shell/shell_common.c - codeaurora/busybox - Gitiles

 /* vi: set sw=4 ts=4: */
 /*
  * Adapted from ash applet code
  *
  * This code is derived from software contributed to Berkeley by
  * Kenneth Almquist.
  *
  * Copyright (c) 1989, 1991, 1993, 1994
  *      The Regents of the University of California.  All rights reserved.
  *
  * Copyright (c) 1997-2005 Herbert Xu <herbert@gondor.apana.org.au>
  * was re-ported from NetBSD and debianized.
  *
  * Copyright (c) 2010 Denys Vlasenko
  * Split from ash.c
  *
  * Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
  */
 #include "libbb.h"
 #include "shell_common.h"

 const char defifsvar[] ALIGN1 = "IFS= \t\n";


 int FAST_FUNC is_well_formed_var_name(const char *s, char terminator)
 {
 	if (!s || !(isalpha(*s) || *s == '_'))
 		return 0;

 	do
 		s++;
 	while (isalnum(*s) || *s == '_');

 	return *s == terminator;
 }

 /* read builtin */

 //TODO: use more efficient setvar() which takes a pointer to malloced "VAR=VAL"
 //string. hush naturally has it, and ash has setvareq().
 //Here we can simply store "VAR=" at buffer start and store read data directly
 //after "=", then pass buffer to setvar() to consume.
 const char* FAST_FUNC
 shell_builtin_read(void FAST_FUNC (*setvar)(const char *name, const char *val),
 	char       **argv,
 	const char *ifs,
 	int        read_flags,
 	const char *opt_n,
 	const char *opt_p,
 	const char *opt_t,
 	const char *opt_u
 )
 {
 	unsigned end_ms; /* -t TIMEOUT */
 	int fd; /* -u FD */
 	int nchars; /* -n NUM */
 	char **pp;
 	char *buffer;
 	struct termios tty, old_tty;
 	const char *retval;
 	int bufpos; /* need to be able to hold -1 */
 	int startword;
 	smallint backslash;

 	pp = argv;
 	while (*pp) {
 		if (!is_well_formed_var_name(*pp, '\0')) {
 			/* Mimic bash message */
 			bb_error_msg("read: '%s': not a valid identifier", *pp);
 			return (const char *)(uintptr_t)1;
 		}
 		pp++;
 	}

 	nchars = 0; /* if != 0, -n is in effect */
 	if (opt_n) {
 		nchars = bb_strtou(opt_n, NULL, 10);
 		if (nchars < 0 || errno)
 			return "invalid count";
 		/* note: "-n 0": off (bash 3.2 does this too) */
 	}
 	end_ms = 0;
 	if (opt_t) {
 		end_ms = bb_strtou(opt_t, NULL, 10);
 		if (errno || end_ms > UINT_MAX / 2048)
 			return "invalid timeout";
 		end_ms *= 1000;
 #if 0 /* even bash has no -t N.NNN support */
 		ts.tv_sec = bb_strtou(opt_t, &p, 10);
 		ts.tv_usec = 0;
 		/* EINVAL means number is ok, but not terminated by NUL */
 		if (*p == '.' && errno == EINVAL) {
 			char *p2;
 			if (*++p) {
 				int scale;
 				ts.tv_usec = bb_strtou(p, &p2, 10);
 				if (errno)
 					return "invalid timeout";
 				scale = p2 - p;
 				/* normalize to usec */
 				if (scale > 6)
 					return "invalid timeout";
 				while (scale++ < 6)
 					ts.tv_usec *= 10;
 			}
 		} else if (ts.tv_sec < 0 || errno) {
 			return "invalid timeout";
 		}
 		if (!(ts.tv_sec | ts.tv_usec)) { /* both are 0? */
 			return "invalid timeout";
 		}
 #endif /* if 0 */
 	}
 	fd = STDIN_FILENO;
 	if (opt_u) {
 		fd = bb_strtou(opt_u, NULL, 10);
 		if (fd < 0 || errno)
 			return "invalid file descriptor";
 	}

 	if (opt_p && isatty(fd)) {
 		fputs(opt_p, stderr);
 		fflush_all();
 	}

 	if (ifs == NULL)
 		ifs = defifs;

