| /* vi: set sw=4 ts=4: */ |
| /* |
| * wget - retrieve a file using HTTP or FTP |
| * |
| * Chip Rosenthal Covad Communications <chip@laserlink.net> |
| * Licensed under GPLv2, see file LICENSE in this source tree. |
| * |
| * Copyright (C) 2010 Bradley M. Kuhn <bkuhn@ebb.org> |
| * Kuhn's copyrights are licensed GPLv2-or-later. File as a whole remains GPLv2. |
| */ |
| |
| //usage:#define wget_trivial_usage |
| //usage: IF_FEATURE_WGET_LONG_OPTIONS( |
| //usage: "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" |
| //usage: " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" |
| /* Since we ignore these opts, we don't show them in --help */ |
| /* //usage: " [--no-check-certificate] [--no-cache]" */ |
| //usage: " [-U|--user-agent AGENT]" IF_FEATURE_WGET_TIMEOUT(" [-T SEC]") " URL..." |
| //usage: ) |
| //usage: IF_NOT_FEATURE_WGET_LONG_OPTIONS( |
| //usage: "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" |
| //usage: IF_FEATURE_WGET_TIMEOUT(" [-T SEC]") " URL..." |
| //usage: ) |
| //usage:#define wget_full_usage "\n\n" |
| //usage: "Retrieve files via HTTP or FTP\n" |
| //usage: "\n -s Spider mode - only check file existence" |
| //usage: "\n -c Continue retrieval of aborted transfer" |
| //usage: "\n -q Quiet" |
| //usage: "\n -P DIR Save to DIR (default .)" |
| //usage: IF_FEATURE_WGET_TIMEOUT( |
| //usage: "\n -T SEC Network read timeout is SEC seconds" |
| //usage: ) |
| //usage: "\n -O FILE Save to FILE ('-' for stdout)" |
| //usage: "\n -U STR Use STR for User-Agent header" |
| //usage: "\n -Y Use proxy ('on' or 'off')" |
| |
| #include "libbb.h" |
| |
| #if 0 |
| # define log_io(...) bb_error_msg(__VA_ARGS__) |
| #else |
| # define log_io(...) ((void)0) |
| #endif |
| |
| |
| struct host_info { |
| char *allocated; |
| const char *path; |
| const char *user; |
| char *host; |
| int port; |
| smallint is_ftp; |
| }; |
| |
| |
| /* Globals */ |
| struct globals { |
| off_t content_len; /* Content-length of the file */ |
| off_t beg_range; /* Range at which continue begins */ |
| #if ENABLE_FEATURE_WGET_STATUSBAR |
| off_t transferred; /* Number of bytes transferred so far */ |
| const char *curfile; /* Name of current file being transferred */ |
| bb_progress_t pmt; |
| #endif |
| char *dir_prefix; |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| char *post_data; |
| char *extra_headers; |
| #endif |
| char *fname_out; /* where to direct output (-O) */ |
| const char *proxy_flag; /* Use proxies if env vars are set */ |
| const char *user_agent; /* "User-Agent" header field */ |
| #if ENABLE_FEATURE_WGET_TIMEOUT |
| unsigned timeout_seconds; |
| #endif |
| int output_fd; |
| int o_flags; |
| smallint chunked; /* chunked transfer encoding */ |
| smallint got_clen; /* got content-length: from server */ |
| /* Local downloads do benefit from big buffer. |
| * With 512 byte buffer, it was measured to be |
| * an order of magnitude slower than with big one. |
| */ |
| uint64_t just_to_align_next_member; |
| char wget_buf[CONFIG_FEATURE_COPYBUF_KB*1024]; |
| } FIX_ALIASING; |
| #define G (*ptr_to_globals) |
| #define INIT_G() do { \ |
| SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ |
| IF_FEATURE_WGET_TIMEOUT(G.timeout_seconds = 900;) \ |
| } while (0) |
| |
| |
| /* Must match option string! */ |
| enum { |
| WGET_OPT_CONTINUE = (1 << 0), |
| WGET_OPT_SPIDER = (1 << 1), |
| WGET_OPT_QUIET = (1 << 2), |
| WGET_OPT_OUTNAME = (1 << 3), |
| WGET_OPT_PREFIX = (1 << 4), |
| WGET_OPT_PROXY = (1 << 5), |
| WGET_OPT_USER_AGENT = (1 << 6), |
| WGET_OPT_NETWORK_READ_TIMEOUT = (1 << 7), |
| WGET_OPT_RETRIES = (1 << 8), |
| WGET_OPT_PASSIVE = (1 << 9), |
| WGET_OPT_HEADER = (1 << 10) * ENABLE_FEATURE_WGET_LONG_OPTIONS, |
