| /* vi: set sw=8 ts=8: */ |
| /* |
| * This file suffers from chronically incorrect tabification |
| * of messages. Before editing this file: |
| * 1. Switch you editor to 8-space tab mode. |
| * 2. Do not use \t in messages, use real tab character. |
| * 3. Start each source line with message as follows: |
| * |<7 spaces>"text with tabs".... |
| * or |
| * |<5 spaces>"\ntext with tabs".... |
| */ |
| |
| #ifndef __BB_USAGE_H__ |
| #define __BB_USAGE_H__ |
| |
| |
| #define NOUSAGE_STR "\b" |
| |
| |
| #define addgroup_trivial_usage \ |
| "[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name" |
| #define addgroup_full_usage "\n\n" \ |
| "Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \ |
| "\nOptions:" \ |
| "\n -g GID Group id" \ |
| |
| #define adduser_trivial_usage \ |
| "[OPTIONS] user_name" |
| #define adduser_full_usage "\n\n" \ |
| "Add an user\n" \ |
| "\nOptions:" \ |
| "\n -h DIR Home directory" \ |
| "\n -g GECOS GECOS field" \ |
| "\n -s SHELL Login shell" \ |
| "\n -G GROUP Add user to existing group" \ |
| "\n -S Create a system user" \ |
| "\n -D Do not assign a password" \ |
| "\n -H Do not create home directory" \ |
| |
| #define adjtimex_trivial_usage \ |
| "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" |
| #define adjtimex_full_usage "\n\n" \ |
| "Read and optionally set system timebase parameters. See adjtimex(2).\n" \ |
| "\nOptions:" \ |
| "\n -q Quiet" \ |
| "\n -o offset Time offset, microseconds" \ |
| "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \ |
| "\n (positive values make clock run faster)" \ |
| "\n -t tick Microseconds per tick, usually 10000" \ |
| "\n -p timeconstant" \ |
| |
| #define ar_trivial_usage \ |
| "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" |
| #define ar_full_usage "\n\n" \ |
| "Extract or list FILES from an ar archive\n" \ |
| "\nOptions:" \ |
| "\n -o Preserve original dates" \ |
| "\n -p Extract to stdout" \ |
| "\n -t List" \ |
| "\n -x Extract" \ |
| "\n -v Verbose" \ |
| |
| #define arp_trivial_usage \ |
| "\n" \ |
| "[-vn] [-H type] [-i if] -a [hostname]\n" \ |
| "[-v] [-i if] -d hostname [pub]\n" \ |
| "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \ |
| "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ |
| "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" |
| #define arp_full_usage "\n\n" \ |
| "Manipulate ARP cache\n" \ |
| "\nOptions:" \ |
| "\n -a Display (all) hosts" \ |
| "\n -s Set new ARP entry" \ |
| "\n -d Delete a specified entry" \ |
| "\n -v Verbose" \ |
| "\n -n Don't resolve names" \ |
| "\n -i IF Network interface" \ |
| "\n -D Read <hwaddr> from given device" \ |
| "\n -A, -p AF Protocol family" \ |
| "\n -H HWTYPE Hardware address type" \ |
| |
| #define arping_trivial_usage \ |
| "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target" |
| #define arping_full_usage "\n\n" \ |
| "Send ARP requests/replies\n" \ |
| "\nOptions:" \ |
| "\n -f Quit on first ARP reply" \ |
| "\n -q Quiet" \ |
| "\n -b Keep broadcasting, don't go unicast" \ |
| "\n -D Duplicated address detection mode" \ |
| "\n -U Unsolicited ARP mode, update your neighbors" \ |
| "\n -A ARP answer mode, update your neighbors" \ |
| "\n -c N Stop after sending N ARP requests" \ |
| "\n -w timeout Time to wait for ARP reply, in seconds" \ |
| "\n -I dev Interface to use (default eth0)" \ |
| "\n -s sender Sender IP address" \ |
| "\n target Target IP address" \ |
| |
| #define sh_trivial_usage NOUSAGE_STR |
| #define sh_full_usage "" |
| #define ash_trivial_usage NOUSAGE_STR |
| #define ash_full_usage "" |
| #define hush_trivial_usage NOUSAGE_STR |
| #define hush_full_usage "" |
| #define msh_trivial_usage NOUSAGE_STR |
| #define msh_full_usage "" |
| |
| #define awk_trivial_usage \ |
| "[OPTION]... [program-text] [FILE...]" |
| #define awk_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -v var=val Set variable" \ |
| "\n -F sep Use sep as field separator" \ |
| "\n -f file Read program from file" \ |
| |
| #define basename_trivial_usage \ |
| "FILE [SUFFIX]" |
| #define basename_full_usage "\n\n" \ |
| "Strip directory path and suffixes from FILE.\n" \ |
| "If specified, also remove any trailing SUFFIX." |
| #define basename_example_usage \ |
| "$ basename /usr/local/bin/foo\n" \ |
| "foo\n" \ |
| "$ basename /usr/local/bin/\n" \ |
| "bin\n" \ |
| "$ basename /foo/bar.txt .txt\n" \ |
| "bar" |
| |
| #define fbsplash_trivial_usage \ |
| "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]" |
| #define fbsplash_full_usage "\n\n" \ |
| "Options:\n" \ |
| "\n -s Image" \ |
| "\n -c Hide cursor" \ |
| "\n -d Framebuffer device (default /dev/fb0)" \ |
| "\n -i Config file (var=value):" \ |
| "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \ |
| "\n BAR_R,BAR_G,BAR_B" \ |
| "\n -f Control pipe (else exit after drawing image)" \ |
| "\n commands: 'NN' (% for progress bar) or 'exit'" \ |
| |
| #define brctl_trivial_usage \ |
| "COMMAND [BRIDGE [INTERFACE]]" |
| #define brctl_full_usage "\n\n" \ |
| "Manage ethernet bridges.\n" \ |
| "\nCommands:" \ |
| USE_FEATURE_BRCTL_SHOW( \ |
| "\n show Show a list of bridges" \ |
| ) \ |
| "\n addbr BRIDGE Create BRIDGE" \ |
| "\n delbr BRIDGE Delete BRIDGE" \ |
| "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \ |
| "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \ |
| USE_FEATURE_BRCTL_FANCY( \ |
| "\n setageing BRIDGE TIME Set ageing time" \ |
| "\n setfd BRIDGE TIME Set bridge forward delay" \ |
| "\n sethello BRIDGE TIME Set hello time" \ |
| "\n setmaxage BRIDGE TIME Set max message age" \ |
| "\n setpathcost BRIDGE COST Set path cost" \ |
| "\n setportprio BRIDGE PRIO Set port priority" \ |
| "\n setbridgeprio BRIDGE PRIO Set bridge priority" \ |
| "\n stp BRIDGE [1|0] STP on/off" \ |
| ) \ |
| |
| #define bunzip2_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define bunzip2_full_usage "\n\n" \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ |
| "\nOptions:" \ |
| "\n -c Write to standard output" \ |
| "\n -f Force" \ |
| |
| #define bzip2_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define bzip2_full_usage "\n\n" \ |
| "Compress FILE(s) with bzip2 algorithm.\n" \ |
| "When FILE is '-' or unspecified, reads standard input. Implies -c.\n" \ |
| "\nOptions:" \ |
| "\n -c Write to standard output" \ |
| "\n -d Decompress" \ |
| "\n -f Force" \ |
| "\n -1..-9 Compression level" \ |
| |
| #define busybox_notes_usage \ |
| "Hello world!\n" |
| |
| #define bzcat_trivial_usage \ |
| "FILE" |
| #define bzcat_full_usage "\n\n" \ |
| "Uncompress to stdout" |
| |
| #define unlzma_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define unlzma_full_usage "\n\n" \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ |
| "\nOptions:" \ |
| "\n -c Write to standard output" \ |
| "\n -f Force" \ |
| |
| #define lzmacat_trivial_usage \ |
| "FILE" |
| #define lzmacat_full_usage "\n\n" \ |
| "Uncompress to stdout" |
| |
| #define cal_trivial_usage \ |
| "[-jy] [[month] year]" |
| #define cal_full_usage "\n\n" \ |
| "Display a calendar\n" \ |
| "\nOptions:" \ |
| "\n -j Use julian dates" \ |
| "\n -y Display the entire year" \ |
| |
| #define cat_trivial_usage \ |
| "[-u] [FILE]..." |
| #define cat_full_usage "\n\n" \ |
| "Concatenate FILE(s) and print them to stdout\n" \ |
| "\nOptions:" \ |
| "\n -u Use unbuffered i/o (ignored)" \ |
| |
| #define cat_example_usage \ |
| "$ cat /proc/uptime\n" \ |
| "110716.72 17.67" |
| |
| #define catv_trivial_usage \ |
| "[-etv] [FILE]..." |
| #define catv_full_usage "\n\n" \ |
| "Display nonprinting characters as ^x or M-x\n" \ |
| "\nOptions:" \ |
| "\n -e End each line with $" \ |
| "\n -t Show tabs as ^I" \ |
| "\n -v Don't use ^x or M-x escapes" \ |
| |
| #define chat_trivial_usage \ |
| "EXPECT [SEND [EXPECT [SEND...]]]" |
| #define chat_full_usage "\n\n" \ |
| "Useful for interacting with a modem connected to stdin/stdout.\n" \ |
| "A script consists of one or more \"expect-send\" pairs of strings,\n" \ |
| "each pair is a pair of arguments. Example:\n" \ |
| "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \ |
| |
| #define chattr_trivial_usage \ |
| "[-R] [-+=AacDdijsStTu] [-v version] files..." |
| #define chattr_full_usage "\n\n" \ |
| "Change file attributes on an ext2 fs\n" \ |
| "\nModifiers:" \ |
| "\n - Remove attributes" \ |
| "\n + Add attributes" \ |
| "\n = Set attributes" \ |
| "\nAttributes:" \ |
| "\n A Don't track atime" \ |
| "\n a Append mode only" \ |
| "\n c Enable compress" \ |
| "\n D Write dir contents synchronously" \ |
| "\n d Do not backup with dump" \ |
| "\n i Cannot be modified (immutable)" \ |
| "\n j Write all data to journal first" \ |
| "\n s Zero disk storage when deleted" \ |
| "\n S Write file contents synchronously" \ |
| "\n t Disable tail-merging of partial blocks with other files" \ |
| "\n u Allow file to be undeleted" \ |
| "\nOptions:" \ |
| "\n -R Recursively list subdirectories" \ |
| "\n -v Set the file's version/generation number" \ |
| |
| #define chcon_trivial_usage \ |
| "[OPTIONS] CONTEXT FILE..." \ |
| "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \ |
| USE_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n chcon [OPTIONS] --reference=RFILE FILE..." \ |
| ) |
| #define chcon_full_usage "\n\n" \ |
| "Change the security context of each FILE to CONTEXT\n" \ |
| USE_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n -v,--verbose Verbose" \ |
| "\n -c,--changes Report changes made" \ |
| "\n -h,--no-dereference Affect symlinks instead of their targets" \ |
| "\n -f,--silent,--quiet Suppress most error messages" \ |
| "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ |
| "\n -u,--user=USER Set user/role/type/range in the target" \ |
| "\n -r,--role=ROLE security context" \ |
| "\n -t,--type=TYPE" \ |
| "\n -l,--range=RANGE" \ |
| "\n -R,--recursive Recurse subdirectories" \ |
| ) \ |
| SKIP_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n -v Verbose" \ |
| "\n -c Report changes made" \ |
| "\n -h Affect symlinks instead of their targets" \ |
| "\n -f Suppress most error messages" \ |
| "\n -u USER Set user/role/type/range in the target security context" \ |
| "\n -r ROLE" \ |
| "\n -t TYPE" \ |
| "\n -l RNG" \ |
| "\n -R Recurse subdirectories" \ |
| ) |
| |
| #define chmod_trivial_usage \ |
| "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." |
| #define chmod_full_usage "\n\n" \ |
| "Each MODE is one or more of the letters ugoa, one of the\n" \ |
| "symbols +-= and one or more of the letters rwxst\n" \ |
| "\nOptions:" \ |
| "\n -R Recurse directories" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v List all files" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chmod_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chmod u+x /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ |
| "$ chmod 444 /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chgrp_trivial_usage \ |
| "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..." |
| #define chgrp_full_usage "\n\n" \ |
| "Change the group membership of each FILE to GROUP\n" \ |
| "\nOptions:" \ |
| "\n -R Recurse directories" \ |
| "\n -h Affect symlinks instead of symlink targets" \ |
| "\n -L Traverse all symlinks to directories" \ |
| "\n -H Traverse symlinks on command line only" \ |
| "\n -P Do not traverse symlinks (default)" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v Verbose" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chgrp_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chgrp root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chown_trivial_usage \ |
| "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." |
| #define chown_full_usage "\n\n" \ |
| "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \ |
| "\nOptions:" \ |
| "\n -R Recurse directories" \ |
| "\n -h Affect symlinks instead of symlink targets" \ |
| "\n -L Traverse all symlinks to directories" \ |
| "\n -H Traverse symlinks on command line only" \ |
| "\n -P Do not traverse symlinks (default)" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v List all files" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chown_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root.root /tmp/foo\n" \ |
| "ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chpst_trivial_usage \ |
| "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \ |
| " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \ |
| " [-p N] [-f BYTES] [-c BYTES] PROG ARGS" |
| #define chpst_full_usage "\n\n" \ |
| "Change the process state and run PROG\n" \ |
| "\nOptions:" \ |
| "\n -u USER[:GRP] Set uid and gid" \ |
| "\n -U USER[:GRP] Set $UID and $GID in environment" \ |
| "\n -e DIR Set environment variables as specified by files" \ |
| "\n in DIR: file=1st_line_of_file" \ |
| "\n -/ DIR Chroot to DIR" \ |
| "\n -n NICE Add NICE to nice value" \ |
| "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \ |
| "\n -d BYTES Limit data segment" \ |
| "\n -o N Limit number of open files per process" \ |
| "\n -p N Limit number of processes per uid" \ |
| "\n -f BYTES Limit output file sizes" \ |
| "\n -c BYTES Limit core file size" \ |
| "\n -v Verbose" \ |
| "\n -P Create new process group" \ |
| "\n -0 Close standard input" \ |
| "\n -1 Close standard output" \ |
| "\n -2 Close standard error" \ |
| |
| #define setuidgid_trivial_usage \ |
| "account prog args" |
| #define setuidgid_full_usage "\n\n" \ |
| "Set uid and gid to account's uid and gid, removing all supplementary\n" \ |
| "groups and run PROG" |
| #define envuidgid_trivial_usage \ |
| "account prog args" |
| #define envuidgid_full_usage "\n\n" \ |
| "Set $UID to account's uid and $GID to account's gid and run PROG" |
| #define envdir_trivial_usage \ |
| "dir prog args" |
| #define envdir_full_usage "\n\n" \ |
| "Set various environment variables as specified by files\n" \ |
| "in the directory dir and run PROG" |
| #define softlimit_trivial_usage \ |
| "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \ |
| " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \ |
| " PROG ARGS" |
| #define softlimit_full_usage "\n\n" \ |
| "Set soft resource limits, then run PROG\n" \ |
| "\nOptions:" \ |
| "\n -a BYTES Limit total size of all segments" \ |
| "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \ |
| "\n -d BYTES Limit data segment" \ |
| "\n -s BYTES Limit stack segment" \ |
| "\n -l BYTES Limit locked memory size" \ |
| "\n -o N Limit number of open files per process" \ |
| "\n -p N Limit number of processes per uid" \ |
| "\nOptions controlling file sizes:" \ |
| "\n -f BYTES Limit output file sizes" \ |
| "\n -c BYTES Limit core file size" \ |
| "\nEfficiency opts:" \ |
| "\n -r BYTES Limit resident set size" \ |
| "\n -t N Limit CPU time, process receives" \ |
| "\n a SIGXCPU after N seconds" \ |
| |
| #define chroot_trivial_usage \ |
| "NEWROOT [COMMAND...]" |
| #define chroot_full_usage "\n\n" \ |
| "Run COMMAND with root directory set to NEWROOT" |
| #define chroot_example_usage \ |
| "$ ls -l /bin/ls\n" \ |
| "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ |
| "# mount /dev/hdc1 /mnt -t minix\n" \ |
| "# chroot /mnt\n" \ |
| "# ls -l /bin/ls\n" \ |
| "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" |
| |
| #define chvt_trivial_usage \ |
| "N" |
| #define chvt_full_usage "\n\n" \ |
| "Change the foreground virtual terminal to /dev/ttyN" |
| |
| #define cksum_trivial_usage \ |
| "FILES..." |
| #define cksum_full_usage "\n\n" \ |
| "Calculate the CRC32 checksums of FILES" |
| |
| #define clear_trivial_usage \ |
| "" |
| #define clear_full_usage "\n\n" \ |
| "Clear screen" |
| |
| #define cmp_trivial_usage \ |
| "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]" |
| #define cmp_full_usage "\n\n" \ |
| "Compares FILE1 vs stdin if FILE2 is not specified\n" \ |
| "\nOptions:" \ |
| "\n -l Write the byte numbers (decimal) and values (octal)" \ |
| "\n for all differing bytes" \ |
| "\n -s Quiet" \ |
| |
| #define comm_trivial_usage \ |
| "[-123] FILE1 FILE2" |
| #define comm_full_usage "\n\n" \ |
| "Compare FILE1 to FILE2, or to stdin if - is specified\n" \ |
| "\nOptions:" \ |
| "\n -1 Suppress lines unique to FILE1" \ |
| "\n -2 Suppress lines unique to FILE2" \ |
| "\n -3 Suppress lines common to both files" \ |
| |
| #define bbconfig_trivial_usage \ |
| "" |
| #define bbconfig_full_usage "\n\n" \ |
| "Print the config file which built busybox" |
| |
| #define bbsh_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: bbsh -c command [args]..." |
| #define bbsh_full_usage "\n\n" \ |
| "The bbsh shell (command interpreter)" |
| |
| #define chrt_trivial_usage \ |
| "[OPTION]... [prio] [pid | command [arg]...]" |
| #define chrt_full_usage "\n\n" \ |
| "Manipulate real-time attributes of a process\n" \ |
| "\nOptions:" \ |
| "\n -p Operate on pid" \ |
| "\n -r Set scheduling policy to SCHED_RR" \ |
| "\n -f Set scheduling policy to SCHED_FIFO" \ |
| "\n -o Set scheduling policy to SCHED_OTHER" \ |
| "\n -m Show min and max priorities" \ |
| |
| #define chrt_example_usage \ |
| "$ chrt -r 4 sleep 900; x=$!\n" \ |
| "$ chrt -f -p 3 $x\n" \ |
| "You need CAP_SYS_NICE privileges to set scheduling attributes of a process" |
| |
| #define cp_trivial_usage \ |
| "[OPTION]... SOURCE DEST" |
| #define cp_full_usage "\n\n" \ |
| "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \ |
| "\nOptions:" \ |
| "\n -a Same as -dpR" \ |
| USE_SELINUX( \ |
| "\n -c Preserve security context" \ |
| ) \ |
| "\n -d,-P Preserve links" \ |
| "\n -H,-L Dereference all symlinks (default)" \ |
| "\n -p Preserve file attributes if possible" \ |
| "\n -f Force overwrite" \ |
| "\n -i Prompt before overwrite" \ |
| "\n -R,-r Recurse directories" \ |
| "\n -l,-s Create (sym)links" \ |
| |
| #define cpio_trivial_usage \ |
| "-[dim" USE_FEATURE_CPIO_O("o") "tuv][F cpiofile]" \ |
| USE_FEATURE_CPIO_O( "[H newc]" ) |
| #define cpio_full_usage "\n\n" \ |
| "Extract or list files from a cpio archive" \ |
| USE_FEATURE_CPIO_O( ", or create a cpio archive" ) \ |
| "\n" \ |
| "Main operation mode:" \ |
| "\n d Make leading directories" \ |
| "\n i Extract" \ |
| "\n m Preserve mtime" \ |
| USE_FEATURE_CPIO_O( \ |
| "\n o Create" \ |
| "\n H newc Define format" \ |
| ) \ |
| "\n t List" \ |
| "\n v Verbose" \ |
| "\n u Unconditional overwrite" \ |
| "\n F Input from file" \ |
| |
| #define crond_trivial_usage \ |
| "-fbS -l N " USE_DEBUG_CROND_OPTION("-d N ") "-L LOGFILE -c DIR" |
| #define crond_full_usage "\n\n" \ |
| " -f Foreground" \ |
| "\n -b Background (default)" \ |
| "\n -S Log to syslog (default)" \ |
| "\n -l Set log level. 0 is the most verbose, default 8" \ |
| USE_DEBUG_CROND_OPTION( \ |
| "\n -d Set log level, log to stderr" \ |
| ) \ |
| "\n -L Log to file" \ |
| "\n -c Working dir" \ |
| |
| #define crontab_trivial_usage \ |
| "[-c DIR] [-u USER] [-ler]|[FILE]" |
| #define crontab_full_usage "\n\n" \ |
| " -c Crontab directory" \ |
| "\n -u User" \ |
| "\n -l List crontab" \ |
| "\n -e Edit crontab" \ |
| "\n -r Delete crontab" \ |
| "\n FILE Replace crontab by FILE ('-': stdin)" \ |
| |
| #define cryptpw_trivial_usage \ |
| "[-a des|md5] [string]" |
| #define cryptpw_full_usage "\n\n" \ |
| "Output crypted string.\n" \ |
| "If string isn't supplied on cmdline, read it from stdin.\n" \ |
| "\nOptions:" \ |
| "\n -a Algorithm to use (default: md5)" \ |
| |
| #define cttyhack_trivial_usage NOUSAGE_STR |
| #define cttyhack_full_usage "" |
| |
| #define cut_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define cut_full_usage "\n\n" \ |
| "Print selected fields from each input FILE to standard output\n" \ |
| "\nOptions:" \ |
| "\n -b LIST Output only bytes from LIST" \ |
| "\n -c LIST Output only characters from LIST" \ |
| "\n -d CHAR Use CHAR instead of tab as the field delimiter" \ |
| "\n -s Output only the lines containing delimiter" \ |
| "\n -f N Print only these fields" \ |
| "\n -n Ignored" \ |
| |
| #define cut_example_usage \ |
| "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ |
| "Hello\n" \ |
| "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ |
| "world\n" |
| |
| #define date_trivial_usage \ |
| "[OPTION]... [+FMT] [TIME]" |
| #define date_full_usage "\n\n" \ |
| "Display time (using +FMT), or set time\n" \ |
| "\nOptions:" \ |
| "\n -u Work in UTC (don't convert to local time)" \ |
| "\n -R Output RFC-822 compliant date string" \ |
| USE_FEATURE_DATE_ISOFMT( \ |
| "\n -I[SPEC] Output ISO-8601 compliant date string" \ |
| "\n SPEC='date' (default) for date only," \ |
| "\n 'hours', 'minutes', or 'seconds' for date and" \ |
| "\n time to the indicated precision" \ |
| ) \ |
| "\n -d TIME Display TIME, not 'now'" \ |
| "\n -r FILE Display last modification time of FILE" \ |
| "\n [-s] TIME Set time to TIME" \ |
| USE_FEATURE_DATE_ISOFMT( \ |
| "\n -D FMT Use FMT for str->date conversion" \ |
| ) \ |
| "\n" \ |
| "\nRecognized formats for TIME:" \ |
| "\n hh:mm[:ss]" \ |
| "\n [YYYY.]MM.DD-hh:mm[:ss]" \ |
| "\n YYYY-MM-DD hh:mm[:ss]" \ |
| "\n MMDDhhmm[[YY]YY][.ss]" \ |
| |
| #define date_example_usage \ |
| "$ date\n" \ |
| "Wed Apr 12 18:52:41 MDT 2000\n" |
| |
| #define dc_trivial_usage \ |
| "expression..." |
| #define dc_full_usage "\n\n" \ |
| "Tiny RPN calculator. Operations:\n" \ |
| "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \ |
