| /* vi: set sw=8 ts=8: */ |
| /* |
| * This file suffers from chronically incorrect tabification |
| * of messages. Before editing this file: |
| * 1. Switch you editor to 8-space tab mode. |
| * 2. Do not use \t in messages, use real tab character. |
| * 3. Start each source line with message as follows: |
| * |<7 spaces>"text with tabs".... |
| */ |
| |
| #ifndef __BB_USAGE_H__ |
| #define __BB_USAGE_H__ |
| |
| #define addgroup_trivial_usage \ |
| "[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name" |
| #define addgroup_full_usage \ |
| "Add a group to the system"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \ |
| "\n\nOptions:\n" \ |
| " -g GID Group id" |
| |
| #define adduser_trivial_usage \ |
| "[OPTIONS] user_name" |
| #define adduser_full_usage \ |
| "Add a user to the system" \ |
| "\n\nOptions:\n" \ |
| " -h DIR Home directory\n" \ |
| " -g GECOS GECOS field\n" \ |
| " -s SHELL Login shell\n" \ |
| " -G GROUP Add user to existing group\n" \ |
| " -S Create a system user\n" \ |
| " -D Do not assign a password\n" \ |
| " -H Do not create home directory" |
| |
| #define adjtimex_trivial_usage \ |
| "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" |
| #define adjtimex_full_usage \ |
| "Read and optionally set system timebase parameters.\n" \ |
| "See adjtimex(2)." \ |
| "\n\nOptions:\n" \ |
| " -q Quiet\n" \ |
| " -o offset Time offset, microseconds\n" \ |
| " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \ |
| " (positive values make clock run faster)\n" \ |
| " -t tick Microseconds per tick, usually 10000\n" \ |
| " -p timeconstant" |
| |
| #define ar_trivial_usage \ |
| "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" |
| #define ar_full_usage \ |
| "Extract or list FILES from an ar archive" \ |
| "\n\nOptions:\n" \ |
| " -o Preserve original dates\n" \ |
| " -p Extract to stdout\n" \ |
| " -t List\n" \ |
| " -x Extract\n" \ |
| " -v Verbose" |
| |
| #define arp_trivial_usage \ |
| "\n" \ |
| "[-vn] [-H type] [-i if] -a [hostname]\n" \ |
| "[-v] [-i if] -d hostname [pub]\n" \ |
| "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \ |
| "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ |
| "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" |
| #define arp_full_usage \ |
| "Manipulate the system ARP cache" \ |
| "\n\nOptions:" \ |
| "\n -a Display (all) hosts" \ |
| "\n -s Set a new ARP entry" \ |
| "\n -d Delete a specified entry" \ |
| "\n -v Verbose" \ |
| "\n -n Don't resolve names" \ |
| "\n -i if Network interface (e.g. eth0)" \ |
| "\n -D Read <hwaddr> from given device" \ |
| "\n -A, -p Protocol family" \ |
| "\n -H hwtype Hardware address type" |
| |
| #define arping_trivial_usage \ |
| "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target" |
| #define arping_full_usage \ |
| "Ping hosts by ARP requests/replies" \ |
| "\n\nOptions:\n" \ |
| " -f Quit on first ARP reply\n" \ |
| " -q Quiet\n" \ |
| " -b Keep broadcasting, don't go unicast\n" \ |
| " -D Duplicated address detection mode\n" \ |
| " -U Unsolicited ARP mode, update your neighbors\n" \ |
| " -A ARP answer mode, update your neighbors\n" \ |
| " -c N Stop after sending N ARP requests\n" \ |
| " -w timeout Time to wait for ARP reply, in seconds\n" \ |
| " -I dev Interface to use (default eth0)\n" \ |
| " -s sender Sender IP address\n" \ |
| " target Target IP address" |
| |
| #define ash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: ash -c command [args]..." |
| #define ash_full_usage \ |
| "The ash shell (command interpreter)" |
| |
| #define awk_trivial_usage \ |
| "[OPTION]... [program-text] [FILE...]" |
| #define awk_full_usage \ |
| "Options:\n" \ |
| " -v var=val Set variable\n" \ |
| " -F sep Use sep as field separator\n" \ |
| " -f file Read program from file" |
| |
| #define basename_trivial_usage \ |
| "FILE [SUFFIX]" |
| #define basename_full_usage \ |
| "Strip directory path and suffixes from FILE.\n" \ |
| "If specified, also remove any trailing SUFFIX." |
| #define basename_example_usage \ |
| "$ basename /usr/local/bin/foo\n" \ |
| "foo\n" \ |
| "$ basename /usr/local/bin/\n" \ |
| "bin\n" \ |
| "$ basename /foo/bar.txt .txt\n" \ |
| "bar" |
| |
| #define bunzip2_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define bunzip2_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ |
| "\n\nOptions:\n" \ |
| " -c Write output to standard output\n" \ |
| " -f Force" |
| |
| #define bzip2_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define bzip2_full_usage \ |
| "Compress FILE(s) with bzip2 algorithm.\n" \ |
| "When FILE is '-' or unspecified, reads standard input. Implies -c." \ |
| "\n\nOptions:" \ |
| "\n -c Write output to standard output instead of FILE.bz2" \ |
| "\n -d Decompress" \ |
| "\n -f Force" \ |
| "\n -1..-9 Compression level" |
| |
| #define busybox_notes_usage \ |
| "Hello world!\n" |
| |
| #define bzcat_trivial_usage \ |
| "FILE" |
| #define bzcat_full_usage \ |
| "Uncompress to stdout" |
| |
| #define unlzma_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define unlzma_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ |
| "\n\nOptions:\n" \ |
| " -c Write output to standard output\n" \ |
| " -f Force" |
| |
| #define lzmacat_trivial_usage \ |
| "FILE" |
| #define lzmacat_full_usage \ |
| "Uncompress to stdout" |
| |
| #define cal_trivial_usage \ |
| "[-jy] [[month] year]" |
| #define cal_full_usage \ |
| "Display a calendar" \ |
| "\n\nOptions:" \ |
| "\n -j Use julian dates" \ |
| "\n -y Display the entire year" |
| |
| #define cat_trivial_usage \ |
| "[-u] [FILE]..." |
| #define cat_full_usage \ |
| "Concatenate FILE(s) and print them to stdout" \ |
| "\n\nOptions:" \ |
| "\n -u Use unbuffered i/o (ignored)" |
| #define cat_example_usage \ |
| "$ cat /proc/uptime\n" \ |
| "110716.72 17.67" |
| |
| #define catv_trivial_usage \ |
| "[-etv] [FILE]..." |
| #define catv_full_usage \ |
| "Display nonprinting characters as ^x or M-x" \ |
| "\n\nOptions:\n" \ |
| " -e End each line with $\n" \ |
| " -t Show tabs as ^I\n" \ |
| " -v Don't use ^x or M-x escapes" |
| #define chattr_trivial_usage \ |
| "[-R] [-+=AacDdijsStTu] [-v version] files..." |
| #define chattr_full_usage \ |
| "Change file attributes on an ext2 fs\n\n" \ |
| "Modifiers:\n" \ |
| " - Remove attributes\n" \ |
| " + Add attributes\n" \ |
| " = Set attributes\n" \ |
| "Attributes:\n" \ |
| " A Don't track atime\n" \ |
| " a Append mode only\n" \ |
| " c Enable compress\n" \ |
| " D Write dir contents synchronously\n" \ |
| " d Do not backup with dump\n" \ |
| " i Cannot be modified (immutable)\n" \ |
| " j Write all data to journal first\n" \ |
| " s Zero disk storage when deleted\n" \ |
| " S Write file contents synchronously\n" \ |
| " t Disable tail-merging of partial blocks with other files\n" \ |
| " u Allow file to be undeleted\n" \ |
| "Options:\n" \ |
| " -R Recursively list subdirectories\n" \ |
| " -v Set the file's version/generation number" |
| |
| #define chcon_trivial_usage \ |
| "[OPTIONS] CONTEXT FILE..." \ |
| "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \ |
| USE_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n chcon [OPTIONS] --reference=RFILE FILE..." \ |
| ) |
| #define chcon_full_usage \ |
| "Change the security context of each FILE to CONTEXT\n" \ |
| USE_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n -v,--verbose Verbose" \ |
| "\n -c,--changes Report changes made" \ |
| "\n -h,--no-dereference Affect symlinks instead of their targets" \ |
| "\n -f,--silent,--quiet Suppress most error messages" \ |
| "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ |
| "\n -u,--user=USER Set user USER in the target security context" \ |
| "\n -r,--role=ROLE Set role ROLE in the target security context" \ |
| "\n -t,--type=TYPE Set type TYPE in the target security context" \ |
| "\n -l,--range=RANGE Set range RANGE in the target security context" \ |
| "\n -R,--recursive Recurse subdirectories" \ |
| ) \ |
| SKIP_FEATURE_CHCON_LONG_OPTIONS( \ |
| "\n -v Verbose" \ |
| "\n -c Report changes made" \ |
| "\n -h Affect symlinks instead of their targets" \ |
| "\n -f Suppress most error messages" \ |
| "\n -u USER Set user USER in the target security context" \ |
| "\n -r ROLE Set role ROLE in the target security context" \ |
| "\n -t TYPE Set type TYPE in the target security context" \ |
| "\n -l RNG Set range RNE in the target security context" \ |
| "\n -R Recurse subdirectories" \ |
| ) |
| |
| |
| #define chmod_trivial_usage \ |
| "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." |
| #define chmod_full_usage \ |
| "Each MODE is one or more of the letters ugoa, one of the\n" \ |
| "symbols +-= and one or more of the letters rwxst" \ |
| "\n\nOptions:" \ |
| "\n -R Recurse directories" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v List all files" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chmod_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chmod u+x /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ |
| "$ chmod 444 /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chgrp_trivial_usage \ |
| "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..." |
| #define chgrp_full_usage \ |
| "Change the group membership of each FILE to GROUP" \ |
| "\n\nOptions:" \ |
| "\n -R Recurse directories" \ |
| "\n -h Affect symlinks instead of symlink targets" \ |
| "\n -L Traverse all symlinks to directories" \ |
| "\n -H Traverse symlinks on command line only" \ |
| "\n -P Do not traverse symlinks (default)" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v Verbose" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chgrp_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chgrp root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chown_trivial_usage \ |
| "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." |
| #define chown_full_usage \ |
| "Change the owner and/or group of each FILE to OWNER and/or GROUP" \ |
| "\n\nOptions:" \ |
| "\n -R Recurse directories" \ |
| "\n -h Affect symlinks instead of symlink targets" \ |
| "\n -L Traverse all symlinks to directories" \ |
| "\n -H Traverse symlinks on command line only" \ |
| "\n -P Do not traverse symlinks (default)" \ |
| USE_DESKTOP( \ |
| "\n -c List changed files" \ |
| "\n -v List all files" \ |
| "\n -f Hide errors" \ |
| ) |
| #define chown_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root.root /tmp/foo\n" \ |
| "ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chpst_trivial_usage \ |
| "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \ |
| "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ |
| "[-p processes] [-f bytes] [-c bytes] prog args" |
| #define chpst_full_usage \ |
| "Change the process state and run specified program" \ |
| "\n\nOptions:\n" \ |
| " -u user[:grp] Set uid and gid\n" \ |
| " -U user[:grp] Set environment variables UID and GID\n" \ |
| " -e dir Set environment variables as specified by files\n" \ |
| " in the directory: file=1st_line_of_file\n" \ |
| " -/ dir Chroot to dir\n" \ |
| " -n inc Add inc to nice value\n" \ |
| " -m bytes Limit data segment, stack segment, locked physical pages,\n" \ |
| " and total of all segment per process to bytes bytes each\n" \ |
| " -d bytes Limit data segment\n" \ |
| " -o n Limit the number of open file descriptors per process to n\n" \ |
| " -p n Limit number of processes per uid to n\n" \ |
| " -f bytes Limit output file size to bytes bytes\n" \ |
| " -c bytes Limit core file size to bytes bytes\n" \ |
| " -v Verbose\n" \ |
| " -P Run prog in a new process group\n" \ |
| " -0 Close standard input\n" \ |
| " -1 Close standard output\n" \ |
| " -2 Close standard error" |
| #define setuidgid_trivial_usage \ |
| "account prog args" |
| #define setuidgid_full_usage \ |
| "Set uid and gid to account's uid and gid, removing all supplementary\n" \ |
| "groups, then run prog" |
| #define envuidgid_trivial_usage \ |
| "account prog args" |
| #define envuidgid_full_usage \ |
| "Set $UID to account's uid and $GID to account's gid, then run prog" |
| #define envdir_trivial_usage \ |
| "dir prog args" |
| #define envdir_full_usage \ |
| "Set various environment variables as specified by files\n" \ |
| "in the directory dir, then run prog" |
| #define softlimit_trivial_usage \ |
| "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \ |
| "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \ |
| "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args" |
| #define softlimit_full_usage \ |
| "Set soft resource limits, then run prog" \ |
| "\n\nOptions:\n" \ |
| " -m n Same as -d n -s n -l n -a n\n" \ |
| " -d n Limit the data segment per process to n bytes\n" \ |
| " -s n Limit the stack segment per process to n bytes\n" \ |
| " -l n Limit the locked physical pages per process to n bytes\n" \ |
| " -a n Limit the total of all segments per process to n bytes\n" \ |
| " -o n Limit the number of open file descriptors per process to n\n" \ |
| " -p n Limit the number of processes per uid to n\n" \ |
| "Options controlling file sizes:\n" \ |
| " -f n Limit output file sizes to n bytes\n" \ |
| " -c n Limit core file sizes to n bytes\n" \ |
| "Efficiency opts:\n" \ |
| " -r n Limit the resident set size to n bytes. This limit is not\n" \ |
| " enforced unless physical memory is full\n" \ |
| " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \ |
| " except that the process receives a SIGXCPU signal after n seconds\n" \ |
| "\n" \ |
| "Some options may have no effect on some operating systems\n" \ |
| "n may be =, indicating that soft limit should be set equal to hard limit" |
| |
| #define chroot_trivial_usage \ |
| "NEWROOT [COMMAND...]" |
| #define chroot_full_usage \ |
| "Run COMMAND with root directory set to NEWROOT" |
| #define chroot_example_usage \ |
| "$ ls -l /bin/ls\n" \ |
| "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ |
| "# mount /dev/hdc1 /mnt -t minix\n" \ |
| "# chroot /mnt\n" \ |
| "# ls -l /bin/ls\n" \ |
| "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" |
| |
| #define chvt_trivial_usage \ |
| "N" |
| #define chvt_full_usage \ |
| "Change the foreground virtual terminal to /dev/ttyN" |
| |
| #define cksum_trivial_usage \ |
| "FILES..." |
| #define cksum_full_usage \ |
| "Calculate the CRC32 checksums of FILES" |
| |
| #define clear_trivial_usage \ |
| "" |
| #define clear_full_usage \ |
| "Clear screen" |
| |
| #define cmp_trivial_usage \ |
| "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]" |
| #define cmp_full_usage \ |
| "Compares FILE1 vs stdin if FILE2 is not specified" \ |
| "\n\nOptions:\n" \ |
| " -l Write the byte numbers (decimal) and values (octal)\n" \ |
| " for all differing bytes\n" \ |
| " -s Quiet" |
| |
| #define comm_trivial_usage \ |
| "[-123] FILE1 FILE2" |
| #define comm_full_usage \ |
| "Compare FILE1 to FILE2, or to stdin if - is specified" \ |
| "\n\nOptions:\n" \ |
| " -1 Suppress lines unique to FILE1\n" \ |
| " -2 Suppress lines unique to FILE2\n" \ |
| " -3 Suppress lines common to both files" |
| |
| #define bbconfig_trivial_usage \ |
| "" |
| #define bbconfig_full_usage \ |
| "Print the config file which built busybox" |
| |
| #define bbsh_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: bbsh -c command [args]..." |
| #define bbsh_full_usage \ |
| "The bbsh shell (command interpreter)" |
| |
| #define chrt_trivial_usage \ |
| "[OPTION]... [prio] [pid | command [arg]...]" |
| #define chrt_full_usage \ |
| "manipulate real-time attributes of a process" \ |
| "\n\nOptions:\n" \ |
| " -p operate on pid\n" \ |
| " -r set scheduling policy to SCHED_RR\n" \ |
| " -f set scheduling policy to SCHED_FIFO\n" \ |
| " -o set scheduling policy to SCHED_OTHER\n" \ |
| " -m show min and max priorities" |
| |
| #define chrt_example_usage \ |
| "$ chrt -r 4 sleep 900; x=$!\n" \ |
| "$ chrt -f -p 3 $x\n" \ |
| "You need CAP_SYS_NICE privileges to set scheduling attributes of a process" |
| |
| #define cp_trivial_usage \ |
| "[OPTION]... SOURCE DEST" |
| #define cp_full_usage \ |
| "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \ |
| "\n\nOptions:" \ |
| "\n -a Same as -dpR" \ |
| USE_SELINUX( \ |
| "\n -c Preserves security context" \ |
| ) \ |
| "\n -d,-P Preserve links" \ |
| "\n -H,-L Dereference all symlinks (default)" \ |
| "\n -p Preserve file attributes if possible" \ |
| "\n -f Force overwrite" \ |
| "\n -i Prompt before overwrite" \ |
| "\n -R,-r Recurse directories" \ |
| "\n -l,-s Create (sym)links" |
| |
| #define cpio_trivial_usage \ |
| "-[dimtuv][F cpiofile]" |
| #define cpio_full_usage \ |
| "Extract or list files from a cpio archive\n" \ |
| "Main operation mode:\n" \ |
| " d Make leading directories\n" \ |
| " i Extract\n" \ |
| " m Preserve mtime\n" \ |
| " t List\n" \ |
| " v Verbose\n" \ |
| " u Unconditional overwrite\n" \ |
| " F Input from file" |
| |
| #define crond_trivial_usage \ |
| "-d[#] -c crondir -f -b" |
| #define crond_full_usage \ |
| " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \ |
| " -d num Debug level\n" \ |
| " -l num Log level (8 - default)\n" \ |
| " -S Log to syslog (default)\n" \ |
| " -L file Log to file\n" \ |
| " -f Run in foreground\n" \ |
| " -b Run in background (default)\n" \ |
| " -c dir Working dir" |
| |
| #define crontab_trivial_usage \ |
| "[-c dir] {file|-}|[-u|-l|-e|-d user]" |
| #define crontab_full_usage \ |
| " file [opts] Replace crontab from file\n" \ |
| " - [opts] Replace crontab from stdin\n" \ |
| " -u user User\n" \ |
| " -l [user] List crontab for user\n" \ |
| " -e [user] Edit crontab for user\n" \ |
| " -d [user] Delete crontab for user\n" \ |
| " -c dir Crontab directory" |
| |
| #define cryptpw_trivial_usage \ |
| "[-a des|md5] [string]" |
| #define cryptpw_full_usage \ |
| "Outputs crypted string.\n" \ |
| "If string isn't supplied on cmdline, reads it from stdin.\n" \ |
| "\nOptions:" \ |
| "\n -a Algorithm to use (default: md5)" |
| |
| #define cut_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define cut_full_usage \ |
| "Print selected fields from each input FILE to standard output" \ |
| "\n\nOptions:\n" \ |
| " -b LIST Output only bytes from LIST\n" \ |
| " -c LIST Output only characters from LIST\n" \ |
| " -d CHAR Use CHAR instead of tab as the field delimiter\n" \ |
| " -s Output only the lines containing delimiter\n" \ |
| " -f N Print only these fields\n" \ |
| " -n Ignored" |
| #define cut_example_usage \ |
| "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ |
| "Hello\n" \ |
| "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ |
| "world\n" |
| |
| #define date_trivial_usage \ |
| "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" |
| #define date_full_usage \ |
| "Display current time in the given FORMAT, or set system date" \ |
| "\n\nOptions:\n" \ |
| " -R Outputs RFC-822 compliant date string\n" \ |
| " -d STRING Displays time described by STRING, not 'now'\n" \ |
| USE_FEATURE_DATE_ISOFMT( \ |
| " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \ |
| " TIMESPEC='date' (or missing) for date only,\n" \ |
| " 'hours', 'minutes', or 'seconds' for date and\n" \ |
| " time to the indicated precision\n" \ |