 	if (nchars || (read_flags & BUILTIN_READ_SILENT)) {
 		tcgetattr(fd, &tty);
 		old_tty = tty;
 		if (nchars) {
 			tty.c_lflag &= ~ICANON;
 			tty.c_cc[VMIN] = nchars < 256 ? nchars : 255;
 		}
 		if (read_flags & BUILTIN_READ_SILENT) {
 			tty.c_lflag &= ~(ECHO | ECHOK | ECHONL);
 		}
 		/* This forces execution of "restoring" tcgetattr later */
 		read_flags |= BUILTIN_READ_SILENT;
 		/* if tcgetattr failed, tcsetattr will fail too.
 		 * Ignoring, it's harmless. */
 		tcsetattr(fd, TCSANOW, &tty);
 	}

 	retval = (const char *)(uintptr_t)0;
 	startword = 1;
 	backslash = 0;
 	if (end_ms) /* NB: end_ms stays nonzero: */
 		end_ms = ((unsigned)monotonic_ms() + end_ms) | 1;
 	buffer = NULL;
 	bufpos = 0;
 	do {
 		char c;

 		if (end_ms) {
 			int timeout;
 			struct pollfd pfd[1];

 			pfd[0].fd = fd;
 			pfd[0].events = POLLIN;
 			timeout = end_ms - (unsigned)monotonic_ms();
 			if (timeout <= 0 /* already late? */
 			 || safe_poll(pfd, 1, timeout) != 1 /* no? wait... */
 			) { /* timed out! */
 				retval = (const char *)(uintptr_t)1;
 				goto ret;
 			}
 		}

 		if ((bufpos & 0xff) == 0)
 			buffer = xrealloc(buffer, bufpos + 0x100);
 		if (nonblock_safe_read(fd, &buffer[bufpos], 1) != 1) {
 			retval = (const char *)(uintptr_t)1;
 			break;
 		}
 		c = buffer[bufpos];
 		if (c == '\0')
 			continue;
 		if (backslash) {
 			backslash = 0;
 			if (c != '\n')
 				goto put;
 			continue;
 		}
 		if (!(read_flags & BUILTIN_READ_RAW) && c == '\\') {
 			backslash = 1;
 			continue;
 		}
 		if (c == '\n')
 			break;

 		/* $IFS splitting. NOT done if we run "read"
 		 * without variable names (bash compat).
 		 * Thus, "read" and "read REPLY" are not the same.
 		 */
 		if (argv[0]) {
 /* http://www.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_06_05 */
 			const char *is_ifs = strchr(ifs, c);
 			if (startword && is_ifs) {
 				if (isspace(c))
 					continue;
 				/* it is a non-space ifs char */
 				startword--;
 				if (startword == 1) /* first one? */
 					continue; /* yes, it is not next word yet */
 			}
 			startword = 0;
 			if (argv[1] != NULL && is_ifs) {
 				buffer[bufpos] = '\0';
 				bufpos = 0;
 				setvar(*argv, buffer);
 				argv++;
 				/* can we skip one non-space ifs char? (2: yes) */
 				startword = isspace(c) ? 2 : 1;
 				continue;
 			}
 		}
  put:
 		bufpos++;
 	} while (--nchars);

 	if (argv[0]) {
 		/* Remove trailing space $IFS chars */
 		while (--bufpos >= 0 && isspace(buffer[bufpos]) && strchr(ifs, buffer[bufpos]) != NULL)
 			continue;
 		buffer[bufpos + 1] = '\0';
 		/* Use the remainder as a value for the next variable */
 		setvar(*argv, buffer);
 		/* Set the rest to "" */
 		while (*++argv)
 			setvar(*argv, "");
 	} else {
 		/* Note: no $IFS removal */
 		buffer[bufpos] = '\0';
 		setvar("REPLY", buffer);
 	}

  ret:
 	free(buffer);
 	if (read_flags & BUILTIN_READ_SILENT)
 		tcsetattr(fd, TCSANOW, &old_tty);
 	return retval;
 }