| "p - print top of the stack (without altering the stack),\n" \ |
| "f - print entire stack, o - pop the value and set output radix\n" \ |
| "(value must be 10 or 16).\n" \ |
| "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \ |
| |
| #define dc_example_usage \ |
| "$ dc 2 2 + p\n" \ |
| "4\n" \ |
| "$ dc 8 8 \\* 2 2 + / p\n" \ |
| "16\n" \ |
| "$ dc 0 1 and p\n" \ |
| "0\n" \ |
| "$ dc 0 1 or p\n" \ |
| "1\n" \ |
| "$ echo 72 9 div 8 mul p | dc\n" \ |
| "64\n" |
| |
| #define dd_trivial_usage \ |
| "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ |
| " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]") |
| #define dd_full_usage "\n\n" \ |
| "Copy a file with converting and formatting\n" \ |
| "\nOptions:" \ |
| "\n if=FILE Read from FILE instead of stdin" \ |
| "\n of=FILE Write to FILE instead of stdout" \ |
| "\n bs=N Read and write N bytes at a time" \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| "\n ibs=N Read N bytes at a time" \ |
| ) \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| "\n obs=N Write N bytes at a time" \ |
| ) \ |
| "\n count=N Copy only N input blocks" \ |
| "\n skip=N Skip N input blocks" \ |
| "\n seek=N Skip N output blocks" \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| "\n conv=notrunc Don't truncate output file" \ |
| "\n conv=noerror Continue after read errors" \ |
| "\n conv=sync Pad blocks with zeros" \ |
| "\n conv=fsync Physically write data out before finishing" \ |
| ) \ |
| "\n" \ |
| "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \ |
| "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \ |
| |
| #define dd_example_usage \ |
| "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ |
| "4+0 records in\n" \ |
| "4+0 records out\n" |
| |
| #define deallocvt_trivial_usage \ |
| "[N]" |
| #define deallocvt_full_usage "\n\n" \ |
| "Deallocate unused virtual terminal /dev/ttyN" |
| |
| #define delgroup_trivial_usage \ |
| USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP" |
| #define delgroup_full_usage "\n\n" \ |
| "Delete group GROUP from the system" \ |
| USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP") |
| |
| #define deluser_trivial_usage \ |
| "USER" |
| #define deluser_full_usage "\n\n" \ |
| "Delete USER from the system" |
| |
| #define depmod_trivial_usage NOUSAGE_STR |
| #define depmod_full_usage "" |
| |
| #define devmem_trivial_usage \ |
| "ADDRESS [WIDTH [VALUE]]" |
| |
| #define devmem_full_usage "\n\n" \ |
| "Read/write from physical address\n" \ |
| "\n ADDRESS Address to act upon" \ |
| "\n WIDTH Width (8/16/...)" \ |
| "\n VALUE Data to be written" \ |
| |
| #define devfsd_trivial_usage \ |
| "mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]") |
| #define devfsd_full_usage "\n\n" \ |
| "Manage devfs permissions and old device name symlinks\n" \ |
| "\nOptions:" \ |
| "\n mntpnt The mount point where devfs is mounted" \ |
| "\n -v Print the protocol version numbers for devfsd" \ |
| "\n and the kernel-side protocol version and exit" \ |
| USE_DEVFSD_FG_NP( \ |
| "\n -fg Run in foreground" \ |
| "\n -np Exit after parsing the configuration file" \ |
| "\n and processing synthetic REGISTER events," \ |
| "\n do not poll for events" \ |
| ) |
| |
| #define df_trivial_usage \ |
| "[-Pk" \ |
| USE_FEATURE_HUMAN_READABLE("mh") \ |
| USE_FEATURE_DF_FANCY("ai] [-B SIZE") \ |
| "] [FILESYSTEM...]" |
| #define df_full_usage "\n\n" \ |
| "Print filesystem usage statistics\n" \ |
| "\nOptions:" \ |
| "\n -P POSIX output format" \ |
| "\n -k 1024-byte blocks (default)" \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n -m 1M-byte blocks" \ |
| "\n -h Human readable (e.g. 1K 243M 2G)" \ |
| ) \ |
| USE_FEATURE_DF_FANCY( \ |
| "\n -a Show all filesystems" \ |
| "\n -i Inodes" \ |
| "\n -B SIZE Blocksize" \ |
| ) \ |
| |
| #define df_example_usage \ |
| "$ df\n" \ |
| "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" \ |
| "/dev/sda1 64216 36364 27852 57% /boot\n" \ |
| "$ df /dev/sda3\n" \ |
| "Filesystem 1K-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" \ |
| "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \ |
| "Filesystem 512B-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 17381728 17107080 274648 98% /\n" \ |
| "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \ |
| "Filesystem 512-blocks Used Available Capacity Mounted on\n" \ |
| "/dev/sda3 17381728 17107080 274648 98% /\n" |
| |
| #define dhcprelay_trivial_usage \ |
| "[client1,client2,...] [server_device]" |
| #define dhcprelay_full_usage "\n\n" \ |
| "Relay dhcp requests from client devices to server device.\n" \ |
| "Pass clients as CSV" |
| |
| #define diff_trivial_usage \ |
| "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" |
| #define diff_full_usage "\n\n" \ |
| "Compare files line by line and output the differences between them.\n" \ |
| "This implementation supports unified diffs only.\n" \ |
| "\nOptions:" \ |
| "\n -a Treat all files as text" \ |
| "\n -b Ignore changes in the amount of whitespace" \ |
| "\n -d Try hard to find a smaller set of changes" \ |
| "\n -i Ignore case differences" \ |
| "\n -L Use LABEL instead of the filename in the unified header" \ |
| "\n -N Treat absent files as empty" \ |
| "\n -q Output only whether files differ" \ |
| "\n -r Recursively compare subdirectories" \ |
| "\n -S Start with FILE when comparing directories" \ |
| "\n -T Make tabs line up by prefixing a tab when necessary" \ |
| "\n -s Report when two files are the same" \ |
| "\n -t Expand tabs to spaces in output" \ |
| "\n -U Output LINES lines of context" \ |
| "\n -w Ignore all whitespace" \ |
| |
| #define dirname_trivial_usage \ |
| "FILENAME" |
| #define dirname_full_usage "\n\n" \ |
| "Strip non-directory suffix from FILENAME" |
| #define dirname_example_usage \ |
| "$ dirname /tmp/foo\n" \ |
| "/tmp\n" \ |
| "$ dirname /tmp/foo/\n" \ |
| "/tmp\n" |
| |
| #define dmesg_trivial_usage \ |
| "[-c] [-n LEVEL] [-s SIZE]" |
| #define dmesg_full_usage "\n\n" \ |
| "Print or control the kernel ring buffer\n" \ |
| "\nOptions:" \ |
| "\n -c Clear ring buffer after printing" \ |
| "\n -n LEVEL Set console logging level" \ |
| "\n -s SIZE Buffer size" \ |
| |
| #define dnsd_trivial_usage \ |
| "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" |
| #define dnsd_full_usage "\n\n" \ |
| "Small static DNS server daemon\n" \ |
| "\nOptions:" \ |
| "\n -c Config filename" \ |
| "\n -t TTL in seconds" \ |
| "\n -p Listening port" \ |
| "\n -i Listening ip (default all)" \ |
| "\n -d Daemonize" \ |
| |
| #define dos2unix_trivial_usage \ |
| "[option] [FILE]" |
| #define dos2unix_full_usage "\n\n" \ |
| "Convert FILE from dos to unix format.\n" \ |
| "When no file is given, use stdin/stdout.\n" \ |
| "\nOptions:" \ |
| "\n -u dos2unix" \ |
| "\n -d unix2dos" \ |
| |
| #define dpkg_trivial_usage \ |
| "[-ilCPru] [-F option] package_name" |
| #define dpkg_full_usage "\n\n" \ |
| "Install, remove and manage Debian packages\n" \ |
| "\nOptions:" \ |
| "\n -i Install the package" \ |
| "\n -l List of installed packages" \ |
| "\n -C Configure an unpackaged package" \ |
| "\n -F depends Ignore dependency problems" \ |
| "\n -P Purge all files of a package" \ |
| "\n -r Remove all but the configuration files for a package" \ |
| "\n -u Unpack a package, but don't configure it" \ |
| |
| #define dpkg_deb_trivial_usage \ |
| "[-cefxX] FILE [argument]" |
| #define dpkg_deb_full_usage "\n\n" \ |
| "Perform actions on Debian packages (.debs)\n" \ |
| "\nOptions:" \ |
| "\n -c List contents of filesystem tree" \ |
| "\n -e Extract control files to [argument] directory" \ |
| "\n -f Display control field name starting with [argument]" \ |
| "\n -x Extract packages filesystem tree to directory" \ |
| "\n -X Verbose extract" \ |
| |
| #define dpkg_deb_example_usage \ |
| "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" |
| |
| #define du_trivial_usage \ |
| "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." |
| #define du_full_usage "\n\n" \ |
| "Summarize disk space used for each FILE and/or directory.\n" \ |
| "Disk space is printed in units of " \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ |
| SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ |
| " bytes.\n" \ |
| "\nOptions:" \ |
| "\n -a Show file sizes too" \ |
| "\n -H Follow symlinks on command line" \ |
| "\n -L Follow all symlinks" \ |
| "\n -d N Limit output to directories (and files with -a) of depth < N" \ |
| "\n -c Show grand total" \ |
| "\n -l Count sizes many times if hard linked" \ |
| "\n -s Display only a total for each argument" \ |
| "\n -x Skip directories on different filesystems" \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \ |
| "\n -m Sizes in megabytes" \ |
| ) \ |
| "\n -k Sizes in kilobytes" \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \ |
| |
| #define du_example_usage \ |
| "$ du\n" \ |
| "16 ./CVS\n" \ |
| "12 ./kernel-patches/CVS\n" \ |
| "80 ./kernel-patches\n" \ |
| "12 ./tests/CVS\n" \ |
| "36 ./tests\n" \ |
| "12 ./scripts/CVS\n" \ |
| "16 ./scripts\n" \ |
| "12 ./docs/CVS\n" \ |
| "104 ./docs\n" \ |
| "2417 .\n" |
| |
| #define dumpkmap_trivial_usage \ |
| "> keymap" |
| #define dumpkmap_full_usage "\n\n" \ |
| "Print a binary keyboard translation table to standard output" |
| #define dumpkmap_example_usage \ |
| "$ dumpkmap > keymap\n" |
| |
| #define dumpleases_trivial_usage \ |
| "[-r|-a] [-f LEASEFILE]" |
| #define dumpleases_full_usage "\n\n" \ |
| "Display DHCP leases granted by udhcpd\n" \ |
| "\nOptions:" \ |
| USE_GETOPT_LONG( \ |
| "\n -f,--file=FILE Leases file to load" \ |
| "\n -r,--remaining Interpret lease times as time remaining" \ |
| "\n -a,--absolute Interpret lease times as expire time" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -f FILE Leases file to load" \ |
| "\n -r Interpret lease times as time remaining" \ |
| "\n -a Interpret lease times as expire time" \ |
| ) |
| |
| #define e2fsck_trivial_usage \ |
| "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ |
| "[-I inode_buffer_blocks] [-P process_inode_size] " \ |
| "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ |
| "[-E extended-options] device" |
| #define e2fsck_full_usage "\n\n" \ |
| "Check ext2/ext3 file system\n" \ |
| "\nOptions:" \ |
| "\n -p Automatic repair (no questions)" \ |
| "\n -n Make no changes to the filesystem" \ |
| "\n -y Assume 'yes' to all questions" \ |
| "\n -c Check for bad blocks and add them to the badblock list" \ |
| "\n -f Force checking even if filesystem is marked clean" \ |
| "\n -v Verbose" \ |
| "\n -b superblock Use alternative superblock" \ |
| "\n -B blocksize Force blocksize when looking for superblock" \ |
| "\n -j journal Set location of the external journal" \ |
| "\n -l file Add to badblocks list" \ |
| "\n -L file Set badblocks list" \ |
| |
| #define echo_trivial_usage \ |
| USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]" |
| #define echo_full_usage "\n\n" \ |
| "Print the specified ARGs to stdout" \ |
| USE_FEATURE_FANCY_ECHO( "\n" \ |
| "\nOptions:" \ |
| "\n -n Suppress trailing newline" \ |
| "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \ |
| "\n -E Disable interpretation of backslash-escaped characters" \ |
| ) |
| #define echo_example_usage \ |
| "$ echo \"Erik is cool\"\n" \ |
| "Erik is cool\n" \ |
| USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ |
| "Erik\n" \ |
| "is\n" \ |
| "cool\n" \ |
| "$ echo \"Erik\\nis\\ncool\"\n" \ |
| "Erik\\nis\\ncool\n") |
| |
| #define eject_trivial_usage \ |
| "[-t] [-T] [DEVICE]" |
| #define eject_full_usage "\n\n" \ |
| "Eject specified DEVICE (or default /dev/cdrom)\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_EJECT_SCSI( \ |
| "\n -s SCSI device" \ |
| ) \ |
| "\n -t Close tray" \ |
| "\n -T Open/close tray (toggle)" \ |
| |
| #define ed_trivial_usage "" |
| #define ed_full_usage "" |
| |
| #define env_trivial_usage \ |
| "[-iu] [-] [name=value]... [command]" |
| #define env_full_usage "\n\n" \ |
| "Print the current environment or run a program after setting\n" \ |
| "up the specified environment\n" \ |
| "\nOptions:" \ |
| "\n -, -i Start with an empty environment" \ |
| "\n -u Remove variable from the environment" \ |
| |
| #define ether_wake_trivial_usage \ |
| "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" |
| #define ether_wake_full_usage "\n\n" \ |
| "Send a magic packet to wake up sleeping machines.\n" \ |
| "MAC must be a station address (00:11:22:33:44:55) or\n" \ |
| "a hostname with a known 'ethers' entry.\n" \ |
| "\nOptions:" \ |
| "\n -b Send wake-up packet to the broadcast address" \ |
| "\n -i iface Interface to use (default eth0)" \ |
| "\n -p pass Append four or six byte password PW to the packet" \ |
| |
| #define expand_trivial_usage \ |
| "[-i] [-t NUM] [FILE|-]" |
| #define expand_full_usage "\n\n" \ |
| "Convert tabs to spaces, writing to standard output.\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_EXPAND_LONG_OPTIONS( \ |
| "\n -i,--initial Do not convert tabs after non blanks" \ |
| "\n -t,--tabs=N Tabstops every N chars" \ |
| ) \ |
| SKIP_FEATURE_EXPAND_LONG_OPTIONS( \ |
| "\n -i Do not convert tabs after non blanks" \ |
| "\n -t Tabstops every N chars" \ |
| ) |
| |
| #define expr_trivial_usage \ |
| "EXPRESSION" |
| #define expr_full_usage "\n\n" \ |
| "Print the value of EXPRESSION to standard output.\n" \ |
| "\n" \ |
| "EXPRESSION may be:\n" \ |
| " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ |
| " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ |
| " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \ |
| " ARG1 <= ARG2\n" \ |
| " ARG1 = ARG2\n" \ |
| " ARG1 != ARG2\n" \ |
| " ARG1 >= ARG2\n" \ |
| " ARG1 > ARG2\n" \ |
| " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \ |
| " ARG1 - ARG2\n" \ |
| " ARG1 * ARG2\n" \ |
| " ARG1 / ARG2\n" \ |
| " ARG1 % ARG2\n" \ |
| " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ |
| " match STRING REGEXP Same as STRING : REGEXP\n" \ |
| " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ |
| " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ |
| " length STRING Length of STRING\n" \ |
| " quote TOKEN Interpret TOKEN as a string, even if\n" \ |
| " it is a keyword like 'match' or an\n" \ |
| " operator like '/'\n" \ |
| " (EXPRESSION) Value of EXPRESSION\n" \ |
| "\n" \ |
| "Beware that many operators need to be escaped or quoted for shells.\n" \ |
| "Comparisons are arithmetic if both ARGs are numbers, else\n" \ |
| "lexicographical. Pattern matches return the string matched between\n" \ |
| "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ |
| "of characters matched or 0." |
| |
| #define fakeidentd_trivial_usage \ |
| "[-fiw] [-b ADDR] [STRING]" |
| #define fakeidentd_full_usage "\n\n" \ |
| "Provide fake ident (auth) service\n" \ |
| "\nOptions:" \ |
| "\n -f Run in foreground" \ |
| "\n -i Inetd mode" \ |
| "\n -w Inetd 'wait' mode" \ |
| "\n -b ADDR Bind to specified address" \ |
| "\n STRING Ident answer string (default is 'nobody')" \ |
| |
| #define false_trivial_usage \ |
| "" |
| #define false_full_usage "\n\n" \ |
| "Return an exit code of FALSE (1)" |
| |
| #define false_example_usage \ |
| "$ false\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define fbset_trivial_usage \ |
| "[options] [mode]" |
| #define fbset_full_usage "\n\n" \ |
| "Show and modify frame buffer settings" |
| |
| #define fbset_example_usage \ |
| "$ fbset\n" \ |
| "mode \"1024x768-76\"\n" \ |
| " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ |
| " geometry 1024 768 1024 768 16\n" \ |
| " timings 12714 128 32 16 4 128 4\n" \ |
| " accel false\n" \ |
| " rgba 5/11,6/5,5/0,0/0\n" \ |
| "endmode\n" |
| |
| #define fdflush_trivial_usage \ |
| "DEVICE" |
| #define fdflush_full_usage "\n\n" \ |
| "Force floppy disk drive to detect disk change" |
| |
| #define fdformat_trivial_usage \ |
| "[-n] DEVICE" |
| #define fdformat_full_usage "\n\n" \ |
| "Format floppy disk\n" \ |
| "\nOptions:" \ |
| "\n -n Don't verify after format" \ |
| |
| /* Looks like someone forgot to add this to config system */ |
| #ifndef ENABLE_FEATURE_FDISK_BLKSIZE |
| # define ENABLE_FEATURE_FDISK_BLKSIZE 0 |
| # define USE_FEATURE_FDISK_BLKSIZE(a) |
| #endif |
| |
| #define fdisk_trivial_usage \ |
| "[-ul" USE_FEATURE_FDISK_BLKSIZE("s") "] " \ |
| "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" |
| #define fdisk_full_usage "\n\n" \ |
| "Change partition table\n" \ |
| "\nOptions:" \ |
| "\n -u Start and End are in sectors (instead of cylinders)" \ |
| "\n -l Show partition table for each DISK, then exit" \ |
| USE_FEATURE_FDISK_BLKSIZE( \ |
| "\n -s Show partition sizes in kb for each DISK, then exit" \ |
| ) \ |
| "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \ |
| "\n -C CYLINDERS Set number of cylinders/heads/sectors" \ |
| "\n -H HEADS\n" \ |
| "\n -S SECTORS" \ |
| |
| #define fetchmail_trivial_usage \ |
| "[-w timeout] [-H [user:pass@]server[:port]] [-S] [-t] [-z] maildir [prog]" |
| #define fetchmail_full_usage "\n\n" \ |
| "Fetch content of remote mailbox to local maildir\n" \ |
| "\nOptions:" \ |
| "\n -w timeout Network timeout" \ |
| "\n -H [user:pass@]server[:port] Server" \ |
| "\n -S Use openssl connection helper for secure servers" \ |
| "\n -t Get only headers" \ |
| "\n -z Delete messages on server" \ |
| "\n prog Run 'prog <message_file>' on message delivery" \ |
| |
| #define blkid_trivial_usage \ |
| "" |
| #define blkid_full_usage "\n\n" \ |
| "Print UUIDs of all filesystems." |
| |
| #define findfs_trivial_usage \ |
| "LABEL=label or UUID=uuid" |
| #define findfs_full_usage "\n\n" \ |
| "Find a filesystem device based on a label or UUID." |
| #define findfs_example_usage \ |
| "$ findfs LABEL=MyDevice" |
| |
| #define find_trivial_usage \ |
| "[PATH...] [EXPRESSION]" |
| #define find_full_usage "\n\n" \ |
| "Search for files. The default PATH is the current directory,\n" \ |
| "default EXPRESSION is '-print'\n" \ |
| "\nEXPRESSION may consist of:" \ |
| "\n -follow Dereference symlinks" \ |
| USE_FEATURE_FIND_XDEV( \ |
| "\n -xdev Don't descend directories on other filesystems") \ |
| USE_FEATURE_FIND_MAXDEPTH( \ |
| "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \ |
| "\n tests/actions to command line arguments only") \ |
| "\n -name PATTERN File name (w/o directory name) matches PATTERN" \ |
| "\n -iname PATTERN Case insensitive -name" \ |
| USE_FEATURE_FIND_PATH( \ |
| "\n -path PATTERN Path matches PATTERN") \ |
| USE_FEATURE_FIND_REGEX( \ |
| "\n -regex PATTERN Path matches regex PATTERN") \ |
| USE_FEATURE_FIND_TYPE( \ |
| "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \ |
| USE_FEATURE_FIND_PERM( \ |
| "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \ |
| "\n or exactly (NNN)") \ |
| USE_FEATURE_FIND_MTIME( \ |
| "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \ |
| "\n or exactly (N) days") \ |
| USE_FEATURE_FIND_MMIN( \ |
| "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \ |
| "\n or exactly (N) minutes") \ |
| USE_FEATURE_FIND_NEWER( \ |
| "\n -newer FILE Modified time is more recent than FILE's") \ |
| USE_FEATURE_FIND_INUM( \ |
| "\n -inum N File has inode number N") \ |
| USE_FEATURE_FIND_USER( \ |
| "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \ |
| USE_FEATURE_FIND_GROUP( \ |
| "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \ |
| USE_FEATURE_FIND_DEPTH( \ |
| "\n -depth Process directory name after traversing it") \ |
| USE_FEATURE_FIND_SIZE( \ |
| "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \ |
| "\n +/-N: file size is bigger/smaller than N") \ |
| "\n -print Print (default and assumed)" \ |
| USE_FEATURE_FIND_PRINT0( \ |
| "\n -print0 Delimit output with null characters rather than" \ |
| "\n newlines") \ |
| USE_FEATURE_FIND_CONTEXT ( \ |
| "\n -context File has specified security context") \ |
| USE_FEATURE_FIND_EXEC( \ |
| "\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \ |
| "\n matching files") \ |
| USE_FEATURE_FIND_PRUNE( \ |
| "\n -prune Stop traversing current subtree") \ |
| USE_FEATURE_FIND_DELETE( \ |
| "\n -delete Delete files, turns on -depth option") \ |
| USE_FEATURE_FIND_PAREN( \ |
| "\n (EXPR) Group an expression") \ |
| |
| #define find_example_usage \ |
| "$ find / -name passwd\n" \ |
| "/etc/passwd\n" |
| |
| #define fold_trivial_usage \ |
| "[-bs] [-w WIDTH] [FILE]" |
| #define fold_full_usage "\n\n" \ |
| "Wrap input lines in each FILE (standard input by default), writing to\n" \ |
| "standard output\n" \ |
| "\nOptions:" \ |
| "\n -b Count bytes rather than columns" \ |
| "\n -s Break at spaces" \ |
| "\n -w Use WIDTH columns instead of 80" \ |
| |
| #define free_trivial_usage \ |
| "" |
| #define free_full_usage "\n\n" \ |
| "Display the amount of free and used system memory" |
| #define free_example_usage \ |
| "$ free\n" \ |
| " total used free shared buffers\n" \ |
| " Mem: 257628 248724 8904 59644 93124\n" \ |
| " Swap: 128516 8404 120112\n" \ |
| "Total: 386144 257128 129016\n" \ |
| |
| #define freeramdisk_trivial_usage \ |
| "DEVICE" |
| #define freeramdisk_full_usage "\n\n" \ |
| "Free all memory used by the specified ramdisk" |
| #define freeramdisk_example_usage \ |
| "$ freeramdisk /dev/ram2\n" |
| |
| #define fsck_trivial_usage \ |
| "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]" |
