libbb/Config.src - codeaurora/busybox - Gitiles

 #
 # For a description of the syntax of this configuration file,
 # see scripts/kbuild/config-language.txt.
 #

 menu "Busybox Library Tuning"

 INSERT

 config PASSWORD_MINLEN
 	int "Minimum password length"
 	default 6
 	range 5 32
 	help
 	  Minimum allowable password length.

 config MD5_SMALL
 	int "MD5: Trade bytes for speed (0:fast, 3:slow)"
 	default 1
 	range 0 3
 	help
 	  Trade binary size versus speed for the md5sum algorithm.
 	  Approximate values running uClibc and hashing
 	  linux-2.4.4.tar.bz2 were:
 	                    user times (sec)  text size (386)
 	  0 (fastest)         1.1                6144
 	  1                   1.4                5392
 	  2                   3.0                5088
 	  3 (smallest)        5.1                4912

 config FEATURE_FAST_TOP
 	bool "Faster /proc scanning code (+100 bytes)"
 	default y
 	help
 	  This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
 	  but code size is slightly bigger.

 config FEATURE_ETC_NETWORKS
 	bool "Support for /etc/networks"
 	default n
 	help
 	  Enable support for network names in /etc/networks. This is
 	  a rarely used feature which allows you to use names
 	  instead of IP/mask pairs in route command.

 config FEATURE_USE_TERMIOS
 	bool "Use termios to manipulate the screen"
 	default y
 	depends on MORE || TOP || POWERTOP
 	help
 	  This option allows utilities such as 'more' and 'top' to determine
 	  the size of the screen. If you leave this disabled, your utilities
 	  that display things on the screen will be especially primitive and
 	  will be unable to determine the current screen size, and will be
 	  unable to move the cursor.

 config FEATURE_EDITING
 	bool "Command line editing"
 	default y
 	help
 	  Enable line editing (mainly for shell command line).

 config FEATURE_EDITING_MAX_LEN
 	int "Maximum length of input"
 	range 128 8192
 	default 1024
 	depends on FEATURE_EDITING
 	help
 	  Line editing code uses on-stack buffers for storage.
 	  You may want to decrease this parameter if your target machine
 	  benefits from smaller stack usage.

 config FEATURE_EDITING_VI
 	bool "vi-style line editing commands"
 	default n
 	depends on FEATURE_EDITING
 	help
 	  Enable vi-style line editing. In shells, this mode can be
 	  turned on and off with "set -o vi" and "set +o vi".

 config FEATURE_EDITING_HISTORY
 	int "History size"
 	# Don't allow way too big values here, code uses fixed "char *history[N]" struct member
 	range 0 9999
 	default 255
 	depends on FEATURE_EDITING
 	help
 	  Specify command history size (0 - disable).

 config FEATURE_EDITING_SAVEHISTORY
 	bool "History saving"
 	default y
 	depends on FEATURE_EDITING
 	help
 	  Enable history saving in shells.

 config FEATURE_EDITING_SAVE_ON_EXIT
 	bool "Save history on shell exit, not after every command"
 	default n
 	depends on FEATURE_EDITING_SAVEHISTORY
 	help
 	  Save history on shell exit, not after every command.

 config FEATURE_REVERSE_SEARCH
 	bool "Reverse history search"
 	default y
 	depends on FEATURE_EDITING_SAVEHISTORY
 	help
 	  Enable readline-like Ctrl-R combination for reverse history search.
 	  Increases code by about 0.5k.

 config FEATURE_TAB_COMPLETION
 	bool "Tab completion"
 	default y
 	depends on FEATURE_EDITING
 	help
 	  Enable tab completion.

 config FEATURE_USERNAME_COMPLETION
 	bool "Username completion"
 	default n
 	depends on FEATURE_TAB_COMPLETION
 	help
 	  Enable username completion.

 config FEATURE_EDITING_FANCY_PROMPT
 	bool "Fancy shell prompts"
 	default y
 	depends on FEATURE_EDITING
 	help
 	  Setting this option allows for prompts to use things like \w and
 	  \$ and escape codes.

 config FEATURE_EDITING_ASK_TERMINAL
 	bool "Query cursor position from terminal"
 	default n
 	depends on FEATURE_EDITING
 	help
 	  Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
 	  current cursor position. This information is used to make line
 	  editing more robust in some cases.
 	  If you are not sure whether your terminals respond to this code
 	  correctly, or want to save on code size (about 400 bytes),
 	  then do not turn this option on.