| " -D hint Use 'hint' as date format, via strptime()\n" \ |
| ) \ |
| " -s STRING Sets time described by STRING\n" \ |
| " -r FILE Displays the last modification time of FILE\n" \ |
| " -u Prints or sets Coordinated Universal Time" |
| #define date_example_usage \ |
| "$ date\n" \ |
| "Wed Apr 12 18:52:41 MDT 2000\n" |
| |
| #define dc_trivial_usage \ |
| "expression..." |
| #define dc_full_usage \ |
| "This is a Tiny RPN calculator that understands the\n" \ |
| "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ |
| "**, exp, and, or, not, eor.\n" \ |
| "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \ |
| "\n\nOptions:\n" \ |
| "p - Prints the value on the top of the stack, without altering the stack\n" \ |
| "f - Prints the entire contents of the stack without altering anything\n" \ |
| "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ |
| " Only 10 and 16 are supported" |
| #define dc_example_usage \ |
| "$ dc 2 2 + p\n" \ |
| "4\n" \ |
| "$ dc 8 8 \\* 2 2 + / p\n" \ |
| "16\n" \ |
| "$ dc 0 1 and p\n" \ |
| "0\n" \ |
| "$ dc 0 1 or p\n" \ |
| "1\n" \ |
| "$ echo 72 9 div 8 mul p | dc\n" \ |
| "64\n" |
| |
| #define dd_trivial_usage \ |
| "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ |
| " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") |
| #define dd_full_usage \ |
| "Copy a file with converting and formatting" \ |
| "\n\nOptions:\n" \ |
| " if=FILE Read from FILE instead of stdin\n" \ |
| " of=FILE Write to FILE instead of stdout\n" \ |
| " bs=N Read and write N bytes at a time\n" \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| " ibs=N Read N bytes at a time\n") \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| " obs=N Write N bytes at a time\n") \ |
| " count=N Copy only N input blocks\n" \ |
| " skip=N Skip N input blocks\n" \ |
| " seek=N Skip N output blocks\n" \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| " conv=notrunc Don't truncate output file\n" \ |
| " conv=noerror Continue after read errors\n" \ |
| " conv=sync Pad blocks with zeros\n") \ |
| "\n" \ |
| "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ |
| "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" |
| #define dd_example_usage \ |
| "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ |
| "4+0 records in\n" \ |
| "4+0 records out\n" |
| |
| #define deallocvt_trivial_usage \ |
| "[N]" |
| #define deallocvt_full_usage \ |
| "Deallocate unused virtual terminal /dev/ttyN" |
| |
| #define delgroup_trivial_usage \ |
| USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP" |
| #define delgroup_full_usage \ |
| "Delete group GROUP from the system" \ |
| USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP") |
| |
| #define deluser_trivial_usage \ |
| "USER" |
| #define deluser_full_usage \ |
| "Delete user USER from the system" |
| |
| #define devfsd_trivial_usage \ |
| "mntpnt [-v]" \ |
| USE_DEVFSD_FG_NP("[-fg][-np]") |
| #define devfsd_full_usage \ |
| "Manage devfs permissions and old device name symlinks" \ |
| "\n\nOptions:" \ |
| "\n mntpnt The mount point where devfs is mounted" \ |
| "\n -v Print the protocol version numbers for devfsd" \ |
| "\n and the kernel-side protocol version and exit" \ |
| USE_DEVFSD_FG_NP( \ |
| "\n -fg Run in foreground" \ |
| "\n -np Exit after parsing the configuration file" \ |
| "\n and processing synthetic REGISTER events," \ |
| "\n do not poll for events") |
| |
| /* -k is accepted but ignored for !HUMAN_READABLE, |
| * but we won't mention this (unimportant) */ |
| #if ENABLE_FEATURE_HUMAN_READABLE || ENABLE_FEATURE_DF_INODE |
| #define DF_HAS_OPTIONS(x) x |
| #else |
| #define DF_HAS_OPTIONS(x) |
| #endif |
| #define df_trivial_usage \ |
| DF_HAS_OPTIONS("[-") \ |
| USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \ |
| DF_HAS_OPTIONS("] ") "[FILESYSTEM...]" |
| #define df_full_usage \ |
| "Print filesystem usage statistics" \ |
| DF_HAS_OPTIONS("\n\nOptions:") \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n -h Human readable (e.g. 1K 243M 2G)" \ |
| "\n -m 1024*1024 blocks" \ |
| "\n -k 1024 blocks" \ |
| ) \ |
| USE_FEATURE_DF_INODE( \ |
| "\n -i Inodes" \ |
| ) |
| #define df_example_usage \ |
| "$ df\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" \ |
| "/dev/sda1 64216 36364 27852 57% /boot\n" \ |
| "$ df /dev/sda3\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" |
| |
| #define dhcprelay_trivial_usage \ |
| "[client_device_list] [server_device]" |
| #define dhcprelay_full_usage \ |
| "Relay dhcp requests from client devices to server device" |
| |
| #define dhcprelay_trivial_usage \ |
| "[client_device_list] [server_device]" |
| #define dhcprelay_full_usage \ |
| "Relay dhcp requests from client devices to server device" |
| |
| #define diff_trivial_usage \ |
| "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" |
| #define diff_full_usage \ |
| "Compare files line by line and output the differences between them.\n" \ |
| "This diff implementation only supports unified diffs." \ |
| "\n\nOptions:\n" \ |
| " -a Treat all files as text\n" \ |
| " -b Ignore changes in the amount of whitespace\n" \ |
| " -d Try hard to find a smaller set of changes\n" \ |
| " -i Ignore case differences\n" \ |
| " -L Use LABEL instead of the filename in the unified header\n" \ |
| " -N Treat absent files as empty\n" \ |
| " -q Output only whether files differ\n" \ |
| " -r Recursively compare subdirectories\n" \ |
| " -S Start with FILE when comparing directories\n" \ |
| " -T Make tabs line up by prefixing a tab when necessary\n" \ |
| " -s Report when two files are the same\n" \ |
| " -t Expand tabs to spaces in output\n" \ |
| " -U Output LINES lines of context\n" \ |
| " -w Ignore all whitespace" |
| |
| #define dirname_trivial_usage \ |
| "FILENAME" |
| #define dirname_full_usage \ |
| "Strip non-directory suffix from FILENAME" |
| #define dirname_example_usage \ |
| "$ dirname /tmp/foo\n" \ |
| "/tmp\n" \ |
| "$ dirname /tmp/foo/\n" \ |
| "/tmp\n" |
| |
| #define dmesg_trivial_usage \ |
| "[-c] [-n LEVEL] [-s SIZE]" |
| #define dmesg_full_usage \ |
| "Print or control the kernel ring buffer" \ |
| "\n\nOptions:\n" \ |
| " -c Clear ring buffer after printing\n" \ |
| " -n LEVEL Set console logging level\n" \ |
| " -s SIZE Buffer size" |
| |
| #define dnsd_trivial_usage \ |
| "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" |
| #define dnsd_full_usage \ |
| "Small and static DNS server daemon" \ |
| "\n\nOptions:\n" \ |
| " -c Config filename\n" \ |
| " -t TTL in seconds\n" \ |
| " -p Listening port\n" \ |
| " -i Listening ip (default all)\n" \ |
| " -d Daemonize" |
| |
| #define dos2unix_trivial_usage \ |
| "[option] [FILE]" |
| #define dos2unix_full_usage \ |
| "Convert FILE from dos format to unix format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, use stdin for input and stdout for output." \ |
| "\n\nOptions:\n" \ |
| " -u Output will be in UNIX format\n" \ |
| " -d Output will be in DOS format" |
| |
| #define dpkg_trivial_usage \ |
| "[-ilCPru] [-F option] package_name" |
| #define dpkg_full_usage \ |
| "Install, remove and manage Debian packages" \ |
| "\n\nOptions:\n" \ |
| " -i Install the package\n" \ |
| " -l List of installed packages\n" \ |
| " -C Configure an unpackaged package\n" \ |
| " -F depends Ignore dependency problems\n" \ |
| " -P Purge all files of a package\n" \ |
| " -r Remove all but the configuration files for a package\n" \ |
| " -u Unpack a package, but don't configure it" |
| |
| #define dpkg_deb_trivial_usage \ |
| "[-cefxX] FILE [argument]" |
| #define dpkg_deb_full_usage \ |
| "Perform actions on Debian packages (.debs)" \ |
| "\n\nOptions:\n" \ |
| " -c List contents of filesystem tree\n" \ |
| " -e Extract control files to [argument] directory\n" \ |
| " -f Display control field name starting with [argument]\n" \ |
| " -x Extract packages filesystem tree to directory\n" \ |
| " -X Verbose extract" |
| #define dpkg_deb_example_usage \ |
| "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" |
| |
| #define du_trivial_usage \ |
| "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." |
| #define du_full_usage \ |
| "Summarize disk space used for each FILE and/or directory.\n" \ |
| "Disk space is printed in units of " \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ |
| SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ |
| " bytes." \ |
| "\n\nOptions:\n" \ |
| " -a Show sizes of files in addition to directories\n" \ |
| " -H Follow symlinks that are FILE command line args\n" \ |
| " -L Follow all symlinks encountered\n" \ |
| " -d N Limit output to directories (and files with -a) of depth < N\n" \ |
| " -c Output a grand total\n" \ |
| " -l Count sizes many times if hard linked\n" \ |
| " -s Display only a total for each argument\n" \ |
| " -x Skip directories on different filesystems\n" \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| " -m Print sizes in megabytes\n" \ |
| ) \ |
| " -k Print sizes in kilobytes" \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)") |
| #define du_example_usage \ |
| "$ du\n" \ |
| "16 ./CVS\n" \ |
| "12 ./kernel-patches/CVS\n" \ |
| "80 ./kernel-patches\n" \ |
| "12 ./tests/CVS\n" \ |
| "36 ./tests\n" \ |
| "12 ./scripts/CVS\n" \ |
| "16 ./scripts\n" \ |
| "12 ./docs/CVS\n" \ |
| "104 ./docs\n" \ |
| "2417 .\n" |
| |
| #define dumpkmap_trivial_usage \ |
| "> keymap" |
| #define dumpkmap_full_usage \ |
| "Print out a binary keyboard translation table to standard output" |
| #define dumpkmap_example_usage \ |
| "$ dumpkmap > keymap\n" |
| |
| #define dumpleases_trivial_usage \ |
| "[-r|-a] [-f LEASEFILE]" |
| #define dumpleases_full_usage \ |
| "Display DHCP leases granted by udhcpd" \ |
| "\n\nOptions:\n" \ |
| USE_GETOPT_LONG( \ |
| " -f,--file=FILE Leases file to load\n" \ |
| " -r,--remaining Interpret lease times as time remaining\n" \ |
| " -a,--absolute Interpret lease times as expire time" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -f FILE Leases file to load\n" \ |
| " -r Interpret lease times as time remaining\n" \ |
| " -a Interpret lease times as expire time" \ |
| ) |
| |
| #define e2fsck_trivial_usage \ |
| "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ |
| "[-I inode_buffer_blocks] [-P process_inode_size] " \ |
| "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ |
| "[-E extended-options] device" |
| #define e2fsck_full_usage \ |
| "Check ext2/ext3 file system" \ |
| "\n\nOptions:\n" \ |
| " -p Automatic repair (no questions)\n" \ |
| " -n Make no changes to the filesystem\n" \ |
| " -y Assume 'yes' to all questions\n" \ |
| " -c Check for bad blocks and add them to the badblock list\n" \ |
| " -f Force checking even if filesystem is marked clean\n" \ |
| " -v Verbose\n" \ |
| " -b superblock Use alternative superblock\n" \ |
| " -B blocksize Force blocksize when looking for superblock\n" \ |
| " -j journal Set location of the external journal\n" \ |
| " -l file Add to badblocks list\n" \ |
| " -L file Set badblocks list" |
| |
| #define echo_trivial_usage \ |
| USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]" |
| #define echo_full_usage \ |
| "Print the specified ARGs to stdout" \ |
| USE_FEATURE_FANCY_ECHO( \ |
| "\n\nOptions:\n" \ |
| " -n Suppress trailing newline\n" \ |
| " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \ |
| " -E Disable interpretation of backslash-escaped characters" \ |
| ) |
| #define echo_example_usage \ |
| "$ echo \"Erik is cool\"\n" \ |
| "Erik is cool\n" \ |
| USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ |
| "Erik\n" \ |
| "is\n" \ |
| "cool\n" \ |
| "$ echo \"Erik\\nis\\ncool\"\n" \ |
| "Erik\\nis\\ncool\n") |
| |
| #define eject_trivial_usage \ |
| "[-t] [-T] [DEVICE]" |
| #define eject_full_usage \ |
| "Eject specified DEVICE (or default /dev/cdrom)" \ |
| "\n\nOptions:\n" \ |
| " -t Close tray\n" \ |
| " -T Open/close tray (toggle)" |
| |
| #define ed_trivial_usage "" |
| #define ed_full_usage "" |
| |
| #define env_trivial_usage \ |
| "[-iu] [-] [name=value]... [command]" |
| #define env_full_usage \ |
| "Print the current environment or run a program after setting\n" \ |
| "up the specified environment" \ |
| "\n\nOptions:\n" \ |
| " -, -i Start with an empty environment\n" \ |
| " -u Remove variable from the environment" |
| |
| #define ether_wake_trivial_usage \ |
| "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" |
| #define ether_wake_full_usage \ |
| "Send a magic packet to wake up sleeping machines.\n" \ |
| "MAC must be a station address (00:11:22:33:44:55) or\n" \ |
| "a hostname with a known 'ethers' entry." \ |
| "\n\nOptions:\n" \ |
| " -b Send wake-up packet to the broadcast address\n" \ |
| " -i iface Use interface ifname instead of the default \"eth0\"\n" \ |
| " -p pass Append the four or six byte password PW to the packet" |
| |
| #define expand_trivial_usage \ |
| "[-i] [-t NUM] [FILE|-]" |
| #define expand_full_usage \ |
| "Convert tabs to spaces, writing to standard output." \ |
| "\n\nOptions:" \ |
| USE_FEATURE_EXPAND_LONG_OPTIONS( \ |
| "\n -i,--initial Do not convert tabs after non blanks" \ |
| "\n -t,--tabs=N Tabstops every N chars" \ |
| ) \ |
| SKIP_FEATURE_EXPAND_LONG_OPTIONS( \ |
| "\n -i Do not convert tabs after non blanks" \ |
| "\n -t Tabstops every N chars" \ |
| ) |
| |
| #define expr_trivial_usage \ |
| "EXPRESSION" |
| #define expr_full_usage \ |
| "Print the value of EXPRESSION to standard output.\n\n" \ |
| "EXPRESSION may be:\n" \ |
| " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ |
| " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ |
| " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \ |
| " ARG1 <= ARG2\n" \ |
| " ARG1 = ARG2\n" \ |
| " ARG1 != ARG2\n" \ |
| " ARG1 >= ARG2\n" \ |
| " ARG1 > ARG2\n" \ |
| " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \ |
| " ARG1 - ARG2\n" \ |
| " ARG1 * ARG2\n" \ |
| " ARG1 / ARG2\n" \ |
| " ARG1 % ARG2\n" \ |
| " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ |
| " match STRING REGEXP Same as STRING : REGEXP\n" \ |
| " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ |
| " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ |
| " length STRING Length of STRING\n" \ |
| " quote TOKEN Interpret TOKEN as a string, even if\n" \ |
| " it is a keyword like 'match' or an\n" \ |
| " operator like '/'\n" \ |
| " (EXPRESSION) Value of EXPRESSION\n\n" \ |
| "Beware that many operators need to be escaped or quoted for shells.\n" \ |
| "Comparisons are arithmetic if both ARGs are numbers, else\n" \ |
| "lexicographical. Pattern matches return the string matched between\n" \ |
| "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ |
| "of characters matched or 0." |
| |
| #define fakeidentd_trivial_usage \ |
| "[-fiw] [-b ADDR] [STRING]" |
| #define fakeidentd_full_usage \ |
| "Provide fake ident (auth) service" \ |
| "\n\nOptions:" \ |
| "\n -f Run in foreground" \ |
| "\n -i Inetd mode" \ |
| "\n -w Inetd 'wait' mode" \ |
| "\n -b ADDR Bind to specified address" \ |
| "\n STRING Ident answer string (default is 'nobody')" |
| |
| #define false_trivial_usage \ |
| "" |
| #define false_full_usage \ |
| "Return an exit code of FALSE (1)" |
| #define false_example_usage \ |
| "$ false\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define fbset_trivial_usage \ |
| "[options] [mode]" |
| #define fbset_full_usage \ |
| "Show and modify frame buffer settings" |
| #define fbset_example_usage \ |
| "$ fbset\n" \ |
| "mode \"1024x768-76\"\n" \ |
| " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ |
| " geometry 1024 768 1024 768 16\n" \ |
| " timings 12714 128 32 16 4 128 4\n" \ |
| " accel false\n" \ |
| " rgba 5/11,6/5,5/0,0/0\n" \ |
| "endmode\n" |
| |
| #define fdflush_trivial_usage \ |
| "DEVICE" |
| #define fdflush_full_usage \ |
| "Force floppy disk drive to detect disk change" |
| |
| #define fdformat_trivial_usage \ |
| "[-n] DEVICE" |
| #define fdformat_full_usage \ |
| "Format floppy disk" \ |
| "\n\nOptions:\n" \ |
| " -n Don't verify after format" |
| |
| #define fdisk_trivial_usage \ |
| "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" |
| #define fdisk_full_usage \ |
| "Change partition table" \ |
| "\n\nOptions:\n" \ |
| " -l List partition table(s)\n" \ |
| " -u Give Start and End in sector (instead of cylinder) units\n" \ |
| " -s PARTITION Give partition size(s) in blocks\n" \ |
| " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \ |
| " -C CYLINDERS Set the number of cylinders\n" \ |
| " -H HEADS Set the number of heads\n" \ |
| " -S SECTORS Set the number of sectors\n" \ |
| " -v Give fdisk version" |
| |
| #define find_trivial_usage \ |
| "[PATH...] [EXPRESSION]" |
| #define find_full_usage \ |
| "Search for files in a directory hierarchy. The default PATH is\n" \ |
| "the current directory, default EXPRESSION is '-print'\n" \ |
| "\nEXPRESSION may consist of:" \ |
| "\n -follow Dereference symlinks" \ |
| USE_FEATURE_FIND_XDEV( \ |
| "\n -xdev Don't descend directories on other filesystems") \ |
| USE_FEATURE_FIND_MAXDEPTH( \ |
| "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \ |
| "\n tests/actions to command line arguments only") \ |
| "\n -name PATTERN File name (w/o directory name) matches PATTERN" \ |
| USE_FEATURE_FIND_PATH( \ |
| "\n -path PATTERN Path matches PATTERN") \ |
| USE_FEATURE_FIND_REGEX( \ |
| "\n -regex PATTERN Path matches regex PATTERN") \ |
| USE_FEATURE_FIND_TYPE( \ |
| "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \ |
| USE_FEATURE_FIND_PERM( \ |
| "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \ |
| "\n or exactly (NNN)") \ |
| USE_FEATURE_FIND_MTIME( \ |
| "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \ |
| "\n or exactly (N) days") \ |
| USE_FEATURE_FIND_MMIN( \ |
| "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \ |
| "\n or exactly (N) minutes") \ |
| USE_FEATURE_FIND_NEWER( \ |
| "\n -newer FILE Modified time is more recent than FILE's") \ |
| USE_FEATURE_FIND_INUM( \ |
| "\n -inum N File has inode number N") \ |
| USE_FEATURE_FIND_USER( \ |
| "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \ |
| USE_FEATURE_FIND_GROUP( \ |
| "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \ |
| USE_FEATURE_FIND_DEPTH( \ |
| "\n -depth Process directory name after traversing it") \ |
| USE_FEATURE_FIND_SIZE( \ |
| "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \ |
| "\n +/-N: file size is bigger/smaller than N") \ |
| "\n -print Print (default and assumed)" \ |
| USE_FEATURE_FIND_PRINT0( \ |
| "\n -print0 Delimit output with null characters rather than" \ |
| "\n newlines") \ |
| USE_FEATURE_FIND_CONTEXT ( \ |
| "\n -context File has specified security context") \ |
| USE_FEATURE_FIND_EXEC( \ |
| "\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \ |
| "\n matching files") \ |
| USE_FEATURE_FIND_PRUNE( \ |
| "\n -prune Stop traversing current subtree") \ |
| USE_FEATURE_FIND_DELETE( \ |
| "\n -delete Delete files, turns on -depth option") \ |
| USE_FEATURE_FIND_PAREN( \ |
| "\n (EXPR) Group an expression") \ |
| |
| #define find_example_usage \ |
| "$ find / -name passwd\n" \ |
| "/etc/passwd\n" |
| |
| #define fold_trivial_usage \ |