| #define fsck_full_usage "\n\n" \ |
| "Check and repair filesystems\n" \ |
| "\nOptions:" \ |
| "\n -A Walk /etc/fstab and check all filesystems" \ |
| "\n -N Don't execute, just show what would be done" \ |
| "\n -P With -A, check filesystems in parallel" \ |
| "\n -R With -A, skip the root filesystem" \ |
| "\n -T Don't show title on startup" \ |
| "\n -V Verbose" \ |
| "\n -C n Write status information to specified filedescriptor" \ |
| "\n -t type List of filesystem types to check" \ |
| |
| #define fsck_minix_trivial_usage \ |
| "[-larvsmf] /dev/name" |
| #define fsck_minix_full_usage "\n\n" \ |
| "Check MINIX filesystem\n" \ |
| "\nOptions:" \ |
| "\n -l List all filenames" \ |
| "\n -r Perform interactive repairs" \ |
| "\n -a Perform automatic repairs" \ |
| "\n -v Verbose" \ |
| "\n -s Output superblock information" \ |
| "\n -m Show \"mode not cleared\" warnings" \ |
| "\n -f Force file system check" \ |
| |
| #define ftpget_trivial_usage \ |
| "[options] remote-host local-file remote-file" |
| #define ftpget_full_usage "\n\n" \ |
| "Retrieve a remote file via FTP\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_FTPGETPUT_LONG_OPTIONS( \ |
| "\n -c,--continue Continue previous transfer" \ |
| "\n -v,--verbose Verbose" \ |
| "\n -u,--username Username" \ |
| "\n -p,--password Password" \ |
| "\n -P,--port Port number" \ |
| ) \ |
| SKIP_FEATURE_FTPGETPUT_LONG_OPTIONS( \ |
| "\n -c Continue previous transfer" \ |
| "\n -v Verbose" \ |
| "\n -u Username" \ |
| "\n -p Password" \ |
| "\n -P Port number" \ |
| ) |
| |
| #define ftpput_trivial_usage \ |
| "[options] remote-host remote-file local-file" |
| #define ftpput_full_usage "\n\n" \ |
| "Store a local file on a remote machine via FTP\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_FTPGETPUT_LONG_OPTIONS( \ |
| "\n -v,--verbose Verbose" \ |
| "\n -u,--username Username" \ |
| "\n -p,--password Password" \ |
| "\n -P,--port Port number" \ |
| ) \ |
| SKIP_FEATURE_FTPGETPUT_LONG_OPTIONS( \ |
| "\n -v Verbose" \ |
| "\n -u Username" \ |
| "\n -p Password" \ |
| "\n -P Port number" \ |
| ) |
| |
| #define fuser_trivial_usage \ |
| "[options] FILE or PORT/PROTO" |
| #define fuser_full_usage "\n\n" \ |
| "Find processes which use FILEs or PORTs\n" \ |
| "\nOptions:" \ |
| "\n -m Find processes which use same fs as FILEs" \ |
| "\n -4 Search only IPv4 space" \ |
| "\n -6 Search only IPv6 space" \ |
| "\n -s Silent: just exit with 0 if any processes are found" \ |
| "\n -k Kill found processes (otherwise display PIDs)" \ |
| "\n -SIGNAL Signal to send (default: TERM)" \ |
| |
| #define getenforce_trivial_usage NOUSAGE_STR |
| #define getenforce_full_usage "" |
| |
| #define getopt_trivial_usage \ |
| "[OPTIONS]..." |
| #define getopt_full_usage "\n\n" \ |
| "Parse command options\n" \ |
| USE_GETOPT_LONG( \ |
| "\n -a,--alternative Allow long options starting with single -" \ |
| "\n -l,--longoptions=longopts Long options to be recognized" \ |
| "\n -n,--name=progname The name under which errors are reported" \ |
| "\n -o,--options=optstring Short options to be recognized" \ |
| "\n -q,--quiet Disable error reporting by getopt(3)" \ |
| "\n -Q,--quiet-output No normal output" \ |
| "\n -s,--shell=shell Set shell quoting conventions" \ |
| "\n -T,--test Test for getopt(1) version" \ |
| "\n -u,--unquoted Don't quote the output" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -a Allow long options starting with single -" \ |
| "\n -l longopts Long options to be recognized" \ |
| "\n -n progname The name under which errors are reported" \ |
| "\n -o optstring Short options to be recognized" \ |
| "\n -q Disable error reporting by getopt(3)" \ |
| "\n -Q No normal output" \ |
| "\n -s shell Set shell quoting conventions" \ |
| "\n -T Test for getopt(1) version" \ |
| "\n -u Don't quote the output" \ |
| ) |
| #define getopt_example_usage \ |
| "$ cat getopt.test\n" \ |
| "#!/bin/sh\n" \ |
| "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ |
| " -n 'example.busybox' -- \"$@\"`\n" \ |
| "if [ $? != 0 ]; then exit 1; fi\n" \ |
| "eval set -- \"$GETOPT\"\n" \ |
| "while true; do\n" \ |
| " case $1 in\n" \ |
| " -a|--a-long) echo \"Option a\"; shift;;\n" \ |
| " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \ |
| " -c|--c-long)\n" \ |
| " case \"$2\" in\n" \ |
| " \"\") echo \"Option c, no argument\"; shift 2;;\n" \ |
| " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \ |
| " esac;;\n" \ |
| " --) shift; break;;\n" \ |
| " *) echo \"Internal error!\"; exit 1;;\n" \ |
| " esac\n" \ |
| "done\n" |
| |
| #define getsebool_trivial_usage \ |
| "-a or getsebool boolean..." |
| #define getsebool_full_usage "\n\n" \ |
| " -a Show all SELinux booleans" |
| |
| #define getty_trivial_usage \ |
| "[OPTIONS] BAUD_RATE TTY [TERMTYPE]" |
| #define getty_full_usage "\n\n" \ |
| "Open a tty, prompt for a login name, then invoke /bin/login\n" \ |
| "\nOptions:" \ |
| "\n -h Enable hardware (RTS/CTS) flow control" \ |
| "\n -i Do not display /etc/issue before running login" \ |
| "\n -L Local line, do not do carrier detect" \ |
| "\n -m Get baud rate from modem's CONNECT status message" \ |
| "\n -w Wait for a CR or LF before sending /etc/issue" \ |
| "\n -n Do not prompt the user for a login name" \ |
| "\n -f issue_file Display issue_file instead of /etc/issue" \ |
| "\n -l login_app Invoke login_app instead of /bin/login" \ |
| "\n -t timeout Terminate after timeout if no username is read" \ |
| "\n -I initstring Init string to send before anything else" \ |
| "\n -H login_host Log login_host into the utmp file as the hostname" \ |
| |
| #define grep_trivial_usage \ |
| "[-HhrilLnqvso" \ |
| USE_DESKTOP("w") \ |
| "eF" \ |
| USE_FEATURE_GREP_EGREP_ALIAS("E") \ |
| USE_FEATURE_GREP_CONTEXT("ABC") \ |
| "] PATTERN [FILEs...]" |
| #define grep_full_usage "\n\n" \ |
| "Search for PATTERN in each FILE or standard input\n" \ |
| "\nOptions:" \ |
| "\n -H Prefix output lines with filename where match was found" \ |
| "\n -h Suppress the prefixing filename on output" \ |
| "\n -r Recurse subdirectories" \ |
| "\n -i Ignore case distinctions" \ |
| "\n -l List names of files that match" \ |
| "\n -L List names of files that do not match" \ |
| "\n -n Print line number with output lines" \ |
| "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ |
| "\n -v Select non-matching lines" \ |
| "\n -s Suppress file open/read error messages" \ |
| "\n -c Only print count of matching lines" \ |
| "\n -o Show only the part of a line that matches PATTERN" \ |
| "\n -m MAX Match up to MAX times per file" \ |
| USE_DESKTOP( \ |
| "\n -w Match whole words only") \ |
| "\n -F PATTERN is a set of newline-separated strings" \ |
| USE_FEATURE_GREP_EGREP_ALIAS( \ |
| "\n -E PATTERN is an extended regular expression") \ |
| "\n -e PTRN Pattern to match" \ |
| "\n -f FILE Read pattern from file" \ |
| USE_FEATURE_GREP_CONTEXT( \ |
| "\n -A Print NUM lines of trailing context" \ |
| "\n -B Print NUM lines of leading context" \ |
| "\n -C Print NUM lines of output context") \ |
| |
| #define grep_example_usage \ |
| "$ grep root /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "$ grep ^[rR]oo. /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" |
| |
| #define egrep_trivial_usage NOUSAGE_STR |
| #define egrep_full_usage "" |
| |
| #define fgrep_trivial_usage NOUSAGE_STR |
| #define fgrep_full_usage "" |
| |
| #define gunzip_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define gunzip_full_usage "\n\n" \ |
| "Uncompress FILEs (or standard input)\n" \ |
| "\nOptions:" \ |
| "\n -c Write to standard output" \ |
| "\n -f Force" \ |
| "\n -t Test file integrity" \ |
| |
| #define gunzip_example_usage \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" |
| |
| #define gzip_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define gzip_full_usage "\n\n" \ |
| "Compress FILEs (or standard input)\n" \ |
| "\nOptions:" \ |
| "\n -c Write to standard output" \ |
| "\n -d Decompress" \ |
| "\n -f Force" \ |
| |
| #define gzip_example_usage \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ |
| "$ gzip /tmp/busybox.tar\n" \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" |
| |
| #define halt_trivial_usage \ |
| "[-d delay] [-n] [-f]" USE_FEATURE_WTMP(" [-w]") |
| #define halt_full_usage "\n\n" \ |
| "Halt the system\n" \ |
| "\nOptions:" \ |
| "\n -d Delay interval for halting" \ |
| "\n -n No call to sync()" \ |
| "\n -f Force halt (don't go through init)" \ |
| USE_FEATURE_WTMP( \ |
| "\n -w Only write a wtmp record" \ |
| ) |
| |
| #define hdparm_trivial_usage \ |
| "[options] [device] .." |
| #define hdparm_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -a Get/set fs readahead" \ |
| "\n -A Set drive read-lookahead flag (0/1)" \ |
| "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \ |
| "\n -B Set Advanced Power Management setting (1-255)" \ |
| "\n -c Get/set IDE 32-bit IO setting" \ |
| "\n -C Check IDE power mode status" \ |
| USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ |
| "\n -d Get/set using_dma flag") \ |
| "\n -D Enable/disable drive defect-mgmt" \ |
| "\n -f Flush buffer cache for device on exit" \ |
| "\n -g Display drive geometry" \ |
| "\n -h Display terse usage information" \ |
| USE_FEATURE_HDPARM_GET_IDENTITY( \ |
| "\n -i Display drive identification") \ |
| USE_FEATURE_HDPARM_GET_IDENTITY( \ |
| "\n -I Detailed/current information directly from drive") \ |
| "\n -k Get/set keep_settings_over_reset flag (0/1)" \ |
| "\n -K Set drive keep_features_over_reset flag (0/1)" \ |
| "\n -L Set drive doorlock (0/1) (removable harddisks only)" \ |
| "\n -m Get/set multiple sector count" \ |
| "\n -n Get/set ignore-write-errors flag (0/1)" \ |
| "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \ |
| "\n -P Set drive prefetch count" \ |
| /* "\n -q Change next setting quietly" - not supported ib bbox */ \ |
| "\n -Q Get/set DMA tagged-queuing depth (if supported)" \ |
| "\n -r Get/set readonly flag (DANGEROUS to set)" \ |
| USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ |
| "\n -R Register an IDE interface (DANGEROUS)") \ |
| "\n -S Set standby (spindown) timeout" \ |
| "\n -t Perform device read timings" \ |
| "\n -T Perform cache read timings" \ |
| "\n -u Get/set unmaskirq flag (0/1)" \ |
| USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ |
| "\n -U Un-register an IDE interface (DANGEROUS)") \ |
| "\n -v Defaults; same as -mcudkrag for IDE drives" \ |
| "\n -V Display program version and exit immediately" \ |
| USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ |
| "\n -w Perform device reset (DANGEROUS)") \ |
| "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \ |
| USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ |
| "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \ |
| "\n -X Set IDE xfer mode (DANGEROUS)" \ |
| "\n -y Put IDE drive in standby mode" \ |
| "\n -Y Put IDE drive to sleep" \ |
| "\n -Z Disable Seagate auto-powersaving mode" \ |
| "\n -z Re-read partition table" \ |
| |
| #define head_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define head_full_usage "\n\n" \ |
| "Print first 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n" \ |
| "\nOptions:" \ |
| "\n -n NUM Print first NUM lines instead of first 10" \ |
| USE_FEATURE_FANCY_HEAD( \ |
| "\n -c NUM Output the first NUM bytes" \ |
| "\n -q Never output headers giving file names" \ |
| "\n -v Always output headers giving file names") \ |
| |
| #define head_example_usage \ |
| "$ head -n 2 /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" |
| |
| #define hexdump_trivial_usage \ |
| "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..." |
| #define hexdump_full_usage "\n\n" \ |
| "Display file(s) or standard input in a user specified format\n" \ |
| "\nOptions:" \ |
| "\n -b One-byte octal display" \ |
| "\n -c One-byte character display" \ |
| "\n -C Canonical hex+ASCII, 16 bytes per line" \ |
| "\n -d Two-byte decimal display" \ |
| "\n -e FORMAT STRING" \ |
| "\n -f FORMAT FILE" \ |
| "\n -n LENGTH Interpret only LENGTH bytes of input" \ |
| "\n -o Two-byte octal display" \ |
| "\n -s OFFSET Skip OFFSET bytes" \ |
| "\n -v Display all input data" \ |
| "\n -x Two-byte hexadecimal display" \ |
| USE_FEATURE_HEXDUMP_REVERSE( \ |
| "\n -R Reverse of 'hexdump -Cv'") \ |
| |
| #define hd_trivial_usage \ |
| "FILE..." |
| #define hd_full_usage "\n\n" \ |
| "hd is an alias for hexdump -C" |
| |
| #define hostid_trivial_usage \ |
| "" |
| #define hostid_full_usage "\n\n" \ |
| "Print out a unique 32-bit identifier for the machine" |
| |
| #define hostname_trivial_usage \ |
| "[OPTION] [hostname | -F FILE]" |
| #define hostname_full_usage "\n\n" \ |
| "Get or set hostname or DNS domain name\n" \ |
| "\nOptions:" \ |
| "\n -s Short" \ |
| "\n -i Addresses for the hostname" \ |
| "\n -d DNS domain name" \ |
| "\n -f Fully qualified domain name" \ |
| "\n -F FILE Use the contents of FILE to specify the hostname" \ |
| |
| #define hostname_example_usage \ |
| "$ hostname\n" \ |
| "sage\n" |
| |
| #define httpd_trivial_usage \ |
| "[-c conffile]" \ |
| " [-p [ip:]port]" \ |
| " [-i] [-f] [-v[v]]" \ |
| USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \ |
| USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ |
| " [-h home]" \ |
| " [-d/-e string]" |
| #define httpd_full_usage "\n\n" \ |
| "Listen for incoming HTTP requests\n" \ |
| "\nOptions:" \ |
| "\n -c FILE Configuration file (default httpd.conf)" \ |
| "\n -p [IP:]PORT Bind to ip:port (default *:80)" \ |
| "\n -i Inetd mode" \ |
| "\n -f Do not daemonize" \ |
| "\n -v[v] Verbose" \ |
| USE_FEATURE_HTTPD_SETUID( \ |
| "\n -u USER[:GRP] Set uid/gid after binding to port") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH( \ |
| "\n -r REALM Authentication Realm for Basic Authentication") \ |
| USE_FEATURE_HTTPD_AUTH_MD5( \ |
| "\n -m PASS Crypt PASS with md5 algorithm") \ |
| "\n -h HOME Home directory (default .)" \ |
| "\n -e STRING HTML encode STRING" \ |
| "\n -d STRING URL decode STRING" \ |
| |
| #define hwclock_trivial_usage \ |
| USE_FEATURE_HWCLOCK_LONG_OPTIONS( \ |
| "[-r|--show] [-s|--hctosys] [-w|--systohc]" \ |
| " [-l|--localtime] [-u|--utc]" \ |
| " [-f FILE]" \ |
| ) \ |
| SKIP_FEATURE_HWCLOCK_LONG_OPTIONS( \ |
| "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \ |
| ) |
| #define hwclock_full_usage "\n\n" \ |
| "Query and set hardware clock (RTC)\n" \ |
| "\nOptions:" \ |
| "\n -r Show hardware clock time" \ |
| "\n -s Set system time from hardware clock" \ |
| "\n -w Set hardware clock to system time" \ |
| "\n -u Hardware clock is in UTC" \ |
| "\n -l Hardware clock is in local time" \ |
| "\n -f FILE Use specified device (e.g. /dev/rtc2)" \ |
| |
| #define id_trivial_usage \ |
| "[OPTIONS]... [USER]" |
| #define id_full_usage "\n\n" \ |
| "Print information about USER or the current user\n" \ |
| "\nOptions:" \ |
| USE_SELINUX( \ |
| "\n -Z Print the security context" \ |
| ) \ |
| "\n -u Print user ID" \ |
| "\n -g Print group ID" \ |
| "\n -G Print supplementary group IDs" \ |
| "\n -n Print name instead of a number" \ |
| "\n -r Print real user ID instead of effective ID" \ |
| |
| #define id_example_usage \ |
| "$ id\n" \ |
| "uid=1000(andersen) gid=1000(andersen)\n" |
| |
| #define ifconfig_trivial_usage \ |
| USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]" |
| #define ifconfig_full_usage "\n\n" \ |
| "Configure a network interface\n" \ |
| "\nOptions:" \ |
| "\n" \ |
| USE_FEATURE_IPV6( \ |
| " [add ADDRESS[/PREFIXLEN]]\n") \ |
| USE_FEATURE_IPV6( \ |
| " [del ADDRESS[/PREFIXLEN]]\n") \ |
| " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \ |
| " [netmask ADDRESS] [dstaddr ADDRESS]\n" \ |
| USE_FEATURE_IFCONFIG_SLIP( \ |
| " [outfill NN] [keepalive NN]\n") \ |
| " " USE_FEATURE_IFCONFIG_HW("[hw ether" USE_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \ |
| " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ |
| " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \ |
| USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ |
| " [mem_start NN] [io_addr NN] [irq NN]\n") \ |
| " [up|down] ..." |
| |
| #define ifenslave_trivial_usage \ |
| "[-cdf] master-iface <slave-iface...>" |
| #define ifenslave_full_usage "\n\n" \ |
| "Configure network interfaces for parallel routing\n" \ |
| "\nOptions:" \ |
| "\n -c, --change-active Change active slave" \ |
| "\n -d, --detach Remove slave interface from bonding device" \ |
| "\n -f, --force Force, even if interface is not Ethernet" \ |
| /* "\n -r, --receive-slave Create a receive-only slave" */ |
| |
| #define ifenslave_example_usage \ |
| "To create a bond device, simply follow these three steps :\n" \ |
| "- ensure that the required drivers are properly loaded :\n" \ |
| " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \ |
| "- assign an IP address to the bond device :\n" \ |
| " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \ |
| "- attach all the interfaces you need to the bond device :\n" \ |
| " # ifenslave bond0 eth0 eth1 eth2\n" \ |
| " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \ |
| " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \ |
| " To detach a dead interface without setting the bond device down :\n" \ |
| " # ifenslave -d bond0 eth1\n\n" \ |
| " To set the bond device down and automatically release all the slaves :\n" \ |
| " # ifconfig bond0 down\n\n" \ |
| " To change active slave :\n" \ |
| " # ifenslave -c bond0 eth0\n" \ |
| |
| #define ifup_trivial_usage \ |
| "[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..." |
| #define ifup_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -a De/configure all interfaces automatically" \ |
| "\n -i FILE Use FILE for interface definitions" \ |
| "\n -n Print out what would happen, but don't do it" \ |
| USE_FEATURE_IFUPDOWN_MAPPING( \ |
| "\n (note: doesn't disable mappings)" \ |
| "\n -m Don't run any mappings" \ |
| ) \ |
| "\n -v Print out what would happen before doing it" \ |
| "\n -f Force de/configuration" \ |
| |
| #define ifdown_trivial_usage \ |
| "[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..." |
| #define ifdown_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -a De/configure all interfaces automatically" \ |
| "\n -i FILE Use FILE for interface definitions" \ |
| "\n -n Print out what would happen, but don't do it" \ |
| USE_FEATURE_IFUPDOWN_MAPPING( \ |
| "\n (note: doesn't disable mappings)" \ |
| "\n -m Don't run any mappings" \ |
| ) \ |
| "\n -v Print out what would happen before doing it" \ |
| "\n -f Force de/configuration" \ |
| |
| #define inetd_trivial_usage \ |
| "[-fe] [-q N] [-R N] [CONFFILE]" |
| #define inetd_full_usage "\n\n" \ |
| "Listen for network connections and launch programs\n" \ |
| "\nOptions:" \ |
| "\n -f Run in foreground" \ |
| "\n -e Log to stderr" \ |
| "\n -q N Socket listen queue (default: 128)" \ |
| "\n -R N Pause services after N connects/min" \ |
| "\n (default: 0 - disabled)" \ |
| |
| #define init_trivial_usage \ |
| "" |
| #define init_full_usage "\n\n" \ |
| "Init is the parent of all processes" |
| |
| #define init_notes_usage \ |
| "This version of init is designed to be run only by the kernel.\n" \ |
| "\n" \ |
| "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ |
| "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ |
| "runlevels, use sysvinit.\n" \ |
| "\n" \ |
| "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ |
| "it has the following default behavior:\n" \ |
| "\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " ::askfirst:/bin/sh\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::restart:/sbin/init\n" \ |
| "\n" \ |
| "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ |
| "\n" \ |
| " tty2::askfirst:/bin/sh\n" \ |
| " tty3::askfirst:/bin/sh\n" \ |
| " tty4::askfirst:/bin/sh\n" \ |
| "\n" \ |
| "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ |
| "\n" \ |
| " <id>:<runlevels>:<action>:<process>\n" \ |
| "\n" \ |
| " <id>:\n" \ |
| "\n" \ |
| " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ |
| " The id field is used by BusyBox init to specify the controlling tty for\n" \ |
| " the specified process to run on. The contents of this field are\n" \ |
| " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ |
| " be unique, although if it isn't you may have strange results. If this\n" \ |
| " field is left blank, the controlling tty is set to the console. Also\n" \ |
| " note that if BusyBox detects that a serial console is in use, then only\n" \ |
| " entries whose controlling tty is either the serial console or /dev/null\n" \ |
| " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ |
| " stinkin' utmp.\n" \ |
| "\n" \ |
| " <runlevels>:\n" \ |
| "\n" \ |
| " The runlevels field is completely ignored.\n" \ |
| "\n" \ |
| " <action>:\n" \ |
| "\n" \ |
| " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ |
| " once, restart, ctrlaltdel, and shutdown.\n" \ |
| "\n" \ |
| " The available actions can be classified into two groups: actions\n" \ |
| " that are run only once, and actions that are re-run when the specified\n" \ |
| " process exits.\n" \ |
| "\n" \ |
| " Run only-once actions:\n" \ |
| "\n" \ |
| " 'sysinit' is the first item run on boot. init waits until all\n" \ |
| " sysinit actions are completed before continuing. Following the\n" \ |
