coreutils/od.c - codeaurora/busybox - Gitiles

 /* vi: set sw=4 ts=4: */
 /*
  * od implementation for busybox
  * Based on code from util-linux v 2.11l
  *
  * Copyright (c) 1990
  * The Regents of the University of California.  All rights reserved.
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  *
  * Original copyright notice is retained at the end of this file.
  */
 //config:config OD
 //config:	bool "od (11 kb)"
 //config:	default y
 //config:	help
 //config:	od is used to dump binary files in octal and other formats.

 //applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP))

 //kbuild:lib-$(CONFIG_OD) += od.o

 //usage:#if !ENABLE_DESKTOP
 //usage:#define od_trivial_usage
 //usage:       "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
 //usage:#define od_full_usage "\n\n"
 //usage:       "Print FILE (or stdin) unambiguously, as octal bytes by default"
 //usage:#endif

 #include "libbb.h"
 #if ENABLE_DESKTOP
 /* This one provides -t (busybox's own build script needs it) */
 #include "od_bloaty.c"
 #else

 #include "dump.h"

 static void
 odoffset(dumper_t *dumper, int argc, char ***argvp)
 {
 	char *num, *p;
 	int base;
 	char *end;

 	/*
 	 * The offset syntax of od(1) was genuinely bizarre.  First, if
 	 * it started with a plus it had to be an offset.  Otherwise, if
 	 * there were at least two arguments, a number or lower-case 'x'
 	 * followed by a number makes it an offset.  By default it was
 	 * octal; if it started with 'x' or '0x' it was hex.  If it ended
 	 * in a '.', it was decimal.  If a 'b' or 'B' was appended, it
 	 * multiplied the number by 512 or 1024 byte units.  There was
 	 * no way to assign a block count to a hex offset.
 	 *
 	 * We assumes it's a file if the offset is bad.
 	 */
 	p = **argvp;

 	if (!p) {
 		/* hey someone is probably piping to us ... */
 		return;
 	}

 	if ((*p != '+')
 		&& (argc < 2
 			|| (!isdigit(p[0])
 				&& ((p[0] != 'x') || !isxdigit(p[1])))))
 		return;

 	base = 0;
 	/*
 	 * skip over leading '+', 'x[0-9a-fA-f]' or '0x', and
 	 * set base.
 	 */
 	if (p[0] == '+')
 		++p;
 	if (p[0] == 'x' && isxdigit(p[1])) {
 		++p;
 		base = 16;
 	} else if (p[0] == '0' && p[1] == 'x') {
 		p += 2;
 		base = 16;
 	}

 	/* skip over the number */
 	if (base == 16)
 		for (num = p; isxdigit(*p); ++p)
 			continue;
 	else
 		for (num = p; isdigit(*p); ++p)
 			continue;

 	/* check for no number */
 	if (num == p)
 		return;

 	/* if terminates with a '.', base is decimal */
 	if (*p == '.') {
 		if (base)
 			return;
 		base = 10;
 	}

 	dumper->dump_skip = strtol(num, &end, base ? base : 8);

 	/* if end isn't the same as p, we got a non-octal digit */
 	if (end != p)
 		dumper->dump_skip = 0;
 	else {
 		if (*p) {
 			if (*p == 'b') {
 				dumper->dump_skip *= 512;
 				++p;
 			} else if (*p == 'B') {
 				dumper->dump_skip *= 1024;
 				++p;
 			}
 		}
 		if (*p)
 			dumper->dump_skip = 0;
 		else {
 			++*argvp;
 			/*
 			 * If the offset uses a non-octal base, the base of
 			 * the offset is changed as well.  This isn't pretty,
 			 * but it's easy.
 			 */
 #define TYPE_OFFSET 7
 			{
 				char x_or_d;
 				if (base == 16) {
 					x_or_d = 'x';
 					goto DO_X_OR_D;
 				}
 				if (base == 10) {
 					x_or_d = 'd';
  DO_X_OR_D:
 					dumper->fshead->nextfu->fmt[TYPE_OFFSET]
 						= dumper->fshead->nextfs->nextfu->fmt[TYPE_OFFSET]
 						= x_or_d;
 				}
 			}
 		}
 	}
 }