 config FEATURE_NON_POSIX_CP
 	bool "Non-POSIX, but safer, copying to special nodes"
 	default y
 	help
 	  With this option, "cp file symlink" will delete symlink
 	  and create a regular file. This does not conform to POSIX,
 	  but prevents a symlink attack.
 	  Similarly, "cp file device" will not send file's data
 	  to the device. (To do that, use "cat file >device")

 config FEATURE_VERBOSE_CP_MESSAGE
 	bool "Give more precise messages when copy fails (cp, mv etc)"
 	default n
 	help
 	  Error messages with this feature enabled:
 	    $ cp file /does_not_exist/file
 	    cp: cannot create '/does_not_exist/file': Path does not exist
 	    $ cp file /vmlinuz/file
 	    cp: cannot stat '/vmlinuz/file': Path has non-directory component
 	  If this feature is not enabled, they will be, respectively:
 	    cp: cannot create '/does_not_exist/file': No such file or directory
 	    cp: cannot stat '/vmlinuz/file': Not a directory
 	  This will cost you ~60 bytes.

 config FEATURE_COPYBUF_KB
 	int "Copy buffer size, in kilobytes"
 	range 1 1024
 	default 4
 	help
 	  Size of buffer used by cp, mv, install, wget etc.
 	  Buffers which are 4 kb or less will be allocated on stack.
 	  Bigger buffers will be allocated with mmap, with fallback to 4 kb
 	  stack buffer if mmap fails.

 config FEATURE_SKIP_ROOTFS
 	bool "Skip rootfs in mount table"
 	default y
 	help
 	  Ignore rootfs entry in mount table.

 	  In Linux, kernel has a special filesystem, rootfs, which is initially
 	  mounted on /. It contains initramfs data, if kernel is configured
 	  to have one. Usually, another file system is mounted over / early
 	  in boot process, and therefore most tools which manipulate
 	  mount table, such as df, will skip rootfs entry.

 	  However, some systems do not mount anything on /.
 	  If you need to configure busybox for one of these systems,
 	  you may find it useful to turn this option off to make df show
 	  initramfs statistics.

 	  Otherwise, choose Y.

 config MONOTONIC_SYSCALL
 	bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
 	default n
 	select PLATFORM_LINUX
 	help
 	  Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
 	  time intervals (time, ping, traceroute etc need this).
 	  Probably requires Linux 2.6+. If not selected, gettimeofday
 	  will be used instead (which gives wrong results if date/time
 	  is reset).

 config IOCTL_HEX2STR_ERROR
 	bool "Use ioctl names rather than hex values in error messages"
 	default y
 	help
 	  Use ioctl names rather than hex values in error messages
 	  (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
 	  saves about 1400 bytes.

 config FEATURE_HWIB
 	bool "Support infiniband HW"
 	default y
 	help
 	  Support for printing infiniband addresses in
 	  network applets.

 endmenu
	#
	# For a description of the syntax of this configuration file,
	# see scripts/kbuild/config-language.txt.
	#

	menu "Busybox Library Tuning"

	INSERT

	config PASSWORD_MINLEN
	int "Minimum password length"
	default 6
	range 5 32
	help
	Minimum allowable password length.

	config MD5_SMALL
	int "MD5: Trade bytes for speed (0:fast, 3:slow)"
	default 1
	range 0 3
	help
	Trade binary size versus speed for the md5sum algorithm.
	Approximate values running uClibc and hashing
	linux-2.4.4.tar.bz2 were:
	user times (sec) text size (386)
	0 (fastest) 1.1 6144
	1 1.4 5392
	2 3.0 5088
	3 (smallest) 5.1 4912

	config FEATURE_FAST_TOP
	bool "Faster /proc scanning code (+100 bytes)"
	default y
	help
	This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
	but code size is slightly bigger.

	config FEATURE_ETC_NETWORKS
	bool "Support for /etc/networks"
	default n
	help
	Enable support for network names in /etc/networks. This is
	a rarely used feature which allows you to use names
	instead of IP/mask pairs in route command.

	config FEATURE_USE_TERMIOS
	bool "Use termios to manipulate the screen"
	default y
	depends on MORE \|\| TOP \|\| POWERTOP
	help
	This option allows utilities such as 'more' and 'top' to determine
	the size of the screen. If you leave this disabled, your utilities
	that display things on the screen will be especially primitive and
	will be unable to determine the current screen size, and will be
	unable to move the cursor.

	config FEATURE_EDITING
	bool "Command line editing"
	default y
	help
	Enable line editing (mainly for shell command line).

	config FEATURE_EDITING_MAX_LEN
	int "Maximum length of input"
	range 128 8192
	default 1024
	depends on FEATURE_EDITING
	help
	Line editing code uses on-stack buffers for storage.
	You may want to decrease this parameter if your target machine
	benefits from smaller stack usage.