| " completion of all sysinit actions, all 'wait' actions are run.\n" \ |
| " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ |
| " the specified task completes. 'once' actions are asynchronous,\n" \ |
| " therefore, init does not wait for them to complete. 'restart' is\n" \ |
| " the action taken to restart the init process. By default this should\n" \ |
| " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ |
| " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ |
| " actions are run when the system detects that someone on the system\n" \ |
| " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ |
| " wants to run 'reboot' at this point to cause the system to reboot.\n" \ |
| " Finally the 'shutdown' action specifies the actions to taken when\n" \ |
| " init is told to reboot. Unmounting filesystems and disabling swap\n" \ |
| " is a very good here.\n" \ |
| "\n" \ |
| " Run repeatedly actions:\n" \ |
| "\n" \ |
| " 'respawn' actions are run after the 'once' actions. When a process\n" \ |
| " started with a 'respawn' action exits, init automatically restarts\n" \ |
| " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ |
| " respawning out of control. The 'askfirst' actions acts just like\n" \ |
| " respawn, except that before running the specified process it\n" \ |
| " displays the line \"Please press Enter to activate this console.\"\n" \ |
| " and then waits for the user to press enter before starting the\n" \ |
| " specified process.\n" \ |
| "\n" \ |
| " Unrecognized actions (like initdefault) will cause init to emit an\n" \ |
| " error message, and then go along with its business. All actions are\n" \ |
| " run in the order they appear in /etc/inittab.\n" \ |
| "\n" \ |
| " <process>:\n" \ |
| "\n" \ |
| " Specifies the process to be executed and its command line.\n" \ |
| "\n" \ |
| "Example /etc/inittab file:\n" \ |
| "\n" \ |
| " # This is run first except when booting in single-user mode\n" \ |
| " #\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " \n" \ |
| " # /bin/sh invocations on selected ttys\n" \ |
| " #\n" \ |
| " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ |
| " ::askfirst:-/bin/sh\n" \ |
| " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ |
| " tty2::askfirst:-/bin/sh\n" \ |
| " tty3::askfirst:-/bin/sh\n" \ |
| " tty4::askfirst:-/bin/sh\n" \ |
| " \n" \ |
| " # /sbin/getty invocations for selected ttys\n" \ |
| " #\n" \ |
| " tty4::respawn:/sbin/getty 38400 tty4\n" \ |
| " tty5::respawn:/sbin/getty 38400 tty5\n" \ |
| " \n" \ |
| " \n" \ |
| " # Example of how to put a getty on a serial line (for a terminal)\n" \ |
| " #\n" \ |
| " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ |
| " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ |
| " #\n" \ |
| " # Example how to put a getty on a modem line\n" \ |
| " #::respawn:/sbin/getty 57600 ttyS2\n" \ |
| " \n" \ |
| " # Stuff to do when restarting the init process\n" \ |
| " ::restart:/sbin/init\n" \ |
| " \n" \ |
| " # Stuff to do before rebooting\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" |
| |
| #define inotifyd_trivial_usage \ |
| "/user/space/agent dir/or/file/being/watched[:mask] ..." |
| #define inotifyd_full_usage "\n\n" \ |
| "Spawn userspace agent on filesystem changes." \ |
| "\nWhen a filesystem event matching the mask occurs" \ |
| "\non specified file/directory an userspace agent is spawned" \ |
| "\nwith the parameters:" \ |
| "\n1. actual event(s)" \ |
| "\n2. file/directory name" \ |
| "\n3. name of subfile (if any), in case of watching a directory" \ |
| "\n" \ |
| "\n a File is accessed" \ |
| "\n c File is modified" \ |
| "\n e Metadata changed" \ |
| "\n w Writtable file is closed" \ |
| "\n 0 Unwrittable file is closed" \ |
| "\n r File is opened" \ |
| "\n m File is moved from X" \ |
| "\n y File is moved to Y" \ |
| "\n n Subfile is created" \ |
| "\n d Subfile is deleted" \ |
| "\n D Self is deleted" \ |
| "\n M Self is moved" \ |
| |
| #define insmod_trivial_usage \ |
| USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..." |
| #define insmod_full_usage "\n\n" \ |
| "Load the specified kernel modules into the kernel" \ |
| USE_FEATURE_2_4_MODULES( "\n" \ |
| "\nOptions:" \ |
| "\n -f Force module to load into the wrong kernel version" \ |
| "\n -k Make module autoclean-able" \ |
| "\n -v Verbose" \ |
| "\n -q Quiet" \ |
| "\n -L Lock to prevent simultaneous loads of a module" \ |
| USE_FEATURE_INSMOD_LOAD_MAP( \ |
| "\n -m Output load map to stdout" \ |
| ) \ |
| "\n -o NAME Set internal module name to NAME" \ |
| "\n -x Do not export externs" \ |
| ) |
| |
| /* -v, -b, -c are ignored */ |
| #define install_trivial_usage \ |
| "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory" |
| #define install_full_usage "\n\n" \ |
| "Copy files and set attributes\n" \ |
| "\nOptions:" \ |
| "\n -c Just copy (default)" \ |
| "\n -d Create directories" \ |
| "\n -D Create leading target directories" \ |
| "\n -s Strip symbol table" \ |
| "\n -p Preserve date" \ |
| "\n -o USER Set ownership" \ |
| "\n -g GRP Set group ownership" \ |
| "\n -m MODE Set permissions" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| /* would need to make the " | " optional depending on more than one selected: */ |
| #define ip_trivial_usage \ |
| "[OPTIONS] {" \ |
| USE_FEATURE_IP_ADDRESS("address | ") \ |
| USE_FEATURE_IP_ROUTE("route | ") \ |
| USE_FEATURE_IP_LINK("link | ") \ |
| USE_FEATURE_IP_TUNNEL("tunnel | ") \ |
| USE_FEATURE_IP_RULE("rule") \ |
| "} {COMMAND}" |
| #define ip_full_usage "\n\n" \ |
| "ip [OPTIONS] OBJECT {COMMAND}\n" \ |
| "where OBJECT := {" \ |
| USE_FEATURE_IP_ADDRESS("address | ") \ |
| USE_FEATURE_IP_ROUTE("route | ") \ |
| USE_FEATURE_IP_LINK("link | ") \ |
| USE_FEATURE_IP_TUNNEL("tunnel | ") \ |
| USE_FEATURE_IP_RULE("rule") \ |
| "}\n" \ |
| "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \ |
| |
| #define ipaddr_trivial_usage \ |
| "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ |
| " [dev STRING] [to PREFIX] }" |
| #define ipaddr_full_usage "\n\n" \ |
| "ipaddr {add|delete} IFADDR dev STRING\n" \ |
| "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \ |
| " [to PREFIX] [label PATTERN]\n" \ |
| " IFADDR := PREFIX | ADDR peer PREFIX\n" \ |
| " [broadcast ADDR] [anycast ADDR]\n" \ |
| " [label STRING] [scope SCOPE-ID]\n" \ |
| " SCOPE-ID := [host | link | global | NUMBER]" \ |
| |
| #define ipcalc_trivial_usage \ |
| "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]" |
| #define ipcalc_full_usage "\n\n" \ |
| "Calculate IP network settings from a IP address\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_IPCALC_LONG_OPTIONS( \ |
| "\n -b,--broadcast Display calculated broadcast address" \ |
| "\n -n,--network Display calculated network address" \ |
| "\n -m,--netmask Display default netmask for IP" \ |
| USE_FEATURE_IPCALC_FANCY( \ |
| "\n -p,--prefix Display the prefix for IP/NETMASK" \ |
| "\n -h,--hostname Display first resolved host name" \ |
| "\n -s,--silent Don't ever display error messages" \ |
| ) \ |
| ) \ |
| SKIP_FEATURE_IPCALC_LONG_OPTIONS( \ |
| "\n -b Display calculated broadcast address" \ |
| "\n -n Display calculated network address" \ |
| "\n -m Display default netmask for IP" \ |
| USE_FEATURE_IPCALC_FANCY( \ |
| "\n -p Display the prefix for IP/NETMASK" \ |
| "\n -h Display first resolved host name" \ |
| "\n -s Don't ever display error messages" \ |
| ) \ |
| ) |
| |
| #define ipcrm_trivial_usage \ |
| "[-MQS key] [-mqs id]" |
| #define ipcrm_full_usage "\n\n" \ |
| "Upper-case options MQS remove an object by shmkey value.\n" \ |
| "Lower-case options remove an object by shmid value.\n" \ |
| "\nOptions:" \ |
| "\n -mM Remove memory segment after last detach" \ |
| "\n -qQ Remove message queue" \ |
| "\n -sS Remove semaphore" \ |
| |
| #define ipcs_trivial_usage \ |
| "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" |
| #define ipcs_full_usage "\n\n" \ |
| " -i Show specific resource" \ |
| "\nResource specification:" \ |
| "\n -m Shared memory segments" \ |
| "\n -q Message queues" \ |
| "\n -s Semaphore arrays" \ |
| "\n -a All (default)" \ |
| "\nOutput format:" \ |
| "\n -t Time" \ |
| "\n -c Creator" \ |
| "\n -p Pid" \ |
| "\n -l Limits" \ |
| "\n -u Summary" \ |
| |
| #define iplink_trivial_usage \ |
| "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }" |
| #define iplink_full_usage "\n\n" \ |
| "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ |
| " dynamic { on | off } |\n" \ |
| " mtu MTU }\n" \ |
| "iplink show [DEVICE]" \ |
| |
| #define iproute_trivial_usage \ |
| "{ list | flush | { add | del | change | append |\n" \ |
| " replace | monitor } ROUTE }" |
| #define iproute_full_usage "\n\n" \ |
| "iproute { list | flush } SELECTOR\n" \ |
| "iproute get ADDRESS [from ADDRESS iif STRING]\n" \ |
| " [oif STRING] [tos TOS]\n" \ |
| "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ |
| " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ |
| " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \ |
| " [metric METRIC]" \ |
| |
| #define iprule_trivial_usage \ |
| "{[list | add | del] RULE}" |
| #define iprule_full_usage "\n\n" \ |
| "iprule [list | add | del] SELECTOR ACTION\n" \ |
| " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \ |
| " [dev STRING] [pref NUMBER]\n" \ |
| " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \ |
| " [prohibit | reject | unreachable]\n" \ |
| " [realms [SRCREALM/]DSTREALM]\n" \ |
| " TABLE_ID := [local | main | default | NUMBER]" \ |
| |
| #define iptunnel_trivial_usage \ |
| "{ add | change | del | show } [NAME]\n" \ |
| " [mode { ipip | gre | sit }]\n" \ |
| " [remote ADDR] [local ADDR] [ttl TTL]" |
| #define iptunnel_full_usage "\n\n" \ |
| "iptunnel { add | change | del | show } [NAME]\n" \ |
| " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \ |
| " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ |
| " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \ |
| |
| #define kbd_mode_trivial_usage \ |
| "[-a|k|s|u]" |
| #define kbd_mode_full_usage "\n\n" \ |
| "Report or set the keyboard mode\n" \ |
| "\nOptions set mode:" \ |
| "\n -a Default (ASCII)" \ |
| "\n -k Medium-raw (keyboard)" \ |
| "\n -s Raw (scancode)" \ |
| "\n -u Unicode (utf-8)" \ |
| |
| #define kill_trivial_usage \ |
| "[-l] [-signal] process-id..." |
| #define kill_full_usage "\n\n" \ |
| "Send a signal (default is TERM) to the specified process(es)\n" \ |
| "\nOptions:" \ |
| "\n -l List all signal names and numbers" \ |
| |
| #define kill_example_usage \ |
| "$ ps | grep apache\n" \ |
| "252 root root S [apache]\n" \ |
| "263 www-data www-data S [apache]\n" \ |
| "264 www-data www-data S [apache]\n" \ |
| "265 www-data www-data S [apache]\n" \ |
| "266 www-data www-data S [apache]\n" \ |
| "267 www-data www-data S [apache]\n" \ |
| "$ kill 252\n" |
| |
| #define killall_trivial_usage \ |
| "[-l] [-q] [-signal] process-name..." |
| #define killall_full_usage "\n\n" \ |
| "Send a signal (default is TERM) to the specified process(es)\n" \ |
| "\nOptions:" \ |
| "\n -l List all signal names and numbers" \ |
| "\n -q Do not complain if no processes were killed" \ |
| |
| #define killall_example_usage \ |
| "$ killall apache\n" |
| |
| #define killall5_trivial_usage \ |
| "[-l] [-signal]" |
| #define killall5_full_usage "\n\n" \ |
| "Send a signal (default is TERM) to all processes outside current session\n" \ |
| "\nOptions:" \ |
| "\n -l List all signal names and numbers" \ |
| |
| #define klogd_trivial_usage \ |
| "[-c N] [-n]" |
| #define klogd_full_usage "\n\n" \ |
| "Kernel logger\n" \ |
| "\nOptions:" \ |
| "\n -c N Only messages with level < N are printed to console" \ |
| "\n -n Run in foreground" \ |
| |
| #define length_trivial_usage \ |
| "STRING" |
| #define length_full_usage "\n\n" \ |
| "Print STRING's length" |
| |
| #define length_example_usage \ |
| "$ length Hello\n" \ |
| "5\n" |
| |
| #define less_trivial_usage \ |
| "[-EMNmh~I?] [FILE...]" |
| #define less_full_usage "\n\n" \ |
| "View a file or list of files. The position within files can be\n" \ |
| "changed, and files can be manipulated in various ways.\n" \ |
| "\nOptions:" \ |
| "\n -E Quit once the end of a file is reached" \ |
| "\n -M,-m Display a status line containing the line numbers" \ |
| "\n and percentage through the file" \ |
| "\n -N Prefix line numbers to each line" \ |
| "\n -I Ignore case in all searches" \ |
| "\n -~ Suppress ~s displayed past the end of the file" \ |
| |
| #define linux32_trivial_usage NOUSAGE_STR |
| #define linux32_full_usage "" |
| #define linux64_trivial_usage NOUSAGE_STR |
| #define linux64_full_usage "" |
| |
| #define linuxrc_trivial_usage NOUSAGE_STR |
| #define linuxrc_full_usage "" |
| |
| #define setarch_trivial_usage \ |
| "personality program [args...]" |
| #define setarch_full_usage "\n\n" \ |
| "Personality may be:\n" \ |
| " linux32 Set 32bit uname emulation\n" \ |
| " linux64 Set 64bit uname emulation" \ |
| |
| #define ln_trivial_usage \ |
| "[OPTION] TARGET... LINK_NAME|DIRECTORY" |
| #define ln_full_usage "\n\n" \ |
| "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ |
| "Use '--' to indicate that all following arguments are non-options.\n" \ |
| "\nOptions:" \ |
| "\n -s Make symlinks instead of hardlinks" \ |
| "\n -f Remove existing destination files" \ |
| "\n -n Don't dereference symlinks - treat like normal file" \ |
| "\n -b Make a backup of the target (if exists) before link operation" \ |
| "\n -S suf Use suffix instead of ~ when making backup files" \ |
| |
| #define ln_example_usage \ |
| "$ ln -s BusyBox /tmp/ls\n" \ |
| "$ ls -l /tmp/ls\n" \ |
| "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" |
| |
| #define load_policy_trivial_usage NOUSAGE_STR |
| |
| #define load_policy_full_usage "" |
| |
| #define loadfont_trivial_usage \ |
| "< font" |
| #define loadfont_full_usage "\n\n" \ |
| "Load a console font from standard input" |
| #define loadfont_example_usage \ |
| "$ loadfont < /etc/i18n/fontname\n" |
| |
| #define loadkmap_trivial_usage \ |
| "< keymap" |
| #define loadkmap_full_usage "\n\n" \ |
| "Load a binary keyboard translation table from standard input" |
| #define loadkmap_example_usage \ |
| "$ loadkmap < /etc/i18n/lang-keymap\n" |
| |
| #define logger_trivial_usage \ |
| "[OPTION]... [MESSAGE]" |
| #define logger_full_usage "\n\n" \ |
| "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \ |
| "\nOptions:" \ |
| "\n -s Log to stderr as well as the system log" \ |
| "\n -t TAG Log using the specified tag (defaults to user name)" \ |
| "\n -p PRIO Priority (numeric or facility.level pair)" \ |
| |
| #define logger_example_usage \ |
| "$ logger \"hello\"\n" |
| |
| #define login_trivial_usage \ |
| "[-p] [-h HOST] [[-f] USER]" |
| #define login_full_usage "\n\n" \ |
| "Begin a new session on the system\n" \ |
| "\nOptions:" \ |
| "\n -f Do not authenticate (user already authenticated)" \ |
| "\n -h Name of the remote host" \ |
| "\n -p Preserve environment" \ |
| |
| #define logname_trivial_usage \ |
| "" |
| #define logname_full_usage "\n\n" \ |
| "Print the name of the current user" |
| #define logname_example_usage \ |
| "$ logname\n" \ |
| "root\n" |
| |
| #define logread_trivial_usage \ |
| "[OPTION]..." |
| #define logread_full_usage "\n\n" \ |
| "Show messages in syslogd's circular buffer\n" \ |
| "\nOptions:" \ |
| "\n -f Output data as log grows" \ |
| |
| #define losetup_trivial_usage \ |
| "[-o OFS] LOOPDEV FILE - associate loop devices\n" \ |
| " losetup -d LOOPDEV - disassociate\n" \ |
| " losetup [-f] - show" |
| #define losetup_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -o OFS Start OFS bytes into FILE" \ |
| "\n -f Show first free loop device" \ |
| |
| #define losetup_notes_usage \ |
| "No arguments will display all current associations.\n" \ |
| "One argument (losetup /dev/loop1) will display the current association\n" \ |
| "(if any), or disassociate it (with -d). The display shows the offset\n" \ |
| "and filename of the file the loop device is currently bound to.\n\n" \ |
| "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ |
| "with an optional offset (-o 12345). Encryption is not yet supported.\n" \ |
| "losetup -f will show the first loop free loop device\n\n" |
| |
| #define lpd_trivial_usage \ |
| "SPOOLDIR [HELPER [ARGS...]]" |
| #define lpd_full_usage "\n\n" \ |
| "SPOOLDIR must contain (symlinks to) device nodes or directories" \ |
| "\nwith names matching print queue names. In the first case, jobs are" \ |
| "\nsent directly to the device. Otherwise each job is stored in queue" \ |
| "\ndirectory and HELPER program is called. Name of file to print" \ |
| "\nis passed in $DATAFILE variable." \ |
| "\nExample:" \ |
| "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \ |
| |
| #define lpq_trivial_usage \ |
| "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]" |
| #define lpq_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -P lp service to connect to (else uses $PRINTER)" \ |
| "\n -d Delete jobs" \ |
| "\n -f Force any waiting job to be printed" \ |
| "\n -s Short display" \ |
| |
| #define lpr_trivial_usage \ |
| "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE...]" |
| /* -C CLASS exists too, not shown. |
| * CLASS is supposed to be printed on banner page, if one is requested */ |
| #define lpr_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -P lp service to connect to (else uses $PRINTER)"\ |
| "\n -m Send mail on completion" \ |
| "\n -h Print banner page too" \ |
| "\n -V Verbose" \ |
| |
| #define ls_trivial_usage \ |
| "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \ |
| USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \ |
| USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \ |
| USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \ |
| USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \ |
| USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \ |
| USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ |
| USE_SELINUX("K") "] [filenames...]" |
| #define ls_full_usage "\n\n" \ |
| "List directory contents\n" \ |
| "\nOptions:" \ |
| "\n -1 List in a single column" \ |
| "\n -A Don't list . and .." \ |
| "\n -a Don't hide entries starting with ." \ |
| "\n -C List by columns" \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -c With -l: sort by ctime") \ |
| USE_FEATURE_LS_COLOR( \ |
| "\n --color[={always,never,auto}] Control coloring") \ |
| "\n -d List directory entries instead of contents" \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -e List full date and time") \ |
| USE_FEATURE_LS_FILETYPES( \ |
| "\n -F Append indicator (one of */=@|) to entries") \ |
| "\n -i List inode numbers" \ |
| "\n -l Long listing format" \ |
| "\n -n List numeric UIDs and GIDs instead of names" \ |
| USE_FEATURE_LS_FILETYPES( \ |
| "\n -p Append indicator (one of /=@|) to entries") \ |
| USE_FEATURE_LS_FOLLOWLINKS( \ |
| "\n -L List entries pointed to by symlinks") \ |
| USE_FEATURE_LS_RECURSIVE( \ |
| "\n -R List subdirectories recursively") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -r Sort in reverse order") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -S Sort by file size") \ |
| "\n -s List the size of each file, in blocks" \ |
| USE_FEATURE_AUTOWIDTH( \ |
| "\n -T NUM Assume tabstop every NUM columns") \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -t With -l: sort by modification time") \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -u With -l: sort by access time") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -v Sort by version") \ |
| USE_FEATURE_AUTOWIDTH( \ |
| "\n -w NUM Assume the terminal is NUM columns wide") \ |
| "\n -x List by lines" \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -X Sort by extension") \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n -h List sizes in human readable format (1K 243M 2G)") \ |
| USE_SELINUX( \ |
| "\n -k List security context") \ |
| USE_SELINUX( \ |
| "\n -K List security context in long format") \ |
| USE_SELINUX( \ |
| "\n -Z List security context and permission") \ |
| |
| #define lsattr_trivial_usage \ |
| "[-Radlv] [files...]" |
| #define lsattr_full_usage "\n\n" \ |
| "List file attributes on an ext2 fs\n" \ |
| "\nOptions:" \ |
| "\n -R Recursively list subdirectories" \ |
| "\n -a Do not hide entries starting with ." \ |
| "\n -d List directory entries instead of contents" \ |
| "\n -l List long flag names" \ |
| "\n -v List the file's version/generation number" \ |
| |
| #define lsmod_trivial_usage \ |
| "" |
| #define lsmod_full_usage "\n\n" \ |
| "List the currently loaded kernel modules" |
| |
| #if ENABLE_FEATURE_MAKEDEVS_LEAF |
| #define makedevs_trivial_usage \ |
| "NAME TYPE MAJOR MINOR FIRST LAST [s]" |
| #define makedevs_full_usage "\n\n" \ |
| "Create a range of block or character special files" \ |
| "\n" \ |
| "\nTYPE is:" \ |
| "\n b Block device" \ |
| "\n c Character device" \ |
| "\n f FIFO, MAJOR and MINOR are ignored" \ |
| "\n" \ |
| "\nFIRST..LAST specify numbers appended to NAME." \ |
| "\nIf 's' is the last argument, the base device is created as well." \ |
| "\n" \ |
| "\nExamples:" \ |
| "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \ |
| "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" |
