| # |
| # For a description of the syntax of this configuration file, |
| # see scripts/kbuild/config-language.txt. |
| # |
| |
| mainmenu "BusyBox Configuration" |
| |
| config HAVE_DOT_CONFIG |
| bool |
| default y |
| |
| menu "Busybox Settings" |
| |
| menu "General Configuration" |
| |
| config CONFIG_NITPICK |
| bool "See lots more (probably unnecessary) configuration options." |
| default n |
| help |
| Some BusyBox applets have more configuration options than anyone |
| will ever care about. To avoid drowining people in complexity, most |
| of the applet features that can be set to a sane default value are |
| hidden, unless you hit the above switch. |
| |
| This is better than to telling people to edit the busybox source |
| code, but not by much. |
| |
| See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet |
| |
| You have been warned. |
| |
| choice |
| prompt "Buffer allocation policy" |
| default CONFIG_FEATURE_BUFFERS_USE_MALLOC |
| depends on CONFIG_NITPICK |
| help |
| There are 3 ways BusyBox can handle buffer allocations: |
| - Use malloc. This costs code size for the call to xmalloc. |
| - Put them on stack. For some very small machines with limited stack |
| space, this can be deadly. For most folks, this works just fine. |
| - Put them in BSS. This works beautifully for computers with a real |
| MMU (and OS support), but wastes runtime RAM for uCLinux. This |
| behavior was the only one available for BusyBox versions 0.48 and |
| earlier. |
| |
| config CONFIG_FEATURE_BUFFERS_USE_MALLOC |
| bool "Allocate with Malloc" |
| |
| config CONFIG_FEATURE_BUFFERS_GO_ON_STACK |
| bool "Allocate on the Stack" |
| |
| config CONFIG_FEATURE_BUFFERS_GO_IN_BSS |
| bool "Allocate in the .bss section" |
| |
| endchoice |
| |
| config CONFIG_SHOW_USAGE |
| bool "Show terse applet usage messages" |
| default y |
| help |
| All BusyBox applets will show help messages when invoked with |
| wrong arguments. You can turn off printing these terse usage |
| messages if you say no here. |
| This will save you up to 7k. |
| |
| config CONFIG_FEATURE_VERBOSE_USAGE |
| bool "Show verbose applet usage messages" |
| default n |
| select CONFIG_SHOW_USAGE |
| help |
| All BusyBox applets will show more verbose help messages when |
| busybox is invoked with --help. This will add a lot of text to the |
| busybox binary. In the default configuration, this will add about |
| 13k, but it can add much more depending on your configuration. |
| |
| config CONFIG_FEATURE_COMPRESS_USAGE |
| bool "Store applet usage messages in compressed form" |
| default y |
| depends on CONFIG_SHOW_USAGE |
| help |
| Store usage messages in compressed form, uncompress them on-the-fly |
| when <applet> --help is called. |
| |
| If you have a really tiny busybox with few applets enabled (and |
| bunzip2 isn't one of them), the overhead of the decompressor might |
| be noticeable. Also, if you run executables directly from ROM |
| and have very little memory, this might not be a win. Otherwise, |
| you probably want this. |
| |
| config CONFIG_FEATURE_INSTALLER |
| bool "Support --install [-s] to install applet links at runtime" |
| default n |
| help |
| Enable 'busybox --install [-s]' support. This will allow you to use |
| busybox at runtime to create hard links or symlinks for all the |
| applets that are compiled into busybox. This feature requires the |
| /proc filesystem. |
| |
| config CONFIG_LOCALE_SUPPORT |
| bool "Enable locale support (system needs locale for this to work)" |
| default n |
| help |
| Enable this if your system has locale support and you would like |
| busybox to support locale settings. |
| |
| config CONFIG_GETOPT_LONG |
| bool |
| default y |
| # bool "Enable support for --long-options" |
| # default n |
| # help |
| # Enable this if you want busybox applets to use the gnu --long-option |
| # style, in addition to single character -a -b -c style options. |
| |
| config CONFIG_FEATURE_DEVPTS |
| bool "Use the devpts filesystem for Unix98 PTYs" |
| default y |
| help |
| Enable if you want BusyBox to use Unix98 PTY support. If enabled, |