| "[-bs] [-w WIDTH] [FILE]" |
| #define fold_full_usage \ |
| "Wrap input lines in each FILE (standard input by default), writing to\n" \ |
| "standard output" \ |
| "\n\nOptions:\n" \ |
| " -b Count bytes rather than columns\n" \ |
| " -s Break at spaces\n" \ |
| " -w Use WIDTH columns instead of 80" |
| |
| #define free_trivial_usage \ |
| "" |
| #define free_full_usage \ |
| "Display the amount of free and used system memory" |
| #define free_example_usage \ |
| "$ free\n" \ |
| " total used free shared buffers\n" \ |
| " Mem: 257628 248724 8904 59644 93124\n" \ |
| " Swap: 128516 8404 120112\n" \ |
| "Total: 386144 257128 129016\n" \ |
| |
| #define freeramdisk_trivial_usage \ |
| "DEVICE" |
| #define freeramdisk_full_usage \ |
| "Free all memory used by the specified ramdisk" |
| #define freeramdisk_example_usage \ |
| "$ freeramdisk /dev/ram2\n" |
| |
| #define fsck_trivial_usage \ |
| "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]" |
| #define fsck_full_usage \ |
| "Check and repair filesystems" \ |
| "\n\nOptions:\n" \ |
| " -A Walk /etc/fstab and check all filesystems\n" \ |
| " -N Don't execute, just show what would be done\n" \ |
| " -P When using -A, check filesystems in parallel\n" \ |
| " -R When using -A, skip the root filesystem\n" \ |
| " -T Don't show title on startup\n" \ |
| " -V Verbose\n" \ |
| " -C n Write status information to specified filedescriptor\n" \ |
| " -t type List of filesystem types to check" |
| |
| #define fsck_minix_trivial_usage \ |
| "[-larvsmf] /dev/name" |
| #define fsck_minix_full_usage \ |
| "Perform a consistency check for MINIX filesystems" \ |
| "\n\nOptions:\n" \ |
| " -l List all filenames\n" \ |
| " -r Perform interactive repairs\n" \ |
| " -a Perform automatic repairs\n" \ |
| " -v Verbose\n" \ |
| " -s Output super-block information\n" \ |
| " -m Activate MINIX-like \"mode not cleared\" warnings\n" \ |
| " -f Force file system check" |
| |
| #define ftpget_trivial_usage \ |
| "[options] remote-host local-file remote-file" |
| #define ftpget_full_usage \ |
| "Retrieve a remote file via FTP" \ |
| "\n\nOptions:\n" \ |
| USE_GETOPT_LONG( \ |
| " -c,--continue Continue previous transfer\n" \ |
| " -v,--verbose Verbose\n" \ |
| " -u,--username Username\n" \ |
| " -p,--password Password\n" \ |
| " -P,--port Port number" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -c Continue previous transfer\n" \ |
| " -v Verbose\n" \ |
| " -u Username\n" \ |
| " -p Password\n" \ |
| " -P Port number" \ |
| ) |
| |
| #define ftpput_trivial_usage \ |
| "[options] remote-host remote-file local-file" |
| #define ftpput_full_usage \ |
| "Store a local file on a remote machine via FTP" \ |
| "\n\nOptions:\n" \ |
| USE_GETOPT_LONG( \ |
| " -v,--verbose Verbose\n" \ |
| " -u,--username Username\n" \ |
| " -p,--password Password\n" \ |
| " -P,--port Port number" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -v Verbose\n" \ |
| " -u Username\n" \ |
| " -p Password\n" \ |
| " -P Port number" \ |
| ) |
| |
| #define fuser_trivial_usage \ |
| "[options] file OR port/proto" |
| #define fuser_full_usage \ |
| "Options:\n" \ |
| " -m Show all processes on the same mounted fs\n" \ |
| " -k Kill all processes that match\n" \ |
| " -s Don't print or kill anything\n" \ |
| " -4 When using port/proto only search IPv4 space\n" \ |
| " -6 When using port/proto only search IPv6 space\n" \ |
| " -SIGNAL When used with -k, this signal will be used to kill" |
| |
| #define getenforce_trivial_usage |
| #define getenforce_full_usage |
| |
| #define getopt_trivial_usage \ |
| "[OPTIONS]..." |
| #define getopt_full_usage \ |
| "Parse command options\n" \ |
| USE_GETOPT_LONG( \ |
| " -a,--alternative Allow long options starting with single -\n" \ |
| " -l,--longoptions=longopts Long options to be recognized\n" \ |
| " -n,--name=progname The name under which errors are reported\n" \ |
| " -o,--options=optstring Short options to be recognized\n" \ |
| " -q,--quiet Disable error reporting by getopt(3)\n" \ |
| " -Q,--quiet-output No normal output\n" \ |
| " -s,--shell=shell Set shell quoting conventions\n" \ |
| " -T,--test Test for getopt(1) version\n" \ |
| " -u,--unquoted Don't quote the output" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -a Allow long options starting with single -\n" \ |
| " -l longopts Long options to be recognized\n" \ |
| " -n progname The name under which errors are reported\n" \ |
| " -o optstring Short options to be recognized\n" \ |
| " -q Disable error reporting by getopt(3)\n" \ |
| " -Q No normal output\n" \ |
| " -s shell Set shell quoting conventions\n" \ |
| " -T Test for getopt(1) version\n" \ |
| " -u Don't quote the output" \ |
| ) |
| #define getopt_example_usage \ |
| "$ cat getopt.test\n" \ |
| "#!/bin/sh\n" \ |
| "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ |
| " -n 'example.busybox' -- \"$@\"`\n" \ |
| "if [ $? != 0 ]; then exit 1; fi\n" \ |
| "eval set -- \"$GETOPT\"\n" \ |
| "while true; do\n" \ |
| " case $1 in\n" \ |
| " -a|--a-long) echo \"Option a\"; shift;;\n" \ |
| " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \ |
| " -c|--c-long)\n" \ |
| " case \"$2\" in\n" \ |
| " \"\") echo \"Option c, no argument\"; shift 2;;\n" \ |
| " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \ |
| " esac;;\n" \ |
| " --) shift; break;;\n" \ |
| " *) echo \"Internal error!\"; exit 1;;\n" \ |
| " esac\n" \ |
| "done\n" |
| |
| #define getsebool_trivial_usage \ |
| "-a or getsebool boolean..." |
| #define getsebool_full_usage \ |
| " -a Show all SELinux booleans" |
| |
| #define getty_trivial_usage \ |
| "[OPTIONS]... baud_rate,... line [termtype]" |
| #define getty_full_usage \ |
| "Open a tty, prompt for a login name, then invoke /bin/login" \ |
| "\n\nOptions:\n" \ |
| " -h Enable hardware (RTS/CTS) flow control\n" \ |
| " -i Do not display /etc/issue before running login\n" \ |
| " -L Local line, so do not do carrier detect\n" \ |
| " -m Get baud rate from modem's CONNECT status message\n" \ |
| " -w Wait for a CR or LF before sending /etc/issue\n" \ |
| " -n Do not prompt the user for a login name\n" \ |
| " -f issue_file Display issue_file instead of /etc/issue\n" \ |
| " -l login_app Invoke login_app instead of /bin/login\n" \ |
| " -t timeout Terminate after timeout if no username is read\n" \ |
| " -I initstring Sets the init string to send before anything else\n" \ |
| " -H login_host Log login_host into the utmp file as the hostname" |
| |
| #define grep_trivial_usage \ |
| "[-HhrilLnqvso" \ |
| USE_DESKTOP("w") \ |
| "eF" \ |
| USE_FEATURE_GREP_EGREP_ALIAS("E") \ |
| USE_FEATURE_GREP_CONTEXT("ABC") \ |
| "] PATTERN [FILEs...]" |
| #define grep_full_usage \ |
| "Search for PATTERN in each FILE or standard input" \ |
| "\n\nOptions:" \ |
| "\n -H Prefix output lines with filename where match was found" \ |
| "\n -h Suppress the prefixing filename on output" \ |
| "\n -r Recurse subdirectories" \ |
| "\n -i Ignore case distinctions" \ |
| "\n -l List names of files that match" \ |
| "\n -L List names of files that do not match" \ |
| "\n -n Print line number with output lines" \ |
| "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \ |
| "\n -v Select non-matching lines" \ |
| "\n -s Suppress file open/read error messages" \ |
| "\n -c Only print count of matching lines" \ |
| "\n -o Show only the part of a line that matches PATTERN" \ |
| "\n -m MAX Match up to MAX times per file" \ |
| USE_DESKTOP( \ |
| "\n -w Match whole words only") \ |
| "\n -F PATTERN is a set of newline-separated strings" \ |
| USE_FEATURE_GREP_EGREP_ALIAS( \ |
| "\n -E PATTERN is an extended regular expression") \ |
| "\n -e PTRN Pattern to match" \ |
| "\n -f FILE Read pattern from file" \ |
| USE_FEATURE_GREP_CONTEXT( \ |
| "\n -A Print NUM lines of trailing context" \ |
| "\n -B Print NUM lines of leading context" \ |
| "\n -C Print NUM lines of output context") \ |
| |
| #define grep_example_usage \ |
| "$ grep root /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "$ grep ^[rR]oo. /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" |
| |
| #define gunzip_trivial_usage \ |
| "[OPTION]... FILE" |
| #define gunzip_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-')" \ |
| "\n\nOptions:\n" \ |
| " -c Write output to standard output\n" \ |
| " -f Force\n" \ |
| " -t Test compressed file integrity" |
| #define gunzip_example_usage \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" |
| |
| #define gzip_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define gzip_full_usage \ |
| "Compress FILE(s) with maximum compression.\n" \ |
| "When FILE is '-' or unspecified, reads standard input. Implies -c." \ |
| "\n\nOptions:\n" \ |
| " -c Write output to standard output instead of FILE.gz\n" \ |
| " -d Decompress\n" \ |
| " -f Force" |
| #define gzip_example_usage \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ |
| "$ gzip /tmp/busybox.tar\n" \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" |
| |
| #define halt_trivial_usage \ |
| "[-d delay] [-n] [-f]" |
| #define halt_full_usage \ |
| "Halt the system" \ |
| "\n\nOptions:\n" \ |
| " -d Delay interval for halting\n" \ |
| " -n No call to sync()\n" \ |
| " -f Force halt (don't go through init)" |
| |
| #define hdparm_trivial_usage \ |
| "[options] [device] .." |
| #define hdparm_full_usage \ |
| USE_FEATURE_HDPARM_GET_IDENTITY( \ |
| "If no device name is specified try to read from stdin.\n\n") \ |
| "Options:\n" \ |
| " -a Get/set fs readahead\n" \ |
| " -A Set drive read-lookahead flag (0/1)\n" \ |
| " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ |
| " -B Set Advanced Power Management setting (1-255)\n" \ |
| " -c Get/set IDE 32-bit IO setting\n" \ |
| " -C Check IDE power mode status\n" \ |
| USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ |
| " -d Get/set using_dma flag\n") \ |
| " -D Enable/disable drive defect-mgmt\n" \ |
| " -f Flush buffer cache for device on exit\n" \ |
| " -g Display drive geometry\n" \ |
| " -h Display terse usage information\n" \ |
| USE_FEATURE_HDPARM_GET_IDENTITY( \ |
| " -i Display drive identification\n") \ |
| USE_FEATURE_HDPARM_GET_IDENTITY( \ |
| " -I Detailed/current information directly from drive\n") \ |
| " -k Get/set keep_settings_over_reset flag (0/1)\n" \ |
| " -K Set drive keep_features_over_reset flag (0/1)\n" \ |
| " -L Set drive doorlock (0/1) (removable harddisks only)\n" \ |
| " -m Get/set multiple sector count\n" \ |
| " -n Get/set ignore-write-errors flag (0/1)\n" \ |
| " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ |
| " -P Set drive prefetch count\n" \ |
| " -q Change next setting quietly\n" \ |
| " -Q Get/set DMA tagged-queuing depth (if supported)\n" \ |
| " -r Get/set readonly flag (DANGEROUS to set)\n" \ |
| USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ |
| " -R Register an IDE interface (DANGEROUS)\n") \ |
| " -S Set standby (spindown) timeout\n" \ |
| " -t Perform device read timings\n" \ |
| " -T Perform cache read timings\n" \ |
| " -u Get/set unmaskirq flag (0/1)\n" \ |
| USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ |
| " -U Un-register an IDE interface (DANGEROUS)\n") \ |
| " -v Defaults; same as -mcudkrag for IDE drives\n" \ |
| " -V Display program version and exit immediately\n" \ |
| USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ |
| " -w Perform device reset (DANGEROUS)\n") \ |
| " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \ |
| USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ |
| " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \ |
| " -X Set IDE xfer mode (DANGEROUS)\n" \ |
| " -y Put IDE drive in standby mode\n" \ |
| " -Y Put IDE drive to sleep\n" \ |
| " -Z Disable Seagate auto-powersaving mode\n" \ |
| " -z Re-read partition table" |
| |
| #define head_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define head_full_usage \ |
| "Print first 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input." \ |
| "\n\nOptions:" \ |
| "\n -n NUM Print first NUM lines instead of first 10" \ |
| USE_FEATURE_FANCY_HEAD( \ |
| "\n -c NUM Output the first NUM bytes" \ |
| "\n -q Never output headers giving file names" \ |
| "\n -v Always output headers giving file names") |
| #define head_example_usage \ |
| "$ head -n 2 /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" |
| |
| #define hexdump_trivial_usage \ |
| "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..." |
| #define hexdump_full_usage \ |
| "Display file(s) or standard input in a user specified format" \ |
| "\n\nOptions:" \ |
| "\n -b One-byte octal display" \ |
| "\n -c One-byte character display" \ |
| "\n -C Canonical hex+ASCII, 16 bytes per line" \ |
| "\n -d Two-byte decimal display" \ |
| "\n -e FORMAT STRING" \ |
| "\n -f FORMAT FILE" \ |
| "\n -n LENGTH Interpret only LENGTH bytes of input" \ |
| "\n -o Two-byte octal display" \ |
| "\n -s OFFSET Skip OFFSET bytes" \ |
| "\n -v Display all input data" \ |
| "\n -x Two-byte hexadecimal display" \ |
| USE_FEATURE_HEXDUMP_REVERSE( \ |
| "\n -R Reverse of 'hexdump -Cv'") \ |
| |
| #define hd_trivial_usage \ |
| "FILE..." |
| #define hd_full_usage \ |
| "hd is an alias for hexdump -C" |
| |
| #define hostid_trivial_usage \ |
| "" |
| #define hostid_full_usage \ |
| "Print out a unique 32-bit identifier for the machine" |
| |
| #define hostname_trivial_usage \ |
| "[OPTION] {hostname | -F FILE}" |
| #define hostname_full_usage \ |
| "Get or set the hostname or DNS domain name. If a hostname is given\n" \ |
| "(or FILE with the -F parameter), the host name will be set." \ |
| "\n\nOptions:\n" \ |
| " -s Short\n" \ |
| " -i Addresses for the hostname\n" \ |
| " -d DNS domain name\n" \ |
| " -f Fully qualified domain name\n" \ |
| " -F FILE Use the contents of FILE to specify the hostname" |
| #define hostname_example_usage \ |
| "$ hostname\n" \ |
| "sage\n" |
| |
| #define httpd_trivial_usage \ |
| "[-c conffile]" \ |
| " [-p [ip:]port]" \ |
| " [-i] [-f] [-v[v]]" \ |
| USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \ |
| USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ |
| " [-h home]" \ |
| " [-d/-e string]" |
| #define httpd_full_usage \ |
| "Listen for incoming HTTP requests" \ |
| "\n\nOptions:" \ |
| "\n -c FILE Configuration file (default httpd.conf)" \ |
| "\n -p [IP:]PORT Bind to ip:port (default *:80)" \ |
| "\n -i Inetd mode" \ |
| "\n -f Do not daemonize" \ |
| "\n -v[v] Verbose" \ |
| USE_FEATURE_HTTPD_SETUID( \ |
| "\n -u USER[:GRP] Set uid/gid after binding to port") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH( \ |
| "\n -r REALM Authentication Realm for Basic Authentication") \ |
| USE_FEATURE_HTTPD_AUTH_MD5( \ |
| "\n -m PASS Crypt PASS with md5 algorithm") \ |
| "\n -h HOME Home directory (default .)" \ |
| "\n -e STRING HTML encode STRING" \ |
| "\n -d STRING URL decode STRING" \ |
| |
| #define hwclock_trivial_usage \ |
| USE_GETOPT_LONG( \ |
| "[-r|--show] [-s|--hctosys] [-w|--systohc]" \ |
| " [-l|--localtime] [-u|--utc]" \ |
| " [-f FILE]" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \ |
| ) |
| #define hwclock_full_usage \ |
| "Query and set a hardware clock (RTC)" \ |
| "\n\nOptions:\n" \ |
| " -r Read hardware clock and print result\n" \ |
| " -s Set the system time from the hardware clock\n" \ |
| " -w Set the hardware clock to the system time\n" \ |
| " -u The hardware clock is kept in coordinated universal time\n" \ |
| " -l The hardware clock is kept in local time\n" \ |
| " -f FILE Use the specified clock (e.g. /dev/rtc2)" |
| |
| #define id_trivial_usage \ |
| "[OPTIONS]... [USERNAME]" |
| #define id_full_usage \ |
| "Print information for USERNAME or the current user" \ |
| "\n\nOptions:\n" \ |
| USE_SELINUX( \ |
| " -Z Prints only the security context\n" \ |
| ) \ |
| " -g Prints only the group ID\n" \ |
| " -u Prints only the user ID\n" \ |
| " -n Print a name instead of a number\n" \ |
| " -r Prints the real user ID instead of the effective ID" |
| #define id_example_usage \ |
| "$ id\n" \ |
| "uid=1000(andersen) gid=1000(andersen)\n" |
| |
| #define ifconfig_trivial_usage \ |
| USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]" |
| #define ifconfig_full_usage \ |
| "Configure a network interface" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_IPV6( \ |
| " [add ADDRESS[/PREFIXLEN]]\n") \ |
| USE_FEATURE_IPV6( \ |
| " [del ADDRESS[/PREFIXLEN]]\n") \ |
| " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \ |
| " [netmask ADDRESS] [dstaddr ADDRESS]\n" \ |
| USE_FEATURE_IFCONFIG_SLIP( \ |
| " [outfill NN] [keepalive NN]\n") \ |
| " " USE_FEATURE_IFCONFIG_HW("[hw ether ADDRESS] ") "[metric NN] [mtu NN]\n" \ |
| " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ |
| " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \ |
| USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ |
| " [mem_start NN] [io_addr NN] [irq NN]\n") \ |
| " [up|down] ..." |
| |
| #define ifup_trivial_usage \ |
| "[-ahinv] ifaces..." |
| #define ifup_full_usage \ |
| "Options:\n" \ |
| " -a De/configure all interfaces automatically\n" \ |
| " -i FILE Use FILE for interface definitions\n" \ |
| " -n Print out what would happen, but don't do it\n" \ |
| " (note that this option doesn't disable mappings)\n" \ |
| " -v Print out what would happen before doing it\n" \ |
| " -m Don't run any mappings\n" \ |
| " -f Force de/configuration" |
| |
| #define ifdown_trivial_usage \ |
| "[-ahinv] ifaces..." |
| #define ifdown_full_usage \ |
| "Options:\n" \ |
| " -a De/configure all interfaces automatically\n" \ |
| " -i FILE Use FILE for interface definitions\n" \ |
| " -n Print out what would happen, but don't do it\n" \ |
| " (note that this option doesn't disable mappings)\n" \ |
| " -v Print out what would happen before doing it\n" \ |
| " -m Don't run any mappings\n" \ |
| " -f Force de/configuration" |
| |
| #define inetd_trivial_usage \ |
| "[-f] [-q len] [conf]" |
| #define inetd_full_usage \ |
| "Listen for network connections and launch programs" \ |
| "\n\nOptions:\n" \ |
| " -f Run in foreground\n" \ |
| " -q N Set the size of the socket listen queue to N\n" \ |
| " (default: 128)" |
| |
| #define init_trivial_usage \ |
| "" |
| #define init_full_usage \ |
| "Init is the parent of all processes" |
| #define init_notes_usage \ |
| "This version of init is designed to be run only by the kernel.\n" \ |
| "\n" \ |
| "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ |
| "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ |
| "runlevels, use sysvinit.\n" \ |
| "\n" \ |
| "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ |
| "it has the following default behavior:\n" \ |
| "\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " ::askfirst:/bin/sh\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::restart:/sbin/init\n" \ |
| "\n" \ |
| "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ |
| "\n" \ |
| " tty2::askfirst:/bin/sh\n" \ |
| " tty3::askfirst:/bin/sh\n" \ |
| " tty4::askfirst:/bin/sh\n" \ |
| "\n" \ |
| "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ |
| "\n" \ |
| " <id>:<runlevels>:<action>:<process>\n" \ |
| "\n" \ |
| " <id>:\n" \ |
| "\n" \ |
| " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ |
| " The id field is used by BusyBox init to specify the controlling tty for\n" \ |
| " the specified process to run on. The contents of this field are\n" \ |
| " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ |
| " be unique, although if it isn't you may have strange results. If this\n" \ |
| " field is left blank, the controlling tty is set to the console. Also\n" \ |
| " note that if BusyBox detects that a serial console is in use, then only\n" \ |
| " entries whose controlling tty is either the serial console or /dev/null\n" \ |
| " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ |
| " stinkin' utmp.\n" \ |
| "\n" \ |
| " <runlevels>:\n" \ |
| "\n" \ |
| " The runlevels field is completely ignored.\n" \ |
| "\n" \ |
| " <action>:\n" \ |
| "\n" \ |
| " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ |
| " once, restart, ctrlaltdel, and shutdown.\n" \ |
| "\n" \ |
| " The available actions can be classified into two groups: actions\n" \ |
| " that are run only once, and actions that are re-run when the specified\n" \ |
| " process exits.\n" \ |
| "\n" \ |
| " Run only-once actions:\n" \ |
| "\n" \ |
| " 'sysinit' is the first item run on boot. init waits until all\n" \ |
| " sysinit actions are completed before continuing. Following the\n" \ |
| " completion of all sysinit actions, all 'wait' actions are run.\n" \ |
| " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ |
| " the specified task completes. 'once' actions are asynchronous,\n" \ |
| " therefore, init does not wait for them to complete. 'restart' is\n" \ |
| " the action taken to restart the init process. By default this should\n" \ |
| " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ |
| " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ |
| " actions are run when the system detects that someone on the system\n" \ |
| " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ |
| " wants to run 'reboot' at this point to cause the system to reboot.\n" \ |
| " Finally the 'shutdown' action specifies the actions to taken when\n" \ |
| " init is told to reboot. Unmounting filesystems and disabling swap\n" \ |
| " is a very good here.\n" \ |
| "\n" \ |
| " Run repeatedly actions:\n" \ |
| "\n" \ |
| " 'respawn' actions are run after the 'once' actions. When a process\n" \ |
| " started with a 'respawn' action exits, init automatically restarts\n" \ |
| " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ |
| " respawning out of control. The 'askfirst' actions acts just like\n" \ |
| " respawn, except that before running the specified process it\n" \ |
| " displays the line \"Please press Enter to activate this console.\"\n" \ |
| " and then waits for the user to press enter before starting the\n" \ |
| " specified process.\n" \ |
| "\n" \ |
| " Unrecognized actions (like initdefault) will cause init to emit an\n" \ |
| " error message, and then go along with its business. All actions are\n" \ |
| " run in the order they appear in /etc/inittab.\n" \ |
| "\n" \ |
| " <process>:\n" \ |
| "\n" \ |
| " Specifies the process to be executed and its command line.\n" \ |
| "\n" \ |
| "Example /etc/inittab file:\n" \ |
| "\n" \ |
| " # This is run first except when booting in single-user mode\n" \ |
| " #\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " \n" \ |
| " # /bin/sh invocations on selected ttys\n" \ |
| " #\n" \ |
| " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ |
| " ::askfirst:-/bin/sh\n" \ |
| " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ |
| " tty2::askfirst:-/bin/sh\n" \ |
| " tty3::askfirst:-/bin/sh\n" \ |
| " tty4::askfirst:-/bin/sh\n" \ |
| " \n" \ |
| " # /sbin/getty invocations for selected ttys\n" \ |
| " #\n" \ |
| " tty4::respawn:/sbin/getty 38400 tty4\n" \ |
| " tty5::respawn:/sbin/getty 38400 tty5\n" \ |
| " \n" \ |
| " \n" \ |
| " # Example of how to put a getty on a serial line (for a terminal)\n" \ |
| " #\n" \ |
| " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ |
| " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ |
| " #\n" \ |
| " # Example how to put a getty on a modem line\n" \ |
| " #::respawn:/sbin/getty 57600 ttyS2\n" \ |
| " \n" \ |
| " # Stuff to do when restarting the init process\n" \ |
| " ::restart:/sbin/init\n" \ |
| " \n" \ |
| " # Stuff to do before rebooting\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" |
| |
| #define insmod_trivial_usage \ |
| USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..." |
| #define insmod_full_usage \ |
| "Load the specified kernel modules into the kernel" \ |
| USE_FEATURE_2_4_MODULES( \ |
| "\n\nOptions:\n" \ |
| " -f Force module to load into the wrong kernel version\n" \ |
| " -k Make module autoclean-able\n" \ |
| " -v Verbose\n" \ |
| " -q Quiet\n" \ |
| " -L Lock to prevent simultaneous loads of a module\n" \ |
| USE_FEATURE_INSMOD_LOAD_MAP( \ |
| " -m Output load map to stdout\n" \ |
| ) \ |
| " -o NAME Set internal module name to NAME\n" \ |
| " -x Do not export externs" \ |
| ) |
| |
| #define install_trivial_usage \ |
| "[-cgmops] [sources] dest|directory" |
| #define install_full_usage \ |
| "Copy files and set attributes" \ |
| "\n\nOptions:\n" \ |
| " -c Copy the file, default\n" \ |
| " -d Create directories\n" \ |
| " -g Set group ownership\n" \ |
| " -m Set permissions\n" \ |
| " -o Set ownership\n" \ |
| " -p Preserve date\n" \ |
| " -s Strip symbol tables" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context of copy" \ |
| ) |
| /* would need to make the " | " optional depending on more than one selected */ |
| #define ip_trivial_usage \ |
| "[OPTIONS] {" \ |
| USE_FEATURE_IP_ADDRESS("address | ") \ |
| USE_FEATURE_IP_ROUTE("route | ") \ |
| USE_FEATURE_IP_LINK("link | ") \ |
| USE_FEATURE_IP_TUNNEL("tunnel | ") \ |
| USE_FEATURE_IP_RULE("rule") \ |
| "} {COMMAND}" |
| #define ip_full_usage \ |
| "ip [OPTIONS] OBJECT {COMMAND}\n" \ |
| "where OBJECT := {" \ |
| USE_FEATURE_IP_ADDRESS("address | ") \ |
| USE_FEATURE_IP_ROUTE("route | ") \ |
| USE_FEATURE_IP_LINK("link | ") \ |
| USE_FEATURE_IP_TUNNEL("tunnel | ") \ |
| USE_FEATURE_IP_RULE("rule") \ |
| "}\n" \ |
| "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" |
| |
| #define ipaddr_trivial_usage \ |
| "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ |
| " [dev STRING] [to PREFIX] }" |
| #define ipaddr_full_usage \ |
| "ipaddr {add|delete} IFADDR dev STRING\n" \ |
| "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \ |
| " [to PREFIX] [label PATTERN]\n" \ |
| " IFADDR := PREFIX | ADDR peer PREFIX\n" \ |
| " [broadcast ADDR] [anycast ADDR]\n" \ |
| " [label STRING] [scope SCOPE-ID]\n" \ |
| " SCOPE-ID := [host | link | global | NUMBER]" |
| |
| #define ipcalc_trivial_usage \ |
| "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]" |
| #define ipcalc_full_usage \ |
| "Calculate IP network settings from a IP address" \ |
| "\n\nOptions:" \ |
| USE_FEATURE_IPCALC_LONG_OPTIONS( \ |
| "\n -b,--broadcast Display calculated broadcast address" \ |
| "\n -n,--network Display calculated network address" \ |
| "\n -m,--netmask Display default netmask for IP" \ |
| USE_FEATURE_IPCALC_FANCY( \ |
| "\n -p,--prefix Display the prefix for IP/NETMASK" \ |
| "\n -h,--hostname Display first resolved host name" \ |
| "\n -s,--silent Don't ever display error messages" \ |
| ) \ |
| ) \ |
| SKIP_FEATURE_IPCALC_LONG_OPTIONS( \ |
| "\n -b Display calculated broadcast address" \ |
| "\n -n Display calculated network address" \ |
| "\n -m Display default netmask for IP" \ |
| USE_FEATURE_IPCALC_FANCY( \ |
| "\n -p Display the prefix for IP/NETMASK" \ |
| "\n -h Display first resolved host name" \ |
| "\n -s Don't ever display error messages" \ |
| ) \ |
| ) |
| |
| #define ipcrm_trivial_usage \ |
| "[-[MQS] key] [-[mqs] id]" |
| #define ipcrm_full_usage \ |
| "The upper-case options MQS are used to remove a shared memory segment by a\n" \ |
| "segment by a shmkey value. The lower-case options mqs are used\n" \ |
| "to remove a segment by shmid value.\n" \ |
| "\n\nOptions:\n" \ |
| " -[mM] Remove the memory segment after the last detach\n" \ |
| " -[qQ] Remove the message queue\n" \ |
| " -[sS] Remove the semaphore" |
| |
| #define ipcs_trivial_usage \ |
| "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" |
| #define ipcs_full_usage \ |
| " -i Show a specific resource\n" \ |
| "Resource specification:\n" \ |
| " -m Shared memory segments\n" \ |
| " -q Message queues\n" \ |
| " -s Semaphore arrays\n" \ |
| " -a All (default)\n" \ |
| "Output format:\n" \ |
| " -t Time\n" \ |
| " -c Creator\n" \ |
| " -p Pid\n" \ |
| " -l Limits\n" \ |
| " -u Summary" |
| |
| #define iplink_trivial_usage \ |
| "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }" |
| #define iplink_full_usage \ |
| "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ |
| " dynamic { on | off } |\n" \ |
| " mtu MTU }\n" \ |
| "iplink show [DEVICE]" |
| |
| #define iproute_trivial_usage \ |
| "{ list | flush | { add | del | change | append |\n" \ |
| " replace | monitor } ROUTE }" |
| #define iproute_full_usage \ |
| "iproute { list | flush } SELECTOR\n" \ |
| "iproute get ADDRESS [from ADDRESS iif STRING]\n" \ |
| " [oif STRING] [tos TOS]\n" \ |
| "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ |
| " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ |
| " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" |
| |
| #define iprule_trivial_usage \ |
| "{[list | add | del] RULE}" |
| #define iprule_full_usage \ |
| "iprule [list | add | del] SELECTOR ACTION\n" \ |
| " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \ |
| " [dev STRING] [pref NUMBER]\n" \ |
| " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \ |
| " [prohibit | reject | unreachable]\n" \ |
| " [realms [SRCREALM/]DSTREALM]\n" \ |
| " TABLE_ID := [local | main | default | NUMBER]" |
| |
| #define iptunnel_trivial_usage \ |
| "{ add | change | del | show } [NAME]\n" \ |
| " [mode { ipip | gre | sit }]\n" \ |
| " [remote ADDR] [local ADDR] [ttl TTL]" |
| #define iptunnel_full_usage \ |
| "iptunnel { add | change | del | show } [NAME]\n" \ |
| " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \ |
| " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ |
| " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" |
| |
| #define kbd_mode_trivial_usage \ |
| "[-a|k|s|u]" |
| #define kbd_mode_full_usage \ |
| "Report or set the keyboard mode" \ |
| "\n\nOptions set mode:\n" \ |
| " -a Default (ASCII)\n" \ |
| " -k Medium-raw (keyboard)\n" \ |
| " -s Raw (scancode)\n" \ |
| " -u Unicode (utf-8)" |
| |
| #define kill_trivial_usage \ |
| "[-l] [-signal] process-id [process-id...]" |
| #define kill_full_usage \ |
| "Send a signal (default is TERM) to the specified process(es)" \ |
| "\n\nOptions:\n" \ |
| " -l List all signal names and numbers" |
| #define kill_example_usage \ |
| "$ ps | grep apache\n" \ |
| "252 root root S [apache]\n" \ |
| "263 www-data www-data S [apache]\n" \ |
| "264 www-data www-data S [apache]\n" \ |
| "265 www-data www-data S [apache]\n" \ |
| "266 www-data www-data S [apache]\n" \ |
| "267 www-data www-data S [apache]\n" \ |
| "$ kill 252\n" |
| |
| #define killall_trivial_usage \ |
| "[-l] [-q] [-signal] process-name [process-name...]" |
| #define killall_full_usage \ |
| "Send a signal (default is TERM) to the specified process(es)" \ |
| "\n\nOptions:\n" \ |
| " -l List all signal names and numbers\n" \ |
| " -q Do not complain if no processes were killed" |
| #define killall_example_usage \ |
| "$ killall apache\n" |
| |
| #define killall5_trivial_usage \ |
| "[-l] [-signal]" |
| #define killall5_full_usage \ |
| "Send a signal (default is TERM) to all processes outside current session" \ |
| "\n\nOptions:\n" \ |
| " -l List all signal names and numbers\n" \ |
| |
| #define klogd_trivial_usage \ |
| "[-c n] [-n]" |
| #define klogd_full_usage \ |
| "Kernel logger" \ |
| "\n\nOptions:\n" \ |
| " -c n Sets the default log level of console messages to n\n" \ |
| " -n Run in foreground" |
| |
| #define length_trivial_usage \ |
| "STRING" |
| #define length_full_usage \ |
| "Print out the length of the specified STRING" |
| #define length_example_usage \ |
| "$ length Hello\n" \ |
| "5\n" |
| |
| #define less_trivial_usage \ |
| "[-EMNmh~?] FILE1 FILE2..." |
| #define less_full_usage \ |
| "View a file or list of files. The position within files can be\n" \ |
| "changed, and files can be manipulated in various ways." \ |
| "\n\nOptions:\n" \ |
| " -E Quit once the end of a file is reached\n" \ |
| " -M,-m Display a status line containing the current line numbers\n" \ |
| " and the percentage through the file\n" \ |
| " -N Prefix line numbers to each line\n" \ |
| " -~ Suppress ~s displayed when input past the end of the file is\n" \ |
| " reached" |
| |
| #define setarch_trivial_usage \ |
| "personality program [args...]" |
| #define setarch_full_usage \ |
| "Personality may be:\n" \ |
| " linux32 Set 32bit uname emulation\n" \ |
| " linux64 Set 64bit uname emulation" |
| |
| #define ln_trivial_usage \ |
| "[OPTION] TARGET... LINK_NAME|DIRECTORY" |
| #define ln_full_usage \ |
| "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ |
| "You may use '--' to indicate that all following arguments are non-options." \ |
| "\n\nOptions:\n" \ |
| " -s Make symlinks instead of hardlinks\n" \ |
| " -f Remove existing destination files\n" \ |
| " -n Don't dereference symlinks - treat like normal file\n" \ |
| " -b Make a backup of the target (if exists) before link operation\n" \ |
| " -S suf Use suffix instead of ~ when making backup files" |
| #define ln_example_usage \ |
| "$ ln -s BusyBox /tmp/ls\n" \ |
| "$ ls -l /tmp/ls\n" \ |
| "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" |
| |
| #define load_policy_trivial_usage |
| |
| #define load_policy_full_usage |
| |
| #define loadfont_trivial_usage \ |
| "< font" |
| #define loadfont_full_usage \ |
| "Load a console font from standard input" |
| #define loadfont_example_usage \ |
| "$ loadfont < /etc/i18n/fontname\n" |
| |
| #define loadkmap_trivial_usage \ |
| "< keymap" |
| #define loadkmap_full_usage \ |
| "Load a binary keyboard translation table from standard input" |
| #define loadkmap_example_usage \ |
| "$ loadkmap < /etc/i18n/lang-keymap\n" |
| |
| #define logger_trivial_usage \ |
| "[OPTION]... [MESSAGE]" |
| #define logger_full_usage \ |
| "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \ |
| "\n\nOptions:\n" \ |
| " -s Log to stderr as well as the system log\n" \ |
| " -t TAG Log using the specified tag (defaults to user name)\n" \ |
| " -p PRIO Enter the message with the specified priority.\n" \ |
| " This may be numerical or a 'facility.level' pair." |
| #define logger_example_usage \ |
| "$ logger \"hello\"\n" |
| |
| #define login_trivial_usage \ |
| "[OPTION]... [username] [ENV=VAR...]" |
| #define login_full_usage \ |
| "Begin a new session on the system" \ |
| "\n\nOptions:\n" \ |
| " -f Do not authenticate (user already authenticated)\n" \ |
| " -h Name of the remote host for this login\n" \ |
| " -p Preserve environment" |
| |
| #define logname_trivial_usage \ |
| "" |
| #define logname_full_usage \ |
| "Print the name of the current user" |
| #define logname_example_usage \ |
| "$ logname\n" \ |
| "root\n" |
| |
| #define logread_trivial_usage \ |
| "[OPTION]..." |
| #define logread_full_usage \ |
| "Show the messages from syslogd (using circular buffer)" \ |
| "\n\nOptions:\n" \ |
| " -f Output data as the log grows" |
| |
| #define losetup_trivial_usage \ |
| "[-o OFS] LOOPDEV FILE - associate loop devices\n" \ |
| " losetup -d LOOPDEV - disassociate\n" \ |
| " losetup [-f] - show" |
| #define losetup_full_usage \ |
| "Options:\n" \ |
| " -o OFS Start OFS bytes into FILE\n" \ |
| " -f Show first free loop device" |
| #define losetup_notes_usage \ |
| "No arguments will display all current associations.\n" \ |
| "One argument (losetup /dev/loop1) will display the current association\n" \ |
| "(if any), or disassociate it (with -d). The display shows the offset\n" \ |
| "and filename of the file the loop device is currently bound to.\n\n" \ |
| "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ |
| "with an optional offset (-o 12345). Encryption is not yet supported.\n" \ |
| "losetup -f will show the first loop free loop device\n\n" |
| |
| #define ls_trivial_usage \ |
| "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \ |
| USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \ |
| USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \ |
| USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \ |
| USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \ |
| USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \ |
| USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ |
| USE_SELINUX("K") "] [filenames...]" |
| #define ls_full_usage \ |
| "List directory contents" \ |
| "\n\nOptions:" \ |
| "\n -1 List files in a single column" \ |
| "\n -A Do not list implied . and .." \ |
| "\n -a Do not hide entries starting with ." \ |
| "\n -C List entries by columns" \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -c With -l: show ctime") \ |
| USE_FEATURE_LS_COLOR( \ |
| "\n --color[={always,never,auto}] Control coloring") \ |
| "\n -d List directory entries instead of contents" \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -e List both full date and full time") \ |
| USE_FEATURE_LS_FILETYPES( \ |
| "\n -F Append indicator (one of */=@|) to entries") \ |
| "\n -i List the i-node for each file" \ |
| "\n -l Use a long listing format" \ |
| "\n -n List numeric UIDs and GIDs instead of names" \ |
| USE_FEATURE_LS_FILETYPES( \ |
| "\n -p Append indicator (one of /=@|) to entries") \ |
| USE_FEATURE_LS_FOLLOWLINKS( \ |
| "\n -L List entries pointed to by symlinks") \ |
| USE_FEATURE_LS_RECURSIVE( \ |
| "\n -R List subdirectories recursively") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -r Sort the listing in reverse order") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -S Sort the listing by file size") \ |
| "\n -s List the size of each file, in blocks" \ |
| USE_FEATURE_AUTOWIDTH( \ |
| "\n -T NUM Assume Tabstop every NUM columns") \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -t With -l: show modification time") \ |
| USE_FEATURE_LS_TIMESTAMPS( \ |
| "\n -u With -l: show access time") \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -v Sort the listing by version") \ |
| USE_FEATURE_AUTOWIDTH( \ |
| "\n -w NUM Assume the terminal is NUM columns wide") \ |
| "\n -x List entries by lines instead of by columns" \ |
| USE_FEATURE_LS_SORTFILES( \ |
| "\n -X Sort the listing by extension") \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ |
| USE_SELINUX( \ |
| "\n -k Print security context") \ |
| USE_SELINUX( \ |
| "\n -K Print security context in long format") \ |
| USE_SELINUX( \ |
| "\n -Z Print security context and permission") |
| |
| #define lsattr_trivial_usage \ |
| "[-Radlv] [files...]" |
| #define lsattr_full_usage \ |
| "List file attributes on an ext2 fs" \ |
| "\n\nOptions:\n" \ |
| " -R Recursively list subdirectories\n" \ |