| #define makedevs_example_usage \ |
| "# makedevs /dev/ttyS c 4 66 2 63\n" \ |
| "[creates ttyS2-ttyS63]\n" \ |
| "# makedevs /dev/hda b 3 0 0 8 s\n" \ |
| "[creates hda,hda1-hda8]\n" |
| #endif |
| |
| #if ENABLE_FEATURE_MAKEDEVS_TABLE |
| #define makedevs_trivial_usage \ |
| "[-d device_table] rootdir" |
| #define makedevs_full_usage "\n\n" \ |
| "Create a range of special files as specified in a device table.\n" \ |
| "Device table entries take the form of:\n" \ |
| "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \ |
| "Where name is the file name, type can be one of:\n" \ |
| " f Regular file\n" \ |
| " d Directory\n" \ |
| " c Character device\n" \ |
| " b Block device\n" \ |
| " p Fifo (named pipe)\n" \ |
| "uid is the user id for the target file, gid is the group id for the\n" \ |
| "target file. The rest of the entries (major, minor, etc) apply to\n" \ |
| "to device special files. A '-' may be used for blank entries." |
| #define makedevs_example_usage \ |
| "For example:\n" \ |
| "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \ |
| "/dev d 755 0 0 - - - - -\n" \ |
| "/dev/console c 666 0 0 5 1 - - -\n" \ |
| "/dev/null c 666 0 0 1 3 0 0 -\n" \ |
| "/dev/zero c 666 0 0 1 5 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 0 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ |
| "Will Produce:\n" \ |
| "/dev\n" \ |
| "/dev/console\n" \ |
| "/dev/null\n" \ |
| "/dev/zero\n" \ |
| "/dev/hda\n" \ |
| "/dev/hda[0-15]\n" |
| #endif |
| |
| #define man_trivial_usage \ |
| "[OPTION]... [MANPAGE]..." |
| #define man_full_usage "\n\n" \ |
| "Format and display manual page\n" \ |
| "\nOptions:" \ |
| "\n -a Display all pages" \ |
| "\n -w Show page locations" \ |
| |
| #define matchpathcon_trivial_usage \ |
| "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" |
| #define matchpathcon_full_usage "\n\n" \ |
| " -n Do not display path" \ |
| "\n -N Do not use translations" \ |
| "\n -f Use alternate file_context file" \ |
| "\n -p Use prefix to speed translations" \ |
| "\n -V Verify file context on disk matches defaults" \ |
| |
| #define md5sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") |
| #define md5sum_full_usage "\n\n" \ |
| "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ |
| "\nOptions:" \ |
| "\n -c Check MD5 sums against given list" \ |
| "\n -s Don't output anything, status code shows success" \ |
| "\n -w Warn about improperly formatted MD5 checksum lines") \ |
| |
| #define md5sum_example_usage \ |
| "$ md5sum < busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003\n" \ |
| "$ md5sum busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "$ md5sum -c -\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "busybox: OK\n" \ |
| "^D\n" |
| |
| #define mdev_trivial_usage \ |
| "[-s]" |
| #define mdev_full_usage "\n\n" \ |
| " -s Scan /sys and populate /dev during system boot\n" \ |
| "\n" \ |
| "Called with no options (via hotplug) it uses environment variables\n" \ |
| "to determine which device to add/remove." |
| |
| #define mdev_notes_usage "" \ |
| USE_FEATURE_MDEV_CONFIG( \ |
| "The mdev config file contains lines that look like:\n" \ |
| " hd[a-z][0-9]* 0:3 660\n\n" \ |
| "That's device name (with regex match), uid:gid, and permissions.\n\n" \ |
| USE_FEATURE_MDEV_EXEC( \ |
| "Optionally, that can be followed (on the same line) by a special character\n" \ |
| "and a command line to run after creating/before deleting the corresponding\n" \ |
| "device(s). The environment variable $MDEV indicates the active device node\n" \ |
| "(which is useful if it's a regex match). For example:\n\n" \ |
| " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ |
| "The special characters are @ (run after creating), $ (run before deleting),\n" \ |
| "and * (run both after creating and before deleting). The commands run in\n" \ |
| "the /dev directory, and use system() which calls /bin/sh.\n\n" \ |
| ) \ |
| "Config file parsing stops on the first matching line. If no config\n" \ |
| "entry is matched, devices are created with default 0:0 660. (Make\n" \ |
| "the last line match .* to override this.)\n\n" \ |
| ) |
| |
| #define mesg_trivial_usage \ |
| "[y|n]" |
| #define mesg_full_usage "\n\n" \ |
| "Control write access to your terminal\n" \ |
| " y Allow write access to your terminal\n" \ |
| " n Disallow write access to your terminal" |
| |
| #define microcom_trivial_usage \ |
| "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY" |
| #define microcom_full_usage "\n\n" \ |
| "Copy bytes for stdin to TTY and from TTY to stdout\n" \ |
| "\nOptions:" \ |
| "\n -d Wait up to DELAY ms for TTY output before sending every" \ |
| "\n next byte to it" \ |
| "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \ |
| "\n -s Set serial line to SPEED" \ |
| "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \ |
| |
| #define mkdir_trivial_usage \ |
| "[OPTION] DIRECTORY..." |
| #define mkdir_full_usage "\n\n" \ |
| "Create DIRECTORY\n" \ |
| "\nOptions:" \ |
| "\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \ |
| "\n -p No error if existing, make parent directories as needed" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mkdir_example_usage \ |
| "$ mkdir /tmp/foo\n" \ |
| "$ mkdir /tmp/foo\n" \ |
| "/tmp/foo: File exists\n" \ |
| "$ mkdir /tmp/foo/bar/baz\n" \ |
| "/tmp/foo/bar/baz: No such file or directory\n" \ |
| "$ mkdir -p /tmp/foo/bar/baz\n" |
| |
| #define mke2fs_trivial_usage \ |
| "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ |
| "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ |
| "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ |
| "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ |
| "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ |
| "device [blocks-count]" |
| #define mke2fs_full_usage "\n\n" \ |
| " -b size Block size in bytes" \ |
| "\n -c Check for bad blocks before creating" \ |
| "\n -E opts Set extended options" \ |
| "\n -f size Fragment size in bytes" \ |
| "\n -F Force (ignore sanity checks)" \ |
| "\n -g num Number of blocks in a block group" \ |
| "\n -i ratio The bytes/inode ratio" \ |
| "\n -j Create a journal (ext3)" \ |
| "\n -J opts Set journal options (size/device)" \ |
| "\n -l file Read bad blocks list from file" \ |
| "\n -L lbl Set the volume label" \ |
| "\n -m percent Percent of fs blocks to reserve for admin" \ |
| "\n -M dir Set last mounted directory" \ |
| "\n -n Do not actually create anything" \ |
| "\n -N num Number of inodes to create" \ |
| "\n -o os Set the 'creator os' field" \ |
| "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" \ |
| "\n -q Quiet" \ |
| "\n -r rev Set filesystem revision" \ |
| "\n -S Write superblock and group descriptors only" \ |
| "\n -T fs-type Set usage type (news/largefile/largefile4)" \ |
| "\n -v Verbose" \ |
| |
| #define mkfifo_trivial_usage \ |
| "[OPTIONS] name" |
| #define mkfifo_full_usage "\n\n" \ |
| "Create named pipe (identical to 'mknod name p')\n" \ |
| "\nOptions:" \ |
| "\n -m MODE Mode (default a=rw)" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mkfs_minix_trivial_usage \ |
| "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" |
| #define mkfs_minix_full_usage "\n\n" \ |
| "Make a MINIX filesystem\n" \ |
| "\nOptions:" \ |
| "\n -c Check device for bad blocks" \ |
| "\n -n [14|30] Maximum length of filenames" \ |
| "\n -i INODES Number of inodes for the filesystem" \ |
| "\n -l FILENAME Read bad blocks list from FILENAME" \ |
| "\n -v Make version 2 filesystem" \ |
| |
| #define mknod_trivial_usage \ |
| "[OPTIONS] NAME TYPE MAJOR MINOR" |
| #define mknod_full_usage "\n\n" \ |
| "Create a special file (block, character, or pipe)\n" \ |
| "\nOptions:" \ |
| "\n -m Create the special file using the specified mode (default a=rw)" \ |
| "\nTYPEs include:" \ |
| "\n b: Make a block device" \ |
| "\n c or u: Make a character device" \ |
| "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mknod_example_usage \ |
| "$ mknod /dev/fd0 b 2 0\n" \ |
| "$ mknod -m 644 /tmp/pipe p\n" |
| |
| #define mkswap_trivial_usage \ |
| "DEVICE" |
| #define mkswap_full_usage "\n\n" \ |
| "Prepare block device to be used as swap partition" |
| #if 0 |
| "[-c] [-v0|-v1] DEVICE [BLOCKS]" |
| "\nOptions:" |
| "\n -c Check for readability" |
| "\n -v0 Make swap version 0 (max 128M)" |
| "\n -v1 Make swap version 1 (default for kernels > 2.1.117)" |
| "\n BLOCKS Number of blocks to use (default is entire partition)" |
| #endif |
| |
| #define mktemp_trivial_usage \ |
| "[-dt] [-p DIR] [TEMPLATE]" |
| #define mktemp_full_usage "\n\n" \ |
| "Create a temporary file with name based on TEMPLATE and print its name.\n" \ |
| "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \ |
| "\nOptions:" \ |
| "\n -d Make a directory instead of a file" \ |
| /* "\n -q Fail silently if an error occurs" - we ignore it */ \ |
| "\n -t Generate a path rooted in temporary directory" \ |
| "\n -p DIR Use DIR as a temporary directory (implies -t)" \ |
| "\n" \ |
| "\nFor -t or -p, directory is chosen as follows:" \ |
| "\n$TMPDIR if set, else -p DIR, else /tmp" \ |
| |
| #define mktemp_example_usage \ |
| "$ mktemp /tmp/temp.XXXXXX\n" \ |
| "/tmp/temp.mWiLjM\n" \ |
| "$ ls -la /tmp/temp.mWiLjM\n" \ |
| "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" |
| |
| #define modprobe_trivial_usage \ |
| "[-knqrsv] MODULE [symbol=value...]" |
| #define modprobe_full_usage "\n\n" \ |
| "Options:" \ |
| USE_FEATURE_2_4_MODULES( \ |
| "\n -k Make module autoclean-able" \ |
| ) \ |
| "\n -n Dry run" \ |
| "\n -q Quiet" \ |
| "\n -r Remove module (stacks) or do autoclean" \ |
| "\n -s Report via syslog instead of stderr" \ |
| "\n -v Verbose" \ |
| USE_FEATURE_MODPROBE_BLACKLIST( \ |
| "\n -b Apply blacklist to module names too" \ |
| ) |
| |
| #define modprobe_notes_usage \ |
| "modprobe can (un)load a stack of modules, passing each module options (when\n" \ |
| "loading). modprobe uses a configuration file to determine what option(s) to\n" \ |
| "pass each module it loads.\n" \ |
| "\n" \ |
| "The configuration file is searched (in order) amongst:\n" \ |
| "\n" \ |
| " /etc/modprobe.conf (2.6 only)\n" \ |
| " /etc/modules.conf\n" \ |
| " /etc/conf.modules (deprecated)\n" \ |
| "\n" \ |
| "They all have the same syntax (see below). If none is present, it is\n" \ |
| "_not_ an error; each loaded module is then expected to load without\n" \ |
| "options. Once a file is found, the others are tested for.\n" \ |
| "\n" \ |
| "/etc/modules.conf entry format:\n" \ |
| "\n" \ |
| " alias <alias_name> <mod_name>\n" \ |
| " Makes it possible to modprobe alias_name, when there is no such module.\n" \ |
| " It makes sense if your mod_name is long, or you want a more representative\n" \ |
| " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ |
| " This makes it also possible to use a different set of options (below) for\n" \ |
| " the module and the alias.\n" \ |
| " A module can be aliased more than once.\n" \ |
| "\n" \ |
| " options <mod_name|alias_name> <symbol=value...>\n" \ |
| " When loading module mod_name (or the module aliased by alias_name), pass\n" \ |
| " the \"symbol=value\" pairs as option to that module.\n" \ |
| "\n" \ |
| "Sample /etc/modules.conf file:\n" \ |
| "\n" \ |
| " options tulip irq=3\n" \ |
| " alias tulip tulip2\n" \ |
| " options tulip2 irq=4 io=0x308\n" \ |
| "\n" \ |
| "Other functionality offered by 'classic' modprobe is not available in\n" \ |
| "this implementation.\n" \ |
| "\n" \ |
| "If module options are present both in the config file, and on the command line,\n" \ |
| "then the options from the command line will be passed to the module _after_\n" \ |
| "the options from the config file. That way, you can have defaults in the config\n" \ |
| "file, and override them for a specific usage from the command line.\n" |
| #define modprobe_example_usage \ |
| "(with the above /etc/modules.conf):\n\n" \ |
| "$ modprobe tulip\n" \ |
| " will load the module 'tulip' with default option 'irq=3'\n\n" \ |
| "$ modprobe tulip irq=5\n" \ |
| " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ |
| "$ modprobe tulip2\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ |
| " which are the default for alias 'tulip2'\n\n" \ |
| "$ modprobe tulip2 irq=8\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ |
| " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ |
| " from the command line\n\n" \ |
| "$ modprobe tulip2 irq=2 io=0x210\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ |
| " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ |
| " from the command line\n" |
| |
| #define more_trivial_usage \ |
| "[FILE...]" |
| #define more_full_usage "\n\n" \ |
| "View FILE or standard input one screenful at a time" |
| |
| #define more_example_usage \ |
| "$ dmesg | more\n" |
| |
| #define mount_trivial_usage \ |
| "[flags] DEVICE NODE [-o options,more-options]" |
| #define mount_full_usage "\n\n" \ |
| "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \ |
| "\nOptions:" \ |
| "\n -a Mount all filesystems in fstab" \ |
| USE_FEATURE_MOUNT_FAKE( \ |
| "\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \ |
| ) \ |
| USE_FEATURE_MTAB_SUPPORT( \ |
| "\n -n Don't update /etc/mtab" \ |
| ) \ |
| "\n -r Read-only mount" \ |
| "\n -t fs-type Filesystem type" \ |
| "\n -w Read-write mount (default)" \ |
| "\n" \ |
| "-o option:\n" \ |
| USE_FEATURE_MOUNT_LOOP( \ |
| " loop Ignored (loop devices are autodetected)\n" \ |
| ) \ |
| USE_FEATURE_MOUNT_FLAGS( \ |
| " [a]sync Writes are asynchronous / synchronous\n" \ |
| " [no]atime Disable / enable updates to inode access times\n" \ |
| " [no]diratime Disable / enable atime updates to directories\n" \ |
| " [no]relatime Disable / enable atime updates relative to modification time\n" \ |
| " [no]dev Allow use of special device files / disallow them\n" \ |
| " [no]exec Allow use of executable files / disallow them\n" \ |
| " [no]suid Allow set-user-id-root programs / disallow them\n" \ |
| " [r]shared Convert [recursively] to a shared subtree\n" \ |
| " [r]slave Convert [recursively] to a slave subtree\n" \ |
| " [r]private Convert [recursively] to a private subtree\n" \ |
| " [un]bindable Make mount point [un]able to be bind mounted\n" \ |
| " bind Bind a directory to an additional location\n" \ |
| " move Relocate an existing mount point\n" \ |
| ) \ |
| " remount Remount a mounted filesystem, changing its flags\n" \ |
| " ro/rw Mount for read-only / read-write\n" \ |
| "\n" \ |
| "There are EVEN MORE flags that are specific to each filesystem\n" \ |
| "You'll have to see the written documentation for those filesystems" \ |
| |
| #define mount_example_usage \ |
| "$ mount\n" \ |
| "/dev/hda3 on / type minix (rw)\n" \ |
| "proc on /proc type proc (rw)\n" \ |
| "devpts on /dev/pts type devpts (rw)\n" \ |
| "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ |
| "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ |
| "$ mount cd_image.iso mydir\n" |
| #define mount_notes_usage \ |
| "Returns 0 for success, number of failed mounts for -a, or errno for one mount." |
| |
| #define mountpoint_trivial_usage \ |
| "[-q] <[-d] DIR | -x DEVICE>" |
| #define mountpoint_full_usage "\n\n" \ |
| "mountpoint checks if the directory is a mountpoint\n" \ |
| "\nOptions:" \ |
| "\n -q Quiet" \ |
| "\n -d Print major/minor device number of the filesystem" \ |
| "\n -x Print major/minor device number of the blockdevice" \ |
| |
| #define mountpoint_example_usage \ |
| "$ mountpoint /proc\n" \ |
| "/proc is not a mountpoint\n" \ |
| "$ mountpoint /sys\n" \ |
| "/sys is a mountpoint\n" |
| |
| #define mt_trivial_usage \ |
| "[-f device] opcode value" |
| #define mt_full_usage "\n\n" \ |
| "Control magnetic tape drive operation\n" \ |
| "\n" \ |
| "Available Opcodes:\n" \ |
| "\n" \ |
| "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ |
| "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ |
| "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ |
| "setpart tell unload unlock weof wset" \ |
| |
| #define mv_trivial_usage \ |
| "[OPTION]... SOURCE DEST\n" \ |
| "or: mv [OPTION]... SOURCE... DIRECTORY" |
| #define mv_full_usage "\n\n" \ |
| "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \ |
| "\nOptions:" \ |
| "\n -f Don't prompt before overwriting" \ |
| "\n -i Interactive, prompt before overwrite" \ |
| |
| #define mv_example_usage \ |
| "$ mv /tmp/foo /bin/bar\n" |
| |
| #define nameif_trivial_usage \ |
| "[-s] [-c FILE] [{IFNAME MACADDR}]" |
| #define nameif_full_usage "\n\n" \ |
| "Rename network interface while it in the down state\n" \ |
| "\nOptions:" \ |
| "\n -c FILE Use configuration file (default is /etc/mactab)" \ |
| "\n -s Use syslog (LOCAL0 facility)" \ |
| "\n IFNAME MACADDR new_interface_name interface_mac_address" \ |
| |
| #define nameif_example_usage \ |
| "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ |
| " or\n" \ |
| "$ nameif -c /etc/my_mactab_file\n" \ |
| |
| #if !ENABLE_DESKTOP |
| |
| #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA |
| #define NC_OPTIONS_STR "\n\nOptions:" |
| #else |
| #define NC_OPTIONS_STR |
| #endif |
| |
| #define nc_trivial_usage \ |
| USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \ |
| "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]") |
| #define nc_full_usage "\n\n" \ |
| "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ |
| NC_OPTIONS_STR \ |
| USE_NC_EXTRA( \ |
| "\n -e Exec rest of command line after connect" \ |
| "\n -i SECS Delay interval for lines sent" \ |
| "\n -w SECS Timeout for connect" \ |
| "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ |
| ) \ |
| USE_NC_SERVER( \ |
| "\n -l Listen mode, for inbound connects" \ |
| USE_NC_EXTRA( \ |
| "\n (use -l twice with -e for persistent server)") \ |
| "\n -p PORT Local port number" \ |
| ) |
| |
| #define nc_notes_usage "" \ |
| USE_NC_EXTRA( \ |
| "To use netcat as a terminal emulator on a serial port:\n\n" \ |
| "$ stty 115200 -F /dev/ttyS0\n" \ |
| "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ |
| ) |
| |
| #define nc_example_usage \ |
| "$ nc foobar.somedomain.com 25\n" \ |
| "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ |
| "help\n" \ |
| "214-Commands supported:\n" \ |
| "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ |
| "214 NOOP QUIT RSET HELP\n" \ |
| "quit\n" \ |
| "221 foobar closing connection\n" |
| |
| #else /* DESKTOP nc - much more compatible with nc 1.10 */ |
| |
| #define nc_trivial_usage \ |
| "[-options] hostname port - connect" \ |
| USE_NC_SERVER("\n" \ |
| "nc [-options] -l -p port [hostname] [port] - listen") |
| #define nc_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -e prog [args] Program to exec after connect (must be last)" \ |
| USE_NC_SERVER( \ |
| "\n -l Listen mode, for inbound connects" \ |
| ) \ |
| "\n -n Don't do DNS resolution" \ |
| "\n -s addr Local address" \ |
| "\n -p port Local port" \ |
| "\n -u UDP mode" \ |
| "\n -v Verbose (cumulative: -vv)" \ |
| "\n -w secs Timeout for connects and final net reads" \ |
| USE_NC_EXTRA( \ |
| "\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \ |
| "\n -o file Hex dump of traffic" \ |
| "\n -z Zero-I/O mode (scanning)" \ |
| ) \ |
| /* "\n -r Randomize local and remote ports" */ |
| /* "\n -g gateway Source-routing hop point[s], up to 8" */ |
| /* "\n -G num Source-routing pointer: 4, 8, 12, ..." */ |
| /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */ |
| |
| #endif |
| |
| #define netstat_trivial_usage \ |
| "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")USE_FEATURE_NETSTAT_PRG("p")"]" |
| #define netstat_full_usage "\n\n" \ |
| "Display networking information\n" \ |
| "\nOptions:" \ |
| "\n -l Display listening server sockets" \ |
| "\n -a Display all sockets (default: connected)" \ |
| "\n -e Display other/more information" \ |
| "\n -n Don't resolve names" \ |
| "\n -t Tcp sockets" \ |
| "\n -u Udp sockets" \ |
| "\n -w Raw sockets" \ |
| "\n -x Unix sockets" \ |
| "\n -r Display routing table" \ |
| USE_FEATURE_NETSTAT_WIDE( \ |
| "\n -W Display with no column truncation" \ |
| ) \ |
| USE_FEATURE_NETSTAT_PRG( \ |
| "\n -p Display PID/Program name for sockets" \ |
| ) |
| |
| #define nice_trivial_usage \ |
| "[-n ADJUST] [COMMAND [ARG]...]" |
| #define nice_full_usage "\n\n" \ |
| "Run a program with modified scheduling priority\n" \ |
| "\nOptions:" \ |
| "\n -n ADJUST Adjust the scheduling priority by ADJUST" \ |
| |
| #define nmeter_trivial_usage \ |
| "format_string" |
| #define nmeter_full_usage "\n\n" \ |
| "Monitor system in real time\n\n" \ |
| "Format specifiers:\n" \ |
| "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \ |
| " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \ |
| "%[niface] Monitor network interface 'iface'\n" \ |
| "%m Monitor allocated memory\n" \ |
| "%[mf] Monitor free memory\n" \ |
| "%[mt] Monitor total memory\n" \ |
| "%s Monitor allocated swap\n" \ |
| "%f Monitor number of used file descriptors\n" \ |
| "%Ni Monitor total/specific IRQ rate\n" \ |
| "%x Monitor context switch rate\n" \ |
| "%p Monitor forks\n" \ |
| "%[pn] Monitor # of processes\n" \ |
| "%b Monitor block io\n" \ |
| "%Nt Show time (with N decimal points)\n" \ |
| "%Nd Milliseconds between updates (default=1000)\n" \ |
| "%r Print <cr> instead of <lf> at EOL" \ |
