| /* |
| * mke2fs.c - Make a ext2fs filesystem. |
| * |
| * Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| * 2003, 2004, 2005 by Theodore Ts'o. |
| * |
| * This file may be redistributed under the terms of the GNU Public |
| * License. |
| */ |
| |
| /* Usage: mke2fs [options] device |
| * |
| * The device may be a block device or a image of one, but this isn't |
| * enforced (but it's not much fun on a character device :-). |
| */ |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <ctype.h> |
| #include <time.h> |
| #include <getopt.h> |
| #include <unistd.h> |
| #include <stdlib.h> |
| #include <errno.h> |
| #include <mntent.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| |
| #include "e2fsbb.h" |
| #include "ext2fs/ext2_fs.h" |
| #include "uuid/uuid.h" |
| #include "e2p/e2p.h" |
| #include "ext2fs/ext2fs.h" |
| #include "util.h" |
| |
| #define STRIDE_LENGTH 8 |
| |
| #ifndef __sparc__ |
| #define ZAP_BOOTBLOCK |
| #endif |
| |
| static const char * device_name; |
| |
| /* Command line options */ |
| static int cflag; |
| static int quiet; |
| static int super_only; |
| static int force; |
| static int noaction; |
| static int journal_size; |
| static int journal_flags; |
| static const char *bad_blocks_filename; |
| static __u32 fs_stride; |
| |
| static struct ext2_super_block param; |
| static char *creator_os; |
| static char *volume_label; |
| static char *mount_dir; |
| static char *journal_device = NULL; |
| static int sync_kludge; /* Set using the MKE2FS_SYNC env. option */ |
| |
| static int sys_page_size = 4096; |
| static int linux_version_code = 0; |
| |
| static int int_log2(int arg) |
| { |
| int l = 0; |
| |
| arg >>= 1; |
| while (arg) { |
| l++; |
| arg >>= 1; |
| } |
| return l; |
| } |
| |
| static int int_log10(unsigned int arg) |
| { |
| int l; |
| |
| for (l=0; arg ; l++) |
| arg = arg / 10; |
| return l; |
| } |
| |
| /* |
| * This function sets the default parameters for a filesystem |
| * |
| * The type is specified by the user. The size is the maximum size |
| * (in megabytes) for which a set of parameters applies, with a size |
| * of zero meaning that it is the default parameter for the type. |
| * Note that order is important in the table below. |
| */ |
| #define DEF_MAX_BLOCKSIZE -1 |
| static const char default_str[] = "default"; |
| struct mke2fs_defaults { |
| const char *type; |
| int size; |
| int blocksize; |
| int inode_ratio; |
| }; |
| |
| static const struct mke2fs_defaults settings[] = { |
| { default_str, 0, 4096, 8192 }, |
| { default_str, 512, 1024, 4096 }, |
| { default_str, 3, 1024, 8192 }, |
| { "journal", 0, 4096, 8192 }, |
| { "news", 0, 4096, 4096 }, |
| { "largefile", 0, 4096, 1024 * 1024 }, |
| { "largefile4", 0, 4096, 4096 * 1024 }, |
| { 0, 0, 0, 0}, |
| }; |
| |
| static void set_fs_defaults(const char *fs_type, |
| struct ext2_super_block *super, |
| int blocksize, int sector_size, |
| int *inode_ratio) |
| { |
| int megs; |
| int ratio = 0; |
| const struct mke2fs_defaults *p; |
| int use_bsize = 1024; |
| |
| megs = super->s_blocks_count * (EXT2_BLOCK_SIZE(super) / 1024) / 1024; |
| if (inode_ratio) |
| ratio = *inode_ratio; |
| if (!fs_type) |
| fs_type = default_str; |
| for (p = settings; p->type; p++) { |
| if ((strcmp(p->type, fs_type) != 0) && |
| (strcmp(p->type, default_str) != 0)) |
| continue; |
| if ((p->size != 0) && (megs > p->size)) |
| continue; |
| if (ratio == 0) |
| *inode_ratio = p->inode_ratio < blocksize ? |
| blocksize : p->inode_ratio; |
| use_bsize = p->blocksize; |
| } |
| if (blocksize <= 0) { |
| if (use_bsize == DEF_MAX_BLOCKSIZE) { |
| use_bsize = sys_page_size; |
| if ((linux_version_code < (2*65536 + 6*256)) && |
| (use_bsize > 4096)) |
| use_bsize = 4096; |
| } |
| if (sector_size && use_bsize < sector_size) |
| use_bsize = sector_size; |
| if ((blocksize < 0) && (use_bsize < (-blocksize))) |
| use_bsize = -blocksize; |
| blocksize = use_bsize; |
| super->s_blocks_count /= blocksize / 1024; |
| } |
| super->s_log_frag_size = super->s_log_block_size = |
| int_log2(blocksize >> EXT2_MIN_BLOCK_LOG_SIZE); |
| } |
| |
| |
| /* |
| * Helper function for read_bb_file and test_disk |
| */ |
| static void invalid_block(ext2_filsys fs EXT2FS_ATTR((unused)), blk_t blk) |
| { |
| bb_error_msg("Bad block %u out of range; ignored", blk); |
| return; |
| } |
| |
| /* |
| * Busybox stuff |
| */ |
| static void mke2fs_error_msg_and_die(int retval, const char *fmt, ...)__attribute__ ((format (printf, 2, 3))); |
| static void mke2fs_error_msg_and_die(int retval, const char *fmt, ...) |
| { |
| va_list ap; |
| |
| if (retval) { |
| va_start(ap, fmt); |
| bb_fprintf(stderr,"\nCould not "); |
| bb_vfprintf(stderr, fmt, ap); |
| bb_fprintf(stderr, "\n"); |
| va_end(ap); |