 /* ulimit builtin */

 struct limits {
 	uint8_t cmd;            /* RLIMIT_xxx fit into it */
 	uint8_t factor_shift;   /* shift by to get rlim_{cur,max} values */
 	char option;
 	const char *name;
 };

 static const struct limits limits_tbl[] = {
 #ifdef RLIMIT_FSIZE
 	{ RLIMIT_FSIZE,		9,	'f',	"file size (blocks)" },
 #endif
 #ifdef RLIMIT_CPU
 	{ RLIMIT_CPU,		0,	't',	"cpu time (seconds)" },
 #endif
 #ifdef RLIMIT_DATA
 	{ RLIMIT_DATA,		10,	'd',	"data seg size (kb)" },
 #endif
 #ifdef RLIMIT_STACK
 	{ RLIMIT_STACK,		10,	's',	"stack size (kb)" },
 #endif
 #ifdef RLIMIT_CORE
 	{ RLIMIT_CORE,		9,	'c',	"core file size (blocks)" },
 #endif
 #ifdef RLIMIT_RSS
 	{ RLIMIT_RSS,		10,	'm',	"resident set size (kb)" },
 #endif
 #ifdef RLIMIT_MEMLOCK
 	{ RLIMIT_MEMLOCK,	10,	'l',	"locked memory (kb)" },
 #endif
 #ifdef RLIMIT_NPROC
 	{ RLIMIT_NPROC,		0,	'p',	"processes" },
 #endif
 #ifdef RLIMIT_NOFILE
 	{ RLIMIT_NOFILE,	0,	'n',	"file descriptors" },
 #endif
 #ifdef RLIMIT_AS
 	{ RLIMIT_AS,		10,	'v',	"address space (kb)" },
 #endif
 #ifdef RLIMIT_LOCKS
 	{ RLIMIT_LOCKS,		0,	'w',	"locks" },
 #endif
 };

 enum {
 	OPT_hard = (1 << 0),
 	OPT_soft = (1 << 1),
 };

 /* "-": treat args as parameters of option with ASCII code 1 */
 static const char ulimit_opt_string[] = "-HSa"
 #ifdef RLIMIT_FSIZE
 			"f::"
 #endif
 #ifdef RLIMIT_CPU
 			"t::"
 #endif
 #ifdef RLIMIT_DATA
 			"d::"
 #endif
 #ifdef RLIMIT_STACK
 			"s::"
 #endif
 #ifdef RLIMIT_CORE
 			"c::"
 #endif
 #ifdef RLIMIT_RSS
 			"m::"
 #endif
 #ifdef RLIMIT_MEMLOCK
 			"l::"
 #endif
 #ifdef RLIMIT_NPROC
 			"p::"
 #endif
 #ifdef RLIMIT_NOFILE
 			"n::"
 #endif
 #ifdef RLIMIT_AS
 			"v::"
 #endif
 #ifdef RLIMIT_LOCKS
 			"w::"
 #endif
 			;

 static void printlim(unsigned opts, const struct rlimit *limit,
 			const struct limits *l)
 {
 	rlim_t val;

 	val = limit->rlim_max;
 	if (!(opts & OPT_hard))
 		val = limit->rlim_cur;

 	if (val == RLIM_INFINITY)
 		printf("unlimited\n");
 	else {
 		val >>= l->factor_shift;
 		printf("%llu\n", (long long) val);
 	}
 }

 int FAST_FUNC
 shell_builtin_ulimit(char **argv)
 {
 	unsigned opts;
 	unsigned argc;

 	/* We can't use getopt32: need to handle commands like
 	 * ulimit 123 -c2 -l 456
 	 */

 	/* In case getopt was already called:
 	 * reset the libc getopt() function, which keeps internal state.
 	 */
 #ifdef __GLIBC__
 	optind = 0;
 #else /* BSD style */
 	optind = 1;
 	/* optreset = 1; */
 #endif
 	/* optarg = NULL; opterr = 0; optopt = 0; - do we need this?? */

         argc = 1;
         while (argv[argc])
                 argc++;

 	opts = 0;
 	while (1) {
 		struct rlimit limit;
 		const struct limits *l;
 		int opt_char = getopt(argc, argv, ulimit_opt_string);