| " -a Do not hide entries starting with .\n" \ |
| " -d List directory entries instead of contents\n" \ |
| " -l Print long flag names\n" \ |
| " -v List the file's version/generation number" |
| |
| #define lsmod_trivial_usage \ |
| "" |
| #define lsmod_full_usage \ |
| "List the currently loaded kernel modules" |
| |
| #if ENABLE_FEATURE_MAKEDEVS_LEAF |
| #define makedevs_trivial_usage \ |
| "NAME TYPE MAJOR MINOR FIRST LAST [s]" |
| #define makedevs_full_usage \ |
| "Create a range of block or character special files\n\n" \ |
| "TYPEs include:\n" \ |
| " b: Make a block (buffered) device\n" \ |
| " c or u: Make a character (un-buffered) device\n" \ |
| " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \ |
| "\n" \ |
| "FIRST specifies the number appended to NAME to create the first device.\n" \ |
| "LAST specifies the number of the last item that should be created\n" \ |
| "If 's' is the last argument, the base device is created as well.\n\n" \ |
| "For example:\n" \ |
| " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ |
| " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" |
| #define makedevs_example_usage \ |
| "# makedevs /dev/ttyS c 4 66 2 63\n" \ |
| "[creates ttyS2-ttyS63]\n" \ |
| "# makedevs /dev/hda b 3 0 0 8 s\n" \ |
| "[creates hda,hda1-hda8]\n" |
| #endif |
| |
| #if ENABLE_FEATURE_MAKEDEVS_TABLE |
| #define makedevs_trivial_usage \ |
| "[-d device_table] rootdir" |
| #define makedevs_full_usage \ |
| "Create a range of special files as specified in a device table.\n" \ |
| "Device table entries take the form of:\n" \ |
| "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \ |
| "Where name is the file name, type can be one of:\n" \ |
| " f A regular file\n" \ |
| " d Directory\n" \ |
| " c Character special device file\n" \ |
| " b Block special device file\n" \ |
| " p Fifo (named pipe)\n" \ |
| "uid is the user id for the target file, gid is the group id for the\n" \ |
| "target file. The rest of the entries (major, minor, etc) apply to\n" \ |
| "to device special files. A '-' may be used for blank entries." |
| #define makedevs_example_usage \ |
| "For example:\n" \ |
| "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \ |
| "/dev d 755 0 0 - - - - -\n" \ |
| "/dev/console c 666 0 0 5 1 - - -\n" \ |
| "/dev/null c 666 0 0 1 3 0 0 -\n" \ |
| "/dev/zero c 666 0 0 1 5 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 0 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ |
| "Will Produce:\n" \ |
| "/dev\n" \ |
| "/dev/console\n" \ |
| "/dev/null\n" \ |
| "/dev/zero\n" \ |
| "/dev/hda\n" \ |
| "/dev/hda[0-15]\n" |
| #endif |
| |
| #define matchpathcon_trivial_usage \ |
| "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" |
| #define matchpathcon_full_usage \ |
| " -n Do not display path" \ |
| "\n -N Do not use translations" \ |
| "\n -f Use alternate file_context file" \ |
| "\n -p Use prefix to speed translations" \ |
| "\n -V Verify file context on disk matches defaults" |
| |
| #define md5sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") |
| #define md5sum_full_usage \ |
| "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ |
| "\n\nOptions:\n" \ |
| "With no FILE, or when FILE is -, read standard input." \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ |
| " -c Check MD5 sums against given list\n" \ |
| "\nThe following two options are useful only when verifying checksums:\n" \ |
| " -s Don't output anything, status code shows success\n" \ |
| " -w Warn about improperly formatted MD5 checksum lines") |
| #define md5sum_example_usage \ |
| "$ md5sum < busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003\n" \ |
| "$ md5sum busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "$ md5sum -c -\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "busybox: OK\n" \ |
| "^D\n" |
| |
| #define mdev_trivial_usage \ |
| "[-s]" |
| #define mdev_full_usage \ |
| " -s Scan /sys and populate /dev during system boot\n\n" \ |
| "Called with no options (via hotplug) it uses environment variables\n" \ |
| "to determine which device to add/remove." |
| #define mdev_notes_usage "" \ |
| USE_FEATURE_MDEV_CONFIG( \ |
| "The mdev config file contains lines that look like:\n" \ |
| " hd[a-z][0-9]* 0:3 660\n\n" \ |
| "That's device name (with regex match), uid:gid, and permissions.\n\n" \ |
| USE_FEATURE_MDEV_EXEC( \ |
| "Optionally, that can be followed (on the same line) by a special character\n" \ |
| "and a command line to run after creating/before deleting the corresponding\n" \ |
| "device(s). The environment variable $MDEV indicates the active device node\n" \ |
| "(which is useful if it's a regex match). For example:\n\n" \ |
| " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ |
| "The special characters are @ (run after creating), $ (run before deleting),\n" \ |
| "and * (run both after creating and before deleting). The commands run in\n" \ |
| "the /dev directory, and use system() which calls /bin/sh.\n\n" \ |
| ) \ |
| "Config file parsing stops on the first matching line. If no config\n" \ |
| "entry is matched, devices are created with default 0:0 660. (Make\n" \ |
| "the last line match .* to override this.)\n\n" \ |
| ) |
| |
| #define mesg_trivial_usage \ |
| "[y|n]" |
| #define mesg_full_usage \ |
| "Control write access to your terminal\n" \ |
| " y Allow write access to your terminal\n" \ |
| " n Disallow write access to your terminal" |
| |
| #define microcom_trivial_usage \ |
| "[-s speed] tty-name" |
| #define microcom_full_usage \ |
| "" |
| |
| #define mkdir_trivial_usage \ |
| "[OPTION] DIRECTORY..." |
| #define mkdir_full_usage \ |
| "Create the DIRECTORY(ies) if they do not already exist" \ |
| "\n\nOptions:\n" \ |
| " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \ |
| " -p No error if existing, make parent directories as needed" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mkdir_example_usage \ |
| "$ mkdir /tmp/foo\n" \ |
| "$ mkdir /tmp/foo\n" \ |
| "/tmp/foo: File exists\n" \ |
| "$ mkdir /tmp/foo/bar/baz\n" \ |
| "/tmp/foo/bar/baz: No such file or directory\n" \ |
| "$ mkdir -p /tmp/foo/bar/baz\n" |
| |
| #define mke2fs_trivial_usage \ |
| "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ |
| "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ |
| "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ |
| "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ |
| "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ |
| "device [blocks-count]" |
| #define mke2fs_full_usage \ |
| " -b size Block size in bytes\n" \ |
| " -c Check for bad blocks before creating\n" \ |
| " -E opts Set extended options\n" \ |
| " -f size Fragment size in bytes\n" \ |
| " -F Force (ignore sanity checks)\n" \ |
| " -g num Number of blocks in a block group\n" \ |
| " -i ratio The bytes/inode ratio\n" \ |
| " -j Create a journal (ext3)\n" \ |
| " -J opts Set journal options (size/device)\n" \ |
| " -l file Read bad blocks list from file\n" \ |
| " -L lbl Set the volume label\n" \ |
| " -m percent Percent of fs blocks to reserve for admin\n" \ |
| " -M dir Set last mounted directory\n" \ |
| " -n Do not actually create anything\n" \ |
| " -N num Number of inodes to create\n" \ |
| " -o os Set the 'creator os' field\n" \ |
| " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \ |
| " -q Quiet\n" \ |
| " -r rev Set filesystem revision\n" \ |
| " -S Write superblock and group descriptors only\n" \ |
| " -T fs-type Set usage type (news/largefile/largefile4)\n" \ |
| " -v Verbose" |
| |
| #define mkfifo_trivial_usage \ |
| "[OPTIONS] name" |
| #define mkfifo_full_usage \ |
| "Create a named pipe (identical to 'mknod name p')" \ |
| "\n\nOptions:\n" \ |
| " -m Create the pipe using the specified mode (default a=rw)" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mkfs_minix_trivial_usage \ |
| "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" |
| #define mkfs_minix_full_usage \ |
| "Make a MINIX filesystem" \ |
| "\n\nOptions:\n" \ |
| " -c Check device for bad blocks\n" \ |
| " -n [14|30] Maximum length of filenames\n" \ |
| " -i INODES Number of inodes for the filesystem\n" \ |
| " -l FILENAME Read bad blocks list from FILENAME\n" \ |
| " -v Make a Minix version 2 filesystem" |
| |
| #define mknod_trivial_usage \ |
| "[OPTIONS] NAME TYPE MAJOR MINOR" |
| #define mknod_full_usage \ |
| "Create a special file (block, character, or pipe)" \ |
| "\n\nOptions:\n" \ |
| " -m Create the special file using the specified mode (default a=rw)" \ |
| "\n\nTYPEs include:\n" \ |
| " b: Make a block (buffered) device\n" \ |
| " c or u: Make a character (un-buffered) device\n" \ |
| " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \ |
| USE_SELINUX( \ |
| "\n -Z Set security context" \ |
| ) |
| |
| #define mknod_example_usage \ |
| "$ mknod /dev/fd0 b 2 0\n" \ |
| "$ mknod -m 644 /tmp/pipe p\n" |
| |
| #define mkswap_trivial_usage \ |
| "[-c] [-v0|-v1] device [block-count]" |
| #define mkswap_full_usage \ |
| "Prepare a disk partition to be used as swap partition" \ |
| "\n\nOptions:\n" \ |
| " -c Check for read-ability\n" \ |
| " -v0 Make version 0 swap [max 128 Megs]\n" \ |
| " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \ |
| " block-count Number of block to use (default is entire partition)" |
| |
| #define mktemp_trivial_usage \ |
| "[-dq] TEMPLATE" |
| #define mktemp_full_usage \ |
| "Create a temporary file with its name based on TEMPLATE.\n" \ |
| "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \ |
| "\n\nOptions:\n" \ |
| " -d Make a directory instead of a file\n" \ |
| " -q Fail silently if an error occurs" |
| #define mktemp_example_usage \ |
| "$ mktemp /tmp/temp.XXXXXX\n" \ |
| "/tmp/temp.mWiLjM\n" \ |
| "$ ls -la /tmp/temp.mWiLjM\n" \ |
| "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" |
| |
| #define modprobe_trivial_usage \ |
| "[-knqrsv] MODULE [symbol=value...]" |
| #define modprobe_full_usage \ |
| "Options:\n" \ |
| " -k Make module autoclean-able\n" \ |
| " -n Dry run\n" \ |
| " -q Quiet\n" \ |
| " -r Remove module (stacks) or do autoclean\n" \ |
| " -s Report via syslog instead of stderr\n" \ |
| " -v Verbose" |
| #define modprobe_notes_usage \ |
| "modprobe can (un)load a stack of modules, passing each module options (when\n" \ |
| "loading). modprobe uses a configuration file to determine what option(s) to\n" \ |
| "pass each module it loads.\n" \ |
| "\n" \ |
| "The configuration file is searched (in order) amongst:\n" \ |
| "\n" \ |
| " /etc/modprobe.conf (2.6 only)\n" \ |
| " /etc/modules.conf\n" \ |
| " /etc/conf.modules (deprecated)\n" \ |
| "\n" \ |
| "They all have the same syntax (see below). If none is present, it is\n" \ |
| "_not_ an error; each loaded module is then expected to load without\n" \ |
| "options. Once a file is found, the others are tested for.\n" \ |
| "\n" \ |
| "/etc/modules.conf entry format:\n" \ |
| "\n" \ |
| " alias <alias_name> <mod_name>\n" \ |
| " Makes it possible to modprobe alias_name, when there is no such module.\n" \ |
| " It makes sense if your mod_name is long, or you want a more representative\n" \ |
| " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ |
| " This makes it also possible to use a different set of options (below) for\n" \ |
| " the module and the alias.\n" \ |
| " A module can be aliased more than once.\n" \ |
| "\n" \ |
| " options <mod_name|alias_name> <symbol=value...>\n" \ |
| " When loading module mod_name (or the module aliased by alias_name), pass\n" \ |
| " the \"symbol=value\" pairs as option to that module.\n" \ |
| "\n" \ |
| "Sample /etc/modules.conf file:\n" \ |
| "\n" \ |
| " options tulip irq=3\n" \ |
| " alias tulip tulip2\n" \ |
| " options tulip2 irq=4 io=0x308\n" \ |
| "\n" \ |
| "Other functionality offered by 'classic' modprobe is not available in\n" \ |
| "this implementation.\n" \ |
| "\n" \ |
| "If module options are present both in the config file, and on the command line,\n" \ |
| "then the options from the command line will be passed to the module _after_\n" \ |
| "the options from the config file. That way, you can have defaults in the config\n" \ |
| "file, and override them for a specific usage from the command line.\n" |
| #define modprobe_example_usage \ |
| "(with the above /etc/modules.conf):\n\n" \ |
| "$ modprobe tulip\n" \ |
| " will load the module 'tulip' with default option 'irq=3'\n\n" \ |
| "$ modprobe tulip irq=5\n" \ |
| " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ |
| "$ modprobe tulip2\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ |
| " which are the default for alias 'tulip2'\n\n" \ |
| "$ modprobe tulip2 irq=8\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ |
| " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ |
| " from the command line\n\n" \ |
| "$ modprobe tulip2 irq=2 io=0x210\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ |
| " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ |
| " from the command line\n" |
| |
| #define more_trivial_usage \ |
| "[FILE...]" |
| #define more_full_usage \ |
| "View FILE or standard input one screenful at a time" |
| #define more_example_usage \ |
| "$ dmesg | more\n" |
| |
| #define mount_trivial_usage \ |
| "[flags] DEVICE NODE [-o options,more-options]" |
| #define mount_full_usage \ |
| "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \ |
| "\n\nOptions:\n" \ |
| " -a Mount all filesystems in fstab\n" \ |
| USE_FEATURE_MTAB_SUPPORT( \ |
| " -f Update /etc/mtab, but don't mount\n" \ |
| " -n Don't update /etc/mtab\n" \ |
| ) \ |
| " -r Read-only mount\n" \ |
| " -t fs-type Filesystem type\n" \ |
| " -w Read-write mount (default)\n" \ |
| "\n" \ |
| "-o option:\n" \ |
| USE_FEATURE_MOUNT_LOOP( \ |
| " loop Ignored (loop devices are autodetected)\n" \ |
| ) \ |
| USE_FEATURE_MOUNT_FLAGS( \ |
| " [a]sync Writes are asynchronous / synchronous\n" \ |
| " [no]atime Disable / enable updates to inode access times\n" \ |
| " [no]diratime Disable / enable atime updates to directories\n" \ |
| " [no]dev Allow use of special device files / disallow them\n" \ |
| " [no]exec Allow use of executable files / disallow them\n" \ |
| " [no]suid Allow set-user-id-root programs / disallow them\n" \ |
| " [r]shared Convert [recursively] to a shared subtree\n" \ |
| " [r]slave Convert [recursively] to a slave subtree\n" \ |
| " [r]private Convert [recursively] to a private subtree\n" \ |
| " [un]bindable Make mount point [un]able to be bind mounted\n" \ |
| " bind Bind a directory to an additional location\n" \ |
| " move Relocate an existing mount point\n" \ |
| ) \ |
| " remount Remount a mounted filesystem, changing its flags\n" \ |
| " ro/rw Mount for read-only / read-write\n" \ |
| "\n" \ |
| "There are EVEN MORE flags that are specific to each filesystem\n" \ |
| "You'll have to see the written documentation for those filesystems" |
| #define mount_example_usage \ |
| "$ mount\n" \ |
| "/dev/hda3 on / type minix (rw)\n" \ |
| "proc on /proc type proc (rw)\n" \ |
| "devpts on /dev/pts type devpts (rw)\n" \ |
| "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ |
| "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ |
| "$ mount cd_image.iso mydir\n" |
| #define mount_notes_usage \ |
| "Returns 0 for success, number of failed mounts for -a, or errno for one mount." |
| |
| #define mountpoint_trivial_usage \ |
| "[-q] <[-d] DIR | -x DEVICE>" |
| #define mountpoint_full_usage \ |
| "mountpoint checks if the directory is a mountpoint" \ |
| "\n\nOptions:\n" \ |
| " -q Quiet\n" \ |
| " -d Print major/minor device number of the filesystem\n" \ |
| " -x Print major/minor device number of the blockdevice" |
| #define mountpoint_example_usage \ |
| "$ mountpoint /proc\n" \ |
| "/proc is not a mountpoint\n" \ |
| "$ mountpoint /sys\n" \ |
| "/sys is a mountpoint\n" |
| |
| #define mt_trivial_usage \ |
| "[-f device] opcode value" |
| #define mt_full_usage \ |
| "Control magnetic tape drive operation\n" \ |
| "\nAvailable Opcodes:\n\n" \ |
| "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ |
| "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ |
| "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ |
| "setpart tell unload unlock weof wset" |
| |
| #define mv_trivial_usage \ |
| "[OPTION]... SOURCE DEST\n" \ |
| "or: mv [OPTION]... SOURCE... DIRECTORY" |
| #define mv_full_usage \ |
| "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \ |
| "\n\nOptions:\n" \ |
| " -f Don't prompt before overwriting\n" \ |
| " -i Interactive, prompt before overwrite" |
| #define mv_example_usage \ |
| "$ mv /tmp/foo /bin/bar\n" |
| |
| #define nameif_trivial_usage \ |
| "[-s] [-c FILE] [{IFNAME MACADDR}]" |
| #define nameif_full_usage \ |
| "Rename network interface while it in the down state" \ |
| "\n\nOptions:\n" \ |
| " -c FILE Use configuration file (default is /etc/mactab)\n" \ |
| " -s Use syslog (LOCAL0 facility)\n" \ |
| " IFNAME MACADDR new_interface_name interface_mac_address" |
| #define nameif_example_usage \ |
| "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ |
| " or\n" \ |
| "$ nameif -c /etc/my_mactab_file\n" \ |
| |
| #if !ENABLE_DESKTOP |
| |
| #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA |
| #define NC_OPTIONS_STR "\n\nOptions:" |
| #else |
| #define NC_OPTIONS_STR |
| #endif |
| |
| #define nc_trivial_usage \ |
| USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \ |
| "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]") |
| #define nc_full_usage \ |
| "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ |
| NC_OPTIONS_STR \ |
| USE_NC_EXTRA( \ |
| "\n -e Exec rest of command line after connect" \ |
| "\n -i SECS Delay interval for lines sent" \ |
| "\n -w SECS Timeout for connect" \ |
| "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ |
| ) \ |
| USE_NC_SERVER( \ |
| "\n -l Listen mode, for inbound connects" \ |
| USE_NC_EXTRA( \ |
| "\n (use -l twice with -e for persistent server)") \ |
| "\n -p PORT Local port number" \ |
| ) |
| |
| #define nc_notes_usage "" \ |
| USE_NC_EXTRA( \ |
| "To use netcat as a terminal emulator on a serial port:\n\n" \ |
| "$ stty 115200 -F /dev/ttyS0\n" \ |
| "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ |
| ) |
| |
| #define nc_example_usage \ |
| "$ nc foobar.somedomain.com 25\n" \ |
| "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ |
| "help\n" \ |
| "214-Commands supported:\n" \ |
| "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ |
| "214 NOOP QUIT RSET HELP\n" \ |
| "quit\n" \ |
| "221 foobar closing connection\n" |
| |
| #else /* DESKTOP nc - much more compatible with nc 1.10 */ |
| |
| #define nc_trivial_usage \ |
| "[-options] hostname port - connect" \ |
| USE_NC_SERVER("\nnc [-options] -l -p port [hostname] [port] - listen") |
| #define nc_full_usage \ |
| USE_NC_SERVER( \ |
| "-l Listen mode, for inbound connects\n" \ |
| ) \ |
| "-n Don't do DNS resolution" \ |
| "\n-s addr Local address" \ |
| "\n-p port Local port" \ |
| "\n-u UDP mode" \ |
| "\n-v Verbose (cumulative: -vv)" \ |
| "\n-w secs Timeout for connects and final net reads" \ |
| USE_NC_EXTRA( \ |
| "\n-i sec Delay interval for lines sent" /* ", ports scanned" */ \ |