| exit(EXIT_FAILURE); |
| } |
| } |
| |
| static void mke2fs_verbose(const char *fmt, ...)__attribute__ ((format (printf, 1, 2))); |
| static void mke2fs_verbose(const char *fmt, ...) |
| { |
| va_list ap; |
| |
| if (!quiet) { |
| va_start(ap, fmt); |
| bb_vfprintf(stdout, fmt, ap); |
| fflush(stdout); |
| va_end(ap); |
| } |
| } |
| |
| static void mke2fs_verbose_done(void) |
| { |
| mke2fs_verbose("done\n"); |
| } |
| |
| static void mke2fs_warning_msg(int retval, char *fmt, ... )__attribute__ ((format (printf, 2, 3))); |
| static void mke2fs_warning_msg(int retval, char *fmt, ... ) |
| { |
| va_list ap; |
| |
| if (retval) { |
| va_start(ap, fmt); |
| bb_fprintf(stderr,"\nWarning: "); |
| bb_vfprintf(stderr, fmt, ap); |
| bb_fprintf(stderr, "\n"); |
| va_end(ap); |
| } |
| } |
| |
| /* |
| * Reads the bad blocks list from a file |
| */ |
| static void read_bb_file(ext2_filsys fs, badblocks_list *bb_list, |
| const char *bad_blocks_file) |
| { |
| FILE *f; |
| errcode_t retval; |
| |
| f = bb_xfopen(bad_blocks_file, "r"); |
| retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block); |
| fclose (f); |
| mke2fs_error_msg_and_die(retval, "read bad blocks from list"); |
| } |
| |
| /* |
| * Runs the badblocks program to test the disk |
| */ |
| static void test_disk(ext2_filsys fs, badblocks_list *bb_list) |
| { |
| FILE *f; |
| errcode_t retval; |
| char buf[1024]; |
| |
| sprintf(buf, "badblocks -b %d %s%s%s %d", fs->blocksize, |
| quiet ? "" : "-s ", (cflag > 1) ? "-w " : "", |
| fs->device_name, fs->super->s_blocks_count); |
| mke2fs_verbose("Running command: %s\n", buf); |
| f = popen(buf, "r"); |
| if (!f) { |
| bb_perror_msg_and_die("Could not run '%s'", buf); |
| } |
| retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block); |
| pclose(f); |
| mke2fs_error_msg_and_die(retval, "read bad blocks from program"); |
| } |
| |
| static void handle_bad_blocks(ext2_filsys fs, badblocks_list bb_list) |
| { |
| dgrp_t i; |
| blk_t j; |
| unsigned must_be_good; |
| blk_t blk; |
| badblocks_iterate bb_iter; |
| errcode_t retval; |
| blk_t group_block; |
| int group; |
| int group_bad; |
| |
| if (!bb_list) |
| return; |
| |
| /* |
| * The primary superblock and group descriptors *must* be |
| * good; if not, abort. |
| */ |
| must_be_good = fs->super->s_first_data_block + 1 + fs->desc_blocks; |
| for (i = fs->super->s_first_data_block; i <= must_be_good; i++) { |
| if (ext2fs_badblocks_list_test(bb_list, i)) { |
| bb_error_msg_and_die( |
| "Block %d in primary superblock/group descriptor area bad\n" |
| "Blocks %d through %d must be good in order to build a filesystem\n" |
| "Aborting ...", i, fs->super->s_first_data_block, must_be_good); |
| } |
| } |
| |
| /* |
| * See if any of the bad blocks are showing up in the backup |
| * superblocks and/or group descriptors. If so, issue a |
| * warning and adjust the block counts appropriately. |
| */ |
| group_block = fs->super->s_first_data_block + |
| fs->super->s_blocks_per_group; |
| |
| for (i = 1; i < fs->group_desc_count; i++) { |
| group_bad = 0; |
| for (j=0; j < fs->desc_blocks+1; j++) { |
| if (ext2fs_badblocks_list_test(bb_list, |
| group_block + j)) { |
| mke2fs_warning_msg(!group_bad, |
| "the backup superblock/group descriptors at block %d contain\n" |
| "bad blocks\n", group_block); |
| group_bad++; |
| group = ext2fs_group_of_blk(fs, group_block+j); |
| fs->group_desc[group].bg_free_blocks_count++; |
| fs->super->s_free_blocks_count++; |
| } |
| } |
| group_block += fs->super->s_blocks_per_group; |
| } |
| |
| /* |
| * Mark all the bad blocks as used... |
| */ |
| retval = ext2fs_badblocks_list_iterate_begin(bb_list, &bb_iter); |
| mke2fs_error_msg_and_die(retval, "mark bad blocks as used"); |
| |
| while (ext2fs_badblocks_list_iterate(bb_iter, &blk)) |
| ext2fs_mark_block_bitmap(fs->block_map, blk); |
| ext2fs_badblocks_list_iterate_end(bb_iter); |
| } |
| |
| /* |
| * These functions implement a generalized progress meter. |
| */ |
| struct progress_struct { |
| char format[20]; |
| char backup[80]; |
| __u32 max; |
| int skip_progress; |
| }; |
| |
| static void progress_init(struct progress_struct *progress, |
| const char *label,__u32 max) |
| { |
| int i; |
| |
| memset(progress, 0, sizeof(struct progress_struct)); |
| if (quiet) |
| return; |
| |
| /* |
| * Figure out how many digits we need |
| */ |
| i = int_log10(max); |
| sprintf(progress->format, "%%%dd/%%%dld", i, i); |
| memset(progress->backup, '\b', sizeof(progress->backup)-1); |
| progress->backup[sizeof(progress->backup)-1] = 0; |
| if ((2*i)+1 < (int) sizeof(progress->backup)) |
| progress->backup[(2*i)+1] = 0; |
| progress->max = max; |
| |
| progress->skip_progress = 0; |
| if (getenv("MKE2FS_SKIP_PROGRESS")) |