 		if (opt_char == -1)
 			break;
 		if (opt_char == 'H') {
 			opts |= OPT_hard;
 			continue;
 		}
 		if (opt_char == 'S') {
 			opts |= OPT_soft;
 			continue;
 		}

 		if (opt_char == 'a') {
 			for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) {
 				getrlimit(l->cmd, &limit);
 				printf("-%c: %-30s ", l->option, l->name);
 				printlim(opts, &limit, l);
 			}
 			continue;
 		}

 		if (opt_char == 1)
 			opt_char = 'f';
 		for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) {
 			if (opt_char == l->option) {
 				char *val_str;

 				getrlimit(l->cmd, &limit);

 				val_str = optarg;
 				if (!val_str && argv[optind] && argv[optind][0] != '-')
 					val_str = argv[optind++]; /* ++ skips NN in "-c NN" case */
 				if (val_str) {
 					rlim_t val;

 					if (strcmp(val_str, "unlimited") == 0)
 						val = RLIM_INFINITY;
 					else {
 						if (sizeof(val) == sizeof(int))
 							val = bb_strtou(val_str, NULL, 10);
 						else if (sizeof(val) == sizeof(long))
 							val = bb_strtoul(val_str, NULL, 10);
 						else
 							val = bb_strtoull(val_str, NULL, 10);
 						if (errno) {
 							bb_error_msg("bad number");
 							return EXIT_FAILURE;
 						}
 						val <<= l->factor_shift;
 					}
 //bb_error_msg("opt %c val_str:'%s' val:%lld", opt_char, val_str, (long long)val);
 					/* from man bash: "If neither -H nor -S
 					 * is specified, both the soft and hard
 					 * limits are set. */
 					if (!opts)
 						opts = OPT_hard + OPT_soft;
 					if (opts & OPT_hard)
 						limit.rlim_max = val;
 					if (opts & OPT_soft)
 						limit.rlim_cur = val;
 //bb_error_msg("setrlimit(%d, %lld, %lld)", l->cmd, (long long)limit.rlim_cur, (long long)limit.rlim_max);
 					if (setrlimit(l->cmd, &limit) < 0) {
 						bb_perror_msg("error setting limit");
 						return EXIT_FAILURE;
 					}
 				} else {
 					printlim(opts, &limit, l);
 				}
 				break;
 			}
 		} /* for (every possible opt) */

 		if (l == &limits_tbl[ARRAY_SIZE(limits_tbl)]) {
 			/* bad option. getopt already complained. */
 			break;
 		}

 	} /* while (there are options) */

 	return 0;
 }
	/* vi: set sw=4 ts=4: */
	/*
	* Adapted from ash applet code
	*
	* This code is derived from software contributed to Berkeley by
	* Kenneth Almquist.
	*
	* Copyright (c) 1989, 1991, 1993, 1994
	* The Regents of the University of California. All rights reserved.
	*
	* Copyright (c) 1997-2005 Herbert Xu <herbert@gondor.apana.org.au>
	* was re-ported from NetBSD and debianized.
	*
	* Copyright (c) 2010 Denys Vlasenko
	* Split from ash.c
	*
	* Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
	*/
	#include "libbb.h"
	#include "shell_common.h"

	const char defifsvar[] ALIGN1 = "IFS= \t\n";


	int FAST_FUNC is_well_formed_var_name(const char *s, char terminator)
	{
	if (!s \|\| !(isalpha(s) \|\| s == '_'))
	return 0;

	do
	s++;
	while (isalnum(s) \|\| s == '_');

	return *s == terminator;
	}

	/* read builtin */

	//TODO: use more efficient setvar() which takes a pointer to malloced "VAR=VAL"
	//string. hush naturally has it, and ash has setvareq().
	//Here we can simply store "VAR=" at buffer start and store read data directly
	//after "=", then pass buffer to setvar() to consume.
	const char* FAST_FUNC
	shell_builtin_read(void FAST_FUNC (setvar)(const char name, const char *val),
	char **argv,
	const char *ifs,
	int read_flags,
	const char *opt_n,
	const char *opt_p,
	const char *opt_t,
	const char *opt_u
	)
	{
	unsigned end_ms; /* -t TIMEOUT */
	int fd; /* -u FD */
	int nchars; /* -n NUM */
	char **pp;
	char *buffer;
	struct termios tty, old_tty;
	const char *retval;
	int bufpos; /* need to be able to hold -1 */
	int startword;
	smallint backslash;