| "\n-o file Hex dump of traffic" \ |
| "\n-z Zero-I/O mode (scanning)" \ |
| ) \ |
| "\n-e prog [args] Program to exec after connect (must be last)" \ |
| /* "\n-r Randomize local and remote ports" */ |
| /* "\n-g gateway Source-routing hop point[s], up to 8" */ |
| /* "\n-G num Source-routing pointer: 4, 8, 12, ..." */ |
| /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */ |
| |
| #endif |
| |
| #define netstat_trivial_usage \ |
| "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]" |
| #define netstat_full_usage \ |
| "Display networking information" \ |
| "\n\nOptions:" \ |
| "\n -l Display listening server sockets" \ |
| "\n -a Display all sockets (default: connected)" \ |
| "\n -e Display other/more information" \ |
| "\n -n Don't resolve names" \ |
| "\n -t Tcp sockets" \ |
| "\n -u Udp sockets" \ |
| "\n -w Raw sockets" \ |
| "\n -x Unix sockets" \ |
| "\n -r Display routing table" \ |
| USE_FEATURE_NETSTAT_WIDE( \ |
| "\n -W Display with no column truncation" \ |
| ) |
| |
| #define nice_trivial_usage \ |
| "[-n ADJUST] [COMMAND [ARG]...]" |
| #define nice_full_usage \ |
| "Run a program with modified scheduling priority" \ |
| "\n\nOptions:\n" \ |
| " -n ADJUST Adjust the scheduling priority by ADJUST" |
| |
| #define nmeter_trivial_usage \ |
| "format_string" |
| #define nmeter_full_usage \ |
| "Monitor system in real time\n\n" \ |
| "Format specifiers:\n" \ |
| "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \ |
| " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \ |
| "%[niface] Monitor network interface 'iface'\n" \ |
| "%m Monitor allocated memory\n" \ |
| "%[mf] Monitor free memory\n" \ |
| "%[mt] Monitor total memory\n" \ |
| "%s Monitor allocated swap\n" \ |
| "%f Monitor number of used file descriptors\n" \ |
| "%Ni Monitor total/specific IRQ rate\n" \ |
| "%x Monitor context switch rate\n" \ |
| "%p Monitor forks\n" \ |
| "%[pn] Monitor # of processes\n" \ |
| "%b Monitor block io\n" \ |
| "%Nt Show time (with N decimal points)\n" \ |
| "%Nd Milliseconds between updates (default=1000)\n" \ |
| "%r Print <cr> instead of <lf> at EOL" |
| #define nmeter_example_usage \ |
| "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" |
| |
| #define nohup_trivial_usage \ |
| "COMMAND [ARGS]" |
| #define nohup_full_usage \ |
| "Run a command immune to hangups, with output to a non-tty" |
| #define nohup_example_usage \ |
| "$ nohup make &" |
| |
| #define nslookup_trivial_usage \ |
| "[HOST] [SERVER]" |
| #define nslookup_full_usage \ |
| "Query the nameserver for the IP address of the given HOST\n" \ |
| "optionally using a specified DNS server" |
| #define nslookup_example_usage \ |
| "$ nslookup localhost\n" \ |
| "Server: default\n" \ |
| "Address: default\n" \ |
| "\n" \ |
| "Name: debian\n" \ |
| "Address: 127.0.0.1\n" |
| |
| #define od_trivial_usage \ |
| "[-aBbcDdeFfHhIiLlOovXx] [FILE]" |
| #define od_full_usage \ |
| "Write an unambiguous representation, octal bytes by default, of FILE\n" \ |
| "to standard output. With no FILE, or when FILE is -, read standard input." |
| |
| #define openvt_trivial_usage \ |
| "VTNUM COMMAND [ARGS...]" |
| #define openvt_full_usage \ |
| "Start a command on a new virtual terminal" |
| #define openvt_example_usage \ |
| "openvt 2 /bin/ash\n" |
| |
| #define passwd_trivial_usage \ |
| "[OPTION] [name]" |
| #define passwd_full_usage \ |
| "Change a user password. If no name is specified,\n" \ |
| "changes the password for the current user." \ |
| "\n\nOptions:\n" \ |
| " -a Define which algorithm shall be used for the password\n" \ |
| " (choices: des, md5)\n" /* ", sha1)" */ \ |
| " -d Delete the password for the specified user account\n" \ |
| " -l Locks (disables) the specified user account\n" \ |
| " -u Unlocks (re-enables) the specified user account" |
| |
| #define chpasswd_trivial_usage \ |
| USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]") |
| #define chpasswd_full_usage \ |
| "Read user:password information from stdin\n" \ |
| "and update /etc/passwd accordingly." \ |
| "\n\nOptions:" \ |
| USE_GETOPT_LONG( \ |
| "\n -e,--encrypt Supplied passwords are in encrypted form" \ |
| "\n -m,--md5 Use MD5 encryption instead of DES" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -e Supplied passwords are in encrypted form" \ |
| "\n -m Use MD5 encryption instead of DES" \ |
| ) |
| |
| #define patch_trivial_usage \ |
| "[-p num] [-i diff]" |
| #define patch_full_usage \ |
| " -p NUM Strip NUM leading components from file names\n" \ |
| " -i DIFF Read DIFF instead of stdin" |
| #define patch_example_usage \ |
| "$ patch -p1 < example.diff\n" \ |
| "$ patch -p0 -i example.diff" |
| |
| #define pgrep_trivial_usage \ |
| "[-flnovx] pattern" |
| #define pgrep_full_usage \ |
| "Display process(es) selected by regex pattern" \ |
| "\n\nOptions:\n" \ |
| " -l Show command name too\n" \ |
| " -f Match against entire command line\n" \ |
| " -n Signal the newest process only\n" \ |
| " -o Signal the oldest process only\n" \ |
| " -v Negate the matching\n" \ |
| " -x Match whole name (not substring)" |
| |
| #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) |
| #define USAGE_PIDOF "Options:" |
| #else |
| #define USAGE_PIDOF "\nThis version of pidof accepts no options." |
| #endif |
| |
| #define pidof_trivial_usage \ |
| "process-name [OPTION] [process-name...]" |
| |
| #define pidof_full_usage \ |
| "List the PIDs of all processes with names that match the\n" \ |
| "names on the command line\n" \ |
| USAGE_PIDOF \ |
| USE_FEATURE_PIDOF_SINGLE( \ |
| "\n -s Display only a single PID") \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "\n -o PID Omit given pid") \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "\n Use %PPID to omit the parent pid of pidof itself") |
| #define pidof_example_usage \ |
| "$ pidof init\n" \ |
| "1\n" \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "$ pidof /bin/sh\n20351 5973 5950\n") \ |
| USE_FEATURE_PIDOF_OMIT( \ |
| "$ pidof /bin/sh -o %PPID\n20351 5950") |
| |
| #if !ENABLE_FEATURE_FANCY_PING |
| #define ping_trivial_usage \ |
| "host" |
| #define ping_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" |
| #define ping6_trivial_usage \ |
| "host" |
| #define ping6_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping_trivial_usage \ |
| "[OPTION]... host" |
| #define ping_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" \ |
| "\n\nOptions:\n" \ |
| " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \ |
| " -c CNT Send only CNT pings\n" \ |
| " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ |
| " -I iface/IP Use interface or IP address as source\n" \ |
| " -q Quiet, only displays output at start\n" \ |
| " and when finished" |
| #define ping6_trivial_usage \ |
| "[OPTION]... host" |
| #define ping6_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts" \ |
| "\n\nOptions:\n" \ |
| " -c CNT Send only CNT pings\n" \ |
| " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ |
| " -I iface/IP Use interface or IP address as source\n" \ |
| " -q Quiet, only displays output at start\n" \ |
| " and when finished" |
| #endif |
| #define ping_example_usage \ |
| "$ ping localhost\n" \ |
| "PING slag (127.0.0.1): 56 data bytes\n" \ |
| "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ |
| "\n" \ |
| "--- debian ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| #define ping6_example_usage \ |
| "$ ping6 ip6-localhost\n" \ |
| "PING ip6-localhost (::1): 56 data bytes\n" \ |
| "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ |
| "\n" \ |
| "--- ip6-localhost ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #define pivot_root_trivial_usage \ |
| "NEW_ROOT PUT_OLD" |
| #define pivot_root_full_usage \ |
| "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ |
| "the new root file system" |
| |
| #define pkill_trivial_usage \ |
| "[-l] | [-fnovx] [-signal] pattern" |
| #define pkill_full_usage \ |
| "Send a signal to process(es) selected by regex pattern" \ |
| "\n\nOptions:\n" \ |
| " -l List all signals\n" \ |
| " -f Match against entire command line\n" \ |
| " -n Signal the newest process only\n" \ |
| " -o Signal the oldest process only\n" \ |
| " -v Negate the matching\n" \ |
| " -x Match whole name (not substring)" |
| |
| #define poweroff_trivial_usage \ |
| "[-d delay] [-n] [-f]" |
| #define poweroff_full_usage \ |
| "Halt and shut off power" \ |
| "\n\nOptions:\n" \ |
| " -d Delay interval for halting\n" \ |
| " -n No call to sync()\n" \ |
| " -f Force power off (don't go through init)" |
| |
| #define printenv_trivial_usage \ |
| "[VARIABLES...]" |
| #define printenv_full_usage \ |
| "Print all or part of environment.\n" \ |
| "If no environment VARIABLE specified, print them all." |
| |
| #define printf_trivial_usage \ |
| "FORMAT [ARGUMENT...]" |
| #define printf_full_usage \ |
| "Format and print ARGUMENT(s) according to FORMAT,\n" \ |
| "where FORMAT controls the output exactly as in C printf" |
| #define printf_example_usage \ |
| "$ printf \"Val=%d\\n\" 5\n" \ |
| "Val=5\n" |
| |
| |
| #if ENABLE_DESKTOP |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage \ |
| "Report process status" \ |
| "\n\nOptions:" \ |
| "\n -o col1,col2=header Select columns for display" \ |
| |
| #else /* !ENABLE_DESKTOP */ |
| |
| #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE |
| #define USAGE_PS "\nThis version of ps accepts no options" |
| #else |
| #define USAGE_PS "\nOptions:" |
| #endif |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage \ |
| "Report process status\n" \ |
| USAGE_PS \ |
| USE_SELINUX( \ |
| "\n -Z Show SE Linux context") \ |
| USE_FEATURE_PS_WIDE( \ |
| "\n w Wide output") |
| |
| #endif /* ENABLE_DESKTOP */ |
| |
| #define ps_example_usage \ |
| "$ ps\n" \ |
| " PID Uid Gid State Command\n" \ |
| " 1 root root S init\n" \ |
| " 2 root root S [kflushd]\n" \ |
| " 3 root root S [kupdate]\n" \ |
| " 4 root root S [kpiod]\n" \ |
| " 5 root root S [kswapd]\n" \ |
| " 742 andersen andersen S [bash]\n" \ |
| " 743 andersen andersen S -bash\n" \ |
| " 745 root root S [getty]\n" \ |
| " 2990 andersen andersen R ps\n" |
| |
| #define pscan_trivial_usage \ |
| "[-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" |
| #define pscan_full_usage \ |
| "Scan a host, print all open ports" \ |
| "\n\nOptions:" \ |
| "\n -p Scan from this port (default 1)" \ |
| "\n -P Scan up to this port (default 1024)" \ |
| "\n -t Timeout (default 5000 ms)" \ |
| "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \ |
| |
| #define pwd_trivial_usage \ |
| "" |
| #define pwd_full_usage \ |
| "Print the full filename of the current working directory" |
| #define pwd_example_usage \ |
| "$ pwd\n" \ |
| "/root\n" |
| |
| #define raidautorun_trivial_usage \ |
| "DEVICE" |
| #define raidautorun_full_usage \ |
| "Tell the kernel to automatically search and start RAID arrays" |
| #define raidautorun_example_usage \ |
| "$ raidautorun /dev/md0" |
| |
| #define rdate_trivial_usage \ |
| "[-sp] HOST" |
| #define rdate_full_usage \ |
| "Get and possibly set the system date and time from a remote HOST" \ |
| "\n\nOptions:\n" \ |
| " -s Set the system date and time (default)\n" \ |
| " -p Print the date and time" |
| |
| #define readahead_trivial_usage \ |
| "[FILE]..." |
| #define readahead_full_usage \ |
| "Preload FILE(s) in RAM cache so that subsequent reads for those" \ |
| "files do not block on disk I/O" |
| |
| #define readlink_trivial_usage \ |
| USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" |
| #define readlink_full_usage \ |
| "Display the value of a symlink" \ |
| USE_FEATURE_READLINK_FOLLOW( \ |
| "\n\nOptions:\n" \ |
| " -f Canonicalize by following all symlinks") |
| |
| #define readprofile_trivial_usage \ |
| "[OPTIONS]..." |
| #define readprofile_full_usage \ |
| "Options:\n" \ |
| " -m mapfile (Default: /boot/System.map)\n" \ |
| " -p profile (Default: /proc/profile)\n" \ |
| " -M mult Set the profiling multiplier to mult\n" \ |
| " -i Print only info about the sampling step\n" \ |
| " -v Verbose\n" \ |
| " -a Print all symbols, even if count is 0\n" \ |
| " -b Print individual histogram-bin counts\n" \ |
| " -s Print individual counters within functions\n" \ |
| " -r Reset all the counters (root only)\n" \ |
| " -n Disable byte order auto-detection" |
| |
| #define realpath_trivial_usage \ |
| "pathname..." |
| #define realpath_full_usage \ |
| "Return the absolute pathnames of given argument" |
| |
| #define reboot_trivial_usage \ |
| "[-d delay] [-n] [-f]" |
| #define reboot_full_usage \ |
| "Reboot the system" \ |
| "\n\nOptions:\n" \ |
| " -d Delay interval for rebooting\n" \ |
| " -n No call to sync()\n" \ |
| " -f Force reboot (don't go through init)" |
| |
| #define renice_trivial_usage \ |
| "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" |
| #define renice_full_usage \ |
| "Change priority of running processes" \ |
| "\n\nOptions:\n" \ |
| " -n Adjust current nice value (smaller is faster)\n" \ |
| " -p Process id(s) (default)\n" \ |
| " -g Process group id(s)\n" \ |
| " -u Process user name(s) and/or id(s)" |
| |
| #define reset_trivial_usage \ |
| "" |
| #define reset_full_usage \ |
| "Reset the screen" |
| |
| #define resize_trivial_usage \ |
| "" |
| #define resize_full_usage \ |
| "Resize the screen" |
| |
| #define restorecon_trivial_usage \ |
| "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]" |
| #define restorecon_full_usage \ |
| "Reset security contexts of files in pathname\n" \ |
| "\n -i Ignore files that do not exist" \ |
| "\n -f file File with list of files to process. Use - for stdin" \ |
| "\n -e directory Directory to exclude" \ |
| "\n -R,-r Recurse directories" \ |
| "\n -n Don't change any file labels" \ |
| "\n -o file Save list of files with incorrect context" \ |
| "\n -v Verbose" \ |
| "\n -vv Show changed labels" \ |
| "\n -F Force reset of context to match file_context" \ |
| "\n for customizable files, or the user section," \ |
| "\n if it has changed" |
| |
| #define rm_trivial_usage \ |
| "[OPTION]... FILE..." |
| #define rm_full_usage \ |
| "Remove (unlink) the FILE(s). You may use '--' to\n" \ |
| "indicate that all following arguments are non-options." \ |
| "\n\nOptions:\n" \ |
| " -i Always prompt before removing each destination\n" \ |
| " -f Remove existing destinations, never prompt\n" \ |
| " -r,-R Remove the contents of directories recursively" |
| #define rm_example_usage \ |
| "$ rm -rf /tmp/foo\n" |
| |
| #define rmdir_trivial_usage \ |
| "[OPTION]... DIRECTORY..." |
| #define rmdir_full_usage \ |
| "Remove the DIRECTORY, if it is empty" |
| #define rmdir_example_usage \ |
| "# rmdir /tmp/foo\n" |
| |
| #define rmmod_trivial_usage \ |
| "[OPTION]... [MODULE]..." |
| #define rmmod_full_usage \ |
| "Unload the specified kernel modules from the kernel" \ |
| "\n\nOptions:\n" \ |
| " -a Remove all unused modules (recursively)" |
| #define rmmod_example_usage \ |
| "$ rmmod tulip\n" |
| |
| #define route_trivial_usage \ |
| "[{add|del|delete}]" |
| #define route_full_usage \ |
| "Edit the kernel's routing tables" \ |
| "\n\nOptions:\n" \ |
| " -n Dont resolve names\n" \ |
| " -e Display other/more information\n" \ |
| " -A inet" USE_FEATURE_IPV6("{6}") " Select address family" |
| |
| #define rpm_trivial_usage \ |
| "-i -q[ildc]p package.rpm" |
| #define rpm_full_usage \ |
| "Manipulate RPM packages" \ |
| "\n\nOptions:" \ |
| "\n -i Install package" \ |
| "\n -q Query package" \ |
| "\n -p Query uninstalled package" \ |
| "\n -i Show information" \ |
| "\n -l List contents" \ |
| "\n -d List documents" \ |
| "\n -c List config files" |
| |
| #define rpm2cpio_trivial_usage \ |
| "package.rpm" |
| #define rpm2cpio_full_usage \ |
| "Output a cpio archive of the rpm file" |
| |
| #define runcon_trivial_usage \ |
| "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ |
| " runcon CONTEXT COMMAND [args]" |
| #define runcon_full_usage \ |
| "Run a program in a different security context\n\n" \ |
| " CONTEXT Complete security context\n" \ |
| USE_GETOPT_LONG( \ |
| " -c,--compute Compute process transition context before modifying\n" \ |
| " -t,--type=TYPE Type (for same role as parent)\n" \ |
| " -u,--user=USER User identity\n" \ |
| " -r,--role=ROLE Role\n" \ |
| " -l,--range=RNG Levelrange" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -c Compute process transition context before modifying\n" \ |
| " -t TYPE Type (for same role as parent)\n" \ |
| " -u USER User identity\n" \ |
| " -r ROLE Role\n" \ |
| " -l RNG Levelrange" \ |
| ) |
| |
| #define run_parts_trivial_usage \ |
| "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY" |
| #define run_parts_full_usage \ |
| "Run a bunch of scripts in a directory" \ |
| "\n\nOptions:\n" \ |
| " -t Prints what would be run, but does not actually run anything\n" \ |
| " -a ARG Pass ARG as an argument for every program invoked\n" \ |
| " -u MASK Set the umask to MASK before executing every program" \ |
| USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when they are not executable") |
| |
| #define run_parts_example_usage \ |
| "$ run-parts -a start /etc/init.d\n" \ |
| "$ run-parts -a stop=now /etc/init.d\n\n" \ |
| "Let's assume you have a script foo/dosomething:\n" \ |
| "#!/bin/sh\n" \ |
| "for i in $*; do eval $i; done; unset i\n" \ |
| "case \"$1\" in\n" \ |
| "start*) echo starting something;;\n" \ |
| "stop*) set -x; shutdown -h $stop;;\n" \ |
| "esac\n\n" \ |
| "Running this yields:\n" \ |
| "$run-parts -a stop=+4m foo/\n" \ |
| "+ shutdown -h +4m" |
| |
| #define runlevel_trivial_usage \ |
| "[utmp]" |
| #define runlevel_full_usage \ |
| "Find the current and previous system runlevel.\n\n" \ |
| "If no utmp file exists or if no runlevel record can be found,\n" \ |
| "print \"unknown\"" |
| #define runlevel_example_usage \ |
| "$ runlevel /var/run/utmp\n" \ |
| "N 2" |
| |
| #define runsv_trivial_usage \ |
| "dir" |
| #define runsv_full_usage \ |
| "Start and monitor a service and optionally an appendant log service" |
| |
| #define runsvdir_trivial_usage \ |
| "[-P] dir" |
| #define runsvdir_full_usage \ |
| "Start a runsv process for each subdirectory" |
| |
| #define rx_trivial_usage \ |
| "FILE" |
| #define rx_full_usage \ |
| "Receive a file using the xmodem protocol" |
| #define rx_example_usage \ |
| "$ rx /tmp/foo\n" |
| |
| #define sed_trivial_usage \ |
| "[-efinr] pattern [files...]" |
| #define sed_full_usage \ |
| "Options:\n" \ |
| " -e script Add the script to the commands to be executed\n" \ |
| " -f scriptfile Add script-file contents to the\n" \ |
| " commands to be executed\n" \ |
| " -i Edit files in-place\n" \ |
| " -n Suppress automatic printing of pattern space\n" \ |
| " -r Use extended regular expression syntax\n" \ |
| "\n" \ |
| "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ |
| "script to interpret. All remaining arguments are names of input files; if no\n" \ |
| "input files are specified, then the standard input is read. Source files\n" \ |
| "will not be modified unless -i option is given." |
| |
| #define sed_example_usage \ |
| "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ |
| "bar\n" |
| |