| progress->skip_progress++; |
| |
| fputs(label, stdout); |
| fflush(stdout); |
| } |
| |
| static void progress_update(struct progress_struct *progress, __u32 val) |
| { |
| if ((progress->format[0] == 0) || progress->skip_progress) |
| return; |
| printf(progress->format, val, progress->max); |
| fputs(progress->backup, stdout); |
| } |
| |
| static void progress_close(struct progress_struct *progress) |
| { |
| if (progress->format[0] == 0) |
| return; |
| printf("%-28s\n", "done"); |
| } |
| |
| |
| /* |
| * Helper function which zeros out _num_ blocks starting at _blk_. In |
| * case of an error, the details of the error is returned via _ret_blk_ |
| * and _ret_count_ if they are non-NULL pointers. Returns 0 on |
| * success, and an error code on an error. |
| * |
| * As a special case, if the first argument is NULL, then it will |
| * attempt to free the static zeroizing buffer. (This is to keep |
| * programs that check for memory leaks happy.) |
| */ |
| static errcode_t zero_blocks(ext2_filsys fs, blk_t blk, int num, |
| struct progress_struct *progress, |
| blk_t *ret_blk, int *ret_count) |
| { |
| int j, count, next_update, next_update_incr; |
| static char *buf; |
| errcode_t retval; |
| |
| /* If fs is null, clean up the static buffer and return */ |
| if (!fs) { |
| if (buf) { |
| free(buf); |
| buf = 0; |
| } |
| return 0; |
| } |
| /* Allocate the zeroizing buffer if necessary */ |
| if (!buf) { |
| buf = xcalloc(fs->blocksize, STRIDE_LENGTH); |
| } |
| /* OK, do the write loop */ |
| next_update = 0; |
| next_update_incr = num / 100; |
| if (next_update_incr < 1) |
| next_update_incr = 1; |
| for (j=0; j < num; j += STRIDE_LENGTH, blk += STRIDE_LENGTH) { |
| count = num - j; |
| if (count > STRIDE_LENGTH) |
| count = STRIDE_LENGTH; |
| retval = io_channel_write_blk(fs->io, blk, count, buf); |
| if (retval) { |
| if (ret_count) |
| *ret_count = count; |
| if (ret_blk) |
| *ret_blk = blk; |
| return retval; |
| } |
| if (progress && j > next_update) { |
| next_update += num / 100; |
| progress_update(progress, blk); |
| } |
| } |
| return 0; |
| } |
| |
| static void write_inode_tables(ext2_filsys fs) |
| { |
| errcode_t retval; |
| blk_t blk; |
| dgrp_t i; |
| int num; |
| struct progress_struct progress; |
| |
| if (quiet) |
| memset(&progress, 0, sizeof(progress)); |
| else |
| progress_init(&progress, "Writing inode tables: ", |
| fs->group_desc_count); |
| |
| for (i = 0; i < fs->group_desc_count; i++) { |
| progress_update(&progress, i); |
| |
| blk = fs->group_desc[i].bg_inode_table; |
| num = fs->inode_blocks_per_group; |
| |
| retval = zero_blocks(fs, blk, num, 0, &blk, &num); |
| mke2fs_error_msg_and_die(retval, |
| "write %d blocks in inode table starting at %d.", |
| num, blk); |
| if (sync_kludge) { |
| if (sync_kludge == 1) |
| sync(); |
| else if ((i % sync_kludge) == 0) |
| sync(); |
| } |
| } |
| zero_blocks(0, 0, 0, 0, 0, 0); |
| progress_close(&progress); |
| } |
| |
| static void create_root_dir(ext2_filsys fs) |
| { |
| errcode_t retval; |
| struct ext2_inode inode; |
| |
| retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, EXT2_ROOT_INO, 0); |
| mke2fs_error_msg_and_die(retval, "create root dir"); |
| if (geteuid()) { |
| retval = ext2fs_read_inode(fs, EXT2_ROOT_INO, &inode); |
| mke2fs_error_msg_and_die(retval, "read root inode"); |
| inode.i_uid = getuid(); |
| if (inode.i_uid) |
| inode.i_gid = getgid(); |
| retval = ext2fs_write_new_inode(fs, EXT2_ROOT_INO, &inode); |
| mke2fs_error_msg_and_die(retval, "set root inode ownership"); |
| } |
| } |
| |
| static void create_lost_and_found(ext2_filsys fs) |
| { |
| errcode_t retval; |
| ext2_ino_t ino; |
| const char *name = "lost+found"; |
| int i = 1; |
| char *msg = "create"; |
| int lpf_size = 0; |
| |
| fs->umask = 077; |
| retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, 0, name); |
| if (retval) { |
| goto CREATE_LOST_AND_FOUND_ERROR; |
| } |
| |
| retval = ext2fs_lookup(fs, EXT2_ROOT_INO, name, strlen(name), 0, &ino); |
| if (retval) { |
| msg = "lookup"; |
| goto CREATE_LOST_AND_FOUND_ERROR; |
| } |
| |
| for (; i < EXT2_NDIR_BLOCKS; i++) { |
| if ((lpf_size += fs->blocksize) >= 16*1024) |
| break; |
| retval = ext2fs_expand_dir(fs, ino); |
| msg = "expand"; |
| CREATE_LOST_AND_FOUND_ERROR: |
| mke2fs_error_msg_and_die(retval, "%s %s", msg, name); |
| } |
| } |
| |
| static void create_bad_block_inode(ext2_filsys fs, badblocks_list bb_list) |
| { |
| errcode_t retval; |
| |
| ext2fs_mark_inode_bitmap(fs->inode_map, EXT2_BAD_INO); |
| fs->group_desc[0].bg_free_inodes_count--; |
| fs->super->s_free_inodes_count--; |
| retval = ext2fs_update_bb_inode(fs, bb_list); |
| mke2fs_error_msg_and_die(retval, "set bad block inode"); |
| } |
| |