| WGET_OPT_POST_DATA = (1 << 11) * ENABLE_FEATURE_WGET_LONG_OPTIONS, |
| }; |
| |
| enum { |
| PROGRESS_START = -1, |
| PROGRESS_END = 0, |
| PROGRESS_BUMP = 1, |
| }; |
| #if ENABLE_FEATURE_WGET_STATUSBAR |
| static void progress_meter(int flag) |
| { |
| if (option_mask32 & WGET_OPT_QUIET) |
| return; |
| |
| if (flag == PROGRESS_START) |
| bb_progress_init(&G.pmt, G.curfile); |
| |
| bb_progress_update(&G.pmt, |
| G.beg_range, |
| G.transferred, |
| (G.chunked || !G.got_clen) ? 0 : G.beg_range + G.transferred + G.content_len |
| ); |
| |
| if (flag == PROGRESS_END) { |
| bb_progress_free(&G.pmt); |
| bb_putchar_stderr('\n'); |
| G.transferred = 0; |
| } |
| } |
| #else |
| static ALWAYS_INLINE void progress_meter(int flag UNUSED_PARAM) { } |
| #endif |
| |
| |
| /* IPv6 knows scoped address types i.e. link and site local addresses. Link |
| * local addresses can have a scope identifier to specify the |
| * interface/link an address is valid on (e.g. fe80::1%eth0). This scope |
| * identifier is only valid on a single node. |
| * |
| * RFC 4007 says that the scope identifier MUST NOT be sent across the wire, |
| * unless all nodes agree on the semantic. Apache e.g. regards zone identifiers |
| * in the Host header as invalid requests, see |
| * https://issues.apache.org/bugzilla/show_bug.cgi?id=35122 |
| */ |
| static void strip_ipv6_scope_id(char *host) |
| { |
| char *scope, *cp; |
| |
| /* bbox wget actually handles IPv6 addresses without [], like |
| * wget "http://::1/xxx", but this is not standard. |
| * To save code, _here_ we do not support it. */ |
| |
| if (host[0] != '[') |
| return; /* not IPv6 */ |
| |
| scope = strchr(host, '%'); |
| if (!scope) |
| return; |
| |
| /* Remove the IPv6 zone identifier from the host address */ |
| cp = strchr(host, ']'); |
| if (!cp || (cp[1] != ':' && cp[1] != '\0')) { |
| /* malformed address (not "[xx]:nn" or "[xx]") */ |
| return; |
| } |
| |
| /* cp points to "]...", scope points to "%eth0]..." */ |
| overlapping_strcpy(scope, cp); |
| } |
| |
| #if ENABLE_FEATURE_WGET_AUTHENTICATION |
| /* Base64-encode character string. */ |
| static char *base64enc(const char *str) |
| { |
| unsigned len = strlen(str); |
| if (len > sizeof(G.wget_buf)/4*3 - 10) /* paranoia */ |
| len = sizeof(G.wget_buf)/4*3 - 10; |
| bb_uuencode(G.wget_buf, str, len, bb_uuenc_tbl_base64); |
| return G.wget_buf; |
| } |
| #endif |
| |
| static char* sanitize_string(char *s) |
| { |
| unsigned char *p = (void *) s; |
| while (*p >= ' ') |
| p++; |
| *p = '\0'; |
| return s; |
| } |
| |
| static FILE *open_socket(len_and_sockaddr *lsa) |
| { |
| FILE *fp; |
| |
| /* glibc 2.4 seems to try seeking on it - ??! */ |
| /* hopefully it understands what ESPIPE means... */ |
| fp = fdopen(xconnect_stream(lsa), "r+"); |
| if (fp == NULL) |
| bb_perror_msg_and_die(bb_msg_memory_exhausted); |
| |
| return fp; |
| } |
| |
| /* Returns '\n' if it was seen, else '\0'. Trims at first '\r' or '\n' */ |
| static char fgets_and_trim(FILE *fp) |
| { |
| char c; |
| char *buf_ptr; |
| |
| if (fgets(G.wget_buf, sizeof(G.wget_buf) - 1, fp) == NULL) |
| bb_perror_msg_and_die("error getting response"); |
| |
| buf_ptr = strchrnul(G.wget_buf, '\n'); |
| c = *buf_ptr; |
| *buf_ptr = '\0'; |
| buf_ptr = strchrnul(G.wget_buf, '\r'); |
| *buf_ptr = '\0'; |
| |
| log_io("< %s", G.wget_buf); |
| |
| return c; |
| } |
| |
| static int ftpcmd(const char *s1, const char *s2, FILE *fp) |
| { |
| int result; |
| if (s1) { |
| if (!s2) |
| s2 = ""; |
| fprintf(fp, "%s%s\r\n", s1, s2); |
| fflush(fp); |
| log_io("> %s%s", s1, s2); |
| } |
| |
| do { |
| fgets_and_trim(fp); |