 static const char *const add_strings[] ALIGN_PTR = {
 	"16/1 \"%3_u \" \"\\n\"",              /* a */
 	"8/2 \" %06o \" \"\\n\"",              /* B, o */
 	"16/1 \"%03o \" \"\\n\"",              /* b */
 	"16/1 \"%3_c \" \"\\n\"",              /* c */
 	"8/2 \"  %05u \" \"\\n\"",             /* d */
 	"4/4 \"     %010u \" \"\\n\"",         /* D */
 	"2/8 \"          %21.14e \" \"\\n\"",  /* e (undocumented in od), F */
 	"4/4 \" %14.7e \" \"\\n\"",            /* f */
 	"4/4 \"       %08x \" \"\\n\"",        /* H, X */
 	"8/2 \"   %04x \" \"\\n\"",            /* h, x */
 	"4/4 \"    %11d \" \"\\n\"",           /* I, L, l */
 	"8/2 \" %6d \" \"\\n\"",               /* i */
 	"4/4 \"    %011o \" \"\\n\"",          /* O */
 };

 static const char od_opts[] ALIGN1 = "aBbcDdeFfHhIiLlOoXxv";

 static const char od_o2si[] ALIGN1 = {
 	0, 1, 2, 3, 5,
 	4, 6, 6, 7, 8,
 	9, 0xa, 0xb, 0xa, 0xa,
 	0xb, 1, 8, 9,
 };

 int od_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
 int od_main(int argc, char **argv)
 {
 	int ch;
 	int first = 1;
 	char *p;
 	dumper_t *dumper = alloc_dumper();

 	while ((ch = getopt(argc, argv, od_opts)) > 0) {
 		if (ch == 'v') {
 			dumper->dump_vflag = ALL;
 		} else if (((p = strchr(od_opts, ch)) != NULL) && (*p != '\0')) {
 			if (first) {
 				first = 0;
 				bb_dump_add(dumper, "\"%07.7_Ao\n\"");
 				bb_dump_add(dumper, "\"%07.7_ao  \"");
 			} else {
 				bb_dump_add(dumper, "\"         \"");
 			}
 			bb_dump_add(dumper, add_strings[(int)od_o2si[(p - od_opts)]]);
 		} else {  /* P, p, s, w, or other unhandled */
 			bb_show_usage();
 		}
 	}
 	if (!dumper->fshead) {
 		bb_dump_add(dumper, "\"%07.7_Ao\n\"");
 		bb_dump_add(dumper, "\"%07.7_ao  \" 8/2 \"%06o \" \"\\n\"");
 	}

 	argc -= optind;
 	argv += optind;

 	odoffset(dumper, argc, &argv);

 	return bb_dump_dump(dumper, argv);
 }
 #endif /* ENABLE_DESKTOP */

 /*-
  * Copyright (c) 1990 The Regents of the University of California.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  * 3. Neither the name of the University nor the names of its contributors
  *    may be used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND
  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
	/* vi: set sw=4 ts=4: */
	/*
	* od implementation for busybox
	* Based on code from util-linux v 2.11l
	*
	* Copyright (c) 1990
	* The Regents of the University of California. All rights reserved.
	*
	* Licensed under GPLv2 or later, see file LICENSE in this source tree.
	*
	* Original copyright notice is retained at the end of this file.
	*/
	//config:config OD
	//config: bool "od (11 kb)"
	//config: default y
	//config: help
	//config: od is used to dump binary files in octal and other formats.

	//applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP))

	//kbuild:lib-$(CONFIG_OD) += od.o

	//usage:#if !ENABLE_DESKTOP
	//usage:#define od_trivial_usage
	//usage: "[-aBbcDdeFfHhIiLlOovXx] [FILE]"
	//usage:#define od_full_usage "\n\n"
	//usage: "Print FILE (or stdin) unambiguously, as octal bytes by default"
	//usage:#endif

	#include "libbb.h"
	#if ENABLE_DESKTOP
	/* This one provides -t (busybox's own build script needs it) */
	#include "od_bloaty.c"
	#else

	#include "dump.h"

	static void
	odoffset(dumper_t dumper, int argc, char **argvp)
	{
	char num, p;
	int base;
	char *end;

	/*
	* The offset syntax of od(1) was genuinely bizarre. First, if
	* it started with a plus it had to be an offset. Otherwise, if
	* there were at least two arguments, a number or lower-case 'x'
	* followed by a number makes it an offset. By default it was
	* octal; if it started with 'x' or '0x' it was hex. If it ended
	* in a '.', it was decimal. If a 'b' or 'B' was appended, it
	* multiplied the number by 512 or 1024 byte units. There was
	* no way to assign a block count to a hex offset.
	*
	* We assumes it's a file if the offset is bad.
	*/
	p = **argvp;

	if (!p) {
	/* hey someone is probably piping to us ... */
	return;
	}

	if ((*p != '+')
	&& (argc < 2
	\|\| (!isdigit(p[0])
	&& ((p[0] != 'x') \|\| !isxdigit(p[1])))))
	return;

	base = 0;
	/*
	* skip over leading '+', 'x[0-9a-fA-f]' or '0x', and
	* set base.
	*/
	if (p[0] == '+')
	++p;
	if (p[0] == 'x' && isxdigit(p[1])) {
	++p;
	base = 16;
	} else if (p[0] == '0' && p[1] == 'x') {
	p += 2;
	base = 16;
	}

