config: deindent all help texts
Those two spaces after tab have no effect, and always a nuisance when editing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src
index 43f3676..af2fe18 100644
--- a/networking/udhcp/Config.src
+++ b/networking/udhcp/Config.src
@@ -10,105 +10,105 @@
default y
select PLATFORM_LINUX
help
- udhcpd is a DHCP server geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpd is a DHCP server geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
config FEATURE_UDHCPD_WRITE_LEASES_EARLY
bool "Rewrite the lease file at every new acknowledge"
default y
depends on UDHCPD
help
- If selected, udhcpd will write a new file with leases every
- time a new lease has been accepted, thus eliminating the need
- to send SIGUSR1 for the initial writing or updating. Any timed
- rewriting remains undisturbed.
+ If selected, udhcpd will write a new file with leases every
+ time a new lease has been accepted, thus eliminating the need
+ to send SIGUSR1 for the initial writing or updating. Any timed
+ rewriting remains undisturbed.
config FEATURE_UDHCPD_BASE_IP_ON_MAC
bool "Select IP address based on client MAC"
default n
depends on UDHCPD
help
- If selected, udhcpd will base its selection of IP address to offer
- on the client's hardware address. Otherwise udhcpd uses the next
- consecutive free address.
+ If selected, udhcpd will base its selection of IP address to offer
+ on the client's hardware address. Otherwise udhcpd uses the next
+ consecutive free address.
- This reduces the frequency of IP address changes for clients
- which let their lease expire, and makes consecutive DHCPOFFERS
- for the same client to (almost always) contain the same
- IP address.
+ This reduces the frequency of IP address changes for clients
+ which let their lease expire, and makes consecutive DHCPOFFERS
+ for the same client to (almost always) contain the same
+ IP address.
config DHCPD_LEASES_FILE
string "Absolute path to lease file"
default "/var/lib/misc/udhcpd.leases"
depends on UDHCPD
help
- udhcpd stores addresses in a lease file. This is the absolute path
- of the file. Normally it is safe to leave it untouched.
+ udhcpd stores addresses in a lease file. This is the absolute path
+ of the file. Normally it is safe to leave it untouched.
config DUMPLEASES
bool "dumpleases (6.4 kb)"
default y
help
- dumpleases displays the leases written out by the udhcpd.
- Lease times are stored in the file by time remaining in lease, or
- by the absolute time that it expires in seconds from epoch.
+ dumpleases displays the leases written out by the udhcpd.
+ Lease times are stored in the file by time remaining in lease, or
+ by the absolute time that it expires in seconds from epoch.
config DHCPRELAY
bool "dhcprelay (5.8 kb)"
default y
help
- dhcprelay listens for dhcp requests on one or more interfaces
- and forwards these requests to a different interface or dhcp
- server.
+ dhcprelay listens for dhcp requests on one or more interfaces
+ and forwards these requests to a different interface or dhcp
+ server.
config UDHCPC
bool "udhcpc (DHCP client)"
default y
select PLATFORM_LINUX
help
- udhcpc is a DHCP client geared primarily toward embedded systems,
- while striving to be fully functional and RFC compliant.
+ udhcpc is a DHCP client geared primarily toward embedded systems,
+ while striving to be fully functional and RFC compliant.
- The udhcp client negotiates a lease with the DHCP server and
- runs a script when a lease is obtained or lost.
+ The udhcp client negotiates a lease with the DHCP server and
+ runs a script when a lease is obtained or lost.
config FEATURE_UDHCPC_ARPING
bool "Verify that the offered address is free, using ARP ping"
default y
depends on UDHCPC
help
- If selected, udhcpc will send ARP probes and make sure
- the offered address is really not in use by anyone. The client
- will DHCPDECLINE the offer if the address is in use,
- and restart the discover process.
+ If selected, udhcpc will send ARP probes and make sure
+ the offered address is really not in use by anyone. The client
+ will DHCPDECLINE the offer if the address is in use,
+ and restart the discover process.
config FEATURE_UDHCPC_SANITIZEOPT
bool "Do not pass malformed host and domain names"
default y
depends on UDHCPC
help
- If selected, udhcpc will check some options (such as option 12 -
- hostname) and if they don't look like valid hostnames
- (for example, if they start with dash or contain spaces),
- they will be replaced with string "bad" when exporting
- to the environment.