| } while (!isdigit(G.wget_buf[0]) || G.wget_buf[3] != ' '); |
| |
| G.wget_buf[3] = '\0'; |
| result = xatoi_positive(G.wget_buf); |
| G.wget_buf[3] = ' '; |
| return result; |
| } |
| |
| static void parse_url(const char *src_url, struct host_info *h) |
| { |
| char *url, *p, *sp; |
| |
| free(h->allocated); |
| h->allocated = url = xstrdup(src_url); |
| |
| if (strncmp(url, "http://", 7) == 0) { |
| h->port = bb_lookup_port("http", "tcp", 80); |
| h->host = url + 7; |
| h->is_ftp = 0; |
| } else if (strncmp(url, "ftp://", 6) == 0) { |
| h->port = bb_lookup_port("ftp", "tcp", 21); |
| h->host = url + 6; |
| h->is_ftp = 1; |
| } else |
| bb_error_msg_and_die("not an http or ftp url: %s", sanitize_string(url)); |
| |
| // FYI: |
| // "Real" wget 'http://busybox.net?var=a/b' sends this request: |
| // 'GET /?var=a/b HTTP 1.0' |
| // and saves 'index.html?var=a%2Fb' (we save 'b') |
| // wget 'http://busybox.net?login=john@doe': |
| // request: 'GET /?login=john@doe HTTP/1.0' |
| // saves: 'index.html?login=john@doe' (we save '?login=john@doe') |
| // wget 'http://busybox.net#test/test': |
| // request: 'GET / HTTP/1.0' |
| // saves: 'index.html' (we save 'test') |
| // |
| // We also don't add unique .N suffix if file exists... |
| sp = strchr(h->host, '/'); |
| p = strchr(h->host, '?'); if (!sp || (p && sp > p)) sp = p; |
| p = strchr(h->host, '#'); if (!sp || (p && sp > p)) sp = p; |
| if (!sp) { |
| h->path = ""; |
| } else if (*sp == '/') { |
| *sp = '\0'; |
| h->path = sp + 1; |
| } else { // '#' or '?' |
| // http://busybox.net?login=john@doe is a valid URL |
| // memmove converts to: |
| // http:/busybox.nett?login=john@doe... |
| memmove(h->host - 1, h->host, sp - h->host); |
| h->host--; |
| sp[-1] = '\0'; |
| h->path = sp; |
| } |
| |
| // We used to set h->user to NULL here, but this interferes |
| // with handling of code 302 ("object was moved") |
| |
| sp = strrchr(h->host, '@'); |
| if (sp != NULL) { |
| // URL-decode "user:password" string before base64-encoding: |
| // wget http://test:my%20pass@example.com should send |
| // Authorization: Basic dGVzdDpteSBwYXNz |
| // which decodes to "test:my pass". |
| // Standard wget and curl do this too. |
| *sp = '\0'; |
| h->user = percent_decode_in_place(h->host, /*strict:*/ 0); |
| h->host = sp + 1; |
| } |
| |
| sp = h->host; |
| } |
| |
| static char *gethdr(FILE *fp) |
| { |
| char *s, *hdrval; |
| int c; |
| |
| /* retrieve header line */ |
| c = fgets_and_trim(fp); |
| |
| /* end of the headers? */ |
| if (G.wget_buf[0] == '\0') |
| return NULL; |
| |
| /* convert the header name to lower case */ |
| for (s = G.wget_buf; isalnum(*s) || *s == '-' || *s == '.'; ++s) { |
| /* tolower for "A-Z", no-op for "0-9a-z-." */ |
| *s |= 0x20; |
| } |
| |
| /* verify we are at the end of the header name */ |
| if (*s != ':') |
| bb_error_msg_and_die("bad header line: %s", sanitize_string(G.wget_buf)); |
| |
| /* locate the start of the header value */ |
| *s++ = '\0'; |
| hdrval = skip_whitespace(s); |
| |
| if (c != '\n') { |
| /* Rats! The buffer isn't big enough to hold the entire header value */ |
| while (c = getc(fp), c != EOF && c != '\n') |
| continue; |
| } |
| |
| return hdrval; |
| } |
| |
| static void reset_beg_range_to_zero(void) |
| { |
| bb_error_msg("restart failed"); |
| G.beg_range = 0; |
| xlseek(G.output_fd, 0, SEEK_SET); |
| /* Done at the end instead: */ |
| /* ftruncate(G.output_fd, 0); */ |
| } |
| |
| static FILE* prepare_ftp_session(FILE **dfpp, struct host_info *target, len_and_sockaddr *lsa) |
| { |
| FILE *sfp; |
| char *str; |
| int port; |
| |
| if (!target->user) |
| target->user = xstrdup("anonymous:busybox@"); |
| |
| sfp = open_socket(lsa); |