| busybox will use /dev/ptmx for the master side of the pseudoterminal |
| and /dev/pts/<number> for the slave side. Otherwise, BSD style |
| /dev/ttyp<number> will be used. To use this option, you should have |
| devpts mounted. |
| |
| config CONFIG_FEATURE_CLEAN_UP |
| bool "Clean up all memory before exiting (usually not needed)" |
| default n |
| depends on CONFIG_NITPICK |
| help |
| As a size optimization, busybox normally exits without explicitly |
| freeing dynamically allocated memory or closing files. This saves |
| space since the OS will clean up for us, but it can confuse debuggers |
| like valgrind, which report tons of memory and resource leaks. |
| |
| Don't enable this unless you have a really good reason to clean |
| things up manually. |
| |
| config CONFIG_FEATURE_SUID |
| bool "Support for SUID/SGID handling" |
| default n |
| help |
| With this option you can install the busybox binary belonging |
| to root with the suid bit set, and it'll and it'll automatically drop |
| priviledges for applets that don't need root access. |
| |
| If you're really paranoid and don't want to do this, build two |
| busybox binaries with different applets in them (and the appropriate |
| symlinks pointing to each binary), and only set the suid bit on the |
| one that needs it. The applets currently marked to need the suid bit |
| are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs, |
| and vlock. |
| |
| config CONFIG_FEATURE_SYSLOG |
| bool "Support for syslog" |
| default n |
| help |
| This option is auto-selected when you select any applet which may |
| send its output to syslog. You do not need to select it manually. |
| |
| config CONFIG_FEATURE_SUID_CONFIG |
| bool "Runtime SUID/SGID configuration via /etc/busybox.conf" |
| default n if CONFIG_FEATURE_SUID |
| depends on CONFIG_FEATURE_SUID |
| help |
| Allow the SUID / SGID state of an applet to be determined at runtime |
| by checking /etc/busybox.conf. (This is sort of a poor man's sudo.) |
| The format of this file is as follows: |
| |
| <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>) |
| |
| An example might help: |
| |
| [SUID] |
| su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0 |
| su = ssx # exactly the same |
| |
| mount = sx- root.disk # applet mount can be run by root and members of group disk |
| # and runs with euid=0 |
| |
| cp = --- # disable applet cp for everyone |
| |
| The file has to be owned by user root, group root and has to be |
| writeable only by root: |
| (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf) |
| The busybox executable has to be owned by user root, group |
| root and has to be setuid root for this to work: |
| (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox) |
| |
| Robert 'sandman' Griebl has more information here: |
| <url: http://www.softforge.de/bb/suid.html >. |
| |
| config CONFIG_FEATURE_SUID_CONFIG_QUIET |
| bool "Suppress warning message if /etc/busybox.conf is not readable" |
| default y |
| depends on CONFIG_FEATURE_SUID_CONFIG |
| help |
| /etc/busybox.conf should be readable by the user needing the SUID, check |
| this option to avoid users to be notified about missing permissions. |
| |
| config CONFIG_SELINUX |
| bool "Support NSA Security Enhanced Linux" |
| default n |
| help |
| Enable support for SELinux in applets ls, ps, and id. Also provide |
| the option of compiling in SELinux applets. |
| |
| If you do not have a complete SELinux userland installed, this stuff |
| will not compile. Go visit |
| http://www.nsa.gov/selinux/index.html |
| to download the necessary stuff to allow busybox to compile with |
| this option enabled. Specifially, libselinux 1.28 or better is |
| directly required by busybox. If the installation is located in a |
| non-standard directory, provide it by invoking make as follows: |
| CFLAGS=-I<libselinux-include-path> \ |
| LDFLAGS=-L<libselinux-lib-path> \ |
| make |
| |
| Most people will leave this set to 'N'. |
| |
| config CONFIG_BUSYBOX_EXEC_PATH |
| string "Path to BusyBox executable" |
| default "/proc/self/exe" |
| help |
| When Busybox applets need to run other busybox applets, BusyBox |
