| /* |
| ** Licensed under the GPL v2, see the file LICENSE in this tarball |
| ** |
| ** Based on nanotop.c from floppyfw project |
| ** |
| ** Contact me: vda.linux@googlemail.com */ |
| |
| //TODO: |
| // simplify code |
| // /proc/locks |
| // /proc/stat: |
| // disk_io: (3,0):(22272,17897,410702,4375,54750) |
| // btime 1059401962 |
| //TODO: use sysinfo libc call/syscall, if appropriate |
| // (faster than open/read/close): |
| // sysinfo({uptime=15017, loads=[5728, 15040, 16480] |
| // totalram=2107416576, freeram=211525632, sharedram=0, bufferram=157204480} |
| // totalswap=134209536, freeswap=134209536, procs=157}) |
| |
| #include <time.h> |
| #include "libbb.h" |
| |
| typedef unsigned long long ullong; |
| |
| enum { PROC_FILE_SIZE = 4096 }; |
| |
| typedef struct proc_file { |
| char *file; |
| //const char *name; |
| smallint last_gen; |
| } proc_file; |
| |
| static const char *const proc_name[] = { |
| "stat", // Must match the order of proc_file's! |
| "loadavg", |
| "net/dev", |
| "meminfo", |
| "diskstats", |
| "sys/fs/file-nr" |
| }; |
| |
| struct globals { |
| // Sample generation flip-flop |
| smallint gen; |
| // Linux 2.6? (otherwise assumes 2.4) |
| smallint is26; |
| // 1 if sample delay is not an integer fraction of a second |
| smallint need_seconds; |
| char *cur_outbuf; |
| const char *final_str; |
| int delta; |
| int deltanz; |
| struct timeval tv; |
| #define first_proc_file proc_stat |
| proc_file proc_stat; // Must match the order of proc_name's! |
| proc_file proc_loadavg; |
| proc_file proc_net_dev; |
| proc_file proc_meminfo; |
| proc_file proc_diskstats; |
| proc_file proc_sys_fs_filenr; |
| }; |
| #define G (*ptr_to_globals) |
| #define gen (G.gen ) |
| #define is26 (G.is26 ) |
| #define need_seconds (G.need_seconds ) |
| #define cur_outbuf (G.cur_outbuf ) |
| #define final_str (G.final_str ) |
| #define delta (G.delta ) |
| #define deltanz (G.deltanz ) |
| #define tv (G.tv ) |
| #define proc_stat (G.proc_stat ) |
| #define proc_loadavg (G.proc_loadavg ) |
| #define proc_net_dev (G.proc_net_dev ) |
| #define proc_meminfo (G.proc_meminfo ) |
| #define proc_diskstats (G.proc_diskstats ) |
| #define proc_sys_fs_filenr (G.proc_sys_fs_filenr) |
| #define INIT_G() do { \ |
| SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ |
| cur_outbuf = outbuf; \ |
| final_str = "\n"; \ |
| deltanz = delta = 1000000; \ |
| } while (0) |
| |
| // We depend on this being a char[], not char* - we take sizeof() of it |
| #define outbuf bb_common_bufsiz1 |
| |
| static inline void reset_outbuf(void) |
| { |
| cur_outbuf = outbuf; |
| } |
| |
| static inline int outbuf_count(void) |
| { |
| return cur_outbuf - outbuf; |
| } |
| |
| static void print_outbuf(void) |
| { |
| int sz = cur_outbuf - outbuf; |
| if (sz > 0) { |
| xwrite(STDOUT_FILENO, outbuf, sz); |
| cur_outbuf = outbuf; |
| } |
| } |
| |
| static void put(const char *s) |
| { |
| int sz = strlen(s); |
| if (sz > outbuf + sizeof(outbuf) - cur_outbuf) |
| sz = outbuf + sizeof(outbuf) - cur_outbuf; |
| memcpy(cur_outbuf, s, sz); |
| cur_outbuf += sz; |