| if (ftpcmd(NULL, NULL, sfp) != 220) |
| bb_error_msg_and_die("%s", sanitize_string(G.wget_buf + 4)); |
| |
| /* |
| * Splitting username:password pair, |
| * trying to log in |
| */ |
| str = strchr(target->user, ':'); |
| if (str) |
| *str++ = '\0'; |
| switch (ftpcmd("USER ", target->user, sfp)) { |
| case 230: |
| break; |
| case 331: |
| if (ftpcmd("PASS ", str, sfp) == 230) |
| break; |
| /* fall through (failed login) */ |
| default: |
| bb_error_msg_and_die("ftp login: %s", sanitize_string(G.wget_buf + 4)); |
| } |
| |
| ftpcmd("TYPE I", NULL, sfp); |
| |
| /* |
| * Querying file size |
| */ |
| if (ftpcmd("SIZE ", target->path, sfp) == 213) { |
| G.content_len = BB_STRTOOFF(G.wget_buf + 4, NULL, 10); |
| if (G.content_len < 0 || errno) { |
| bb_error_msg_and_die("SIZE value is garbage"); |
| } |
| G.got_clen = 1; |
| } |
| |
| /* |
| * Entering passive mode |
| */ |
| if (ftpcmd("PASV", NULL, sfp) != 227) { |
| pasv_error: |
| bb_error_msg_and_die("bad response to %s: %s", "PASV", sanitize_string(G.wget_buf)); |
| } |
| // Response is "227 garbageN1,N2,N3,N4,P1,P2[)garbage] |
| // Server's IP is N1.N2.N3.N4 (we ignore it) |
| // Server's port for data connection is P1*256+P2 |
| str = strrchr(G.wget_buf, ')'); |
| if (str) str[0] = '\0'; |
| str = strrchr(G.wget_buf, ','); |
| if (!str) goto pasv_error; |
| port = xatou_range(str+1, 0, 255); |
| *str = '\0'; |
| str = strrchr(G.wget_buf, ','); |
| if (!str) goto pasv_error; |
| port += xatou_range(str+1, 0, 255) * 256; |
| set_nport(&lsa->u.sa, htons(port)); |
| |
| *dfpp = open_socket(lsa); |
| |
| if (G.beg_range != 0) { |
| sprintf(G.wget_buf, "REST %"OFF_FMT"u", G.beg_range); |
| if (ftpcmd(G.wget_buf, NULL, sfp) == 350) |
| G.content_len -= G.beg_range; |
| else |
| reset_beg_range_to_zero(); |
| } |
| |
| if (ftpcmd("RETR ", target->path, sfp) > 150) |
| bb_error_msg_and_die("bad response to %s: %s", "RETR", sanitize_string(G.wget_buf)); |
| |
| return sfp; |
| } |
| |
| static void NOINLINE retrieve_file_data(FILE *dfp) |
| { |
| #if ENABLE_FEATURE_WGET_STATUSBAR || ENABLE_FEATURE_WGET_TIMEOUT |
| # if ENABLE_FEATURE_WGET_TIMEOUT |
| unsigned second_cnt = G.timeout_seconds; |
| # endif |
| struct pollfd polldata; |
| |
| polldata.fd = fileno(dfp); |
| polldata.events = POLLIN | POLLPRI; |
| #endif |
| progress_meter(PROGRESS_START); |
| |
| if (G.chunked) |
| goto get_clen; |
| |
| /* Loops only if chunked */ |
| while (1) { |
| |
| #if ENABLE_FEATURE_WGET_STATUSBAR || ENABLE_FEATURE_WGET_TIMEOUT |
| /* Must use nonblocking I/O, otherwise fread will loop |
| * and *block* until it reads full buffer, |
| * which messes up progress bar and/or timeout logic. |
| * Because of nonblocking I/O, we need to dance |
| * very carefully around EAGAIN. See explanation at |
| * clearerr() calls. |
| */ |
| ndelay_on(polldata.fd); |
| #endif |
| while (1) { |
| int n; |
| unsigned rdsz; |
| |
| #if ENABLE_FEATURE_WGET_STATUSBAR || ENABLE_FEATURE_WGET_TIMEOUT |
| /* fread internally uses read loop, which in our case |
| * is usually exited when we get EAGAIN. |
| * In this case, libc sets error marker on the stream. |
| * Need to clear it before next fread to avoid possible |
| * rare false positive ferror below. Rare because usually |
| * fread gets more than zero bytes, and we don't fall |
| * into if (n <= 0) ... |
| */ |
| clearerr(dfp); |
| #endif |
| errno = 0; |
| rdsz = sizeof(G.wget_buf); |
| if (G.got_clen) { |
| if (G.content_len < (off_t)sizeof(G.wget_buf)) { |
| if ((int)G.content_len <= 0) |
| break; |
| rdsz = (unsigned)G.content_len; |
| } |
| } |
| n = fread(G.wget_buf, 1, rdsz, dfp); |
| |
| if (n > 0) { |
| xwrite(G.output_fd, G.wget_buf, n); |