| sometimes needs to exec() itself. When the /proc filesystem is |
| mounted, /proc/self/exe always points to the currently running |
| executable. If you haven't got /proc, set this to wherever you |
| want to run BusyBox from. |
| |
| endmenu |
| |
| menu 'Build Options' |
| |
| config CONFIG_STATIC |
| bool "Build BusyBox as a static binary (no shared libs)" |
| default n |
| help |
| If you want to build a static BusyBox binary, which does not |
| use or require any shared libraries, then enable this option. |
| This can cause BusyBox to be considerably larger, so you should |
| leave this option false unless you have a good reason (i.e. |
| your target platform does not support shared libraries, or |
| you are building an initrd which doesn't need anything but |
| BusyBox, etc). |
| |
| Most people will leave this set to 'N'. |
| |
| config CONFIG_BUILD_LIBBUSYBOX |
| bool "Build shared libbusybox" |
| default n |
| help |
| Build a shared library libbusybox.so which contains all |
| libraries used inside busybox. |
| |
| This is an experimental feature intended to support the upcoming |
| "make standalone" mode. Enabling it against the one big busybox |
| binary serves no purpose (and increases the size). You should |
| almost certainly say "no" to this right now. |
| |
| config CONFIG_FEATURE_FULL_LIBBUSYBOX |
| bool "Feature-complete libbusybox" |
| default n if !CONFIG_FEATURE_SHARED_BUSYBOX |
| depends on CONFIG_BUILD_LIBBUSYBOX |
| help |
| Build a libbusybox with the complete feature-set, disregarding |
| the actually selected config. |
| |
| Normally, libbusybox will only contain the features which are |
| used by busybox itself. If you plan to write a separate |
| standalone application which uses libbusybox say 'Y'. |
| |
| Note: libbusybox is GPL, not LGPL, and exports no stable API that |
| might act as a copyright barrier. We can and will modify the |
| exported function set between releases (even minor version number |
| changes), and happily break out-of-tree features. |
| |
| Say 'N' if in doubt. |
| |
| config CONFIG_FEATURE_SHARED_BUSYBOX |
| bool "Use shared libbusybox for busybox" |
| default y if CONFIG_BUILD_LIBBUSYBOX |
| depends on !CONFIG_STATIC && CONFIG_BUILD_LIBBUSYBOX |
| help |
| Use libbusybox.so also for busybox itself. |
| You need to have a working dynamic linker to use this variant. |
| |
| config CONFIG_LFS |
| bool "Build with Large File Support (for accessing files > 2 GB)" |
| default n |
| select FDISK_SUPPORT_LARGE_DISKS |
| help |
| If you want to build BusyBox with large file support, then enable |
| this option. This will have no effect if your kernel or your C |
| library lacks large file support for large files. Some of the |
| programs that can benefit from large file support include dd, gzip, |
| cp, mount, tar, and many others. If you want to access files larger |
| than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'. |
| |
| config CONFIG_BUILD_AT_ONCE |
| bool "Compile all sources at once" |
| default n |
| help |
| Normally each source-file is compiled with one invocation of |
| the compiler. |
| If you set this option, all sources are compiled at once. |
| This gives the compiler more opportunities to optimize which can |
| result in smaller and/or faster binaries. |
| |
| Setting this option will consume alot of memory, e.g. if you |
| enable all applets with all features, gcc uses more than 300MB |
| RAM during compilation of busybox. |
| |
| This option is most likely only beneficial for newer compilers |
| such as gcc-4.1 and above. |
| |
| Say 'N' unless you know what you are doing. |
| |
| endmenu |
| |
| menu 'Debugging Options' |
| |
| config CONFIG_DEBUG |
| bool "Build BusyBox with extra Debugging symbols" |
| default n |
| help |
| Say Y here if you wish to examine BusyBox internals while applets are |
| running. This increases the size of the binary considerably, and |
| should only be used when doing development. If you are doing |
| development and want to debug BusyBox, answer Y. |
| |
| Most people should answer N. |
| |
| config CONFIG_DEBUG_PESSIMIZE |
| bool "Disable compiler optimizations." |