	pp = argv;
	while (*pp) {
	if (!is_well_formed_var_name(*pp, '\0')) {
	/* Mimic bash message */
	bb_error_msg("read: '%s': not a valid identifier", *pp);
	return (const char *)(uintptr_t)1;
	}
	pp++;
	}

	nchars = 0; /* if != 0, -n is in effect */
	if (opt_n) {
	nchars = bb_strtou(opt_n, NULL, 10);
	if (nchars < 0 \|\| errno)
	return "invalid count";
	/* note: "-n 0": off (bash 3.2 does this too) */
	}
	end_ms = 0;
	if (opt_t) {
	end_ms = bb_strtou(opt_t, NULL, 10);
	if (errno \|\| end_ms > UINT_MAX / 2048)
	return "invalid timeout";
	end_ms *= 1000;
	#if 0 /* even bash has no -t N.NNN support */
	ts.tv_sec = bb_strtou(opt_t, &p, 10);
	ts.tv_usec = 0;
	/* EINVAL means number is ok, but not terminated by NUL */
	if (*p == '.' && errno == EINVAL) {
	char *p2;
	if (*++p) {
	int scale;
	ts.tv_usec = bb_strtou(p, &p2, 10);
	if (errno)
	return "invalid timeout";
	scale = p2 - p;
	/* normalize to usec */
	if (scale > 6)
	return "invalid timeout";
	while (scale++ < 6)
	ts.tv_usec *= 10;
	}
	} else if (ts.tv_sec < 0 \|\| errno) {
	return "invalid timeout";
	}
	if (!(ts.tv_sec \| ts.tv_usec)) { /* both are 0? */
	return "invalid timeout";
	}
	#endif /* if 0 */
	}
	fd = STDIN_FILENO;
	if (opt_u) {
	fd = bb_strtou(opt_u, NULL, 10);
	if (fd < 0 \|\| errno)
	return "invalid file descriptor";
	}

	if (opt_p && isatty(fd)) {
	fputs(opt_p, stderr);
	fflush_all();
	}

	if (ifs == NULL)
	ifs = defifs;

	if (nchars \|\| (read_flags & BUILTIN_READ_SILENT)) {
	tcgetattr(fd, &tty);
	old_tty = tty;
	if (nchars) {
	tty.c_lflag &= ~ICANON;
	tty.c_cc[VMIN] = nchars < 256 ? nchars : 255;
	}
	if (read_flags & BUILTIN_READ_SILENT) {
	tty.c_lflag &= ~(ECHO \| ECHOK \| ECHONL);
	}
	/* This forces execution of "restoring" tcgetattr later */
	read_flags \|= BUILTIN_READ_SILENT;
	/* if tcgetattr failed, tcsetattr will fail too.
	* Ignoring, it's harmless. */
	tcsetattr(fd, TCSANOW, &tty);
	}

	retval = (const char *)(uintptr_t)0;
	startword = 1;
	backslash = 0;
	if (end_ms) /* NB: end_ms stays nonzero: */
	end_ms = ((unsigned)monotonic_ms() + end_ms) \| 1;
	buffer = NULL;
	bufpos = 0;
	do {
	char c;

	if (end_ms) {
	int timeout;
	struct pollfd pfd[1];

	pfd[0].fd = fd;
	pfd[0].events = POLLIN;
	timeout = end_ms - (unsigned)monotonic_ms();
	if (timeout <= 0 /* already late? */
	\|\| safe_poll(pfd, 1, timeout) != 1 /* no? wait... */
	) { /* timed out! */
	retval = (const char *)(uintptr_t)1;
	goto ret;
	}
	}

	if ((bufpos & 0xff) == 0)
	buffer = xrealloc(buffer, bufpos + 0x100);
	if (nonblock_safe_read(fd, &buffer[bufpos], 1) != 1) {
	retval = (const char *)(uintptr_t)1;
	break;
	}
	c = buffer[bufpos];
	if (c == '\0')
	continue;
	if (backslash) {
	backslash = 0;
	if (c != '\n')
	goto put;
	continue;
	}
	if (!(read_flags & BUILTIN_READ_RAW) && c == '\\') {
	backslash = 1;
	continue;
	}
	if (c == '\n')
	break;