| #define selinuxenabled_trivial_usage |
| #define selinuxenabled_full_usage |
| |
| #define seq_trivial_usage \ |
| "[first [increment]] last" |
| #define seq_full_usage \ |
| "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ |
| "FIRST, INCREMENT default to 1" \ |
| "\n\nArguments:\n" \ |
| " LAST\n" \ |
| " FIRST LAST\n" \ |
| " FIRST INCREMENT LAST" |
| |
| #define sestatus_trivial_usage \ |
| "[-vb]" |
| #define sestatus_full_usage \ |
| "-v Verbose\n" \ |
| "-b Display current state of booleans" |
| |
| #define setconsole_trivial_usage \ |
| "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]" |
| #define setconsole_full_usage \ |
| "Redirect system console output to DEVICE (default: /dev/tty)" \ |
| "\n\nOptions:\n" \ |
| " -r Reset output to /dev/console" |
| |
| #define setenforce_trivial_usage \ |
| "[Enforcing | Permissive | 1 | 0]" |
| #define setenforce_full_usage |
| |
| #define setfiles_trivial_usage \ |
| "[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \ |
| USE_FEATURE_SETFILES_CHECK_OPTION( \ |
| " [-c policyfile] spec_file" \ |
| ) \ |
| " pathname" |
| |
| #define setfiles_full_usage \ |
| "Reset file contexts under pathname according to spec_file" \ |
| USE_FEATURE_SETFILES_CHECK_OPTION( \ |
| "\n -c file Check the validity of the contexts against the specified binary policy" \ |
| ) \ |
| "\n -d Show which specification matched each file" \ |
| "\n -l Log changes in file labels to syslog" \ |
| "\n -n Don't change any file labels" \ |
| "\n -q Suppress warnings" \ |
| "\n -r dir Use an altenate root path" \ |
| "\n -e dir Exclude directory" \ |
| "\n -F Force reset of context to match file_context for customizable files" \ |
| "\n -o file Save list of files with incorrect context" \ |
| "\n -s Take a list of files from standard input (instead of command line)" \ |
| "\n -v Show changes in file labels, if type or role are changing" \ |
| "\n -vv Show changes in file labels, if type, role, or user are changing" \ |
| "\n -W Display warnings about entries that had no matching files" |
| |
| #define setkeycodes_trivial_usage \ |
| "SCANCODE KEYCODE..." |
| #define setkeycodes_full_usage \ |
| "Set entries into the kernel's scancode-to-keycode map,\n" \ |
| "allowing unusual keyboards to generate usable keycodes.\n\n" \ |
| "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ |
| "and KEYCODE is given in decimal" |
| #define setkeycodes_example_usage \ |
| "$ setkeycodes e030 127\n" |
| |
| #define setlogcons_trivial_usage \ |
| "N" |
| #define setlogcons_full_usage \ |
| "Redirect the kernel output to console N (0 for current)" |
| |
| #define setsebool_trivial_usage \ |
| "boolean value" |
| |
| #define setsebool_full_usage \ |
| "Change boolean setting" |
| |
| #define setsid_trivial_usage \ |
| "program [arg...]" |
| #define setsid_full_usage \ |
| "Run any program in a new session by calling setsid() before\n" \ |
| "exec'ing the rest of its arguments. See setsid(2) for details." |
| |
| #define lash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: sh -c command [args]..." |
| #define lash_full_usage \ |
| "lash is deprecated, please use hush" |
| |
| #define last_trivial_usage \ |
| "" |
| #define last_full_usage \ |
| "Show listing of the last users that logged into the system" |
| |
| #define sha1sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") |
| #define sha1sum_full_usage \ |
| "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \ |
| "With no FILE, or when FILE is -, read standard input." \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_MD5_SHA1_SUM_CHECK( \ |
| " -c Check SHA1 sums against given list\n" \ |
| "\nThe following two options are useful only when verifying checksums:\n" \ |
| " -s Don't output anything, status code shows success\n" \ |
| " -w Warn about improperly formatted SHA1 checksum lines") |
| |
| #define slattach_trivial_usage \ |
| "[-cehmLF] [-s speed] [-p protocol] DEVICEs" |
| #define slattach_full_usage \ |
| "Attach network interface(s) to serial line(s)\n" \ |
| "\nOptions:" \ |
| "\n -p Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \ |
| "\n -s Set line speed" \ |
| "\n -e Exit after initializing device" \ |
| "\n -h Exit when the carrier is lost" \ |
| "\n -c Execute a command when the line is hung up" \ |
| "\n -m Do NOT initialize the line in raw 8 bits mode" \ |
| "\n -L Enable 3-wire operation" \ |
| "\n -F Disable RTS/CTS flow control" \ |
| |
| #define sleep_trivial_usage \ |
| USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...") |
| #define sleep_full_usage \ |
| SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \ |
| USE_FEATURE_FANCY_SLEEP( \ |
| "Pause for a time equal to the total of the args given, where each arg can\n" \ |
| "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") |
| #define sleep_example_usage \ |
| "$ sleep 2\n" \ |
| "[2 second delay results]\n" \ |
| USE_FEATURE_FANCY_SLEEP( \ |
| "$ sleep 1d 3h 22m 8s\n" \ |
| "[98528 second delay results]\n") |
| |
| #define sort_trivial_usage \ |
| "[-nru" \ |
| USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \ |
| "] [FILE]..." |
| #define sort_full_usage \ |
| "Sort lines of text in the specified files" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_SORT_BIG( \ |
| " -b Ignore leading blanks\n" \ |
| " -c Check whether input is sorted\n" \ |
| " -d Dictionary order (blank or alphanumeric only)\n" \ |
| " -f Ignore case\n" \ |
| " -g General numerical sort\n" \ |
| " -i Ignore unprintable characters\n" \ |
| " -k Sort key\n" \ |
| " -M Sort month\n") \ |
| " -n Sort numbers\n" \ |
| USE_FEATURE_SORT_BIG( \ |
| " -o Output to file\n" \ |
| " -k Sort by key\n" \ |
| " -t Use key separator other than whitespace\n") \ |
| " -r Reverse sort order\n" \ |
| USE_FEATURE_SORT_BIG( \ |
| " -s Stable (don't sort ties alphabetically)\n") \ |
| " -u Suppress duplicate lines" \ |
| USE_FEATURE_SORT_BIG( \ |
| "\n -z Input terminated by nulls, not newlines\n") \ |
| USE_FEATURE_SORT_BIG( \ |
| " -mST Ignored for GNU compatibility") \ |
| "" |
| #define sort_example_usage \ |
| "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" \ |
| "d\n" \ |
| "e\n" \ |
| "f\n" \ |
| USE_FEATURE_SORT_BIG( \ |
| "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ |
| "d 2\n" \ |
| "b 2\n" \ |
| "c 3\n" \ |
| ) \ |
| "" |
| |
| #define split_trivial_usage \ |
| "[OPTION] [INPUT [PREFIX]]" |
| #define split_full_usage \ |
| "Options:" \ |
| "\n -b n[k|m] Split by bytes" \ |
| "\n -l n Split by lines" \ |
| "\n -a n Use n letters as suffix" |
| #define split_example_usage \ |
| "$ split TODO foo\n" \ |
| "$ cat TODO | split -a 2 -l 2 TODO_\n" |
| |
| #define start_stop_daemon_trivial_usage \ |
| "[OPTIONS] [" \ |
| USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \ |
| "] ... [-- arguments...]" |
| #define start_stop_daemon_full_usage \ |
| "Start and stop services" \ |
| "\n\nOptions:" \ |
| USE_GETOPT_LONG( \ |
| "\n -S,--start Start" \ |
| "\n -K,--stop Stop" \ |
| "\n -a,--startas pathname Starts process specified by pathname" \ |
| "\n -b,--background Put process into background" \ |
| "\n -u,--user username|uid Stop this user's processes" \ |
| "\n -x,--exec executable Program to either start or check" \ |
| "\n -n,--name process-name Stop processes with this name" \ |
| "\n -p,--pidfile pid-file Save or load pid using a pid-file" \ |
| "\n -m,--make-pidfile Create the -p file and enter pid in it" \ |
| "\n -q,--quiet Quiet" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -o,--oknodo Exit status 0 if nothing done" \ |
| "\n -v,--verbose Verbose" \ |
| "\n -N,--nicelevel N Add N to process's nice level" \ |
| ) \ |
| "\n -s,--signal signal Signal to send (default TERM)" \ |
| "\n -c,--chuid user[:[grp]] Change to specified user/group" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "\n -S Start" \ |
| "\n -K Stop" \ |
| "\n -a pathname Starts process specified by pathname" \ |
| "\n -b Put process into background" \ |
| "\n -u username|uid Stop this user's processes" \ |
| "\n -x executable Program to either start or check" \ |
| "\n -n process-name Stop processes with this name" \ |
| "\n -p pid-file Save or load pid using a pid-file" \ |
| "\n -m Create the -p file and enter pid in it" \ |
| "\n -q Quiet" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n -o Exit status 0 if nothing done" \ |
| "\n -v Verbose" \ |
| "\n -N N Add N to process's nice level" \ |
| ) \ |
| "\n -s signal Signal to send (default TERM)" \ |
| "\n -c user[:[grp]] Change to specified user/group" \ |
| ) |
| |
| #define stat_trivial_usage \ |
| "[OPTION] FILE..." |
| #define stat_full_usage \ |
| "Display file (default) or filesystem status" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_STAT_FORMAT( \ |
| " -c fmt Use the specified format\n") \ |
| " -f Display filesystem status\n" \ |
| " -L,-l Dereference links\n" \ |
| " -t Display info in terse form" \ |
| USE_SELINUX( \ |
| "\n -Z Print security context" \ |
| ) \ |
| USE_FEATURE_STAT_FORMAT( \ |
| "\n\nValid format sequences for files:\n" \ |
| " %a Access rights in octal\n" \ |
| " %A Access rights in human readable form\n" \ |
| " %b Number of blocks allocated (see %B)\n" \ |
| " %B The size in bytes of each block reported by %b\n" \ |
| " %d Device number in decimal\n" \ |
| " %D Device number in hex\n" \ |
| " %f Raw mode in hex\n" \ |
| " %F File type\n" \ |
| " %g Group ID of owner\n" \ |
| " %G Group name of owner\n" \ |
| " %h Number of hard links\n" \ |
| " %i Inode number\n" \ |
| " %n File name\n" \ |
| " %N Quoted file name with dereference if symlink\n" \ |
| " %o I/O block size\n" \ |
| " %s Total size, in bytes\n" \ |
| " %t Major device type in hex\n" \ |
| " %T Minor device type in hex\n" \ |
| " %u User ID of owner\n" \ |
| " %U User name of owner\n" \ |
| " %x Time of last access\n" \ |
| " %X Time of last access as seconds since Epoch\n" \ |
| " %y Time of last modification\n" \ |
| " %Y Time of last modification as seconds since Epoch\n" \ |
| " %z Time of last change\n" \ |
| " %Z Time of last change as seconds since Epoch\n" \ |
| "\nValid format sequences for file systems:\n" \ |
| " %a Free blocks available to non-superuser\n" \ |
| " %b Total data blocks in file system\n" \ |
| " %c Total file nodes in file system\n" \ |
| " %d Free file nodes in file system\n" \ |
| " %f Free blocks in file system\n" \ |
| USE_SELINUX( \ |
| " %C Security context in SELinux\n" \ |
| ) \ |
| " %i File System ID in hex\n" \ |
| " %l Maximum length of filenames\n" \ |
| " %n File name\n" \ |
| " %s Block size (for faster transfer)\n" \ |
| " %S Fundamental block size (for block counts)\n" \ |
| " %t Type in hex\n" \ |
| " %T Type in human readable form" \ |
| ) |
| |
| #define strings_trivial_usage \ |
| "[-afo] [-n length] [file...]" |
| #define strings_full_usage \ |
| "Display printable strings in a binary file" \ |
| "\n\nOptions:" \ |
| "\n -a Scan whole file (default)" \ |
| "\n -f Precede strings with filenames" \ |
| "\n -n N At least N characters form a string (default 4)" \ |
| "\n -o Precede strings with decimal offsets" |
| |
| #define stty_trivial_usage \ |
| "[-a|g] [-F DEVICE] [SETTING]..." |
| #define stty_full_usage \ |
| "Without arguments, prints baud rate, line discipline,\n" \ |
| "and deviations from stty sane" \ |
| "\n\nOptions:" \ |
| "\n -F DEVICE Open device instead of stdin" \ |
| "\n -a Print all current settings in human-readable form" \ |
| "\n -g Print in stty-readable form" \ |
| "\n [SETTING] See manpage" |
| |
| #define su_trivial_usage \ |
| "[OPTION]... [-] [username]" |
| #define su_full_usage \ |
| "Change user id or become root" \ |
| "\n\nOptions:" \ |
| "\n -p, -m Preserve environment" \ |
| "\n -c Command to pass to 'sh -c'" \ |
| "\n -s Shell to use instead of default shell" |
| |
| #define sulogin_trivial_usage \ |
| "[OPTION]... [tty-device]" |
| #define sulogin_full_usage \ |
| "Single user login" \ |
| "\n\nOptions:" \ |
| "\n -t Timeout" |
| |
| #define sum_trivial_usage \ |
| "[rs] [files...]" |
| #define sum_full_usage \ |
| "Checksum and count the blocks in a file" \ |
| "\n\nOptions:\n" \ |
| " -r Use BSD sum algorithm (1K blocks)\n" \ |
| " -s Use System V sum algorithm (512byte blocks)" |
| |
| #define sv_trivial_usage \ |
| "[-v] [-w sec] command service..." |
| #define sv_full_usage \ |
| "Control services monitored by runsv supervisor.\n" \ |
| "Commands (only first character is enough):\n" \ |
| "\n" \ |
| "status: query service status\n" \ |
| "up: if service isn't running, start it. If service stops, restart it\n" \ |
| "once: like 'up', but if service stops, don't restart it\n" \ |
| "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \ |
| " if it exists. After it stops, do not restart service\n" \ |
| "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ |
| " runsv exits too\n" \ |
| "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ |
| "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" |
| |
| #define svlogd_trivial_usage \ |
| "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." |
| #define svlogd_full_usage \ |
| "Continuously read log data from standard input, optionally " \ |
| "filter log messages, and write the data to one or more automatically " \ |
| "rotated logs" |
| |
| #define swapoff_trivial_usage \ |
| "[-a] [DEVICE]" |
| #define swapoff_full_usage \ |
| "Stop swapping virtual memory pages on DEVICE" \ |
| "\n\nOptions:\n" \ |
| " -a Stop swapping on all swap devices" |
| |
| #define swapon_trivial_usage \ |
| "[-a] [DEVICE]" |
| #define swapon_full_usage \ |
| "Start swapping virtual memory pages on DEVICE" \ |
| "\n\nOptions:\n" \ |
| " -a Start swapping on all swap devices" |
| |
| #define switch_root_trivial_usage \ |
| "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" |
| #define switch_root_full_usage \ |
| "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ |
| "and exec NEW_INIT" \ |
| "\n\nOptions:\n" \ |
| " -c Redirect console to device on new root" |
| |
| #define sync_trivial_usage \ |
| "" |
| #define sync_full_usage \ |
| "Write all buffered filesystem blocks to disk" |
| |
| #define sysctl_trivial_usage \ |
| "[OPTIONS]... [VALUE]..." |
| #define sysctl_full_usage \ |
| "Configure kernel parameters at runtime" \ |
| "\n\nOptions:\n" \ |
| " -n Disable printing of key names\n" \ |
| " -w Change sysctl setting\n" \ |
| " -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)\n" \ |
| " -a Display all values\n" \ |
| " -A Display all values in table form" |
| #define sysctl_example_usage \ |
| "sysctl [-n] variable...\n" \ |
| "sysctl [-n] -w variable=value...\n" \ |
| "sysctl [-n] -a\n" \ |
| "sysctl [-n] -p file (default /etc/sysctl.conf)\n" \ |
| "sysctl [-n] -A\n" |
| |
| #define syslogd_trivial_usage \ |
| "[OPTION]..." |
| #define syslogd_full_usage \ |
| "System logging utility.\n" \ |
| "Note that this version of syslogd ignores /etc/syslog.conf." \ |
| "\n\nOptions:" \ |
| "\n -n Run in foreground" \ |
| "\n -O FILE Log to given file (default=/var/log/messages)" \ |
| "\n -l n Set local log level" \ |
| "\n -S Smaller logging output" \ |
| USE_FEATURE_ROTATE_LOGFILE( \ |
| "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ |
| "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ |
| USE_FEATURE_REMOTE_LOG( \ |
| "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ |
| "\n -L Log locally and via network (default is network only if -R)") \ |
| USE_FEATURE_IPC_SYSLOG( \ |
| "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") |
| /* NB: -Csize shouldn't have space (because size is optional) */ |
| /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */ |
| #define syslogd_example_usage \ |
| "$ syslogd -R masterlog:514\n" \ |
| "$ syslogd -R 192.168.1.1:601\n" |
| |
| #define tail_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tail_full_usage \ |
| "Print last 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input." \ |
| "\n\nOptions:" \ |
| USE_FEATURE_FANCY_TAIL( \ |
| "\n -c N[kbm] Output the last N bytes") \ |
| "\n -n N[kbm] Print last N lines instead of last 10" \ |
| "\n -f Output data as the file grows" \ |
| USE_FEATURE_FANCY_TAIL( \ |
| "\n -q Never output headers giving file names" \ |
| "\n -s SEC Wait SEC seconds between reads with -f" \ |
| "\n -v Always output headers giving file names" \ |
| "\n\n" \ |
| "If the first character of N (bytes or lines) is a '+', output begins with\n" \ |
| "the Nth item from the start of each file, otherwise, print the last N items\n" \ |
| "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) |
| #define tail_example_usage \ |
| "$ tail -n 1 /etc/resolv.conf\n" \ |
| "nameserver 10.0.0.1\n" |
| |
| #define tar_trivial_usage \ |
| "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \ |
| USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \ |
| USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \ |
| USE_FEATURE_TAR_FROM("[-X FILE] ") \ |
| "[-f TARFILE] [-C DIR] [FILE(s)]..." |
| #define tar_full_usage \ |
| "Create, extract, or list files from a tar file" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_TAR_CREATE( \ |
| " c Create\n") \ |
| " x Extract\n" \ |
| " t List\n" \ |
| "\nArchive format selection:\n" \ |
| USE_FEATURE_TAR_GZIP( \ |
| " z Filter the archive through gzip\n") \ |
| USE_FEATURE_TAR_BZIP2( \ |
| " j Filter the archive through bzip2\n") \ |
| USE_FEATURE_TAR_LZMA( \ |
| " a Filter the archive through lzma\n") \ |
| USE_FEATURE_TAR_COMPRESS( \ |
| " Z Filter the archive through compress\n") \ |
| "\nFile selection:\n" \ |
| " f Name of TARFILE or \"-\" for stdin\n" \ |
| " O Extract to stdout\n" \ |
| USE_FEATURE_TAR_FROM( \ |
| " exclude File to exclude\n" \ |
| " X File with names to exclude\n") \ |
| " C Change to directory DIR before operation\n" \ |
| " v Verbose" |
| #define tar_example_usage \ |
| "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ |
| "$ tar -cf /tmp/tarball.tar /usr/local\n" |
| |
| #define taskset_trivial_usage \ |
| "[OPTIONS] [mask] [pid | command [arg]...]" |
| #define taskset_full_usage \ |
| "Set or get CPU affinity" \ |
| "\n\nOptions:\n" \ |
| " -p Operate on an existing PID" |
| #define taskset_example_usage \ |
| "$ taskset 0x7 ./dgemm_test&\n" \ |
| "$ taskset -p 0x1 $!\n" \ |
| "pid 4790's current affinity mask: 7\n" \ |
| "pid 4790's new affinity mask: 1\n" \ |
| "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ |
| "pid 6671's current affinity mask: 1\n" \ |
| "pid 6671's new affinity mask: 1\n" \ |
| "$ taskset -p 1\n" \ |
| "pid 1's current affinity mask: 3\n" |
| |
| #define tee_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tee_full_usage \ |
| "Copy standard input to each FILE, and also to standard output" \ |
| "\n\nOptions:\n" \ |
| " -a Append to the given FILEs, do not overwrite\n" \ |
| " -i Ignore interrupt signals (SIGINT)" |
| #define tee_example_usage \ |
| "$ echo \"Hello\" | tee /tmp/foo\n" \ |
| "$ cat /tmp/foo\n" \ |
| "Hello\n" |
| |
| #if ENABLE_FEATURE_TELNET_AUTOLOGIN |
| #define telnet_trivial_usage \ |
| "[-a] [-l USER] HOST [PORT]" |
| #define telnet_full_usage \ |
| "Connect to remote telnet server" \ |