| static void reserve_inodes(ext2_filsys fs) |
| { |
| ext2_ino_t i; |
| int group; |
| |
| for (i = EXT2_ROOT_INO + 1; i < EXT2_FIRST_INODE(fs->super); i++) { |
| ext2fs_mark_inode_bitmap(fs->inode_map, i); |
| group = ext2fs_group_of_ino(fs, i); |
| fs->group_desc[group].bg_free_inodes_count--; |
| fs->super->s_free_inodes_count--; |
| } |
| ext2fs_mark_ib_dirty(fs); |
| } |
| |
| #define BSD_DISKMAGIC (0x82564557UL) /* The disk magic number */ |
| #define BSD_MAGICDISK (0x57455682UL) /* The disk magic number reversed */ |
| #define BSD_LABEL_OFFSET 64 |
| |
| static void zap_sector(ext2_filsys fs, int sect, int nsect) |
| { |
| char *buf; |
| char *fmt = "could not %s %d"; |
| int retval; |
| unsigned int *magic; |
| |
| buf = xmalloc(512*nsect); |
| |
| if (sect == 0) { |
| /* Check for a BSD disklabel, and don't erase it if so */ |
| retval = io_channel_read_blk(fs->io, 0, -512, buf); |
| if (retval) |
| mke2fs_warning_msg(retval, fmt, "read block", 0); |
| else { |
| magic = (unsigned int *) (buf + BSD_LABEL_OFFSET); |
| if ((*magic == BSD_DISKMAGIC) || |
| (*magic == BSD_MAGICDISK)) |
| return; |
| } |
| } |
| |
| memset(buf, 0, 512*nsect); |
| io_channel_set_blksize(fs->io, 512); |
| retval = io_channel_write_blk(fs->io, sect, -512*nsect, buf); |
| io_channel_set_blksize(fs->io, fs->blocksize); |
| free(buf); |
| mke2fs_warning_msg(retval, fmt, "erase sector", sect); |
| } |
| |
| static void create_journal_dev(ext2_filsys fs) |
| { |
| struct progress_struct progress; |
| errcode_t retval; |
| char *buf; |
| char *fmt = "%s journal superblock"; |
| blk_t blk; |
| int count; |
| |
| retval = ext2fs_create_journal_superblock(fs, |
| fs->super->s_blocks_count, 0, &buf); |
| mke2fs_error_msg_and_die(retval, fmt, "init"); |
| if (quiet) |
| memset(&progress, 0, sizeof(progress)); |
| else |
| progress_init(&progress, "Zeroing journal device: ", |
| fs->super->s_blocks_count); |
| |
| retval = zero_blocks(fs, 0, fs->super->s_blocks_count, |
| &progress, &blk, &count); |
| mke2fs_error_msg_and_die(retval, "zero journal device (block %u, count %d)", |
| blk, count); |
| zero_blocks(0, 0, 0, 0, 0, 0); |
| |
| retval = io_channel_write_blk(fs->io, |
| fs->super->s_first_data_block+1, |
| 1, buf); |
| mke2fs_error_msg_and_die(retval, fmt, "write"); |
| progress_close(&progress); |
| } |
| |
| static void show_stats(ext2_filsys fs) |
| { |
| struct ext2_super_block *s = fs->super; |
| char *os; |
| blk_t group_block; |
| dgrp_t i; |
| int need, col_left; |
| |
| mke2fs_warning_msg((param.s_blocks_count != s->s_blocks_count), |
| "%d blocks unused\n", param.s_blocks_count - s->s_blocks_count); |
| os = e2p_os2string(fs->super->s_creator_os); |
| printf( "Filesystem label=%.*s\n" |
| "OS type: %s\n" |
| "Block size=%u (log=%u)\n" |
| "Fragment size=%u (log=%u)\n" |
| "%u inodes, %u blocks\n" |
| "%u blocks (%2.2f%%) reserved for the super user\n" |
| "First data block=%u\n", |
| (int) sizeof(s->s_volume_name), |
| s->s_volume_name, |
| os, |
| fs->blocksize, s->s_log_block_size, |
| fs->fragsize, s->s_log_frag_size, |
| s->s_inodes_count, s->s_blocks_count, |
| s->s_r_blocks_count, 100.0 * s->s_r_blocks_count / s->s_blocks_count, |
| s->s_first_data_block); |
| free(os); |
| if (s->s_reserved_gdt_blocks) { |
| printf("Maximum filesystem blocks=%lu\n", |
| (s->s_reserved_gdt_blocks + fs->desc_blocks) * |
| (fs->blocksize / sizeof(struct ext2_group_desc)) * |
| s->s_blocks_per_group); |
| } |
| printf( "%u block group%s\n" |
| "%u blocks per group, %u fragments per group\n" |
| "%u inodes per group\n", |
| fs->group_desc_count, (fs->group_desc_count > 1) ? "s" : "", |
| s->s_blocks_per_group, s->s_frags_per_group, |
| s->s_inodes_per_group); |
| if (fs->group_desc_count == 1) { |
| puts(""); |
| return; |
| } |
| |
| printf("Superblock backups stored on blocks: "); |
| group_block = s->s_first_data_block; |
| col_left = 0; |
| for (i = 1; i < fs->group_desc_count; i++) { |
| group_block += s->s_blocks_per_group; |
| if (!ext2fs_bg_has_super(fs, i)) |
| continue; |
| if (i != 1) |
| printf(", "); |
| need = int_log10(group_block) + 2; |
| if (need > col_left) { |
| printf("\n\t"); |
| col_left = 72; |
| } |
| col_left -= need; |
| printf("%u", group_block); |
| } |
| puts("\n"); |
| } |
| |
| /* |
| * Set the S_CREATOR_OS field. Return true if OS is known, |
| * otherwise, 0. |
| */ |
| static int set_os(struct ext2_super_block *sb, char *os) |
| { |
| if (isdigit (*os)) { |
| sb->s_creator_os = atoi (os); |
| return 1; |
| } |
| |
| if((sb->s_creator_os = e2p_string2os(os)) >= 0) { |
| return 1; |
| } else if (!strcasecmp("GNU", os)) { |
| sb->s_creator_os = EXT2_OS_HURD; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void parse_extended_opts(struct ext2_super_block *sb_param, |