| } |
| |
| static void put_c(char c) |
| { |
| if (cur_outbuf < outbuf + sizeof(outbuf)) |
| *cur_outbuf++ = c; |
| } |
| |
| static void put_question_marks(int count) |
| { |
| while (count--) |
| put_c('?'); |
| } |
| |
| static void readfile_z(char *buf, int sz, const char* fname) |
| { |
| // open_read_close() will do two reads in order to be sure we are at EOF, |
| // and we don't need/want that. |
| // sz = open_read_close(fname, buf, sz-1); |
| |
| int fd = xopen(fname, O_RDONLY); |
| buf[0] = '\0'; |
| if (fd >= 0) { |
| sz = read(fd, buf, sz-1); |
| if (sz > 0) buf[sz] = '\0'; |
| close(fd); |
| } |
| } |
| |
| static const char* get_file(proc_file *pf) |
| { |
| if (pf->last_gen != gen) { |
| pf->last_gen = gen; |
| // We allocate PROC_FILE_SIZE bytes. This wastes memory, |
| // but allows us to allocate only once (at first sample) |
| // per proc file, and reuse buffer for each sample |
| if (!pf->file) |
| pf->file = xmalloc(PROC_FILE_SIZE); |
| readfile_z(pf->file, PROC_FILE_SIZE, proc_name[pf - &first_proc_file]); |
| } |
| return pf->file; |
| } |
| |
| static inline ullong read_after_slash(const char *p) |
| { |
| p = strchr(p, '/'); |
| if (!p) return 0; |
| return strtoull(p+1, NULL, 10); |
| } |
| |
| enum conv_type { conv_decimal, conv_slash }; |
| |
| // Reads decimal values from line. Values start after key, for example: |
| // "cpu 649369 0 341297 4336769..." - key is "cpu" here. |
| // Values are stored in vec[]. arg_ptr has list of positions |
| // we are interested in: for example: 1,2,5 - we want 1st, 2nd and 5th value. |
| static int vrdval(const char* p, const char* key, |
| enum conv_type conv, ullong *vec, va_list arg_ptr) |
| { |
| int indexline; |
| int indexnext; |
| |
| p = strstr(p, key); |
| if (!p) return 1; |
| |
| p += strlen(key); |
| indexline = 1; |
| indexnext = va_arg(arg_ptr, int); |
| while (1) { |
| while (*p == ' ' || *p == '\t') p++; |
| if (*p == '\n' || *p == '\0') break; |
| |
| if (indexline == indexnext) { // read this value |
| *vec++ = conv==conv_decimal ? |
| strtoull(p, NULL, 10) : |
| read_after_slash(p); |
| indexnext = va_arg(arg_ptr, int); |
| } |
| while (*p > ' ') p++; // skip over value |
| indexline++; |
| } |
| return 0; |
| } |
| |
| // Parses files with lines like "cpu0 21727 0 15718 1813856 9461 10485 0 0": |
| // rdval(file_contents, "string_to_find", result_vector, value#, value#...) |
| // value# start with 1 |
| static int rdval(const char* p, const char* key, ullong *vec, ...) |
| { |
| va_list arg_ptr; |
| int result; |
| |
| va_start(arg_ptr, vec); |
| result = vrdval(p, key, conv_decimal, vec, arg_ptr); |
| va_end(arg_ptr); |
| |
| return result; |
| } |
| |
| // Parses files with lines like "... ... ... 3/148 ...." |
| static int rdval_loadavg(const char* p, ullong *vec, ...) |
| { |
| va_list arg_ptr; |
| int result; |
| |
| va_start(arg_ptr, vec); |
| result = vrdval(p, "", conv_slash, vec, arg_ptr); |
| va_end(arg_ptr); |
| |
| return result; |
| } |
| |
| // Parses /proc/diskstats |
| // 1 2 3 4 5 6(rd) 7 8 9 10(wr) 11 12 13 14 |