| #if ENABLE_FEATURE_WGET_STATUSBAR |
| G.transferred += n; |
| #endif |
| if (G.got_clen) { |
| G.content_len -= n; |
| if (G.content_len == 0) |
| break; |
| } |
| #if ENABLE_FEATURE_WGET_TIMEOUT |
| second_cnt = G.timeout_seconds; |
| #endif |
| continue; |
| } |
| |
| /* n <= 0. |
| * man fread: |
| * If error occurs, or EOF is reached, the return value |
| * is a short item count (or zero). |
| * fread does not distinguish between EOF and error. |
| */ |
| if (errno != EAGAIN) { |
| if (ferror(dfp)) { |
| progress_meter(PROGRESS_END); |
| bb_perror_msg_and_die(bb_msg_read_error); |
| } |
| break; /* EOF, not error */ |
| } |
| |
| #if ENABLE_FEATURE_WGET_STATUSBAR || ENABLE_FEATURE_WGET_TIMEOUT |
| /* It was EAGAIN. There is no data. Wait up to one second |
| * then abort if timed out, or update the bar and try reading again. |
| */ |
| if (safe_poll(&polldata, 1, 1000) == 0) { |
| # if ENABLE_FEATURE_WGET_TIMEOUT |
| if (second_cnt != 0 && --second_cnt == 0) { |
| progress_meter(PROGRESS_END); |
| bb_error_msg_and_die("download timed out"); |
| } |
| # endif |
| /* We used to loop back to poll here, |
| * but there is no great harm in letting fread |
| * to try reading anyway. |
| */ |
| } |
| /* Need to do it _every_ second for "stalled" indicator |
| * to be shown properly. |
| */ |
| progress_meter(PROGRESS_BUMP); |
| #endif |
| } /* while (reading data) */ |
| |
| #if ENABLE_FEATURE_WGET_STATUSBAR || ENABLE_FEATURE_WGET_TIMEOUT |
| clearerr(dfp); |
| ndelay_off(polldata.fd); /* else fgets can get very unhappy */ |
| #endif |
| if (!G.chunked) |
| break; |
| |
| fgets_and_trim(dfp); /* Eat empty line */ |
| get_clen: |
| fgets_and_trim(dfp); |
| G.content_len = STRTOOFF(G.wget_buf, NULL, 16); |
| /* FIXME: error check? */ |
| if (G.content_len == 0) |
| break; /* all done! */ |
| G.got_clen = 1; |
| /* |
| * Note that fgets may result in some data being buffered in dfp. |
| * We loop back to fread, which will retrieve this data. |
| * Also note that code has to be arranged so that fread |
| * is done _before_ one-second poll wait - poll doesn't know |
| * about stdio buffering and can result in spurious one second waits! |
| */ |
| } |
| |
| /* If -c failed, we restart from the beginning, |
| * but we do not truncate file then, we do it only now, at the end. |
| * This lets user to ^C if his 99% complete 10 GB file download |
| * failed to restart *without* losing the almost complete file. |
| */ |
| { |
| off_t pos = lseek(G.output_fd, 0, SEEK_CUR); |
| if (pos != (off_t)-1) |
| ftruncate(G.output_fd, pos); |
| } |
| |
| /* Draw full bar and free its resources */ |
| G.chunked = 0; /* makes it show 100% even for chunked download */ |
| G.got_clen = 1; /* makes it show 100% even for download of (formerly) unknown size */ |
| progress_meter(PROGRESS_END); |
| } |
| |
| static void download_one_url(const char *url) |
| { |
| bool use_proxy; /* Use proxies if env vars are set */ |
| int redir_limit; |
| len_and_sockaddr *lsa; |
| FILE *sfp; /* socket to web/ftp server */ |
| FILE *dfp; /* socket to ftp server (data) */ |
| char *proxy = NULL; |
| char *fname_out_alloc; |
| char *redirected_path = NULL; |
| struct host_info server; |
| struct host_info target; |
| |
| server.allocated = NULL; |
| target.allocated = NULL; |
| server.user = NULL; |
| target.user = NULL; |
| |
| parse_url(url, &target); |
| |
| /* Use the proxy if necessary */ |
| use_proxy = (strcmp(G.proxy_flag, "off") != 0); |
| if (use_proxy) { |
| proxy = getenv(target.is_ftp ? "ftp_proxy" : "http_proxy"); |
| use_proxy = (proxy && proxy[0]); |
| if (use_proxy) |
| parse_url(proxy, &server); |
| } |
| if (!use_proxy) { |
| server.port = target.port; |