| "\n\nOptions:\n" \ |
| " -a Attempt an automatic login with the USER variable\n" \ |
| " -l USER Attempt an automatic login with the USER argument\n" \ |
| " HOST The official name, alias or the IP address of the\n" \ |
| " remote host\n" \ |
| " PORT The remote port number to connect to. If it is not\n" \ |
| " specified, the default telnet (23) port is used." |
| #else |
| #define telnet_trivial_usage \ |
| "HOST [PORT]" |
| #define telnet_full_usage \ |
| "Connect to remote telnet server" |
| #endif |
| |
| #define telnetd_trivial_usage \ |
| "[OPTION]" |
| #define telnetd_full_usage \ |
| "Handle incoming telnet connections" \ |
| SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \ |
| "\n\nOptions:" \ |
| "\n -l LOGIN Exec LOGIN on connect" \ |
| "\n -f issue_file Display issue_file instead of /etc/issue" \ |
| "\n -K Close connection as soon as login exits" \ |
| "\n (normally wait until all programs close slave pty)" \ |
| USE_FEATURE_TELNETD_STANDALONE( \ |
| "\n -p PORT Port to listen to" \ |
| "\n -b ADDR Address to bind to" \ |
| "\n -F Run in foreground" \ |
| "\n -i Run as inetd subservice" \ |
| ) |
| |
| #define test_trivial_usage \ |
| "EXPRESSION\n or [ EXPRESSION ]" |
| #define test_full_usage \ |
| "Check file types and compares values returning an exit code\n" \ |
| "determined by the value of EXPRESSION" |
| #define test_example_usage \ |
| "$ test 1 -eq 2\n" \ |
| "$ echo $?\n" \ |
| "1\n" \ |
| "$ test 1 -eq 1\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /etc ]\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /junk ]\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define tcpsvd_trivial_usage \ |
| "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..." |
| /* with not-implemented options: */ |
| /* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */ |
| #define tcpsvd_full_usage \ |
| "Creates TCP socket, binds it to ip:port and listens on it\n" \ |
| "for incoming connections. For each connection it runs prog." \ |
| "\n" \ |
| "\nip IP to listen on. '0' = all" \ |
| "\nport Port to listen on" \ |
| "\nprog [arg] Program to run" \ |
| "\n-l name Local hostname (else looks up local hostname in DNS)" \ |
| "\n-u user[:group] Change to user/group after bind" \ |
| "\n-c n Handle up to n connections simultaneously" \ |
| "\n-b n Allow a backlog of approximately n TCP SYNs" \ |
| "\n-C n[:msg] Allow only up to n connections from the same IP" \ |
| "\n New connections from this IP address are closed" \ |
| "\n immediately. 'msg' is written to the peer before close" \ |
| "\n-h Look up peer's hostname" \ |
| "\n-E Do not set up environment variables" \ |
| "\n-v Verbose" |
| |
| #define udpsvd_trivial_usage \ |
| "[-hEv] [-c n] [-u user] [-l name] ip port prog" |
| #define udpsvd_full_usage \ |
| "Creates UDP socket, binds it to ip:port and listens on it\n" \ |
| "for incoming packets. For each packet it runs prog\n" \ |
| "(redirecting all further packets with same peer ip:port to it)." \ |
| "\n" \ |
| "\nip IP to listen on. '0' = all" \ |
| "\nport Port to listen on" \ |
| "\nprog [arg] Program to run" \ |
| "\n-l name Local hostname (else looks up local hostname in DNS)" \ |
| "\n-u user[:group] Change to user/group after bind" \ |
| "\n-c n Handle up to n connections simultaneously" \ |
| "\n-h Look up peer's hostname" \ |
| "\n-E Do not set up environment variables" \ |
| "\n-v Verbose" |
| |
| #define tftp_trivial_usage \ |
| "[OPTION]... HOST [PORT]" |
| #define tftp_full_usage \ |
| "Transfer a file from/to tftp server using \"octet\" mode" \ |
| "\n\nOptions:" \ |
| "\n -l FILE Local FILE" \ |
| "\n -r FILE Remote FILE" \ |
| USE_FEATURE_TFTP_GET( \ |
| "\n -g Get file" \ |
| ) \ |
| USE_FEATURE_TFTP_PUT( \ |
| "\n -p Put file" \ |
| ) \ |
| USE_FEATURE_TFTP_BLOCKSIZE( \ |
| "\n -b SIZE Transfer blocks of SIZE octets" \ |
| ) |
| #define time_trivial_usage \ |
| "[OPTION]... COMMAND [ARGS...]" |
| #define time_full_usage \ |
| "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ |
| "COMMAND's resource usage information is displayed." \ |
| "\n\nOptions:\n" \ |
| " -v Verbose" |
| |
| #define top_trivial_usage \ |
| "[-b] [-n count] [-d seconds]" |
| #define top_full_usage \ |
| "Provide a view of process activity in real time.\n" \ |
| "Read the status of all processes from /proc each <seconds>\n" \ |
| "and show the status for however many processes will fit on the screen." |
| |
| #define touch_trivial_usage \ |
| "[-c] FILE [FILE...]" |
| #define touch_full_usage \ |
| "Update the last-modified date on the given FILE[s]" \ |
| "\n\nOptions:\n" \ |
| " -c Do not create any files" |
| #define touch_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "/bin/ls: /tmp/foo: No such file or directory\n" \ |
| "$ touch /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" |
| |
| #define tr_trivial_usage \ |
| "[-cds] STRING1 [STRING2]" |
| #define tr_full_usage \ |
| "Translate, squeeze, and/or delete characters from\n" \ |
| "standard input, writing to standard output" \ |
| "\n\nOptions:\n" \ |
| " -c Take complement of STRING1\n" \ |
| " -d Delete input characters coded STRING1\n" \ |
| " -s Squeeze multiple output characters of STRING2 into one character" |
| #define tr_example_usage \ |
| "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ |
| "hello world\n" |
| |
| #define traceroute_trivial_usage \ |
| "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ |
| " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ |
| " [-z pausemsecs] host [data size]" |
| #define traceroute_full_usage \ |
| "Trace the route to \"host\"" \ |
| "\n\nOptions:\n" \ |
| " -F Set the don't fragment bit\n" \ |
| " -I Use ICMP ECHO instead of UDP datagrams\n" \ |
| " -l Display the ttl value of the returned packet\n" \ |
| " -d Set SO_DEBUG options to socket\n" \ |
| " -n Print hop addresses numerically rather than symbolically\n" \ |
| " -r Bypass the normal routing tables and send directly to a host\n" \ |
| " -v Verbose\n" \ |
| " -m max_ttl Max time-to-live (max number of hops)\n" \ |
| " -p port# Base UDP port number used in probes\n" \ |
| " (default is 33434)\n" \ |
| " -q nqueries Number of probes per 'ttl' (default 3)\n" \ |
| " -s src_addr IP address to use as the source address\n" \ |
| " -t tos Type-of-service in probe packets (default 0)\n" \ |
| " -w wait Time in seconds to wait for a response\n" \ |
| " (default 3 sec)\n" \ |
| " -g Loose source route gateway (8 max)" |
| |
| #define true_trivial_usage \ |
| "" |
| #define true_full_usage \ |
| "Return an exit code of TRUE (0)" |
| #define true_example_usage \ |
| "$ true\n" \ |
| "$ echo $?\n" \ |
| "0\n" |
| |
| #define tty_trivial_usage \ |
| "" |
| #define tty_full_usage \ |
| "Print file name of standard input's terminal" \ |
| USE_INCLUDE_SUSv2( \ |
| "\n\nOptions:\n" \ |
| " -s Print nothing, only return exit status") |
| #define tty_example_usage \ |
| "$ tty\n" \ |
| "/dev/tty2\n" |
| |
| #define ttysize_trivial_usage \ |
| "[w] [h]" |
| #define ttysize_full_usage \ |
| "Print dimension(s) of standard input's terminal, on error return 80x25" |
| |
| #define tune2fs_trivial_usage \ |
| "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ |
| "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ |
| "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ |
| "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ |
| "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ |
| "[-T last-check-time] [-U UUID] device" |
| #define tune2fs_full_usage \ |
| "Adjust filesystem options on ext[23] filesystems" |
| |
| #define udhcpc_trivial_usage \ |
| "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \ |
| " [-p pidfile] [-r IP] [-s script]" |
| #define udhcpc_full_usage \ |
| USE_GETOPT_LONG( \ |
| " -V,--vendorclass=CLASSID Vendor class identifier" \ |
| "\n -i,--interface=INTERFACE Interface to use (default eth0)" \ |
| "\n -H,-h,--hostname=HOSTNAME Client hostname" \ |
| "\n -c,--clientid=CLIENTID Client identifier" \ |
| "\n -C,--clientid-none Suppress default client identifier" \ |
| "\n -p,--pidfile=file Create pidfile" \ |
| "\n -r,--request=IP IP address to request" \ |
| "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ |
| "\n -t,--retries=N Send up to N request packets" \ |
| "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \ |
| "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \ |
| "\n -f,--foreground Run in foreground" \ |
| "\n -b,--background Background if lease is not immediately obtained" \ |
| "\n -S,--syslog Log to syslog too" \ |
| "\n -n,--now Exit with failure if lease is not immediately obtained" \ |
| "\n -q,--quit Quit after obtaining lease" \ |
| "\n -R,--release Release IP on quit" \ |
| USE_FEATURE_UDHCPC_ARPING( \ |
| "\n -a,--arping Use arping to validate offered address" \ |
| ) \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| " -V CLASSID Vendor class identifier" \ |
| "\n -i INTERFACE Interface to use (default: eth0)" \ |
| "\n -H,-h HOSTNAME Client hostname" \ |
| "\n -c CLIENTID Client identifier" \ |
| "\n -C Suppress default client identifier" \ |
| "\n -p file Create pidfile" \ |
| "\n -r IP IP address to request" \ |
| "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \ |
| "\n -t N Send up to N request packets" \ |
| "\n -T N Try to get a lease for N seconds (default 3)" \ |
| "\n -A N Wait N seconds (default 20) after failure" \ |
| "\n -f Run in foreground" \ |
| "\n -b Background if lease is not immediately obtained" \ |
| "\n -S Log to syslog too" \ |
| "\n -n Exit with failure if lease is not immediately obtained" \ |
| "\n -q Quit after obtaining lease" \ |
| "\n -R Release IP on quit" \ |
| USE_FEATURE_UDHCPC_ARPING( \ |
| "\n -a Use arping to validate offered address" \ |
| ) \ |
| ) |
| |
| #define udhcpd_trivial_usage \ |
| "[-fS] [configfile]" \ |
| |
| #define udhcpd_full_usage \ |
| "DHCP server" \ |
| "\n -f Run in foreground" \ |
| "\n -S Log to syslog too" |
| |
| #define umount_trivial_usage \ |
| "[flags] FILESYSTEM|DIRECTORY" |
| #define umount_full_usage \ |
| "Unmount file systems" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_UMOUNT_ALL( \ |
| "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \ |
| USE_FEATURE_MTAB_SUPPORT( \ |
| "\n -n Don't erase /etc/mtab entries") \ |
| "\n -r Try to remount devices as read-only if mount is busy" \ |
| "\n -l Lazy umount (detach filesystem)" \ |
| "\n -f Force umount (i.e., unreachable NFS server)" \ |
| USE_FEATURE_MOUNT_LOOP( \ |
| "\n -D Do not free loop device (if a loop device has been used)") |
| #define umount_example_usage \ |
| "$ umount /dev/hdc1\n" |
| |
| #define uname_trivial_usage \ |
| "[-amnrspv]" |
| #define uname_full_usage \ |
| "Print system information." \ |
| "\n\nOptions:\n" \ |
| " -a Print all\n" \ |
| " -m The machine (hardware) type\n" \ |
| " -n Hostname\n" \ |
| " -r OS release\n" \ |
| " -s OS name (default)\n" \ |
| " -p Processor type\n" \ |
| " -v OS version" |
| #define uname_example_usage \ |
| "$ uname -a\n" \ |
| "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" |
| |
| #define uncompress_trivial_usage \ |
| "[-c] [-f] [name...]" |
| #define uncompress_full_usage \ |
| "Uncompress .Z file[s]" \ |
| "\n\nOptions:\n" \ |
| " -c Extract to stdout\n" \ |
| " -f Overwrite an existing file" |
| |
| #define unexpand_trivial_usage \ |
| "[-f][-a][-t NUM] [FILE|-]" |
| #define unexpand_full_usage \ |
| "Convert spaces to tabs, writing to standard output." \ |
| "\n\nOptions:" \ |
| USE_FEATURE_UNEXPAND_LONG_OPTIONS( \ |
| "\n -a,--all Convert all blanks" \ |
| "\n -f,--first-only Convert only leading blanks" \ |
| "\n -t,--tabs=N Tabstops every N chars" \ |
| ) \ |
| SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \ |
| "\n -a Convert all blanks" \ |
| "\n -f Convert only leading blanks" \ |
| "\n -t N Tabstops every N chars" \ |
| ) |
| |
| #define uniq_trivial_usage \ |
| "[-fscdu]... [INPUT [OUTPUT]]" |
| #define uniq_full_usage \ |
| "Discard all but one of successive identical lines from INPUT\n" \ |
| "(or standard input), writing to OUTPUT (or standard output)" \ |
| "\n\nOptions:\n" \ |
| " -c Prefix lines by the number of occurrences\n" \ |
| " -d Only print duplicate lines\n" \ |
| " -u Only print unique lines\n" \ |
| " -f N Skip the first N fields\n" \ |
| " -s N Skip the first N chars (after any skipped fields)" |
| #define uniq_example_usage \ |
| "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" |
| |
| #define unix2dos_trivial_usage \ |
| "[option] [FILE]" |
| #define unix2dos_full_usage \ |
| "Convert FILE from unix format to dos format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, use stdin/stdout." \ |
| "\n\nOptions:\n" \ |
| " -u Output will be in UNIX format\n" \ |
| " -d Output will be in DOS format" |
| |
| #define unzip_trivial_usage \ |
| "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" |
| #define unzip_full_usage \ |
| "Extract files from ZIP archives" \ |
| "\n\nOptions:\n" \ |
| " -l List archive contents (with -q for short form)\n" \ |
| " -n Never overwrite existing files (default)\n" \ |
| " -o Overwrite files without prompting\n" \ |
| " -p Send output to stdout\n" \ |
| " -q Quiet\n" \ |
| " -x Exclude these files\n" \ |
| " -d Extract files into this directory" |
| |
| #define uptime_trivial_usage \ |
| "" |
| #define uptime_full_usage \ |
| "Display the time since the last boot" |
| #define uptime_example_usage \ |
| "$ uptime\n" \ |
| " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" |
| |
| #define usleep_trivial_usage \ |
| "N" |
| #define usleep_full_usage \ |
| "Pause for N microseconds" |
| #define usleep_example_usage \ |
| "$ usleep 1000000\n" \ |
| "[pauses for 1 second]\n" |
| |
| #define uudecode_trivial_usage \ |
| "[-o outfile] [infile]" |
| #define uudecode_full_usage \ |
| "Uudecode a file\n" \ |
| "NB: finds outfile name in uuencoded source unless -o is given" |
| #define uudecode_example_usage \ |
| "$ uudecode -o busybox busybox.uu\n" \ |
| "$ ls -l busybox\n" \ |
| "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" |
| |
| #define uuencode_trivial_usage \ |
| "[-m] [infile] stored_filename" |
| #define uuencode_full_usage \ |
| "Uuencode a file to stdout" \ |
| "\n\nOptions:\n" \ |
| " -m Use base64 encoding per RFC1521" |
| #define uuencode_example_usage \ |
| "$ uuencode busybox busybox\n" \ |
| "begin 755 busybox\n" \ |
| "<encoded file snipped>\n" \ |
| "$ uudecode busybox busybox > busybox.uu\n" \ |
| "$\n" |
| |
| #define vconfig_trivial_usage \ |
| "COMMAND [OPTIONS]..." |
| #define vconfig_full_usage \ |
| "Create and remove virtual ethernet devices" \ |
| "\n\nOptions:\n" \ |
| " add [interface-name] [vlan_id]\n" \ |
| " rem [vlan-name]\n" \ |
| " set_flag [interface-name] [flag-num] [0 | 1]\n" \ |
| " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ |
| " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ |
| " set_name_type [name-type]" |
| |
| #define vi_trivial_usage \ |
| "[OPTION] [FILE]..." |
| #define vi_full_usage \ |
| "Edit FILE" \ |
| "\n\nOptions:\n" \ |
| " -R Read-only - do not write to the file" |
| |
| #define vlock_trivial_usage \ |
| "[OPTIONS]" |
| #define vlock_full_usage \ |
| "Lock a virtual terminal. A password is required to unlock." \ |
| "\n\nOptions:\n" \ |
| " -a Lock all VTs" |
| |
| #define watch_trivial_usage \ |
| "[-n seconds] [-t] COMMAND..." |
| #define watch_full_usage \ |
| "Execute a program periodically" \ |
| "\n\nOptions:\n" \ |
| " -n Loop period in seconds (default 2)\n" \ |
| " -t Don't print header" |
| #define watch_example_usage \ |
| "$ watch date\n" \ |
| "Mon Dec 17 10:31:40 GMT 2000\n" \ |
| "Mon Dec 17 10:31:42 GMT 2000\n" \ |
| "Mon Dec 17 10:31:44 GMT 2000" |
| |
| #define watchdog_trivial_usage \ |
| "[-t N[ms]] [-F] DEV" |
| #define watchdog_full_usage \ |
| "Periodically write to watchdog device DEV" \ |
| "\n\nOptions:" \ |
| "\n -t N Timer period (default 30)" \ |
| "\n -F Run in foreground" \ |
| "\n" \ |
| "\nUse -t 500ms to specify period in milliseconds" |
| |
| #define wc_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define wc_full_usage \ |
| "Print line, word, and byte counts for each FILE, and a total line if\n" \ |
| "more than one FILE is specified. With no FILE, read standard input." \ |
| "\n\nOptions:\n" \ |
| " -c Print the byte counts\n" \ |
| " -l Print the newline counts\n" \ |
| " -L Print the length of the longest line\n" \ |
| " -w Print the word counts" |
| #define wc_example_usage \ |
| "$ wc /etc/passwd\n" \ |
| " 31 46 1365 /etc/passwd\n" |
| |
| #define wget_trivial_usage \ |
| USE_GETOPT_LONG( \ |
| "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \ |
| " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ |
| " [-U|--user-agent agent] url" \ |
| ) \ |
| SKIP_GETOPT_LONG( \ |
| "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \ |
| ) |
| #define wget_full_usage \ |
| "Retrieve files via HTTP or FTP" \ |
| "\n\nOptions:\n" \ |
| " -s Spider mode - only check file existence\n" \ |
| " -c Continue retrieval of aborted transfer\n" \ |
| " -q Quiet\n" \ |
| " -P Set directory prefix to DIR\n" \ |
| " -O Save to filename ('-' for stdout)\n" \ |
| " -U Adjust 'User-Agent' field\n" \ |
| " -Y Use proxy ('on' or 'off')" |
| |
| #define which_trivial_usage \ |
| "[COMMAND...]" |
| #define which_full_usage \ |
| "Locate a COMMAND" |
| #define which_example_usage \ |
| "$ which login\n" \ |
| "/bin/login\n" |
| |
| #define who_trivial_usage \ |
| "[-a]" |
| #define who_full_usage \ |
| "Show who is logged on" \ |
| "\n\nOptions:\n" \ |
| " -a show all" |
| |
| #define whoami_trivial_usage \ |
| "" |
| #define whoami_full_usage \ |
| "Print the user name associated with the current effective user id" |
| |
| #define xargs_trivial_usage \ |
| "[OPTIONS] [COMMAND] [ARGS...]" |
| #define xargs_full_usage \ |
| "Execute COMMAND on every item given by standard input" \ |
| "\n\nOptions:\n" \ |
| USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ |
| " -p Prompt the user about whether to run each command\n") \ |
| " -r Do not run command for empty read lines\n" \ |
| USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ |
| " -x Exit if the size is exceeded\n") \ |
| USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ |
| " -0 Input filenames are terminated by a null character\n") \ |
| " -t Print the command line on stderr before executing it" |
| #define xargs_example_usage \ |
| "$ ls | xargs gzip\n" \ |
| "$ find . -name '*.c' -print | xargs rm\n" |
| |
| #define yes_trivial_usage \ |
| "[OPTION]... [STRING]..." |
| #define yes_full_usage \ |
| "Repeatedly output a line with all specified STRING(s), or 'y'" |
| |
| #define zcat_trivial_usage \ |
| "FILE" |
| #define zcat_full_usage \ |
| "Uncompress to stdout" |
| |
| #define zcip_trivial_usage \ |
| "[OPTIONS] ifname script" |
| #define zcip_full_usage \ |
| "Manage a ZeroConf IPv4 link-local address" \ |
| "\n\nOptions:\n" \ |
| " -f Run in foreground\n" \ |
| " -q Quit after address (no daemon)\n" \ |
| " -r 169.254.x.x Request this address first\n" \ |
| " -v Verbose" |
| |
| #endif /* __BB_USAGE_H__ */ |