| // 3 0 hda 51292 14441 841783 926052 25717 79650 843256 3029804 0 148459 3956933 |
| // 3 1 hda1 0 0 0 0 <- ignore if only 4 fields |
| static int rdval_diskstats(const char* p, ullong *vec) |
| { |
| ullong rd = 0; // to avoid "warning: 'rd' might be used uninitialized" |
| int indexline = 0; |
| vec[0] = 0; |
| vec[1] = 0; |
| while (1) { |
| indexline++; |
| while (*p == ' ' || *p == '\t') p++; |
| if (*p == '\0') break; |
| if (*p == '\n') { |
| indexline = 0; |
| p++; |
| continue; |
| } |
| if (indexline == 6) { |
| rd = strtoull(p, NULL, 10); |
| } else if (indexline == 10) { |
| vec[0] += rd; // TODO: *sectorsize (don't know how to find out sectorsize) |
| vec[1] += strtoull(p, NULL, 10); |
| while (*p != '\n' && *p != '\0') p++; |
| continue; |
| } |
| while (*p > ' ') p++; // skip over value |
| } |
| return 0; |
| } |
| |
| static void scale(ullong ul) |
| { |
| char buf[5]; |
| |
| /* see http://en.wikipedia.org/wiki/Tera */ |
| smart_ulltoa4(ul, buf, " kmgtpezy"); |
| buf[4] = '\0'; |
| put(buf); |
| } |
| |
| |
| #define S_STAT(a) \ |
| typedef struct a { \ |
| struct s_stat *next; \ |
| void (*collect)(struct a *s); \ |
| const char *label; |
| #define S_STAT_END(a) } a; |
| |
| S_STAT(s_stat) |
| S_STAT_END(s_stat) |
| |
| static void collect_literal(s_stat *s ATTRIBUTE_UNUSED) |
| { |
| } |
| |
| static s_stat* init_literal(void) |
| { |
| s_stat *s = xmalloc(sizeof(s_stat)); |
| s->collect = collect_literal; |
| return (s_stat*)s; |
| } |
| |
| static s_stat* init_delay(const char *param) |
| { |
| delta = bb_strtoi(param, NULL, 0) * 1000; |
| deltanz = delta > 0 ? delta : 1; |
| need_seconds = (1000000%deltanz) != 0; |
| return NULL; |
| } |
| |
| static s_stat* init_cr(const char *param ATTRIBUTE_UNUSED) |
| { |
| final_str = "\r"; |
| return (s_stat*)0; |
| } |
| |
| |
| // user nice system idle iowait irq softirq (last 3 only in 2.6) |
| //cpu 649369 0 341297 4336769 11640 7122 1183 |
| //cpuN 649369 0 341297 4336769 11640 7122 1183 |
| enum { CPU_FIELDCNT = 7 }; |
| S_STAT(cpu_stat) |
| ullong old[CPU_FIELDCNT]; |
| int bar_sz; |
| char *bar; |
| S_STAT_END(cpu_stat) |
| |
| |
| static void collect_cpu(cpu_stat *s) |
| { |
| ullong data[CPU_FIELDCNT] = { 0, 0, 0, 0, 0, 0, 0 }; |
| unsigned frac[CPU_FIELDCNT] = { 0, 0, 0, 0, 0, 0, 0 }; |
| ullong all = 0; |
| int norm_all = 0; |
| int bar_sz = s->bar_sz; |
| char *bar = s->bar; |
| int i; |
| |
| if (rdval(get_file(&proc_stat), "cpu ", data, 1, 2, 3, 4, 5, 6, 7)) { |
| put_question_marks(bar_sz); |
| return; |
| } |
| |
| for (i = 0; i < CPU_FIELDCNT; i++) { |
| ullong old = s->old[i]; |
| if (data[i] < old) old = data[i]; //sanitize |
| s->old[i] = data[i]; |
| all += (data[i] -= old); |
| } |
| |
| if (all) { |
| for (i = 0; i < CPU_FIELDCNT; i++) { |
| ullong t = bar_sz * data[i]; |
| norm_all += data[i] = t / all; |
| frac[i] = t % all; |
| } |
| |
| while (norm_all < bar_sz) { |
| unsigned max = frac[0]; |
| int pos = 0; |
| for (i = 1; i < CPU_FIELDCNT; i++) { |
| if (frac[i] > max) max = frac[i], pos = i; |
| } |
| frac[pos] = 0; //avoid bumping up same value twice |