| const char *opts) |
| { |
| char *buf, *token, *next, *p, *arg; |
| int r_usage = 0; |
| |
| buf = bb_xstrdup(opts); |
| for (token = buf; token && *token; token = next) { |
| p = strchr(token, ','); |
| next = 0; |
| if (p) { |
| *p = 0; |
| next = p+1; |
| } |
| arg = strchr(token, '='); |
| if (arg) { |
| *arg = 0; |
| arg++; |
| } |
| if (strcmp(token, "stride") == 0) { |
| if (!arg) { |
| r_usage++; |
| continue; |
| } |
| fs_stride = strtoul(arg, &p, 0); |
| if (*p || (fs_stride == 0)) { |
| bb_error_msg("Invalid stride parameter"); |
| r_usage++; |
| continue; |
| } |
| } else if (!strcmp(token, "resize")) { |
| unsigned long resize, bpg, rsv_groups; |
| unsigned long group_desc_count, desc_blocks; |
| unsigned int gdpb, blocksize; |
| int rsv_gdb; |
| |
| if (!arg) { |
| r_usage++; |
| continue; |
| } |
| |
| resize = parse_num_blocks(arg, |
| sb_param->s_log_block_size); |
| |
| if (resize == 0) { |
| bb_error_msg("Invalid resize parameter: %s", arg); |
| r_usage++; |
| continue; |
| } |
| if (resize <= sb_param->s_blocks_count) { |
| bb_error_msg("The resize maximum must be greater than the filesystem size"); |
| r_usage++; |
| continue; |
| } |
| |
| blocksize = EXT2_BLOCK_SIZE(sb_param); |
| bpg = sb_param->s_blocks_per_group; |
| if (!bpg) |
| bpg = blocksize * 8; |
| gdpb = blocksize / sizeof(struct ext2_group_desc); |
| group_desc_count = (sb_param->s_blocks_count + |
| bpg - 1) / bpg; |
| desc_blocks = (group_desc_count + |
| gdpb - 1) / gdpb; |
| rsv_groups = (resize + bpg - 1) / bpg; |
| rsv_gdb = (rsv_groups + gdpb - 1) / gdpb - |
| desc_blocks; |
| if (rsv_gdb > EXT2_ADDR_PER_BLOCK(sb_param)) |
| rsv_gdb = EXT2_ADDR_PER_BLOCK(sb_param); |
| |
| if (rsv_gdb > 0) { |
| sb_param->s_feature_compat |= |
| EXT2_FEATURE_COMPAT_RESIZE_INODE; |
| |
| sb_param->s_reserved_gdt_blocks = rsv_gdb; |
| } |
| } else |
| r_usage++; |
| } |
| if (r_usage) { |
| bb_error_msg_and_die( |
| "\nBad options specified.\n\n" |
| "Options are separated by commas, " |
| "and may take an argument which\n" |
| "\tis set off by an equals ('=') sign.\n\n" |
| "Valid raid options are:\n" |
| "\tstride=<stride length in blocks>\n" |
| "\tresize=<resize maximum size in blocks>\n"); |
| } |
| } |
| |
| static __u32 ok_features[3] = { |
| EXT3_FEATURE_COMPAT_HAS_JOURNAL | |
| EXT2_FEATURE_COMPAT_RESIZE_INODE | |
| EXT2_FEATURE_COMPAT_DIR_INDEX, /* Compat */ |
| EXT2_FEATURE_INCOMPAT_FILETYPE| /* Incompat */ |
| EXT3_FEATURE_INCOMPAT_JOURNAL_DEV| |
| EXT2_FEATURE_INCOMPAT_META_BG, |
| EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER /* R/O compat */ |
| }; |
| |
| static int PRS(int argc, char *argv[]) |
| { |
| int b, c; |
| int size; |
| char * tmp; |
| int blocksize = 0; |
| int inode_ratio = 0; |
| int inode_size = 0; |
| int reserved_ratio = 5; |
| int sector_size = 0; |
| int show_version_only = 0; |
| ext2_ino_t num_inodes = 0; |
| errcode_t retval; |
| char * extended_opts = 0; |
| const char * fs_type = 0; |
| blk_t dev_size; |
| long sysval; |
| |
| /* Update our PATH to include /sbin */ |
| e2fs_set_sbin_path(); |
| |
| tmp = getenv("MKE2FS_SYNC"); |
| if (tmp) |
| sync_kludge = atoi(tmp); |
| |
| /* Determine the system page size if possible */ |
| #if (!defined(_SC_PAGESIZE) && defined(_SC_PAGE_SIZE)) |
| #define _SC_PAGESIZE _SC_PAGE_SIZE |
| #endif |
| #ifdef _SC_PAGESIZE |
| sysval = sysconf(_SC_PAGESIZE); |
| if (sysval > 0) |
| sys_page_size = sysval; |
| #endif /* _SC_PAGESIZE */ |
| |
| setbuf(stdout, NULL); |
| setbuf(stderr, NULL); |
| memset(¶m, 0, sizeof(struct ext2_super_block)); |
| param.s_rev_level = 1; /* Create revision 1 filesystems now */ |
| param.s_feature_incompat |= EXT2_FEATURE_INCOMPAT_FILETYPE; |
| param.s_feature_ro_compat |= EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER; |
| #if 0 |
| param.s_feature_compat |= EXT2_FEATURE_COMPAT_DIR_INDEX; |
| #endif |
| |
| #ifdef __linux__ |
| linux_version_code = get_kernel_revision(); |
| if (linux_version_code && linux_version_code < (2*65536 + 2*256)) { |
| param.s_rev_level = 0; |
| param.s_feature_incompat = 0; |
| param.s_feature_compat = 0; |
| param.s_feature_ro_compat = 0; |
| } |
| #endif |
| |
| /* If called as mkfs.ext3, create a journal inode */ |
| if (last_char_is(bb_applet_name, '3')) |
| journal_size = -1; |
| |
| while ((c = getopt (argc, argv, |
| "b:cE:f:g:i:jl:m:no:qr:R:s:tvI:J:ST:FL:M:N:O:V")) != EOF) { |
| switch (c) { |
| case 'b': |
| if (safe_strtoi(optarg, &blocksize)) |
| goto BLOCKSIZE_ERROR; |
| b = (blocksize > 0) ? blocksize : -blocksize; |
| if (b < EXT2_MIN_BLOCK_SIZE || |
| b > EXT2_MAX_BLOCK_SIZE) { |
| BLOCKSIZE_ERROR: |
| bb_error_msg_and_die("bad block size - %s", optarg); |
| } |
| mke2fs_warning_msg((blocksize > 4096), |