	/* $IFS splitting. NOT done if we run "read"
	* without variable names (bash compat).
	* Thus, "read" and "read REPLY" are not the same.
	*/
	if (argv[0]) {
	/* http://www.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_06_05 */
	const char *is_ifs = strchr(ifs, c);
	if (startword && is_ifs) {
	if (isspace(c))
	continue;
	/* it is a non-space ifs char */
	startword--;
	if (startword == 1) /* first one? */
	continue; /* yes, it is not next word yet */
	}
	startword = 0;
	if (argv[1] != NULL && is_ifs) {
	buffer[bufpos] = '\0';
	bufpos = 0;
	setvar(*argv, buffer);
	argv++;
	/* can we skip one non-space ifs char? (2: yes) */
	startword = isspace(c) ? 2 : 1;
	continue;
	}
	}
	put:
	bufpos++;
	} while (--nchars);

	if (argv[0]) {
	/* Remove trailing space $IFS chars */
	while (--bufpos >= 0 && isspace(buffer[bufpos]) && strchr(ifs, buffer[bufpos]) != NULL)
	continue;
	buffer[bufpos + 1] = '\0';
	/* Use the remainder as a value for the next variable */
	setvar(*argv, buffer);
	/* Set the rest to "" */
	while (*++argv)
	setvar(*argv, "");
	} else {
	/* Note: no $IFS removal */
	buffer[bufpos] = '\0';
	setvar("REPLY", buffer);
	}

	ret:
	free(buffer);
	if (read_flags & BUILTIN_READ_SILENT)
	tcsetattr(fd, TCSANOW, &old_tty);
	return retval;
	}

	/* ulimit builtin */

	struct limits {
	uint8_t cmd; /* RLIMIT_xxx fit into it */
	uint8_t factor_shift; /* shift by to get rlim_{cur,max} values */
	char option;
	const char *name;
	};

	static const struct limits limits_tbl[] = {
	#ifdef RLIMIT_FSIZE
	{ RLIMIT_FSIZE, 9, 'f', "file size (blocks)" },
	#endif
	#ifdef RLIMIT_CPU
	{ RLIMIT_CPU, 0, 't', "cpu time (seconds)" },
	#endif
	#ifdef RLIMIT_DATA
	{ RLIMIT_DATA, 10, 'd', "data seg size (kb)" },
	#endif
	#ifdef RLIMIT_STACK
	{ RLIMIT_STACK, 10, 's', "stack size (kb)" },
	#endif
	#ifdef RLIMIT_CORE
	{ RLIMIT_CORE, 9, 'c', "core file size (blocks)" },
	#endif
	#ifdef RLIMIT_RSS
	{ RLIMIT_RSS, 10, 'm', "resident set size (kb)" },
	#endif
	#ifdef RLIMIT_MEMLOCK
	{ RLIMIT_MEMLOCK, 10, 'l', "locked memory (kb)" },
	#endif
	#ifdef RLIMIT_NPROC
	{ RLIMIT_NPROC, 0, 'p', "processes" },
	#endif
	#ifdef RLIMIT_NOFILE
	{ RLIMIT_NOFILE, 0, 'n', "file descriptors" },
	#endif
	#ifdef RLIMIT_AS
	{ RLIMIT_AS, 10, 'v', "address space (kb)" },
	#endif
	#ifdef RLIMIT_LOCKS
	{ RLIMIT_LOCKS, 0, 'w', "locks" },
	#endif
	};

	enum {
	OPT_hard = (1 << 0),
	OPT_soft = (1 << 1),
	};