+ If selected, udhcpc will check some options (such as option 12 -
+ hostname) and if they don't look like valid hostnames
+ (for example, if they start with dash or contain spaces),
+ they will be replaced with string "bad" when exporting
+ to the environment.
config UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"
default "/usr/share/udhcpc/default.script"
depends on UDHCPC
help
- This script is called after udhcpc receives an answer. See
- examples/udhcp for a working example. Normally it is safe
- to leave this untouched.
+ This script is called after udhcpc receives an answer. See
+ examples/udhcp for a working example. Normally it is safe
+ to leave this untouched.
config FEATURE_UDHCP_PORT
bool "Enable '-P port' option for udhcpd and udhcpc"
default n
depends on UDHCPD || UDHCPC
help
- At the cost of ~300 bytes, enables -P port option.
- This feature is typically not needed.
+ At the cost of ~300 bytes, enables -P port option.
+ This feature is typically not needed.
config UDHCP_DEBUG
int "Maximum verbosity level for udhcp applets (0..9)"
@@ -116,28 +116,28 @@
range 0 9
depends on UDHCPD || UDHCPC || DHCPRELAY
help
- Verbosity can be increased with multiple -v options.
- This option controls how high it can be cranked up.
+ Verbosity can be increased with multiple -v options.
+ This option controls how high it can be cranked up.
- Bigger values result in bigger code. Levels above 1
- are very verbose and useful for debugging only.
+ Bigger values result in bigger code. Levels above 1
+ are very verbose and useful for debugging only.
config FEATURE_UDHCP_RFC3397
bool "Support RFC3397 domain search (experimental)"
default y
depends on UDHCPD || UDHCPC
help
- If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC 3397,
- and SIP servers option 120, specified in RFC 3361.
+ If selected, both client and server will support passing of domain
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
config FEATURE_UDHCP_8021Q
bool "Support 802.1Q VLAN parameters"
default y
depends on UDHCPD || UDHCPC
help
- If selected, both client and server will support passing of VLAN
- ID and priority via options 132 and 133 as per 802.1Q.
+ If selected, both client and server will support passing of VLAN
+ ID and priority via options 132 and 133 as per 802.1Q.
config UDHCPC_SLACK_FOR_BUGGY_SERVERS
int "DHCP options slack buffer size"
@@ -145,19 +145,19 @@
range 0 924
depends on UDHCPD || UDHCPC
help
- Some buggy DHCP servers send DHCP offer packets with option
- field larger than we expect (which might also be considered a
- buffer overflow attempt). These packets are normally discarded.
- If circumstances beyond your control force you to support such
- servers, this may help. The upper limit (924) makes dhcpc accept
- even 1500 byte packets (maximum-sized ethernet packets).
+ Some buggy DHCP servers send DHCP offer packets with option
+ field larger than we expect (which might also be considered a
+ buffer overflow attempt). These packets are normally discarded.
+ If circumstances beyond your control force you to support such
+ servers, this may help. The upper limit (924) makes dhcpc accept
+ even 1500 byte packets (maximum-sized ethernet packets).
- This option does not make dhcp[cd] emit non-standard
- sized packets.
+ This option does not make dhcp[cd] emit non-standard
+ sized packets.
- Known buggy DHCP servers:
- 3Com OfficeConnect Remote 812 ADSL Router:
- seems to confuse maximum allowed UDP packet size with
- maximum size of entire IP packet, and sends packets which are
- 28 bytes too large.
- Seednet (ISP) VDSL: sends packets 2 bytes too large.
+ Known buggy DHCP servers:
+ 3Com OfficeConnect Remote 812 ADSL Router:
+ seems to confuse maximum allowed UDP packet size with
+ maximum size of entire IP packet, and sends packets
+ which are 28 bytes too large.
+ Seednet (ISP) VDSL: sends packets 2 bytes too large.