| data[pos]++; |
| norm_all++; |
| } |
| |
| memset(bar, '.', bar_sz); |
| memset(bar, 'S', data[2]); bar += data[2]; //sys |
| memset(bar, 'U', data[0]); bar += data[0]; //usr |
| memset(bar, 'N', data[1]); bar += data[1]; //nice |
| memset(bar, 'D', data[4]); bar += data[4]; //iowait |
| memset(bar, 'I', data[5]); bar += data[5]; //irq |
| memset(bar, 'i', data[6]); bar += data[6]; //softirq |
| } else { |
| memset(bar, '?', bar_sz); |
| } |
| put(s->bar); |
| } |
| |
| |
| static s_stat* init_cpu(const char *param) |
| { |
| int sz; |
| cpu_stat *s = xmalloc(sizeof(cpu_stat)); |
| s->collect = collect_cpu; |
| sz = strtol(param, NULL, 0); |
| if (sz < 10) sz = 10; |
| if (sz > 1000) sz = 1000; |
| s->bar = xmalloc(sz+1); |
| s->bar[sz] = '\0'; |
| s->bar_sz = sz; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(int_stat) |
| ullong old; |
| int no; |
| S_STAT_END(int_stat) |
| |
| static void collect_int(int_stat *s) |
| { |
| ullong data[1]; |
| ullong old; |
| |
| if (rdval(get_file(&proc_stat), "intr", data, s->no)) { |
| put_question_marks(4); |
| return; |
| } |
| |
| old = s->old; |
| if (data[0] < old) old = data[0]; //sanitize |
| s->old = data[0]; |
| scale(data[0] - old); |
| } |
| |
| static s_stat* init_int(const char *param) |
| { |
| int_stat *s = xmalloc(sizeof(int_stat)); |
| s->collect = collect_int; |
| if (param[0]=='\0') { |
| s->no = 1; |
| } else { |
| int n = strtoul(param, NULL, 0); |
| s->no = n+2; |
| } |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(ctx_stat) |
| ullong old; |
| S_STAT_END(ctx_stat) |
| |
| static void collect_ctx(ctx_stat *s) |
| { |
| ullong data[1]; |
| ullong old; |
| |
| if (rdval(get_file(&proc_stat), "ctxt", data, 1)) { |
| put_question_marks(4); |
| return; |
| } |
| |
| old = s->old; |
| if (data[0] < old) old = data[0]; //sanitize |
| s->old = data[0]; |
| scale(data[0] - old); |
| } |
| |
| static s_stat* init_ctx(const char *param ATTRIBUTE_UNUSED) |
| { |
| ctx_stat *s = xmalloc(sizeof(ctx_stat)); |
| s->collect = collect_ctx; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(blk_stat) |
| const char* lookfor; |
| ullong old[2]; |
| S_STAT_END(blk_stat) |
| |
| static void collect_blk(blk_stat *s) |
| { |
| ullong data[2]; |
| int i; |
| |
| if (is26) { |
| i = rdval_diskstats(get_file(&proc_diskstats), data); |
| } else { |
| i = rdval(get_file(&proc_stat), s->lookfor, data, 1, 2); |
| // Linux 2.4 reports bio in Kbytes, convert to sectors: |
| data[0] *= 2; |
| data[1] *= 2; |
| } |
| if (i) { |
| put_question_marks(9); |
| return; |
| } |
| |
| for (i=0; i<2; i++) { |
| ullong old = s->old[i]; |
| if (data[i] < old) old = data[i]; //sanitize |
| s->old[i] = data[i]; |
| data[i] -= old; |
| } |
| scale(data[0]*512); // TODO: *sectorsize |
| put_c(' '); |
| scale(data[1]*512); |
| } |
| |
| static s_stat* init_blk(const char *param ATTRIBUTE_UNUSED) |
| { |
| blk_stat *s = xmalloc(sizeof(blk_stat)); |
| s->collect = collect_blk; |
| s->lookfor = "page"; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(fork_stat) |
| ullong old; |