| "blocksize %d not usable on most systems", |
| blocksize); |
| if (blocksize > 0) |
| param.s_log_block_size = |
| int_log2(blocksize >> |
| EXT2_MIN_BLOCK_LOG_SIZE); |
| break; |
| case 'c': /* Check for bad blocks */ |
| case 't': /* deprecated */ |
| cflag++; |
| break; |
| case 'f': |
| if (safe_strtoi(optarg, &size) || size < EXT2_MIN_BLOCK_SIZE || size > EXT2_MAX_BLOCK_SIZE ){ |
| bb_error_msg_and_die("bad fragment size - %s", optarg); |
| } |
| param.s_log_frag_size = |
| int_log2(size >> EXT2_MIN_BLOCK_LOG_SIZE); |
| mke2fs_warning_msg(1, "fragments not supported. Ignoring -f option"); |
| break; |
| case 'g': |
| if (safe_strtoi(optarg, ¶m.s_blocks_per_group)) { |
| bb_error_msg_and_die("Illegal number for blocks per group"); |
| } |
| if ((param.s_blocks_per_group % 8) != 0) { |
| bb_error_msg_and_die("blocks per group must be multiple of 8"); |
| } |
| break; |
| case 'i': |
| if (safe_strtoi(optarg, &inode_ratio) |
| || inode_ratio < EXT2_MIN_BLOCK_SIZE |
| || inode_ratio > EXT2_MAX_BLOCK_SIZE * 1024) { |
| bb_error_msg_and_die("bad inode ratio %s (min %d/max %d)", |
| optarg, EXT2_MIN_BLOCK_SIZE, |
| EXT2_MAX_BLOCK_SIZE); |
| } |
| break; |
| case 'J': |
| parse_journal_opts(&journal_device, &journal_flags, &journal_size, optarg); |
| break; |
| case 'j': |
| param.s_feature_compat |= |
| EXT3_FEATURE_COMPAT_HAS_JOURNAL; |
| if (!journal_size) |
| journal_size = -1; |
| break; |
| case 'l': |
| bad_blocks_filename = optarg; |
| break; |
| case 'm': |
| if (safe_strtoi(optarg, &reserved_ratio) || reserved_ratio > 50 ) { |
| bb_error_msg_and_die("bad reserved blocks percent - %s", optarg); |
| } |
| break; |
| case 'n': |
| noaction++; |
| break; |
| case 'o': |
| creator_os = optarg; |
| break; |
| case 'r': |
| param.s_rev_level = atoi(optarg); |
| if (param.s_rev_level == EXT2_GOOD_OLD_REV) { |
| param.s_feature_incompat = 0; |
| param.s_feature_compat = 0; |
| param.s_feature_ro_compat = 0; |
| } |
| break; |
| case 's': /* deprecated */ |
| if (atoi(optarg)) |
| param.s_feature_ro_compat |= |
| EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER; |
| else |
| param.s_feature_ro_compat &= |
| ~EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER; |
| break; |
| #ifdef EXT2_DYNAMIC_REV |
| case 'I': |
| if (safe_strtoi(optarg, &inode_size)) { |
| bb_error_msg_and_die("bad inode size - %s", optarg); |
| } |
| break; |
| #endif |
| case 'N': |
| num_inodes = atoi(optarg); |
| break; |
| case 'v': |
| quiet = 0; |
| break; |
| case 'q': |
| quiet = 1; |
| break; |
| case 'F': |
| force = 1; |
| break; |
| case 'L': |
| volume_label = optarg; |
| break; |
| case 'M': |
| mount_dir = optarg; |
| break; |
| case 'O': |
| if (!strcmp(optarg, "none")) { |
| param.s_feature_compat = 0; |
| param.s_feature_incompat = 0; |
| param.s_feature_ro_compat = 0; |
| break; |
| } |
| if (e2p_edit_feature(optarg, |
| ¶m.s_feature_compat, |
| ok_features)) { |
| bb_error_msg_and_die("Invalid filesystem option set: %s", optarg); |
| } |
| break; |
| case 'E': |
| case 'R': |
| extended_opts = optarg; |
| break; |
| case 'S': |
| super_only = 1; |
| break; |
| case 'T': |
| fs_type = optarg; |
| break; |
| case 'V': |
| /* Print version number and exit */ |
| show_version_only = 1; |
| quiet = 0; |
| break; |
| default: |
| bb_show_usage(); |
| } |
| } |
| if ((optind == argc) /*&& !show_version_only*/) |
| bb_show_usage(); |
| device_name = argv[optind++]; |
| |
| mke2fs_verbose("mke2fs %s (%s)\n", E2FSPROGS_VERSION, E2FSPROGS_DATE); |
| |
| if (show_version_only) { |
| return 0; |
| } |
| |
| /* |
| * If there's no blocksize specified and there is a journal |
| * device, use it to figure out the blocksize |
| */ |
| if (blocksize <= 0 && journal_device) { |
| ext2_filsys jfs; |
| io_manager io_ptr; |
| |
| #ifdef CONFIG_TESTIO_DEBUG |
| io_ptr = test_io_manager; |
| test_io_backing_manager = unix_io_manager; |
| #else |
| io_ptr = unix_io_manager; |
| #endif |
| retval = ext2fs_open(journal_device, |
| EXT2_FLAG_JOURNAL_DEV_OK, 0, |
| 0, io_ptr, &jfs); |
| mke2fs_error_msg_and_die(retval, "open journal device %s", journal_device); |
| if ((blocksize < 0) && (jfs->blocksize < (unsigned) (-blocksize))) { |
| bb_error_msg_and_die( |
| "Journal dev blocksize (%d) smaller than " |
| "minimum blocksize %d\n", jfs->blocksize, |
| -blocksize); |
| } |
| blocksize = jfs->blocksize; |
| param.s_log_block_size = |
| int_log2(blocksize >> EXT2_MIN_BLOCK_LOG_SIZE); |
| ext2fs_close(jfs); |
| } |
| |
| if (blocksize > sys_page_size) { |
| mke2fs_warning_msg(1, "%d-byte blocks too big for system (max %d)", |
| blocksize, sys_page_size); |
| if (!force) { |
| proceed_question(); |
| } |
| bb_error_msg("Forced to continue"); |
| } |
| mke2fs_warning_msg(((blocksize > 4096) && |