| if (ENABLE_FEATURE_IPV6) { |
| //free(server.allocated); - can't be non-NULL |
| server.host = server.allocated = xstrdup(target.host); |
| } else { |
| server.host = target.host; |
| } |
| } |
| |
| if (ENABLE_FEATURE_IPV6) |
| strip_ipv6_scope_id(target.host); |
| |
| /* If there was no -O FILE, guess output filename */ |
| fname_out_alloc = NULL; |
| if (!(option_mask32 & WGET_OPT_OUTNAME)) { |
| G.fname_out = bb_get_last_path_component_nostrip(target.path); |
| /* handle "wget http://kernel.org//" */ |
| if (G.fname_out[0] == '/' || !G.fname_out[0]) |
| G.fname_out = (char*)"index.html"; |
| /* -P DIR is considered only if there was no -O FILE */ |
| if (G.dir_prefix) |
| G.fname_out = fname_out_alloc = concat_path_file(G.dir_prefix, G.fname_out); |
| else { |
| /* redirects may free target.path later, need to make a copy */ |
| G.fname_out = fname_out_alloc = xstrdup(G.fname_out); |
| } |
| } |
| #if ENABLE_FEATURE_WGET_STATUSBAR |
| G.curfile = bb_get_last_path_component_nostrip(G.fname_out); |
| #endif |
| |
| /* Determine where to start transfer */ |
| G.beg_range = 0; |
| if (option_mask32 & WGET_OPT_CONTINUE) { |
| G.output_fd = open(G.fname_out, O_WRONLY); |
| if (G.output_fd >= 0) { |
| G.beg_range = xlseek(G.output_fd, 0, SEEK_END); |
| } |
| /* File doesn't exist. We do not create file here yet. |
| * We are not sure it exists on remote side */ |
| } |
| |
| redir_limit = 5; |
| resolve_lsa: |
| lsa = xhost2sockaddr(server.host, server.port); |
| if (!(option_mask32 & WGET_OPT_QUIET)) { |
| char *s = xmalloc_sockaddr2dotted(&lsa->u.sa); |
| fprintf(stderr, "Connecting to %s (%s)\n", server.host, s); |
| free(s); |
| } |
| establish_session: |
| /*G.content_len = 0; - redundant, got_clen = 0 is enough */ |
| G.got_clen = 0; |
| G.chunked = 0; |
| if (use_proxy || !target.is_ftp) { |
| /* |
| * HTTP session |
| */ |
| char *str; |
| int status; |
| |
| |
| /* Open socket to http server */ |
| sfp = open_socket(lsa); |
| |
| /* Send HTTP request */ |
| if (use_proxy) { |
| fprintf(sfp, "GET %stp://%s/%s HTTP/1.1\r\n", |
| target.is_ftp ? "f" : "ht", target.host, |
| target.path); |
| } else { |
| if (option_mask32 & WGET_OPT_POST_DATA) |
| fprintf(sfp, "POST /%s HTTP/1.1\r\n", target.path); |
| else |
| fprintf(sfp, "GET /%s HTTP/1.1\r\n", target.path); |
| } |
| |
| fprintf(sfp, "Host: %s\r\nUser-Agent: %s\r\n", |
| target.host, G.user_agent); |
| |
| /* Ask server to close the connection as soon as we are done |
| * (IOW: we do not intend to send more requests) |
| */ |
| fprintf(sfp, "Connection: close\r\n"); |
| |
| #if ENABLE_FEATURE_WGET_AUTHENTICATION |
| if (target.user) { |
| fprintf(sfp, "Proxy-Authorization: Basic %s\r\n"+6, |
| base64enc(target.user)); |
| } |
| if (use_proxy && server.user) { |
| fprintf(sfp, "Proxy-Authorization: Basic %s\r\n", |
| base64enc(server.user)); |
| } |
| #endif |
| |
| if (G.beg_range != 0) |
| fprintf(sfp, "Range: bytes=%"OFF_FMT"u-\r\n", G.beg_range); |
| |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| if (G.extra_headers) |
| fputs(G.extra_headers, sfp); |
| |
| if (option_mask32 & WGET_OPT_POST_DATA) { |
| fprintf(sfp, |
| "Content-Type: application/x-www-form-urlencoded\r\n" |
| "Content-Length: %u\r\n" |
| "\r\n" |
| "%s", |
| (int) strlen(G.post_data), G.post_data |
| ); |
| } else |
| #endif |
| { |
| fprintf(sfp, "\r\n"); |
| } |
| |
| fflush(sfp); |
| |
| /* |
| * Retrieve HTTP response line and check for "200" status code. |
| */ |
| read_response: |
| fgets_and_trim(sfp); |
| |
| str = G.wget_buf; |
| str = skip_non_whitespace(str); |
| str = skip_whitespace(str); |
| // FIXME: no error check |
| // xatou wouldn't work: "200 OK" |
| status = atoi(str); |