| S_STAT_END(fork_stat) |
| |
| static void collect_thread_nr(fork_stat *s ATTRIBUTE_UNUSED) |
| { |
| ullong data[1]; |
| |
| if (rdval_loadavg(get_file(&proc_loadavg), data, 4)) { |
| put_question_marks(4); |
| return; |
| } |
| scale(data[0]); |
| } |
| |
| static void collect_fork(fork_stat *s) |
| { |
| ullong data[1]; |
| ullong old; |
| |
| if (rdval(get_file(&proc_stat), "processes", data, 1)) { |
| put_question_marks(4); |
| return; |
| } |
| |
| old = s->old; |
| if (data[0] < old) old = data[0]; //sanitize |
| s->old = data[0]; |
| scale(data[0] - old); |
| } |
| |
| static s_stat* init_fork(const char *param) |
| { |
| fork_stat *s = xmalloc(sizeof(fork_stat)); |
| if (*param == 'n') { |
| s->collect = collect_thread_nr; |
| } else { |
| s->collect = collect_fork; |
| } |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(if_stat) |
| ullong old[4]; |
| const char *device; |
| char *device_colon; |
| S_STAT_END(if_stat) |
| |
| static void collect_if(if_stat *s) |
| { |
| ullong data[4]; |
| int i; |
| |
| if (rdval(get_file(&proc_net_dev), s->device_colon, data, 1, 3, 9, 11)) { |
| put_question_marks(10); |
| return; |
| } |
| |
| for (i=0; i<4; i++) { |
| ullong old = s->old[i]; |
| if (data[i] < old) old = data[i]; //sanitize |
| s->old[i] = data[i]; |
| data[i] -= old; |
| } |
| put_c(data[1] ? '*' : ' '); |
| scale(data[0]); |
| put_c(data[3] ? '*' : ' '); |
| scale(data[2]); |
| } |
| |
| static s_stat* init_if(const char *device) |
| { |
| if_stat *s = xmalloc(sizeof(if_stat)); |
| |
| if (!device || !device[0]) |
| bb_show_usage(); |
| s->collect = collect_if; |
| |
| s->device = device; |
| s->device_colon = xmalloc(strlen(device)+2); |
| strcpy(s->device_colon, device); |
| strcat(s->device_colon, ":"); |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(mem_stat) |
| char opt; |
| S_STAT_END(mem_stat) |
| |
| // "Memory" value should not include any caches. |
| // IOW: neither "ls -laR /" nor heavy read/write activity |
| // should affect it. We'd like to also include any |
| // long-term allocated kernel-side mem, but it is hard |
| // to figure out. For now, bufs, cached & slab are |
| // counted as "free" memory |
| //2.6.16: |
| //MemTotal: 773280 kB |
| //MemFree: 25912 kB - genuinely free |
| //Buffers: 320672 kB - cache |
| //Cached: 146396 kB - cache |
| //SwapCached: 0 kB |
| //Active: 183064 kB |
| //Inactive: 356892 kB |
| //HighTotal: 0 kB |
| //HighFree: 0 kB |
| //LowTotal: 773280 kB |
| //LowFree: 25912 kB |
| //SwapTotal: 131064 kB |
| //SwapFree: 131064 kB |
| //Dirty: 48 kB |
| //Writeback: 0 kB |
| //Mapped: 96620 kB |
| //Slab: 200668 kB - takes 7 Mb on my box fresh after boot, |
| // but includes dentries and inodes |
| // (== can take arbitrary amount of mem) |
| //CommitLimit: 517704 kB |
| //Committed_AS: 236776 kB |
| //PageTables: 1248 kB |
| //VmallocTotal: 516052 kB |
| //VmallocUsed: 3852 kB |
| //VmallocChunk: 512096 kB |
| //HugePages_Total: 0 |
| //HugePages_Free: 0 |
| //Hugepagesize: 4096 kB |
| static void collect_mem(mem_stat *s) |
| { |
| ullong m_total = 0; |