| (param.s_feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL)), |
| "some 2.4 kernels do not support " |
| "blocksizes greater than 4096 using ext3.\n" |
| "Use -b 4096 if this is an issue for you\n"); |
| |
| if (optind < argc) { |
| param.s_blocks_count = parse_num_blocks(argv[optind++], |
| param.s_log_block_size); |
| mke2fs_error_msg_and_die(!param.s_blocks_count, "bad blocks count - %s", argv[optind - 1]); |
| } |
| if (optind < argc) |
| bb_show_usage(); |
| |
| if (param.s_feature_incompat & EXT3_FEATURE_INCOMPAT_JOURNAL_DEV) { |
| if (!fs_type) |
| fs_type = "journal"; |
| reserved_ratio = 0; |
| param.s_feature_incompat = EXT3_FEATURE_INCOMPAT_JOURNAL_DEV; |
| param.s_feature_compat = 0; |
| param.s_feature_ro_compat = 0; |
| } |
| if (param.s_rev_level == EXT2_GOOD_OLD_REV && |
| (param.s_feature_compat || param.s_feature_ro_compat || |
| param.s_feature_incompat)) |
| param.s_rev_level = 1; /* Create a revision 1 filesystem */ |
| |
| check_plausibility(device_name , force); |
| check_mount(device_name, force, "filesystem"); |
| |
| param.s_log_frag_size = param.s_log_block_size; |
| |
| if (noaction && param.s_blocks_count) { |
| dev_size = param.s_blocks_count; |
| retval = 0; |
| } else { |
| retry: |
| retval = ext2fs_get_device_size(device_name, |
| EXT2_BLOCK_SIZE(¶m), |
| &dev_size); |
| if ((retval == EFBIG) && |
| (blocksize == 0) && |
| (param.s_log_block_size == 0)) { |
| param.s_log_block_size = 2; |
| blocksize = 4096; |
| goto retry; |
| } |
| } |
| |
| mke2fs_error_msg_and_die((retval && (retval != EXT2_ET_UNIMPLEMENTED)),"determine filesystem size"); |
| |
| if (!param.s_blocks_count) { |
| if (retval == EXT2_ET_UNIMPLEMENTED) { |
| mke2fs_error_msg_and_die(1, |
| "determine device size; you " |
| "must specify\nthe size of the " |
| "filesystem"); |
| } else { |
| if (dev_size == 0) { |
| bb_error_msg_and_die( |
| "Device size reported to be zero. " |
| "Invalid partition specified, or\n\t" |
| "partition table wasn't reread " |
| "after running fdisk, due to\n\t" |
| "a modified partition being busy " |
| "and in use. You may need to reboot\n\t" |
| "to re-read your partition table.\n" |
| ); |
| } |
| param.s_blocks_count = dev_size; |
| if (sys_page_size > EXT2_BLOCK_SIZE(¶m)) |
| param.s_blocks_count &= ~((sys_page_size / |
| EXT2_BLOCK_SIZE(¶m))-1); |
| } |
| |
| } else if (!force && (param.s_blocks_count > dev_size)) { |
| bb_error_msg("Filesystem larger than apparent device size"); |
| proceed_question(); |
| } |
| |
| /* |
| * If the user asked for HAS_JOURNAL, then make sure a journal |
| * gets created. |
| */ |
| if ((param.s_feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL) && |
| !journal_size) |
| journal_size = -1; |
| |
| /* Set first meta blockgroup via an environment variable */ |
| /* (this is mostly for debugging purposes) */ |
| if ((param.s_feature_incompat & EXT2_FEATURE_INCOMPAT_META_BG) && |
| ((tmp = getenv("MKE2FS_FIRST_META_BG")))) |
| param.s_first_meta_bg = atoi(tmp); |
| |
| /* Get the hardware sector size, if available */ |
| retval = ext2fs_get_device_sectsize(device_name, §or_size); |
| mke2fs_error_msg_and_die(retval, "determine hardware sector size"); |
| |
| if ((tmp = getenv("MKE2FS_DEVICE_SECTSIZE")) != NULL) |
| sector_size = atoi(tmp); |
| |
| set_fs_defaults(fs_type, ¶m, blocksize, sector_size, &inode_ratio); |
| blocksize = EXT2_BLOCK_SIZE(¶m); |
| |
| if (extended_opts) |
| parse_extended_opts(¶m, extended_opts); |
| |
| /* Since sparse_super is the default, we would only have a problem |
| * here if it was explicitly disabled. |
| */ |
| if ((param.s_feature_compat & EXT2_FEATURE_COMPAT_RESIZE_INODE) && |
| !(param.s_feature_ro_compat&EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER)) { |
| bb_error_msg_and_die("reserved online resize blocks not supported " |
| "on non-sparse filesystem"); |
| } |
| |
| if (param.s_blocks_per_group) { |
| if (param.s_blocks_per_group < 256 || |
| param.s_blocks_per_group > 8 * (unsigned) blocksize) { |
| bb_error_msg_and_die("blocks per group count out of range"); |
| } |
| } |
| |
| if (inode_size) { |
| if (inode_size < EXT2_GOOD_OLD_INODE_SIZE || |
| inode_size > EXT2_BLOCK_SIZE(¶m) || |
| inode_size & (inode_size - 1)) { |
| bb_error_msg_and_die("bad inode size %d (min %d/max %d)", |
| inode_size, EXT2_GOOD_OLD_INODE_SIZE, |
| blocksize); |
| } |
| mke2fs_warning_msg((inode_size != EXT2_GOOD_OLD_INODE_SIZE), |
| "%d-byte inodes not usable on most systems", |
| inode_size); |
| param.s_inode_size = inode_size; |
| } |
| |
| /* |
| * Calculate number of inodes based on the inode ratio |
| */ |
| param.s_inodes_count = num_inodes ? num_inodes : |
| ((__u64) param.s_blocks_count * blocksize) |
| / inode_ratio; |
| |
| /* |