| switch (status) { |
| case 0: |
| case 100: |
| while (gethdr(sfp) != NULL) |
| /* eat all remaining headers */; |
| goto read_response; |
| case 200: |
| /* |
| Response 204 doesn't say "null file", it says "metadata |
| has changed but data didn't": |
| |
| "10.2.5 204 No Content |
| The server has fulfilled the request but does not need to return |
| an entity-body, and might want to return updated metainformation. |
| The response MAY include new or updated metainformation in the form |
| of entity-headers, which if present SHOULD be associated with |
| the requested variant. |
| |
| If the client is a user agent, it SHOULD NOT change its document |
| view from that which caused the request to be sent. This response |
| is primarily intended to allow input for actions to take place |
| without causing a change to the user agent's active document view, |
| although any new or updated metainformation SHOULD be applied |
| to the document currently in the user agent's active view. |
| |
| The 204 response MUST NOT include a message-body, and thus |
| is always terminated by the first empty line after the header fields." |
| |
| However, in real world it was observed that some web servers |
| (e.g. Boa/0.94.14rc21) simply use code 204 when file size is zero. |
| */ |
| case 204: |
| if (G.beg_range != 0) { |
| /* "Range:..." was not honored by the server. |
| * Restart download from the beginning. |
| */ |
| reset_beg_range_to_zero(); |
| } |
| break; |
| case 300: /* redirection */ |
| case 301: |
| case 302: |
| case 303: |
| break; |
| case 206: /* Partial Content */ |
| if (G.beg_range != 0) |
| /* "Range:..." worked. Good. */ |
| break; |
| /* Partial Content even though we did not ask for it??? */ |
| /* fall through */ |
| default: |
| bb_error_msg_and_die("server returned error: %s", sanitize_string(G.wget_buf)); |
| } |
| |
| /* |
| * Retrieve HTTP headers. |
| */ |
| while ((str = gethdr(sfp)) != NULL) { |
| static const char keywords[] ALIGN1 = |
| "content-length\0""transfer-encoding\0""location\0"; |
| enum { |
| KEY_content_length = 1, KEY_transfer_encoding, KEY_location |
| }; |
| smalluint key; |
| |
| /* gethdr converted "FOO:" string to lowercase */ |
| |
| /* strip trailing whitespace */ |
| char *s = strchrnul(str, '\0') - 1; |
| while (s >= str && (*s == ' ' || *s == '\t')) { |
| *s = '\0'; |
| s--; |
| } |
| key = index_in_strings(keywords, G.wget_buf) + 1; |
| if (key == KEY_content_length) { |
| G.content_len = BB_STRTOOFF(str, NULL, 10); |
| if (G.content_len < 0 || errno) { |
| bb_error_msg_and_die("content-length %s is garbage", sanitize_string(str)); |
| } |
| G.got_clen = 1; |
| continue; |
| } |
| if (key == KEY_transfer_encoding) { |
| if (strcmp(str_tolower(str), "chunked") != 0) |
| bb_error_msg_and_die("transfer encoding '%s' is not supported", sanitize_string(str)); |
| G.chunked = 1; |
| } |
| if (key == KEY_location && status >= 300) { |
| if (--redir_limit == 0) |
| bb_error_msg_and_die("too many redirections"); |
| fclose(sfp); |
| if (str[0] == '/') { |
| free(redirected_path); |
| target.path = redirected_path = xstrdup(str+1); |
| /* lsa stays the same: it's on the same server */ |
| } else { |
| parse_url(str, &target); |
| if (!use_proxy) { |
| free(server.allocated); |
| server.allocated = NULL; |
| server.host = target.host; |
| /* strip_ipv6_scope_id(target.host); - no! */ |
| /* we assume remote never gives us IPv6 addr with scope id */ |
| server.port = target.port; |
| free(lsa); |
| goto resolve_lsa; |
| } /* else: lsa stays the same: we use proxy */ |
| } |
| goto establish_session; |
| } |
| } |
| // if (status >= 300) |