| |
| #define nmeter_example_usage \ |
| "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" |
| |
| #define nohup_trivial_usage \ |
| "COMMAND [ARGS]" |
| #define nohup_full_usage "\n\n" \ |
| "Run a command immune to hangups, with output to a non-tty" |
| #define nohup_example_usage \ |
| "$ nohup make &" |
| |
| #define nslookup_trivial_usage \ |
| "[HOST] [SERVER]" |
| #define nslookup_full_usage "\n\n" \ |
| "Query the nameserver for the IP address of the given HOST\n" \ |
| "optionally using a specified DNS server" |
| #define nslookup_example_usage \ |
| "$ nslookup localhost\n" \ |
| "Server: default\n" \ |
| "Address: default\n" \ |
| "\n" \ |
| "Name: debian\n" \ |
| "Address: 127.0.0.1\n" |
| |
| #define od_trivial_usage \ |
| "[-aBbcDdeFfHhIiLlOovXx] " USE_DESKTOP("[-t TYPE] ") "[FILE]" |
| #define od_full_usage "\n\n" \ |
| "Write an unambiguous representation, octal bytes by default, of FILE\n" \ |
| "to standard output. With no FILE or when FILE is -, read standard input." |
| |
| #define openvt_trivial_usage \ |
| "[-c NUM] [-sw] [COMMAND [ARGS]]" |
| #define openvt_full_usage "\n\n" \ |
| "Start COMMAND on a new virtual terminal\n" \ |
| "\nOptions:" \ |
| "\n -c Use specified VT" \ |
| "\n -s Switch to the VT" \ |
| /* "\n -l Run COMMAND as login shell (by prepending '-')" */ \ |
| "\n -w Wait for COMMAND to exit" \ |
| |
| #define openvt_example_usage \ |
| "openvt 2 /bin/ash\n" |
| |
| #define parse_trivial_usage \ |
| "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..." |
| #define parse_full_usage "\n\n" \ |
| "[-n maxtokens] [-m mintokens] [-d delims] [-f flags] file ..." |
| |
| #define passwd_trivial_usage \ |
| "[OPTION] [name]" |
| #define passwd_full_usage "\n\n" \ |
| "Change user's password. If no name is specified,\n" \ |
| "changes the password for the current user.\n" \ |
| "\nOptions:" \ |
| "\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \ |
| "\n -d Delete password for the account" \ |
| "\n -l Lock (disable) account" \ |
| "\n -u Unlock (re-enable) account" \ |
| |
| #define chpasswd_trivial_usage \ |
| USE_GETOPT_LONG("[--md5|--encrypted]") SKIP_GETOPT_LONG("[-m|-e]") |
| #define chpasswd_full_usage "\n\n" \ |
| "Read user:password information from stdin " \ |
| "and update /etc/passwd accordingly.\n" \ |
| "\nOptions:" \ |
| USE_GETOPT_LONG( \ |
| "\n -e,--encrypted Supplied passwords are in encrypted form" \ |
| "\n -m,--md5 Use MD5 encryption instead of DES" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -e Supplied passwords are in encrypted form" \ |
| "\n -m Use MD5 encryption instead of DES" \ |
| ) |
| |
| #define patch_trivial_usage \ |
| "[-p NUM] [-i DIFF] [-R]" |
| #define patch_full_usage "\n\n" \ |
| " -p NUM Strip NUM leading components from file names" \ |
| "\n -i DIFF Read DIFF instead of stdin" \ |
| "\n -R Reverse patch" \ |
| |
| #define patch_example_usage \ |
| "$ patch -p1 < example.diff\n" \ |
| "$ patch -p0 -i example.diff" |
| |
| #define pgrep_trivial_usage \ |
| "[-flnovx] pattern" |
| #define pgrep_full_usage "\n\n" \ |
| "Display process(es) selected by regex pattern\n" \ |
| "\nOptions:" \ |
| "\n -l Show command name too" \ |
| "\n -f Match against entire command line" \ |
| "\n -n Show the newest process only" \ |
| "\n -o Show the oldest process only" \ |
| "\n -v Negate the matching" \ |
| "\n -x Match whole name (not substring)" \ |
| |
| #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) |
| #define pidof_trivial_usage \ |
| "[OPTION] [NAME...]" |
| #define USAGE_PIDOF "\n\nOptions:" |
| #else |
| #define pidof_trivial_usage \ |
| "[NAME...]" |
| #define USAGE_PIDOF /* none */ |
| #endif |
| #define pidof_full_usage "\n\n" \ |
| "List PIDs of all processes with names that match NAMEs" \ |
| USAGE_PIDOF \ |
| USE_FEATURE_PIDOF_SINGLE( \ |
| "\n -s Show only one PID") \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "\n -o PID Omit given pid" \ |
| "\n Use %PPID to omit pid of pidof's parent") \ |
| |
| #define pidof_example_usage \ |
| "$ pidof init\n" \ |
| "1\n" \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "$ pidof /bin/sh\n20351 5973 5950\n") \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "$ pidof /bin/sh -o %PPID\n20351 5950") |
| |
| #if !ENABLE_FEATURE_FANCY_PING |
| #define ping_trivial_usage \ |
| "host" |
| #define ping_full_usage "\n\n" \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" |
| #define ping6_trivial_usage \ |
| "host" |
| #define ping6_full_usage "\n\n" \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping_trivial_usage \ |
| "[OPTION]... host" |
| #define ping_full_usage "\n\n" \ |
| "Send ICMP ECHO_REQUEST packets to network hosts\n" \ |
| "\nOptions:" \ |
| "\n -4, -6 Force IPv4 or IPv6 hostname resolution" \ |
| "\n -c CNT Send only CNT pings" \ |
| "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ |
| "\n -I iface/IP Use interface or IP address as source" \ |
| "\n -W timeout Seconds to wait for the first response (default:10)" \ |
| "\n (after all -c CNT packets are sent)" \ |
| "\n -w deadline Seconds until ping exits (default:infinite)" \ |
| "\n (can exit earlier with -c CNT)" \ |
| "\n -q Quiet, only displays output at start" \ |
| "\n and when finished" \ |
| |
| #define ping6_trivial_usage \ |
| "[OPTION]... host" |
| #define ping6_full_usage "\n\n" \ |
| "Send ICMP ECHO_REQUEST packets to network hosts\n" \ |
| "\nOptions:" \ |
| "\n -c CNT Send only CNT pings" \ |
| "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ |
| "\n -I iface/IP Use interface or IP address as source" \ |
| "\n -q Quiet, only displays output at start" \ |
| "\n and when finished" \ |
| |
| #endif |
| #define ping_example_usage \ |
| "$ ping localhost\n" \ |
| "PING slag (127.0.0.1): 56 data bytes\n" \ |
| "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ |
| "\n" \ |
| "--- debian ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| #define ping6_example_usage \ |
| "$ ping6 ip6-localhost\n" \ |
| "PING ip6-localhost (::1): 56 data bytes\n" \ |
| "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ |
| "\n" \ |
| "--- ip6-localhost ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #define pipe_progress_trivial_usage NOUSAGE_STR |
| #define pipe_progress_full_usage "" |
| |
| #define pivot_root_trivial_usage \ |
| "NEW_ROOT PUT_OLD" |
| #define pivot_root_full_usage "\n\n" \ |
| "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ |
| "the new root file system" |
| |
| #define pkill_trivial_usage \ |
| "[-l] | [-fnovx] [-signal] pattern" |
| #define pkill_full_usage "\n\n" \ |
| "Send a signal to process(es) selected by regex pattern\n" \ |
| "\nOptions:" \ |
| "\n -l List all signals" \ |
| "\n -f Match against entire command line" \ |
| "\n -n Signal the newest process only" \ |
| "\n -o Signal the oldest process only" \ |
| "\n -v Negate the matching" \ |
| "\n -x Match whole name (not substring)" \ |
| |
| #define poweroff_trivial_usage \ |
| "[-d delay] [-n] [-f]" |
| #define poweroff_full_usage "\n\n" \ |
| "Halt and shut off power\n" \ |
| "\nOptions:" \ |
| "\n -d Delay interval for halting" \ |
| "\n -n No call to sync()" \ |
| "\n -f Force power off (don't go through init)" \ |
| |
| #define printenv_trivial_usage \ |
| "[VARIABLES...]" |
| #define printenv_full_usage "\n\n" \ |
| "Print all or part of environment.\n" \ |
| "If no environment VARIABLE specified, print them all." |
| |
| #define printf_trivial_usage \ |
| "FORMAT [ARGUMENT...]" |
| #define printf_full_usage "\n\n" \ |
| "Format and print ARGUMENT(s) according to FORMAT,\n" \ |
| "where FORMAT controls the output exactly as in C printf" |
| #define printf_example_usage \ |
| "$ printf \"Val=%d\\n\" 5\n" \ |
| "Val=5\n" |
| |
| |
| #if ENABLE_DESKTOP |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage "\n\n" \ |
| "Report process status\n" \ |
| "\nOptions:" \ |
| "\n -o col1,col2=header Select columns for display" \ |
| |
| #else /* !ENABLE_DESKTOP */ |
| |
| #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE |
| #define USAGE_PS "\nThis version of ps accepts no options" |
| #else |
| #define USAGE_PS "\nOptions:" |
| #endif |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage "\n\n" \ |
| "Report process status\n" \ |
| USAGE_PS \ |
| USE_SELINUX( \ |
| "\n -Z Show SE Linux context" \ |
| ) \ |
| USE_FEATURE_PS_WIDE( \ |
| "\n w Wide output" \ |
| ) |
| |
| #endif /* ENABLE_DESKTOP */ |
| |
| #define ps_example_usage \ |
| "$ ps\n" \ |
| " PID Uid Gid State Command\n" \ |
| " 1 root root S init\n" \ |
| " 2 root root S [kflushd]\n" \ |
| " 3 root root S [kupdate]\n" \ |
| " 4 root root S [kpiod]\n" \ |
| " 5 root root S [kswapd]\n" \ |
| " 742 andersen andersen S [bash]\n" \ |
| " 743 andersen andersen S -bash\n" \ |
| " 745 root root S [getty]\n" \ |
| " 2990 andersen andersen R ps\n" \ |
| |
| #define pscan_trivial_usage \ |
| "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" |
| #define pscan_full_usage "\n\n" \ |
| "Scan a host, print all open ports\n" \ |
| "\nOptions:" \ |
| "\n -c Show closed ports too" \ |
| "\n -b Show blocked ports too" \ |
| "\n -p Scan from this port (default 1)" \ |
| "\n -P Scan up to this port (default 1024)" \ |
| "\n -t Timeout (default 5000 ms)" \ |
| "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \ |
| |
| #define pwd_trivial_usage \ |
| "" |
| #define pwd_full_usage "\n\n" \ |
| "Print the full filename of the current working directory" |
| #define pwd_example_usage \ |
| "$ pwd\n" \ |
| "/root\n" |
| |
| #define raidautorun_trivial_usage \ |
| "DEVICE" |
| #define raidautorun_full_usage "\n\n" \ |
| "Tell the kernel to automatically search and start RAID arrays" |
| #define raidautorun_example_usage \ |
| "$ raidautorun /dev/md0" |
| |
| #define rdate_trivial_usage \ |
| "[-sp] HOST" |
| #define rdate_full_usage "\n\n" \ |
| "Get and possibly set the system date and time from a remote HOST\n" \ |
| "\nOptions:" \ |
| "\n -s Set the system date and time (default)" \ |
| "\n -p Print the date and time" \ |
| |
| #define rdev_trivial_usage \ |
| "" |
| #define rdev_full_usage "\n\n" \ |
| "Print the device node associated with the filesystem mounted at '/'" |
| #define rdev_example_usage \ |
| "$ rdev\n" \ |
| "/dev/mtdblock9 /\n" |
| |
| #define readahead_trivial_usage \ |
| "[FILE]..." |
| #define readahead_full_usage "\n\n" \ |
| "Preload FILE(s) in RAM cache so that subsequent reads for those" \ |
| "files do not block on disk I/O" |
| |
| #define readlink_trivial_usage \ |
| USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" |
| #define readlink_full_usage "\n\n" \ |
| "Display the value of a symlink" \ |
| USE_FEATURE_READLINK_FOLLOW( "\n" \ |
| "\nOptions:" \ |
| "\n -f Canonicalize by following all symlinks") \ |
| |
| #define readprofile_trivial_usage \ |
| "[OPTIONS]..." |
| #define readprofile_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -m mapfile (Default: /boot/System.map)" \ |
| "\n -p profile (Default: /proc/profile)" \ |
| "\n -M mult Set the profiling multiplier to mult" \ |
| "\n -i Print only info about the sampling step" \ |
| "\n -v Verbose" \ |
| "\n -a Print all symbols, even if count is 0" \ |
| "\n -b Print individual histogram-bin counts" \ |
| "\n -s Print individual counters within functions" \ |
| "\n -r Reset all the counters (root only)" \ |
| "\n -n Disable byte order auto-detection" \ |
| |
| #define realpath_trivial_usage \ |
| "pathname..." |
| #define realpath_full_usage "\n\n" \ |
| "Return the absolute pathnames of given argument" |
| |
| #define reboot_trivial_usage \ |
| "[-d delay] [-n] [-f]" |
| #define reboot_full_usage "\n\n" \ |
| "Reboot the system\n" \ |
| "\nOptions:" \ |
| "\n -d Delay interval for rebooting" \ |
| "\n -n No call to sync()" \ |
| "\n -f Force reboot (don't go through init)" \ |
| |
| #define renice_trivial_usage \ |
| "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" |
| #define renice_full_usage "\n\n" \ |
| "Change priority of running processes\n" \ |
| "\nOptions:" \ |
| "\n -n Adjust current nice value (smaller is faster)" \ |
| "\n -p Process id(s) (default)" \ |
| "\n -g Process group id(s)" \ |
| "\n -u Process user name(s) and/or id(s)" \ |
| |
| #define reset_trivial_usage \ |
| "" |
| #define reset_full_usage "\n\n" \ |
| "Reset the screen" |
| |
| #define resize_trivial_usage \ |
| "" |
| #define resize_full_usage "\n\n" \ |
| "Resize the screen" |
| |
| #define restorecon_trivial_usage \ |
| "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]" |
| #define restorecon_full_usage "\n\n" \ |
| "Reset security contexts of files in pathname\n" \ |
| "\n -i Ignore files that do not exist" \ |
| "\n -f file File with list of files to process. Use - for stdin" \ |
| "\n -e directory Directory to exclude" \ |
| "\n -R,-r Recurse directories" \ |
| "\n -n Don't change any file labels" \ |
| "\n -o file Save list of files with incorrect context" \ |
| "\n -v Verbose" \ |
| "\n -vv Show changed labels" \ |
| "\n -F Force reset of context to match file_context" \ |
| "\n for customizable files, or the user section," \ |
| "\n if it has changed" \ |
| |
| #define rm_trivial_usage \ |
| "[OPTION]... FILE..." |
| #define rm_full_usage "\n\n" \ |
| "Remove (unlink) the FILE(s). Use '--' to\n" \ |
| "indicate that all following arguments are non-options.\n" \ |
| "\nOptions:" \ |
| "\n -i Always prompt before removing" \ |
| "\n -f Never prompt" \ |
| "\n -r,-R Remove directories recursively" \ |
| |
| #define rm_example_usage \ |
| "$ rm -rf /tmp/foo\n" |
| |
| #define rmdir_trivial_usage \ |
| "[OPTION]... DIRECTORY..." |
| #define rmdir_full_usage "\n\n" \ |
| "Remove the DIRECTORY, if it is empty.\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_RMDIR_LONG_OPTIONS( \ |
| "\n -p|--parents Include parents" \ |
| "\n -ignore-fail-on-non-empty" \ |
| ) \ |
| SKIP_FEATURE_RMDIR_LONG_OPTIONS( \ |
| "\n -p Include parents" \ |
| ) |
| |
| #define rmdir_example_usage \ |
| "# rmdir /tmp/foo\n" |
| |
| #define rmmod_trivial_usage \ |
| "[OPTION]... [MODULE]..." |
| #define rmmod_full_usage "\n\n" \ |
| "Unload the specified kernel modules from the kernel\n" \ |
| "\nOptions:" \ |
| "\n -w Wait until the module is no longer used" \ |
| "\n -f Force unloading" \ |
| "\n -a Remove all unused modules (recursively)" \ |
| |
| #define rmmod_example_usage \ |
| "$ rmmod tulip\n" |
| |
| #define route_trivial_usage \ |
| "[{add|del|delete}]" |
| #define route_full_usage "\n\n" \ |
| "Edit kernel routing tables\n" \ |
| "\nOptions:" \ |
| "\n -n Don't resolve names" \ |
| "\n -e Display other/more information" \ |
| "\n -A inet" USE_FEATURE_IPV6("{6}") " Select address family" \ |
| |
| #define rpm_trivial_usage \ |
| "-i -q[ildc]p package.rpm" |
| #define rpm_full_usage "\n\n" \ |
| "Manipulate RPM packages\n" \ |
| "\nOptions:" \ |
| "\n -i Install package" \ |
| "\n -q Query package" \ |
| "\n -p Query uninstalled package" \ |
| "\n -i Show information" \ |
| "\n -l List contents" \ |
| "\n -d List documents" \ |
| "\n -c List config files" \ |
| |
| #define rpm2cpio_trivial_usage \ |
| "package.rpm" |
| #define rpm2cpio_full_usage "\n\n" \ |
| "Output a cpio archive of the rpm file" |
| |
| #define rtcwake_trivial_usage \ |
| "[-a | -l | -u] [-d DEV] [-m MODE] [-s SECS | -t TIME]" |
| #define rtcwake_full_usage "\n\n" \ |
| "Enter a system sleep state until specified wakeup time\n" \ |
| USE_GETOPT_LONG( \ |
| "\n -a,--auto Read clock mode from adjtime" \ |
| "\n -l,--local Clock is set to local time" \ |
| "\n -u,--utc Clock is set to UTC time" \ |
| "\n -d,--device=DEV Specify the RTC device" \ |
| "\n -m,--mode=MODE Set the sleep state (default: standby)" \ |
| "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \ |
| "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -a Read clock mode from adjtime" \ |
| "\n -l Clock is set to local time" \ |
| "\n -u Clock is set to UTC time" \ |
| "\n -d DEV Specify the RTC device" \ |
| "\n -m MODE Set the sleep state (default: standby)" \ |
| "\n -s SEC Set the timeout in SEC seconds from now" \ |
| "\n -t TIME Set the timeout to TIME seconds from epoch" \ |
| ) |
| |
| #define runcon_trivial_usage \ |
| "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ |
| " runcon CONTEXT COMMAND [args]" |
| #define runcon_full_usage "\n\n" \ |
| "Run a program in a different security context\n" \ |
| "\n CONTEXT Complete security context\n" \ |
| USE_FEATURE_RUNCON_LONG_OPTIONS( \ |
| "\n -c,--compute Compute process transition context before modifying" \ |
| "\n -t,--type=TYPE Type (for same role as parent)" \ |
| "\n -u,--user=USER User identity" \ |
| "\n -r,--role=ROLE Role" \ |
| "\n -l,--range=RNG Levelrange" \ |
| ) \ |
| SKIP_FEATURE_RUNCON_LONG_OPTIONS( \ |
| "\n -c Compute process transition context before modifying" \ |
| "\n -t TYPE Type (for same role as parent)" \ |
| "\n -u USER User identity" \ |
| "\n -r ROLE Role" \ |
| "\n -l RNG Levelrange" \ |
| ) |
| |
| #define run_parts_trivial_usage \ |
| "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY" |
| #define run_parts_full_usage "\n\n" \ |
| "Run a bunch of scripts in a directory\n" \ |
| "\nOptions:" \ |
| "\n -t Print what would be run, but don't actually run anything" \ |
| "\n -a ARG Pass ARG as argument for every program" \ |
| "\n -u MASK Set the umask to MASK before running every program" \ |
| USE_FEATURE_RUN_PARTS_FANCY( \ |
| "\n -l Print names of all matching files even if they are not executable" \ |
| ) |
| |
| #define run_parts_example_usage \ |
| "$ run-parts -a start /etc/init.d\n" \ |
| "$ run-parts -a stop=now /etc/init.d\n\n" \ |
| "Let's assume you have a script foo/dosomething:\n" \ |
| "#!/bin/sh\n" \ |
| "for i in $*; do eval $i; done; unset i\n" \ |
| "case \"$1\" in\n" \ |
| "start*) echo starting something;;\n" \ |
| "stop*) set -x; shutdown -h $stop;;\n" \ |
| "esac\n\n" \ |
| "Running this yields:\n" \ |
| "$run-parts -a stop=+4m foo/\n" \ |
| "+ shutdown -h +4m" |
| |
| #define runlevel_trivial_usage \ |
| "[utmp]" |
| #define runlevel_full_usage "\n\n" \ |
| "Find the current and previous system runlevel.\n\n" \ |
| "If no utmp file exists or if no runlevel record can be found,\n" \ |
| "print \"unknown\"" |
| #define runlevel_example_usage \ |
| "$ runlevel /var/run/utmp\n" \ |
| "N 2" |
| |
| #define runsv_trivial_usage \ |
| "dir" |
| #define runsv_full_usage "\n\n" \ |
| "Start and monitor a service and optionally an appendant log service" |
| |
| #define runsvdir_trivial_usage \ |
| "[-P] dir" |
| #define runsvdir_full_usage "\n\n" \ |
| "Start a runsv process for each subdirectory" |
| |
| #define rx_trivial_usage \ |
| "FILE" |
| #define rx_full_usage "\n\n" \ |
| "Receive a file using the xmodem protocol" |
| #define rx_example_usage \ |
| "$ rx /tmp/foo\n" |
| |
| #define script_trivial_usage \ |
| "[-afq] [-c COMMAND] [OUTFILE]" |
| #define script_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -a Append output" \ |
| "\n -c Run COMMAND, not shell" \ |
| "\n -f Flush output after each write" \ |
| "\n -q Quiet" \ |
| |
| #define sed_trivial_usage \ |
| "[-efinr] pattern [files...]" |
| #define sed_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -e script Add the script to the commands to be executed" \ |
| "\n -f scriptfile Add scriptfile contents to the" \ |
| "\n commands to be executed" \ |
| "\n -i Edit files in-place" \ |
| "\n -n Suppress automatic printing of pattern space" \ |
| "\n -r Use extended regular expression syntax" \ |
| "\n" \ |
| "\nIf no -e or -f is given, the first non-option argument is taken as the sed" \ |
| "\nscript to interpret. All remaining arguments are names of input files; if no" \ |
| "\ninput files are specified, then the standard input is read. Source files" \ |
| "\nwill not be modified unless -i option is given." \ |
| |
| #define sed_example_usage \ |
| "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ |
| "bar\n" |
| |
| #define selinuxenabled_trivial_usage NOUSAGE_STR |
| #define selinuxenabled_full_usage "" |
| |
| #define sendmail_trivial_usage \ |
| "[-w timeout] [-H [user:pass@]server[:port]] [-S]\n" \ |
| "[-N type] [-f sender] [-F fullname] " \ |
| USE_FEATURE_SENDMAIL_MAILX("[-s subject] [-c cc-rcpt]... [-j charset] [-a attach]... [-e err-rcpt] ") "[-t] [rcpt]..." |
| #define sendmail_full_usage "\n\n" \ |
| "Send an email\n" \ |
| "\nOptions:" \ |
| "\n -w timeout Network timeout" \ |
| "\n -H [user:pass@]server[:port] Server" \ |
| "\n -S Use openssl connection helper for secure servers" \ |
| "\n -N type Request delivery notification. Type is ignored" \ |
| "\n -f sender Sender" \ |
| "\n -F fullname Sender full name. Overrides $NAME" \ |
| USE_FEATURE_SENDMAIL_MAILX( \ |
| "\n -s subject Subject" \ |
| "\n -c rcpt Cc: recipient. May be multiple" \ |
| "\n -j charset Assume charset for body and subject (" CONFIG_FEATURE_SENDMAIL_CHARSET ")" \ |
| "\n -a file File to attach. May be multiple" \ |
| "\n -e rcpt Errors-To: recipient" \ |
| ) |
| "\n -t Read recipients and subject from body" \ |
| "\n" \ |
| "\nOther options are silently ignored; -oi is implied" \ |
| |
| #define seq_trivial_usage \ |
| "[first [increment]] last" |
| #define seq_full_usage "\n\n" \ |
| "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ |
| "FIRST, INCREMENT default to 1\n" \ |
| "\nArguments:" \ |