| default n |
| depends on CONFIG_DEBUG |
| help |
| The compiler's optimization of source code can eliminate and reorder |
| code, resulting in an executable that's hard to understand when |
| stepping through it with a debugger. This switches it off, resulting |
| in a much bigger executable that more closely matches the source |
| code. |
| |
| choice |
| prompt "Additional debugging library" |
| default CONFIG_NO_DEBUG_LIB |
| depends on CONFIG_DEBUG |
| help |
| Using an additional debugging library will make BusyBox become |
| considerable larger and will cause it to run more slowly. You |
| should always leave this option disabled for production use. |
| |
| dmalloc support: |
| ---------------- |
| This enables compiling with dmalloc ( http://dmalloc.com/ ) |
| which is an excellent public domain mem leak and malloc problem |
| detector. To enable dmalloc, before running busybox you will |
| want to properly set your environment, for example: |
| export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile |
| The 'debug=' value is generated using the following command |
| dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \ |
| -p check-fence -p check-heap -p check-lists -p check-blank \ |
| -p check-funcs -p realloc-copy -p allow-free-null |
| |
| Electric-fence support: |
| ----------------------- |
| This enables compiling with Electric-fence support. Electric |
| fence is another very useful malloc debugging library which uses |
| your computer's virtual memory hardware to detect illegal memory |
| accesses. This support will make BusyBox be considerable larger |
| and run slower, so you should leave this option disabled unless |
| you are hunting a hard to find memory problem. |
| |
| |
| config CONFIG_NO_DEBUG_LIB |
| bool "None" |
| |
| config CONFIG_DMALLOC |
| bool "Dmalloc" |
| |
| config CONFIG_EFENCE |
| bool "Electric-fence" |
| |
| endchoice |
| |
| config CONFIG_DEBUG_YANK_SUSv2 |
| bool "Disable obsolete features removed before SUSv3?" |
| default y |
| help |
| This option will disable backwards compatibility with SuSv2, |
| specifically, old-style numeric options ('command -1 <file>') |
| will not be supported in head, tail, and fold. (Note: should |
| yank from renice too.) |
| |
| endmenu |
| |
| menu 'Installation Options' |
| |
| config CONFIG_INSTALL_NO_USR |
| bool "Don't use /usr" |
| default n |
| help |
| Disable use of /usr. Don't activate this option if you don't know |
| that you really want this behaviour. |
| |
| choice |
| prompt "Applets links" |
| default CONFIG_INSTALL_APPLET_SYMLINKS |
| help |
| Choose how you install applets links. |
| |
| config CONFIG_INSTALL_APPLET_SYMLINKS |
| bool "as soft-links" |
| help |
| Install applets as soft-links to the busybox binary. This needs some |
| free inodes on the filesystem, but might help with filesystem |
| generators that can't cope with hard-links. |
| |
| config CONFIG_INSTALL_APPLET_HARDLINKS |
| bool "as hard-links" |
| help |
| Install applets as hard-links to the busybox binary. This might count |
| on a filesystem with few inodes. |
| |
| config CONFIG_INSTALL_APPLET_DONT |
| bool |
| prompt "not installed" |
| depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL |
| help |
| Do not install applets links. Usefull when using the -install feature |
| or a standalone shell for rescue pruposes. |
| |
| endchoice |
| |
| config PREFIX |
| string "BusyBox installation prefix" |
| default "./_install" |
| help |
| Define your directory to install BusyBox files/subdirs in. |
| |
| endmenu |
| |
| source libbb/Config.in |
| |
| endmenu |
| |
| comment "Applets" |
| |
| source archival/Config.in |
| source coreutils/Config.in |
| source console-tools/Config.in |
| source debianutils/Config.in |
| source editors/Config.in |
| source findutils/Config.in |
| source init/Config.in |
| source loginutils/Config.in |
| source e2fsprogs/Config.in |
| source modutils/Config.in |
| source util-linux/Config.in |
| source miscutils/Config.in |
| source networking/Config.in |
| source procps/Config.in |
| source shell/Config.in |
| source sysklogd/Config.in |