| ullong m_free = 0; |
| ullong m_bufs = 0; |
| ullong m_cached = 0; |
| ullong m_slab = 0; |
| |
| if (rdval(get_file(&proc_meminfo), "MemTotal:", &m_total, 1)) { |
| put_question_marks(4); |
| return; |
| } |
| if (s->opt == 't') { |
| scale(m_total << 10); |
| return; |
| } |
| |
| if (rdval(proc_meminfo.file, "MemFree:", &m_free , 1) |
| || rdval(proc_meminfo.file, "Buffers:", &m_bufs , 1) |
| || rdval(proc_meminfo.file, "Cached:", &m_cached, 1) |
| || rdval(proc_meminfo.file, "Slab:", &m_slab , 1) |
| ) { |
| put_question_marks(4); |
| return; |
| } |
| |
| m_free += m_bufs + m_cached + m_slab; |
| switch (s->opt) { |
| case 'f': |
| scale(m_free << 10); break; |
| default: |
| scale((m_total - m_free) << 10); break; |
| } |
| } |
| |
| static s_stat* init_mem(const char *param) |
| { |
| mem_stat *s = xmalloc(sizeof(mem_stat)); |
| s->collect = collect_mem; |
| s->opt = param[0]; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(swp_stat) |
| S_STAT_END(swp_stat) |
| |
| static void collect_swp(swp_stat *s ATTRIBUTE_UNUSED) |
| { |
| ullong s_total[1]; |
| ullong s_free[1]; |
| if (rdval(get_file(&proc_meminfo), "SwapTotal:", s_total, 1) |
| || rdval(proc_meminfo.file, "SwapFree:" , s_free, 1) |
| ) { |
| put_question_marks(4); |
| return; |
| } |
| scale((s_total[0]-s_free[0]) << 10); |
| } |
| |
| static s_stat* init_swp(const char *param ATTRIBUTE_UNUSED) |
| { |
| swp_stat *s = xmalloc(sizeof(swp_stat)); |
| s->collect = collect_swp; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(fd_stat) |
| S_STAT_END(fd_stat) |
| |
| static void collect_fd(fd_stat *s ATTRIBUTE_UNUSED) |
| { |
| ullong data[2]; |
| |
| if (rdval(get_file(&proc_sys_fs_filenr), "", data, 1, 2)) { |
| put_question_marks(4); |
| return; |
| } |
| |
| scale(data[0] - data[1]); |
| } |
| |
| static s_stat* init_fd(const char *param ATTRIBUTE_UNUSED) |
| { |
| fd_stat *s = xmalloc(sizeof(fd_stat)); |
| s->collect = collect_fd; |
| return (s_stat*)s; |
| } |
| |
| |
| S_STAT(time_stat) |
| int prec; |
| int scale; |
| S_STAT_END(time_stat) |
| |
| static void collect_time(time_stat *s) |
| { |
| char buf[sizeof("12:34:56.123456")]; |
| struct tm* tm; |
| int us = tv.tv_usec + s->scale/2; |
| time_t t = tv.tv_sec; |
| |
| if (us >= 1000000) { |
| t++; |
| us -= 1000000; |
| } |
| tm = localtime(&t); |
| |
| sprintf(buf, "%02d:%02d:%02d", tm->tm_hour, tm->tm_min, tm->tm_sec); |
| if (s->prec) |
| sprintf(buf+8, ".%0*d", s->prec, us / s->scale); |
| put(buf); |
| } |
| |
| static s_stat* init_time(const char *param) |
| { |
| int prec; |
| time_stat *s = xmalloc(sizeof(time_stat)); |
| |
| s->collect = collect_time; |
| prec = param[0]-'0'; |
| if (prec < 0) prec = 0; |
| else if (prec > 6) prec = 6; |
| s->prec = prec; |
| s->scale = 1; |
| while (prec++ < 6) |
| s->scale *= 10; |
| return (s_stat*)s; |
| } |
| |
| static void collect_info(s_stat *s) |
| { |
| gen ^= 1; |
| while (s) { |
| put(s->label); |
| s->collect(s); |
| s = s->next; |
| } |
| } |
| |
| |
| typedef s_stat* init_func(const char *param); |
| |