| "\n LAST" \ |
| "\n FIRST LAST" \ |
| "\n FIRST INCREMENT LAST" \ |
| |
| #define sestatus_trivial_usage \ |
| "[-vb]" |
| #define sestatus_full_usage "\n\n" \ |
| " -v Verbose" \ |
| "\n -b Display current state of booleans" \ |
| |
| #define setconsole_trivial_usage \ |
| "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]" |
| #define setconsole_full_usage "\n\n" \ |
| "Redirect system console output to DEVICE (default: /dev/tty)\n" \ |
| "\nOptions:" \ |
| "\n -r Reset output to /dev/console" \ |
| |
| #define setenforce_trivial_usage \ |
| "[Enforcing | Permissive | 1 | 0]" |
| #define setenforce_full_usage "" |
| |
| #define setfiles_trivial_usage \ |
| "[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \ |
| USE_FEATURE_SETFILES_CHECK_OPTION( \ |
| " [-c policyfile] spec_file" \ |
| ) \ |
| " pathname" |
| #define setfiles_full_usage "\n\n" \ |
| "Reset file contexts under pathname according to spec_file\n" \ |
| USE_FEATURE_SETFILES_CHECK_OPTION( \ |
| "\n -c file Check the validity of the contexts against the specified binary policy" \ |
| ) \ |
| "\n -d Show which specification matched each file" \ |
| "\n -l Log changes in file labels to syslog" \ |
| "\n -n Don't change any file labels" \ |
| "\n -q Suppress warnings" \ |
| "\n -r dir Use an altenate root path" \ |
| "\n -e dir Exclude directory" \ |
| "\n -F Force reset of context to match file_context for customizable files" \ |
| "\n -o file Save list of files with incorrect context" \ |
| "\n -s Take a list of files from standard input (instead of command line)" \ |
| "\n -v Show changes in file labels, if type or role are changing" \ |
| "\n -vv Show changes in file labels, if type, role, or user are changing" \ |
| "\n -W Display warnings about entries that had no matching files" \ |
| |
| #define setfont_trivial_usage \ |
| "FONT [-m MAPFILE] [-C TTY]" |
| #define setfont_full_usage "\n\n" \ |
| "Load a console font\n" \ |
| "\nOptions:" \ |
| "\n -m MAPFILE Load console screen map" \ |
| "\n -C TTY Affect TTY instead of /dev/tty" \ |
| |
| #define setfont_example_usage \ |
| "$ setfont -m koi8-r /etc/i18n/fontname\n" |
| |
| #define setkeycodes_trivial_usage \ |
| "SCANCODE KEYCODE..." |
| #define setkeycodes_full_usage "\n\n" \ |
| "Set entries into the kernel's scancode-to-keycode map,\n" \ |
| "allowing unusual keyboards to generate usable keycodes.\n\n" \ |
| "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ |
| "and KEYCODE is given in decimal" \ |
| |
| #define setkeycodes_example_usage \ |
| "$ setkeycodes e030 127\n" |
| |
| #define setlogcons_trivial_usage \ |
| "N" |
| #define setlogcons_full_usage "\n\n" \ |
| "Redirect the kernel output to console N (0 for current)" |
| |
| #define setsebool_trivial_usage \ |
| "boolean value" |
| |
| #define setsebool_full_usage "\n\n" \ |
| "Change boolean setting" |
| |
| #define setsid_trivial_usage \ |
| "PROG [ARG...]" |
| #define setsid_full_usage "\n\n" \ |
| "Run PROG in a new session. PROG will have no controlling terminal\n" \ |
| "and will not be affected by keyboard signals (Ctrl-C etc).\n" \ |
| "See setsid(2) for details." \ |
| |
| #define lash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: sh -c command [args]..." |
| #define lash_full_usage "\n\n" \ |
| "lash is deprecated, please use hush" |
| |
| #define last_trivial_usage \ |
| ""USE_FEATURE_LAST_FANCY("[-HW] [-f file]") |
| #define last_full_usage "\n\n" \ |
| "Show listing of the last users that logged into the system" \ |
| USE_FEATURE_LAST_FANCY( "\n" \ |
| "\nOptions:" \ |
| /* "\n -H Show header line" */ \ |
| "\n -W Display with no host column truncation" \ |
| "\n -f file Read from file instead of /var/log/wtmp" \ |
| ) |
| |
| #define sha1sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") |
| #define sha1sum_full_usage "\n\n" \ |
| "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ |
| "\nOptions:" \ |
| "\n -c Check SHA1 sums against given list" \ |
| "\n -s Don't output anything, status code shows success" \ |
| "\n -w Warn about improperly formatted SHA1 checksum lines" \ |
| ) |
| |
| #define showkey_trivial_usage \ |
| "[-a | -k | -s]" |
| #define showkey_full_usage "\n\n" \ |
| "Show keys pressed\n" \ |
| "\nOptions:" \ |
| "\n -a Display decimal/octal/hex values of the keys" \ |
| "\n -k Display interpreted keycodes (default)" \ |
| "\n -s Display raw scan-codes" \ |
| |
| #define slattach_trivial_usage \ |
| "[-cehmLF] [-s speed] [-p protocol] DEVICEs" |
| #define slattach_full_usage "\n\n" \ |
| "Attach network interface(s) to serial line(s)\n" \ |
| "\nOptions:" \ |
| "\n -p Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \ |
| "\n -s Set line speed" \ |
| "\n -e Exit after initializing device" \ |
| "\n -h Exit when the carrier is lost" \ |
| "\n -c Execute a command when the line is hung up" \ |
| "\n -m Do NOT initialize the line in raw 8 bits mode" \ |
| "\n -L Enable 3-wire operation" \ |
| "\n -F Disable RTS/CTS flow control" \ |
| |
| #define sleep_trivial_usage \ |
| USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...") |
| #define sleep_full_usage "\n\n" \ |
| SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \ |
| USE_FEATURE_FANCY_SLEEP( \ |
| "Pause for a time equal to the total of the args given, where each arg can\n" \ |
| "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") |
| #define sleep_example_usage \ |
| "$ sleep 2\n" \ |
| "[2 second delay results]\n" \ |
| USE_FEATURE_FANCY_SLEEP( \ |
| "$ sleep 1d 3h 22m 8s\n" \ |
| "[98528 second delay results]\n") |
| |
| #define sort_trivial_usage \ |
| "[-nru" \ |
| USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \ |
| "] [FILE]..." |
| #define sort_full_usage "\n\n" \ |
| "Sort lines of text\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_SORT_BIG( \ |
| "\n -b Ignore leading blanks" \ |
| "\n -c Check whether input is sorted" \ |
| "\n -d Dictionary order (blank or alphanumeric only)" \ |
| "\n -f Ignore case" \ |
| "\n -g General numerical sort" \ |
| "\n -i Ignore unprintable characters" \ |
| "\n -k Sort key" \ |
| "\n -M Sort month" \ |
| ) \ |
| "\n -n Sort numbers" \ |
| USE_FEATURE_SORT_BIG( \ |
| "\n -o Output to file" \ |
| "\n -k Sort by key" \ |
| "\n -t CHAR Key separator" \ |
| ) \ |
| "\n -r Reverse sort order" \ |
| USE_FEATURE_SORT_BIG( \ |
| "\n -s Stable (don't sort ties alphabetically)" \ |
| ) \ |
| "\n -u Suppress duplicate lines" \ |
| USE_FEATURE_SORT_BIG( \ |
| "\n -z Lines are terminated by NUL, not newline" \ |
| "\n -mST Ignored for GNU compatibility") \ |
| |
| #define sort_example_usage \ |
| "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" \ |
| "d\n" \ |
| "e\n" \ |
| "f\n" \ |
| USE_FEATURE_SORT_BIG( \ |
| "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ |
| "d 2\n" \ |
| "b 2\n" \ |
| "c 3\n" \ |
| ) \ |
| "" |
| |
| #define split_trivial_usage \ |
| "[OPTION] [INPUT [PREFIX]]" |
| #define split_full_usage "\n\n" \ |
| "Options:" \ |
| "\n -b n[k|m] Split by bytes" \ |
| "\n -l n Split by lines" \ |
| "\n -a n Use n letters as suffix" \ |
| |
| #define split_example_usage \ |
| "$ split TODO foo\n" \ |
| "$ cat TODO | split -a 2 -l 2 TODO_\n" |
| |
| #define start_stop_daemon_trivial_usage \ |
| "[OPTIONS] [-S|-K] ... [-- arguments...]" |
| #define start_stop_daemon_full_usage "\n\n" \ |
| "Search for matching processes, and then\n" \ |
| "-K: stop all matching processes.\n" \ |
| "-S: start a process unless a matching process is found.\n" \ |
| USE_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \ |
| "\nProcess matching:" \ |
| "\n -u,--user USERNAME|UID Match only this user's processes" \ |
| "\n -n,--name NAME Match processes with NAME" \ |
| "\n in comm field in /proc/PID/stat" \ |
| "\n -x,--exec EXECUTABLE Match processes with this command" \ |
| "\n in /proc/PID/cmdline" \ |
| "\n -p,--pidfile FILE Match a process with PID from the file" \ |
| "\n All specified conditions must match" \ |
| "\n-S only:" \ |
| "\n -x,--exec EXECUTABLE Program to run" \ |
| "\n -a,--startas NAME Zeroth argument" \ |
| "\n -b,--background Background" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -N,--nicelevel N Change nice level" \ |
| ) \ |
| "\n -c,--chuid USER[:[GRP]] Change to user/group" \ |
| "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \ |
| "\n-K only:" \ |
| "\n -s,--signal SIG Signal to send" \ |
| "\n -t,--test Match only, exit with 0 if a process is found" \ |
| "\nOther:" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -o,--oknodo Exit with status 0 if nothing is done" \ |
| "\n -v,--verbose Verbose" \ |
| ) \ |
| "\n -q,--quiet Quiet" \ |
| ) \ |
| SKIP_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \ |
| "\nProcess matching:" \ |
| "\n -u USERNAME|UID Match only this user's processes" \ |
| "\n -n NAME Match processes with NAME" \ |
| "\n in comm field in /proc/PID/stat" \ |
| "\n -x EXECUTABLE Match processes with this command" \ |
| "\n command in /proc/PID/cmdline" \ |
| "\n -p FILE Match a process with PID from the file" \ |
| "\n All specified conditions must match" \ |
| "\n-S only:" \ |
| "\n -x EXECUTABLE Program to run" \ |
| "\n -a NAME Zeroth argument" \ |
| "\n -b Background" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -N N Change nice level" \ |
| ) \ |
| "\n -c USER[:[GRP]] Change to user/group" \ |
| "\n -m Write PID to the pidfile specified by -p" \ |
| "\n-K only:" \ |
| "\n -s SIG Signal to send" \ |
| "\n -t Match only, exit with 0 if a process is found" \ |
| "\nOther:" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -o Exit with status 0 if nothing is done" \ |
| "\n -v Verbose" \ |
| ) \ |
| "\n -q Quiet" \ |
| ) \ |
| |
| #define stat_trivial_usage \ |
| "[OPTION] FILE..." |
| #define stat_full_usage "\n\n" \ |
| "Display file (default) or filesystem status\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_STAT_FORMAT( \ |
| "\n -c fmt Use the specified format" \ |
| ) \ |
| "\n -f Display filesystem status" \ |
| "\n -L Dereference links" \ |
| "\n -t Display info in terse form" \ |
| USE_SELINUX( \ |
| "\n -Z Print security context" \ |
| ) \ |
| USE_FEATURE_STAT_FORMAT( \ |
| "\n\nValid format sequences for files:\n" \ |
| " %a Access rights in octal\n" \ |
| " %A Access rights in human readable form\n" \ |
| " %b Number of blocks allocated (see %B)\n" \ |
| " %B The size in bytes of each block reported by %b\n" \ |
| " %d Device number in decimal\n" \ |
| " %D Device number in hex\n" \ |
| " %f Raw mode in hex\n" \ |
| " %F File type\n" \ |
| " %g Group ID of owner\n" \ |
| " %G Group name of owner\n" \ |
| " %h Number of hard links\n" \ |
| " %i Inode number\n" \ |
| " %n File name\n" \ |
| " %N Quoted file name with dereference if symlink\n" \ |
| " %o I/O block size\n" \ |
| " %s Total size, in bytes\n" \ |
| " %t Major device type in hex\n" \ |
| " %T Minor device type in hex\n" \ |
| " %u User ID of owner\n" \ |
| " %U User name of owner\n" \ |
| " %x Time of last access\n" \ |
| " %X Time of last access as seconds since Epoch\n" \ |
| " %y Time of last modification\n" \ |
| " %Y Time of last modification as seconds since Epoch\n" \ |
| " %z Time of last change\n" \ |
| " %Z Time of last change as seconds since Epoch\n" \ |
| "\nValid format sequences for file systems:\n" \ |
| " %a Free blocks available to non-superuser\n" \ |
| " %b Total data blocks in file system\n" \ |
| " %c Total file nodes in file system\n" \ |
| " %d Free file nodes in file system\n" \ |
| " %f Free blocks in file system\n" \ |
| USE_SELINUX( \ |
| " %C Security context in SELinux\n" \ |
| ) \ |
| " %i File System ID in hex\n" \ |
| " %l Maximum length of filenames\n" \ |
| " %n File name\n" \ |
| " %s Block size (for faster transfer)\n" \ |
| " %S Fundamental block size (for block counts)\n" \ |
| " %t Type in hex\n" \ |
| " %T Type in human readable form" \ |
| ) \ |
| |
| #define strings_trivial_usage \ |
| "[-afo] [-n length] [file...]" |
| #define strings_full_usage "\n\n" \ |
| "Display printable strings in a binary file\n" \ |
| "\nOptions:" \ |
| "\n -a Scan whole file (default)" \ |
| "\n -f Precede strings with filenames" \ |
| "\n -n N At least N characters form a string (default 4)" \ |
| "\n -o Precede strings with decimal offsets" \ |
| |
| #define stty_trivial_usage \ |
| "[-a|g] [-F DEVICE] [SETTING]..." |
| #define stty_full_usage "\n\n" \ |
| "Without arguments, prints baud rate, line discipline,\n" \ |
| "and deviations from stty sane\n" \ |
| "\nOptions:" \ |
| "\n -F DEVICE Open device instead of stdin" \ |
| "\n -a Print all current settings in human-readable form" \ |
| "\n -g Print in stty-readable form" \ |
| "\n [SETTING] See manpage" \ |
| |
| #define su_trivial_usage \ |
| "[OPTION]... [-] [username]" |
| #define su_full_usage "\n\n" \ |
| "Change user id or become root\n" \ |
| "\nOptions:" \ |
| "\n -p, -m Preserve environment" \ |
| "\n -c Command to pass to 'sh -c'" \ |
| "\n -s Shell to use instead of default shell" \ |
| |
| #define sulogin_trivial_usage \ |
| "[OPTION]... [tty-device]" |
| #define sulogin_full_usage "\n\n" \ |
| "Single user login\n" \ |
| "\nOptions:" \ |
| "\n -t Timeout" \ |
| |
| #define sum_trivial_usage \ |
| "[rs] [files...]" |
| #define sum_full_usage "\n\n" \ |
| "Checksum and count the blocks in a file\n" \ |
| "\nOptions:" \ |
| "\n -r Use BSD sum algorithm (1K blocks)" \ |
| "\n -s Use System V sum algorithm (512byte blocks)" \ |
| |
| #define sv_trivial_usage \ |
| "[-v] [-w sec] command service..." |
| #define sv_full_usage "\n\n" \ |
| "Control services monitored by runsv supervisor.\n" \ |
| "Commands (only first character is enough):\n" \ |
| "\n" \ |
| "status: query service status\n" \ |
| "up: if service isn't running, start it. If service stops, restart it\n" \ |
| "once: like 'up', but if service stops, don't restart it\n" \ |
| "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \ |
| " if it exists. After it stops, do not restart service\n" \ |
| "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ |
| " runsv exits too\n" \ |
| "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ |
| "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \ |
| |
| #define svlogd_trivial_usage \ |
| "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." |
| #define svlogd_full_usage "\n\n" \ |
| "Continuously read log data from standard input, optionally " \ |
| "filter log messages, and write the data to one or more automatically " \ |
| "rotated logs" \ |
| |
| #define swapoff_trivial_usage \ |
| "[-a] [DEVICE]" |
| #define swapoff_full_usage "\n\n" \ |
| "Stop swapping on DEVICE\n" \ |
| "\nOptions:" \ |
| "\n -a Stop swapping on all swap devices" \ |
| |
| #define swapon_trivial_usage \ |
| "[-a]" USE_FEATURE_SWAPON_PRI(" [-p pri]") " [DEVICE]" |
| #define swapon_full_usage "\n\n" \ |
| "Start swapping on DEVICE\n" \ |
| "\nOptions:" \ |
| "\n -a Start swapping on all swap devices" \ |
| USE_FEATURE_SWAPON_PRI( \ |
| "\n -p pri Set swap device priority" \ |
| ) \ |
| |
| #define switch_root_trivial_usage \ |
| "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" |
| #define switch_root_full_usage "\n\n" \ |
| "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ |
| "and exec NEW_INIT\n" \ |
| "\nOptions:" \ |
| "\n -c Redirect console to device on new root" \ |
| |
| #define sync_trivial_usage \ |
| "" |
| #define sync_full_usage "\n\n" \ |
| "Write all buffered filesystem blocks to disk" |
| |
| #define sysctl_trivial_usage \ |
| "[OPTIONS]... [VALUE]..." |
| #define sysctl_full_usage "\n\n" \ |
| "Configure kernel parameters at runtime\n" \ |
| "\nOptions:" \ |
| "\n -n Disable printing of key names" \ |
| "\n -e Don't warn about unknown keys" \ |
| "\n -w Change sysctl setting" \ |
| "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \ |
| "\n -a Display all values" \ |
| "\n -A Display all values in table form" \ |
| |
| #define sysctl_example_usage \ |
| "sysctl [-n] [-e] variable...\n" \ |
| "sysctl [-n] [-e] -w variable=value...\n" \ |
| "sysctl [-n] [-e] -a\n" \ |
| "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \ |
| "sysctl [-n] [-e] -A\n" |
| |
| #define syslogd_trivial_usage \ |
| "[OPTION]..." |
| #define syslogd_full_usage "\n\n" \ |
| "System logging utility.\n" \ |
| "Note that this version of syslogd ignores /etc/syslog.conf.\n" \ |
| "\nOptions:" \ |
| "\n -n Run in foreground" \ |
| "\n -O FILE Log to given file (default=/var/log/messages)" \ |
| "\n -l n Set local log level" \ |
| "\n -S Smaller logging output" \ |
| USE_FEATURE_ROTATE_LOGFILE( \ |
| "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ |
| "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ |
| USE_FEATURE_REMOTE_LOG( \ |
| "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ |
| "\n -L Log locally and via network (default is network only if -R)") \ |
| USE_FEATURE_SYSLOGD_DUP( \ |
| "\n -D Drop duplicates") \ |
| USE_FEATURE_IPC_SYSLOG( \ |
| "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \ |
| /* NB: -Csize shouldn't have space (because size is optional) */ |
| /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */ |
| |
| #define syslogd_example_usage \ |
| "$ syslogd -R masterlog:514\n" \ |
| "$ syslogd -R 192.168.1.1:601\n" |
| |
| #define tac_trivial_usage \ |
| "[FILE]..." |
| #define tac_full_usage "\n\n" \ |
| "Concatenate FILE(s) and print them in reverse" |
| |
| #define tail_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tail_full_usage "\n\n" \ |
| "Print last 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_FANCY_TAIL( \ |
| "\n -c N[kbm] Output the last N bytes") \ |
| "\n -n N[kbm] Print last N lines instead of last 10" \ |
| "\n -f Output data as the file grows" \ |
| USE_FEATURE_FANCY_TAIL( \ |
| "\n -q Never output headers giving file names" \ |
| "\n -s SEC Wait SEC seconds between reads with -f" \ |
| "\n -v Always output headers giving file names" \ |
| "\n" \ |
| "\nIf the first character of N (bytes or lines) is a '+', output begins with" \ |
| "\nthe Nth item from the start of each file, otherwise, print the last N items" \ |
| "\nin the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \ |
| |
| #define tail_example_usage \ |
| "$ tail -n 1 /etc/resolv.conf\n" \ |
| "nameserver 10.0.0.1\n" |
| |
| #define tar_trivial_usage \ |
| "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_SEAMLESS_GZ("z") \ |
| USE_FEATURE_SEAMLESS_BZ2("j") USE_FEATURE_SEAMLESS_LZMA("a") \ |
| USE_FEATURE_SEAMLESS_Z("Z") "xtvO] " \ |
| USE_FEATURE_TAR_FROM("[-X FILE] ") \ |
| "[-f TARFILE] [-C DIR] [FILE(s)]..." |
| #define tar_full_usage "\n\n" \ |
| "Create, extract, or list files from a tar file\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_TAR_CREATE( \ |
| "\n c Create") \ |
| "\n x Extract" \ |
| "\n t List" \ |
| "\nArchive format selection:" \ |
| USE_FEATURE_SEAMLESS_GZ( \ |
| "\n z Filter the archive through gzip" \ |
| ) \ |
| USE_FEATURE_SEAMLESS_BZ2( \ |
| "\n j Filter the archive through bzip2" \ |
| ) \ |
| USE_FEATURE_SEAMLESS_LZMA( \ |
| "\n a Filter the archive through lzma" \ |
| ) \ |
| USE_FEATURE_SEAMLESS_Z( \ |
| "\n Z Filter the archive through compress" \ |
| ) \ |
| "\nFile selection:" \ |
| "\n f Name of TARFILE or \"-\" for stdin" \ |
| "\n O Extract to stdout" \ |
| USE_FEATURE_TAR_FROM( \ |
| "\n exclude File to exclude" \ |
| "\n X File with names to exclude" \ |
| ) \ |
| "\n C Change to directory DIR before operation" \ |
| "\n v Verbose" \ |
| |
| #define tar_example_usage \ |
| "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ |
| "$ tar -cf /tmp/tarball.tar /usr/local\n" |
| |
| #define taskset_trivial_usage \ |
| "[-p] [mask] [pid | command [arg]...]" |
| #define taskset_full_usage "\n\n" \ |
| "Set or get CPU affinity\n" \ |
| "\nOptions:" \ |
| "\n -p Operate on an existing PID" \ |
| |
| #define taskset_example_usage \ |
| "$ taskset 0x7 ./dgemm_test&\n" \ |
| "$ taskset -p 0x1 $!\n" \ |
| "pid 4790's current affinity mask: 7\n" \ |
| "pid 4790's new affinity mask: 1\n" \ |
| "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ |
| "pid 6671's current affinity mask: 1\n" \ |
| "pid 6671's new affinity mask: 1\n" \ |
| "$ taskset -p 1\n" \ |
| "pid 1's current affinity mask: 3\n" |
| |
| #define tee_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tee_full_usage "\n\n" \ |
| "Copy standard input to each FILE, and also to standard output\n" \ |
| "\nOptions:" \ |
| "\n -a Append to the given FILEs, do not overwrite" \ |
| "\n -i Ignore interrupt signals (SIGINT)" \ |
| |
| #define tee_example_usage \ |
| "$ echo \"Hello\" | tee /tmp/foo\n" \ |
| "$ cat /tmp/foo\n" \ |
| "Hello\n" |
| |
| #if ENABLE_FEATURE_TELNET_AUTOLOGIN |
| #define telnet_trivial_usage \ |
| "[-a] [-l USER] HOST [PORT]" |
| #define telnet_full_usage "\n\n" \ |
| "Connect to telnet server\n" \ |
| "\nOptions:" \ |
| "\n -a Automatic login with $USER variable" \ |
| "\n -l USER Automatic login as USER" \ |
| |
| #else |
| #define telnet_trivial_usage \ |
| "HOST [PORT]" |
| #define telnet_full_usage "\n\n" \ |
| "Connect to telnet server" |
| #endif |
| |
| #define telnetd_trivial_usage \ |
| "[OPTION]" |
| #define telnetd_full_usage "\n\n" \ |
| "Handle incoming telnet connections" \ |
| SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \ |
| "\nOptions:" \ |
| "\n -l LOGIN Exec LOGIN on connect" \ |