	/* "-": treat args as parameters of option with ASCII code 1 */
	static const char ulimit_opt_string[] = "-HSa"
	#ifdef RLIMIT_FSIZE
	"f::"
	#endif
	#ifdef RLIMIT_CPU
	"t::"
	#endif
	#ifdef RLIMIT_DATA
	"d::"
	#endif
	#ifdef RLIMIT_STACK
	"s::"
	#endif
	#ifdef RLIMIT_CORE
	"c::"
	#endif
	#ifdef RLIMIT_RSS
	"m::"
	#endif
	#ifdef RLIMIT_MEMLOCK
	"l::"
	#endif
	#ifdef RLIMIT_NPROC
	"p::"
	#endif
	#ifdef RLIMIT_NOFILE
	"n::"
	#endif
	#ifdef RLIMIT_AS
	"v::"
	#endif
	#ifdef RLIMIT_LOCKS
	"w::"
	#endif
	;

	static void printlim(unsigned opts, const struct rlimit *limit,
	const struct limits *l)
	{
	rlim_t val;

	val = limit->rlim_max;
	if (!(opts & OPT_hard))
	val = limit->rlim_cur;

	if (val == RLIM_INFINITY)
	printf("unlimited\n");
	else {
	val >>= l->factor_shift;
	printf("%llu\n", (long long) val);
	}
	}

	int FAST_FUNC
	shell_builtin_ulimit(char **argv)
	{
	unsigned opts;
	unsigned argc;

	/* We can't use getopt32: need to handle commands like
	* ulimit 123 -c2 -l 456
	*/

	/* In case getopt was already called:
	* reset the libc getopt() function, which keeps internal state.
	*/
	#ifdef __GLIBC__
	optind = 0;
	#else /* BSD style */
	optind = 1;
	/* optreset = 1; */
	#endif
	/* optarg = NULL; opterr = 0; optopt = 0; - do we need this?? */

	argc = 1;
	while (argv[argc])
	argc++;

	opts = 0;
	while (1) {
	struct rlimit limit;
	const struct limits *l;
	int opt_char = getopt(argc, argv, ulimit_opt_string);

	if (opt_char == -1)
	break;
	if (opt_char == 'H') {
	opts \|= OPT_hard;
	continue;
	}
	if (opt_char == 'S') {
	opts \|= OPT_soft;
	continue;
	}

	if (opt_char == 'a') {
	for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) {
	getrlimit(l->cmd, &limit);
	printf("-%c: %-30s ", l->option, l->name);
	printlim(opts, &limit, l);
	}
	continue;
	}

	if (opt_char == 1)
	opt_char = 'f';
	for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) {
	if (opt_char == l->option) {
	char *val_str;

	getrlimit(l->cmd, &limit);

	val_str = optarg;
	if (!val_str && argv[optind] && argv[optind][0] != '-')
	val_str = argv[optind++]; /* ++ skips NN in "-c NN" case */
	if (val_str) {
	rlim_t val;

	if (strcmp(val_str, "unlimited") == 0)
	val = RLIM_INFINITY;
	else {
	if (sizeof(val) == sizeof(int))
	val = bb_strtou(val_str, NULL, 10);
	else if (sizeof(val) == sizeof(long))
	val = bb_strtoul(val_str, NULL, 10);
	else
	val = bb_strtoull(val_str, NULL, 10);
	if (errno) {
	bb_error_msg("bad number");
	return EXIT_FAILURE;
	}
	val <<= l->factor_shift;
	}
	//bb_error_msg("opt %c val_str:'%s' val:%lld", opt_char, val_str, (long long)val);
	/* from man bash: "If neither -H nor -S
	* is specified, both the soft and hard
	* limits are set. */
	if (!opts)
	opts = OPT_hard + OPT_soft;
	if (opts & OPT_hard)
	limit.rlim_max = val;
	if (opts & OPT_soft)
	limit.rlim_cur = val;
	//bb_error_msg("setrlimit(%d, %lld, %lld)", l->cmd, (long long)limit.rlim_cur, (long long)limit.rlim_max);
	if (setrlimit(l->cmd, &limit) < 0) {
	bb_perror_msg("error setting limit");
	return EXIT_FAILURE;
	}
	} else {
	printlim(opts, &limit, l);
	}
	break;
	}
	} /* for (every possible opt) */

	if (l == &limits_tbl[ARRAY_SIZE(limits_tbl)]) {
	/* bad option. getopt already complained. */
	break;
	}

	} /* while (there are options) */

	return 0;
	}