	config FEATURE_EDITING_VI
	bool "vi-style line editing commands"
	default n
	depends on FEATURE_EDITING
	help
	Enable vi-style line editing. In shells, this mode can be
	turned on and off with "set -o vi" and "set +o vi".

	config FEATURE_EDITING_HISTORY
	int "History size"
	# Don't allow way too big values here, code uses fixed "char *history[N]" struct member
	range 0 9999
	default 255
	depends on FEATURE_EDITING
	help
	Specify command history size (0 - disable).

	config FEATURE_EDITING_SAVEHISTORY
	bool "History saving"
	default y
	depends on FEATURE_EDITING
	help
	Enable history saving in shells.

	config FEATURE_EDITING_SAVE_ON_EXIT
	bool "Save history on shell exit, not after every command"
	default n
	depends on FEATURE_EDITING_SAVEHISTORY
	help
	Save history on shell exit, not after every command.

	config FEATURE_REVERSE_SEARCH
	bool "Reverse history search"
	default y
	depends on FEATURE_EDITING_SAVEHISTORY
	help
	Enable readline-like Ctrl-R combination for reverse history search.
	Increases code by about 0.5k.

	config FEATURE_TAB_COMPLETION
	bool "Tab completion"
	default y
	depends on FEATURE_EDITING
	help
	Enable tab completion.

	config FEATURE_USERNAME_COMPLETION
	bool "Username completion"
	default n
	depends on FEATURE_TAB_COMPLETION
	help
	Enable username completion.

	config FEATURE_EDITING_FANCY_PROMPT
	bool "Fancy shell prompts"
	default y
	depends on FEATURE_EDITING
	help
	Setting this option allows for prompts to use things like \w and
	\$ and escape codes.

	config FEATURE_EDITING_ASK_TERMINAL
	bool "Query cursor position from terminal"
	default n
	depends on FEATURE_EDITING
	help
	Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
	current cursor position. This information is used to make line
	editing more robust in some cases.
	If you are not sure whether your terminals respond to this code
	correctly, or want to save on code size (about 400 bytes),
	then do not turn this option on.

	config FEATURE_NON_POSIX_CP
	bool "Non-POSIX, but safer, copying to special nodes"
	default y
	help
	With this option, "cp file symlink" will delete symlink
	and create a regular file. This does not conform to POSIX,
	but prevents a symlink attack.
	Similarly, "cp file device" will not send file's data
	to the device. (To do that, use "cat file >device")

	config FEATURE_VERBOSE_CP_MESSAGE
	bool "Give more precise messages when copy fails (cp, mv etc)"
	default n
	help
	Error messages with this feature enabled:
	$ cp file /does_not_exist/file
	cp: cannot create '/does_not_exist/file': Path does not exist
	$ cp file /vmlinuz/file
	cp: cannot stat '/vmlinuz/file': Path has non-directory component
	If this feature is not enabled, they will be, respectively:
	cp: cannot create '/does_not_exist/file': No such file or directory
	cp: cannot stat '/vmlinuz/file': Not a directory
	This will cost you ~60 bytes.

	config FEATURE_COPYBUF_KB
	int "Copy buffer size, in kilobytes"
	range 1 1024
	default 4
	help
	Size of buffer used by cp, mv, install, wget etc.
	Buffers which are 4 kb or less will be allocated on stack.
	Bigger buffers will be allocated with mmap, with fallback to 4 kb
	stack buffer if mmap fails.

	config FEATURE_SKIP_ROOTFS
	bool "Skip rootfs in mount table"
	default y
	help
	Ignore rootfs entry in mount table.

	In Linux, kernel has a special filesystem, rootfs, which is initially
	mounted on /. It contains initramfs data, if kernel is configured
	to have one. Usually, another file system is mounted over / early
	in boot process, and therefore most tools which manipulate
	mount table, such as df, will skip rootfs entry.

	However, some systems do not mount anything on /.
	If you need to configure busybox for one of these systems,
	you may find it useful to turn this option off to make df show
	initramfs statistics.

	Otherwise, choose Y.

	config MONOTONIC_SYSCALL
	bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
	default n
	select PLATFORM_LINUX
	help
	Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
	time intervals (time, ping, traceroute etc need this).
	Probably requires Linux 2.6+. If not selected, gettimeofday
	will be used instead (which gives wrong results if date/time
	is reset).

	config IOCTL_HEX2STR_ERROR
	bool "Use ioctl names rather than hex values in error messages"
	default y
	help
	Use ioctl names rather than hex values in error messages
	(e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
	saves about 1400 bytes.

	config FEATURE_HWIB
	bool "Support infiniband HW"
	default y
	help
	Support for printing infiniband addresses in
	network applets.

	endmenu