| "\n -f issue_file Display issue_file instead of /etc/issue" \ |
| "\n -K Close connection as soon as login exits" \ |
| "\n (normally wait until all programs close slave pty)" \ |
| USE_FEATURE_TELNETD_STANDALONE( \ |
| "\n -p PORT Port to listen on" \ |
| "\n -b ADDR Address to bind to" \ |
| "\n -F Run in foreground" \ |
| "\n -i Run as inetd subservice" \ |
| ) |
| |
| /* "test --help" does not print help (POSIX compat), only "[ --help" does. |
| * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION") */ |
| #define test_trivial_usage \ |
| "EXPRESSION ]" |
| #define test_full_usage "\n\n" \ |
| "Check file types, compare values etc. Return a 0/1 exit code\n" \ |
| "depending on logical value of EXPRESSION" |
| #define test_example_usage \ |
| "$ test 1 -eq 2\n" \ |
| "$ echo $?\n" \ |
| "1\n" \ |
| "$ test 1 -eq 1\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /etc ]\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /junk ]\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define tc_trivial_usage \ |
| /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]" |
| #define tc_full_usage "\n\n" \ |
| "OBJECT: {qdisc|class|filter}\n" \ |
| "CMD: {add|del|change|replace|show}\n" \ |
| "\n" \ |
| "qdisc [ handle QHANDLE ] [ root |"USE_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \ |
| /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \ |
| "\t[ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \ |
| "\tQDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \ |
| "qdisc show [ dev STRING ]"USE_FEATURE_TC_INGRESS(" [ingress]")"\n" \ |
| "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \ |
| "\t[ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \ |
| "class show [ dev STRING ] [ root | parent CLASSID ]\n" \ |
| "filter [ pref PRIO ] [ protocol PROTO ]\n" \ |
| /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \ |
| "\t[ root | classid CLASSID ] [ handle FILTERID ]\n" \ |
| "\t[ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \ |
| "filter show [ dev STRING ] [ root | parent CLASSID ]" |
| |
| #define tcpsvd_trivial_usage \ |
| "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..." |
| /* with not-implemented options: */ |
| /* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */ |
| #define tcpsvd_full_usage "\n\n" \ |
| "Create TCP socket, bind it to ip:port and listen\n" \ |
| "for incoming connection. Run PROG for each connection.\n" \ |
| "\nip IP to listen on. '0' = all" \ |
| "\nport Port to listen on" \ |
| "\nprog [arg] Program to run" \ |
| "\n-l name Local hostname (else looks up local hostname in DNS)" \ |
| "\n-u user[:group] Change to user/group after bind" \ |
| "\n-c n Handle up to n connections simultaneously" \ |
| "\n-b n Allow a backlog of approximately n TCP SYNs" \ |
| "\n-C n[:msg] Allow only up to n connections from the same IP" \ |
| "\n New connections from this IP address are closed" \ |
| "\n immediately. 'msg' is written to the peer before close" \ |
| "\n-h Look up peer's hostname" \ |
| "\n-E Do not set up environment variables" \ |
| "\n-v Verbose" \ |
| |
| #define udpsvd_trivial_usage \ |
| "[-hEv] [-c n] [-u user] [-l name] ip port prog" |
| #define udpsvd_full_usage "\n\n" \ |
| "Create UDP socket, bind it to ip:port and wait\n" \ |
| "for incoming packets. Run PROG for each packet,\n" \ |
| "redirecting all further packets with same peer ip:port to it\n" \ |
| "\nip IP to listen on. '0' = all" \ |
| "\nport Port to listen on" \ |
| "\nprog [arg] Program to run" \ |
| "\n-l name Local hostname (else looks up local hostname in DNS)" \ |
| "\n-u user[:group] Change to user/group after bind" \ |
| "\n-c n Handle up to n connections simultaneously" \ |
| "\n-h Look up peer's hostname" \ |
| "\n-E Do not set up environment variables" \ |
| "\n-v Verbose" \ |
| |
| #define tftp_trivial_usage \ |
| "[OPTION]... HOST [PORT]" |
| #define tftp_full_usage "\n\n" \ |
| "Transfer a file from/to tftp server\n" \ |
| "\nOptions:" \ |
| "\n -l FILE Local FILE" \ |
| "\n -r FILE Remote FILE" \ |
| USE_FEATURE_TFTP_GET( \ |
| "\n -g Get file" \ |
| ) \ |
| USE_FEATURE_TFTP_PUT( \ |
| "\n -p Put file" \ |
| ) \ |
| USE_FEATURE_TFTP_BLOCKSIZE( \ |
| "\n -b SIZE Transfer blocks of SIZE octets" \ |
| ) |
| |
| #define tftpd_trivial_usage \ |
| "[-cr] [-u USER] [DIR]" |
| #define tftpd_full_usage "\n\n" \ |
| "Transfer a file on tftp client's request.\n" \ |
| "\nOptions:" \ |
| "\n -r Prohibit upload" \ |
| "\n -c Allow file creation via upload" \ |
| "\n -u Access files as USER" \ |
| |
| #define time_trivial_usage \ |
| "[OPTION]... COMMAND [ARGS...]" |
| #define time_full_usage "\n\n" \ |
| "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ |
| "COMMAND's resource usage information is displayed.\n" \ |
| "\nOptions:" \ |
| "\n -v Verbose" \ |
| |
| #define top_trivial_usage \ |
| "[-b] [-nCOUNT] [-dSECONDS]" |
| #define top_full_usage "\n\n" \ |
| "Provide a view of process activity in real time.\n" \ |
| "Read the status of all processes from /proc each SECONDS\n" \ |
| "and show the status for however many processes will fit on the screen." \ |
| |
| #define touch_trivial_usage \ |
| "[-c] FILE [FILE...]" |
| #define touch_full_usage "\n\n" \ |
| "Update the last-modified date on the given FILE[s]\n" \ |
| "\nOptions:" \ |
| "\n -c Do not create any files" \ |
| |
| #define touch_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "/bin/ls: /tmp/foo: No such file or directory\n" \ |
| "$ touch /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" |
| |
| #define tr_trivial_usage \ |
| "[-cds] STRING1 [STRING2]" |
| #define tr_full_usage "\n\n" \ |
| "Translate, squeeze, and/or delete characters from\n" \ |
| "standard input, writing to standard output\n" \ |
| "\nOptions:" \ |
| "\n -c Take complement of STRING1" \ |
| "\n -d Delete input characters coded STRING1" \ |
| "\n -s Squeeze multiple output characters of STRING2 into one character" \ |
| |
| #define tr_example_usage \ |
| "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ |
| "hello world\n" |
| |
| #define traceroute_trivial_usage \ |
| "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ |
| " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ |
| " [-z pausemsecs] HOST [data size]" |
| #define traceroute_full_usage "\n\n" \ |
| "Trace the route to HOST\n" \ |
| "\nOptions:" \ |
| "\n -F Set the don't fragment bit" \ |
| "\n -I Use ICMP ECHO instead of UDP datagrams" \ |
| "\n -l Display the ttl value of the returned packet" \ |
| "\n -d Set SO_DEBUG options to socket" \ |
| "\n -n Print hop addresses numerically rather than symbolically" \ |
| "\n -r Bypass the normal routing tables and send directly to a host" \ |
| "\n -v Verbose" \ |
| "\n -m max_ttl Max time-to-live (max number of hops)" \ |
| "\n -p port# Base UDP port number used in probes" \ |
| "\n (default is 33434)" \ |
| "\n -q nqueries Number of probes per 'ttl' (default 3)" \ |
| "\n -s src_addr IP address to use as the source address" \ |
| "\n -t tos Type-of-service in probe packets (default 0)" \ |
| "\n -w wait Time in seconds to wait for a response" \ |
| "\n (default 3 sec)" \ |
| "\n -g Loose source route gateway (8 max)" \ |
| |
| #define true_trivial_usage \ |
| "" |
| #define true_full_usage "\n\n" \ |
| "Return an exit code of TRUE (0)" |
| #define true_example_usage \ |
| "$ true\n" \ |
| "$ echo $?\n" \ |
| "0\n" |
| |
| #define tty_trivial_usage \ |
| "" |
| #define tty_full_usage "\n\n" \ |
| "Print file name of standard input's terminal" \ |
| USE_INCLUDE_SUSv2( "\n" \ |
| "\nOptions:" \ |
| "\n -s Print nothing, only return exit status" \ |
| ) |
| #define tty_example_usage \ |
| "$ tty\n" \ |
| "/dev/tty2\n" |
| |
| #define ttysize_trivial_usage \ |
| "[w] [h]" |
| #define ttysize_full_usage "\n\n" \ |
| "Print dimension(s) of standard input's terminal, on error return 80x25" |
| |
| #define tune2fs_trivial_usage \ |
| "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ |
| "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ |
| "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ |
| "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ |
| "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ |
| "[-T last-check-time] [-U UUID] device" |
| #define tune2fs_full_usage "\n\n" \ |
| "Adjust filesystem options on ext[23] filesystems" |
| |
| #define udhcpc_trivial_usage \ |
| "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \ |
| " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." USE_FEATURE_UDHCP_PORT(" [-P N]") |
| #define udhcpc_full_usage "\n\n" \ |
| USE_GETOPT_LONG( \ |
| " -V,--vendorclass=CLASSID Vendor class identifier" \ |
| "\n -i,--interface=INTERFACE Interface to use (default eth0)" \ |
| "\n -H,-h,--hostname=HOSTNAME Client hostname" \ |
| "\n -c,--clientid=CLIENTID Client identifier" \ |
| "\n -C,--clientid-none Suppress default client identifier" \ |
| "\n -p,--pidfile=file Create pidfile" \ |
| "\n -r,--request=IP IP address to request" \ |
| "\n -s,--script=file Run file at DHCP events (default "CONFIG_DHCPC_DEFAULT_SCRIPT")" \ |
| "\n -t,--retries=N Send up to N request packets" \ |
| "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \ |
| "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \ |
| "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \ |
| "\n -o,--no-default-options Do not request any options (unless -O is also given)" \ |
| "\n -f,--foreground Run in foreground" \ |
| USE_FOR_MMU( \ |
| "\n -b,--background Background if lease is not immediately obtained" \ |
| ) \ |
| "\n -S,--syslog Log to syslog too" \ |
| "\n -n,--now Exit with failure if lease is not immediately obtained" \ |
| "\n -q,--quit Quit after obtaining lease" \ |
| "\n -R,--release Release IP on quit" \ |
| USE_FEATURE_UDHCP_PORT( \ |
| "\n -P,--client-port N Use port N instead of default 68" \ |
| ) \ |
| USE_FEATURE_UDHCPC_ARPING( \ |
| "\n -a,--arping Use arping to validate offered address" \ |
| ) \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -V CLASSID Vendor class identifier" \ |
| "\n -i INTERFACE Interface to use (default: eth0)" \ |
| "\n -H,-h HOSTNAME Client hostname" \ |
| "\n -c CLIENTID Client identifier" \ |
| "\n -C Suppress default client identifier" \ |
| "\n -p file Create pidfile" \ |
| "\n -r IP IP address to request" \ |
| "\n -s file Run file at DHCP events (default "CONFIG_DHCPC_DEFAULT_SCRIPT")" \ |
| "\n -t N Send up to N request packets" \ |
| "\n -T N Try to get a lease for N seconds (default 3)" \ |
| "\n -A N Wait N seconds (default 20) after failure" \ |
| "\n -O OPT Request DHCP option OPT (cumulative)" \ |
| "\n -o Do not request any options (unless -O is also given)" \ |
| "\n -f Run in foreground" \ |
| USE_FOR_MMU( \ |
| "\n -b Background if lease is not immediately obtained" \ |
| ) \ |
| "\n -S Log to syslog too" \ |
| "\n -n Exit with failure if lease is not immediately obtained" \ |
| "\n -q Quit after obtaining lease" \ |
| "\n -R Release IP on quit" \ |
| USE_FEATURE_UDHCP_PORT( \ |
| "\n -P N Use port N instead of default 68" \ |
| ) \ |
| USE_FEATURE_UDHCPC_ARPING( \ |
| "\n -a Use arping to validate offered address" \ |
| ) \ |
| ) |
| |
| #define udhcpd_trivial_usage \ |
| "[-fS]" USE_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \ |
| |
| #define udhcpd_full_usage "\n\n" \ |
| "DHCP server\n" \ |
| "\n -f Run in foreground" \ |
| "\n -S Log to syslog too" \ |
| USE_FEATURE_UDHCP_PORT( \ |
| "\n -P N Use port N instead of default 67" \ |
| ) |
| |
| #define umount_trivial_usage \ |
| "[flags] FILESYSTEM|DIRECTORY" |
| #define umount_full_usage "\n\n" \ |
| "Unmount file systems\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_UMOUNT_ALL( \ |
| "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ |
| ) \ |
| USE_FEATURE_MTAB_SUPPORT( \ |
| "\n -n Don't erase /etc/mtab entries" \ |
| ) \ |
| "\n -r Try to remount devices as read-only if mount is busy" \ |
| "\n -l Lazy umount (detach filesystem)" \ |
| "\n -f Force umount (i.e., unreachable NFS server)" \ |
| USE_FEATURE_MOUNT_LOOP( \ |
| "\n -d Free loop device if it has been used" \ |
| ) |
| |
| #define umount_example_usage \ |
| "$ umount /dev/hdc1\n" |
| |
| #define uname_trivial_usage \ |
| "[-amnrspv]" |
| #define uname_full_usage "\n\n" \ |
| "Print system information.\n" \ |
| "\nOptions:" \ |
| "\n -a Print all" \ |
| "\n -m The machine (hardware) type" \ |
| "\n -n Hostname" \ |
| "\n -r OS release" \ |
| "\n -s OS name (default)" \ |
| "\n -p Processor type" \ |
| "\n -v OS version" \ |
| |
| #define uname_example_usage \ |
| "$ uname -a\n" \ |
| "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" |
| |
| #define uncompress_trivial_usage \ |
| "[-c] [-f] [name...]" |
| #define uncompress_full_usage "\n\n" \ |
| "Uncompress .Z file[s]\n" \ |
| "\nOptions:" \ |
| "\n -c Extract to stdout" \ |
| "\n -f Overwrite an existing file" \ |
| |
| #define unexpand_trivial_usage \ |
| "[-f][-a][-t NUM] [FILE|-]" |
| #define unexpand_full_usage "\n\n" \ |
| "Convert spaces to tabs, writing to standard output.\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_UNEXPAND_LONG_OPTIONS( \ |
| "\n -a,--all Convert all blanks" \ |
| "\n -f,--first-only Convert only leading blanks" \ |
| "\n -t,--tabs=N Tabstops every N chars" \ |
| ) \ |
| SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \ |
| "\n -a Convert all blanks" \ |
| "\n -f Convert only leading blanks" \ |
| "\n -t N Tabstops every N chars" \ |
| ) |
| |
| #define uniq_trivial_usage \ |
| "[-fscduw]... [INPUT [OUTPUT]]" |
| #define uniq_full_usage "\n\n" \ |
| "Discard duplicate lines\n" \ |
| "\nOptions:" \ |
| "\n -c Prefix lines by the number of occurrences" \ |
| "\n -d Only print duplicate lines" \ |
| "\n -u Only print unique lines" \ |
| "\n -f N Skip first N fields" \ |
| "\n -s N Skip first N chars (after any skipped fields)" \ |
| "\n -w N Compare N characters in line" \ |
| |
| #define uniq_example_usage \ |
| "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" |
| |
| #define unix2dos_trivial_usage \ |
| "[option] [FILE]" |
| #define unix2dos_full_usage "\n\n" \ |
| "Convert FILE from unix to dos format.\n" \ |
| "When no file is given, use stdin/stdout.\n" \ |
| "\nOptions:" \ |
| "\n -u dos2unix" \ |
| "\n -d unix2dos" \ |
| |
| #define unzip_trivial_usage \ |
| "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" |
| #define unzip_full_usage "\n\n" \ |
| "Extract files from ZIP archives\n" \ |
| "\nOptions:" \ |
| "\n -l List archive contents (with -q for short form)" \ |
| "\n -n Never overwrite existing files (default)" \ |
| "\n -o Overwrite files without prompting" \ |
| "\n -p Send output to stdout" \ |
| "\n -q Quiet" \ |
| "\n -x Exclude these files" \ |
| "\n -d Extract files into this directory" \ |
| |
| #define uptime_trivial_usage \ |
| "" |
| #define uptime_full_usage "\n\n" \ |
| "Display the time since the last boot" |
| |
| #define uptime_example_usage \ |
| "$ uptime\n" \ |
| " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" |
| |
| #define usleep_trivial_usage \ |
| "N" |
| #define usleep_full_usage "\n\n" \ |
| "Pause for N microseconds" |
| |
| #define usleep_example_usage \ |
| "$ usleep 1000000\n" \ |
| "[pauses for 1 second]\n" |
| |
| #define uudecode_trivial_usage \ |
| "[-o outfile] [infile]" |
| #define uudecode_full_usage "\n\n" \ |
| "Uudecode a file\n" \ |
| "Finds outfile name in uuencoded source unless -o is given" |
| |
| #define uudecode_example_usage \ |
| "$ uudecode -o busybox busybox.uu\n" \ |
| "$ ls -l busybox\n" \ |
| "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" |
| |
| #define uuencode_trivial_usage \ |
| "[-m] [infile] stored_filename" |
| #define uuencode_full_usage "\n\n" \ |
| "Uuencode a file to stdout\n" \ |
| "\nOptions:" \ |
| "\n -m Use base64 encoding per RFC1521" \ |
| |
| #define uuencode_example_usage \ |
| "$ uuencode busybox busybox\n" \ |
| "begin 755 busybox\n" \ |
| "<encoded file snipped>\n" \ |
| "$ uudecode busybox busybox > busybox.uu\n" \ |
| "$\n" |
| |
| #define vconfig_trivial_usage \ |
| "COMMAND [OPTIONS]..." |
| #define vconfig_full_usage "\n\n" \ |
| "Create and remove virtual ethernet devices\n" \ |
| "\nOptions:" \ |
| "\n add [interface-name] [vlan_id]" \ |
| "\n rem [vlan-name]" \ |
| "\n set_flag [interface-name] [flag-num] [0 | 1]" \ |
| "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \ |
| "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \ |
| "\n set_name_type [name-type]" \ |
| |
| #define vi_trivial_usage \ |
| "[OPTION] [FILE]..." |
| #define vi_full_usage "\n\n" \ |
| "Edit FILE\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_VI_COLON( \ |
| "\n -c Initial command to run ($EXINIT also available)") \ |
| USE_FEATURE_VI_READONLY( \ |
| "\n -R Read-only - do not write to the file") \ |
| "\n -H Short help regarding available features" \ |
| |
| #define vlock_trivial_usage \ |
| "[OPTIONS]" |
| #define vlock_full_usage "\n\n" \ |
| "Lock a virtual terminal. A password is required to unlock.\n" \ |
| "\nOptions:" \ |
| "\n -a Lock all VTs" \ |
| |
| #define watch_trivial_usage \ |
| "[-n seconds] [-t] COMMAND..." |
| #define watch_full_usage "\n\n" \ |
| "Execute a program periodically\n" \ |
| "\nOptions:" \ |
| "\n -n Loop period in seconds (default 2)" \ |
| "\n -t Don't print header" \ |
| |
| #define watch_example_usage \ |
| "$ watch date\n" \ |
| "Mon Dec 17 10:31:40 GMT 2000\n" \ |
| "Mon Dec 17 10:31:42 GMT 2000\n" \ |
| "Mon Dec 17 10:31:44 GMT 2000" |
| |
| #define watchdog_trivial_usage \ |
| "[-t N[ms]] [-T N[ms]] [-F] DEV" |
| #define watchdog_full_usage "\n\n" \ |
| "Periodically write to watchdog device DEV\n" \ |
| "\nOptions:" \ |
| "\n -T N Reboot after N seconds if not reset (default 60)" \ |
| "\n -t N Reset every N seconds (default 30)" \ |
| "\n -F Run in foreground" \ |
| "\n" \ |
| "\nUse 500ms to specify period in milliseconds" \ |
| |
| #define wc_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define wc_full_usage "\n\n" \ |
| "Print line, word, and byte counts for each FILE, and a total line if\n" \ |
| "more than one FILE is specified. With no FILE, read standard input.\n" \ |
| "\nOptions:" \ |
| "\n -c Print the byte counts" \ |
| "\n -l Print the newline counts" \ |
| "\n -L Print the length of the longest line" \ |
| "\n -w Print the word counts" \ |
| |
| #define wc_example_usage \ |
| "$ wc /etc/passwd\n" \ |
| " 31 46 1365 /etc/passwd\n" |
| |
| #define wget_trivial_usage \ |
| USE_FEATURE_WGET_LONG_OPTIONS( \ |
| "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \ |
| " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ |
| " [-U|--user-agent agent] url" \ |
| ) \ |
| SKIP_FEATURE_WGET_LONG_OPTIONS( \ |
| "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \ |
| ) |
| #define wget_full_usage "\n\n" \ |
| "Retrieve files via HTTP or FTP\n" \ |
| "\nOptions:" \ |
| "\n -s Spider mode - only check file existence" \ |
| "\n -c Continue retrieval of aborted transfer" \ |
| "\n -q Quiet" \ |
| "\n -P Set directory prefix to DIR" \ |
| "\n -O Save to filename ('-' for stdout)" \ |
| "\n -U Adjust 'User-Agent' field" \ |
| "\n -Y Use proxy ('on' or 'off')" \ |
| |
| #define which_trivial_usage \ |
| "[COMMAND...]" |
| #define which_full_usage "\n\n" \ |
| "Locate a COMMAND" |
| #define which_example_usage \ |
| "$ which login\n" \ |
| "/bin/login\n" |
| |
| #define who_trivial_usage \ |
| "[-a]" |
| #define who_full_usage "\n\n" \ |
| "Show who is logged on\n" \ |
| "\nOptions:" \ |
| "\n -a show all" \ |
| |
| #define whoami_trivial_usage \ |
| "" |
| #define whoami_full_usage "\n\n" \ |
| "Print the user name associated with the current effective user id" |
| |
| #define xargs_trivial_usage \ |
| "[OPTIONS] [COMMAND] [ARGS...]" |
| #define xargs_full_usage "\n\n" \ |
| "Execute COMMAND on every item given by standard input\n" \ |
| "\nOptions:" \ |
| USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ |
| "\n -p Ask user whether to run each command") \ |
| "\n -r Do not run command if input is empty" \ |
| USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ |
| "\n -0 Input is separated by NUL characters") \ |
| "\n -t Print the command on stderr before execution" \ |
| "\n -e[STR] STR stops input processing" \ |
| "\n -n N Pass no more than N args to COMMAND" \ |
| "\n -s N Pass command line of no more than N bytes" \ |
| USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ |
| "\n -x Exit if size is exceeded") \ |
| |
| #define xargs_example_usage \ |
| "$ ls | xargs gzip\n" \ |
| "$ find . -name '*.c' -print | xargs rm\n" |
| |
| #define yes_trivial_usage \ |
| "[OPTION]... [STRING]..." |
| #define yes_full_usage "\n\n" \ |
| "Repeatedly output a line with all specified STRING(s), or 'y'" |
| |
| #define zcat_trivial_usage \ |
| "FILE" |
| #define zcat_full_usage "\n\n" \ |
| "Uncompress to stdout" |
| |
| #define zcip_trivial_usage \ |
| "[OPTIONS] ifname script" |
| #define zcip_full_usage "\n\n" \ |
| "Manage a ZeroConf IPv4 link-local address\n" \ |
| "\nOptions:" \ |
| "\n -f Run in foreground" \ |
| "\n -q Quit after obtaining address" \ |
| "\n -r 169.254.x.x Request this address first" \ |
| "\n -v Verbose" \ |
| "\n" \ |
| "\nWith no -q, runs continuously monitoring for ARP conflicts," \ |
| "\nexits only on I/O errors (link down etc)" \ |
| |
| #endif /* __BB_USAGE_H__ */ |