process can open a socket to "/dev/log"
 	 * and write a string "<0>Voila, a LOG_KERN + LOG_EMERG message"
 	 *
 	 * Google code search tells me there is no widespread use of
 	 * openlog("foo", 0, 0), thus fixing glibc won't break userspace.
 	 *
 	 * The bug against glibc was filed:
 	 * bugzilla.redhat.com/show_bug.cgi?id=547000
 	 */

 	if (i)
 		klogd_setloglevel(i);

 	signal(SIGHUP, SIG_IGN);
 	/* We want klogd_read to not be restarted, thus _norestart: */
 	bb_signals_recursive_norestart(BB_FATAL_SIGS, record_signo);

 	syslog(LOG_NOTICE, "klogd started: %s", bb_banner);

 	used = 0;
 	while (!bb_got_signal) {
 		int n;
 		int priority;
 		char *start;

 		/* "2 -- Read from the log." */
 		start = log_buffer + used;
 		n = klogd_read(start, KLOGD_LOGBUF_SIZE-1 - used);
 		if (n < 0) {
 			if (errno == EINTR)
 				continue;
 			bb_perror_msg(READ_ERROR);
 			break;
 		}
 		start[n] = '\0';

 		/* Process each newline-terminated line in the buffer */
 		start = log_buffer;
 		while (1) {
 			char *newline = strchrnul(start, '\n');

 			if (*newline == '\0') {
 				/* This line is incomplete */

 				/* move it to the front of the buffer */
 				overlapping_strcpy(log_buffer, start);
 				used = newline - start;
 				if (used < KLOGD_LOGBUF_SIZE-1) {
 					/* buffer isn't full */
 					break;
 				}
 				/* buffer is full, log it anyway */
 				used = 0;
 				newline = NULL;
 			} else {
 				*newline++ = '\0';
 			}

 			/* Extract the priority */
 			priority = LOG_INFO;
 			if (*start == '<') {
 				start++;
 				if (*start) {
 					/* kernel never generates multi-digit prios */
 					priority = (*start - '0');
 					start++;
 				}
 				if (*start == '>')
 					start++;
 			}
 			/* Log (only non-empty lines) */
 			if (*start)
 				syslog(priority, "%s", start);

 			if (!newline)
 				break;
 			start = newline;
 		}
 	}

 	klogd_close();
 	syslog(LOG_NOTICE, "klogd: exiting");
 	if (bb_got_signal)
 		kill_myself_with_sig(bb_got_signal);
 	return EXIT_FAILURE;
 }
	/* vi: set sw=4 ts=4: */
	/*
	* Mini klogd implementation for busybox
	*
	* Copyright (C) 2001 by Gennady Feldman <gfeldman@gena01.com>.
	* Changes: Made this a standalone busybox module which uses standalone
	* syslog() client interface.
	*
	* Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
	*
	* Copyright (C) 2000 by Karl M. Hegbloom <karlheg@debian.org>
	*
	* "circular buffer" Copyright (C) 2000 by Gennady Feldman <gfeldman@gena01.com>
	*
	* Maintainer: Gennady Feldman <gfeldman@gena01.com> as of Mar 12, 2001
	*
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*/

	#include "libbb.h"
	#include <syslog.h>


	/* The Linux-specific klogctl(3) interface does not rely on the filesystem and
	* allows us to change the console loglevel. Alternatively, we read the
	* messages from _PATH_KLOG. */

	#if ENABLE_FEATURE_KLOGD_KLOGCTL

	# include <sys/klog.h>

	static void klogd_open(void)
	{
	/* "Open the log. Currently a NOP" */
	klogctl(1, NULL, 0);
	}

	static void klogd_setloglevel(int lvl)
	{
	/* "printk() prints a message on the console only if it has a loglevel
	* less than console_loglevel". Here we set console_loglevel = lvl. */
	klogctl(8, NULL, lvl);
	}

	static int klogd_read(char *bufp, int len)
	{
	return klogctl(2, bufp, len);
	}
	# define READ_ERROR "klogctl(2) error"

	static void klogd_close(void)
	{
	/* FYI: cmd 7 is equivalent to setting console_loglevel to 7
	* via klogctl(8, NULL, 7). */
	klogctl(7, NULL, 0); /* "7 -- Enable printk's to console" */
	klogctl(0, NULL, 0); /* "0 -- Close the log. Currently a NOP" */
	}

	#else

	# include <paths.h>
	# ifndef _PATH_KLOG
	# ifdef __GNU__
	# define _PATH_KLOG "/dev/klog"
	# else
	# error "your system's _PATH_KLOG is unknown"
	# endif
	# endif
	# define PATH_PRINTK "/proc/sys/kernel/printk"

	enum { klogfd = 3 };

	static void klogd_open(void)
	{
	int fd = xopen(_PATH_KLOG, O_RDONLY);
	xmove_fd(fd, klogfd);
	}

	static void klogd_setloglevel(int lvl)
	{
	FILE *fp = fopen_or_warn(PATH_PRINTK, "w");
	if (fp) {
	/* This changes only first value:
	* "messages with a higher priority than this
	* [that is, with numerically lower value]
	* will be printed to the console".
	* The other three values in this pseudo-file aren't changed.
	*/
	fprintf(fp, "%u\n", lvl);
	fclose(fp);
	}
	}

	static int klogd_read(char *bufp, int len)
	{
	return read(klogfd, bufp, len);
	}
	# define READ_ERROR "read error"

	static void klogd_close(void)
	{
	klogd_setloglevel(7);
	if (ENABLE_FEATURE_CLEAN_UP)
	close(klogfd);
	}