| static const char options[] ALIGN1 = "ncmsfixptbdr"; |
| static init_func *const init_functions[] = { |
| init_if, |
| init_cpu, |
| init_mem, |
| init_swp, |
| init_fd, |
| init_int, |
| init_ctx, |
| init_fork, |
| init_time, |
| init_blk, |
| init_delay, |
| init_cr |
| }; |
| |
| int nmeter_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int nmeter_main(int argc, char **argv) |
| { |
| char buf[32]; |
| s_stat *first = NULL; |
| s_stat *last = NULL; |
| s_stat *s; |
| char *cur, *prev; |
| |
| INIT_G(); |
| |
| xchdir("/proc"); |
| |
| if (argc != 2) |
| bb_show_usage(); |
| |
| if (open_read_close("version", buf, sizeof(buf)) > 0) |
| is26 = (strstr(buf, " 2.4.")==NULL); |
| |
| // Can use argv[1] directly, but this will mess up |
| // parameters as seen by e.g. ps. Making a copy... |
| cur = xstrdup(argv[1]); |
| while (1) { |
| char *param, *p; |
| prev = cur; |
| again: |
| cur = strchr(cur, '%'); |
| if (!cur) |
| break; |
| if (cur[1] == '%') { // %% |
| strcpy(cur, cur+1); |
| cur++; |
| goto again; |
| } |
| *cur++ = '\0'; // overwrite % |
| if (cur[0] == '[') { |
| // format: %[foptstring] |
| cur++; |
| p = strchr(options, cur[0]); |
| param = cur+1; |
| while (cur[0] != ']') { |
| if (!cur[0]) |
| bb_show_usage(); |
| cur++; |
| } |
| *cur++ = '\0'; // overwrite [ |
| } else { |
| // format: %NNNNNNf |
| param = cur; |
| while (cur[0] >= '0' && cur[0] <= '9') |
| cur++; |
| if (!cur[0]) |
| bb_show_usage(); |
| p = strchr(options, cur[0]); |
| *cur++ = '\0'; // overwrite format char |
| } |
| if (!p) |
| bb_show_usage(); |
| s = init_functions[p-options](param); |
| if (s) { |
| s->label = prev; |
| s->next = 0; |
| if (!first) |
| first = s; |
| else |
| last->next = s; |
| last = s; |
| } else { |
| // %NNNNd or %r option. remove it from string |
| strcpy(prev + strlen(prev), cur); |
| cur = prev; |
| } |
| } |
| if (prev[0]) { |
| s = init_literal(); |
| s->label = prev; |
| s->next = 0; |
| if (!first) |
| first = s; |
| else |
| last->next = s; |
| last = s; |
| } |
| |
| // Generate first samples but do not print them, they're bogus |
| collect_info(first); |
| reset_outbuf(); |
| if (delta >= 0) { |
| gettimeofday(&tv, NULL); |
| usleep(delta > 1000000 ? 1000000 : delta - tv.tv_usec%deltanz); |
| } |
| |
| while (1) { |
| gettimeofday(&tv, NULL); |
| collect_info(first); |
| put(final_str); |
| print_outbuf(); |
| |
| // Negative delta -> no usleep at all |
| // This will hog the CPU but you can have REALLY GOOD |
| // time resolution ;) |
| // TODO: detect and avoid useless updates |
| // (like: nothing happens except time) |
| if (delta >= 0) { |
| int rem; |
| // can be commented out, will sacrifice sleep time precision a bit |
| gettimeofday(&tv, NULL); |
| if (need_seconds) |
| rem = delta - ((ullong)tv.tv_sec*1000000 + tv.tv_usec) % deltanz; |
| else |
| rem = delta - tv.tv_usec%deltanz; |
| // Sometimes kernel wakes us up just a tiny bit earlier than asked |
| // Do not go to very short sleep in this case |
| if (rem < delta/128) { |
| rem += delta; |
| } |
| usleep(rem); |
| } |
| } |
| |
| /*return 0;*/ |
| } |