	/* skip over the number */
	if (base == 16)
	for (num = p; isxdigit(*p); ++p)
	continue;
	else
	for (num = p; isdigit(*p); ++p)
	continue;

	/* check for no number */
	if (num == p)
	return;

	/* if terminates with a '.', base is decimal */
	if (*p == '.') {
	if (base)
	return;
	base = 10;
	}

	dumper->dump_skip = strtol(num, &end, base ? base : 8);

	/* if end isn't the same as p, we got a non-octal digit */
	if (end != p)
	dumper->dump_skip = 0;
	else {
	if (*p) {
	if (*p == 'b') {
	dumper->dump_skip *= 512;
	++p;
	} else if (*p == 'B') {
	dumper->dump_skip *= 1024;
	++p;
	}
	}
	if (*p)
	dumper->dump_skip = 0;
	else {
	++*argvp;
	/*
	* If the offset uses a non-octal base, the base of
	* the offset is changed as well. This isn't pretty,
	* but it's easy.
	*/
	#define TYPE_OFFSET 7
	{
	char x_or_d;
	if (base == 16) {
	x_or_d = 'x';
	goto DO_X_OR_D;
	}
	if (base == 10) {
	x_or_d = 'd';
	DO_X_OR_D:
	dumper->fshead->nextfu->fmt[TYPE_OFFSET]
	= dumper->fshead->nextfs->nextfu->fmt[TYPE_OFFSET]
	= x_or_d;
	}
	}
	}
	}
	}

	static const char *const add_strings[] ALIGN_PTR = {
	"16/1 \"%3_u \" \"\\n\"", /* a */
	"8/2 \" %06o \" \"\\n\"", /* B, o */
	"16/1 \"%03o \" \"\\n\"", /* b */
	"16/1 \"%3_c \" \"\\n\"", /* c */
	"8/2 \" %05u \" \"\\n\"", /* d */
	"4/4 \" %010u \" \"\\n\"", /* D */
	"2/8 \" %21.14e \" \"\\n\"", /* e (undocumented in od), F */
	"4/4 \" %14.7e \" \"\\n\"", /* f */
	"4/4 \" %08x \" \"\\n\"", /* H, X */
	"8/2 \" %04x \" \"\\n\"", /* h, x */
	"4/4 \" %11d \" \"\\n\"", /* I, L, l */
	"8/2 \" %6d \" \"\\n\"", /* i */
	"4/4 \" %011o \" \"\\n\"", /* O */
	};

	static const char od_opts[] ALIGN1 = "aBbcDdeFfHhIiLlOoXxv";

	static const char od_o2si[] ALIGN1 = {
	0, 1, 2, 3, 5,
	4, 6, 6, 7, 8,
	9, 0xa, 0xb, 0xa, 0xa,
	0xb, 1, 8, 9,
	};

	int od_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
	int od_main(int argc, char **argv)
	{
	int ch;
	int first = 1;
	char *p;
	dumper_t *dumper = alloc_dumper();

	while ((ch = getopt(argc, argv, od_opts)) > 0) {
	if (ch == 'v') {
	dumper->dump_vflag = ALL;
	} else if (((p = strchr(od_opts, ch)) != NULL) && (*p != '\0')) {
	if (first) {
	first = 0;
	bb_dump_add(dumper, "\"%07.7_Ao\n\"");
	bb_dump_add(dumper, "\"%07.7_ao \"");
	} else {
	bb_dump_add(dumper, "\" \"");
	}
	bb_dump_add(dumper, add_strings[(int)od_o2si[(p - od_opts)]]);
	} else { /* P, p, s, w, or other unhandled */
	bb_show_usage();
	}
	}
	if (!dumper->fshead) {
	bb_dump_add(dumper, "\"%07.7_Ao\n\"");
	bb_dump_add(dumper, "\"%07.7_ao \" 8/2 \"%06o \" \"\\n\"");
	}

	argc -= optind;
	argv += optind;

	odoffset(dumper, argc, &argv);

	return bb_dump_dump(dumper, argv);
	}
	#endif /* ENABLE_DESKTOP */

	/*-
	* Copyright (c) 1990 The Regents of the University of California.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the University nor the names of its contributors
	* may be used to endorse or promote products derived from this software
	* without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND
	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
	* SUCH DAMAGE.
	*/