	#endif

	#define log_buffer bb_common_bufsiz1
	enum {
	KLOGD_LOGBUF_SIZE = sizeof(log_buffer),
	OPT_LEVEL = (1 << 0),
	OPT_FOREGROUND = (1 << 1),
	};

	/* TODO: glibc openlog(LOG_KERN) reverts to LOG_USER instead,
	* because that's how they interpret word "default"
	* in the openlog() manpage:
	* LOG_USER (default)
	* generic user-level messages
	* and the fact that LOG_KERN is a constant 0.
	* glibc interprets it as "0 in openlog() call means 'use default'".
	* I think it means "if openlog wasn't called before syslog() is called,
	* use default".
	* Convincing glibc maintainers otherwise is, as usual, nearly impossible.
	* Should we open-code syslog() here to use correct facility?
	*/

	int klogd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
	int klogd_main(int argc UNUSED_PARAM, char **argv)
	{
	int i = 0;
	char *opt_c;
	int opt;
	int used;

	opt = getopt32(argv, "c:n", &opt_c);
	if (opt & OPT_LEVEL) {
	/* Valid levels are between 1 and 8 */
	i = xatou_range(opt_c, 1, 8);
	}
	if (!(opt & OPT_FOREGROUND)) {
	bb_daemonize_or_rexec(DAEMON_CHDIR_ROOT, argv);
	}

	logmode = LOGMODE_SYSLOG;

	/* klogd_open() before openlog(), since it might use fixed fd 3,
	* and openlog() also may use the same fd 3 if we swap them:
	*/
	klogd_open();
	openlog("kernel", 0, LOG_KERN);
	/*
	* glibc problem: for some reason, glibc changes LOG_KERN to LOG_USER
	* above. The logic behind this is that standard
	* http://pubs.opengroup.org/onlinepubs/9699919799/functions/syslog.html
	* says the following about openlog and syslog:
	* "LOG_USER
	* Messages generated by arbitrary processes.
	* This is the default facility identifier if none is specified."
	*
	* I believe glibc misinterpreted this text as "if openlog's
	* third parameter is 0 (=LOG_KERN), treat it as LOG_USER".
	* Whereas it was meant to say "if syslog is called with facility
	* 0 in its 1st parameter without prior call to openlog, then perform
	* implicit openlog(LOG_USER)".
	*
	* As a result of this, eh, feature, standard klogd was forced
	* to open-code its own openlog and syslog implementation (!).
	*
	* Note that prohibiting openlog(LOG_KERN) on libc level does not
	* add any security: any process can open a socket to "/dev/log"
	* and write a string "<0>Voila, a LOG_KERN + LOG_EMERG message"
	*
	* Google code search tells me there is no widespread use of
	* openlog("foo", 0, 0), thus fixing glibc won't break userspace.
	*
	* The bug against glibc was filed:
	* bugzilla.redhat.com/show_bug.cgi?id=547000
	*/

	if (i)
	klogd_setloglevel(i);

	signal(SIGHUP, SIG_IGN);
	/* We want klogd_read to not be restarted, thus _norestart: */
	bb_signals_recursive_norestart(BB_FATAL_SIGS, record_signo);

	syslog(LOG_NOTICE, "klogd started: %s", bb_banner);

	used = 0;
	while (!bb_got_signal) {
	int n;
	int priority;
	char *start;

	/* "2 -- Read from the log." */
	start = log_buffer + used;
	n = klogd_read(start, KLOGD_LOGBUF_SIZE-1 - used);
	if (n < 0) {
	if (errno == EINTR)
	continue;
	bb_perror_msg(READ_ERROR);
	break;
	}
	start[n] = '\0';

	/* Process each newline-terminated line in the buffer */
	start = log_buffer;
	while (1) {
	char *newline = strchrnul(start, '\n');

	if (*newline == '\0') {
	/* This line is incomplete */

	/* move it to the front of the buffer */
	overlapping_strcpy(log_buffer, start);
	used = newline - start;
	if (used < KLOGD_LOGBUF_SIZE-1) {
	/* buffer isn't full */
	break;
	}
	/* buffer is full, log it anyway */
	used = 0;
	newline = NULL;
	} else {
	*newline++ = '\0';
	}

	/* Extract the priority */
	priority = LOG_INFO;
	if (*start == '<') {
	start++;
	if (*start) {
	/* kernel never generates multi-digit prios */
	priority = (*start - '0');
	start++;
	}
	if (*start == '>')
	start++;
	}
	/* Log (only non-empty lines) */
	if (*start)
	syslog(priority, "%s", start);

	if (!newline)
	break;
	start = newline;
	}
	}

	klogd_close();
	syslog(LOG_NOTICE, "klogd: exiting");
	if (bb_got_signal)
	kill_myself_with_sig(bb_got_signal);
	return EXIT_FAILURE;
	}