| // bb_error_msg_and_die("bad redirection (no Location: header from server)"); |
| |
| /* For HTTP, data is pumped over the same connection */ |
| dfp = sfp; |
| |
| } else { |
| /* |
| * FTP session |
| */ |
| sfp = prepare_ftp_session(&dfp, &target, lsa); |
| } |
| |
| free(lsa); |
| |
| if (!(option_mask32 & WGET_OPT_SPIDER)) { |
| if (G.output_fd < 0) |
| G.output_fd = xopen(G.fname_out, G.o_flags); |
| retrieve_file_data(dfp); |
| if (!(option_mask32 & WGET_OPT_OUTNAME)) { |
| xclose(G.output_fd); |
| G.output_fd = -1; |
| } |
| } |
| |
| if (dfp != sfp) { |
| /* It's ftp. Close data connection properly */ |
| fclose(dfp); |
| if (ftpcmd(NULL, NULL, sfp) != 226) |
| bb_error_msg_and_die("ftp error: %s", sanitize_string(G.wget_buf + 4)); |
| /* ftpcmd("QUIT", NULL, sfp); - why bother? */ |
| } |
| fclose(sfp); |
| |
| free(server.allocated); |
| free(target.allocated); |
| free(fname_out_alloc); |
| free(redirected_path); |
| } |
| |
| int wget_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int wget_main(int argc UNUSED_PARAM, char **argv) |
| { |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| static const char wget_longopts[] ALIGN1 = |
| /* name, has_arg, val */ |
| "continue\0" No_argument "c" |
| //FIXME: -s isn't --spider, it's --save-headers! |
| "spider\0" No_argument "s" |
| "quiet\0" No_argument "q" |
| "output-document\0" Required_argument "O" |
| "directory-prefix\0" Required_argument "P" |
| "proxy\0" Required_argument "Y" |
| "user-agent\0" Required_argument "U" |
| #if ENABLE_FEATURE_WGET_TIMEOUT |
| "timeout\0" Required_argument "T" |
| #endif |
| /* Ignored: */ |
| // "tries\0" Required_argument "t" |
| /* Ignored (we always use PASV): */ |
| "passive-ftp\0" No_argument "\xff" |
| "header\0" Required_argument "\xfe" |
| "post-data\0" Required_argument "\xfd" |
| /* Ignored (we don't do ssl) */ |
| "no-check-certificate\0" No_argument "\xfc" |
| /* Ignored (we don't support caching) */ |
| "no-cache\0" No_argument "\xfb" |
| ; |
| #endif |
| |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| llist_t *headers_llist = NULL; |
| #endif |
| |
| INIT_G(); |
| |
| IF_FEATURE_WGET_TIMEOUT(G.timeout_seconds = 900;) |
| G.proxy_flag = "on"; /* use proxies if env vars are set */ |
| G.user_agent = "Wget"; /* "User-Agent" header field */ |
| |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| applet_long_options = wget_longopts; |
| #endif |
| opt_complementary = "-1" IF_FEATURE_WGET_TIMEOUT(":T+") IF_FEATURE_WGET_LONG_OPTIONS(":\xfe::"); |
| getopt32(argv, "csqO:P:Y:U:T:" /*ignored:*/ "t:", |
| &G.fname_out, &G.dir_prefix, |
| &G.proxy_flag, &G.user_agent, |
| IF_FEATURE_WGET_TIMEOUT(&G.timeout_seconds) IF_NOT_FEATURE_WGET_TIMEOUT(NULL), |
| NULL /* -t RETRIES */ |
| IF_FEATURE_WGET_LONG_OPTIONS(, &headers_llist) |
| IF_FEATURE_WGET_LONG_OPTIONS(, &G.post_data) |
| ); |
| argv += optind; |
| |
| #if ENABLE_FEATURE_WGET_LONG_OPTIONS |
| if (headers_llist) { |
| int size = 1; |
| char *cp; |
| llist_t *ll = headers_llist; |
| while (ll) { |
| size += strlen(ll->data) + 2; |
| ll = ll->link; |
| } |
| G.extra_headers = cp = xmalloc(size); |
| while (headers_llist) { |
| cp += sprintf(cp, "%s\r\n", (char*)llist_pop(&headers_llist)); |
| } |
| } |
| #endif |
| |
| G.output_fd = -1; |
| G.o_flags = O_WRONLY | O_CREAT | O_TRUNC | O_EXCL; |
| if (G.fname_out) { /* -O FILE ? */ |
| if (LONE_DASH(G.fname_out)) { /* -O - ? */ |
| G.output_fd = 1; |
| option_mask32 &= ~WGET_OPT_CONTINUE; |
| } |
| /* compat with wget: -O FILE can overwrite */ |
| G.o_flags = O_WRONLY | O_CREAT | O_TRUNC; |
| } |
| |
| while (*argv) |
| download_one_url(*argv++); |
| |
| if (G.output_fd >= 0) |
| xclose(G.output_fd); |
| |
| return EXIT_SUCCESS; |
| } |