| * Calculate number of blocks to reserve |
| */ |
| param.s_r_blocks_count = (param.s_blocks_count * reserved_ratio) / 100; |
| return 1; |
| } |
| |
| static void clean_up(void) |
| { |
| if (ENABLE_FEATURE_CLEAN_UP && journal_device) free(journal_device); |
| } |
| |
| int mke2fs_main (int argc, char *argv[]) |
| { |
| errcode_t retval; |
| ext2_filsys fs; |
| badblocks_list bb_list = 0; |
| unsigned int i; |
| int val; |
| io_manager io_ptr; |
| |
| if (ENABLE_FEATURE_CLEAN_UP) |
| atexit(clean_up); |
| if(!PRS(argc, argv)) |
| return 0; |
| |
| #ifdef CONFIG_TESTIO_DEBUG |
| io_ptr = test_io_manager; |
| test_io_backing_manager = unix_io_manager; |
| #else |
| io_ptr = unix_io_manager; |
| #endif |
| |
| /* |
| * Initialize the superblock.... |
| */ |
| retval = ext2fs_initialize(device_name, 0, ¶m, |
| io_ptr, &fs); |
| mke2fs_error_msg_and_die(retval, "set up superblock"); |
| |
| /* |
| * Wipe out the old on-disk superblock |
| */ |
| if (!noaction) |
| zap_sector(fs, 2, 6); |
| |
| /* |
| * Generate a UUID for it... |
| */ |
| uuid_generate(fs->super->s_uuid); |
| |
| /* |
| * Initialize the directory index variables |
| */ |
| fs->super->s_def_hash_version = EXT2_HASH_TEA; |
| uuid_generate((unsigned char *) fs->super->s_hash_seed); |
| |
| /* |
| * Add "jitter" to the superblock's check interval so that we |
| * don't check all the filesystems at the same time. We use a |
| * kludgy hack of using the UUID to derive a random jitter value. |
| */ |
| for (i = 0, val = 0 ; i < sizeof(fs->super->s_uuid); i++) |
| val += fs->super->s_uuid[i]; |
| fs->super->s_max_mnt_count += val % EXT2_DFL_MAX_MNT_COUNT; |
| |
| /* |
| * Override the creator OS, if applicable |
| */ |
| if (creator_os && !set_os(fs->super, creator_os)) { |
| bb_error_msg_and_die("unknown os - %s", creator_os); |
| } |
| |
| /* |
| * For the Hurd, we will turn off filetype since it doesn't |
| * support it. |
| */ |
| if (fs->super->s_creator_os == EXT2_OS_HURD) |
| fs->super->s_feature_incompat &= |
| ~EXT2_FEATURE_INCOMPAT_FILETYPE; |
| |
| /* |
| * Set the volume label... |
| */ |
| if (volume_label) { |
| snprintf(fs->super->s_volume_name, sizeof(fs->super->s_volume_name), "%s", volume_label); |
| } |
| |
| /* |
| * Set the last mount directory |
| */ |
| if (mount_dir) { |
| snprintf(fs->super->s_last_mounted, sizeof(fs->super->s_last_mounted), "%s", mount_dir); |
| } |
| |
| if (!quiet || noaction) |
| show_stats(fs); |
| |
| if (noaction) |
| return 0; |
| |
| if (fs->super->s_feature_incompat & |
| EXT3_FEATURE_INCOMPAT_JOURNAL_DEV) { |
| create_journal_dev(fs); |
| return (ext2fs_close(fs) ? 1 : 0); |
| } |
| |
| if (bad_blocks_filename) |
| read_bb_file(fs, &bb_list, bad_blocks_filename); |
| if (cflag) |
| test_disk(fs, &bb_list); |
| |
| handle_bad_blocks(fs, bb_list); |
| fs->stride = fs_stride; |
| retval = ext2fs_allocate_tables(fs); |
| mke2fs_error_msg_and_die(retval, "allocate filesystem tables"); |
| if (super_only) { |
| fs->super->s_state |= EXT2_ERROR_FS; |
| fs->flags &= ~(EXT2_FLAG_IB_DIRTY|EXT2_FLAG_BB_DIRTY); |
| } else { |
| /* rsv must be a power of two (64kB is MD RAID sb alignment) */ |
| unsigned int rsv = 65536 / fs->blocksize; |
| unsigned long blocks = fs->super->s_blocks_count; |
| unsigned long start; |
| blk_t ret_blk; |
| |
| #ifdef ZAP_BOOTBLOCK |
| zap_sector(fs, 0, 2); |
| #endif |
| |
| /* |
| * Wipe out any old MD RAID (or other) metadata at the end |
| * of the device. This will also verify that the device is |
| * as large as we think. Be careful with very small devices. |
| */ |
| start = (blocks & ~(rsv - 1)); |
| if (start > rsv) |
| start -= rsv; |
| if (start > 0) |
| retval = zero_blocks(fs, start, blocks - start, |
| NULL, &ret_blk, NULL); |
| |
| mke2fs_warning_msg(retval, "could not zero block %u at end of filesystem", ret_blk); |
| write_inode_tables(fs); |
| create_root_dir(fs); |
| create_lost_and_found(fs); |
| reserve_inodes(fs); |
| create_bad_block_inode(fs, bb_list); |
| if (fs->super->s_feature_compat & |
| EXT2_FEATURE_COMPAT_RESIZE_INODE) { |
| retval = ext2fs_create_resize_inode(fs); |
| mke2fs_error_msg_and_die(retval, "reserve blocks for online resize"); |
| } |
| } |
| |
| if (journal_device) { |
| make_journal_device(journal_device, fs, quiet, force); |
| } else if (journal_size) { |
| make_journal_blocks(fs, journal_size, journal_flags, quiet); |
| } |
| |
| mke2fs_verbose("Writing superblocks and filesystem accounting information: "); |
| retval = ext2fs_flush(fs); |
| mke2fs_warning_msg(retval, "had trouble writing out superblocks"); |
| mke2fs_verbose_done(); |
| if (!quiet && !getenv("MKE2FS_SKIP_CHECK_MSG")) |
| print_check_message(fs); |
| val = ext2fs_close(fs); |
| return (retval || val) ? 1 : 0; |
| } |